c p s prevent corrosion pecialty lastics orrosion · wear pad specifications nominal pipe outside...
TRANSCRIPT
SPECIALTY PLASTICS, INC.
CORROSION RESISTANT WEAR PADS
SPECIALTY PLASTICS CORROSION RESISTANT WEAR PADS are the
best way to protect your pipes from the damaging effects of corrosion and rust
caused by metal to metal contact. Specifically formulated with a smooth exterior, our ultra smooth composite
wear pads effectively isolate un-insulated pipes from their supports
and prevent corrosion.
SPECIALTY PLASTICS, INC. ONE GREENTREE PLAZA, SUITE 201
MARLTON, NJ 08053-3105 PHONE: (856) 988-5876
FAX: (856) 596-8359 © 2009, SPECIALTY PLASTICS, INC.
NOTES: 1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC. 2. STANDARD LENGTHS OF WEAR PADS ARE 12” AND 14”. OTHER SIZES ARE
AVAILABLE UPON REQUEST. 3. WEAR PADS TO BE CONTACT MOLDED HAND LAY-UP. 4. WEAR PADS MEET ASTM E-84 FLAME SPREAD CLASS 1 RATING.
WEAR PAD SPECS
NOMINAL PIPE OUTSIDE DIAMETER STANDARD ANGLE PAD THICKNESS
1/2” TO 4” 13MM TO 102MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
6” TO 10” 152MM TO 254MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
12” TO 48” 305MM TO 1219MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
PROTECT PIPE
PREVENT CORROSION
ELIMINATE METAL TO METAL CONTACT
ELIMINATE WELDING
ELIMINATE HOT WORK
ELIMINATE HOT WORK PERMITS
COMPRESSIVE STRENGTH (PSI)UP TO 40,000 POUNDS PER SQUARE INCH
OPERATING TEMPERATURE RANGE -67°F (-55°C) TO 350°F (176°C)
ASTM E-84 FLAME SPREAD CLASS 1 RATING
SMOOTH EXTERIOR FINISH
EASY AND QUICK TO INSTALL
SPECIALTY PLASTICS, INC.
CORROSION RESISTANT WEAR PADS
SPECIALTY PLASTICS CORROSION RESISTANT WEAR PADS are the
best way to protect your pipes from the damaging effects of corrosion and rust
caused by metal to metal contact. Specifically formulated with a smooth exterior, our ultra smooth composite
wear pads effectively isolate un-insulated pipes from their supports
and prevent corrosion.
SPECIALTY PLASTICS, INC. ONE GREENTREE PLAZA, SUITE 201
MARLTON, NJ 08053-3105 PHONE: (856) 988-5876
FAX: (856) 596-8359 © 2009, SPECIALTY PLASTICS, INC.
NOTES: 1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC. 2. STANDARD LENGTHS OF WEAR PADS ARE 12” AND 14”. OTHER SIZES ARE
AVAILABLE UPON REQUEST. 3. WEAR PADS TO BE CONTACT MOLDED HAND LAY-UP. 4. WEAR PADS MEET ASTM E-84 FLAME SPREAD CLASS 1 RATING.
WEAR PAD SPECS
NOMINAL PIPE OUTSIDE DIAMETER STANDARD ANGLE PAD THICKNESS
1/2” TO 4” 13MM TO 102MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
6” TO 10” 152MM TO 254MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
12” TO 48” 305MM TO 1219MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
© 2011, Specialty plastics, inc.© 2011, Specialty plastics, inc.
Specialty Plastics, Inc.10000 Lincoln Drive East, Suite 201
Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.
Specialty Plastics, Inc.10000 Lincoln Drive East, Suite 201
Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.
