calibration services brochure 2011

Testo Ltd has over 50 years of experience in the design, development and manufacture of

sensors and instrumentation. Building on this experience Testo Ltd has a fully equipped

service, calibration and repair centre run by an experienced team. Our UKAS (ISO/IEC

17025:2005) accredited laboratory calibrates a wide range of instrumentation within the

parameters of temperature, humidity and dew point.

We manage equipment inventories of varying quantities offering fixed term contracts with fast

turnaround times at competitive prices.

Laboratory Capabilities

Service and Calibration Centre

Our UKAS (ISO/IEC 17025:2005)accredited laboratory is equipped toprovide calibration for:

UKAS Calibration

•Temperature in the range of -70 to180°C

•Humidity from 10 to 90%rh in therange of 0.0 to 50.5°C

•Dew point/frost point in the range -25 to 48°C

T: 01420 544 433 • E: [email protected] • W: www.testo.co.uk • Shop: www.testodirect.co.uk

Our laboratory is also equipped to providecalibration traceable to national or internationalstandards for:

ISO calibration•Pressure – 0 to 70 bar, low pressure•Gas Analysis – O2, CO, NO, NO2, HC, SO2and CO2•Air velocity•Lux – 2 to 17,000 lux•Sound level•Current•Voltage•Resistance simulation – 4 wire, 2-3 wire•RPM•On-Site Calibration

Testo Pneumator - Pressure Calibrator and Measuring Instrument

The Testo Pneumator is a precision pressure calibration and measuring instrument that can be

used for stationary applications (in a laboratory) and as a portable calibrator. It is fully programmable

to aid calibration, combining high accuracy with simple functionality and reliable battery operation.

Application uses range from laboratory, cleanroom, air conditioning and process control.

� High accuracy even in lower Pa range

� Long term battery operation for mobileapplications

� High zero point stability due to automaticadjustment

� Fast provision of differential and relativepressures in calibration mode

� Programmable pressure sequences

� Wide selection of pressure, volume flowand flow velocity units.

Measuring range 4 types (1, 10, 100, 1000 hPa)

Measurementinaccuracy

0.3% of scale ± 1 digit (meas range 1hPa), 0.1% of scale ± 1 digit (measrange 10, 100, 1000 hPa)

Linearity 0.2% of scale ± 1 digit (meas range 1hPa), 0.1% of scale ± 1 digit (measrange 10, 100, 1000 hPa)

Temperature drift int.reference sensor

Zero point: 0.03% of scale/K (0% byzero point adjustment) Span: 0.03% ofscale/K

Working temp range +10° to +40°C

Storage temp range -10° to +70°C

Technical Data

Accessories Part Number Price £

Transport Case 0519 0849 £540.00

Part Number Price £

1hPa 0519 0816 / 10hPa 0519 0817 / 100hPa 0519 0818 / 1000hPa 0519 0819 £5,900.00


Testo Huminator - High Precision Humidity Chamber

The Testo Huminator allows quick and easy calibration of Testo and non Testo branded

humidity measuring instruments, probes and data loggers. A high performance, stand alone

temperature and humidity reference generator featuring a thermal servo system to guarantee

stable humidities at temperatures in the range of 15 to 40 ⁰C.

�� Front panel allows calibration of up to 4 humidity probes simultaneously

� Simple menu for setting parameters

� RS-232 interface

� Easy to read graphic display

Huminator Kit

Includes Huminator, sensor and 15 probe

adapters

Temperature range 15 to 40°C

Humidity range 5 to 95%RH

Dimension meas.chamber

ca. 147 mm diameterprobe depth 170 mm

Accuracy Temperature 0.5°C (10-85%RH at 25°C)Humidity 2%RH (10-85%RH at 25°C)

Stability 0.2°C (10-85%RH at 25°C)

Technical Data

Part Number 0519 0801

Price £9,894.00




Flue Gas Analysers Service & CalibrationDescription Part Number Price £Standard yearly service and ISO calibration for Testo 325, Testo 327 and Testo 330analysers. Includes pick up and return service and 3 working day turnaround time*

300000 0010 79.00

Express yearly service and ISO calibration for Testo 325, Testo 327 and Testo 330analysers. Includes pick up and return service and 36 hour turnaround time*

300000 0030 106.00

We offer warranty & service contracts for our Testo 327 &

Testo 330LL Flue Gas Analysers.

� Costs are fixed for five years - no nasty surprises!

� Payment is annual and invoiced at the time of service and isspread evenly over the contract period

� For the Testo 327, the warranty period is extended to 5 years

� Price includes cost of calibrating the unit and the issue of anISO certificate valid for 12 months

� Carriage return is at a preferential cost of £7.50

The following packages are available:

For our range of flue gas analysers we offer a pick up and return service and guaranteed 3 day or 36

hour turnaround time. Arrange online at www.testodirect.co.uk or call 01420 566 845.

