ca netmaster 12.1 ca rs 1406 service list · ca rs 1406 service list ... rsubelement, raddress,...

CA NetMaster 12.1 1

CA RS 1406 Service ListCA NetMaster 12.1 1

CA RS 1406 Service List

Release Service Description Type

12.1 RO67455 IST MESSAGES HAVE EXTRA BLANKS PTF

RO67890 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF

RO67995 NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38 PTF

RO68205 IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING PTF

RO69114 URCALL09 VFS FILE ERROR. ACTION=PUT PTF

RO69117 RTP PIPE ARBMODE RED ALERT NOT CLEARED PTF

RO69387 DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA PTF

RO69440 TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE PTF

RO69518 CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY PTF

RO69535 COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE PTF

RO69565 NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS PTF

RO69768 $$SYSPRO PMON COMMAND IS MISSING REPORTS PTF

RO69904 UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED PTF

RO69983 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF



RO70163 NO DATA SHOWN FOR RESOURCES IN RECOVERY PTF

RO70450 OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY PTF

The CA RS 1406 service count for this release is 18

CA NetMaster 12.0 2

CA RS 1406 Service ListCA NetMaster 12.0 2

CA RS 1406 Service List

Release Service Description Type

12.0 RO70391 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF

The CA RS 1406 service count for this release is 1

CA NetMaster 3

CA RS 1406 Service List for CC11C10CA NetMaster 3

CA RS 1406 Service List for CC11C10

FMID Service Description Type

CC11C10 RO68205 IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING PTF

RO69117 RTP PIPE ARBMODE RED ALERT NOT CLEARED PTF

RO69440 TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE PTF

RO69518 CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY PTF


RO70450 OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY PTF

The CA RS 1406 service count for this FMID is 6

CA NetMaster 4




CC17C10 RO69984 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF


CA NetMaster 5




CC18C10 RO67455 IST MESSAGES HAVE EXTRA BLANKS PTF

RO69565 NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS PTF

RO70163 NO DATA SHOWN FOR RESOURCES IN RECOVERY PTF


CA NetMaster 6

CA RS 1406 Service List for CC2D660CA NetMaster 6

CA RS 1406 Service List for CC2D660


CC2D660 RO70391 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF


CA NetMaster 7

CA RS 1406 Service List for CC2D76RCA NetMaster 7

CA RS 1406 Service List for CC2D76R


CC2D76R RO69387 DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA PTF


CA NetMaster 8

CA RS 1406 Service List for CC2D760CA NetMaster 8

CA RS 1406 Service List for CC2D760


CC2D760 RO67890 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF

RO67995 NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38 PTF

RO69114 URCALL09 VFS FILE ERROR. ACTION=PUT PTF

RO69535 COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE PTF

RO69768 $$SYSPRO PMON COMMAND IS MISSING REPORTS PTF

RO69904 UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED PTF



CA NetMaster 12.1 9

CA RS 1406 - PTF RO67455 DetailsCA NetMaster 12.1 9

CA RS 1406 - PTF RO67455 Details

Release Service Details12.1 RO67455 RO67455 M.C.S. ENTRIES = ++PTF (RO67455)

IST MESSAGES HAVE EXTRA BLANKS

PROBLEM DESCRIPTION:

IST messages processed by PPOPROC that have multiple blanks in the

message text are not correctly processed by AOM.

SYMPTOMS:

TGPU and ADJCP resources are not updated to reflect the current status

when VTAM messages are issued to indicate the status has changed.

IMPACT:

Network resources do not show the correct status.

CIRCUMVENTION:

Issue a check against the resource to refresh the status.

PRODUCT(S) AFFECTED:

CA NetMaster Network Automation r12.1

Star Problem(s):

NMAUTO 269

Copyright (C) 2014 CA. All rights reserved. R00234-NMS076-SP1

DESC(IST MESSAGES HAVE EXTRA BLANKS).

++VER (Z038)

FMID (CC18C10)

SUP ( TR67455 )

CA NetMaster 12.1 10




UPDATE ACCESS REQUESTED TO READ ONLY DATASETS


When modifying any of the FILES category of Parameter Groups, UPDATE

access is required for all datasets, including those that are

designated as read only.

SYMPTOMS:

When updating any of the FILES Parameter Groups, messages similar to

the below are displayed on the Operating System log.

ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.MODSDIS,N/A

ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.PANLDIS,N/A

ICH70004I USER(NETM) GROUP(NETMASTR) NAME(NETMASTR) ATTEMPTED

'UPDATE' ACCESS OF ENTITY 'hlq.MODSDIS' IN CLASS

'FACILITY' AT hh:mm:ss ON month day, year

IMPACT:

Users are unable to update FILES parameter groups without generating

security violations.

CIRCUMVENTION:

Modify the security profile of the NetMaster userid to have UPDATE

authority for the affected datasets.


CA NetMaster Network Management for TCP/IP r12.1

CA NetMaster Network Management for SNA r12.1

CA NetMaster File Transfer Management r12.1






CA SOLVE:Operations Automation r11.9

CA SOLVE:Operations Automation for CICS r11.9

CA SOLVE:Access Session Management r5.0

Star Problem(s):

NMS 1859


DESC(UPDATE ACCESS REQUESTED TO READ ONLY DATASETS).

++VER (Z038)

FMID (CC2D760)

SUP ( RO51429 RO54519 TR51429 TR54519 TR67890 )





NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38


WebCenter HTTP processing terminates when another product such as a

port scanner detects a TCP/IP listener port and opens a connection.

SYMPTOMS:

When using a port scanner against the WebCenter port that is configured

to utilize SSL the following messages are seen in the Activity Log:

NM3040 NCLID nnnnnn: $W3SV11H 744 ERROR 38

NM3042 ERROR INFORMATION...

NM3050 ERROR-CODE: 38

NM3051 MESSAGE: NM4011 VARIABLE NAME IS INVALID: CONTAINS INVALID

NM3052 COND-NAME: VARIABLE_ERROR

NM3053 ERROR-LOC: $W3SV11H 744/10

NM3054 PROCEDURE: $W3SV11H

NM3055 SOURCE: IF &&TEMP ^= '' THEN

NM3060 SUBNAME: GLBL$W3REDIRHTTP:__QUALYS_NULL_

IMPACT:

OML Procedure terminates.

CIRCUMVENTION:

None



Star Problem(s):

NMS 1866


DESC(NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38) .

++VER (Z038)

FMID (CC2D760)

PRE ( RO55387 RO56669 RO64219 )

SUP ( TR67995 )





IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING


When the IPLOG is resized as part of the automatic delete and reorg

process, a new IPLOG fails to be created if the file size exceeds the

4GB VSAM file limit.

SYMPTOMS:

IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING RETURN CODE 140

REASON CODE 110

This message is generated and logged in the NetMaster activity log.

IMPACT:

IPLOG functions terminate and no logging of connections are

performed to the IPLOG.

CIRCUMVENTION:

None.








Star Problem(s):

NMTIP 5108


DESC(IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING).

++VER (Z038)

FMID (CC11C10)

SUP ( TR68205 )





URCALL09 VFS FILE ERROR. ACTION=PUT


TCP/IP Management Data is not sent to ReportCenter because

the Parameter group $WR REPORTDATA fails to complete successfully.

SYMPTOMS:

The Parameter group $WR REPORTDATA has a status of Failed during

initialization and the following message is seen in the activity log:

URCALL09 VFS file error. Action=PUT-$URDRC$JAVATASK1 FileRC=8/14 MSG=

IMPACT:

The ReportCenter server is not started and no new data is collected.

CIRCUMVENTION:

Manually action the $WR REPORTDATA parameter group.



Star Problem(s):

NMS 1874


DESC(URCALL09 VFS FILE ERROR. ACTION=PUT).

++VER (Z038)

FMID (CC2D760)

SUP ( TR69114 )





RTP PIPE ARBMODE RED ALERT NOT CLEARED


Alerts from Event Detector RTPRED5M for RTP ARBMODE RED are not cleared

when the ARBMODE RED condition has cleared. The PROCESSRTPCLEAR routine

in monitor task $IPPM53Z does not determine the CPNAME and thus uses the

last value set which can be incorrect.

SYMPTOMS:

Alerts for "RTP Pipe ARBmode RED >5m" are not cleared when the ARBMODE

is no longer red.

IMPACT:

Alerts give an incorrect indication of ARBMODE RED condition.

CIRCUMVENTION:

None






Star Problem(s):

NMTIP 5060


DESC(RTP PIPE ARBMODE RED ALERT NOT CLEARED).