WEAR PAD SPECIFICATIONSNOMINAL PIPE OUTSIDE DIAMETER PAD THICKNESS
STANDARD ANGLEINCHES MILLIMETER INCH MM
6 TO 10 152 TO 254 1/8 TO 3/8 3 TO 10 A, B, C, D1/2 TO 4 13 TO 102 1/8 TO 3/8 3 TO 10 A, B, C, D
1 1 WP 04-0125-D-12 VINYL ESTER FIBERGLASS REINFORCED PLASTIC
12 TO 48 305 TO 1219 1/8 TO 3/8 3 TO 10 A, B, C, D*OTHER SIZES AVAILABLE ON REQUEST*
SAMPLE BILL OF MATERIALSITEM QTY DESCRIPTION MATERIAL
1 SPECIALTY PLASTICS, INC.CHECKED NAME 7/17/2009QA NAME 7/17/2009
REVISION A
DRAWN NAME 7/17/2009SHEET 1 OF
MFG NAME 7/17/2009 ONE GREENTREE PLAZA. SUITE 201
MARLTON, NJ 08053-3105
PHONE: (856) 988-5876
FAX: (856) 596-8359© 2009, SPECIALTY PLASTICS, INC.
APPR. NAME 7/17/2009ADDITIONAL NOTES:
NOTES AND SPECIFICATIONS:1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC.2. TO INSTALL WEAR PADS FOLLOW SPECIALTY PLASTICS
INSTALLATION INSTRUCTIONS.3. OTHER LENGTHS, DEGREES OF COVERAGE AND THICKNESSES
ARE AVAILABLE UPON REQUEST.4. OPERATING TEMP RANGE: -67°F (-55°C) TO 350°F (176°C)5. ASTM E-84 FLAME SPREAD CLASS 1 RATING.6. SMOOTH EXTERIOR FINISH.
WP 04-0125-D-12WEAR PAD
DESIGNATIONNOMINALPIPE OD
WEAR PAD THICKNESSIN DECIMAL INCHES
DEGREE OFPIPE COVERAGE
WEAR PAD LENGTHIN INCHES
HOW TO ORDER:SAMPLE PART NUMBER:
WEAR PAD SPECIFICATIONSNOMINAL PIPE OUTSIDE DIAMETER PAD THICKNESS
STANDARD ANGLEINCHES MILLIMETER INCH MM
6 TO 10 152 TO 254 1/8 TO 3/8 3 TO 10 A, B, C, D1/2 TO 4 13 TO 102 1/8 TO 3/8 3 TO 10 A, B, C, D
1 1 WP 04-0250-C-14 VINYL ESTER FIBERGLASS REINFORCED PLASTIC
*OTHER SIZES AVAILABLE ON REQUEST*SAMPLE BILL OF MATERIALS
ITEM QTY DESCRIPTION MATERIAL
1 SPECIALTY PLASTICS, INC.CHECKED NAME 7/17/2009QA NAME 7/17/2009
REVISION A
DRAWN NAME 7/17/2009SHEET 1 OF
MFG NAME 7/17/2009 ONE GREENTREE PLAZA. SUITE 201
MARLTON, NJ 08053-3105
PHONE: (856) 988-5876
FAX: (856) 596-8359© 2009, SPECIALTY PLASTICS, INC.
APPR. NAME 7/17/2009ADDITIONAL NOTES:
12 TO 48 305 TO 1219 1/8 TO 3/8 3 TO 10 A, B, C, D
NOTES AND SPECIFICATIONS:1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC.2. TO INSTALL WEAR PADS FOLLOW SPECIALTY PLASTICS
INSTALLATION INSTRUCTIONS.3. OTHER LENGTHS, DEGREES OF COVERAGE AND THICKNESSES
ARE AVAILABLE UPON REQUEST.4. OPERATING TEMP RANGE: -67°F (-55°C) TO 350°F (176°C)5. ASTM E-84 FLAME SPREAD CLASS 1 RATING.6. SMOOTH EXTERIOR FINISH.
WP 04-0250-C-14WEAR PAD
DESIGNATIONNOMINALPIPE OD WEAR PAD THICKNESS
IN DECIMAL INCHES
DEGREE OFPIPE COVERAGE
WEAR PAD LENGTHIN INCHES
HOW TO ORDER:SAMPLE PART NUMBER:
© 2011, Specialty plaSticS, inc. © 2011, Specialty plaSticS, inc.
