c13-cat-v5r20

8/8/2019 c13-cat-v5r20

1/56

Chapter 13

Prepared by : Shivkumar Gummadi

Start new files in the Drafting workbench. Generate views using the View Creation Wizard.

Generate front views.

Generate advanced front views.

Generate projection views.

Generate auxiliary views.

Generate isometric views. Generate section views.

Generate aligned section views.

Generate offset section cuts.

Generate aligned section cuts.

Generate detail views.

Generate detail view profiles. Generate clipping views.

Generate clipping view profiles.

Generate broken views.

Learning Objectives

8/8/2019 c13-cat-v5r20

2/56

Chapter 13


Generate breakout views.

Edit and modify drawing views. Modify hatch patterns of section views.

8/8/2019 c13-cat-v5r20

3/56

Chapter 13


THE DRAFTING WORKBENCH

A specialized environment for generating 2D drawing viewsProvides all the tools required to generate drawing views, modify, and

apply dimensions and annotations to them

Starting a New File in the Drafting Workbench

Starting a New File in the Drafting Workbench Using the New Tool

Menu: File > New

Toolbar:Standard > New

8/8/2019 c13-cat-v5r20

4/56

Chapter 13


The New Drawing dialog box

8/8/2019 c13-cat-v5r20

5/56

Chapter 13


T e i iti l scr een fter st rting new file in theDr fti work ench

8/8/2019 c13-cat-v5r20

6/56

Chapter 13


Starting a New File in the Drafting Workbench Using the Start Menu

Menu: Start > Mechanical Design > Drafting

The New Drawing Creation dialog box

8/8/2019 c13-cat-v5r20

7/56

Chapter 13


TYPE OF VIEWS

Front View

Projected View

Section View

Aligned Section View

Auxiliary View

Detail View

Clipping View

Broken ViewBreakout View

8/8/2019 c13-cat-v5r20

8/56

Chapter 13


GENERATING DRAWING VIEWS

Generating Views Automatically

Tools in the Wizard drop-down

8/8/2019 c13-cat-v5r20

9/56

Chapter 13


Generating Views Using the View Creation Wizard

Menu: Insert > Views > Wizard > WizardToolbar: Views > Wizard drop-down > View Creation Wizard

The View Wizard dialog box

8/8/2019 c13-cat-v5r20

10/56

Chapter 13


Preview of the front view at the lower-right corner of the

geometry area

8/8/2019 c13-cat-v5r20

11/56

Chapter 13


Controls provided on the blue knob

8/8/2019 c13-cat-v5r20

12/56

Chapter 13


Views generated using the View Wizard dialog box

8/8/2019 c13-cat-v5r20

13/56

Chapter 13


Generating the Front, Top, and Left Views

Menu: Insert > Views > Wizard > First ConfigToolbar: Views > Wizard drop-down > Front, Top and Left

Generating the Front, Bottom, and Right Views

Menu: Insert > Views > Wizard > Second Config

Toolbar: Views > Wizard drop-down > Front, Bottom and Right

Generating All Views

Menu: Insert > Views > Wizard > Third Config

Toolbar: Views > Wizard drop-down > All Views

8/8/2019 c13-cat-v5r20

14/56

Chapter 13


Generating Individual Drawing Views

Generating the Front View

Menu: Insert > Views > Projections > Front View

Toolbar: Views > Projections drop-down > Front View

Tools in the Projections drop-down

8/8/2019 c13-cat-v5r20

15/56

Chapter 13


The front view generated using the Front View tool

8/8/2019 c13-cat-v5r20

16/56

Chapter 13


Generating the Advanced Front View

Menu: Insert > Views > Projections > Advanced Front ViewToolbar: Views > Projections drop-down > Advanced Front View

The View Parameters

dialog box

The front view generated using the

Advanced Front View tool

8/8/2019 c13-cat-v5r20

17/56

Chapter 13


Generating Projection Views

Menu: Insert > Views > Projections > ProjectionToolbar: Views > Projections drop-down > Projection View

