Combi Familyinstructions

QUICKYS Y S T E M

VIA VAIS Y S T E M

03

INSTRUCTIONS FOR USE

04 SELF ALIGNING FRONT WHEELS

HOW TO OPEN THE PUSHCHAIR HOW TO CLOSE THE PUSHCHAIR

01

02

01

02

ONONON

NO!

ONON

STOP

ON

OFF

OFF

OFF

OK!

Fig. 5a

Fig. 5b

05 REAR WHEELS WITH BRAKE 06

07

08

09

ASSEMBLING THE 5 POINT HARNESS ON THE PUSHCHAIR

03

04

05

PATENTED VIA VAI REMOVABLE SEAT UNIT

10

06

USING THE 5 POINT HARNESS

11 12 13

FITTING THE CARRYCOT ONTO THE PUSHCHAIR

14

15

07

USING THE CARRYCOT

16

18 19a 19b

17

clack!

clack!clack!clack!

20

AUTO FIXING KIT V483 (optional)

22

23

2120a

08

09

25

26

24

10

27

28

29

HOW TO FIT THE GROUP 0+ CAR SEAT TO THE PUSHCHAIR CHASSIS

11

IMPORTANT

29a

1

2

3

4

5

6

7

30 31

32

WINTER VERSION

12

33

SUMMER VERSION

34

35

13

14

36

RAINCOVER

37

38a

38b

MAINTENANCE

15

16

38c

SPARE PART

CHASSIS

39

17

18

GROUP 0+ CAR SEAT

40

CARRYCOT

41

ACCESSORIES

42

19

INSTRUCTIONS FOR USEIMPORTANT: Read the instructions carefully before using your pushchair andkeep safe for future reference. Your childs safety could be put at risk if youdo not follow the instructions. WARNING! It may be dangerous to leave yourchild unattended. IMPORTANT: Cam Il Mondo Del Bambino S.p.A reserve theright to alter or modify any product for technical or commercial reasonswithout prior notice. IMPORTANT: Only use the product for the purpose thatit was designed for. Should the product be used for any other purpose themanufacturer declines all responsibilty. Never use replacement parts otherthan those supplied or approved by Cam Il Mondo Del Bambino, as this couldcause damage to your pushchair and make it unsafe. This pushchair isdesigned for one child only. Never carry more than one child on thepushchair. This product has been designed for children from birth to 15 kgsof weight. WARNING! Do not use the seat unit of the pushchair with childrenyounger than 6 months WARNING! Never use a mattress thicker than 20 mmin the carrycot (optional). WARNING! Use the safety harness and the crotchstrap when your child can sit alone. WARNING! Always use the crotch strapin combination with the waist belt. WARNING! Make sure that all foldingmechanisms are correctly engaged before using the product. Correctlyengage the locking mechanism of the pushchair when you put in or removeyour child from the pushchair itself. This pushchair's chassis can be usedONLY with the carrycot and the car seat approved by the manufacturer andequipped with "QUICKY SYSTEM" mechanism.WARNING! Check that the prambody or seat unit attachment devices are correctly engaged before use.WARNING! Hanging bags or accessories on the handle of your stroller maycompromise the stability of the product. Do not load the shopping basketwith more than 2 kgs of weight. WARNING! This product is not suitable forrunning or skating. WARNING! The rear lever plate is fitted to helpmanoeuvre the pushchair up kerbs and other obstacles. Under NOcircumstances must this lever be used to stand on, or ride on by a secondchild, or be loaded with any other form of weight This could cause thepushchair to become unstable and possibly damaged.INSTRUCTIONS FOR USE1. HOW TO POSITION THE LINKED PUSHCHAIR HANDLE: Rotate the handle in an upward directionwhilst pressing simultaneously the two buttons marked “A” on either side of the linked handle.2.HOW TO OPEN THE PUSHCHAIR: To open the pushchair raise lever “B” situated on the left handside of the pushchair in an upward direction as shown by the arrow (PART B), and then pushdownwards on the central part of the rear leverage plate “S”, until it reaches the locked position.The rear leverage plate (PART “S”) is to help you manoeuvre small obstacles and must not be usedto stand on, or ride on by a second child, or be loaded with any other form of weight as this couldcause the pushchair to become unstable and possibly damaged.3. HOW TO CLOSE THE PUSHCHAIR: To close the pushchair raise levers “A”, and push upwardssimultaneously on the underside of the central part of the rear leverage plate “R” with the tip ofyour foot, then to finalise the closure of the pushchair pull up on handle “B” in the centre backof the chassis until it reaches the locked position. To further reduce the height of the pushchair,push buttons “A” situated on either side of the linked handle, and rotate downwards as shownin the diagram. By pressing buttons “A” you can also adjust the height of the linked handle tosuit the needs of the person using the pushchair.4. SELF ALIGNING FRONT WHEELS The front wheels can be set In the fixed or swivel position. To