10000 Lincoln Drive East, Suite 201Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.
10000 Lincoln Drive East, Suite 201Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.
WEAR PAD SPECIFICATIONSNOMINAL PIPE OUTSIDE DIAMETER PAD THICKNESS
STANDARD ANGLEINCHES MILLIMETER INCH MM
6 TO 10 152 TO 254 1/8 TO 3/8 3 TO 10 A, B, C, D1/2 TO 4 13 TO 102 1/8 TO 3/8 3 TO 10 A, B, C, D
1 1 WP 04-0125-D-12 VINYL ESTER FIBERGLASS REINFORCED PLASTIC
12 TO 48 305 TO 1219 1/8 TO 3/8 3 TO 10 A, B, C, D*OTHER SIZES AVAILABLE ON REQUEST*
SAMPLE BILL OF MATERIALSITEM QTY DESCRIPTION MATERIAL
1 SPECIALTY PLASTICS, INC.CHECKED NAME 7/17/2009QA NAME 7/17/2009
REVISION A
DRAWN NAME 7/17/2009SHEET 1 OF
MFG NAME 7/17/2009 ONE GREENTREE PLAZA. SUITE 201
MARLTON, NJ 08053-3105
PHONE: (856) 988-5876
FAX: (856) 596-8359© 2009, SPECIALTY PLASTICS, INC.
APPR. NAME 7/17/2009ADDITIONAL NOTES:
NOTES AND SPECIFICATIONS:1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC.2. TO INSTALL WEAR PADS FOLLOW SPECIALTY PLASTICS
INSTALLATION INSTRUCTIONS.3. OTHER LENGTHS, DEGREES OF COVERAGE AND THICKNESSES
ARE AVAILABLE UPON REQUEST.4. OPERATING TEMP RANGE: -67°F (-55°C) TO 350°F (176°C)5. ASTM E-84 FLAME SPREAD CLASS 1 RATING.6. SMOOTH EXTERIOR FINISH.
WP 04-0125-D-12WEAR PAD
DESIGNATIONNOMINALPIPE OD
WEAR PAD THICKNESSIN DECIMAL INCHES
DEGREE OFPIPE COVERAGE
WEAR PAD LENGTHIN INCHES
HOW TO ORDER:SAMPLE PART NUMBER:
WEAR PAD SPECIFICATIONSNOMINAL PIPE OUTSIDE DIAMETER PAD THICKNESS
STANDARD ANGLEINCHES MILLIMETER INCH MM
6 TO 10 152 TO 254 1/8 TO 3/8 3 TO 10 A, B, C, D1/2 TO 4 13 TO 102 1/8 TO 3/8 3 TO 10 A, B, C, D
1 1 WP 04-0250-C-14 VINYL ESTER FIBERGLASS REINFORCED PLASTIC
*OTHER SIZES AVAILABLE ON REQUEST*SAMPLE BILL OF MATERIALS
ITEM QTY DESCRIPTION MATERIAL
1 SPECIALTY PLASTICS, INC.CHECKED NAME 7/17/2009QA NAME 7/17/2009
REVISION A
DRAWN NAME 7/17/2009SHEET 1 OF
MFG NAME 7/17/2009 ONE GREENTREE PLAZA. SUITE 201
MARLTON, NJ 08053-3105
PHONE: (856) 988-5876
FAX: (856) 596-8359© 2009, SPECIALTY PLASTICS, INC.
APPR. NAME 7/17/2009ADDITIONAL NOTES:
12 TO 48 305 TO 1219 1/8 TO 3/8 3 TO 10 A, B, C, D
NOTES AND SPECIFICATIONS:1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC.2. TO INSTALL WEAR PADS FOLLOW SPECIALTY PLASTICS
INSTALLATION INSTRUCTIONS.3. OTHER LENGTHS, DEGREES OF COVERAGE AND THICKNESSES
ARE AVAILABLE UPON REQUEST.4. OPERATING TEMP RANGE: -67°F (-55°C) TO 350°F (176°C)5. ASTM E-84 FLAME SPREAD CLASS 1 RATING.6. SMOOTH EXTERIOR FINISH.
WP 04-0250-C-14WEAR PAD
DESIGNATIONNOMINALPIPE OD WEAR PAD THICKNESS
IN DECIMAL INCHES
DEGREE OFPIPE COVERAGE
WEAR PAD LENGTHIN INCHES
HOW TO ORDER:SAMPLE PART NUMBER:
© 2011, Specialty plaSticS, inc. © 2011, Specialty plaSticS, inc.
