c mode class
TRANSCRIPT
Clustered Ontap Class
Hector Martinez, 8 years consulting
David Brown, Michico
Josh Sanders, Atlanta IBM
Scott Anctil, EDT,
Suresh Pachiyappan,
Day 5
Stats show Core dump Set diag Set admin Stats Sysstat –x 1 System node run –node <node name> Reallocate measure | start | status
Mroot is now available…
the diffrence between N-blade vs D-blade
What could be the maxim rsize/wsize? To get a file on the B.P. from Hector late
CP: Consistency Points, types of
B: Back-to-Back CPs, bad perf issue
T: timer
: Rubel Khan [email protected]
Dir of OP
Share the soft copy of the book
Only A-sync in C-mode?
8.1.2 to support SMB 3.0
Migrate vFiler beta tool ask Chad
HW Universe app
DNS Load balancing
https://docs.google.com/file/d/0Bx9t1-yJwAlMczZxR2lXN2RWRFE/edit?usp=sharing
login: admin
(cluster setup)
Welcome to the cluster setup wizard.
You can enter the following commands at any time:
"help" or "?" - if you want to have a question clarified,
"back" - if you want to change previously answered questions, and
"exit" or "quit" - if you want to quit the cluster setup wizard.
Any changes you made before quitting will be saved.
You can return to cluster setup at any time by typing "cluster setup".
To accept a default or omit a question, do not enter a value.
Do you want to create a new cluster or join an existing cluster? {create, join}:
create
System Defaults:
Private cluster network ports [e0a,e0b].
Cluster port MTU values will be set to 1500.
Cluster interface IP addresses will be automatically generated.
Do you want to use these defaults? {yes, no} [yes]:
It can take several minutes to create cluster interfaces...
Step 1 of 5: Create a Cluster
You can type "back", "exit", or "help" at any question.
Enter the cluster name: netappu
Enter the cluster base license key: VMZIVZGKWVMADF
Creating cluster netappu
Starting cluster support services .....
Cluster netappu has been created.
Step 2 of 5: Add Feature License Keys
You can type "back", "exit", or "help" at any question.
Enter an additional license key []: BAKJZZGKWVMADF RQQQXZGKWVMADF Z0FNAAHKWVMADF Z0FNAAHKWVMADF NUHYZZGKWVMADF DL0FYZGKWVMADF
BAKJZZGKWVMADF RQQQXZGKWVMADF Z0FNAAHKWVMADF Z0FNAAHKWVMADF NUHYZZGKWVMADF
DL0FYZGKWVMADF is not a valid license key.
User-specified feature license keys for the cluster. Examples of licensed
cluster features are storage network protocols such as CIFS, NFS, and iSCSI.
Obtain keys from your sales or support representative. Enter feature license
keys one at a time. When you finish entering feature license keys press Enter
to continue to the next section.
You can type "back", "exit", or "help" at any question.
Enter an additional license key []: BAKJZZGKWVMADF
NFS License was added.
Enter an additional license key []: RQQQXZGKWVMADF
CIFS License was added.
Enter an additional license key []: Z0FNAAHKWVMADF
Z0FNAAHKWVMADF is not a valid license key.
User-specified feature license keys for the cluster. Examples of licensed
cluster features are storage network protocols such as CIFS, NFS, and iSCSI.
Obtain keys from your sales or support representative. Enter feature license
keys one at a time. When you finish entering feature license keys press Enter
to continue to the next section.
You can type "back", "exit", or "help" at any question.
Enter an additional license key []: ZOFNAAHKWVMADF
iSCSI License was added.
Enter an additional license key []: Z0FNAAHKWVMADF
Z0FNAAHKWVMADF is not a valid license key.
User-specified feature license keys for the cluster. Examples of licensed
cluster features are storage network protocols such as CIFS, NFS, and iSCSI.
Obtain keys from your sales or support representative. Enter feature license
keys one at a time. When you finish entering feature license keys press Enter
to continue to the next section.
You can type "back", "exit", or "help" at any question.
Enter an additional license key []: ZOFNAAHKWVMADF
iSCSI License was added.
Enter an additional license key []: NUHYZZGKWVMADF
SnapMirror Data Protection License was added.
Enter an additional license key []: DL0FYZGKWVMADF
DL0FYZGKWVMADF is not a valid license key.
User-specified feature license keys for the cluster. Examples of licensed
cluster features are storage network protocols such as CIFS, NFS, and iSCSI.
Obtain keys from your sales or support representative. Enter feature license
keys one at a time. When you finish entering feature license keys press Enter
to continue to the next section.
You can type "back", "exit", or "help" at any question.
Enter an additional license key []: DLOFYZGKWVMADF
SnapRestore License was added.
Enter an additional license key []:
Step 3 of 5: Set Up a Vserver for Cluster Administration
You can type "back", "exit", or "help" at any question.
Enter the cluster administrator's (username "admin") password:
Retype the password:
Enter the cluster management interface port [e0c]: e0c
Enter the cluster management interface IP address: 192.168.66.120
Enter the cluster management interface netmask: 255.255.255.0
Enter the cluster management interface default gateway: 192.168.66.2
A cluster management interface on port e0c with IP address 192.168.66.120 has been created. You can use this address to connect to and manage the cluster.
Enter the DNS domain names: netappu.com
Enter the name server IP addresses: 192.168.66.1
DNS lookup for the admin Vserver will use the netappu.com domain.
Step 4 of 5: Configure Storage Failover (SFO)
You can type "back", "exit", or "help" at any question.
SFO is licensed.
SFO will be enabled when the partner joins the cluster.
Step 5 of 5: Set Up the Node
You can type "back", "exit", or "help" at any question.
Where is the controller located []: NetAppU
Enter the node management interface port [e0f]: e0f
Enter the node management interface IP address: 192.168.66.121
Enter the node management interface netmask: 255.255.255.0
Enter the node management interface default gateway: 192.168.66.2
A node management interface on port e0f with IP address 192.168.66.121 has been created.
Cluster setup is now complete. To begin storing and serving data on this
cluster, you must complete the following additional tasks if they have
not already been completed:
1) Join additional nodes to the cluster by running "cluster setup" on
those nodes.
2) If in a HA configuration, verify that storage failover is enabled by
running the "storage failover show" command.
3) Create a Vserver by running the "vserver setup" command.
You can access your cluster to complete these tasks by:
1) Using the NetApp System Manager to manage cluster netappu at 192.168.66.120.
NetApp System Manager must be at version 2.0 or above.
You can download NetApp System Manager from
http://support.netapp.com
2) Logging in to the cluster by using SSH (secure shell) from your work station:
Exiting the cluster setup wizard.
login: login: admin
Password:
Login incorrect
login: admin
Password:
Login incorrect
login: admin
Password: netappu1
netappu::> cluster show
Node Health Eligibility
--------------------- ------- ------------
netappu-01 true true
netappu::>
…..
PuTTY to node2
login: admin
(cluster setup)
Welcome to the cluster setup wizard.
You can enter the following commands at any time:
"help" or "?" - if you want to have a question clarified,
"back" - if you want to change previously answered questions, and
"exit" or "quit" - if you want to quit the cluster setup wizard.
Any changes you made before quitting will be saved.
You can return to cluster setup at any time by typing "cluster setup".
To accept a default or omit a question, do not enter a value.
Do you want to create a new cluster or join an existing cluster? {create, join}:
join
System Defaults:
Private cluster network ports [e0a,e0b].
Cluster port MTU values will be set to 1500.
Cluster interface IP addresses will be automatically generated.
Do you want to use these defaults? {yes, no} [yes]:
It can take several minutes to create cluster interfaces...
Step 1 of 3: Join an Existing Cluster
You can type "back", "exit", or "help" at any question.
Enter the name of the cluster you would like to join [netappu]:
Joining cluster netappu
Starting cluster support services ....
This node has joined the cluster netappu.
Step 2 of 3: Configure Storage Failover (SFO)
You can type "back", "exit", or "help" at any question.
SFO is licensed.
SFO will be enabled when the partner joins the cluster.
Step 3 of 3: Set Up the Node
You can type "back", "exit", or "help" at any question.
Enter the node management interface port [e0f]: e0f
Enter the node management interface IP address: 192.168.66.122
Enter the node management interface netmask [255.255.255.0]:
Enter the node management interface default gateway [192.168.66.2]:
A node management interface on port e0f with IP address 192.168.66.122 has been created.
Cluster setup is now complete. To begin storing and serving data on this
cluster, you must complete the following additional tasks if they have
not already been completed:
1) Join additional nodes to the cluster by running "cluster setup" on
those nodes.
2) If in a HA configuration, verify that storage failover is enabled by
running the "storage failover show" command.
3) Create a Vserver by running the "vserver setup" command.
You can access your cluster to complete these tasks by:
1) Using the NetApp System Manager to manage cluster netappu at 192.168.66.120.
NetApp System Manager must be at version 2.0 or above.
You can download NetApp System Manager from
http://support.netapp.com
2) Logging in to the cluster by using SSH (secure shell) from your work station:
Exiting the cluster setup wizard.
login: admin
Password:
netappu::> cluster show
Node Health Eligibility
--------------------- ------- ------------
netappu-01 true true
netappu-02 true true
2 entries were displayed.
netappu::> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
7 entries were displayed.
netappu::>
[email protected] or [email protected]
login: admin
Password:
netappu::> ?
up Go up one directory
antivirus> Manage antivirus
cluster> Manage clusters
dashboard> Display dashboards
event> Manage system events
exit Quit the CLI session
history Show the history of commands for this CLI session
job> Manage jobs and job schedules
lun> List LUN (logical unit of block storage) commands
man Display the on-line manual pages
network> Manage physical and virtual network connections
redo Execute a previous command
rows Show/Set the rows for this CLI session
run Run interactive or non-interactive commands in
the node shell
security> The security directory
set Display/Set CLI session settings
sis Manage volume efficiency
snapmirror> Manage SnapMirror
statistics> Display operational statistics
storage> Manage physical storage, including disks,
aggregates, and failover
system> The system directory
top Go to the top-level directory
volume> Manage virtual storage, including volumes,
snapshots, and mirrors
vserver> Manage Vservers
netappu::>
netappu::> storage ?
aggregate> Manage storage aggregates
array> The array directory
disk> Manage physical disks
errors> The errors directory
failover> Manage storage failover
load> The load directory
path> The path directory
raid-options> The raid-options directory
netappu::storage> cluster
netappu::cluster> ?
contact-info> Manage contact information for the cluster.
create Create a cluster
ha> Manage high-availability configuration
identity> Manage the cluster's attributes, including name
and serial number
join Join an existing cluster using the specified
member's IP address
modify Modify cluster node membership attributes
peer> Manage cluster peer relationships
setup Setup wizard
show Display cluster node members
statistics> Display cluster statistics
netappu::cluster statistics> ?
show Display cluster-wide statistics
netappu::cluster> man cluster
cluster Data ONTAP 8.1 cluster
NAME
cluster -- Manage clusters
DESCRIPTION
The cluster commands enable you to create and manage Data ONTAP 8 Cluster-
Mode clusters.
SUBDIRECTORIES
contact-info> - Manage contact information for the cluster.
ha> - Manage high-availability configuration
identity> - Manage the cluster's attributes, including name and serial
number
peer> - Manage cluster peer relationships
statistics> - Display cluster statistics
COMMANDS
create - Create a cluster
join - Join an existing cluster using the specified member's IP address
modify - Modify cluster node membership attributes
setup - Setup wizard
show - Display cluster node members
Data ONTAP 8.1 -o- Data ONTAP 8.1
~
~netappu::cluster> man cluster modify
cluster modify Data ONTAP 8.1 cluster modify
NAME
cluster modify -- Modify cluster node membership attributes
AVAILABILITY
This command is available to cluster administrators at the admin privilege
level.
DESCRIPTION
The cluster modify command modifies the cluster attributes of a node,
including its eligibility to participate in the cluster.
At the advanced privilege level, you can use the command to specify
whether a node holds epsilon. Epsilon is an extra fractional vote that
enables quorum to form using slightly weaker requirements. For example,
two out of four eligible nodes are sufficient to form quorum if one of
those two nodes holds epsilon.
PARAMETERS
-node {<nodename>|local} - Node
Use this parameter to specify the name of the node to modify. If you
do not specify a node, the command runs on the local node.
[-eligibility {true|false}] - Eligibility
Use this parameter with the value true to specify that the node is
eligible to participate in the cluster. Use this parameter with the
value false to specify that the node is not eligible to participate in
the cluster.
If you modify a node as ineligible to participate in the cluster, the
command prompts you for confirmation before it runs.
EXAMPLES
This example modifies a node to make it eligible to participate in the
cluster.
cluster1::> cluster modify -node node3 -eligibility true
Data ONTAP 8.1 -o- Data ONTAP 8.1
Q
netappu::cluster> storage aggr
netappu::storage aggregate> modify ?
[-aggregate] <aggregate name> Aggregate
[ -raidtype|-t {raid_dp|raid4} ] RAID Type
[ -maxraidsize|-s <integer> ] Max RAID Size
[ -snapshot-autodelete {on|off} ] Automatic Snapshot Deletion
[ -ha-policy {sfo|cfo} ] HA Policy
[ -free-space-realloc {on|off|no_redirect} ]
Free Space Reallocation
[ -percent-snapshot-space <percent> ] Space Reserved for Snapshot Copies
[ -hybrid-enabled {true|false} ] Hybrid Enabled
[ -force-hybrid-enabled|-f [true] ] Force Marking of Aggregate as Hybrid
Enabled
netappu::storage aggregate> modify
netappu::storage aggregate> scrub ?
[-aggregate] <aggregate name> Aggregate
[ -raidgroup <text> ] RAID Group
[-action] {start|stop|resume|suspend|status}
Action
netappu::storage aggregate> modify -state ?
offline
online
restricted
netappu::storage aggregate> volume ?
autosize Set/Display the autosize settings of the
flexible volume.
clone> Manage FlexClones
copy> Manage volume copy operations
create Create a new volume
delete Delete an existing volume
destroy Destroy an existing volume
efficiency> Manage volume efficiency
file> File related commands
member> Manage constituent volumes of striped volumes
modify Modify volume attributes
mount Mount a volume on another volume with a
junction-path
move> Manage volume move operations
offline Take an existing volume offline
online Bring an existing volume online
qtree> Manage qtrees
quota> Manage Quotas, Policies, Rules and Reports
rename Rename an existing volume
restrict Restrict an existing volume
show Display a list of volumes
size Set/Display the size of flexible volume.
snapshot> Manage snapshots
unmount Unmount a volume
netappu::storage aggregate> volume
netappu::storage aggregate> set -privilege advanced
Warning: These advanced commands are potentially dangerous; use them only when
directed to do so by NetApp personnel.
