cad evaluation
TRANSCRIPT
-
7/27/2019 CAD EVALUATION
1/10
Apparel CAD Evaluation format
APPENDIX VII
Section aQUESTIONNARE
SEGMENT I (ORGANIZATION)
i. Which Cad system is being used in your organization? Lectra version 3 & 5
ii. When was the CAD system being implemented in your organization?
Before 5 years (12 years back)
3-5 years
1-3 years
less than 1 year
iii. How many times has the organization upgraded the CAD software or installed /
changed to a newone ?
Once
Two - five times
Almost every year
Whenever required
SEGMENT II (PURPOSE)
i. Is CAD easier than traditional methods?
(a) Users point of view: Yes(b) Your point of view: Yes
ii. For what purpose/s is the CAD system being used? (Can be more than one)
Only for pattern making
For digitizing the patterns provided by buyers
Marker planning
Alterations in patterns
Grading Others for calculating fabric consumption as well
iii. Does CAD result in greater productivity, is it more lucrative?
(a) Yes(b) If no, why? Yes because we can plan better marker efficiency therefore fabric
wastage can be kept to minimum and also through grading we can directly
Copyright DFT 2007
NIFT/DFT/Internship
1
-
7/27/2019 CAD EVALUATION
2/10
make different size, which saves a lot of
time.________________________________________________________
SEGMENT III (GENERAL)
i. Do you feel that CAD is affordable? Yes Depends upon the magnitude of company.
No
Cant say
ii. Are traditional skills required to work on CAD?
Please Comment:No, only knowledge about software is required
iii. Are experienced pattern makers (who manually developed patterns and markers)
easily accepting the extensive use of CAD / CAM? Yes
No
Sometimes
iv. Is the combination of an individual readily available who is an expert in CAD / CAMand pattern making?
Yes, always
No, sometimes
Rarely
SEGMENT- IV (TRAINING)
i. Was any training imparted to the operator when the new soft-ware was installed?
Yes
No
If yes, then for how many days?
- Less than 7 days- 7-15 days
- More than 15 days
ii. Are you satisfied with the training given?
Yes
No
If no, please specify the reason?
- Training should be of longer duration
- Language problem- Any other __________________________
Copyright DFT 2007
NIFT/DFT/Internship
2
-
7/27/2019 CAD EVALUATION
3/10
iii. Do you think that training is only required when a new software is installed or do you
recommend an in-house training otherwise as-well?
Training every year or 6-months
Only when a software is installed
iv. Do you think that the person working on CAD / CAM should be well versed inPattern and Marker development or should he have fair knowledge about textile and
styling as-well?
Please Comment: must have knowledge of pattern and marker development only
SEGMENT V (PEOPLE INVOLVED)
i. How many people are working in the pattern development and marker making
department?Please specify, (approx.) - 8
ii. Has the number changed (increased / decreased) with the usage of CAD?
Reduced
Are the same
Cant say
iii. What is the age of person working on CAD?
20-25 yrs.
25-35 yrs 28,34,40( three persons are working)
Above 35 yrs.
iv. Does he have any prior work experience on CAD? Yes
No
If yes, then how many years?
- 1 yr.
- 1-2 yrs
- More than 2 yrs.
Copyright DFT 2007
NIFT/DFT/Internship
3
-
7/27/2019 CAD EVALUATION
4/10
Section b
The following factors have been identified to have an influence on
adoption of CAD / CAM.(Kindly select the most appropriate option)
Copyright DFT 2007
NIFT/DFT/Internship
4
-
7/27/2019 CAD EVALUATION
5/10
Section c
Copyright DFT 2007
NIFT/DFT/Internship
Factors influencing
adoption of IT
Strongly
positive
Moderately
positive
Indifferent Moderately
negative
Strongly
negative
Cant
sayHigh Price
Reduces dependence on
people
Failed installation in other
organization
Collaborative working
between various employees,
supplier and buyer is easier
Ability of supplier to trainthe users in our organization
Saves fabric
The supplier does not have
an office in the location
where my organization is
situated
Improves first pass quality
product
Reduces throughput time for
product assemble
Requirement of constanttraining
Ready availability of literate
professionals
Constant up gradation of
system required
Others please
specify-----------
5
-
7/27/2019 CAD EVALUATION
6/10
This sheet will help you decide which system is best for your pattern
development department and organization. ( Even if you have one. )Note: Simple instructions to fill in the form.
Mention the various CAD / CAM systems you are aware of in (*) columns
In the row below, mention how each of these systems came to your knowledge,
whether through your institute, buyers, pattern maker, the respective company,fairs and exhibitions or some journals etc.
Mention the CAD system under the evaluating points of 1-7.evaluate by giving
score of 1-7 where 1 stands for best and 7 for the least.
