cable accessories - voltex• cable gland manufactured from high quality brass (nickel plated). •...
TRANSCRIPT
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 95VOLTEX CATALOGUE
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.96 VOLTEX CATALOGUE
UNIVERSAL GLAND AND CABLE RATING CHARTCABLE ACCESSORIES
Approximate dimensions and nettmass per 100m Sustained current ratings Volt Drop To Suit Clamp
to Suit
Rated area Number of cores
Max overalldiameter Nett mass In air Laid Direct In Ducts Per
m/amp Size(mm²) (mm) (kg) (amp) (amp) (amp) (mV)
1.5 2 14.0 39 23 29 23 29 0 E26
3 14.5 44 20 24 20 25 0 E27
4 15.5 49 20 24 20 25 0 E27
2.5 2 15 45 31 37 31 18 0 E27
3 15.5 50 26 32 26 15 0 E28
4 16.5 58 26 32 26 15 0-1 E28
4 2 17 59 41 50 41 11 0-1 E28
3 17.5 66 36 42 34 9.5 1 E28
4 18.5 77 36 42 34 9.5 1 E28
6 2 17.5 67 53 62 51 7.3 1 E28
3 18.5 78 45 53 43 6.4 1 E28
4 20.0 91 45 53 43 6.4 2 E30
10 2 21 89 72 83 68 4.4 2 E30
3 22 102 62 70 58 3.8 2 E30
4 23.5 120 62 70 58 3.8 2 E30
16 2 18.5 93 96 107 88 2.8 2 E30
3 20.5 114 82 91 75 2.4 2 E30
4 23 140 82 91 75 2.4 3 E32
25 2 21.5 120 128 142 116 1.75 2-3 E30
3 24.5 160 109 119 96 1.50 3 E32
4 27.5 200 109 119 96 1.50 3 E32
35 2 23 142 156 171 139 1.25 3 E30
3 27.5 200 133 143 116 1.10 3 E32
4 29.5 247 133 143 116 1.10 3-4 E34
50 3 29.5 250 162 169 138 0.81 4 E34
4 34 338 162 169 138 0.81 4 E34
70 3 33 344 205 210 171 0.57 4 E34
4 39.5 470 205 210 171 0.57 4-5 E35
95 3 38.5 482 252 251 205 0.43 4-5 E36
4 45 612 252 251 205 0.43 5 E36
120 3 42.5 590 291 285 234 0.35 5 E36
4 47 752 291 285 234 0.34 5 E38
150 3 45 705 334 320 263 0.29 5-6 E38
4 53 960 334 320 263 0.29 6 E40
185 3 52 910 383 361 298 0.25 6 E40
4 58 1150 383 361 298 0.25 6 E42
Note:Cable Construction: Plain annealed stranded copper conductors, PVC insulated, PVC Bedded, Galvanised steel wire armoured, PVC Sheathed (600/1000V). SABS 1507/1000
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 97VOLTEX CATALOGUE
GLANDS, BOXES AND SHROUDS
BWCaptive Cone Gland TM
(For PVC SWA PVC Cable)
Size Model Product Code0-20s 0503-0 H178
1-20 050301 H179
2-25 050302 H181
3-32 050303 H182
4-40 050304 H183
5-50 050305 H184
6-63 050306 H185
7-75 050307 H186
8-80 050308 H187
*9-90 050309 H188
*10-100 050310 H180
*11-110 050311 H4235
*12-120 050312 H4236
Features and Benefits
• For indoor and outdoor use.• Two part handling, no loose parts.• Freely rotating captive cone, providing an armour clamp and earth bond without
twisting the armouring.• Precision manufactured from high quality brass (nickel plated) and available in
aluminium on request.• Complete with high quality brass locknuts.
Neoprene Shroud
Size Model Product Code
0 1521-0 H416
1 152101 H417
2 152102 H418
3 152103 H419
4 152104 H420
5 152105 H421
6 152106 H422
7 152107 H423
PVC Shroud
Size Model Product Code
0 1522-0 H428
1 152201 H429
2 152202 H430
3 152203 H431
4 152204 H432
5 152205 H433
6 152206 H434
7 152207 H435
8 152208 H436
9 152209 H437
10 152210 H438
Note: • Longer lead times apply to items marked with a (*) in the sizes column and need to be confirmed at the time the order is placed.
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.98 VOLTEX CATALOGUE
GLANDS, BOXES AND SHROUDS
A2Compression Gland
(For Unarmoured Cable)
Size Model Product Code00-20ss 053500 H198
0-20s 0535-0 H197
1-20 053501 H199
2-25 053502 H200
3-32 053503 H201
4-40 053504 H202
5-50 053505 H203
6-63 053506 H204
7-75 053507 H205
8-80 053508 H206
9-90 053509 H207
*10-100 053510 H4237
*11-110 053511 H4238
Features and Benefits
• For indoor and outdoor use.• Seals the cable sheath to IP66/67/68.• Specially formulated elastomeric seals.• Wide sealing range.• Precision manufactured from high quality brass (nickel plated) available in
aluminium or stainless steel on request.• Complete with high quality brass (nickel plated) locknuts and IP gasket or high
temperature sealing gasket or o-ring.
IPlus TM
Corrosion Guard TM
(For PVC SWA PVC Cable)
Size Model Product Code00-16ss 054600-16-IP H4239
00-20ss 054600-IP H4240
0-20s 0546-0-IP H2094
1-20 054601-IP H2095
2-25 054602-IP H2096
3-32 054603-IP H2097
4-40 054604-IP H2098
5-50 054605-IP H2099
6-63 054606-IP H4241
7-75 054607-IP H4242
Features and Benefits
• For highly corrosive and wet locations.• Cable gland manufactured from high quality brass (nickel plated). • The screw-on Corrosion Guard™ is manufactured from non-metallic material to
protect the steel wire armour and metal arts of the gland from corrosion.• Provides sealing on inner and outer sheath of the cable sealing to IP66/68.• Corrosion guard screws onto the gland body and seals over the outer sheath of the
cable giving an IP66/67/68 seal.• Complete with high quality brass locknuts and polypropylene gasket.
Posi-Flex TM
Compression Gland TM
(For Unarmoured Cable)
Size Model Product Code00-20ss 053800 H378
0-20s 0538-0 H377
1-20 053801 H379
2-25 053802 H380
3-32 053803 H381
4-40 053804 H382
Features and Benefits
• For use in highly corrosive areas.• All brass parts encapsulated in a non-corrosive body.• Wide sealing range.• Complete with a fitted elastromeric seal to seal cable IP66/67/68.• Supplied with a brass locknut and polypropylene gasket.
Note: • Longer lead times apply to items marked with a (*) in the sizes column and need to be confirmed at the time the order is placed.
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 99VOLTEX CATALOGUE
GLANDS, BOXES AND SHROUDS
D1WCaptive Component Gland TM
(For PVC SWA PVC Cable)
Size Model Product Code00-16ss 052000-16 H4244
00-20ss 052000 H4245
0-20s 0520-0 H4246
1-20 052001 H3228
2-25 052002 H3229
3-32 052003 H3230
4-40 052004 H3231
5-50 052005 H3232
6-63 052006 H3233
7-75 052007 H4247
8-80 052008 H4248
9-90 052009 H4249
Features and Benefits
• For indoor and outdoor use.• Two piece handling, no loose parts.• Freely rotating captive cone and cone ring, providing an armour clamp and earth
bond without twisting the armour wire.• Factory fitted captive elastromeric inner seal for ingress protection IP66/67/68.• Seals on the inner sheath of the cable.• Precision manufactured from high quality brass (nickel plated).• Complete with polypropelyne sealing gasket.
BarrierTex TM ABarrier Gland
(For use with Unarmoured Cable)
Size Model Product Code00-20ss 052500 H4258
0-20s 0525-0 H4259
1-20 052501 H4260
2-25 052502 H4261
3-32 052503 H4262
4-40 052504 H4263
5-50 052505 H4264
6-63 052506 H4265
Features and Benefits
• Provides a barrier seal between the individual cores of the cables.• Inspectable compound chamber and flameproof chamber.• Prevents explosive gasses propagating through a cable.• prevents gas and moisture migrating through a cable.• Precision manufactured from high quality brass (electroless nickel plated) and
stainless steel.
BarrierTex TM FBarrier Gland
(For Unarmoured Cable)
Size Model Product Code00-20ss 052600 H4243
0-20s 0526-0 H2539
1-20 052601 H4250
2-25 052602 H4251
3-32 052603 H4252
4-40 052604 H4253
5s-50s 052655 H4254
5-50 052605 H4255
6s-63s 052666 H4256
6-63 052606 H4257
Features and Benefits
• Provides a barrier seal between the individual cores of the cables.• Inspectable compound chamber and flameproof chamber.• Prevents explosive gasses propagating through a cable.• prevents gas and moisture migrating through a cable.• Precision manufactured from high quality brass (electroless nickel plated) and
stainless steel.
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.100 VOLTEX CATALOGUE
GLANDS, BOXES AND SHROUDS
FLPCaptive Component Gland
(For MAC - Multi Armour Cable)
Model Gland SizeReference
Entry Thread Cable Details (Dia)
Max Length
Hexagonal Details (Max)
Product CodeMetic-NPT
'C' 'D' Min-Max 'A'
Max 'B' 'E' 'Flats' 'Crns'
0521 - 00 00 - 20ss 052100-16 15 3.0 - 8.0 16.0 46 25 28 H10208
0521 - 0 0 - 20s 052100 15 8.0 - 11.5 16.0 46 25 28 H217
052101 1 - 20 0521-0 15 11.5 - 14.0 19.0 48 30 34 H218
052102 2 - 25 052101 15 14.0 - 20.5 26.5 60 42 48 H219
052103 3 - 32 052102 15 20.5 - 26.5 33.0 76 47 54 H220
052104 4 - 40 052103 20 26.5 - 32.5 40.5 84 60 69 H221
052155 5 - 50s 052104 20 32.5 - 38.0 46.0 90 74 85 H10209
052105 5 - 50 052155 20 38.0 - 44.5 52.0 90 74 85 H222
052165 6 - 63s 052105 20 44.5 - 50.0 60.0 96 85 98 H10210
052106 6 - 63 052165 20 50.0 - 56.0 67.0 96 85 98 H223
Features and Benefits
• Two part handling, freely rotating captive cone for earth continuity and armour clamping.• Factory fitted with a specially formulated elastromeric seal provides built-in safety.• No loose parts that can get lost.• Manufactured from high quality brass, nickel plated and stainless steel.• Complete with an orange thread cap/safety gauge for correct gland selection.