Do you want to continue? {y|n}: y
netappu::storage aggregate*> volume ?
add-members *Add members to an existing striped volume
autosize Set/Display the autosize settings of the
flexible volume.
clone> Manage FlexClones
copy> Manage volume copy operations
create Create a new volume
delete Delete an existing volume
destroy Destroy an existing volume
efficiency> Manage volume efficiency
file> File related commands
make-vsroot *Designate a non-root volume as a root volume of
the Vserver
member> Manage constituent volumes of striped volumes
modify Modify volume attributes
mount Mount a volume on another volume with a
junction-path
move> Manage volume move operations
offline Take an existing volume offline
online Bring an existing volume online
qtree> Manage qtrees
quota> Manage Quotas, Policies, Rules and Reports
rename Rename an existing volume
restrict Restrict an existing volume
show Display a list of volumes
size Set/Display the size of flexible volume.
snapshot> Manage snapshots
unmount Unmount a volume
netappu::storage aggregate*> volume
netappu::storage aggregate*> set admin
netappu::storage aggregate>
netappu::storage aggregate> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
7 entries were displayed.
netappu::storage aggregate> net int sho
Error: Ambiguous command. Possible matches include:
network interface show
network interface show-routing-group
network interface show-zones
netappu::storage aggregate> ne in show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
7 entries were displayed.
netappu::storage aggregate>
Day 2
NOW Site searching for System Configration guide/diagram
Only change disk ownership on spare
85% customer disable auto giveback
from Henry PAN to Everyone:
GM Class:>)
from Hector Martinez to Everyone:
Good morning Henry!
from Henry PAN to Everyone:
What's the advantage of DS4486? Thanks
from Henry PAN to Everyone:
Cool, when will you share the e-book with us? Thanks
from Henry PAN to Everyone:
:>) Thanks
from Henry PAN to Everyone:
Cool:>) Can't wait to get all your files!
from Henry PAN to Everyone:
How much performance hit could be? Thanks
from Henry PAN to Everyone:
Thanks
from Henry PAN to Everyone:
What's the diffrence compare with FAST VP from EMC? Thanks
from Henry PAN to Everyone:
OK. Thanks
from Henry PAN to Everyone:
Thanks
from Scott Anctil to Everyone:
For Flash Pool is RAID DP still recomeded or RAID 4?
http://support.netapp.com/matrix
login: admin
Password:
netappu::> stor disk show
(storage disk show)
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-01:v4.16 - - - unassigned present - -
netappu-01:v4.17 - - - unassigned present - -
netappu-01:v4.18 - - - unassigned present - -
netappu-01:v4.19 - - - unassigned present - -
netappu-01:v4.20 - - - unassigned present - -
netappu-01:v4.21 - - - unassigned present - -
netappu-01:v4.22 - - - unassigned present - -
netappu-01:v4.24 - - - unassigned present - -
netappu-01:v4.25 - - - unassigned present - -
netappu-01:v4.26 - - - unassigned present - -
netappu-01:v4.27 - - - unassigned present - -
netappu-01:v4.28 - - - unassigned present - -
netappu-01:v4.29 - - - unassigned present - -
netappu-01:v4.32 - - - unassigned present - -
netappu-01:v5.16 1020MB - - aggregate dparity aggr0 netappu-01
netappu-01:v5.17 1020MB - - aggregate parity aggr0 netappu-01
netappu-01:v5.18 1020MB - - aggregate data aggr0 netappu-01
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-01:v5.19 1020MB - - spare present - netappu-01
netappu-01:v5.20 1020MB - - spare present - netappu-01
netappu-01:v5.21 1020MB - - spare present - netappu-01
netappu-01:v5.22 1020MB - - spare present - netappu-01
netappu-01:v5.24 1020MB - - spare present - netappu-01
netappu-01:v5.25 1020MB - - spare present - netappu-01
netappu-01:v5.26 1020MB - - spare present - netappu-01
netappu-01:v5.27 1020MB - - spare present - netappu-01
netappu-01:v5.28 1020MB - - spare present - netappu-01
netappu-01:v5.29 1020MB - - spare present - netappu-01
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-01:v5.32 1020MB - - spare present - netappu-01
netappu-02:v4.16 - - - unassigned present - -
netappu-02:v4.17 - - - unassigned present - -
netappu-02:v4.18 - - - unassigned present - -
netappu-02:v4.19 - - - unassigned present - -
netappu-02:v4.20 - - - unassigned present - -
netappu-02:v4.21 - - - unassigned present - -
netappu-02:v4.22 - - - unassigned present - -
netappu-02:v4.24 - - - unassigned present - -
netappu-02:v4.25 - - - unassigned present - -
netappu-02:v4.26 - - - unassigned present - -
netappu-02:v4.27 - - - unassigned present - -
netappu-02:v4.28 - - - unassigned present - -
netappu-02:v4.29 - - - unassigned present - -
netappu-02:v4.32 - - - unassigned present - -
netappu-02:v5.16 1020MB - - aggregate dparity aggr0_netappu_02_0
netappu-02
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v5.17 1020MB - - aggregate parity aggr0_netappu_02_0
netappu-02
netappu-02:v5.18 1020MB - - aggregate data aggr0_netappu_02_0
netappu-02
netappu-02:v5.19 1020MB - - spare present - netappu-02
netappu-02:v5.20 1020MB - - spare present - netappu-02
netappu-02:v5.21 1020MB - - spare present - netappu-02
netappu-02:v5.22 1020MB - - spare present - netappu-02
netappu-02:v5.24 1020MB - - spare present - netappu-02
netappu-02:v5.25 1020MB - - spare present - netappu-02
netappu-02:v5.26 1020MB - - spare present - netappu-02
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v5.27 1020MB - - spare present - netappu-02
netappu-02:v5.28 1020MB - - spare present - netappu-02
netappu-02:v5.29 1020MB - - spare present - netappu-02
netappu-02:v5.32 1020MB - - spare present - netappu-02
netappu-02:v6.16 - - - unassigned present - -
netappu-02:v6.17 - - - unassigned present - -
netappu-02:v6.18 - - - unassigned present - -
netappu-02:v6.19 - - - unassigned present - -
netappu-02:v6.20 - - - unassigned present - -
netappu-02:v6.21 - - - unassigned present - -
netappu-02:v6.22 - - - unassigned present - -
netappu-02:v6.24 - - - unassigned present - -
netappu-02:v6.25 - - - unassigned present - -
netappu-02:v6.26 - - - unassigned present - -
netappu-02:v6.27 - - - unassigned present - -
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v6.28 - - - unassigned present - -
netappu-02:v6.29 - - - unassigned present - -
netappu-02:v6.32 - - - unassigned present - -
netappu-02:v6.33 - - - unassigned present - -
netappu-02:v6.34 - - - unassigned present - -
netappu-02:v6.35 - - - unassigned present - -
netappu-02:v6.36 - - - unassigned present - -
netappu-02:v6.37 - - - unassigned present - -
netappu-02:v6.38 - - - unassigned present - -
netappu-02:v6.39 - - - unassigned present - -
netappu-02:v6.40 - - - unassigned present - -
netappu-02:v6.41 - - - unassigned present - -
netappu-02:v6.42 - - - unassigned present - -
netappu-02:v6.43 - - - unassigned present - -
netappu-02:v6.44 - - - unassigned present - -
netappu-02:v6.45 - - - unassigned present - -
netappu-02:v6.48 - - - unassigned present - -
84 entries were displayed.
netappu::>
netappu::> disk assign -disk netappu-01 v4* -owner netappu-01
Error: 'v4*' was not expected. Please specify -fieldname first.
netappu::> disk assign -disk netappu-02 v4* -owner netappu-02
Error: 'v4*' was not expected. Please specify -fieldname first.
netappu::> stor aggr show
(storage aggregate show)
Aggregate Size Available Used% State #Vols Nodes RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0 900MB 20.12MB 98% online 1 netappu-01 raid_dp,
normal
aggr0_netappu_02_0
900MB 20.47MB 98% online 1 netappu-02 raid_dp,
normal
2 entries were displayed.
netappu::>
netappu::> volume show
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
netappu-01
vol0 aggr0 online RW 851.5MB 629.2MB 26%
netappu-02
vol0 aggr0_netappu_02_0
online RW 851.5MB 618.9MB 27%
2 entries were displayed.
netappu::> stor aggr create ?
(storage aggregate create)
[-aggregate] <aggregate name> Aggregate
{ [ -nodes <nodename>, ... ] Nodes
[-diskcount] <integer> Number Of Disks
[ -chksumstyle <checksum style> ] Checksum Style
[ -disktype|-T {ATA | BSAS | FCAL | FSAS | LUN | MSATA | SAS | SATA | SSD} ]
Disk Type
[ -disksize <integer> ] Disk Size(GB)
[ -diskrpm|-R <integer> ] Disk RPM
| [-disklist|-d] <disk path name>, ... } Disks
[ -allow-same-carrier [true] ] Allow Same RAID Group Within
Carrier
[ -raidtype|-t {raid_dp|raid4} ] RAID Type
[ -maxraidsize|-s <integer> ] Max RAID Size
[ -simulate [true] ] Simulate Aggregate creation
[ -volume-style {flex|striped} ] Volume Style
[ -allow-mixed|-f [true] ] Allow Disks With Different RPMs
[ -block-type|-B {32-bit|64-bit} ] Block Type
netappu::> stor aggr create
netappu::> stor aggr create -aggr n01_aggr1 -node netappu-01 -diskcount 3
(storage aggregate create)
[Job 19] Job succeeded: DONE
netappu::>
netappu::> stor aggr show
(storage aggregate show)
Aggregate Size Available Used% State #Vols Nodes RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0 900MB 19.75MB 98% online 1 netappu-01 raid_dp,
normal
aggr0_netappu_02_0
900MB 20.46MB 98% online 1 netappu-02 raid_dp,
normal
n01_aggr1 900MB 899.9MB 0% online 0 netappu-01 raid_dp,
normal
3 entries were displayed.
netappu::> stor aggr show -aggr n01_aggr1
(storage aggregate show)
Aggregate: n01_aggr1
Size: 900MB
Used Size: 116KB
Used Percentage: 0%
Available Size: 899.9MB
State: online
Nodes: netappu-01
Number Of Disks: 3
Checksum Style: block
Disks: netappu-01:v5.19,
netappu-01:v5.20,
netappu-01:v5.21
Number Of Volumes: 0
Plexes: /n01_aggr1/plex0(online)
RAID Groups: /n01_aggr1/plex0/rg0 (block)
RAID Type: raid_dp
Max RAID Size: 16
RAID Status: raid_dp, normal
Checksum Enabled: true
Checksum Status: active
Inconsistent: false
Hybrid: false
Total Hybrid Cache Size: 0B
Automatic Snapshot Deletion: on
HA Policy: sfo
Free Space Reallocation: off
Space Reserved for Snapshot Copies: 0%
Hybrid Enabled: false
Volume Style: flex
Has Mroot Volume: false
Has Partner Node Mroot Volume: false
Is Root: false
Block Type: 64-bit
Space Used By metadata for Volume Efficiency: 0B
netappu::>
netappu::> aggr show -aggr n01_aggr1 -instance
Aggregate: n01_aggr1
Size: 2.64GB
Used Size: 148KB
Used Percentage: 0%
Available Size: 2.64GB
State: online
Nodes: netappu-01
Number Of Disks: 5
Checksum Style: block
Disks: netappu-01:v5.19,
netappu-01:v5.20,
netappu-01:v5.21,
netappu-01:v5.22,
netappu-01:v5.24
Number Of Volumes: 0
Plexes: /n01_aggr1/plex0(online)
RAID Groups: /n01_aggr1/plex0/rg0 (block)
RAID Type: raid_dp
Max RAID Size: 16
RAID Status: raid_dp, normal
Checksum Enabled: true
Checksum Status: active
Inconsistent: false
Hybrid: false
Total Hybrid Cache Size: 0B
Automatic Snapshot Deletion: on
HA Policy: sfo
Free Space Reallocation: off
Space Reserved for Snapshot Copies: 0%
Hybrid Enabled: false
Volume Style: flex
Has Mroot Volume: false
Has Partner Node Mroot Volume: false
Is Root: false
Block Type: 64-bit
Space Used By metadata for Volume Efficiency: 0B
netappu::>
netappu::> stor aggr create ?