Projected view (Top view) generated from the front view using the

Projection View tool

8/8/2019 c13-cat-v5r20

18/56

Chapter 13


Generating Auxiliary Views

Menu: Insert > Views > Projections > AuxiliaryToolbar: Views > Projections drop-down > Auxiliary View

Reference to be selected for generating the auxiliary view

8/8/2019 c13-cat-v5r20

19/56

Chapter 13


Auxiliary view placed below the parent

view (Front View)

Auxiliary view placed above the parent

view (Front View)

8/8/2019 c13-cat-v5r20

20/56

Chapter 13


Generating Isometric Views

Menu: Insert > Views > Projections > IsometricToolbar: Views > Projections drop-down > Isometric View

Isometric view generated using the Isometric View tool

8/8/2019 c13-cat-v5r20

21/56

Chapter 13


Generating Offset Section Views

Menu: Insert > Views > Sections > Offset Section ViewToolbar: Views > Sections drop-down > Offset Section View

Full section view Offset section view

8/8/2019 c13-cat-v5r20

22/56

Chapter 13


The Sections drop-downHalf section view

8/8/2019 c13-cat-v5r20

23/56

Chapter 13


Creating the Partial Section View

The partial section view

8/8/2019 c13-cat-v5r20

24/56

Chapter 13


Generating Aligned Section Views

Menu: Insert > Views > Sections > Aligned Section ViewToolbar: Views > Sections drop-down > Aligned Section View

Aligned section view

8/8/2019 c13-cat-v5r20

25/56

Chapter 13


Aligned section view with the

inclined line drawn first

Aligned section view with the

vertical line drawn first

8/8/2019 c13-cat-v5r20

26/56

Chapter 13


Generating the Offset Section Cut

Menu: Insert > Views > Sections > Offset Section CutToolbar: Views > Sections drop-down > Offset Section Cut

Offset section cut

8/8/2019 c13-cat-v5r20

27/56

Chapter 13


Generating the Aligned Section Cut

Menu: Insert > Views > Sections > Aligned Section CutToolbar: Views > Sections drop-down > Aligned Section Cut

Aligned section cut

8/8/2019 c13-cat-v5r20

28/56

Chapter 13


Generating Detail Views

Menu: Insert > Views > Details > DetailToolbar: Views > Details drop-down > Detail View

Detail viewThe Details drop-down

8/8/2019 c13-cat-v5r20

29/56

Chapter 13


Generating Detail View Profiles

Menu: Insert > Views > Details > Sketched Detail ProfileToolbar: Views > Details drop-down > Detail View Profile

Detail view profile

8/8/2019 c13-cat-v5r20

30/56

Chapter 13


Generating Clipping Views

Menu: Insert > Views > Clippings > ClippingToolbar: Views > Clippings drop-down > Clipping View

Clipping viewThe Clippings drop-down

8/8/2019 c13-cat-v5r20

31/56

Chapter 13


Generating Clipping View Profiles

Menu: Insert > Views > Clippings > Sketched Clipping ProfileToolbar: Views > Clippings drop-down > Clipping View Profile

Clipping view profile

8/8/2019 c13-cat-v5r20

32/56

Chapter 13


Generating Broken Views

Menu: Insert > Views > Break view > Broken ViewToolbar: Views > Break view drop-down > Broken View

The Break view toolbar

The front view that needs to be

brokenResulting broken view

8/8/2019 c13-cat-v5r20

33/56

Chapter 13


A broken isometric view Zigzag broken lines

8/8/2019 c13-cat-v5r20

34/56

Chapter 13


Generating Breakout Views

Menu: Insert > Views > Break view > Breakout ViewToolbar: Views > Break view drop-down > Breakout View