FLP HoseCompression Gland
Model Gland SizeReference
Entry Thread Cable Details (Dia)
To Suit Hoze Size
Hexagonal Details (Max)
Product CodeMetic-NPT
'C' 'D' Min-Max 'A''B'
'Flats' 'Crns'(mm)
0527-0 0-20s M20-½ 15 8.0 - 11.5 ½ - 13 25 28 H241
052701 1-20 M20-½/¾ 15 11.5 - 14.0 ¾ - 19 30 34 H3094
052702 2-25 M25-¾/1 15 14.0 - 20.5 1 - 25 42 48 H242
052703 3-32s M32-1/1¼ 15 20.0 - 26.5 1¼ - 32 47 54 H2544
052704 4-40 M40-1¼/1½ 20 26.5 - 32.5 1¼ - 38 60 69 H2545
Features and Benefits
• Fitted complete with a specially formulated elastromeric captive seal for built-in safety.• Complete with a spigot to attache as hose for cable protection.• Manufactured from high quality brass, nickel plated and stainless steel.• Complete with an orange thread cap/safety gauge for correct gland selection.
FLP TRCompression Gland
Model Gland SizeReference
Entry Thread Cable Details Max. Length
Hexagonal Details (Max)
Product CodeMetic-NPT
'C' 'D' Min-Max 'A' 'E' 'Flats' 'Crns'
042400 00-20ss M20 15 3.5 - 8.5 57 25 28 H244
0524-0 0-20s M20 15 8.0 - 11.5 57 25 28 H243
052401 1-20 M20 15 11.5 - 14.0 59 30 34 H245
052402 2-25 M25 15 14.0 - 20.5 71 42 48 H246
052403 3-32 M32 15 20.5 - 26.5 87 47 54 H247
052404 4-40 M40 20 26.5 - 32.5 96 60 69 H248
052455 5s-50s M50 20 32.5 - 38.0 112 74 85 H10219
052405 5-50 M50 20 38.0 - 44.5 112 74 85 H249
052465 6s-63s M63 20 44.5 - 50.0 124 85 98 H10220
052406 6-63 M63 20 50.0 - 56.0 124 85 98 H250
Features and Benefits
• Fitted complete with a specially formulated elastromeric captive seal for built-in safety.• No loose parts that can get lost.• Provided with an extra hard gripper seal to grip cable.• Manufactured from high quality brass, nickel plated and stainless steel.• Complete with an orange thread cap/safety gauge for correct gland selection.
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 101VOLTEX CATALOGUE
GLANDS, BOXES AND SHROUDS
D1EXCaptive Component Gland TM
(For use with Unarmoured Cable)
Size Model Product Code00-16ss 051900-16 H4266
00-20ss 051900 H4267
0-20s 0519-0 H208
1-20 051901 H3227
2-25 051902 H3220
3-32 051903 H2720
4-40 051904 H2541
5-50 051905 H2542
6-63 051906 H4268
7-75 051907 H4269
8-80 051908 H4270
9-90 051909 H4271
10-100 051910 H4272
Features and Benefits
• For indoor and hazardous areas.• Two part handling, no loose parts, freely rotating captice cone ring, providing
armour clamp and earth bond without twisting the armour wires.• Factory fitted with a specially formulated elastrometric seal for built-in safety, seals
on the inner sheath of the cable.• Precision manufactured from high quality brass (electrolesss nickel plated).• Complete with polypropylene sealing gasket and an end cap/safety guage for
correct gland selection.
A2EXCompression Gland TM
(For Unarmoured Cable)
Size Model Product Code00-16ss 053600-16 H4273
00-20ss 053600 H172
0-20s 0536-0 H171
1-20 053601 H173
2-25 053602 H174
3-32 053603 H175
4-40 053604 H176
5-50 053605 H177
6-63 053606 H3136
7-75 053607 H3092
Features and Benefits
• For indoor, outdoor and hazardous areas with unfilled hygroscopic multicore cables.• Prevents gas and moisture transmitting down cable.• Prevents explosive gasses transmitting down cables.• Precision manufactured from high quality brass (electroless nickel plated).
Ex Corrosion Guard TM
Cable Gland(For use with Unarmoured Cable)
Size Model Product Code00-16ss 054700-16 H4274
00-20ss 054700 H4275
0-20s 0547-0 H209
1-20 054701 H210
2-25 054702 H211
3-32 054703 H212
4-40 054704 H213
5-50 054705 H214
6-63 054706 H215
7-75 054707 H216
8-80 054708 H4276
9-90 054709 H4277
10-100 054710 H4278
Features and Benefits
• Provides a barrier seal between the individual cores of the cables.• Inspectable compound chamber.• Prevents explosive gasses propagating through a cable.• prevents gas and moisture migrating through a cable.• Precision manufactured from high quality brass (electroless nickel plated) with
screw on corrosion guard™.
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.102 VOLTEX CATALOGUE
GLANDS, BOXES AND SHROUDS
Posi Grip TM
Compression Gland(For Unarmoured Cable)
Size Model Product Code00-20ss 054500 H225
0-20s 0545-0 H224
1-20 054501 H226
2-25 054502 H227
3-32 054503 H228
4-40 054504 H229
5-50 054505 H230
6-63 054506 H231
7-75 054507 H232
Features and Benefits
• For use in highly corrosive and hazardous areas.• Brass parts are encapsulated in a non-corrosive body• Complete with a hard gripper seal, deluge proof O-ring and elastomeric inner seal
for complete ingress protection IP68.• Complete with a polypropylene sealing gasket and an end cap/safety gauge for
correct gland selection.
Handi-Fit Box4-Way / Y-Box
(For PVC SWA PVC Cable)
Size Model Product Code
4-Way0 0650-0 H58
1 065001 H59
2 065002 H60
3 065003 H61
Y-Box0 0651-0 H4279
1 065101 H55
2 065102 H56
3 065103 H57
Utility Box / Foundation Box(General Purpose Junction Box)
Size Model Product Code
Utility Box20mm 102101 H63
25mm 102102 H64
Foundation Box20mm 102401 H2821
25mm 102402 H3241
Roof Box
Size Model Product Code
20mm 102700 H2252
Empty Posi Fit, Box4-Way / Y-Box
(Hazardous Area Junction Box)
Size Model Product Code
4-Way0 1003-0 H46
1 100301 H49
2 100302 H53
3 100303 H54
Y-Box0 1009-0 H1425
1 100901 H2732
2 100902 H2483
3 100903 H2484
Features and Benefits
• Can be wired to your configuration for full creditation and certification
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 103VOLTEX CATALOGUE
CABLE GLANDS
Type Benefits Sizes Features Product code
• Easy to install (loose cone)• Protects armour wire
0
• Loose cone.• High quality nickel plating.• To provide clamping of the armour
wire for earth continuity and mechanical retention of the cable.
• May be used both indoors and outdoors.
H2734
1 H2735
2 H2736
3 H2737
4 H2738
5 H2739
6 H2740
7 H2741
Type Benefits Sizes Features Product code
• Easy to install (loose cone)• Displacement seal concept
ensures effective seal to the outer sheath
00
• Novel seal design accomodates wide cable range.
• High quality nickel plating.• May be used both indoors and
outdoors.
H2750
0 H2751
1 H2752
2 H2753
3 H2754
4 H2755
5 H2756
6 H2757
7 H2758
A2 Compression Gland
BWL Loose Cone Glands
Type Benefits Sizes Features Product codew
• Easy to install (rotary cone)
• Protects armour wire
0
• Rotary cone.• High quality nickel plating. • To provide clamping of the
armour wire for earth continuity and mechanical retention of the cable.
• May be used both indoors and outdoors.