(storage aggregate create)
[-aggregate] <aggregate name> Aggregate
{ [ -nodes <nodename>, ... ] Nodes
[-diskcount] <integer> Number Of Disks
[ -chksumstyle <checksum style> ] Checksum Style
[ -disktype|-T {ATA | BSAS | FCAL | FSAS | LUN | MSATA | SAS | SATA | SSD} ]
Disk Type
[ -disksize <integer> ] Disk Size(GB)
[ -diskrpm|-R <integer> ] Disk RPM
| [-disklist|-d] <disk path name>, ... } Disks
[ -allow-same-carrier [true] ] Allow Same RAID Group Within
Carrier
[ -raidtype|-t {raid_dp|raid4} ] RAID Type
[ -maxraidsize|-s <integer> ] Max RAID Size
[ -simulate [true] ] Simulate Aggregate creation
[ -volume-style {flex|striped} ] Volume Style
[ -allow-mixed|-f [true] ] Allow Disks With Different RPMs
[ -block-type|-B {32-bit|64-bit} ] Block Type
netappu::> stor aggr create -aggr n02_fp1 -node netappu-02 -diskcount 10
(storage aggregate create)
[Job 22] Job succeeded: DONE
netappu::>
netappu::> stor aggr show -aggr n02_fp1
(storage aggregate show)
Aggregate: n02_fp1
Size: 7.03GB
Used Size: 180KB
Used Percentage: 0%
Available Size: 7.03GB
State: online
Nodes: netappu-02
Number Of Disks: 10
Checksum Style: block
Disks: netappu-02:v5.19,
netappu-02:v5.20,
netappu-02:v5.21,
netappu-02:v5.22,
netappu-02:v5.24,
netappu-02:v5.25,
netappu-02:v5.26,
netappu-02:v5.27,
netappu-02:v5.28,
netappu-02:v5.29
Number Of Volumes: 0
Plexes: /n02_fp1/plex0(online)
RAID Groups: /n02_fp1/plex0/rg0 (block)
RAID Type: raid_dp
Max RAID Size: 16
RAID Status: raid_dp, normal
Checksum Enabled: true
Checksum Status: active
Inconsistent: false
Hybrid: false
Total Hybrid Cache Size: 0B
Automatic Snapshot Deletion: on
HA Policy: sfo
Free Space Reallocation: off
Space Reserved for Snapshot Copies: 0%
Hybrid Enabled: false
Volume Style: flex
Has Mroot Volume: false
Has Partner Node Mroot Volume: false
Is Root: false
Block Type: 64-bit
Space Used By metadata for Volume Efficiency: 0B
netappu::> stor disk assign -disk netappu-02:v6* -owner netappu-02
(storage disk assign)
netappu::> stor disk show -type SSD
(storage disk show)
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v6.16 520.5MB - - spare present - netappu-02
netappu-02:v6.17 520.5MB - - spare present - netappu-02
netappu-02:v6.18 520.5MB - - spare present - netappu-02
netappu-02:v6.19 520.5MB - - spare present - netappu-02
netappu-02:v6.20 520.5MB - - spare present - netappu-02
netappu-02:v6.21 520.5MB - - spare present - netappu-02
netappu-02:v6.22 520.5MB - - spare present - netappu-02
netappu-02:v6.24 520.5MB - - spare present - netappu-02
netappu-02:v6.25 520.5MB - - spare present - netappu-02
netappu-02:v6.26 520.5MB - - spare present - netappu-02
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v6.27 520.5MB - - spare present - netappu-02
netappu-02:v6.28 520.5MB - - spare present - netappu-02
netappu-02:v6.29 520.5MB - - spare present - netappu-02
netappu-02:v6.32 520.5MB - - spare present - netappu-02
netappu-02:v6.33 520.5MB - - spare present - netappu-02
netappu-02:v6.34 520.5MB - - spare present - netappu-02
netappu-02:v6.35 520.5MB - - spare present - netappu-02
netappu-02:v6.36 520.5MB - - spare present - netappu-02
netappu-02:v6.37 520.5MB - - spare present - netappu-02
netappu-02:v6.38 520.5MB - - spare present - netappu-02
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v6.39 520.5MB - - spare present - netappu-02
netappu-02:v6.40 520.5MB - - spare present - netappu-02
netappu-02:v6.41 520.5MB - - spare present - netappu-02
netappu-02:v6.42 520.5MB - - spare present - netappu-02
netappu-02:v6.43 520.5MB - - spare present - netappu-02
netappu-02:v6.44 520.5MB - - spare present - netappu-02
netappu-02:v6.45 520.5MB - - spare present - netappu-02
netappu-02:v6.48 520.5MB - - spare present - netappu-02
28 entries were displayed.
netappu::>
netappu::> stor aggr modify -aggr n02_fp1 -hybrid-enabled true
(storage aggregate modify)
netappu::>
netappu::> stor aggr add-disks -aggr n02_fp1 -diskcount 6 -disktype SSD
(storage aggregate add-disks)
netappu::> stor disk show -aggr n02_fp1
(storage disk show)
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v5.19 1020MB - - aggregate dparity n02_fp1 netappu-02
netappu-02:v5.20 1020MB - - aggregate parity n02_fp1 netappu-02
netappu-02:v5.21 1020MB - - aggregate data n02_fp1 netappu-02
netappu-02:v5.22 1020MB - - aggregate data n02_fp1 netappu-02
netappu-02:v5.24 1020MB - - aggregate data n02_fp1 netappu-02
netappu-02:v5.25 1020MB - - aggregate data n02_fp1 netappu-02
netappu-02:v5.26 1020MB - - aggregate data n02_fp1 netappu-02
netappu-02:v5.27 1020MB - - aggregate data n02_fp1 netappu-02
netappu-02:v5.28 1020MB - - aggregate data n02_fp1 netappu-02
netappu-02:v5.29 1020MB - - aggregate data n02_fp1 netappu-02
Usable Container
Disk Size Shelf Bay Type Position Aggregate Owner
---------------- ---------- ----- --- ----------- ---------- --------- --------
netappu-02:v6.16 520.5MB - - aggregate dparity n02_fp1 netappu-02
netappu-02:v6.17 520.5MB - - aggregate parity n02_fp1 netappu-02
netappu-02:v6.18 520.5MB - - aggregate data n02_fp1 netappu-02
netappu-02:v6.19 520.5MB - - aggregate data n02_fp1 netappu-02
netappu-02:v6.20 520.5MB - - aggregate data n02_fp1 netappu-02
netappu-02:v6.21 520.5MB - - aggregate data n02_fp1 netappu-02
16 entries were displayed.
Exe 6:
netappu::> vserver show
Admin Root Name Name
Vserver Type State Volume Aggregate Service Mapping
----------- ------- --------- ---------- ---------- ------- -------
netappu admin - - - - -
netappu-01 node - - - - -
netappu-02 node - - - - -
3 entries were displayed.
netappu::> volume show
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
netappu-01
vol0 aggr0 online RW 851.5MB 624.2MB 26%
netappu-02
vol0 aggr0_netappu_02_0
online RW 851.5MB 612.1MB 28%
2 entries were displayed.
netappu::> vserver create -vserver vs1 -rootvolume vs1root -aggr n01_aggr1 -ns-switch file -rootvolume-security-style unix
[Job 23] Job succeeded: Successful
netappu::> vserver show
Admin Root Name Name
Vserver Type State Volume Aggregate Service Mapping
----------- ------- --------- ---------- ---------- ------- -------
netappu admin - - - - -
netappu-01 node - - - - -
netappu-02 node - - - - -
vs1 cluster running vs1root n01_aggr1 file file
4 entries were displayed.
netappu::> vserver show -vserver vs1
Vserver: vs1
Vserver Type: cluster
Vserver UUID: 2c33e6e9-9bb7-11e2-b3fb-123478563412
Root Volume: vs1root
Aggregate: n01_aggr1
Name Service Switch: file
Name Mapping Switch: file
NIS Domain: -
Root Volume Security Style: unix
LDAP Client: -
Language: C
Snapshot Policy: default
Comment:
Anti-Virus On-Access Policy: default
Quota Policy: default
List of Aggregates Assigned: -
Limit on Maximum Number of Volumes allowed: unlimited
Vserver Admin State: running
Allowed Protocols: nfs, cifs, fcp, iscsi
Disallowed Protocols: -
Is Repository Vserver: false
netappu::> volume show
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
netappu-01
vol0 aggr0 online RW 851.5MB 623.4MB 26%
netappu-02
vol0 aggr0_netappu_02_0
online RW 851.5MB 611.1MB 28%
vs1 vs1root n01_aggr1 online RW 20MB 18.89MB 5%
3 entries were displayed.
netappu::>
netappu::> volume show -vserver vs1 -volume vs1root
Vserver Name: vs1
Volume Name: vs1root
Aggregate Name: n01_aggr1
Volume Size: 20MB
Volume Data Set ID: 1025
Volume Master Data Set ID: 2147484673
Volume State: online
Volume Type: RW
Volume Style: flex
Is Cluster-Mode Volume: true
Is Constituent Volume: false
Export Policy: default
User ID: 0
Group ID: 1
Security Style: unix
UNIX Permissions: ---rwx------
Junction Path: /
Junction Path Source: -
Junction Active: -
Junction Parent Volume: -
Comment:
Available Size: 18.89MB
Total User-Visible Size: 19MB
Used Size: 108KB
Used Percentage: 5%
Autosize Enabled (for flexvols only): false
Maximum Autosize (for flexvols only): 23.91MB
Autosize Increment (for flexvols only): 1020KB
Total Files (for user-visible data): 566
Files Used (for user-visible data): 96
Space Guarantee Style: volume
Space Guarantee in Effect: true
Space Reserved for Snapshots: 5%
Snapshot Reserve Used: 5%
Snapshot Policy: default
Creation Time: Tue Apr 02 17:03:11 2013
Clone Volume: false
Anti-Virus On-Access Policy: default
NVFAIL Option: off
Is File System Size Fixed: false
Extent Option: off
Reserved Space for Overwrites: 0B
Fractional Reserve: 100%
Snapshot Cloning Dependency: off
Primary Space Management Strategy: volume_grow
Read Reallocation Option: off
Naming Scheme for Automatic Snapshots: create_time
Inconsistency in the File System: false
Is Volume Quiesced (On-Disk): false
Is Volume Quiesced (In-Memory): false
Volume Contains Shared or Compressed Data: false
Space Saved by Storage Efficiency: 0B
Percentage Saved by Storage Efficiency: 0%
Space Saved by Deduplication: 0B
Percentage Saved by Deduplication: 0%
Space Shared by Deduplication: 0B
Space Saved by Compression: 0B
Percentage Space Saved by Compression: 0%
Block Type: 64-bit
Constituent Volume Role: -
Is Volume Moving: false
Is Volume Move in Cutover Phase: false
Flash Pool Caching Eligibility: read-write
Flash Pool Write Caching Ineligibility Reason: -
netappu::>
netappu::> stor aggr show
(storage aggregate show)
Aggregate Size Available Used% State #Vols Nodes RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0 900MB 18.46MB 98% online 1 netappu-01 raid_dp,
normal
aggr0_netappu_02_0
900MB 17.13MB 98% online 1 netappu-02 raid_dp,
normal
n01_aggr1 2.64GB 2.62GB 1% online 1 netappu-01 raid_dp,
normal
n02_aggr1 2.64GB 2.64GB 0% online 0 netappu-01 raid_dp,
normal
n02_fp1 7.03GB 7.03GB 0% online 0 netappu-02 raid_dp,
hybrid,
normal
5 entries were displayed.
netappu::> volume create -vserver vs1 -volume volume1 -aggr n01_aggr1 -junction-path /vol1
[Job 24] Job succeeded: Successful
netappu::> vol show
(volume show)
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
netappu-01
vol0 aggr0 online RW 851.5MB 623.1MB 26%
netappu-02
vol0 aggr0_netappu_02_0
online RW 851.5MB 610.8MB 28%
vs1 volume1 n01_aggr1 online RW 20MB 18.90MB 5%
vs1 vs1root n01_aggr1 online RW 20MB 18.89MB 5%
4 entries were displayed.
netappu::> vol show -vserver vs1 -volume volume1
(volume show)
Vserver Name: vs1
Volume Name: volume1
Aggregate Name: n01_aggr1
Volume Size: 20MB
Volume Data Set ID: 1026
Volume Master Data Set ID: 2147484674
Volume State: online
Volume Type: RW
Volume Style: flex
Is Cluster-Mode Volume: true
Is Constituent Volume: false
Export Policy: default
User ID: 0
Group ID: 1
Security Style: unix
UNIX Permissions: ---rwx------
Junction Path: /vol1
Junction Path Source: RW_volume
Junction Active: true
Junction Parent Volume: vs1root
Comment:
Available Size: 18.90MB
Total User-Visible Size: 19MB
Used Size: 104KB
Used Percentage: 5%
Autosize Enabled (for flexvols only): false
Maximum Autosize (for flexvols only): 23.91MB
Autosize Increment (for flexvols only): 1020KB
Total Files (for user-visible data): 566
Files Used (for user-visible data): 96
Space Guarantee Style: volume
Space Guarantee in Effect: true
Space Reserved for Snapshots: 5%
Snapshot Reserve Used: 0%
Snapshot Policy: default
Creation Time: Tue Apr 02 17:09:10 2013
Clone Volume: false
Anti-Virus On-Access Policy: default
NVFAIL Option: off
Is File System Size Fixed: false
Extent Option: off
Reserved Space for Overwrites: 0B
Fractional Reserve: 100%
Snapshot Cloning Dependency: off
Primary Space Management Strategy: volume_grow
Read Reallocation Option: off
Naming Scheme for Automatic Snapshots: create_time
Inconsistency in the File System: false
Is Volume Quiesced (On-Disk): false
Is Volume Quiesced (In-Memory): false
Volume Contains Shared or Compressed Data: false
Space Saved by Storage Efficiency: 0B
Percentage Saved by Storage Efficiency: 0%
Space Saved by Deduplication: 0B
Percentage Saved by Deduplication: 0%
Space Shared by Deduplication: 0B
Space Saved by Compression: 0B
Percentage Space Saved by Compression: 0%
Block Type: 64-bit
Constituent Volume Role: -
Is Volume Moving: false
Is Volume Move in Cutover Phase: false
Flash Pool Caching Eligibility: read-write
Flash Pool Write Caching Ineligibility Reason: -
netappu::>
from Henry PAN to Everyone:
GM Class:>)
from Hector Martinez to Everyone:
Good morning Henry!
from Henry PAN to Everyone:
What's the advantage of DS4486? Thanks
from Henry PAN to Everyone:
Cool, when will you share the e-book with us? Thanks
from Henry PAN to Everyone:
:>) Thanks
from Henry PAN to Everyone:
Cool:>) Can't wait to get all your files!
from Henry PAN to Everyone:
How much performance hit could be? Thanks
from Henry PAN to Everyone:
Thanks
from Henry PAN to Everyone:
What's the diffrence compare with FAST VP from EMC? Thanks
from Henry PAN to Everyone:
OK. Thanks
from Henry PAN to Everyone:
Thanks
from Scott Anctil to Everyone:
For Flash Pool is RAID DP still recomeded or RAID 4?
from Hector Martinez to Everyone:
First link: http://bit.ly/NTAPCM-1
from Hector Martinez to Everyone:
Go to the link and click on FILE->DOWNLOAD to get the complete zip file...
from Hector Martinez to Everyone:
Second link: http://bit.ly/NTAPCM-2
from Henry PAN to Everyone:
Done
from David Brown to Everyone:
done
from Henry PAN to Everyone:
Yes
from Henry PAN to Everyone:
Yes
from Henry PAN to Everyone:
When should I use Junctions? Thanks
from Henry PAN to Everyone:
OK
from Henry PAN to Everyone:
When should I use Infinite vol? Thanks
from Henry PAN to Everyone:
Thanks
from Henry PAN to Everyone:
Sorry, have to work on a cutomer call:<(...
from Henry PAN to Everyone:
Done Exe 6:>)
from Hector Martinez (privately):
Ok, great!
from Hector Martinez (privately):
Ill see you 1:15 pm
from Henry PAN to Everyone:
What's the diffrence between cluster ports & intercluster ports? Thanks
from Henry PAN to Everyone:
:>)
from Henry PAN to Everyone:
Yes
from Henry PAN to Everyone:
wHY 2 E3A?
from Henry PAN to Everyone:
Should be e3a & e3b?
