Installing the power cable in a Cablemaster withoutdisconnecting the limit switch assembly

TECHNICAL BULLETINGLENDINNING

STEP 2: REMOVE HEX HEAD SCREWS AND ROLLERRemove hex head screws which hold the Roller in place. Remove Roller and pin.

Cable Installation through Limit Switch Cable Installation through Limit Switch AssemblyAssemblyMARINE PRODUCTS, INC.

STEP 1: REMOVE OFFSET BRACKETRemove both bolts which fasten the Offset Bracket to the Limit Switch Assembly.

STEP 3: INSERT CABLE AND REASSEMBLE Insert cable through open gap and reassemble Limit Switch. Attach Offset Bracket.

GLENDINNINGMARINE PRODUCTS, INC.

(843) 399-6146(843) 399-5005

www.glendinningprods.com

740 Century CircleConway, SC 29526