H2742
1 H2743
2 H2744
3 H2745
4 H2746
5 H2747
6 H2748
7 H2749
BWR Rotary Cone Glands
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.104 VOLTEX CATALOGUE
GLAND ACCESSORISShrouds
Earth Tags
TypePVC Shroud Rubber Shroud
Size Product Code Size Product Code0 H2763 0 H10225
1 H2764 1 H2929
2 H2765 2 H2930
3 H2766 3 H2931
4 H2767 4 H2932
5 H2768 5 H2933
6 H2769 6 H10226
7 H2770 7 H10227
TypeSlip-on Earth Tag
Model Slip-SizeØ A Ø B
Product Code(mm) (mm)
ET0 0 20 6.8 H10228
ET1 1 20 6.8 H10229
ET2 2 25 6.8 H10230
ET3 3 32 6.8 H10231
ET4 4 40 6.8 H10232
ET5 5 50 10.5 H10233
ET6 6 63 10.5 H10234
ET7 7 75 10.5 H10235
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 105VOLTEX CATALOGUE
UTILITY JUNCTION BOX
TypeTotal Width
Outside Hight
Inside Height
Gland Size
Inside Width Fixing Hole
Product Code
A B C D E F G H
109 75 57 M20 94 122 96 6.9 H1451
135 85.5 69.5 M25 124 150 106 7 H10222
109 75 57 M20 94 122 96 6.9 H10223
135 85.5 59.5 M25 124 150 106 7 H10224
Dimensions Features and Benefits
•
• Manufacturedfrom high impact, corrosion and UVesistant material• For use in general and industrial installations• SABS 1222 IP66/68. (Dust and water tight)• Allows for 1, 2, 3 and 4 way connections• Blanking plugs, O-rings and lock nuts provided• No need for drilling and tapping• Internal earth plate provided (no exposed metal parts)• Din rail mounting studs provided• UJB1/2T - Special locking key to prevent unauthorised entry (optional)• UBJ1/2C - UBJ1 with clear lid
Size Colour Product Code
Gland 00/0/1 UNI: 3-in-1 White H960
Gland 00/0/1 UNI: 3-in-1 Black H961
Gland 00/0/1 UNI: 3-in-1 Push in H1116
Gland PVC 0 White - Screw H263
Gland PVC 1 White - Screw H265
Gland PVC 2 White H3237
your electrical connection
GLANDS
PVC Glands
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.106 VOLTEX CATALOGUE
Adaptors and Reducers
Ex Adaptors and Reducers
REDUCERS AND ADAPTORS
Metric Reducers
Type SizeThread
Product CodeM F
RM025M020S M25 M20 H390
RM032M020S M32 M20 H393
RM032M025S M32 M25 H1773
RM040M020S M40 M20 H396
RM040M025S M40 M25 H398
RM040M032S M40 M32 H400
RM050M020S M50 M20 H402
RM050M025S M50 M25 H404
RM050M032S M50 M32 H406
RM050M040S M50 M40 H408
RM063M032S M63 M32 H410
RM063M040S M63 M40 H412
RM063M050S M63 M50 H414
Metric Adaptors
Type SizeThread
Product CodeM F
AM020M025S M20 M25 H10168
AM025M032S M25 M32 H2477
AM032M040S M32 M40 H10169
AM040M050S M40 M50 H10170
AM050M063S M50 M63 H10171
AM063M075S M63 M75 H10172
Metric Reducers
Type SizeThread
Product CodeM F
RM025M020E M25 M20 H391
RM032M020E M32 M20 H394
RM032M025E M32 M25 H395
RM040M020E M40 M20 H397
RM040M025E M40 M25 H399
RM040M032E M40 M32 H401
RM050M020E M50 M20 H403
RM050M025E M50 M25 H405
RM050M032E M50 M32 H407
RM050M040E M50 M40 H409
RM063M032E M63 M32 H411
RM063M040E M63 M40 H413
RM063M050E M63 M50 H415
Metric Adaptors
Type SizeThread
Product CodeM F
AM020M025E M20 M25 H37
AM025M032E M25 M32 H2475
AM032M040E M32 M40 H10173
AM040M050E M40 M50 H2166
AM050M063E M50 M63 H10174
AM063M075E M63 M75 H10175
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 107VOLTEX CATALOGUE
JOINT KITS
Scotchcast Resin Type Joints
In-Line Splices
TypeMin. Cable O.D Max. Cable O.D Cable Conductor Size
Product Code(mm) (mm) (mm²)
Scotchcast 82 Splicing Kits
Scotchcast 82-A1 7 16 2,5 -4 H277
Scotchcast 82-A2 14 28 6-16 H278
Scotchcast 82-A3 17 40 25-35 H279
Scotchcast 91 Splicing Kits
Scotchcast 91-A1 8 28 4-10 H280
Scotchcast 91-A2 14 32 16-25 H281
Scotchcast 91-A3 23 39 35-50 H282
Scotchcast 91-A4 28 51 70 H283
Scotchcast 91-A4.5 30 55 95 H715
Scotchcast 91-A5 45 70 120-150 H284
Scotchcast 91-A6 48 86 185-240 H285
Electrical Insulating Resins
Type Size Product Code
Scotchcast Electrical Insulating Resins
4SA Epoxy Resin in Unipak Bag A/90cm³ H2810
4SA Epoxy Resin in Unipak Bag B/209cm³ H276
4SA Epoxy Resin in Unipak Bag C/418cm³ H3189
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.108 VOLTEX CATALOGUE
MV Termination Kits
Medium Voltage
TypeCable Size
Kit Reference Product Code(mm)
3 Core 11kV Heat Shrink Splicing Kits
PILC 35-95 HPJ-1 H10395
PILC 120-185 HPJ-2 H10396
PILC 240-300 HPJ-3 H10397
XLPE 16-36 HXJ-1 H10398
XLPE 50-95 HXJ-2 H10399
XLPE 120-185 HXJ-3 H10400
XLPE 240-300 HXJ-4 H10401
3 Core 11kV Heat Shrink Splicing Kits
TypeCable Size Indoor
(450, 750mm Tails)Outdoor
(750, 1200, 1600mm Tails)
(mm) Kit Reference Product Code Kit Reference Product CodePILC 35-95 HPTI-1 - HPTO-1 H10402
PILC 120-185 HPTI-2 - HPTO-2 H10403
PILC 240-300 HPTI-3 - HPTO-3 H10404
XLPE 16-36 HPTI-1 - HPTO-1 H10405
XLPE 50-95 HPTI-2 - HXTO-1 H10406
XLPE 120-185 HPTI-3 - HXTO-2 H10407
XLPE 240-300 HPTI-4 - HXTO-3 H10408
JOINT KITS
Flame Retardant Splicing Kits
Low Tension Splicing Kits with Flame Retardant Mould and Flame Retardant non Halogenated Clear Epoxy Resin No. 52FR
Type Size Product Code
91-A1/W(8mm - 28mm)
H31024 - 10mm²
91-A2/W(14mm - 32mm)
H310316 - 25mm²
91-A3/W(23mm - 39mm)
H310435 - 50mm²
91-A4/W(28mm - 52mm)
H310670mm²
91-A4,5/W(30mm - 55mm)
H310595mm²
91-A5/W(45mm - 70mm)
H10427120 - 150mm²
91-A5/WE with Earthing Kit(45mm - 70mm)
H10428120 - 150mm²
91-A6/W(48mm - 79mm)
H10429185 - 240mm²
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 109VOLTEX CATALOGUE
TypeSize
Product Code(mm)
GPJ0 1,5-4 H2802
GPJ1 4,0-10 H2803
GPJ2 10-16 H2804
GPJ2H 16-35 H290
GPJ3 35-50 H291
GPJ3H 50-95 H292
GPJ4 95-150 H293
GPJ5 150-240 H294
GPJ6 240-300 H4234
Low Voltage Cable Joint
Information:Epoxy resinsIEC / SANS approved
your electrical connection
TypeSize
Product Code(mm)
Dura Joint P0 - S 1.5 - 4 x 4C H268
Dura Joint P1 - S 4.0 - 10 x 4C H269
Dura Joint P2.5 - S 16 - 35 H270
Dura Joint P2 - S 10 - 16 x 4C H271
Dura Joint P3 - S 35 - 50 H273
Dura Joint P3.5 - S 50 - 95 H272
Dura Joint P4 - S 95 - 150 H274
Dura Joint P5 - S 150 - 240 H275
Duracast Resin Cable Joint Kits
JOINT KITSCABLE ACCESSORIES
Cable Tape Splicing Kits
Cable Tape Splicing Kits
TypeSize
Product Code(mm²)
Scotchcast 6.6kV Cable Splicing Kits
92-A5 PILC Cable 16 - 50 H3108
92-A5X XLPE Cable 16 - 50 H10458
Scotchcast 11kV Cable Splicing Kits
Poured Resin Joints, No. 460M Polyurethane92-A11-6 PILC Cable 16 - 150 H3071
92-A11-X6 XLPE Cable 16 - 150 H1724
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.110 VOLTEX CATALOGUE
LUGS AND FERRULESCopper Lugs for Stranded Conductor Cable
Dimension1. The nominal area of the circular stranded
conductor is that of the nominal lug or ferrule size.2. For flexible cables the next highest lug or
ferrule size in relation to the area must be used.3. For compacted cable the heavy duty lugs and
ferrules must be used.
Certain compacted cables vary in nominal diameter and cable diameter must be matched to the lug or ferrule barrel inside diameter.
B A
C D
F
E
Nominal Lug Size
Typical Conductors
Stud Size
Nominal Dimensions Product Code
Circular Stranded
Flexible Stranded
(mm)
Barrel Spade
(mm2) (mm) (mm2) (mm)A B C D E F
I.D O.D Length Length Hole Pos. Width
1,5 3/0,81 1
3
1,9 3,8 7,0
9,0 4,5 7,0 H10283 H964 -
4 12,0 4,5 7,0 H10284 H966 H2551
5 12,0 4,5 8,0 H10285 H967 H2552
6 13,0 5,5 9,0 H10286 H968 H2553
2,5 3/1,04 1,5
3
2,4 3,9 7,3
8,5 4,5 7,0 H10287 H969 -
4 12,0 4,5 7,0 H10288 H971 H2554
5 12,0 4,5 9,0 H10289 H972 H2555
6 13,0 5,5 9,5 H10290 H973 H2556
8 15,0 7,5 12,0 H10291 H975 H2557
4 7/0,86 2,5
3
2,8 4,7
9,0 4,5 7,0 H10292 H976 -
4 12,0 4,5 7,0 H10293 H977 H2559
5 8,0 12,0 4,5 8,5 H10294 H978 H2560
6 13,0 5,5 10,0 H10295 H979 H2561
8 17,0 6,5 13,0 H10296 H980 H2562
10 11,0 19,0 7,5 14,0 H10297 H981 H2563
6 7/1,05 4
4
3,4 5,3
12,0 4,5 7,5 H10298 H2857 H2564
5 12,0 4,5 8,5 H10299 H982 H2565
6 8,5 13,0 5,5 9,5 H10300 H983 H2566
8 9,3 17,0 7,0 13,0 H10301 H984 H2567
10 11,0 19,0 7,5 15,0 H10302 H985 -
10 7/1,36 6
5 10,5 12,0 4,5 9,0 H10303 H987 H2568
6 10,5 13,0 6,0 10,0 H10304 H988 H2569
8 4,4 6,3 11,0 17,0 7,5 13,0 H10305 H989 H2570
10 11,0 19,0 7,5 15,0 H10306 H990 H2571
12 12,0 20,0 10,0 19,0 H10307 H991 H2572
16 7/1,72 10
5 13,0 5,5 10,5 H10308 H993 H2574
6 13,0 5,5 11,0 H10309 H994 H2575
8 5,5 7,6 12,0 18,0 7,5 13,0 H10310 H995 H2576
10 20,0 7,5 15,0 H10311 H996 H2577
12 25,0 10,5 18,0 H10312 H997 H2578
16 27,0 13,0 24,0 H10313 H998 H2579
25
18/1,35
16
6 16,0 6,0 14,0 H10314 H999 H2581
8 17,0 8,0 14,0 H10315 H1000 H2582
19/1,55
10 6,9 9,0 15,0 18,0 8,0 16,0 H10316 H1001 H2583
12 21,0 11,0 18,0 H10475 H1002 H2584
16 27,0 13,0 24,0 H10317 H338 -
Note: • Indent compression recommended for flexible stranded.• Confirm stock and brand availability with your local branch.