++VER (Z038)

FMID (CC11C10)

PRE ( RO51529 RO62460 )

SUP ( RO51114 TR51114 TR69117 )





DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA


The Netmaster ReportCenter Data Warehouse Resource Status Report fails

when DB2 is run with DECIMAL=COMMA.

SYMPTOMS:

When generating the Data Warehouse Resource Status Report the following

error occurs when processing section 8, subsection 1 of the report:

com.ibm.db2.jcc.am.SqlSyntaxErrorException: Ýjcc¨Ý50053¨Ý12311¨Ý3.65.96¨

T2zOS exception:

Ýjcc¨ÝT2zos¨T2zosStatement.readPrepareDescribeOutput_:nativePrepareInto:

1582: DB2 engine SQL error, SQLCODE = -104, SQLSTATE = 42601, error

tokens = ,3;AT MICROSECONDS MICROSECOND SECONDS SECOND MINUTES MINUTE

HOURS ERRORCODE=-104, SQLSTATE=42601 SQL code: -104, SQL state: 42601

Ýjcc¨Ý50053¨Ý12311¨Ý3.65.96¨ T2zOS exception:

Ýjcc¨ÝT2zos¨T2zosStatement.readOpenQueryInternal:nativeOpen:8542: DB2

engine SQL error, SQLCODE = -514, SQLSTATE = 26501, error tokens =

SQL_CURLH100C3 ERRORCODE=-514, SQLSTATE=26501

Query text: select distinct rlevel0, rlevel1, rIdentifier, rRelated1,

rSubelement, rAddress, paName , NETM.resource.resource from

NETM.resource, NETM.performanceagent where NETM.resource.rclass =

'IPOSAM' and NETM.resource.rperformanceagent =

NETM.performanceagent.performanceagent order by 1,2,3,4,5,6,7,8

IMPACT:

The Data Warehouse Resource Status Report is not available.

CIRCUMVENTION:

None.





Star Problem(s):

NMS 1879


DESC(DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA) .

++VER (Z038)

FMID (CC2D76R)

SUP ( TR69387 )

TEXT

LINK('../nm/reporter/wr76/reports/definitions/DWSR

esStat.xml')

PARM(PATHMODE(0,6,6,4)) .





TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE


When a local and remote system stack have the same name, a TRS

command issued against the remote stack obtains the interface

results from the local stack.

SYMPTOMS:

A TRS command issued against a remote stack displays the local stack

interface data.

IMPACT:

No remote stack interface data can be viewed.

CIRCUMVENTION:

None.



Star Problem(s):

NMTIP 5217


DESC(TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE).

++VER (Z038)

FMID (CC11C10)

PRE ( RO51922 RO55386 RO56668 RO57250 RO67473 )

SUP ( TR69440 )





CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY


Chorus Software Manager (CSM) Software Configuration Service fails

during NetMaster NM for TCP/IP implementation.

The runtime EXEC library does not have sufficient directory blocks

allocated to cater for the copy step, and the failure information

is overwritten by concurrently running steps.

SYMPTOMS:

The copy to runtime EXEC library step has a status of FAILED.

IMPACT:

NetMaster NM for TCP/IP cannot be implemented using the

Software Configuration Service.

CIRCUMVENTION:

Execute the creation of the runtime EXEC library using the SET MANUAL

option and then create the library with the required size outside of

Chorus Software Manager.


CA NetMaster Network Mgmt For TCP/IP Release 12.1

Star Problem(s):

NMTIP 5219


DESC(CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY) .

++VER (Z038)

FMID (CC11C10)

PRE ( RO52308 RO53359 RO53440 RO54290 )

SUP ( TR69518 )





COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE


When a resource is copied from one system image to another system

image, replacing a resource of the same name, and resource fields have

been modified, the resource on the target system image does not contain

the updated fields.

SYMPTOMS:

A newly copied resource does not contain all of the updated fields.

IMPACT:

Resources are not monitored properly as the resource fields are

incorrect.

CIRCUMVENTION:

The resource must be manually updated before taking effect.





Star Problem(s):

NMS 1881


DESC(COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE) .

++VER (Z038)

FMID (CC2D760)

SUP ( TR69535 )





NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS


When a message triggers Dynamic Discovery the Discovery routine in

$RSDBMS (Network Database Manager) may run at the same time as other

processing for the same resource. The RES-UPDATE routine can be driven

twice for the same state change resulting in a duplicated adjustment of

resource counters.