release the wheels push the ON pedal in the downwards position (fig 4a). To disengage the swivelmechanism push down on the OFF pedal. The wheels will then automatically self align oncethey reach the correct position.5. REAR WHEELS WITH BRAKE To engage the linked brake push the ON pedal downwards (fig 5a)to disengage the linked brake push the OFF pedal downwards (fig 5b). ATTENTION! Never liftlever “ON” when you want to release the brake.6. ADJUSTING THE BACKREST To adjust the backrest pull lever E upwards until you reach thedesired position (fig 6a). The backrest is reclinable in 4 positions. To raise the backrest simplypush upwards (fig 6b)7. ADJUSTING THE FOOTREST To lower the footrest raise lever F (Part b)and at the same timepush downwards on the footrest (fig 7).8. BUMPER BAR To remove the bumper bar push up on button R, situated under the armrest (fig8a). To replace the bumper bar simply push into the armrest until locked (fig 8c).ASSEMBLING THE 5 POINT HARNESS ON THE PUSHCHAIR9. Assemble the 5 point harness making sure that parts “D” and “E” of the 5 point harness passthrough the locking plastic part on the back of the pushchair, as shown in fig. 9.- FITTING THE CHEST PADS: insert buckles “A” in slot “a” (Fig.9A) and buckle “B” in slot “b” (fig. 9B).WARNING! Buckles must pass through the fabric slot and the rigid pushchair’s backrest (fig. 9C)so that it is correctly locked, as shown in fig. 9D.- FITTING THE CROTCH STRAP: insert buckle “C” in slot “c” (fig. 9E). WARNING! Buckle mustpass through the fabric slot and the rigid pushchair’s seat unit (FIG. 9F) so that it is correctlyfitted (FIG. 9G).- FITTING THE WAIST STRAP: to insert the “D” loop in the locking part “d” on the side of thepushchair (fig. 9) it is necessary to make pass the loop through the fabric slot placed on thebottom of the backrest (fig. 9H). Once the loop is correctly fitted, pull it and insert it in thelocking part “d”. Act in the same way for the other side of the pushchair.WARNING! Before usingthe pushchair, make sure the harnesses are not twisted and that they are correctly fitted on thepushchair.PATENTED VIA VAI REMOVABLE SEAT UNIT10. To fix and release the seat unit: Apply the brakes (fig 10a) and place the seat unit on to thechassis (fig 10b). Open out the side wings X to fix the seat unit to the chassis (fig 10c), insert thepins Y in to position (fig 10d), making sure the pins Z are correctly inplace (fig 10e). Push the seatunit down until you hear the click into position (fig 10f). Repeat the process on both sides.USING THE 5 POINT HARNESS11. Correct assembly of the 5 point.12. How to adjust the harness.13. How to open the buckkles.FITTING THE CARRYCOT ONTO THE PUSHCHAIR14. The carrycot is fitted with a quick lock/release system. Place the carrycot on the pushchairarmrests near the carrycot locking system “D” (on both sides) and on housings “E”. Push thecarrycot down until you hear a “click”. Make sure the carrycot is correctly locked.15. Operate button "A" and then "B" on the pushchair's armrests and then lift the carrycot.USING THE CARRYCOT16. Rocking base.17. Adjustable rigid handle, with anti-tilt safety mechanism.18. Ventilated base.19. Adjustable backrest: to raise (19/a), to lower (19/b).20. Fitting the hood.21. Removing the hood.