Components are tested to IEC 61238-1.
Items above with (-) in the codes column are available on special request.
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 111VOLTEX CATALOGUE
Note: • Indent compression recommended for flexible stranded.• Confirm stock and brand availability with your local branch.
Components are tested to IEC 61238-1.
LUGS AND FERRULES
Items above with (-) in the codes column are available on special request.
Copper Lugs for Stranded Conductor Cable
Nominal Lug Size
Typical Conductors
Stud Size
Nominal Dimensions Product Code
Circular Stranded
Flexible Stranded
(mm)
Barrel Spade
(mm2) (mm) (mm2) (mm)A B C D E F
I.D O.D Length Length Hole Pos. Width
35
18/1,59
25
6 15,0 18,0 8,0 16,0 H10318 H1003 H2585
8 15,0 18,0 9,0 16,0 H10319 H1004 H2586
19/1,55
10 8,2 10,7 15,0 18,0 9,0 16,0 H10320 H1005 H2587
12 15,0 22,0 10,0 18,0 - H1006 H2588
16 16,0 30,0 13,0 24,0 H10321 H1007 H2589
50 18/1,9 19/1,85
35
6 16,0 17,0 8,0 18,0 H10322 H1008 H2590
8 16,0 17,0 9,0 18,0 H10323 H1009 H2591
10 17,0 24,0 10,0 20,0 H10324 H1010 H2592
12 10,0 12,8 18,0 24,0 10,0 20,0 - H1012 H2593
16 18,0 30,0 13,0 26,0 H10325 H1013 H2594
20 18,0 30,0 13,0 26,0 H10326 H3266 -
70 18/2,2519/2,19 50
8 20,5 20,0 9,5 21,0 H10327 H1014 H2597
10 21,0 26,0 11,0 22,0 H10328 H1015 H2598
12 11,7 15,0 21,0 28,0 12,0 22,0 H10329 H1017 H2599
16 22,0 32,0 14,0 28,0 - H1018 H1342
20 22,0 34,0 15,0 30,0 H10330 H1175 H2600
95 36/1,8637/1,83 70
8 24,0 9,5 25,0 H10331 H1019 H2601
10 26,0 13,0 26,0 H10332 H1020 H2602
12 13,5 17,4 23,0 28,0 13,0 26,0 H10333 H1022 H2603
16 32,0 14,0 28,0 - H1023 H2604
20 36,0 16,0 30,0 H10334 H1176 H2605
120
36/2,08
70/95
10 26,0 12,0 27,0 H10335 H1024 H2606
12 28,0 12,0 28,0 H10336 H1025 H2607
37/2,0516 15,5 19,8 26,0 32,0 14,0 30,0 H10337 H1026 H2608
20 36,0 16,0 32,0 H10338 H2861 -
150
36/2,34
95/120
10 31,0 12,5 31,0 H10339 H1027 H2609
12 33,0 16,0 32,0 H10340 H1028 H2610
37/2,2916 17,0 22,0 27,0 35,0 16,0 32,0 H10341 H1029 H1343
20 36,0 16,0 32,0 H10342 H1030 H2661
185
36/2,59
120/150
10 29,0 12,5 34,0 H10343 H1031 H2611
12 31,0 16,0 34,0 H10344 H1032 H2612
37/2,5316 19,0 24,4 29,0 34,0 16,0 36,0 H10345 H1033 H2613
20 H10346 H1179 -
240
60/2,23
150/185
10 36,0 16,0 40,0 H10347 H1180 H2614
12 36,0 16,0 40,0 H10348 H1034 H2615
61/2,2616 21,5 27,7 33,0 38,0 20,0 40,0 H10349 H1884 H2616
20 42,0 20,0 40,0 H10350 H3267 H2617
300 60/2,5561/2,53 185/240
10 35,0 15,0 45,0 H10351 H3268 -
12 24,5 31,3 35,0 35,0 15,0 45,0 H10352 H1289 H2618
16 45,0 15,0 45,0 H10353 H367 -
20 45,0 16,0 45,0 H10354 H2863 H2619
400 91/2,39 240/300 16 27,5 35,6 41,047,0 49,0 - H4281 -
47,0 24,0 51,0 - H4280 H368
500 91/2,67 300/400 31,6 40,0 41,5 54,0 58,0 H369 H4282 -
630 127/2,54 400/500 34,5 44,6 53,0 65,0 64,0 H370 H4283 -
800 127/2,87 630 40,0 51,2 68,0 75,0 73,0 - H4284 -
1000 127/3,22 44,0 56,6 75,0 75,0 81,0 - H4285 -
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.112 VOLTEX CATALOGUE
LUGS AND FERRULESHeavy Duty Copper Lugs for Compacted XLPE Cable 6.35 - 11kV
Nominal Lug Size
SANS1411-1
Nominal Diameter
Over Cond.
Stud Size
Nominal Dimensions
Product Code
(mm)
Barrel Spade
(mm2) (mm)A B C D E F
I.D O.D Length Length Hole Pos. Width
35 7,0 10 7,30 10,50 16,0 24,0 11,0 19,0 H4130
50 8,2 10 8,75 12,30 20,0 24,0 11,0 19,0 H4131
70 9,7 10 10,40 14,60 21,0 27,0 14,0 20,0 H4132
95 11,4 10 12,10 17,00 24,0 28,0 14,0 24,0 H4133
120 12,6 12 14,00 19,10 26,0 28,0 14,0 26,0 H4134
150 14,6 12 15,25 21,30 31,0 37,0 18,0 30,0 H4135
185 15,9 12 17,00 23,70 34,0 40,0 19,0 33,0 H4136
240 16,3 12 20,00 27,10 34,0 41,0 19,0 37,0 H4137
300 20,8 * 21,63 30,50 38,0 48,0 20,0 42,5 H4138
400 23,6 * 24,50 34,64 51,0 49,0 23,5 48,0 H4139
500 26,2 * 28,50 38,90 51,0 52,0 25,0 54,0 H4140
630 30,3 * 33,00 45,00 53,0 65,0 28,0 64,0 H4141
B A
C D
F
ER1
Note: * Stud sizes can be made to customer requirements.
Components are tested to IEC 61238-1.
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 113VOLTEX CATALOGUE
LUGS AND FERRULESAluminium Stranded Circular Cable Lugs
Cable Stud SIzeA B C D E
Palm width Palm Thick
d1 d2 Product Code
(mm2) (mm) "F" "G"
25
8
65,00 28,00
8,40
17,00 12,0015,00 4,00
7,00 11,30
H4158
10 10,40 H4159
12 12,50 21,00 3,00 H4160
35
8
70,00 30,00
8,40
17,00 12,0017,50 4,00
8,30 12,90
H4161
10 10,40 H4162
12 12,50 21,00 3,50 H4163
50
10
70,0 32,00
10,40
17,00 12,0020,00 4,50
9,90 14,70
H4164
12 12,50 H4165
16 16,50 26,00 3,50 H4166
70
10
78,00 36,00
10,40
17,00 12,0023,00 5,00
11,70 17,00
H4167
12 12,50 H4168
16 16,50 26,00 4,50 H4169
95
10
85,00 39,00
10,40
18,00 12,00 27,50 5,50 13,70 19,70
H4170
12 12,50 H4171
16 16,50 H4172
120
10
89,00 45,00
10,40
17,00 12,00 31,00 6,50 15,30 22,20
H4173
12 12,50 H4174
16 16,50 H4175
150
12
100,00 48,00
12,50
20,00 16,00 34,50 7,00 17,20 24,70
H4176
16 16,50 H4177
20 20,50 H4178
185
12
108,00 53,00
12,50
20,00 16,00 38,00 7,50 19,00 27,30
H4179
16 16,50 H4180
20 20,50 H4181
240On request
118,00 57,00On request
22,00 18,00 43,50 8,50 21,80 31,00 H4182
300 132,00 62,00 25,00 20,00 49,00 9,50 24,90 35,00 H4183
Note:Components are tested to IEC 61238-1.
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.114 VOLTEX CATALOGUE
Note:Components are tested to IEC 61238-1.
