www.cogne.com

Cogne Acciai Speciali

COGNE ACCIAI SPECIALI at the heart of

Automotive

ACCESSORIES

SPRINGS(I.E: REAR-VIEW MIRRORS,CIGARETTE LIGHTER, ETC.)

TRANSMISSION WIRES(I.E. FOR WINDOWS

AND SLIDING ROOFS)

ENGINE MANAGEMENT

FUEL INJECTORS

ENGINE VALVES

OXYGEN SENSORS FUEL

PUMP THROTTLE SHAFT

RADIATOR

EGR COMPONENTS (BYPASS VALVES)

ENGINE SOLENOIDS

FASTENERS

EXAUSTSYSTEMS

CATALYTIC (WELDING WIRE, WOOL

WIRE, WIRE FOR SUPPORT RINGS AND BARS FOR

FIXING ELEMENTS)

SAFETY

WINDSHIELD WIPERS(SUPPORT WIRE)

AIRBAG(BARS FOR CARTRIDGE AND KNITTED WIRE)

CRUISE CONTROL

ABS AND RIDE CONTROL SOLENOIDS

PRESSURE SENSORS

CAS PRODUCTS FOR AUTOMOTIVE

BRAKINGSYSTEMS

ANTI-LOCK BRAKING SOLENOIDS

Cogne Acciai Speciali is focusing on the Automotive market

significant growth in the automotive Industry’s application of stainless steel long products;

technological developments tied to reducing carbon emissions increasingly require the use of high performance stainless steels;

since 2007 the automotive use of stainless steel long products has doubled and it is forecasted to double again within a few years.

Technological collaboration with our research-driven partners;

Development of high performance steels;

Plant restructuring supported by a 100 year-long history of quality know-how;

Global footprint (the only stainless steel supplier with world-wide locations);

Significant share in premium and technology-driven OEMs.

WE ARE FULLY COMMITTED TO THE AUTO INDUSTRY’S DEMANDS FOR HIGH-PERFORMANCE STAINLESS STEELS

BY OFFERING A GLOBAL FOOTPRINT WITH TAILORED SOLUTIONS

WHERE IS COGNE

IN THE WORLD

PRODUCTION

DISTRIBUTION

CERTIFICATO

CERTIFICATE

Si certifica che il sistema di gestione qualità di:

We hereby certify that the quality management system operated by:

Cogne Acciai Speciali Spa

Fabbricazione di prodotti in acciaio: lingotti e blumi, barre, vergella e filo, fucinati a disegno

Production of steel products: ingots and blooms, bars, rod and wire, forged to

prima emissione:

OUR STAINLESS STEELfor automotive

OUR QUALITYFocused on our customer

CAS Safety Policy:1) Safety management manual2) Prevention policy of relevant accidents and fires3) Plant general rescue plan

Our quality and R&D service has the responsibility of guaranteeing that Cogne products respond to both the most demanding International Standards and to each customer’s individual specifications. Our company is certified according ISO 9001:2008; ISO/TS 16949:2009; ISO14001:2004. Our goal is the continuous improvement of our products, the complete satisfaction of our customers and the constant search for competitive advantage on a global scale. Our search for innovative solutions and the promotion of a customer-orientated Company Culture lead us to develop the following:

• Customer service• Metallurgical process control• Laboratory and testing• Research and Development• Quality Certification• Customer homologation

CERTIFICATE

Alex Stoichitoiu Ing. Claudio Provetti

President of IQNET President of CISQ IQNet Partners**:

AENOR Spain AFNOR Certification France APCER Portugal CCC Cyprus CISQ Italy CQC China CQM China CQS Czech Republic Cro Cert Croatia DQS Holding GmbH Germany FCAV Brazil

FONDONORMA Venezuela ICONTEC Colombia Inspecta Certification Finland INTECO Costa Rica IRAM Argentina JQA Japan KFQ Korea MIRTEC Greece MSZT Hungary Nemko AS Norway NSAI Ireland PCBC Poland

Quality Austria Austria RR Russia SIGE México SII Israel SIQ Slovenia SIRIM QAS International Malaysia SQS Switzerland SRAC Romania TEST St Petersburg Russia TSE Turkey Vinçotte Belgium YUQS Serbia

IQNet is represented in the USA by: AFNOR Certification, CISQ, DQS Holding GmbH and NSAI Inc.

