c2 compression latch · lever latch l ock stylel 1 1non-locking raised trigger 2 5key-locking...
TRANSCRIPT
106
ACTUAL SIZE
41(1.61)
34(1.34)
Trigger
Lever16 (.63)
Optionalkeylock or tool access (available with raised trigger only)
93(3.66)
Lever inraised(open)
position
M5adjusting screws
*Serrated Mounting Screw M5 x 16
Mounting bracket
Housing
Door Thickness1 (.04) Minimum -5 (.20) Maximum
22 (.87)
A
Jam nut
Bwhen adjusted
to maximum grip
Raised trigger(flush version
available)
Gasket
Frame
5 (.20)Min.
11 (.43)Max.
25±1 (.98±.04)
86±1(3.38±.04)
Door
R 3 (.12)Max.
Part Number Selection _______________________________________________________________________________See table
Other options available. For complete details on variety, part numbers, installation and
specification, go to
Dimensions in millimeters (inch) unless otherwise stated
C2 Compression LatchLever latch
L Lock style1 Non-locking raised trigger2 Key-locking raised trigger keyed CH751 (two flat keys supplied)3 Flush trigger non-locking4 4 (.16) Hex recess raised trigger10 No. 2 Phillips raised trigger13 Locking without lock core
(see page 158 for lock core options)14 Railway standard
F Finish1 Textured chrome 5 Black powder coated
P Packaging option3 Latches are sold layer
packed Omit for individually packaged latches.
C2 - S G - L F - P
www.southco.com/C2
G Grip Range A B
2 1 - 24 (.04 - .95) 35 (1.38) 63 (2.48)
3 23 - 46 (.91 - 1.81) 57 (2.24) 84 (3.31)
L Lock Styles
Key-locking 4 (.16) No. 2 Phillips Railway keyed CH751 Hex recess recess Standard
• Low profile when latched• Easy grip adjustment• Push button actuation• Optional Sealing
Material and FinishZinc alloy, powder coated or chrome plated and steel, zinc plated
Performance DetailsMaximum static load: 200 N (45 lbf)
Sealing NotesFor sealed option, NEMA 4 / IP65 sealing is achieved by using the supplied flange gasket.
Installation Notes* For door thickness greater than5 (.20) calculate screw length usingthe following formula:Door thickness + 12 (.47)
AccessoriesRubber Bumper: Part Number: C2-25-301-82 (reduces min. and max. grip by 1.6 (0.06) )
KeysSee page 90
S Sealing Option3 Non-sealed 4 Sealed
Lever inraised(open)
position
Door Thickness1 (.04) Minimum -8 (.32) Maximum
22(.87)
50˚
sealed C2
Bwhen adjusted
to maximum grip
C2 Non-Sealed C2 Sealed
NotesFor lock core selection and a complete overview of the SOUTHCO® Key-Choice System see www.southco.com
106A
Other options available. For complete details on variety, part numbers, installation and specification, go to
___________________________________________________________________________ Part Number Selection See table
Other options available. For complete details on variety, part numbers, installation and specification, go to
• Visual access status• Easy grip adjustment• Push button actuation• Integrated bumper screw
Material and FinishZinc alloy, powder coated or chrome plated and steel, zinc plated
Performance DetailsMaximum static load: 200 N (45 lbf)
Sealing NotesNEMA 4 and IP65 enabled using supplied gasket.
Installation Notes* For door thickness greater than 5 (.20) calculate screw length using the following formula: Door thickness + 12 (.47)
Indicator Reset KeyPart number: C2-26-301-05
C2 Compression LatchLever latch · Access indicator
www.southco.com/A7
ACTUAL SIZE
Dimensions in millimeters (inch) unless otherwise stated
41.1(1.62)
34(1.33)
93(3.66)
17.7(.7)
22 (.87)1 (.04) Min.8(.32) Max.
55º
www.southco.com/A7
NotesFor lock core selection and a complete overview of the SOUTHCO® Key-Choice System see www.southco.com
L Lock style1 Non-locking raised trigger2 Key-locking raised trigger keyed CH751 (two flat keys supplied)3 Flush trigger non-locking4 4 (.16) Hex recess raised trigger10 No. 2 Phillips raised trigger13 Locking without lock core (see page 158 for lock core options)14 Railway standard
F Finish1 Textured chrome 5 Black powder coated
P Packaging option3 Latches are sold layer
packed Omit for individually packaged latches.C2 - A4 G - L F - P
G Grip Range A B
2 1 - 18 (.04 - .71) 35 (1.38) 65 (2.56)
3 17 - 39 (.67 - 1.53) 57 (2.24) 85 (3.35)
5 (.20) Min.11 (.43) Max.
25 ±1(.98 ±.04) R3 (.12) Max.
86 ±1(3.39 ±.04)
41.1(1.62)
34(1.33)
93(3.66)
17.7(.7)
22 (.87)1 (.04) Min.8(.32) Max.
55º
Bwhen adjusted
to maximum grip
A
L Lock Styles
Key-lockingkeyed CH751
4 (.16)Hex recss
No. 2 Phillips recess
RailwayStandard
SlottedRecess
Access IndicatorGreen – UnaccessedRed – Accessed (Operated)
Panel PreparationG Grip range
Optional key lock or tool access (available with raised trigger only)