CAESAR SHORT CUT KEYS 12/11/2013 12:57 PM

F1/? HELPF2 ANCHORS SHIFT+F2 ANCHORS WITH NODE F3 DISPLACEMENTS F4 HANGERS SHIFT+F4 HANGERS WITH NODE F6 PLOT RANGE* F7 RESTRAINTS SHIFT+F7 RESTRAINTS WITH NODES F8 VISIBLE WALL THICKNESS SHIFT+F8 ALL WALL THICKNESS F9 REFRESH F11 VIEW ALONG Z-AXIS 1 T1 2 T2 3 T3 ETC. 0 MOVE ALONG X-AXIS -/_ ZOOM OUT =/+ ZOOM IN UP ROTATE ABOUT HORIZANTAL AXIS-CLOCKWISE DOWN ROTATE ABOUT HORIZANTAL AXIS-ANTICLOCKWISE LEFT ROTATE ABOUT VERTICAL AXIS-CLOCKWISE RIGHT/' ROTATE ABOUT VERTICAL AXIS-ANTICLOCKWISE INSERT ROTATE ABOUT Z-AXIS CLOCKWISE DELETE/. ROTATE ABOUT Z-AXIS ANTICLOCKWISE HOME MOVE LEFT END/" MOVE RIGHT PAGE UP MOVE UP PAGE DOWN MOVE DOWN BACKSPACE/ENTER REFRESH

1 lb =0.454 Kg1 Ton = 1000 Kg1 Atm = 1.013 bar1 bar = 10197 Kg/m21 N = 1E5 Dyne1 Kgf = 9.8 N1 lbf = 4.45 N1 Litre = 0.001 m31 Kg/m2 = 9.8 Pa1 lb/in2 = 703.09 Kg/m2C = T-273 = F-325 5 91 rad = 180 Deg = 57.3 Deg

pi1 lb/f3 = 16 Kg/m3g = 9.81 m/s2 = 32.2 f/s2 = 386.2 in/s2Allow Stress (CS) for bending at amb. = 140 N/mm2Allow Stress (CS) for shear at amb. = 140 N/mm2

BACKSPACE/ENTER REFRESH Q QUIT W WALL THICKNESS E EXPANSION JOINTS AND RIGIDS T TEES SHIFT+T TEES WITH NODE NUMBERS Y VIEW ALONG Y AXIS U PLOT RANGE I INSULATION P COMPASS A/M MATERIAL D DIAMETERS G ROTATE ABOUT HORIZANTAL AXIS-CLOCKWISE (RUNNING) L LENGTHS | NOZZLE Z VIEW ALONG Z AXIS X VIEW ALONG X AXIS C CORROSION ALLOWANCE V VOLUME MODE B ELBOW N VISIBLE NODES SHIFT+N ALL NODES

d:\office\stress\caesar shortcut keys.xls 1 of 1