20

INSTRUCTIONS FOR USE

AUTO FIXING KIT V483 (optional)22. inserting the impact protectors.23. Abdominal safety belt assembl.24. Adjusting the abdominal safety belt.25. Correct positioning of the seat belts C and the metal plate D which must be placed as closeas possible to the base of the car seat.26. Seat belt.27. Correct positioning of the carrycot.ATTENTION The carrycot is approved as a Group 0 car seat, for babies from birth to 10kgs ECER 44 and must be fixed to the rear seat of the car only. If your carrycot is fitted with an adjustablebackrest this must be lowered to the lie flat position. Never place any objects on the rear of theback seat,as this could endanger your child when the brakes are applied. DO NOT make anyalterations. In case of alterations the manufacturer declines all responsibilty. NEVER LEAVE YOURCHILD UNATTENDED, even for the shortest time. Inform all passengers on how to free the babyincase of an accident or danger.The carrycot must be replaced in case of an accident. Be careful not to trap the belts in the doorsor tension mechanisms of the car. The carrycot must be securely fixed in the car at all times evenwhen the child is not travelling. Should any problems occur please contact the manufacturer.Prolonged exposure to sunlight may cause colours to fade and plastctics to soften. Dry all metalparts after exposure to rain to prevent thr formation of rust. Any fabrics that are washable willbe clearly marked, and must be hand washed at maximum 30°, then left to dry on a flat surfaceaway from direct sunlight.ONLY USE THE CARRYCOT IN CARS FITTED WITH A STATIC THREE POINT SAFETY BELT OR WITHHOMOLAGATED RETRACTING SEAT BELTS AS STATED IN ECE N°16. WHEN USING THE CARRYCOTIN YOUR CAR ALWAYS REMEMBER TO INSERT THE IMPACT ABSORBERS (POLYSTYRENE) INSIDE THECARRYCOT, AS THEY ARE FUNDAMENTAL FOR THE RESTRAINT SYSTEM. ALWAYS SECURE THECHILD WITH THE SAEFTY BELTS PROVIDED EVERY TIME THEY TRAVEL.HOW TO FIT THE GROUP 0+ CAR SEAT TO THE PUSHCHAIR CHASSIS28. Insert the pins on the car seat brackets into the slots on the armrests of the pushchair (fig 28).29. HOW TO REMOVE THE CAR SEAT FROM THE PUSHCHAIR CHASSIS. Press and release buttonA, then press and hold down button B at the same time as removing the car seat from thechassis. IMPORTANT: ALWAYS USE THE BUMPER BAR. IMPORTANT During the babies first fewmonths it is also possible to fit the carrycot or car seat whilst the pushchair seat unit is attached(SEE 29A). To fit the carrycot or car seat by means of the Quicky System simply lower thebackrest and unbutton the armrest covers. Proceed as previously illustrated.WINTER VERSION30. Carrycot’s apron can be used as footmuff on the pushchair (optional). Pls use as explainedin the figure.31. Fitting the hood.32. Unhooking the hood.33. Attaching the leg cover (optional), if included follow the instructions as in (Fig 33).WARNING! Always attach the fabric part of the hood to the rear part of the backrest.SUMMER VERSION34. Attaching the basket.35. Attaching the Suncanopy.36. Removing the Suncanopy.RAINCOVER37. Correct use of the universal raincover.IMPORTANTa. To be used in the presense of an adult;

21

INSTRUCTIONS FOR USE

b. Only to be used together with the hood or suncanopy.c. DO NOT use your raincover indoors, in strong sunshine, or near a heat source, your child mayoverheat.MAINTENANCE38. Improper use of this pushchair, on particularly dusty or dirty terrain may cause a malfunctionwith in the product, (opening and folding of the chassis, may not be as fluid, the front swivelwheel system may not be easily manoeuvrable...) It will be necessary to clean with a damp cloth,then dry thoroughly, and finally spray all working parts with a silicone spray. Pay particularattention to the parts highlighted in figures a, b, & c.CARE AND MAINTENANCE Prolonged exposure to direct sunlight may cause colours to fadeand plastics to soften and distort. Immediately after exposure to wet weather leave open and drywith a cloth to prevent the formation of rust.Washable fabrics are indicated and must be washedat a maximum 30°, then left to dry on a flat surface away from direct sunlight.WARNING: NEVER use replacement parts other than those approved or supplied by the Themanufacturer.OPTIONAL ACCESSORIES The presense of the raincover, adjustable backrest and Auto kit willdepend on the specific product purchased.SPARE PART

THIS PRODUCT HAS BEEN DESIGNED AND TESTED TO MEET THE SAFETYSTANDARD REQUIRED: EN 1888:2003

5 842009/5 Side plaque6B 842009/6B BLUE armrest6G 842009/6G GRAY armrest7 842009/7 Armrest plaque8 842009/8 Lower tube plaque9 842009/9 Obstacle step plaque10 842009/10 Rear plaque11 842009/11 Rear carrying handle12 842009/12 Seat unit13 842009/13 Front wheel group

14 842009/14 Rear wheel group withbrake unit

15 842009/15 Suncanopy frame16 842009/16 Suncanopy fabric17 842009/17 Fabric covered bumper bar18 842009/18 Bag19 842009/19 Fabric covering for seat

unit20 842009/20 height adjustment button

3940

4142

20 842009/20 Metal brackets for quickysystem mechanism

21 842009/21 Resin logo22 842009/22 Belt & buckle pads23 842009/23 Belt & buckle pads

24 842009/24 Crotch strap25 842009/25 Safety harness26 842009/26 Car seat fabric27 842009/27 Car seat hood

30 842009/30 Inside liner31 842009/31 Mattress32 842009/32 Carrycot apron33 842009/33 Carrycot hood fabric34 842009/34 Carrycot hood frame35 842009/35 Rocking base36 842009/36 Adjustable backrest handle

37B 842009/37B BLUE quicky systemcarrycot attachmentmechanism

37G 842009/37G GRAY quicky systemcarrycot attachmentmechanism

1 842009/1 Instruction manual2 842009/2 Basket

3 842009/3 5 point harness4 842009/4 Raincover

N CODE DESCRIPTION N CODE DESCRIPTION

22

INSTRUCTIONS FOR USE

ER27

12/0

8

BABYSTYLE UK LTD

36, Charles Street Sileby Loughborough LE12 7RJ UK

RESISTANT

Filling material(s) and covering

fabric(s) meet the requirements

for resistance to cigarette and

match ignition in

the 1988 safety regulations

CARELESSNESSCAUSES FIRE