* This attestation is directly linked to the IQNet Partner’s original certificate and shall not be used as a stand-alone document ** The list of IQNet partners is valid at the time of issue of this certificate. Updated information is available under www.iqnet-certification.com

CISQ/IGQ as an IQNet Partner hereby states that the organization:

Cogne Acciai Speciali Spa

Via Paravera, 16 11100 Aosta AO

for the following scope: Production of steel products: ingots and blooms, bars, rod and wire, forged to drawing -

Atomized metallic powders - Foundry sticks - Titanium alloy bars

has implemented and maintains a Quality Management System which fulfils the requirements of the following standard:

ISO 9001:2008 Issued on: 2017-11-27

First issued on: 1992-10-30 for the validity date, please refer to the original certificate* issued by CISQ/IGQ

Registration Number: IT - 0062 IGQ 9223

CERTIFICATO CERTIFICATE

IGQ 9223 Si certifica che il sistema di gestione qualità di:

We hereby certify that the quality management system operated by:

Cogne Acciai Speciali Spa

Via Paravera, 16 11100 Aosta AO

è conforme alla norma e ai requisiti dello schema: is in compliance with the standard and the scheme requirements:

ISO/TS 16949:2009 per le seguenti attività:

for the following activities: IAF: 17

Fabbricazione di barre in acciaio laminate, pelate e rettificate e polveri metalliche atomizzate, destinate al settore automotive

Manufacturing of hot rolled, peeled and ground steel bars and atomized metallic powders, for automotive applications

Essendo stato valutato in accordo alle "Regole per lo schema di certificazione ISO/TS 16949:2002 - Quarta edizione 01-10-2013" Having been assessed in accordance with "ISO/TS 16949:2002 certification scheme rules - Fourth edition 2013-10-01"

Esclusioni ammesse/permitted exclusions:8.3

emissione corrente: last issued on: 2017-11-27

data di scadenza: valid until:

2018-09-14 IGQ Viale Sarca 223 20126 Milano

www.igq.it

CISQ AUTOMOTIVE Piazza Don E. Mapelli 75 20099 Sesto San Giovanni MI

www.cisqautomotive.it

0279817

CERTIFICATO

CERTIFICATE

IGQ 9223

Si certifica che il sistema di gestione qualità di:

We hereby certify that the quality management system operated by:

Cogne Acciai Speciali Spa

Via Paravera, 16

11100 Aosta AO

è conforme alla norma:

is in compliance with the standard:

UNI EN ISO 9001:2008

per le seguenti attività:

for the following activities:

IAF: 17

Fabbricazione di prodotti in acciaio: lingotti e blumi, barre, vergella e filo, fucinati a disegno - Polveri

metalliche atomizzate - Pani da fonderia - Barre in leghe di titanio

Production of steel products: ingots and blooms, bars, rod and wire, forged to drawing - Atomized

metallic powders - Foundry sticks - Titanium alloy bars

prima emissione:

first issued on:

1992-10-30

emissione corrente:

last issued on:

2017-11-27

Il Direttore

Dario Agalbato

data di scadenza:

valid until:

2018-09-14

Data ultima revisione: / Last revision date: 2017-11-27

IGQ - Viale Sarca 223 - 20126 Milano - Italy

www.igq.it - info@igq.it

OUR DASHBOARDQualityº every step of the way

Product defectivity online control

Heat treatment diagram control

High purityMicrocleannesMacrostructure online control

ROLLING& HEAT

TREATMENTMELTING

Peeling Drawing Grinding Magnetic annealing treatment Mechanical characteristic control

Dimensional laser controlMagnatestEddy current testing machineUS testingFinal approval

FINISHING FINALINSPECTION

OUR COGNE ENGINE VALVE STEELS