from Henry PAN to Everyone:
Would you please forward that email from NAUon supported switches to me? Thanks
from Henry PAN to Everyone:
:>) Thanks
from Henry PAN to Everyone:
from Hector Martinez to Everyone:
Module 7 slide 14 of the clustered ONTAP 8.1.1 materials lists Cisco Nexus switch 5548 is listed as support technology. It has been confirmed that this is NOT the case. Also, the Cisco Nexus 5010 and 5020 were end-of-life on Dec 31, 2012 (but still supported), the current configurations are as follows:2-8 nodes use NetApp CN16108-24 nodes use Cisco Nexus 5596
Will support Juniper in the end of 2013
Exe 7:
netappu::> network port show
Auto-Negot Duplex Speed (Mbps)
Node Port Role Link MTU Admin/Oper Admin/Oper Admin/Oper
------ ------ ------------ ---- ----- ----------- ---------- ------------
netappu-01
e0a cluster up 1500 true/true full/full auto/1000
e0b cluster up 1500 true/true full/full auto/1000
e0c data up 1500 true/true full/full auto/1000
e0d data up 1500 true/true full/full auto/1000
e0e data up 1500 true/true full/full auto/1000
e0f node-mgmt up 1500 true/true full/full auto/1000
netappu-02
e0a cluster up 1500 true/true full/full auto/1000
e0b cluster up 1500 true/true full/full auto/1000
e0c data up 1500 true/true full/full auto/1000
e0d data up 1500 true/true full/full auto/1000
e0e data up 1500 true/true full/full auto/1000
e0f node-mgmt up 1500 true/true full/full auto/1000
12 entries were displayed.
netappu::>
Exe 8:
netappu::> net int create -vserver vs1 -lif data1 -role data -home-node netappu-01 -home-port a0a -address 192.168.66.131 -netmask 255.255.255.0
(network interface create)
Info: Your interface was created successfully; the routing group
d192.168.66.0/24 was created
netappu::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
vs1
data1 up/up 192.168.66.131/24 netappu-01 a0a true
8 entries were displayed.
netappu::> net int show -vserver vs1 -lif data1
(network interface show)
Vserver Name: vs1
Logical Interface Name: data1
Role: data
Data Protocol: nfs, cifs, fcache
Home Node: netappu-01
Home Port: a0a
Current Node: netappu-01
Current Port: a0a
Operational Status: up
Extended Status: -
Is Home: true
Network Address: 192.168.66.131
Netmask: 255.255.255.0
IPv4 Link Local: -
Bits in the Netmask: 24
Routing Group Name: d192.168.66.0/24
Administrative Status: up
Failover Policy: nextavail
Firewall Policy: data
Auto Revert: false
Use Failover Group: system-defined
Fully Qualified DNS Zone Name: none
Failover Group Name:
FCP WWPN: -
Comment:
netappu::> network routing-groups show
Routing
Vserver Group Subnet Role Metric
--------- --------- --------------- ------------ -------
netappu
c192.168.66.0/24
192.168.66.0/24 cluster-mgmt 20
netappu-01
c169.254.0.0/16
169.254.0.0/16 cluster 30
n192.168.66.0/24
192.168.66.0/24 node-mgmt 10
netappu-02
c169.254.0.0/16
169.254.0.0/16 cluster 30
n192.168.66.0/24
192.168.66.0/24 node-mgmt 10
vs1
d192.168.66.0/24
192.168.66.0/24 data 20
6 entries were displayed.
netappu::> network routing-groups route show
Routing
Vserver Group Destination Gateway Metric
--------- --------- --------------- --------------- ------
netappu
c192.168.66.0/24
0.0.0.0/0 192.168.66.2 20
netappu-01
n192.168.66.0/24
0.0.0.0/0 192.168.66.2 10
netappu-02
n192.168.66.0/24
0.0.0.0/0 192.168.66.2 10
3 entries were displayed.
netappu::> net int migrate -vserver vs1 -lif data1 -dest-node netappu-02 -dest-port e0c
(network interface migrate)
netappu::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
vs1
data1 up/up 192.168.66.131/24 netappu-02 e0c false
8 entries were displayed.
netappu::> net int show -vserver vs1 -lif data1
(network interface show)
Vserver Name: vs1
Logical Interface Name: data1
Role: data
Data Protocol: nfs, cifs, fcache
Home Node: netappu-01
Home Port: a0a
Current Node: netappu-02
Current Port: e0c
Operational Status: up
Extended Status: -
Is Home: false
Network Address: 192.168.66.131
Netmask: 255.255.255.0
IPv4 Link Local: -
Bits in the Netmask: 24
Routing Group Name: d192.168.66.0/24
Administrative Status: up
Failover Policy: nextavail
Firewall Policy: data
Auto Revert: false
Use Failover Group: system-defined
Fully Qualified DNS Zone Name: none
Failover Group Name:
FCP WWPN: -
Comment:
netappu::> net int revert -vserver vs1 -lif data1
(network interface revert)
netappu::> net int modify -vserver vs1 -lif data1 -home-node netappu-02 -home-port e0d
(network interface modify)
netappu::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
vs1
data1 up/up 192.168.66.131/24 netappu-01 a0a false
8 entries were displayed.
netappu::> net int revert -vserver vs1 -lif data1
(network interface revert)
netappu::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
vs1
data1 up/up 192.168.66.131/24 netappu-02 e0d true
8 entries were displayed.
netappu::> net int show -vserver vs1 -lif data1 -instance
(network interface show)
Vserver Name: vs1
Logical Interface Name: data1
Role: data
Data Protocol: nfs, cifs, fcache
Home Node: netappu-02
Home Port: e0d
Current Node: netappu-02
Current Port: e0d
Operational Status: up
Extended Status: -
Is Home: true
Network Address: 192.168.66.131
Netmask: 255.255.255.0
IPv4 Link Local: -
Bits in the Netmask: 24
Routing Group Name: d192.168.66.0/24
Administrative Status: up
Failover Policy: nextavail
Firewall Policy: data
Auto Revert: false
Use Failover Group: system-defined
Fully Qualified DNS Zone Name: none
Failover Group Name:
FCP WWPN: -
Comment:
netappu::> net int failover show
(network interface failover show)
Logical Home Failover Failover
Vserver Interface Node:Port Group Usage Group
-------- --------------- --------------------- --------------- ---------------
netappu
cluster_mgmt netappu-01:e0c enabled clusterwide
Failover Targets: netappu-01:e0c, netappu-01:a0a,
netappu-02:e0c, netappu-02:e0d,
netappu-02:e0e
netappu-01
clus1 netappu-01:e0a system-defined
clus2 netappu-01:e0b system-defined
mgmt1 netappu-01:e0f disabled
Failover Targets: netappu-01:e0f
netappu-02
clus1 netappu-02:e0a system-defined
clus2 netappu-02:e0b system-defined
mgmt1 netappu-02:e0f disabled
Failover Targets: netappu-02:e0f
vs1
data1 netappu-02:e0d system-defined
Failover Targets: netappu-02:e0d, netappu-02:e0e,
netappu-02:e0c, netappu-01:a0a,
netappu-01:e0c
8 entries were displayed.
netappu::> system node reboot -node netappu-02
Warning: Are you sure you want to reboot the node? {y|n}: y
login: admin
Password:
Waiting for PIDS: 731
netappu::> .
Waiting for PIDS: 708.
Terminated
.
System rebooting...
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting...
x86_64/freebsd/image1/kernel data=0x80f178+0x138350 syms=[0x8+0x3b9a0+0x8+0x27619]
x86_64/freebsd/image1/platform.ko size 0x237fe8 at 0xaab000
NetApp Data ONTAP 8.1.2 Cluster-Mode
Copyright (C) 1992-2012 NetApp.
All rights reserved.
md1.uzip: 26368 x 16384 blocks
md2.uzip: 3584 x 16384 blocks
*******************************
* *
* Press Ctrl-C for Boot Menu. *
* *
Generating host.conf.
Apr 02 19:44:53 [netappu-02:nv.fake:CRITICAL]: 32 MB system memory being used to simulate NVRAM.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0f: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0e: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0d: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0c: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0b: Link up.
Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0a: Link up.
Apr 02 19:45:00 [netappu-02:diskown.isEnabled:info]: software ownership has been enabled for this system
Apr 02 19:45:00 [netappu-02:dcs.framework.enabled:info]: The DCS framework is enabled on this node.
route add: bad address: gw 127.0.20.1 equal to destination 127.0.2Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig'. The full command line is 'ifconfig lo 127.0.0.1'.
Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv losk 127.0.20.1'.
Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'route_priv'. The full command line is 'route_priv add host 127.0.20.1 127.0.20.1 0'.
Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo 0'.
Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo 127.0.0.1'.
Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'route_priv'. The full command line is 'route_priv add host 127.0.10.1 127.0.20.1 0'.
0.1.
add host 127.0.10.1: gateway 127.0.20.1
WAFL CPLEDGER is enabled. Checklist = 0x7ff841ff
Apr 02 19:45:01 [netappu-02:wafl.memory.status:info]: 418MB of memory is currently available for the WAFL file system.
Apr 02 19:45:09 [netappu-02:fmmb.current.lock.disk:info]: Disk v5.16 is a local HA mailbox disk.
Apr 02 19:45:09 [netappu-02:fmmb.current.lock.disk:info]: Disk v5.17 is a local HA mailbox disk.
Apr 02 19:45:09 [netappu-02:fmmb.instStat.change:info]: normal mailbox instance on local side.
Apr 02 19:45:10 [netappu-02:coredump.host.spare.none:info]: No sparecore disk was found for host 0.
Apr 02 19:45:10 [netappu-02:raid.cksum.replay.summary:info]: Replayed 0 checksum blocks.
Apr 02 19:45:10 [netappu-02:raid.stripe.replay.summary:info]: Replayed 0 stripes.
Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'n02_fp1' UUID 'daa17509-9ba7-11e2-b3fb-123478563412' was built in 0 msec, after scanning 0 inodes and restarting -1 times with a final result of starting.
Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'n02_fp1' UUID 'daa17509-9ba7-11e2-b3fb-123478563412' was built in 0 msec, after scanning 2 inodes and restarting 0 times with a final result of success.
Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'aggr0_netappu_02_0' UUID 'bc41b09e-7d77-11e2-a2c1-123478563412' was built in 0 msec, after scanning 0 inodes and restarting -1 times with a final result of starting.
Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'aggr0_netappu_02_0' UUID 'bc41b09e-7d77-11e2-a2c1-123478563412' was built in 125 msec, after scanning 12 inodes and restarting 4 times with a final result of success.
Apr 02 19:45:22 [netappu-02:kern.syslog.msg:notice]: The system was down for 107 seconds
Apr 02 19:45:22 [netappu-02:tar.csum.match:info]: Stored checksum matches, not extracting local://tmp/prestage/mroot.tgz.
Apr 02 19:45:22 [netappu-02:tar.csum.match:info]: Stored checksum matches, not extracting local://tmp/prestage/pmroot.tgz.
Apr 02 19:45:25 [netappu-02:dfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk drives
netappu-02
Apr 02 19:45:25 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'routed'. The full command line is 'routed off'.
Apr 02 19:45:25 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'options'. The full command line is 'options dns.enable off'.
Apr 02 19:45:25 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'options'. The full command line is 'options nis.enable off'.
Apr 02 19:45:25 [netappu-02:snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests from root. Reason: Password is too short (SNMPv3 requires at least 8 characters).
Apr 02 19:45:26 [netappu-02:mgr.opsmgr.autoreg.norec:warning]: No SRV records found for the System Manager server, or the server is not located on this subnet.
Apr 02 19:45:26 [netappu-02:perf.archive.start:info]: Performance archiver started. Sampling 21 objects and 339 counters.
Apr 02 19:45:26 [netappu-02:mgr.boot.disk_done:info]: NetApp Release 8.1.2 Cluster-Mode boot complete. Last disk update written at Tue Apr 2 19:43:27 GMT 2013
Apr 02 19:45:26 [netappu-02:cf.fm.missingAdapter:error]: Warning: cf is licensed yet an interconnect adapter was not found
Apr 02 19:45:26 [netappu-02:mgr.boot.reason_ok:notice]: System rebooted after a reboot command.
Apr 02 19:45:26 [netappu-02:callhome.reboot.reboot:info]: Call home for REBOOT (reboot command)
Can't set cifs branchcache server secret.
Apr 02 19:45:26 [netappu-02:httpd.config.mime.missing:warning]: /etc/httpd.mimetypes.sample file is missing.
Apr 02 19:45:26 [netappu-02:lmgr.reclaim.locks:debug]: lock reclaims on volume: 'aggr0_netappu_02_0' iniatiated by : 'boot_grace_start'.
Apr 02 19:45:26 [netappu-02:lmgr.reclaim.locks:debug]: lock reclaims on volume: 'n02_fp1' iniatiated by : 'boot_grace_start'.
Apr 02 19:45:26 [netappu-02:ha.local.dbladeId:debug]: D-blade ID of the local node is dc8ab514-7d75-11e2-815e-15b4677aa19d.
Apr 02 19:45:26 [netappu-02:wafl.scan.start:info]: Starting HyA Hit Update on aggregate n02_fp1.
Apr 02 19:45:26 [netappu-02:clam.enable:info]: CLAM functionality is enabled.
Apr 02 19:45:26 [netappu-02:unowned.disk.reminder:info]: 14 disks are currently unowned. Use 'disk assign' to assign the disks to a filer.
Ipspace "acp-ipspace" created
rpc failed: RPC: Timed out
mroot is now available
mroot is now available
Tue Apr 2 19:47:14 UTC 2013
login:
netappu::> net int revert -vserver vs1 -lif data*
(network interface revert)
netappu::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
vs1
data1 up/up 192.168.66.131/24 netappu-02 e0d true
8 entries were displayed.
netappu::> network port show
Auto-Negot Duplex Speed (Mbps)
Node Port Role Link MTU Admin/Oper Admin/Oper Admin/Oper
------ ------ ------------ ---- ----- ----------- ---------- ------------
netappu-01
a0a data up 1500 true/- auto/full auto/1000
a0a-11 data up 1500 true/false auto/full auto/1000
a0a-22 data up 1500 true/false auto/full auto/1000
a0a-33 data up 1500 true/false auto/full auto/1000
e0a cluster up 1500 true/true full/full auto/1000
e0b cluster up 1500 true/true full/full auto/1000
e0c data up 1500 true/true full/full auto/1000
e0d data up 1500 true/true full/full auto/1000
e0e data up 1500 true/true full/full auto/1000
e0f node-mgmt up 1500 true/true full/full auto/1000
netappu-02
e0a cluster up 1500 true/true full/full auto/1000
e0b cluster up 1500 true/true full/full auto/1000
e0c data up 1500 true/true full/full auto/1000
e0d data up 1500 true/true full/full auto/1000
e0e data up 1500 true/true full/full auto/1000
e0f node-mgmt up 1500 true/true full/full auto/1000
16 entries were displayed.
netappu::> net port vlan show
(network port vlan show)
Network Network
Node VLAN Name Port VLAN ID MAC Address
------ --------- ------- -------- -----------------
netappu-01
a0a-11 a0a 11 02:50:56:ad:1a:bb
a0a-22 a0a 22 02:50:56:ad:1a:bb
a0a-33 a0a 33 02:50:56:ad:1a:bb
3 entries were displayed.
netappu::> net port vlan delete -node netappu-01 -vlan-name a0a-11
(network port vlan delete)
netappu::> net port vlan delete -node netappu-01 -vlan-name a0a-22
(network port vlan delete)
netappu::> net port vlan delete -node netappu-01 -vlan-name a0a-33
(network port vlan delete)
netappu::> set advanced
Warning: These advanced commands are potentially dangerous; use them only when
directed to do so by NetApp personnel.