Same number maybe given for more than one company if the features are felt to
be the same. The company scoring the minimum score as per your requirementsshould be your choice for buying the CAD system.
In the last column, kindly mention the basis of your evaluating criteria. For ex., if
you have give 1 to a particular system and 3 to the other, kindly mention who /why you made the decision.
Criteria LECTRA REACHPIECE * * * * * SourceHow you found outabout them
Ownorganization
Past
organization(reunion
clothing company)Communications-
digitizers and file
import
1 3
Piece geometry
identifications(points,
lines, notches,orientations lines,
piece rotation line for
marker making)
1 3
Pattern design
functions-measurement
capabilities
1 3
Pattern design
functions-darts,
pleats, trace, cut,
combine, shrink,stretch, flip, rotate
patterns.
2 3
Pattern design
functions- seam
2allowancedefinition, corners,
1 2
Copyright DFT 2007
NIFT/DFT/Internship
6
-
7/27/2019 CAD EVALUATION
7/10
corner insert
Removing and
adding of patterns
from present files,printing and redo and
undo functions &keyboard and mousehot keys- shortcut
keys
1 3
Pattern grading
functions
1 3
Maker makingfunctions
1 3
Automatic markermaking functions
1 -
Software platforms 1 2
Outputs andconsumables
availability
3 3
Manuals 2 2
Communications
access with respect
internet compatibility
2 3
Warranty and after
sales service
1 2
CAM and CAS
interface
- -
Customizing features - -Cost implications 1 2
Interface capabilities
with other designsoftware
2 3
Plotting facility 2 2
TOTAL
Any remarks:
_______________________________________________________________________
______________________________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________________________
_______________________________________________________________________
______________________________________________________________
Copyright DFT 2007
NIFT/DFT/Internship
7
-
7/27/2019 CAD EVALUATION
8/10
Section d
Analyzing usage of various functions in the CAD / CAM systems.
Note: Kindly tick mark in the relevant column and pen down any remark / commentrelated to the point in the last column.
S.No. Criteria Always Sometimes/
Occasionally
Rarely Never Additional
Comment
1. Digitization
2. On screen patternconstruction
3. Notches option 4. Dart
manipulation
5. Grading tools 6. Size
correspondence
7. Specification
sheet
development
8. Piece assembly 9. Variant tools 10. Marker planning
11. Plotting
12. Piece rotation
13. Measurementcapabilities
14. Pattern Designfunctions- Darts,
pleats, trace, cut,
combine, shrink,stretch, flip,
Rotate pattern.
15. Removing andadding patterns
Copyright DFT 2007
NIFT/DFT/Internship
8
-
7/27/2019 CAD EVALUATION
9/10
Section e
Technical specificationsNote: Simple instructions to fill in the form.
Mention the various CAD / CAM systems you are aware of in (*) columns
Mention the CAD system under the evaluating points of 1-7, evaluate by giving
score of 1-7 where 1 stands for simplest and 7 for the complicated.
Then compare the following system on the basis of the criteria mentioned with
respect to the manual pattern making methods also (Mention the rating in theappropriate column.)
If a particular facility is not available in manual pattern making / CAD, mention
NIL.
In the remarks column, kindly mention the basis of your evaluating criteria (If
possible). For ex., if you have given 1 to a particular system and 3 to manual
pattern development, kindly mention why you made the decision.
Criteria Lectra Reachpiec
e
* Manual
Pattern
Making
Remarks
Communications-
digitizers and file
import
1 2 -
Pattern design
functions-measurement
capabilities
1 2 2
Pattern design
functions-darts, pleats,
trace, cut, combine,
shrink, stretch, flipand rotate patterns.
2 3 3
Pattern designfunctions- seam
allowance definition,
corners, corner insert
1 2 1
Removing and adding
of patterns from
present files, printingand redo and undo
functions & keyboard
and mouse hot keys-
1 2 3
Copyright DFT 2007
NIFT/DFT/Internship
9
-
7/27/2019 CAD EVALUATION
10/10
shortcut keys / Pattern
alterations
Pattern grading
functions
1 1 1
Changes in Maker
plans
1 1 2
Automatic marker
making functions
1 - -
Software platforms 2 2 -
Outputs andconsumables
availability
3 3 1
Manuals / Books 2 2 -
Communicationsaccess with respect
internet compatibility
1 2 -
Warranty and aftersales service
1 1 -
CAM - - -
Customizing features - - 1
Cost implications 1 1 1
Interface capabilitieswith other design
software
2 3 -
Plotting facility 2 2 -
Marker Planning
Options (Piece
rotation, Ply andedges, direction of
pieces, quantity ofpieces and piece
adjustment command,
marker efficiency,fabric width, etc.)
1 2 4
TOTAL
Any remarks:
Dxf format is used for all softwares.
Copyright DFT 2007
NIFT/DFT/Internship
10