10000 Lincoln Drive East, Suite 201Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.
10000 Lincoln Drive East, Suite 201Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.
SPECIALTY PLASTICS, INC.
CORROSION RESISTANT WEAR PADS
SPECIALTY PLASTICS CORROSION RESISTANT WEAR PADS are the
best way to protect your pipes from the damaging effects of corrosion and rust
caused by metal to metal contact. Specifically formulated with a smooth exterior, our ultra smooth composite
wear pads effectively isolate un-insulated pipes from their supports
and prevent corrosion.
SPECIALTY PLASTICS, INC. ONE GREENTREE PLAZA, SUITE 201
MARLTON, NJ 08053-3105 PHONE: (856) 988-5876
FAX: (856) 596-8359 © 2009, SPECIALTY PLASTICS, INC.
NOTES: 1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC. 2. STANDARD LENGTHS OF WEAR PADS ARE 12” AND 14”. OTHER SIZES ARE
AVAILABLE UPON REQUEST. 3. WEAR PADS TO BE CONTACT MOLDED HAND LAY-UP. 4. WEAR PADS MEET ASTM E-84 FLAME SPREAD CLASS 1 RATING.
WEAR PAD SPECS
NOMINAL PIPE OUTSIDE DIAMETER STANDARD ANGLE PAD THICKNESS
1/2” TO 4” 13MM TO 102MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
6” TO 10” 152MM TO 254MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
12” TO 48” 305MM TO 1219MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
PROTECT PIPE
PREVENT CORROSION
ELIMINATE METAL TO METAL CONTACT
ELIMINATE WELDING
ELIMINATE HOT WORK
ELIMINATE HOT WORK PERMITS
COMPRESSIVE STRENGTH (PSI)UP TO 40,000 POUNDS PER SQUARE INCH
OPERATING TEMPERATURE RANGE -67°F (-55°C) TO 350°F (176°C)
ASTM E-84 FLAME SPREAD CLASS 1 RATING
SMOOTH EXTERIOR FINISH
EASY AND QUICK TO INSTALL
SPECIALTY PLASTICS, INC.
CORROSION RESISTANT WEAR PADS
SPECIALTY PLASTICS CORROSION RESISTANT WEAR PADS are the
best way to protect your pipes from the damaging effects of corrosion and rust
caused by metal to metal contact. Specifically formulated with a smooth exterior, our ultra smooth composite
wear pads effectively isolate un-insulated pipes from their supports
and prevent corrosion.
SPECIALTY PLASTICS, INC. ONE GREENTREE PLAZA, SUITE 201
MARLTON, NJ 08053-3105 PHONE: (856) 988-5876
FAX: (856) 596-8359 © 2009, SPECIALTY PLASTICS, INC.
NOTES: 1. WEAR PADS ARE MADE OF VINYL ESTER FIBERGLASS
REINFORCED PLASTIC. 2. STANDARD LENGTHS OF WEAR PADS ARE 12” AND 14”. OTHER SIZES ARE
AVAILABLE UPON REQUEST. 3. WEAR PADS TO BE CONTACT MOLDED HAND LAY-UP. 4. WEAR PADS MEET ASTM E-84 FLAME SPREAD CLASS 1 RATING.
WEAR PAD SPECS
NOMINAL PIPE OUTSIDE DIAMETER STANDARD ANGLE PAD THICKNESS
1/2” TO 4” 13MM TO 102MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
6” TO 10” 152MM TO 254MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
12” TO 48” 305MM TO 1219MM 1/8” TO 3/8” 3MM TO 10MM A,B,C,D
© 2011, Specialty plastics, inc.© 2011, Specialty plastics, inc.
Specialty Plastics, Inc.10000 Lincoln Drive East, Suite 201
Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.
Specialty Plastics, Inc.10000 Lincoln Drive East, Suite 201
Marlton, NJ 08053-3105
tel: 856-988-5876 | fax: 856-596-8359© 2013, Specialty Plastics, Inc.