LUGS AND FERRULESAluminium 3 Core Sector Shaped Cable Lugs
Cable Stud SIzeA B C D E
Palm width Palm Thick
d1 d2 Product Code
(mm2) (mm) "F" "G"
25
8
65,00 28,00
8,40
17,00 12,0015,00 4,00
5,20 8,73
H4184
10 10,40 H4185
12 12,50 21,00 3,00 H4186
35
8
70,00 30,00
8,40
17,00 12,0017,50 4,5
5,90 10,05
H4187
10 10,40 H4188
12 12,50 21,00 3,50 H4189
50
10
70,00 32,00
10,40
17,00 12,0022,00 4,50
7,25 11,85
H4190
12 12,50 H4191
16 16,50 26,00 3,50 H4192
70
10
78,00 36,00
10,40
17,00 12,0024,00 5,00
8,5 14,10
H4193
12 12,50 H4194
16 16,50 26,00 4,50 H4195
95
10
82,00 38,00
10,40
18,00 12,00 28,00 6,00 9,55 16,35
H4196
12 12,50 H4197
16 16,50 H4198
120
10
88,00 45,00
10,40
17,00 12,00 31,00 6,50 11,05 18,50
H4199
12 12,50 H4200
16 16,50 H4201
150
12
103,00 48,00
12,50
20,00 18,00 34,00 7,00 12,15 20,60
H4202
16 16,50 H4203
20 20,50 H4204
185
12
106,00 53,00
12,50
20,00 18,00 38,00 8,50 13,40 22,48
H4205
16 16,50 H4206
20 20,50 H4207
240On request
118,00 57,00On request
22,00 18,00 43,50 8,50 15,55 26,05 H4208
300 132,00 62,00 25,00 20,00 49,00 10,00 17,35 29,00 H4209
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 115VOLTEX CATALOGUE
LUGS AND FERRULESAluminium 4 Core Sector Shaped Cable Lugs
Cable Stud SIzeA B C D E
Palm width Palm Thick
d1 d2 Product Code
(mm2) (mm) "F" "G"
25
8
65,00 25,00
8,40
17,00 12,0015,00 4,00
5,80 7,88
H4210
10 10,40 H4211
12 12,50 21,00 3,00 H4212
35
8
70,00 30,00
8,40
17,00 12,0017,50 4,5
7,10 9,70
H4213
10 10,40 H4214
12 12,50 21,00 3,50 H4215
50
10
70,00 32,00
10,40
17,00 12,0020,00 4,50
8,35 10,95
H4216
12 12,50 H4217
16 16,50 26,00 3,00 H4218
70
10
78,00 36,00
10,40
17,00 12,0023,00 5,00
9,30 13,00
H4219
12 12,50 H4220
16 16,50 26,00 4,50 H4221
95
10
85,00 39,00
10,40
18,00 12,00 27,50 5,70 10,85 15,10
H353
12 12,50 H1021
16 16,50 H4222
120
10
89,00 45,00
10,40
17,00 12,00 31,00 6,50 12,05 17,00
H4223
12 12,50 H4224
16 16,50 H4225
150
12
100,00 48,00
12,50
20,00 16,00 34,50 7,20 13,80 18,80
H4226
16 16,50 H4227
20 20,50 H4228
185
12
108,00 53,00
12,50
20,00 16,00 38,50 8,00 15,25 21,00
H363
16 16,50 H4229
20 20,50 H4230
240On request
118,00 57,00On request
22,00 18,00 43,50 8,50 17,35 23,80 H4231
300 132,00 62,00 25,00 20,00 49,00 9,70 19,50 26,40 H4232
Note:Components are tested to IEC 61238-1.
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.116 VOLTEX CATALOGUE
LUGS AND FERRULES
Heavy Duty Copper Ferrules for Compacted XLPE Cable 6.35 - 11kV
Copper Ferrules for Stranded Conductor Cable
Nominal Sleeve Size
Nominal DimensionsTypical
Conductors Circular Stranded
Product Code
(mm)
I.D O.D Length
(mm2) A B C (mm)
1,5 1,9 3,6 13,0 3/0,81 H10367 H121 H2514
2,5 2,4 3,9 14,0 3/1,04 H10368 H124 H2515
4 2,8 4,7 16,0 7/0,86 H10369 H126 H2516
6 3,4 5,3 18,0 7/1,05 H10370 H129 H2517
10 4,4 6,3 20,0 7/1,36 H10371 H131 H2518
16 5,5 7,6 22,0 7/1,72 H10372 H133 H2519
25 6,9 9,0 25,0 18/1,35 H2174 H137 H2520
35 8,2 10,7 28,0 18/1,59 H2175 H141 H2521
50 10,0 12,8 31,0 18/1,90 H2176 H144 H2522
70 11,7 15,0 35,0 18/2,25 H23 H147 H2523
95 13,5 17,4 39,0 36/1,86 H2928 H151 H2524
120 15,5 19,8 43,0 36/2,08 H2177 H155 H2525
150 17,0 22,0 48,0 36/2,34 H2178 H159 H2526
185 19,0 24,4 54,0 36/2,59 H10373 H162 H2527
240 21,5 27,7 60,0 60/2,23 H10374 H165 H2528
300 24,5 31,3 67,0 60/2,55 H10375 H167 H2529
400 27,5 35,6 80,0 91/2,39 H10376 H3265 H2530
500 31,6 40,0 90,0 91/2,67 H10377 H4154 -
630 34,5 44,6 110,0 127/2,54 H10378 H4155 -
800 40,0 51,2 130,0 127/2,87 H10379 H4156 -
1000 44,0 56,6 154,0 127/3,22 H10380 H4157 -
Nominal Ferrule Size
Nominal Dimensions
Product Code(mm)
I.D O.D Length
(mm2) A B C
35 7,30 10,5 38 H4142
50 8,75 12,3 42 H4143
70 10,40 14,6 43 H4144
95 12,10 17,0 45 H4145
120 14,00 19,1 55 H4146
150 15,25 21,3 58 H4147
185 17,00 23,7 64 H4148
240 20,00 27,1 70 H4149
300 21,63 30,5 75 H4150
400 24,50 34,6 80 H4151
500 28,50 38,9 90 H4152
630 33,00 45,0 100 H4153
C
AB
Note:Components are tested to IEC 61238-1.
For items marked with a dash (-) please enquire at branch or reference website
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 117VOLTEX CATALOGUE
LUGS AND FERRULESAluminium Ferrules
Cable AStranded 3 Core 4 Core
D1 D2 Product Code H W Product
Code H W Product Code(mm2) (mm)
25 66 7,00 11,30 H135 5,20 8,73 H4286 5,8 7,88 H4296
35 70 8,30 12,90 H139 10,05 5,90 H4287 7,10 9,70 H4297
50 74 9,90 14,70 H142 11,85 7,25 H4288 8,35 10,95 H4298
70 78 11,70 17,00 H145 14,10 8,25 H4289 9,30 13,00 H4299
95 84 13,70 19,70 H149 16,35 9,55 H4290 10,85 15,10 H4300
120 91 15,30 22,20 H153 18,50 11,05 H4291 12,50 17,00 H4301
150 102 17,20 24,70 H157 20,60 12,15 H4292 13,80 18,80 H4302
185 108 19,00 27,30 H160 22,40 13,40 H4293 15,25 21,00 H4303
240 118 21,80 31,00 H163 26,05 15,55 H4294 17,35 23,80 H4304
300 130 24,90 35,00 H4233 29,00 17,35 H4295 19,50 26,40 H4305
Note:Components are tested to IEC 61238-1.
Stranded 3 Core 4 Core
A
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.118 VOLTEX CATALOGUE
PRE-INSULATED TERMINALS
W
F
L
Model Wire Range
ColourStud Size Dimensions
Product Code(mm²) (mm) W L F
1R3
0,25 - 1,65 Red
3,2 5,5 17,5 5,0 H526
1R4 4,3 8,0 20,5 7,0 H527
1R5 5,3 8,0 20,5 7,0 H528
1R6 6,4 11,6 26,8 11,0 H529
1R8 8,4 11,6 26,8 11,0 H530
1R10 10,5 13,6 30,5 13,9 H525
2R35
1,04 - 2,63 Blue
3,7 6,6 17,8 6,6 H532
2R4 4,3 8,5 21,8 8,5 H533
2R5 5,3 9,5 21,8 9,5 H534
2R6 6,4 12,0 26,8 11,0 H535
2R8 8,4 12,0 26,8 11,0 H536
2R10 10,5 13,6 30,5 13,9 H531
3R35
2,63 - 6,64 Yellow
3,7 7,2 22,7 6,1 H539
3R4 4,3 9,5 26,6 9,1 H540
3R5 5,3 9,5 26,6 9,1 H541
3R6 6,4 12,0 29,5 10,5 H542
3R8 8,4 15,0 34,0 13,5 H543
3R10 10,5 15,0 34,0 13,5 H537
3R12 12,0 19,2 38,6 16,0 H538
W
F
L
ModelWire Range
ColourStud Size Dimensions Product
Code(mm²) (mm) W L F1S35
0,25 - 1,65 Red
3,7 6,4 21,0 6,5 H306
1S4A 4,3 6,4 21,0 6,5 H307
1S5A 5,3 8,1 21,0 6,5 H308
1S6A 6,4 9,5 21,0 6,5 H309
2S35
1,04 - 2,63 Blue
3,7 6,0 21,0 6,5 H310
2S4A 4,3 6,4 21,0 6,5 H311
2S5A 5,3 7,9 21,0 6,5 H312
2S6A 6,4 9,3 21,0 6,5 H313
3S4A
2,63 - 6,64 Yellow
4,3 8,3 25,5 7,0 H314
3S5 5,3 9,0 25,5 7,0 H315
3S6A 6,4 9,0 25,5 7,0 H316
W
F
L
Model Wire Range
ColourDimensions Product
Code(mm²) W L F
1P10 0,25 - 1,65 Red 1,9 19,8 10,0 H371
2P10
1,04 - 2,63 Blue
1,9 19,8 10,0 H372
2P12 1,9 21,8 12,0 H1035
3P13 2,63 - 6,64 Yellow 2,8 27,0 13,0 H373
Insulated Ring Terminals
Insulated Spade Terminals
Insulated Pin Terminals
0,5 - 1,5mm² - 19Amp 600V 1,5 - 2,5mm² - 27Amp 600V 4,0 - 6,0mm² - 48Amp 600V
Note:• Lead times need to be confirmed at the time the order is placed.
W
F
F
F
L
L
L
W
W
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 119VOLTEX CATALOGUE
PRE-INSULATED TERMINALS
C
L
D
ModelWire Range
ColourDimensions Product
Code(mm²) D C L
1UT 0,25 - 1,65 Red 4,0 1,7 24,6 H120
2UT 1,04 - 2,63 Blue 4,5 2,3 24,6 H123
3UT 2,63 - 6,64 Yellow 6,3 3,4 26,5 H128
L
W
F
ModelWire Range
ColourDimensions Product
Code(mm²) W L F1FB10
0,25 - 1,65 Red
2,3 19,8 10,0 H512
1FB11 3,0 20,8 11,0 H513
1FB14 3,0 23,8 14,0 H514
1FB18 2,2 27,8 18,0 H515
2FB91,04 - 2,63 Blue
2,8 18,8 9,0 H516
2FB18 2,2 27,8 18,0 H517
3FB102,63 - 6,64 Yellow
2,8 23,0 10,0 H519
3FB14 4,5 27,0 14,0 H520
L
W
F
ModelWire Range
ColourDimensions Product
Code(mm²) W L F
1HB30,25 - 1,65 Red
3,0 27,2 16,8 H522
1HB 4,6 27,2 16,8 H521
2HB 1,04 - 2,63 Blue 4,6 27,2 16,8 H523
3HB 2,63 - 6,64 Yellow 4,6 30,2 17,2 H524
W
F
L
ModelWire Range
ColourDimensions Product
Code(mm²) W L F1DM4
0,25 - 1,65 Red4,8 19 6,5 A8478
1DM 6,35 21 7,7 H504
2DM41,04 - 2,63 Blue
4,8 10 6,5 H9960
2DM 6,35 21 7,7 H508
3DM 2,63 - 6,64 Yellow 6,35 24 7,7 H511
Insulated Ferrules
Insulated Blade Terminals
Insulated Hook Blade Terminals
Insulated Male Disconnects
Note:• Lead times need to be confirmed at the time the order is placed.