Polygon profile drawn to generate the

Breakout view

8/8/2019 c13-cat-v5r20

35/56

Chapter 13


The 3D i rwindow

8/8/2019 c13-cat-v5r20

36/56

Chapter 13


GENERATINGTHEEXPLODED VIEW

EDITINGAND MODIFYING DRAWING VIEWS

Changing the Scale of Drawing Views

Modifying the Project Plane of the Parent View

Deleting Drawing Views

Rotating Drawing Views

Hiding Drawing Views

8/8/2019 c13-cat-v5r20

37/56

Chapter 13


MODIFYINGTHEHATCH PATTERN OF SECTION VIEWS

Figure 44 The Properties dialog box

8/8/2019 c13-cat-v5r20

38/56

Chapter 13


TUTORIAL 1

In this tutorial, you will generate the drawing views of the model of the Motor Covercreated in tutorial 2 of chapter 8, refer to Figure A.

Figure A Drawing views to be generated

8/8/2019 c13-cat-v5r20

39/56

Chapter 13


The following steps are required to complete this tutorial:

1. Copy the part document ofTutorial 2 of Chapter 8 to the folder of the current chapter.

2. Start a new file in the Drafting workbench with the standard A4 sheet size.

3. Set the projection standard to third angle.

4. Generate the front view, refer to Figure B.

8/8/2019 c13-cat-v5r20

40/56

Chapter 13


Figure B The drawing sheet after generating the front view

8/8/2019 c13-cat-v5r20

41/56

8/8/2019 c13-cat-v5r20

42/56

Chapter 13


6. Generate the aligned section view from the top view after activating it, refer to

Figures D and E.

Figure D Sketch for the section lines

8/8/2019 c13-cat-v5r20

43/56

Chapter 13


Figure EThe drawing sheet after generating the aligned section view

8/8/2019 c13-cat-v5r20

44/56

Chapter 13


7. Generate the detail view, refer to Figures F and G.

Figure F Sketch for the detail view

8/8/2019 c13-cat-v5r20

45/56

Chapter 13


TUTORIAL 2

In this tutorial, you will create the Bench Viceassembly and then generate the front, top,

right, and isometric views of the Bench Vice

assembly, as shown in Figure A. Figures B

through E show the views and dimensions of

the components of the Bench Vice assembly

Figure A Drawing view of the

Bench Vice assembly

8/8/2019 c13-cat-v5r20

46/56

Chapter 13


Orthographic views and dimensions of the Vice Jaw

8/8/2019 c13-cat-v5r20

47/56

8/8/2019 c13-cat-v5r20

48/56

Chapter 13


Orthographic views and dimensions of various components of the

Bench Vice assembly

8/8/2019 c13-cat-v5r20

49/56

8/8/2019 c13-cat-v5r20

50/56

Chapter 13


The following steps are required to complete this tutorial:

1. Create all components of the Bench Vice assembly and assemble them.

2. Start a new file in the Drafting workbench using the A2 size sheet.

3. Set the standard of the projection to third angle.

4. Generate the front view, refer to Figure F.

8/8/2019 c13-cat-v5r20

51/56

Chapter 13


Figure F The drawing sheet after generating the front view

8/8/2019 c13-cat-v5r20

52/56

Chapter 13


5. Generate the top view, refer to Figure G.

Figure GThe drawing sheet after generating the top view

8/8/2019 c13-cat-v5r20

53/56

Chapter 13


Figure HThe drawing sheet after generating the right view

6. Generate the right view, refer to Figure H.

8/8/2019 c13-cat-v5r20

54/56

8/8/2019 c13-cat-v5r20

55/56

Chapter 13


Exercise 1

Create the components of the V-Block and generate the front, top, right, detail, andisometric views, as shown in Figure A. The views and dimensions of the components of

the V-Block are shown in Figure B and Figure C.

(Expected time: 1 hr)

Figure A Drawing views of the

V-Block assembly

Figure B Views and dimensions

of the V-Block body

8/8/2019 c13-cat-v5r20

56/56

Chapter 13


Figure C Views and dimensions of theU-Clamp and Fastener

c13-cat-v5r20

Documents