Do you want to continue? {y|n}: y
netappu::*> net port modify -node netappu-01 -port a0a -up-admin false
(network port modify)
netappu::*> set admin
netappu::> net port ifgrp delete -node netappu-01 -ifgrp a0a
(network port ifgrp delete)
netappu::>
First link: http://bit.ly/NTAPCM-1
from Hector Martinez to Everyone:
Go to the link and click on FILE->DOWNLOAD to get the complete zip file...
from Hector Martinez to Everyone:
Second link: http://bit.ly/NTAPCM-2
Day 3
netappu::> vserver services ldap
netappu::vserver services ldap> ?
client> Manage LDAP client configurations
create Create an LDAP configuration
delete Delete an LDAP configuration
modify Modify an LDAP configuration
show Display LDAP configurations
netappu::vserver services ldap>
netappu::vserver services ldap> vserver services ldap show
This table is currently empty.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>net view ntapvs2
Shared resources at ntapvs2
?
Share name Type Used as Comment
-------------------------------------------------------------------------------
rootdir Disk
vol1 Disk
The command completed successfully.
C:\Users\Administrator>
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>net view ntapvs2
Shared resources at ntapvs2
?
Share name Type Used as Comment
-------------------------------------------------------------------------------
rootdir Disk
vol1 Disk
The command completed successfully.
C:\Users\Administrator>net use * \\ntapvs2\vol1
Drive Z: is now connected to \\ntapvs2\vol1.
The command completed successfully.
C:\Users\Administrator>net use * \\ntapvs2\rootdir
Drive Y: is now connected to \\ntapvs2\rootdir.
The command completed successfully.
C:\Users\Administrator>dir z:
Volume in drive Z has no label.
Volume Serial Number is 8000-0405
Directory of Z:\
04/03/2013 08:06 AM <DIR> .
04/03/2013 08:06 AM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 398,331,904 bytes free
C:\Users\Administrator>dir y:
Volume in drive Y has no label.
Volume Serial Number is 8000-0404
Directory of Y:\
04/03/2013 08:09 AM <DIR> .
04/03/2013 08:09 AM <DIR> ..
04/03/2013 08:06 AM <DIR> vs2vol1
0 File(s) 0 bytes
3 Dir(s) 19,808,256 bytes free
C:\Users\Administrator>
netappu::> cifs share access-control show -vserver vs2
Share User/Group Access
Vserver Name Name Permission
-------------- ----------- --------------------------- -----------
vs2 rootdir Everyone Full_Control
vs2 vol1 Everyone Full_Control
2 entries were displayed.
netappu::> cifs share access-control modify -vserver vs2 -share vol1 -user-or-group Everyone Read
netappu::> cifs share access-control show -vserver vs2
Share User/Group Access
Vserver Name Name Permission
-------------- ----------- --------------------------- -----------
vs2 rootdir Everyone Full_Control
vs2 vol1 Everyone Read
2 entries were displayed.
netappu::> cifs share access-control modify -vserver vs2 -share vol1 -user-or-group Everyone Full_Control
netappu::> cifs home-directory search-path add -vserver vs2 -path /vs2vol1
netappu::> cifs home-directory search-path show
Vserver Position Path
----------- -------- -----------------
vs2 1 /vs2vol1
netappu::> cifs share create -vserver vs2 -share-name "~%w" -path "%w" -share-properties oplocks,browsable,changenotify,homedirectory
netappu::> cifs share show -vserver vs2
Vserver Share Path Properties Comment ACL
-------------- ------------- ----------------- ---------- -------- -----------
vs2 admin$ / browsable - -
vs2 ipc$ / browsable - -
vs2 rootdir / oplocks - Everyone / Full Control
browsable
changenotify
vs2 vol1 /vs2vol1 oplocks - Everyone / Full Control
browsable
changenotify
vs2 ~%w %w oplocks - Everyone / Full Control
browsable
changenotify
homedirectory
5 entries were displayed.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>net view ntapvs2
Shared resources at ntapvs2
?
Share name Type Used as Comment
-------------------------------------------------------------------------------
rootdir Disk
vol1 Disk
The command completed successfully.
C:\Users\Administrator>net use * \\ntapvs2\vol1
Drive Z: is now connected to \\ntapvs2\vol1.
The command completed successfully.
C:\Users\Administrator>net use * \\ntapvs2\rootdir
Drive Y: is now connected to \\ntapvs2\rootdir.
The command completed successfully.
C:\Users\Administrator>dir z:
Volume in drive Z has no label.
Volume Serial Number is 8000-0405
Directory of Z:\
04/03/2013 08:06 AM <DIR> .
04/03/2013 08:06 AM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 398,331,904 bytes free
C:\Users\Administrator>dir y:
Volume in drive Y has no label.
Volume Serial Number is 8000-0404
Directory of Y:\
04/03/2013 08:09 AM <DIR> .
04/03/2013 08:09 AM <DIR> ..
04/03/2013 08:06 AM <DIR> vs2vol1
0 File(s) 0 bytes
3 Dir(s) 19,808,256 bytes free
C:\Users\Administrator>net use
New connections will not be remembered.
Status Local Remote Network
-------------------------------------------------------------------------------
Y: \\ntapvs2\rootdir Microsoft Windows Network
Z: \\ntapvs2\vol1 Microsoft Windows Network
The command completed successfully.
C:\Users\Administrator>z:
Z:\>dir
Volume in drive Z has no label.
Volume Serial Number is 8000-0405
Directory of Z:\
04/03/2013 08:06 AM <DIR> .
04/03/2013 08:06 AM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 398,331,904 bytes free
Z:\>md administrator
Z:\>dir
Volume in drive Z has no label.
Volume Serial Number is 8000-0405
Directory of Z:\
04/03/2013 08:33 AM <DIR> .
04/03/2013 08:33 AM <DIR> ..
04/03/2013 08:33 AM <DIR> administrator
0 File(s) 0 bytes
3 Dir(s) 398,327,808 bytes free
Z:\>dir administrator
Volume in drive Z has no label.
Volume Serial Number is 8000-0405
Directory of Z:\administrator
04/03/2013 08:33 AM <DIR> .
04/03/2013 08:33 AM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 398,323,712 bytes free
Z:\>net view \\ntapvs2
Shared resources at \\ntapvs2
?
Share name Type Used as Comment
-------------------------------------------------------------------------------
rootdir Disk
vol1 Disk
~Administrator Disk
The command completed successfully.
Z:\>net use * \\ntapvs2\~administrator
Drive X: is now connected to \\ntapvs2\~administrator.
The command completed successfully.
Z:\>x:
X:\>dir
Volume in drive X has no label.
Volume Serial Number is 8000-0405
Directory of X:\
04/03/2013 08:33 AM <DIR> .
04/03/2013 08:33 AM <DIR> ..
0 File(s) 0 bytes
2 Dir(s) 398,323,712 bytes free
X:\>
netappu::> vserver export-policy rule show -vserver vs2
Policy Rule Access Client RO
Vserver Name Index Protocol Match Rule
------------ --------------- ------ -------- --------------------- ---------
vs2 default 1 any 0.0.0.0/0 any
PuTTY to Linux01
login as: root
root@linux01's password:
Last login: Thu Mar 29 12:47:22 2012 from 192.168.1.139
[root@linux01 ~]# mkdir /mnt/vs2
[root@linux01 ~]# mkdir /mnt/path01
[root@linux01 ~]# mount -t nfs 192.168.66.132:/ /mnt/vs2
[root@linux01 ~]# mount -t nfs 192.168.66.132:/vs2vol1 /mnt/path01
[root@linux01 ~]# cd /mnt/vs2/vs2vol1/administrator/
[root@linux01 administrator]# ls
[root@linux01 administrator]#
[admin@linux01 ~]$ cd /mnt/path01
[admin@linux01 path01]$ cp /usr/include/* .
cp: omitting directory `/usr/include/ao'
cp: omitting directory `/usr/include/python2.6'
[admin@linux01 path01]$ ls
administrator netapi.h
[admin@linux01 path01]$
netappu::> vol show -volume vs2_vol01 -fields used
(volume show)
vserver volume used
------- --------- -----
vs2 vs2_vol01 212KB
[admin@linux01 path01]$ cd /mnt/vs2/path01
-bash: cd: /mnt/vs2/path01: No such file or directory
[admin@linux01 path01]$
How to create and understand vserver name-mapping rules in Data ONTAP Cluster-Mode
KB ID: 1013831 Version: 1.0 Published date: 05/17/2012 Categories: Administration, Data ONTAP 8.0 Cluster-Mode, Data ONTAP 8.0.x Cluster-Mode, Data ONTAP 8.1 Cluster-Mode, Data ONTAP GX
Description
Data ONTAP Cluster-Mode can be accessed by Common Internet File System protocol (CIFS) and Network File System (NFS).
Name-mapping is used to map CIFS users to UNIX users and vice versa.
In the CIFS world, for example, it is known as NETAPP\jdoe, but in NFS (NIS) it is just jdoe. Name-mappings are rules (actually, regular expressions), which are interpreted by the authentication system during login to resolve your identity and gather the credentials you need to access your files. Name-mapping is the first step in the process of ensuring that the person logging in can get to their files, regardless of which protocol they use to access the file server.
Note the similarity of the CIFS and NIS usernames; many organizations that buy NetApp products use a naming convention such as this. If they do, they can use a very simple regular expression that just strips off the CIFS domain name, and the delimiting \ to leave just the username. In other cases, where the correspondence between user names is not direct, they may need to enter a mapping for each and every user. The name mapping rule syntax has extra features that can be used to adjust the case of user names, in case that is an issue.
Name mapping rules use regular expressions to match the source user name, and substitute the matched expression for the destination. The source and destination are specified as the mapping direction: Either Windows - UNIX, UNIX - Windows, or Kerb - UNIX. (Kerberos mappings are only necessary if using a Kerberized NFS UNIX client. Most UNIX clients are NOT Kerberized).
Procedure
Some general guidelines:
Rules are vserver specific. Each vserver can have its own independent set of name mapping rules.
Rules are evaluated in order starting with rules in the first position. The first rule to match the source name wins, and processing stops at that point.
If no rule matches before reaching the end of the list, then a default name will be used. The default name is protocol specific (both CIFS and NFS each have their own default) and it is specified during the setup of the protocol.
To specify the default UNIX user for CIFS, see the vserver cifs options modify command and specify the -default-unix-user field.
To specify the default Windows user for NFS, see the vserver nfs modify command and specify the -default-win-user field.
\ characters must be escaped when entering the rule; escape them with another "\". Windows uses "\" as a delimiter between Domain and Username. So, for example, if you wish to match a single backslash in the source name, put
in two backslashes as follows:
DOMAINNAME\\* -> \1
Use _ to force the matched destination name into lowercase.
Use ^ to force the matched destination name into uppercase.
Use & to force the matched destination name into initial case (the first character is capitalized, and all remaining characters are lower cased; for example, bob -> Bob).
Examples:
Mapping direction: Windows - UNIX
DOMAINNAME\\(.+) -> \1
This rule is by far, the most common rule you'll see in production. This matches a user whose Login ID consists of the literal characters DOMAINNAME\ plus, at least 1 character, up to any number of characters. The
literal text DOMAINNAME\ must occur as part of the name. The . represents any single character, and the + says, any number of characters may follow. Note that this rule is better than the similar
rule DOMAINNAME\\(*) because it requires at least 1 character to match. The * would match any user name, but would also match a user name without a single character, resulting in a 0 length target name
if a user typed in DOMAINNAME\\, for example.
Mapping direction: Windows - UNIX
DOMAINNAME\\(.)(.+) -> \_1\2This rule shows an example using multiple arguments. The first (.) will match any single character, and the translation rule on the UNIX side will cause the matched character to become lowercase. The second (.+) will match one or more characters, and the translation rule will cause it to be appended immediately after the first argument, without modification (i.e., no uppercasing or lowercasing). Note that this rule matches only usernames at least 2 characters in length.
Mapping direction: Windows - UNIX
(.+)\\(.+) -> \2This rule matches any Windows Domain Name, drops the domain and uses only the second matched parameter. This rule can be a little weird because it may result in multiple users being mapped to the same UNIX user. For example:
DOMAINNAME\\root -> rootDOMAINNAME2\\root -> rootIn this case, the user root from DOMAINNAME will be mapped to UNIX user root. If someone from DOMAINNAME2 connects with username root, they will also translate to user root.
Exe 10
Yahoo is the biggest NA user
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>cd "C:\Program Files\NetApp\Windows Host Utities"
The system cannot find the path specified.
C:\Users\Administrator>cd ..
C:\Users>cd ..
C:\>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\
09/12/2012 10:03 AM <DIR> inetpub
09/10/2012 10:09 PM <DIR> NETAPP
07/13/2009 08:20 PM <DIR> PerfLogs
04/01/2013 02:50 PM <DIR> Program Files
11/27/2012 04:34 AM <DIR> Program Files (x86)
04/03/2013 12:39 PM <DIR> temp
09/12/2012 08:01 AM <DIR> Users
11/28/2012 05:40 AM <DIR> Windows
12/01/2012 12:12 PM <DIR> _Files
0 File(s) 0 bytes
9 Dir(s) 14,900,826,112 bytes free
C:\>cd "Program Files"
C:\Program Files>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\Program Files
04/01/2013 02:50 PM <DIR> .
04/01/2013 02:50 PM <DIR> ..