C
L
L
L
L
F
F
F
D
W
W
W
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.120 VOLTEX CATALOGUE
PRE-INSULATED TERMINALS
W
F
L
ModelWire Range
ColourDimensions Product
Code(mm²) W L F1DF2
0,25 - 1,65 Red
3,2 18,6 6,5 H503
1DF4 5,0 19,0 6,4 H10249
1DF 6,6 20,5 7,3 H502
2DF4
1,04 - 2,63 Blue
5,0 19,0 6,4 H507
2DF 6,6 20,5 7,3 H506
2DF9 10,0 25,5 12,0 H10250
3DF2,63 - 6,64 Yellow
6,6 23,5 7,3 H510
3DF9 10,0 28,5 12,0 H10251
W
F
L
ModelWire Range
ColourDimensions Product
Code(mm²) W L FF1DF2
0,25 - 1,65 Red
3,8 19,0 6,4 H10252
F1DF4 5,0 19,3 6,4 H10253
F1DF 6,6 22,0 7,3 H10254
F2DF41,04 - 2,63 Blue
5,0 19,3 6,4 H10255
F2DF 6,6 22,0 7,3 H10256
F3DF2,63 - 6,64 Yellow
6,6 24,0 7,3 H10257
F3DF9 10,0 28,5 12,0 H10258
W
L
F
ModelWire Range
ColourDimensions Product
Code(mm²) W L F
1PB 0,25 - 1,65 Red 6.6 22.0 8.0 H2330
2PB 1,04 - 2,63 Blue 6.6 22.0 8.0 H2329
W
L
F
ModelWire Range
ColourDimensions Product
Code(mm²) W L F
1ULM4 0,25 - 1,65 Red 4,0 21,5 8,5 H2303
2ULM4 1,04 - 2,63 Blue 4,0 21,5 8,5 H2305
3ULM4
2,63 - 6,64 Yellow
4,0 24,0 8,5 -
3ULM5 5,0 24,0 8,5 H9449
Insulated Female Disconnects
Fully Insulated Female Disconnects
Insulated Piggy Back Disconnects
Insulated Male Bullet Disconnects
Note:• Lead times need to be confirmed at the time the order is placed.
L
L
L
L
F
F
F
F
W
W
W
W
CABLE ACCESSORIES
Items above with (-) in the codes column are available on special request.
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 121VOLTEX CATALOGUE
PRE-INSULATED TERMINALS
W
L
F
ModelWire Range
ColourDimensions Product
Code(mm²) W L F
1ULF4 0,25 - 1,65 Red 3,9 21,5 7,3 H2302
2ULF41,04 - 2,63 Blue
3,9 25,5 7,3 H2304
2ULF5 5,9 25,5 7,0 -
3ULF4 2,63 - 6,64 Yellow 4,9 24,5 7,0 H9491
WL
ModelWire Range
ColourDimensions Product
Code(mm²) W L
1QS 0,25 Red 20,0 27,0 H387
2QS 2,0 Blue 20,0 27,0 H388
3QS 5,5 Yellow 20,5 34,5 H74
Insulated Female Bullet Disconnects
Quick Splice Connectors
0.5 - 1,5mm² - 19Amp 600V 1.5 - 2,5mm² - 27Amp 600V 4 - 6mm² - 48Amp 600V
Note:• Lead times need to be confirmed at the time the order is placed.
E - InsulatedL
F
BW
CD
W
ModelWire Range
DimensionsProduct Code(mm)
(mm²) Colour L F W B C D
E0510 0.5 White 10.0 16.0 2.6 6.0 1.0 1.3 H111
E0710 0.75 Blue 10.0 16.3 3.0 6.3 1.2 1.5 H112
E01010 1.0 Red 10.0 16.3 3.0 6.3 1.4 1.7 H113
E01510 1.5 Black 10.0 16.4 3.5 6.3 2.0 1.7 H114
E02512 2.5 Grey 12.0 19.4 4.0 7.4 2.3 2.6 H116
E4012 4.0 Orange 12.0 19.4 4.5 7.4 2.8 3.2 H117
E6012 6.0 Green 12.0 20.5 6.0 8.5 3.5 3.9 H118
E10012 10.0 Brown 12.0 20.8 7.5 8.8 4.5 4.9 H10261
Insulated Female Disconnects
L
L
D
L
F
BW
C
W
F
W
W
CABLE ACCESSORIES
Items above with (-) in the codes column are available on special request.
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.122 VOLTEX CATALOGUE
BRASS TERMINALS
C
W
L
ModelWire Range Dimensions
Product Code(mm²) L C W
UDF
0.5 - 2.0
19.0 7.5 6.6 H3078
UDF 2 16.0 6.4 3.2 H9908
C
W
L
ModelWire Range Dimensions
Product Code(mm²) L C W
UDM 0.5 - 2.0 20.0 7.5 6.3 H7479
Uninsulated Disconnect - Female
Uninsulated Disconnect - Male
Note:• Lead times need to be confirmed at the time the order is placed.
PRE-INSULATED TERMINALS
Type Model DescriptionQuantity of
Each Component
Content Product Code
K150T Pre-Insulated Terminal Kit complete with Crimping Tool 10/5
1R4, 2R4, 2R5, 1S35, 2S35, 1UT, 2UT, 3R5, 3S5, 3UT, 1DF, 2DF,
1DM, 2DM
YL2001 (Crimping Tool)
O2001
K175 Pre-Insulated Terminal Kit 15/10/52R35A, 1UT, 2UT, 1DF, 2DF, 1DM, 2DM, 1R4, 1R5, 2R4, 2R5, 1S35,
3UT, 3R5H10281
K300 Pre-Insulated Terminal Kit 25/20/15/10/51R4, 1R5, 1S35, 2R4, 1DF, 2DF,
1DM, 2DM, 2R35A, 2R5, 1UT, 2UT, 3R5, 3R6, 3UT
H10282
Pre-packs
W
W
C
C
L
L
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 123VOLTEX CATALOGUE
Pre-Packs
ModelWire Range
Qty Per Pack Product Code(mm)
1R6 0.34 - 1.57 10 H963
1R5 - 10 H1154
1R4 - 10 H1161
2R6 1.17 - 3.24 8 H1167
2R5 - 10 H1169
2R4 - 10 H1246
3R8 2.5 - 6.0 6 H1247
3R6 - 6 H1170
3R5 - 6 H1249
1S35 0.34 - 1.57 10 H1144
1S4A - 10 H1145
2S35 1.17 - 3.24 10 H1146
2S5A - 10 H1147
1P10 0.34 - 1.57 10 H1148
2P12 1.17 - 3.24 10 -
1UT 0.34 - 1.57 10 H1150
2UT 1.17 - 3.24 8 H1151
1DM 0.34 - 1.57 10 H1152
2DM 1.17 - 3.24 10 H1153
1DF 0.34 - 1.57 10 H1155
2DF 1.17 - 3.24 10 H1156
1PB 0.34 - 1.57 10 H1369
2PB 1.17 - 3.24 6 H1370
1ULM4 0.34 - 1.57 8 H1157
2ULM4 1.17 - 3.24 8 H1158
1ULF 0.34 - 1.57 8 H1159
2 ULF 1.17 - 3.24 8 H1160
Lug Pre Pack Assorted H1241
1S5A 0.34 - 1.57 10 H1162
2S4A 1.17 - 3.24 10 H1163
1DF2 0.34 - 1.57 10 H1320
1DF4 - 10 H1164
2DF4 1.17 - 3.24 10 H1321
3DF 2.5 - 6.0 8 H1165
3DM - 8 H1166
3DF9 - 5 H1242
F1DFY 0.34 - 1.57 5 H1371
F2DFY 1.17 - 3.24 5 H1243
3UT 2.5 - 6.0 6 H1168
3R10 - 5 H1245
Wall mounted stand comprising of 10 packs of 43 most popular types of terminals, which includes an Assortment Pack (PRPK28) and a Tool Kit (Crimper + Assortment Pack PRPK 29) of terminals. Ideal for electricians and handymen.
PRE-INSULATED TERMINALSCABLE ACCESSORIES
Items above with (-) in the codes column are available on special request.
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.124 VOLTEX CATALOGUE
3M TAPES
Vinyl Electrical Tapes
Corrosion Protection Tapes
Speciality Tapes
Type Name DescriptionThickness Temperature
Rating Applications Sizes Product Code
(mm) (°C)
Scotch® Super 33+ Premium Vinyl
Electrical Tape
Highly conformable in all weather applications.
Resists UV rays, abrasion,corrosion, alkalis acids. Flame retardant UL
listed. CSA callsified.
0,18 105°CPrimary insulation for splices up to 600V.
Protective jacketing.19mm x 20m H1420
Scotch 35 Colour Coding Tape
9 Fade resistant colours, excellet insulating
properties. Resists UV rays, abrasion, corrosion, alkalis
& acids
0.18 105°CPhase indintification
& marking. Harnessing.
19mm x 20m
H477
H478
H479
H480
H481
Scotch 22 Heavy Duty Vinyl Electrical
Tape
Thicker for increased mechanical strength,
abrasion resistant. UL listed. CSA certified. Electrical
insulating
0,25mm 105°CPrimary insulation for splices up to 600V.
Protective jacketing.
24mm x 30m H1432
36mm x 30m H471
3M 33 Vinyl Electrical Tape
Spcification grade vinyl insulation tape. Flame
retardant0.18 80°C
Primary insulation for splices up to 600V.