SYMPTOMS:

The Network Summary display (/SNASUM) has negative or incorrect counts.

IMPACT:

Network Summary counts are not reliable.

CIRCUMVENTION:

None.



Star Problem(s):

NMAUTO 272


DESC(NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS).

++VER (Z038)

FMID (CC18C10)

PRE ( RO68874 )

SUP ( TR67727 TR68059 TR68285 TR68301 TR68656 TR68661

TR68854 TR69565 )





$$SYSPRO PMON COMMAND IS MISSING REPORTS


$$SYSPRO PMON diagnostic command does not wait for the monitor to

finish causing errors on the generated reports.

SYMPTOMS:

$$SYSPRO PMON output contains following error messages:

Performance Monitor Information

N14K30 ##PMON REPORT LAST FAILED - NO REPORTS FOUND.

PMON REPORT TASK=NCL


PMON REPORT TASK=NCL LEVEL=STMT


PMON REPORT LEVEL=CSECT


PMON REPORT LEVEL=USER LIMIT=30


IMPACT:

Diagnosis of PMON related problems cannot be achieved via the $$SYSPRO

PMON command.

CIRCUMVENTION:

Issue ##PMON START command, wait a specified timeframe as provided

by L1 or L2 support, and then issue ##PMON STOP command.






Star Problem(s):

NMS 1882


DESC($$SYSPRO PMON COMMAND IS MISSING REPORTS) .

++VER (Z038)

FMID (CC2D760)

PRE ( RO52149 RO60268 RO64219 )

SUP ( RO66980 TR66980 TR69768 )





UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED


The WebCenter Interface PORT cannot be set to NONE to disable the

use of WebCenter unless PROD=RSS is specified in the RUNSYSIN.

SYMPTOMS:

When updating the $NM WEBCENTER parameter group with the Interface

Port set to NONE a validation error panel is displayed.

The validation panel contains the following information:

Field Description Error Message

Enable RSS Feeds BAIPWI40 Enable RSS Feeds require WebCenter

There is no available option to disable RSS Feeds to avoid this

validation error.

IMPACT:

WebCenter access cannot be disabled by an Administrator.

CIRCUMVENTION:

Specify PROD=RSS in the RUNSYSIN member.




Star Problem(s):

NMS 1875


DESC(UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED).

++VER (Z038)

FMID (CC2D760)

PRE ( RO61458 RO64219 )

SUP ( RO53960 RO65860 TR53960 TR65860 TR69904 )





IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10


Abends occur because insufficient storage is available for the

Initialization Log. Several parameter groups record all activity,

such as daily cleanups and archives, to the Initialization Log.

After many months the Initialization Log can become so large that

not enough storage is available.

SYMPTOMS:

The NetMaster region ABENDs:

IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 NETMSTR NETMSTR 00

IMPACT:

The NetMaster region ABENDs.

CIRCUMVENTION:

None.






Star Problem(s):

NMS 1883


DESC(IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10).

++VER (Z038)

FMID (CC11C10)

SUP ( RO68205 TR68205 TR69983 )

++IF FMID(CC17C10) REQ( RO69984) .

++IF FMID(CC2D760) REQ( RO69985) .












SYMPTOMS:



IMPACT:


CIRCUMVENTION:

None.






Star Problem(s):

NMS 1883



++VER (Z038)

FMID (CC17C10)

SUP ( TR69984 )

++IF FMID(CC2D760) REQ( RO69985) .













SYMPTOMS:



IMPACT:


CIRCUMVENTION:

None.






Star Problem(s):

NMS 1883



++VER (Z038)

FMID (CC2D760)

PRE ( RO68039 )

SUP ( TR69985 )







NO DATA SHOWN FOR RESOURCES IN RECOVERY


On the "Network Summary" display, when the number of "Resources in

Recovery" is greater than zero, selecting that field and pressing

Enter does not present a list of the resources.

SYMPTOMS:

Placing the cursor in the "Resources in Recovery" field and pressing

Enter always returns the message "No Data to Display" regardless

of the number of resources in the "Resources in Recovery" field.

IMPACT:

It is difficult to determine the names and types of resources

currently being recovered.

CIRCUMVENTION:

While in the "Network Summary" display press "F5=Filter" or enter the

Primary Command "Filter" and specify the following criteria to get a

list of the resources currently in recovery:

"(" Field Opr Value

INREC EQ YES



Star Problem(s):

NMAUTO 271


DESC(NO DATA SHOWN FOR RESOURCES IN RECOVERY).