09/07/2012 11:05 PM <DIR> Common Files
11/28/2012 05:40 AM <DIR> Hyper-V
11/20/2010 08:33 PM <DIR> Internet Explorer
03/20/2013 06:47 PM <DIR> Java
09/07/2012 04:22 PM <DIR> MSBuild
04/03/2013 12:39 PM <DIR> NetApp
11/28/2012 05:40 AM <DIR> Packaged Programs
09/13/2012 08:34 AM <DIR> ppedv
09/07/2012 04:22 PM <DIR> Reference Assemblies
09/07/2012 11:05 PM <DIR> VMware
09/13/2012 08:52 AM <DIR> Windows Live
11/20/2010 08:33 PM <DIR> Windows Mail
07/13/2009 10:37 PM <DIR> Windows NT
0 File(s) 0 bytes
15 Dir(s) 14,900,826,112 bytes free
C:\Program Files>cd Net*
C:\Program Files\NetApp>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\Program Files\NetApp
04/03/2013 12:39 PM <DIR> .
04/03/2013 12:39 PM <DIR> ..
04/01/2013 02:51 PM <DIR> OnCommand System Manager
04/03/2013 12:39 PM <DIR> Windows Host Utilities
0 File(s) 0 bytes
4 Dir(s) 14,900,826,112 bytes free
C:\Program Files\NetApp>cd W*
C:\Program Files\NetApp\Windows Host Utilities>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\Program Files\NetApp\Windows Host Utilities
04/03/2013 12:39 PM <DIR> .
04/03/2013 12:39 PM <DIR> ..
10/10/2011 12:15 PM 67,584 LinuxGuestConfig.iso
10/10/2011 12:15 PM 1,679,446 mbralign.exe
04/03/2013 12:39 PM <DIR> NetAppQCLI
04/27/2011 02:19 AM 212,207 NOTICE.PDF
10/10/2011 12:14 PM 63,488 san_version.exe
4 File(s) 2,022,725 bytes
3 Dir(s) 14,900,826,112 bytes free
C:\Program Files\NetApp\Windows Host Utilities>san_version
Windows(R) Host Utilities 6.0.4108.1216
NetApp version: 6.0
C:\Program Files\NetApp\Windows Host Utilities>
Iqn.1991-05.com.microsoft:nadc.netappu.com
Exe 11
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>cd "C:\Program Files\NetApp\Windows Host Utities"
The system cannot find the path specified.
C:\Users\Administrator>cd ..
C:\Users>cd ..
C:\>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\
09/12/2012 10:03 AM <DIR> inetpub
09/10/2012 10:09 PM <DIR> NETAPP
07/13/2009 08:20 PM <DIR> PerfLogs
04/01/2013 02:50 PM <DIR> Program Files
11/27/2012 04:34 AM <DIR> Program Files (x86)
04/03/2013 12:39 PM <DIR> temp
09/12/2012 08:01 AM <DIR> Users
11/28/2012 05:40 AM <DIR> Windows
12/01/2012 12:12 PM <DIR> _Files
0 File(s) 0 bytes
9 Dir(s) 14,900,826,112 bytes free
C:\>cd "Program Files"
C:\Program Files>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\Program Files
04/01/2013 02:50 PM <DIR> .
04/01/2013 02:50 PM <DIR> ..
09/07/2012 11:05 PM <DIR> Common Files
11/28/2012 05:40 AM <DIR> Hyper-V
11/20/2010 08:33 PM <DIR> Internet Explorer
03/20/2013 06:47 PM <DIR> Java
09/07/2012 04:22 PM <DIR> MSBuild
04/03/2013 12:39 PM <DIR> NetApp
11/28/2012 05:40 AM <DIR> Packaged Programs
09/13/2012 08:34 AM <DIR> ppedv
09/07/2012 04:22 PM <DIR> Reference Assemblies
09/07/2012 11:05 PM <DIR> VMware
09/13/2012 08:52 AM <DIR> Windows Live
11/20/2010 08:33 PM <DIR> Windows Mail
07/13/2009 10:37 PM <DIR> Windows NT
0 File(s) 0 bytes
15 Dir(s) 14,900,826,112 bytes free
C:\Program Files>cd Net*
C:\Program Files\NetApp>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\Program Files\NetApp
04/03/2013 12:39 PM <DIR> .
04/03/2013 12:39 PM <DIR> ..
04/01/2013 02:51 PM <DIR> OnCommand System Manager
04/03/2013 12:39 PM <DIR> Windows Host Utilities
0 File(s) 0 bytes
4 Dir(s) 14,900,826,112 bytes free
C:\Program Files\NetApp>cd W*
C:\Program Files\NetApp\Windows Host Utilities>dir
Volume in drive C has no label.
Volume Serial Number is C87A-766E
Directory of C:\Program Files\NetApp\Windows Host Utilities
04/03/2013 12:39 PM <DIR> .
04/03/2013 12:39 PM <DIR> ..
10/10/2011 12:15 PM 67,584 LinuxGuestConfig.iso
10/10/2011 12:15 PM 1,679,446 mbralign.exe
04/03/2013 12:39 PM <DIR> NetAppQCLI
04/27/2011 02:19 AM 212,207 NOTICE.PDF
10/10/2011 12:14 PM 63,488 san_version.exe
4 File(s) 2,022,725 bytes
3 Dir(s) 14,900,826,112 bytes free
C:\Program Files\NetApp\Windows Host Utilities>san_version
Windows(R) Host Utilities 6.0.4108.1216
NetApp version: 6.0
C:\Program Files\NetApp\Windows Host Utilities>ls /mnt/vs2/dataefficiency
'ls' is not recognized as an internal or external command,
operable program or batch file.
C:\Program Files\NetApp\Windows Host Utilities>net use t: \\ntapvs2\de
The command completed successfully.
C:\Program Files\NetApp\Windows Host Utilities>t:
T:\>dir
Volume in drive T has no label.
Volume Serial Number is 8000-0408
Directory of T:\
04/03/2013 02:03 PM <DIR> .
04/03/2013 02:03 PM <DIR> ..
04/03/2013 02:03 PM 57 datafile
1 File(s) 57 bytes
2 Dir(s) 20,795,392 bytes free
T:\>
Day 4
Is there a Clustered ONTAP version Like (0) Report Abuse Reply
michael cope Apr 4, 2013 4:27 AM (in response to adrianlowe)Not yet. Someone else is working on that and they've decided to hold off until 8.2 comes out rather than have to re-write it. The cDOT documentation set on the Support website has a Command Map document that compares 7-Mode commands with the equivalent cDOT commands
Exe 12
login: admin
Password:
netappu::> volume create -vserver vs2 -volume vs2_root_ls1 -aggr n01_aggr1 -type dp
[Job 60] Job succeeded: Successful
netappu::> snapmirror create -source-cluster netappu -source-vserver vs2 -source-volume vs2_root -destination-cluster netappu -destination-vserver vs2 -destination-volume vs2_root_ls1 -type ls
[Job 61] Job succeeded: SnapMirror: done appu://vs2/vs2_root_ls1.
netappu::> volume create -vserver vs2 -volume vs2_root_ls2 -aggr n02_aggr1 -type dp [Job 63] Job succeeded: Successful
netappu::> snapmirror create -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_ls2 -type ls [Job 64] Job succeeded: SnapMirror: done appu://vs2/vs2_root_ls2.
netappu::>
netappu::> snapmirror show
Source Destination Mirror Relationship Total
Path Type Path State Status Progress Healthy
------------- ---- ------------ ------------- -------------- ---------- -------
netappu://vs2/vs2_root
LS netappu://vs2/vs2_root_ls1
Uninitialized Idle - -
netappu://vs2/vs2_root_ls2
Uninitialized Idle - -
2 entries were displayed.
netappu::> snapmirror show -instance
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls1
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Uninitialized
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: -
Newest Snapshot Timestamp: -
Exported Snapshot: -
Exported Snapshot Timestamp: -
Healthy: -
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls2
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Uninitialized
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: -
Newest Snapshot Timestamp: -
Exported Snapshot: -
Exported Snapshot Timestamp: -
Healthy: -
Constituent Relationship: false
2 entries were displayed.
netappu::>
netappu::> snapmirror initialize-ls-set -source-path netappu://vs2/vs2_root
[Job 65] Job is queued: snapmirror initialize-ls-set for source netappu://vs2/vs2_root.
netappu::> snapmirror show
Source Destination Mirror Relationship Total
Path Type Path State Status Progress Healthy
------------- ---- ------------ ------------- -------------- ---------- -------
netappu://vs2/vs2_root
LS netappu://vs2/vs2_root_ls1
Uninitialized Transferring 68KB -
netappu://vs2/vs2_root_ls2
Uninitialized Transferring 68KB -
2 entries were displayed.
netappu::>
netappu::> vol create -vserver vs2 -vol vs2_root_dp1 -aggr n01_aggr1 -type dp
(volume create)
[Job 66] Job succeeded: Successful
netappu::> vol create -vserver vs2 -vol vs2_root_dp2 -aggr n02_aggr1 -type dp
(volume create)
[Job 67] Job succeeded: Successful
netappu::> snapmirror create -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp1 -type dp
[Job 68] Job succeeded: SnapMirror: done appu://vs2/vs2_root_dp1.
netappu::> snapmirror create -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp2 -type dp
[Job 70] Job succeeded: SnapMirror: done appu://vs2/vs2_root_dp2.
netappu::> snapmirror show
Source Destination Mirror Relationship Total
Path Type Path State Status Progress Healthy
------------- ---- ------------ ------------- -------------- ---------- -------
netappu://vs2/vs2_root
DP netappu://vs2/vs2_root_dp1
Uninitialized Idle - -
netappu://vs2/vs2_root_dp2
Uninitialized Idle - -
LS netappu://vs2/vs2_root_ls1
Snapmirrored Idle - true
netappu://vs2/vs2_root_ls2
Snapmirrored Idle - true
4 entries were displayed.
netappu::> snapmirror initialize -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp1
[Job 72] Job is queued: snapmirror initialize of destination netappu://vs2/vs2_root_dp1.
netappu::>
netappu::> vol snapshot show -vserver vs2 -vol vs2_root
(volume snapshot show)
---Blocks---
Vserver Volume Snapshot State Size Total% Used%
-------- ------- ------------------------------- -------- -------- ------ -----
vs2 vs2_root
daily.2013-04-04_0010 valid 68KB 0% 35%
hourly.2013-04-04_1005 valid 68KB 0% 35%
hourly.2013-04-04_1105 valid 68KB 0% 35%
hourly.2013-04-04_1205 valid 68KB 0% 35%
hourly.2013-04-04_1305 valid 68KB 0% 35%
hourly.2013-04-04_1405 valid 68KB 0% 35%
hourly.2013-04-04_1505 valid 68KB 0% 35%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
valid 60KB 0% 33%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443
valid 48KB 0% 28%
9 entries were displayed.
netappu::>
netappu::> snapmirror show -inst
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp1
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443
Newest Snapshot Timestamp: 04/04 15:54:43
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443
Exported Snapshot Timestamp: 04/04 15:54:43
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp2
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Uninitialized
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: -
Newest Snapshot Timestamp: -
Exported Snapshot: -
Exported Snapshot Timestamp: -
Healthy: -
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls1
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Newest Snapshot Timestamp: 04/04 15:44:41
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Exported Snapshot Timestamp: 04/04 15:44:41
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls2
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Newest Snapshot Timestamp: 04/04 15:44:41
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Exported Snapshot Timestamp: 04/04 15:44:41
Healthy: true
Constituent Relationship: false
4 entries were displayed.
netappu::>
netappu::> snapmirror initialize -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp2 -foreground true
[Job 73] Job succeeded: SnapMirror: done mirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_155826.
netappu::> snapmirror show -inst
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp1
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443
Newest Snapshot Timestamp: 04/04 15:54:43
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443
Exported Snapshot Timestamp: 04/04 15:54:43
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp2
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_155826
Newest Snapshot Timestamp: 04/04 15:58:26
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_155826
Exported Snapshot Timestamp: 04/04 15:58:26
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls1
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Newest Snapshot Timestamp: 04/04 15:44:41
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Exported Snapshot Timestamp: 04/04 15:44:41
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls2
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Newest Snapshot Timestamp: 04/04 15:44:41
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Exported Snapshot Timestamp: 04/04 15:44:41
Healthy: true
Constituent Relationship: false
4 entries were displayed.
netappu::>
netappu::> vol snapshot show -vserver vs2 -vol vs2_root
(volume snapshot show)
---Blocks---
Vserver Volume Snapshot State Size Total% Used%
-------- ------- ------------------------------- -------- -------- ------ -----
vs2 vs2_root
daily.2013-04-04_0010 valid 68KB 0% 36%
hourly.2013-04-04_1005 valid 68KB 0% 36%
hourly.2013-04-04_1105 valid 68KB 0% 36%
hourly.2013-04-04_1205 valid 68KB 0% 36%
hourly.2013-04-04_1305 valid 68KB 0% 36%
hourly.2013-04-04_1405 valid 68KB 0% 36%
hourly.2013-04-04_1505 valid 68KB 0% 36%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
valid 60KB 0% 33%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443
valid 60KB 0% 33%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_155826
valid 56KB 0% 32%
10 entries were displayed.
netappu::> snapmirror update -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp* -foreground true
[Job 74] Job succeeded: SnapMirror: done ror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_160147.
[Job 75] Job succeeded: SnapMirror: done _dp2.
2 entries were acted on.
netappu::> snapmirror show -inst
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp1
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_160147
Newest Snapshot Timestamp: 04/04 16:01:47
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_160147
Exported Snapshot Timestamp: 04/04 16:01:47
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp2
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_160157
Newest Snapshot Timestamp: 04/04 16:01:57
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_160157
Exported Snapshot Timestamp: 04/04 16:01:57
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls1
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Newest Snapshot Timestamp: 04/04 15:44:41
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Exported Snapshot Timestamp: 04/04 15:44:41
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls2
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Newest Snapshot Timestamp: 04/04 15:44:41
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
Exported Snapshot Timestamp: 04/04 15:44:41
Healthy: true
Constituent Relationship: false
4 entries were displayed.
netappu::>
netappu::> vol snapshot show -vserver vs2 -vol vs2_root
(volume snapshot show)
---Blocks---
Vserver Volume Snapshot State Size Total% Used%
-------- ------- ------------------------------- -------- -------- ------ -----
vs2 vs2_root
daily.2013-04-04_0010 valid 68KB 0% 35%
hourly.2013-04-04_1005 valid 68KB 0% 35%
hourly.2013-04-04_1105 valid 68KB 0% 35%
hourly.2013-04-04_1205 valid 68KB 0% 35%
hourly.2013-04-04_1305 valid 68KB 0% 35%
hourly.2013-04-04_1405 valid 68KB 0% 35%
hourly.2013-04-04_1505 valid 68KB 0% 35%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441
valid 60KB 0% 33%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_160147
valid 68KB 0% 35%
snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_160157
valid 72KB 0% 37%
10 entries were displayed.
netappu::>
Task 3
netappu::> vol create -vserver vs2 -vol vs2_vol03 -aggr n01_aggr1 -junction-path /vs2vol3
(volume create)
[Job 76] Job succeeded: Successful
Notice: Volume vs2_vol03 now has a mount point from volume vs2_root. The load
sharing (LS) mirrors of volume vs2_root have no replication schedule.