Protective jacketing.
9mm x 6m -
18mm x 6m -
18mm x 20mm H1420
Scotch 1710 Vinyl Electrical Tape
A good quality electrical vinyl insulating tape. Flame
retardant. SABS122 specified0.18 80°C Protective jacketing.
Harnessing.18mm x 20m
H1202
H1203
H1204
H1205
H1206
H1207
Type Name DescriptionThickness Temperature
Rating Applications Sizes Product Code
(mm) (°C)
Scotch 27 Glass Cloth Tape
Woven insulating glass cloth. High temperature resistance. High mechanical strength. UL
recognised.
0.18mm 27 is Class B temp 130°C
Heat-stable insulation for
furnace & oven controls, motor leads
& switches
12mm x 20m H1306
19mm x 20m H1307
12mm x 55m H2670
25mm x 55m H2671
Type Name DescriptionThickness Temperature
Rating Applications Sizes Product Code
(mm) (°C)
Scotchwrap® 50&51 All weather
Corrosion Protection Tape
All weather performances & resistance. Resistant to
impact & abrasions.
0,25
80°CCorrosion protection on pipes, conduits,
joints, etc.
Various x 30m
H2625
0,5 H482
CABLE ACCESSORIES
Items above with (-) in the codes column are available on special request.
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 125VOLTEX CATALOGUE
3M TAPES
Insulating and Splicing Tapes
Type Name DescriptionThickness Temperature
Rating Applications Sizes Product Code
(mm) (°C)
Scotch 13 Semi-Conducting Tape
Rubber tape, Semi-conductive.
Compatible with cable semi-conductive jackets.
0,76 continuous: 90°Cshort term: 130°C
Electrically round high voltage connections.
Provides cable shield continuation.
18mm x 4,5m H1200
Scotch 23 Self-Fusing Rubber Tape
High & low voltage insulating, self-fusing rubber
tape.0,76 continuous: 90°C
short term: 130°C
Primary electrical insulation for
splicing all solid dielectric cables
through 69kV.
18mm x 9m H472
24mm x 9m H10193
Scotch 24 Shielding Tape
All metal open weave shielding braid,
conformable, temperature stable.
Continued electrostatic
shielding across splice.
25mm x 4,5m H10194
Scotch 25 & 26 Grounding Braid
All metal woven braid. High current carrying capacity of
12mm2 wire.Solderable
Gorunding of HV splices & terminations.
12mm x 4,5m H10195
25mm x 5m H2669
Scotch 70 Self-Fusing Silicone Rubber Tape
Arc & tracking resistant self-fusing, long lasting
silicone rubber.0,3mm 180°C
Protective over-wrap for terminating high
voltage cables.24mm x 9m H483
Scotchfil™ Electrical Insulation
Putty
Black, self-fusing, insulating putty in tape form 3,2mm 80°C
Insulate bus bars, motor lead
(re-entry) service drop connections.
38mm x 1,5m H2621
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.126 VOLTEX CATALOGUE
3M TAPES
3M Tape Applications
Scotch™ Super 33+ Vinyl Electrical Tape
Scotch™ Super 33+ Vinyl Electrical Tape is a black 0.18mm is a premium grade
all-weather vinyl electrical insulating tape with an aggressive adhesive and elastic
backing that enables it to easily conform to irregular surfaces for water resistant elec-
trical and mechanical protection. Scotch Super 33+ is highly conformable and super
stretchy in all weather applications. This tape provides flexibility and easy handling for
all round performances in cold to -18°C and is designed to perform in a continuous
temperature environment up to 105°C.
Scotch 35 Vinyl Electrical Tape
Scotch 35 Vinyl Electrical Tape 0.18mm is a premium grade electrical vinyl tape which
stretches to conform to virtually any shape which requires colour-coded insulation.
Available in nine fade resistant colours. Scotch 35 Vinyl Electrical Colour Coding Tape is
used in phase identification, colour coding leads and piping systems and for marking
safety areas. This tape is abrasion-and weather-resistant, with excellent mechanical
and electrical insulation properties which wraps smoothly and holds tight over a wide
range of temperatures. Flame-retardant and excellent all-weather performance in cold
to -18°C or hot to 105°C.
Scotch 22 Vinyl Insulation Tape
Scotch 22 Vinyl Insulation Tape is a black 0.25mm tape and one of 3M’s thickest vinyl
electrical tapes. It seals in all kinds of weather and provides moisture-tight electrical and
mechanical protection with fewer wraps than thinner tapes. Scotch 22 Heavy Duty Vinyl
Insulation Tape is designed for heavy duty insulation applications that require greater
mechanical strength and abrasion resistance. UL listed for use as electrical insulation
up to 600 volts and 80°C. UL 510 is flame-retardent.
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 127VOLTEX CATALOGUE
NITTO INSULATION TAPE
Insulation Tape
TypeThickness Width Length
Colour Product Code(mm) (mm) (mm)
Heavy Duty
0.2 18 20
Red H459
Green H458
Blue H457
Yellow H462
Black H456
White H460
Light Duty
0.13 19 20
Red H2664
Green H2663
Blue H4312
Yellow H2666
Black H3272
White H2665
Tapes
TypeSize
Product Code(mm)W H L
Barrier Tape
75 75 500 H485
Detector Tape
Skull and crossbones
75 150 500 H484
Danger Tape
Danger sign
75 150 500 H1208
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.128 VOLTEX CATALOGUE
CABLE TIES AND STRAPPING
Hellerman Cable Tie Chart
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540
mm
Nylon Cable TiesProduct Code
CradlesProduct Code
Model
Min. Tensile Strenght
(N) Nylon
Bundle Lenght WidthModel
Length Width Height Cable Tie Width
(mm) (mm) (mm) Black White (mm) (mm) (mm) (mm) Black White
T18R 80 22 100 2.5 H575 H579
TY3 20 14 4.5 Up to 3.5 H445 H443
TY8 32 25 6.0 Up to 7.5 H1984 H1983
T30R 135 35 150 3.5 H585 H588
T50R 225 50 200 4.6 H608 H612
T50I 225 85 300 4.6 H594 H598
T50L 225 110 390 4.6 H604 H606
T12OS 535 55 225 7.6 O206 H612
T12OR 535 105 390 7.6 H618 H619
LK5BK 1115 150 535 13.2 H574 -
CABLE ACCESSORIES
T18R
T50L
T50R
T12OR
T30R
T12OS
T50I
LK5BK
Items above with (-) in the codes column are available on special request.
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 129VOLTEX CATALOGUE
CABLE TIES AND STRAPPING
Type HT Code L x W Average Tensile
Strength
Maximum Cable Bundle
Diameter
Product Code
REL100 100 x 6.5 26 21 H10476
REL140 145 x 7.5 30 35 H10477
REL150 770 x 8.8 100 225 H10478
REL250 250 x 7.5 30 68 H10479
SOFTXXL 880 x 28 35 H10480
SOFTXL 580 x 28 35 H10481
SOFTL 340 x 11 12 H10482
SOFTM 260 x 11 12 H10483
SOFTS 260 x 7 5 H10484
SOFTXS 180 x 7 5 H10485
Type HT Code L x W Average Tensile
Strength
Maximum Cable Bundle
Diameter
Product Code
MLT8SS5/10 230 x 5/10 13.0/28.8 60 H10486
MLT12SS5/10 330 x 5/10 13.0/28.8 90 H10487
MLT16SS5/10 430 x 5/10 13.0/28.8 120 H10488
MLT24SS5/10 630 x 5/10 13.0/28.8 180 H10489
MAT8SS7/12 230 x 7/12 8.2/12.8 60 H10490
MAT12SS7/12 330 x 7/12 8.2/12.8 90 H10491
MAT16SS7/12 430 x 7/12 8.2/12.8 120 H10492
MAT24SS7/12 630 x 7/12 8.2/12.8 180 H10493
Release Cable Ties
Stainless Steel Cable Ties
CABLE ACCESSORIES
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.130 VOLTEX CATALOGUE
CABLE TIES AND STRAPPING
ME.T Nylon Cable Ties with Stainless Steel Tooth
ThespecialdesignoftheME.Tcabletieguaranteesmaximumresistanceandsafetyeveninthemostextremeapplications.
SizeItems per Bag Colour Maximum
DiameterOpening load /
ExtractionArticle Code
Product Code(mm) (kg/daN)
100 x 2,5 100White 24 18 MET.2.2102R H10086
Black 24 18 MET.3.2102R H10087
200 x 2,5 100White 55 18 MET.2.2105R H10176
Black 55 18 MET.3.2105R H10088
140 x 3,5 100White 36 28 MET.2.2110R H10177
Black 36 28 MET.3.2110R H10089
200 x 3,5 100White 55 28 MET.2.2111R H10178
Black 55 28 MET.3.2111R H10090
280 x 3,5 100White 80 28 MET.2.2112R H10179
Black 80 28 MET.3.2112R H10091
186 x 4,5 100White 51 40 MET.2.2123R H10180
Black 51 40 MET.3.2123R H10092
290 x 4,5 100White 76 40 MET.2.2140R H10181
Black 76 40 MET.3.2140R H10094
360 x 4,5 100White 101 40 MET.2.2126R H10182
Black 101 40 MET.3.2126R H10093
360 x 7,5 50White 101 80 MET.2.2534R H10183
Black 101 80 MET.3.2534R H10095
Note:We can supply heat resistant, UV-stabilised, VO self-extinguishing and coloured cable ties to order.