� Pick up and return is included in the price – we provide a label and our courier collects from you

� Turnaround time is guaranteed – or you don’t pay*

�No annual commitment

The following services are available:

Fixed Price 5 Year Service Contracts & Extended Warranties

Servicing and Repair

Fixed Price 5 Year ContractsDescription Part Number Price £

Testo 327 5 Year Service Contract and Extended Warranty5 year extended no catch warranty (on instrument and sensors), annual service andcalibration and replacement cells where needed. Annual price fixed for 5 years.Payable annually after first year**.

300000 3272 99.00

Testo 330LL 5 Year Service Contract5 year annual service and calibration contract. Annual price fixed for 5 years.Payable annually after first year**.

300000 3273 90.00


* Terms apply, Guaranteed turnaround time from receipt of your approval to proceed to despatch from our service & calibration facility. Onlyapplies to standard service and calibration of Testo 327, 330 & 325. ** Conditions apply, call for details.

We are able to service and calibrate a range of instruments at your own premises resulting in

reduced turnaround time and improved efficiency. If you have a requirement for on site

calibration then please contact us for a quotation.

On-Site Servicing of DomesticFlue Gas Analysers

We can offer on site service and calibration

of Testo 325, 327 and 330 Flue Gas

Analysers. Please call for further details

or a competitive quotation.

On-Site Services

Pick up and Return Service

Testo offer a pick up and return service for all our other instruments. To find out more about how

this service works simply call our Service Team on 01420 566 845.

Saveris: wireless temperature andhumidity data logging system


• On-site survey to confirm system requirements

• Installation and set up• Training, if required• System calibration to either UKAS or ISO certification. Calibration can be carried out in our laboratory or on-site to avoid system downtime.

Testo Thermator - Multifunction Temperature Calibrator

The Testo Thermator can be used as a stationary or portable calibrator with an operating

range of -20 to +150 °C. The Thermator can calibrate a range of thermal instruments using

liquid bath, dry block, infrared or surface options.

Calibration Equipment

liquid bath dry block infrared surfaceTemperature range -20 °C to +150 °C

Accuracy ± 0.1k ± 0.3k ± 1k ± 1.5k, 100 °C,± 1.5k <100 °C

Stability ± 0.05k ± 0.05k ± 0.3k ± 0.2k

Technical Data

Part Number 0519 0901

Price £6,800.00

Thermator Kit

Includes one control sensor, 3 inserts

(IR, surface and dry block) with 7 standard

bore holes, an insert basket, draining pump,

silicone oil, magnetic lifter and magnet stirrer.

The Testo Thermator offers the following

benefits:

� Simple and fast conversion using differentinserts

� Regulation by internal or external sensor

� High stability and quick regulation of setindex values

� Up to 4 programmable set values

� Re-calibration at minimal costs




ISO Temperature: Air, penetration, IR, immersionDescription Part Number Price £ISO Calibration. 1 point: -18 °C or +60 °C or +120 °C Various - please call 35.00

ISO Calibration. 2 point: -18 °C, 0 °C or 0 °C, +60 °C Various - please call 47.00

ISO Calibration. 3 point: -18 °C, 0 °C, +60 °C or 0 °C, +50 °C, +100 °C Various - please call 59.00

ISO Temperature: Surface probesDescription Part Number Price £ISO Surface Temperature Calibration: +50 °C, +100 °C, +150 °C 300520 0080 71.50

ISO Infrared & Surface Calibration: +50 °C, +100 °C, +150 °C 300520 0038 95.00

UKAS Temperature: Immersion & penetrationDescription Part Number Price £UKAS Calibration. 3 point: -18 °C, 0 °C, +60 °C or 0 °C, +50 °C, +100 °C Various - please call 108.50

OthersDescription Part Number Price £ISO Pressure. Digital indicator 5 point rising/falling 300520 0018 60.00

ISO Light Calibration. 5 points 300520 0110 60.00

ISO rpm Calibration. 5 points 300520 0100 35.00

Sound level meters 300520 0104 72.50

Sound level calibrators 300520 0106 35.00

UKAS HumidityDescription Part Number Price £UKAS Humidity Calibration (11.3/45.3/75.3 %rh at 25 °C) 300520 0202 165.00

ISO HumidityDescription Part Number Price £ISO Humidity Calibration (11.3/45.3/75.3 %rh at 25 °C) 300520 0078 99.00

ISO Air velocity (0.4 to 32.5 m/s)Description Part Number Price £ISO Air Velocity (5 points across range) Various - please call 75.00

Below is a selection of the calibration services we offer. If you have any other requirements,

require further information or would like a no obligation quotation please call 01420 544 433

or email [email protected].

Terms and conditions apply. Please contact us for further information. Prices valid until 31st December 2011. Whilst every care has been taken toensure that the information included in this document was accurate at the time of printing, we reserve the right to change prices at any time.

testo Ltd.Newman Lane, Alton, Hants, GU34 2QJ

Tel: 01420 566 845 Fax: 01420 544 419Email: [email protected] Internet: www.testo.co.uk

Ordering Information

calibration services brochure 2011

Business