Volume vs2_vol03 will not be visible in the global namespace until the
LS mirrors of volume vs2_root have been updated.
login as: root
root@linux01's password:
Last login: Wed Apr 3 14:04:00 2013 from nadc.netappu.com
[root@linux01 ~]# cd /mnt/vs2
[root@linux01 vs2]# ls
dataefficiency vs2vol1
[root@linux01 vs2]#
netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root
[Job 77] Job is queued: snapmirror update-ls-set for source netappu://vs2/vs2_root.
[root@linux01 vs2]# ls /mnt/vs2
dataefficiency vs2vol1 vs2vol3
[root@linux01 vs2]#
[root@linux01 vs2]# touch /mnt/vs2/myfile
touch: cannot touch `/mnt/vs2/myfile': Read-only file system
[root@linux01 vs2]#
[root@linux01 vs2]# mkdir /mnt/vs2rw
[root@linux01 vs2]# mount 192.168.66.132:/.admin /mnt/vs2rw
[root@linux01 vs2]# touch /mnt/vs2/myfile
touch: cannot touch `/mnt/vs2/myfile': Read-only file system
[root@linux01 vs2]# ls /mnt/vs2rw/myfile
ls: cannot access /mnt/vs2rw/myfile: No such file or directory
[root@linux01 vs2]# mount 192.168.66.132:/ .admin /mnt/vs2rw
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
One can change the type of mount containing the directory dir:
mount --make-shared dir
mount --make-slave dir
mount --make-private dir
mount --make-unbindable dir
One can change the type of all the mounts in a mount subtree
containing the directory dir:
mount --make-rshared dir
mount --make-rslave dir
mount --make-rprivate dir
mount --make-runbindable dir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
[root@linux01 vs2]#
[root@linux01 vs2]# ls /mnt/vs2/myfile
ls: cannot access /mnt/vs2/myfile: No such file or directory
[root@linux01 vs2]#
netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root
[Job 77] Job is queued: snapmirror update-ls-set for source netappu://vs2/vs2_root.
netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root -foreground true
[Job 78] Job succeeded: SnapMirror: done irror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_161534.
[root@linux01 vs2]# ls /mnt/vs2/myfile
ls: cannot access /mnt/vs2/myfile: No such file or directory
[root@linux01 vs2]#
Task 4
netappu::> job schedule show
Name Type Description
----------- --------- -----------------------------------------------------
5min cron @:00,:05,:10,:15,:20,:25,:30,:35,:40,:45,:50,:55
8hour cron @2:15,10:15,18:15
RepositoryBalanceMonitorJobSchedule
interval Every 10m
avUpdateSchedule
cron @2:00
daily cron @0:10
hourly cron @:05
weekly cron Sun@0:15
7 entries were displayed.
netappu::> snapmirror modify -destination-path netappu://vs2/vs2_root_ls1 -schedule 5min
[Job 79] Job is queued: snapmirror modify the relationship with destination netappu://vs2/vs2_root_ls1.
netappu::> snapmirror show -destination-path netappu://vs2/vs2_root_ls* -instance
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls1
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: 5min
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Transferring
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Newest Snapshot Timestamp: 04/04 16:20:01
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Exported Snapshot Timestamp: 04/04 16:20:01
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls2
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: 5min
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Newest Snapshot Timestamp: 04/04 16:20:01
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Exported Snapshot Timestamp: 04/04 16:20:01
Healthy: false
Constituent Relationship: false
2 entries were displayed.
netappu::>
netappu::> snapmirror modify -destination-path netappu://vs2/vs2_root_dp1 -schedule hourly
[Job 80] Job is queued: snapmirror modify the relationship with destination netappu://vs2/vs2_root_dp1.
netappu::> snapmirror show -instance
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp1
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: hourly
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_160147
Newest Snapshot Timestamp: 04/04 16:01:47
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_160147
Exported Snapshot Timestamp: 04/04 16:01:47
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_dp2
Relationship Type: DP
Managing Vserver: vs2
SnapMirror Schedule: -
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_160157
Newest Snapshot Timestamp: 04/04 16:01:57
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_160157
Exported Snapshot Timestamp: 04/04 16:01:57
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls1
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: 5min
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Newest Snapshot Timestamp: 04/04 16:20:01
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Exported Snapshot Timestamp: 04/04 16:20:01
Healthy: true
Constituent Relationship: false
Source Path: netappu://vs2/vs2_root
Destination Path: netappu://vs2/vs2_root_ls2
Relationship Type: LS
Managing Vserver: vs2
SnapMirror Schedule: 5min
Tries Limit: 8
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Transfer Snapshot: -
Snapshot Progress: -
Total Progress: -
Snapshot Checkpoint: -
Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Newest Snapshot Timestamp: 04/04 16:20:01
Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162001
Exported Snapshot Timestamp: 04/04 16:20:01
Healthy: true
Constituent Relationship: false
4 entries were displayed.
netappu::>
netappu::> system date show
Node Date Timezone
--------- ------------------- -------------------------
netappu-01
4/4/2013 16:22:54 Etc/UTC
netappu-02
4/4/2013 16:28:21 Etc/UTC
2 entries were displayed.
Task 5
netappu::> vol show -vol vs2_root*
(volume show)
Error: Ambiguous argument. Possible matches include:
-volume
-volume-style
netappu::> vol show -volume vs2_root*
(volume show)
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
vs2 vs2_root n02_aggr1 online RW 20MB 18.88MB 5%
vs2 vs2_root_dp1 n01_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_dp2 n02_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_ls1 n01_aggr1 online LS 20MB 18.88MB 5%
vs2 vs2_root_ls2 n02_aggr1 online LS 20MB 18.88MB 5%
5 entries were displayed.
netappu::> snapmirror promote -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_ls1
Warning: Promote will delete the read-write volume netappu://vs2/vs2_root and
replace it with netappu://vs2/vs2_root_ls1.
Do you want to continue? {y|n}: y
[Job 81] Job succeeded: SnapMirror: done t_ls1.
netappu::> vol show -volume vs2_root*
(volume show)
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
vs2 vs2_root_dp1 n01_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_dp2 n02_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_ls1 n01_aggr1 online RW 20MB 18.88MB 5%
vs2 vs2_root_ls2 n02_aggr1 online LS 20MB 18.88MB 5%
4 entries were displayed.
netappu::> snapmirror show
Source Destination Mirror Relationship Total
Path Type Path State Status Progress Healthy
------------- ---- ------------ ------------- -------------- ---------- -------
netappu://vs2/vs2_root_ls1
DP netappu://vs2/vs2_root_dp1
Snapmirrored Idle - true
netappu://vs2/vs2_root_dp2
Snapmirrored Idle - true
LS netappu://vs2/vs2_root_ls2
Snapmirrored Idle - true
3 entries were displayed.
netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root_ls1 -foreground true
[Job 82] Job succeeded: SnapMirror: done irror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162940.
Task 6
login: admin
(cluster setup)
Welcome to the cluster setup wizard.
You can enter the following commands at any time:
"help" or "?" - if you want to have a question clarified,
"back" - if you want to change previously answered questions, and
"exit" or "quit" - if you want to quit the cluster setup wizard.
Any changes you made before quitting will be saved.
You can return to cluster setup at any time by typing "cluster setup".
To accept a default or omit a question, do not enter a value.
Do you want to create a new cluster or join an existing cluster? {create, join}:
create
System Defaults:
Private cluster network ports [e0a,e0b].
Cluster port MTU values will be set to 1500.
Cluster interface IP addresses will be automatically generated.
Do you want to use these defaults? {yes, no} [yes]:
It can take several minutes to create cluster interfaces...
Step 1 of 5: Create a Cluster
You can type "back", "exit", or "help" at any question.
Enter the cluster name: other
Enter the cluster base license key: VMZIVZGKWVMADF
Creating cluster other
Starting cluster support services .....
Cluster other has been created.
Step 2 of 5: Add Feature License Keys
You can type "back", "exit", or "help" at any question.
Enter an additional license key []: BAKJZZGKWVMADF
NFS License was added.
Enter an additional license key []: RQQQXZGKWVMADF
CIFS License was added.
Enter an additional license key []: NUHYZZGKWVMADF
SnapMirror Data Protection License was added.
Enter an additional license key []: DLOFYZGKWVMADF
SnapRestore License was added.
Enter an additional license key []:
Step 3 of 5: Set Up a Vserver for Cluster Administration
You can type "back", "exit", or "help" at any question.
Enter the cluster administrator's (username "admin") password:
Retype the password:
Enter the cluster management interface port [e0c]:
Enter the cluster management interface IP address: 192.168.66.125
Enter the cluster management interface netmask: 255.255.255.0
Enter the cluster management interface default gateway: 192.168.66.1
A cluster management interface on port e0c with IP address 192.168.66.125 has been created. You can use this address to connect to and manage the cluster.
Enter the DNS domain names: netappu.com
Enter the name server IP addresses: 192.168.66.1
DNS lookup for the admin Vserver will use the netappu.com domain.
Step 4 of 5: Configure Storage Failover (SFO)
You can type "back", "exit", or "help" at any question.
SFO is licensed.
SFO will be enabled when the partner joins the cluster.
Step 5 of 5: Set Up the Node
You can type "back", "exit", or "help" at any question.
Where is the controller located []: netappu
Enter the node management interface port [e0f]:
Enter the node management interface IP address: 192.168.66.126
Enter the node management interface netmask: 255.255.255.0
Enter the node management interface default gateway: 192.168.66.2
A node management interface on port e0f with IP address 192.168.66.126 has been created.
Cluster setup is now complete. To begin storing and serving data on this
cluster, you must complete the following additional tasks if they have
not already been completed:
1) Join additional nodes to the cluster by running "cluster setup" on
those nodes.
2) If in a HA configuration, verify that storage failover is enabled by
running the "storage failover show" command.
3) Create a Vserver by running the "vserver setup" command.
You can access your cluster to complete these tasks by:
1) Using the NetApp System Manager to manage cluster other at 192.168.66.125.
NetApp System Manager must be at version 2.0 or above.
You can download NetApp System Manager from
http://support.netapp.com
2) Logging in to the cluster by using SSH (secure shell) from your work station:
Exiting the cluster setup wizard.
login:
login: admin
(cluster setup)
Welcome to the cluster setup wizard.
You can enter the following commands at any time:
"help" or "?" - if you want to have a question clarified,
"back" - if you want to change previously answered questions, and
"exit" or "quit" - if you want to quit the cluster setup wizard.
Any changes you made before quitting will be saved.
You can return to cluster setup at any time by typing "cluster setup".
To accept a default or omit a question, do not enter a value.
Do you want to create a new cluster or join an existing cluster? {create, join}:
create
System Defaults:
Private cluster network ports [e0a,e0b].
Cluster port MTU values will be set to 1500.
Cluster interface IP addresses will be automatically generated.
Do you want to use these defaults? {yes, no} [yes]:
It can take several minutes to create cluster interfaces...
Step 1 of 5: Create a Cluster
You can type "back", "exit", or "help" at any question.
Enter the cluster name: other
Enter the cluster base license key: VMZIVZGKWVMADF
Creating cluster other
Starting cluster support services .....
Cluster other has been created.
Step 2 of 5: Add Feature License Keys
You can type "back", "exit", or "help" at any question.
Enter an additional license key []: BAKJZZGKWVMADF
NFS License was added.
Enter an additional license key []: RQQQXZGKWVMADF
CIFS License was added.
Enter an additional license key []: NUHYZZGKWVMADF
SnapMirror Data Protection License was added.
Enter an additional license key []: DLOFYZGKWVMADF
SnapRestore License was added.
Enter an additional license key []:
Step 3 of 5: Set Up a Vserver for Cluster Administration
You can type "back", "exit", or "help" at any question.
Enter the cluster administrator's (username "admin") password:
Retype the password:
Enter the cluster management interface port [e0c]:
Enter the cluster management interface IP address: 192.168.66.125
Enter the cluster management interface netmask: 255.255.255.0
Enter the cluster management interface default gateway: 192.168.66.2
A cluster management interface on port e0c with IP address 192.168.66.125 has been created. You can use this address to connect to and manage the cluster.
Enter the DNS domain names: netappu.com
Enter the name server IP addresses: 192.168.66.1
DNS lookup for the admin Vserver will use the netappu.com domain.
Step 4 of 5: Configure Storage Failover (SFO)
You can type "back", "exit", or "help" at any question.
SFO is licensed.
SFO will be enabled when the partner joins the cluster.
Step 5 of 5: Set Up the Node
You can type "back", "exit", or "help" at any question.
Where is the controller located []: netappu
Enter the node management interface port [e0f]:
Enter the node management interface IP address: 192.168.66.127
Enter the node management interface netmask: 255.255.255.0
Enter the node management interface default gateway: 192.168.66.2
A node management interface on port e0f with IP address 192.168.66.127 has been created.
Cluster setup is now complete. To begin storing and serving data on this
cluster, you must complete the following additional tasks if they have
not already been completed:
1) Join additional nodes to the cluster by running "cluster setup" on
those nodes.
2) If in a HA configuration, verify that storage failover is enabled by
running the "storage failover show" command.
3) Create a Vserver by running the "vserver setup" command.
You can access your cluster to complete these tasks by:
1) Using the NetApp System Manager to manage cluster other at 192.168.66.125.
NetApp System Manager must be at version 2.0 or above.
You can download NetApp System Manager from
http://support.netapp.com
2) Logging in to the cluster by using SSH (secure shell) from your work station:
Exiting the cluster setup wizard.
login:
Re-join node3/4
login: admin
(cluster setup)
Welcome to the cluster setup wizard.
You can enter the following commands at any time:
"help" or "?" - if you want to have a question clarified,
"back" - if you want to change previously answered questions, and
"exit" or "quit" - if you want to quit the cluster setup wizard.
Any changes you made before quitting will be saved.
You can return to cluster setup at any time by typing "cluster setup".
To accept a default or omit a question, do not enter a value.
Do you want to create a new cluster or join an existing cluster? {create, join}:
join
System Defaults:
Private cluster network ports [e0a,e0b].
Cluster port MTU values will be set to 1500.