Comparative Cold-resistance Test Comparative Tie Opening Tests
ME.T ME.T
SEL SEL
2,5 3,5 4,5 7,5
-40°C
-30°C
-20°C
-10°C
0°C -40 -25 -40 -25 -25 -15 -25 -15
80 daN
60 daN
40 daN
20 daN
0 daN2,5 3,5 4,5 7,5
18 11 28 20 40 28 80 65
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 131VOLTEX CATALOGUE
CABLE AND WIRE MARKERS
Ovalgrip Cable Markers
Type Material Data
0 1 2 3 4 5 6 +07 -98 /A9 Z
Materials Flexible Polyvinyl Chloride, cadmium free (PVC)
Colour White, yellow, international resistor colour code
Operating Temperature 65°C to +85°C, Intermittent +135°C
Flammability Self extinguishing
Specification BS 2782-540B, BS 6746C, UL224, IEC 304, IEC 757
Type Cable DimensionsPackaging
ArrowtagProduct Code
OD (mm²) Tag
LenghtCharacters
(mm) (mm) 0 - 9 A - Z
1,5 3,6 500 AT1 62,5 9 H1486 H1487
2,5 5,9 100 AT2 63 11 H1489 H1490
AT3 100 19 - -
Features and Benefits
Ovalgrip markers have been specifically designed to mark cable and wire both before and after termination.
Their oval shape means that these markers are easy to fit by hand directly onto the cable pre-termination or they can be attached as an identification flag post-termination using special marker Arrowtags. Arrowtags fitted with Ovalgrip are fastened using cable ties and can very easily be modified or removed without the need to uninstall the cable.
Sizes 50 and 85 can be used with Arrowtags for identifying larger cable bundles.
Application
Ideally suited to panel building, mass transit, utilities, telecommunications and electrical contracting.
• Flexible PVC (High temperature 85°C).• Coding A-Z and 0-9.• Custom marking on request.• HO markers available, black on yellow or white.• International colour coding.• Standard packets of: H085 = 100, HO50 = 500• May be filed directly on the cable or alternatively
onto “Arrow Tags”.
Note: Arrowtags will accept Hellerman Tyton Insulok Cable Ties from 2.5 - 5mm (T18 - T50 Series).
CABLE ACCESSORIES
Items above with (-) in the codes column are available on special request.
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.132 VOLTEX CATALOGUE
CABLE AND WIRE MARKERS
Helagrip Cable Markers
Type Material Data
0 1 2 3 4 5 6 +07 -98 /A9 Z
Materials Flexible Polyvinyl Chloride, cadmium free (PVC)
Colour White, yellow, international resistor colour code
Operating Temperature -65°C to +105°C. Intermittent +135°C
Flammability Self extinguishing
Specification BS 2782 - 540B, BS 6746C, UL224, IEC 684 - 3 - 113
Type Cable Dimensions Quantity PerApplicator
ToolsProduct Code
TJC applicator tools.
OD Packet Reel
(mm) 0 - 9 A - Z
1,0 - 3,0 500 1000 TJC13 H1465 H1466
2,0 - 5,0 500 1000 TJC25 H1468 H1469
3,0 - 6,0 500 250 TJC36 H1471 H1472
4,0 - 9,0 250 - TJC49 H1474 H1475
Features and Benefits
Helagrip is a versatile and cost effective cable identification system. The specially designed internal profile allows one size of marker to be fitted onto a wide range of cable diameters. Helagrip’s chevron cut ensures that the markers lock together, enabling the text legend to stay in place where cable movement or vibration is likely. The flexible material ensure that Helagrip cable markers always fit securely onto the wire.
NoteHelagrip Markers - Chevron cut available colour coded, black on yellow or black on white.
Application
Ideally suited to panel building, mass transit, utilities, telcommunications and electrical contracting. Helagrip is supplied on a reel for ease of use. Markers are available as standard in international resistor colour code and yellow material marked in black. White material marked in black is available on special order. Characters are 0 - 9, A - Z and standard electrical symbols. For smaller cables and wire it is recommended that you use the AD applicator or the TJC installation tool.
• Flexible PVC (High temperature 85°C).• Coding A-Z and 0-9.• Custom marking on request.• HO markers available, black on yellow or white.• International colour coding.• Standard packets of: H085 = 100, HO50 = 500• May be filed directly on the cable or alternatively
onto “Arrow Tags”.
CABLE ACCESSORIES
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 133VOLTEX CATALOGUE
Type Description and Size Product Code
CONN HIHT 05A/12W H2488
CONN HIHT 10A/12W + FT H2491
CONN HIHT 10A/12W + FT H2492
CONN HIHT 10A/12W + FT/WP H2493
CONN HIHT 10A/12W H2494
CONN HIHT 10A/12W + WP H2495
CONN HIHT 16A/12W+ FT H2498
CONN HIHT 16A/12W+ FT/WP H2499
CONN HIHT 16A/12W H2500
CONN HIHT 16A/12W+ WP H2501
CONN LOHT 16A/12W BLACK -
CONN LOHT 16A/12W WHITE H3134
CONN HIHT 32A/12W H2504
Type Description and Size Product Code
12W BLACK H88
12W TRANS H2490
12W TRANS H2497
12W BLACK H90
12W BLACK H92
12W TRANS H93
12W BLACK H94
12W TRANS H2506
12W BLACK H96
Electro Terminal Hi-Heat Strip Connectors
PVC Strip Connectors
CONNECTORS
Type Description and Size Product Code
Scruit Porcelain MidgetMidget up to 4mm H97
Scruit Porcelain NormalNormal up to 10mm H99
Type Description and Size Product Code
Porcelain in 6A 2-Way CFH C402 H79
Porcelain in 15A 2-Way CFH C404 H81
Porcelain in 30A 2-Way CFH C406 H82
Porcelain in 6A 3-Way CFH C403 H84
Porcelain in 15A 3-Way CFH C405 H86
Porcelain in 30A 3-Way CFH H87
Porcelain Scruits
Porcelain Connectors
CABLE ACCESSORIES
Items above with (-) in the codes column are available on special request.
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.134 VOLTEX CATALOGUE
Mini Reels
Pre - Packs
HEAT SHRINK
Commericial Grade Polyolefin
Is ideal for providing insulation of electrical connections, terminals, components and wiring systems. It requires a minimum shrink temperature of 120°C and is well suited to manual as well as automatic methods of application. Is very suitable for use as a continuous insulation sleeve in a variety of industrial applications.
Note:• All dimensions in mm except for quantity in metre (m).• Subject to technical changes.• Colours available: Black, Red, Blue, White, Yellow, Green/Yellow, Clear (Clear is not Self Extinguishing)
Model Supplied Recov. Wall (WT)
Product Code
Colour
Ø D Ø D nom. Black
CP24R 2.4 1.2 0.5 H683
CP32R 3.2 1.6 0.5 H685
CP48R 4.8 2.4 0.5 H687
CP64R 6.4 3.2 0.6 H689
CP95R 9.5 4.8 0.6 H691
CP127R 12.7 6.4 0.6 H693
CP190R 19.0 9.5 0.8 H695
CP254R 25.4 12.7 0.9 H697
Material Data
Type Commercial Grade Polyolefin
Shrink Ratio 2:1
Longitudinal Change after Shrinkage .max %-5
(Minimum Shrink Temperature (Metric +120°C
Operating Temperature -55°C to +135°C
(Dielectric Strength (metric 25kV/mm
Flammability Flame retardant except for clear
Model Supplied Recov. Wall (WT)
Product Code
Colours
Ø D Ø D nom. Red Blue Yellow Black White
CP24P 2.4 1.2 0.5 H643 - H642 H6314 H641 H644
CP32P 3.2 1.6 0.5 H647 - H646 H6157 H645 H648
CP48P 4.8 2.4 0.5 H651 - H650 - H649 H652
CP64P 6.4 3.2 0.6 H655 - H654 H7429 H653 H656
CP95P 9.5 4.8 0.6 H659 - H658 - H657 H660
CP127P 12.7 6.4 0.6 H663 - H662 - H692 H664
CP190P 19.0 9.5 0.8 H667 - H666 H6930 H694 H668
CP254P 25.4 12.7 0.9 H671 - H670 - H696 H672
CPPKITBK 2.4 - 4.8 x 10 each / 6.4 - 25.4 x 5 each - (Black) - - - - H10416 -
CPPKITCOL 2.4 - 12.7 x 5 each / 19.0 - 25.4 x 2 each - (Std Colours) H10417
Green
Yellow
CABLE ACCESSORIES
Items above with (-) in the codes column are available on special request.
3VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. 135VOLTEX CATALOGUE
PUTTY
Cable Compound Putty
Technical Data
Type Description Product Code
• B.I.C.C• 500gPack H68
CABLE ACCESSORIES
CABLE CLIPS
TypeDescription and Size
Product Code(mm)
FlatWhite
5.0 K804
8.5 K805
10.5 K806
12.5 K807
14.5 K808
RoundWhite
03 K809
04 K810
05 K811
06 K812
07 K813
08 K815
09 K817
10 K819
11 K821
12 K823
14 K824
20 K25
22 K825
Black08 K814
09 K816
10 K818
11 K820
12 K822
2 VOLTEX CATALOGUEFor extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.136 VOLTEX CATALOGUE
GROMMETS, PLUGS AND STRIPS
PVC Beading Edge Protection Strip
Features and BenefitsManufactured from a flexible PVC compound which ensures ease of use. Can be used to protect cables from chafing on bulkheads.
ApplicationPVC Beading strip is used to protect cables routed through sharp-edged cutout sections. It can also be used to provide an attractive finish to panel edges.
Technical Data
TypeWidth Width Width Width Width Height
Product Code(mm) (mm) (mm) (mm) (mm) (mm)(W) (W2) (W3) (W4) (H) (H2)
SM1 5.0 1.0 1.8 4.2 6.3 4.9 H10462
RA1 6.4 2.4 - - 7.1 5.6 H10463
PS1 1.2 0.6 - - 5.0 3.15 H10464
Material Data
Material (Flexible Polyvinyl Chloride, cadmium free (PVC
Colour (Black (BK
Operating Temperature
-65°C to +105°C
Flammability Self extinguishing
Note:• For full range of grommets, plugs and strips enquire at your nearest branch.
WE ALSO STOCK A WIDE RANGE OF EDGE PROTECTION GROMMETS.
Features and BenefitsHellermannTyton edge protection grommets, made of cadmium-free, flexible PVC or Polyethylene, come in a wide range of shapes and sizes. They are resistant to various minerals and environmental effects.
ApplicationEdge protection grommets are used wherever cable and wires are routed through outlets and apertures. Grommets offer excellent mechanical protection.
CABLE ACCESSORIES