++VER (Z038)

FMID (CC18C10)

SUP ( TR69354 TR70147 TR70163 )





OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY


When OSA devices are defined to a stack as Interfaces rather than

Devices, they are listed as Links on the Device Links List panel.

No commands are available to Activate or Inactivate Links, so these

commands must be entered for the Device Name field. An invalid name

for the Interface is used in the command.

SYMPTOMS:

The wrong name is used when Activating or Inactivating Stack OSA

Interfaces from the Device Name field which results in the command

failing.

IMPACT:

OSA Interfaces cannot be Activated from the Device Links display.

CIRCUMVENTION:

None.



Star Problem(s):

NMTIP 5218


DESC(OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY).

++VER (Z038)

FMID (CC11C10)

PRE ( RO51529 RO52148 RO53296 RO55386 RO56668 RO57250

RO58457 RO60432 RO64218 RO64657 RO69389 )

SUP ( RO50817 RO63768 RO63995 TR50817 TR60269 TR63768

TR63995 TR69332 TR70450 )

++HOLD (RO70450) SYSTEM FMID(CC11C10)

REASON (ACTION ) DATE (14148)

COMMENT (

+----------------------------------------------------------------------+

| CA NetMaster Network Mgmt For TCP/IP Release 12.1 |

+----------+-----------------------------------------------------------+

|SEQUENCE | After Apply. |

+----------+-----------------------------------------------------------+

|PURPOSE | Copy the updated MOD@$IP from the SMP/E target dataset |

| | into the product run-time MODSDIS VSAM dataset. |

+----------+-----------------------------------------------------------+

|USERS | All users. |

|AFFECTED | |

+----------+-----------------------------------------------------------+

|KNOWLEDGE | JCL customization. |

|REQUIRED | |

+----------+-----------------------------------------------------------+

|ACCESS | 1. Target libraries. |

|REQUIRED | 2. Product region MODSDIS VSAM dataset. |

+----------+-----------------------------------------------------------+

**************************

* STEPS TO PERFORM *

**************************

1. Copy the sample JCL below to a dataset.

2. Modify the sample JCL to meet your site's requirements.

3. In the scheduled maintenance window, stop all product regions that

reference the MODSDIS VSAM dataset.

4. Submit the modified JCL to update the product region MODSDIS

VSAM dataset.

5. Start the product regions that were stopped.

//MYUSERV JOB ACCT,CLASS=A,MSGCLASS=X,NOTIFY=&SYSUID

//NMVIP EXEC PGM=NMVIP

//STEPLIB DD DISP=SHR,DSN=&TGTPREF.CC2DLOAD

//MODSIN DD DISP=SHR,DSN=&TGTPREF.CC11VSMI(MOD@$IP)



Release Service Details//MODSOUT DD DISP=SHR,DSN=&DSNPREF.MODSDIS

//SYSPRINT DD SYSOUT=*

//SYSIN DD *

COPY MODS INDD=MODSIN OUTDD=MODSOUT OPT=INSTALL

//*

).





DESC (UPDATE ACCESS REQUESTED TO READ ONLY DATASETS)

/*


When modifying any of the FILES category of Parameter Groups, UPDATE

access is required for all datasets, including those that are

designated as read only.

SYMPTOMS:

When updating any of the FILES Parameter Groups, messages similar to

the below are displayed on the Operating System log.

ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.MODSDIS,N/A

ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.PANLDIS,N/A

ICH70004I USER(NETM) GROUP(NETMASTR) NAME(NETMASTR) ATTEMPTED

'UPDATE' ACCESS OF ENTITY 'hlq.MODSDIS' IN CLASS

'FACILITY' AT hh:mm:ss ON month day, year

IMPACT:

Users are unable to update FILES parameter groups without generating

security violations.

CIRCUMVENTION:

Modify the security profile of the NetMaster userid to have UPDATE

authority for the affected datasets.










CA SOLVE:Operations Automation r11.9

CA SOLVE:Operations Automation for CICS r11.9

CA SOLVE:Access Session Management r5.0

*/ .

++VER(Z038) FMID(CC2D660)

PRE(RO33420 RO55497)

SUP(TZ58293) .

++IF FMID(CC2D660) THEN REQ(RO25810) .

ca netmaster 12.1 ca rs 1406 service list · ca rs 1406 service list ... rsubelement, raddress,...

Documents