Cluster interface IP addresses will be automatically generated.
Do you want to use these defaults? {yes, no} [yes]:
It can take several minutes to create cluster interfaces...
Step 1 of 3: Join an Existing Cluster
You can type "back", "exit", or "help" at any question.
Enter the name of the cluster you would like to join {netappu, other}:
other
Joining cluster other
Starting cluster support services ....
This node has joined the cluster other.
Step 2 of 3: Configure Storage Failover (SFO)
You can type "back", "exit", or "help" at any question.
SFO is licensed.
SFO will be enabled when the partner joins the cluster.
Step 3 of 3: Set Up the Node
You can type "back", "exit", or "help" at any question.
Enter the node management interface port [e0f]:
Enter the node management interface IP address: 192.168.66.126
Enter the node management interface netmask [255.255.255.0]:
Enter the node management interface default gateway [192.168.66.2]:
A node management interface on port e0f with IP address 192.168.66.126 has been created.
Cluster setup is now complete. To begin storing and serving data on this
cluster, you must complete the following additional tasks if they have
not already been completed:
1) Join additional nodes to the cluster by running "cluster setup" on
those nodes.
2) If in a HA configuration, verify that storage failover is enabled by
running the "storage failover show" command.
3) Create a Vserver by running the "vserver setup" command.
You can access your cluster to complete these tasks by:
1) Using the NetApp System Manager to manage cluster other at 192.168.66.125.
NetApp System Manager must be at version 2.0 or above.
You can download NetApp System Manager from
http://support.netapp.com
2) Logging in to the cluster by using SSH (secure shell) from your work station:
Exiting the cluster setup wizard.
login:
Exe 14
netappu::> vol show
(volume show)
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
netappu-01
vol0 aggr0 online RW 851.5MB 505.2MB 40%
netappu-02
vol0 aggr0_netappu_02_0
online RW 851.5MB 475.8MB 44%
vs1 volume1 n01_aggr1 online RW 20MB 18.88MB 5%
vs1 volume2 n02_aggr1 online RW 400GB 244.1MB 99%
vs1 vs1root n01_aggr1 online RW 20MB 18.88MB 5%
vs2 dataefficiency
n02_aggr1 online RW 100MB 58.26MB 41%
vs2 dataefficiency_clone_splited
n02_aggr1 online RW 100MB 59.13MB 40%
vs2 vs2_root_dp1 n01_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_dp2 n02_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_ls1 n01_aggr1 online RW 20MB 18.88MB 5%
vs2 vs2_root_ls2 n02_aggr1 online LS 20MB 18.88MB 5%
vs2 vs2_vol01 n01_aggr1 online RW 400MB 379.8MB 5%
vs2 vs2_vol03 n01_aggr1 online RW 20MB 18.89MB 5%
vsISCSI1 lun_vsISCSI1_1_vol
n01_aggr1 online RW 123.3MB 20.76MB 83%
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
vsISCSI1 vsISCSI1_root
n01_aggr1 online RW 20MB 18.89MB 5%
15 entries were displayed.
netappu::> vol snapshot show -volume vs2_vol01
(volume snapshot show)
---Blocks---
Vserver Volume Snapshot State Size Total% Used%
-------- ------- ------------------------------- -------- -------- ------ -----
vs2 vs2_vol01
daily.2013-04-04_0010 valid 84KB 0% 26%
hourly.2013-04-04_1405 valid 88KB 0% 27%
hourly.2013-04-04_1505 valid 88KB 0% 27%
hourly.2013-04-04_1605 valid 88KB 0% 27%
hourly.2013-04-04_1705 valid 88KB 0% 27%
hourly.2013-04-04_1805 valid 88KB 0% 27%
hourly.2013-04-04_1905 valid 88KB 0% 27%
7 entries were displayed.
netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destination-aggregate n01_aggr1 -foreground true
(volume move start)
Volume vs2_vol01 is already on aggregate n01_aggr1.
netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destination-aggregate n02_aggr1 -foreground true
(volume move start)
Error: command failed: There is 244.1MB of available space on the aggregate
n02_aggr1 which is not enough to accommodate a volume.
netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destination-aggregate n02_aggr1 -foreground true
netappu::> job show
Owning
Job ID Name Vserver Node State
------ -------------------- ---------- -------------- ----------
1 Certificate Expiry Check
netappu - Queued
Description: Certificate Expiry Check
2 CLUSTER BACKUP AUTO 8hour
netappu - Queued
Description: Cluster Backup Job
3 CLUSTER BACKUP AUTO daily
netappu - Queued
Description: Cluster Backup Job
4 CLUSTER BACKUP AUTO weekly
netappu - Queued
Description: Cluster Backup Job
5 Vol Reaper netappu - Queued
Description: Vol Reaper Job
62 SnapMirrorDaemon_4_2147484676
netappu netappu-01 Dormant
Description: Snapmirror Daemon for 4_2147484676
69 SnapMirrorDaemon_4_2147484684
netappu netappu-01 Dormant
Description: Snapmirror Daemon for 4_2147484684
Owning
Job ID Name Vserver Node State
------ -------------------- ---------- -------------- ----------
71 SnapMirrorDaemon_4_2147484685
netappu netappu-01 Dormant
Description: Snapmirror Daemon for 4_2147484685
8 entries were displayed.
netappu::> job show -id 71
Owning
Job ID Name Vserver Node State
------ -------------------- ---------- -------------- ----------
71 SnapMirrorDaemon_4_2147484685
netappu netappu-01 Dormant
Description: Snapmirror Daemon for 4_2147484685
netappu::>
Task 2
netappu::> stor aggr show
(storage aggregate show)
Aggregate Size Available Used% State #Vols Nodes RAID Status
--------- -------- --------- ----- ------- ------ ---------------- ------------
aggr0 900MB 30.74MB 97% online 1 netappu-01 raid_dp,
normal
aggr0_netappu_02_0
900MB 30.74MB 97% online 1 netappu-02 raid_dp,
normal
n01_aggr1 2.64GB 1.91GB 28% online 8 netappu-01 raid_dp,
normal
n02_aggr1 2.64GB 240.1MB 91% online 5 netappu-01 raid_dp,
normal
n02_fp1 7.03GB 7.03GB 0% online 0 netappu-02 raid_dp,
hybrid,
normal
5 entries were displayed.
netappu::> vol show -aggr n01_aggr1
(volume show)
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
vs1 volume1 n01_aggr1 online RW 20MB 18.88MB 5%
vs1 vs1root n01_aggr1 online RW 20MB 18.88MB 5%
vs2 vs2_root_dp1 n01_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_ls1 n01_aggr1 online RW 20MB 18.88MB 5%
vs2 vs2_vol01 n01_aggr1 online RW 400MB 379.8MB 5%
vs2 vs2_vol03 n01_aggr1 online RW 20MB 18.89MB 5%
vsISCSI1 lun_vsISCSI1_1_vol
n01_aggr1 online RW 123.3MB 20.76MB 83%
vsISCSI1 vsISCSI1_root
n01_aggr1 online RW 20MB 18.89MB 5%
8 entries were displayed.
netappu::>
netappu::> stor aggr create -aggr n01_aggr1_new -diskcount 6
(storage aggregate create)
[Job 86] Job succeeded: DONE
netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destination-aggregate n01_aggr1_new
(volume move start)
[Job 87] Job is queued: Move "vs2_vol01" in Vserver "vs2" to aggregate "n01_aggr1_new". Use the "volume move show -vserver vs2 -volume vs2_vol01" command t
netappu::> stor aggr show n01_aggr1
(storage aggregate show)
Aggregate: n01_aggr1
Size: 2.64GB
Used Size: 347.1MB
Used Percentage: 13%
Available Size: 2.30GB
State: online
Nodes: netappu-01
Number Of Disks: 5
Checksum Style: block
Disks: netappu-01:v5.19,
netappu-01:v5.20,
netappu-01:v5.21,
netappu-01:v5.22,
netappu-01:v5.24
Number Of Volumes: 7
Plexes: /n01_aggr1/plex0(online)
RAID Groups: /n01_aggr1/plex0/rg0 (block)
RAID Type: raid_dp
Max RAID Size: 16
RAID Status: raid_dp, normal
Checksum Enabled: true
Checksum Status: active
Inconsistent: false
Hybrid: false
Total Hybrid Cache Size: 0B
Automatic Snapshot Deletion: on
HA Policy: sfo
Free Space Reallocation: off
Space Reserved for Snapshot Copies: 0%
Hybrid Enabled: false
Volume Style: flex
Has Mroot Volume: false
Has Partner Node Mroot Volume: false
Is Root: false
Block Type: 64-bit
Space Used By metadata for Volume Efficiency: 0B
netappu::> stor aggr delete n01_aggr1
(storage aggregate delete)
Warning: Are you sure you want to destroy aggregate "n01_aggr1"?
{y|n}: y
Error: command failed: It is not allowed to delete an aggregate that contains
volume(s). Please first remove all of the volumes on the aggregate.
netappu::> stor aggr rename -aggr n01_aggr1_new -newname n01_aggr1
(storage aggregate rename)
Error: comma netappu::> stor aggr rename -aggr n01_aggr1_new -newname n01_aggr2
(storage aggregate rename)
[Job 88] Job succeeded: DONE
nd failed: An aggregate already uses n01_aggr1 as name
Task 3
netappu::> net int modify -vserver vs2 -lif
(network interface modify)
Error: Missing value for -lif.
netappu::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
netappu
cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true
netappu-01
clus1 up/up 169.254.144.226/16 netappu-01 e0a true
clus2 up/up 169.254.124.226/16 netappu-01 e0b true
mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true
netappu-02
clus1 up/up 169.254.89.72/16 netappu-02 e0a true
clus2 up/up 169.254.244.76/16 netappu-02 e0b true
mgmt1 up/up 192.168.66.122/24 netappu-02 e0f true
vs1
data1 up/up 192.168.66.131/24 netappu-02 e0d true
vs2
vs2nas1 up/up 192.168.66.132/24 netappu-02 e0d true
vs2nas2 up/up 192.168.66.133/24 netappu-01 e0d true
vsISCSI1
netappu-01_iscsi_if1
up/up 192.168.66.134/24 netappu-01 e0c true
netappu-01_iscsi_if2
up/up 192.168.66.135/24 netappu-01 e0d true
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
vsISCSI1
netappu-02_iscsi_if1
up/up 192.168.66.136/24 netappu-02 e0c true
netappu-02_iscsi_if2
up/up 192.168.66.137/24 netappu-02 e0d true
14 entries were displayed.
netappu::> net int modify -vserver vs2 -lif data1 -firewall-policy mgmt
(network interface modify)
Error: command failed: entry doesn't exist
netappu::> net int modify -vserver vs2 -lif vs2nas1 -firewall-policy mgmt
(network interface modify)
netappu::>
login as: vs2admin
Using keyboard-interactive authentication.
Password:
vs2::> cluster show
Error: "cluster" is not a recognized command
vs2::>
vs2::> vol show
(volume show)
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
vs2 dataefficiency
n02_aggr1 online RW 100MB 58.26MB 41%
vs2 dataefficiency_clone_splited
n02_aggr1 online RW 100MB 59.13MB 40%
vs2 vs2_root_dp1 n01_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_dp2 n02_aggr1 online DP 20MB 18.88MB 5%
vs2 vs2_root_ls1 n01_aggr1 online RW 20MB 18.88MB 5%
vs2 vs2_root_ls2 n02_aggr1 online LS 20MB 18.88MB 5%
vs2 vs2_vol01 n01_aggr2 online RW 400MB 379.8MB 5%
vs2 vs2_vol03 n01_aggr1 online RW 20MB 18.89MB 5%
8 entries were displayed.
vs2::> vol modify -volume vs2_vol01 -comment "modified by vs2admin"
(volume modify)
vs2::> vol show -volume vs2_vol01 -instance
(volume show)
Vserver Name: vs2
Volume Name: vs2_vol01
Aggregate Name: n01_aggr2
Volume Size: 400MB
Volume Data Set ID: 1039
Volume Master Data Set ID: 2147484677
Volume State: online
Volume Type: RW
Volume Style: flex
Is Cluster-Mode Volume: true
Is Constituent Volume: false
Export Policy: default
User ID: 0
Group ID: 1
Security Style: unix
UNIX Permissions: ---rwxrwxrwx
Junction Path: /vs2vol1
Junction Path Source: RW_volume
Junction Active: true
Junction Parent Volume: vs2_root_ls1
Comment: modified by vs2admin
Available Size: 379.8MB
Total User-Visible Size: 380MB
Used Size: 252KB
Used Percentage: 5%
Autosize Enabled (for flexvols only): false
Maximum Autosize (for flexvols only): 480MB
Autosize Increment (for flexvols only): 20MB
Total Files (for user-visible data): 12150
Files Used (for user-visible data): 99
Space Guarantee Style: volume
Space Guarantee in Effect: true
Space Reserved for Snapshots: 5%
Snapshot Reserve Used: 3%
Snapshot Policy: default
Creation Time: Wed Apr 03 15:06:12 2013
Clone Volume: false
Anti-Virus On-Access Policy: default
NVFAIL Option: off
Is File System Size Fixed: false
Extent Option: off
Reserved Space for Overwrites: 0B
Fractional Reserve: 0%
Snapshot Cloning Dependency: off
Primary Space Management Strategy: volume_grow
Read Reallocation Option: off
Naming Scheme for Automatic Snapshots: create_time
Inconsistency in the File System: false
Is Volume Quiesced (On-Disk): false
Is Volume Quiesced (In-Memory): false
Volume Contains Shared or Compressed Data: false
Space Saved by Storage Efficiency: 0B
Percentage Saved by Storage Efficiency: 0%
Space Saved by Deduplication: 0B
Percentage Saved by Deduplication: 0%
Space Shared by Deduplication: 0B
Space Saved by Compression: 0B
Percentage Space Saved by Compression: 0%
Block Type: 64-bit
Constituent Volume Role: -
Is Volume Moving: false
Is Volume Move in Cutover Phase: false
Flash Pool Caching Eligibility: read-write
Flash Pool Write Caching Ineligibility Reason: -
vs2::>
login as: vs2intern
Using keyboard-interactive authentication.
Password:
vs2::> network port show
Error: "port" is not a recognized command
vs2::> network int show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
vs2
vs2nas1 up/up 192.168.66.132/24 netappu-02 e0d true
vs2nas2 up/up 192.168.66.133/24 netappu-01 e0d true
2 entries were displayed.
vs2::> vol modify -volume vs2_vol01 -comment "modified by vs2intern"
Error: "modify" is not a recognized command
vs2::>