c h a p t e r 6 t h e o r y o f c o s t
TRANSCRIPT
Theory of Cost
Zulkhairi Nisa-Sg Petani Campus 1
CHAPTER 6
Definition of Production Cost
Production cost means:a. Amount of money spent in the process of
production. b. Such an examples:
Wages to labour Interest on capital Rent to land owners
2Zulkhairi Nisa-Sg Petani Campus
Cost Conceptsi) Implicit cost (Economic Cost)
The value of input services that are used in production which are not purchased in the market.
ii) Explicit cost (Economic Cost / Accounting Cost)
The value of resources purchased for production
iii) Opportunity cost (Economic Cost)
Value of the best alternative forgone
iv) Social cost (Economic Cost)
The total cost of production of a product and includes direct and indirect costs incurred by the society. Ex: water pollution from industrial waste contaminating rivers.
3Zulkhairi Nisa-Sg Petani Campus
Production Costs in The Short Run
Types of cost in short-run
Fixed Cost
Variable Cost
Total Cost
4Zulkhairi Nisa-Sg Petani Campus
Production costs in the short run
1. Total Fixed Cost (TFC)Refers to money spent on fixed input.
Total fixed cost has no relationship with output.
Total fixed cost remains constant throughout the production period even though output changes.
TFC incurred before any production or business takes place. Examples rent on building.
5Zulkhairi Nisa-Sg Petani Campus
2. Total Variable Cost (TVC)Money spent on variable inputs.Refers to the cost of input that change with output. When output is zero, total variable cost is also zero. As the output increases, the TVC will also
increases. The TVC changes in response to a changes in
quantity or output. Examples; raw materials, payment to workers.
6Zulkhairi Nisa-Sg Petani Campus
3. Total Cost (TC)Is the sum of costs of all inputs: fixed and
variable inputs used to produce goods and services.
In other words, the total cost is an aggregate expenditure incurred by a firm in producing goods and services.
Total cost defined as = TFC +TVC
7Zulkhairi Nisa-Sg Petani Campus
Relationship between output, TFC, TVC and TC
Cost
Output
8
K3
K2
K1
Q1
Zulkhairi Nisa-Sg Petani Campus
TFC
TVCTC
Important Concepts
i. Average Variable Cost (AVC) is the variable cost per unit of output
ii. Average Fixed Cost (AFC) is the fixed cost per unit of output
9
AFC=TFC/Q; where Q is the quantity output
AVC=TVC/Q; where Q is the quantity output
Zulkhairi Nisa-Sg Petani Campus
iii. Average Total Cost (ATC or AC) is the total cost incurred per unit output and it is also known as unit cost or average cost.
or
iv. Marginal cost (MC) is the change in total cost associated with producing an additional unit of output. Since TC is a summation of TFC and TVC, any change in total cost necessarily emerges from changes in either fixed or variable cost.
10
MC=TC/Q = TVC/Q; where TFC=0
ATC=TC/Q; where Q is the quantity output
ATC=AVC + AFC
Zulkhairi Nisa-Sg Petani Campus
TotalCost
AverageCost
Marginalcost
Output TFC TVC TC (TFC+TVC)
AFC (TFC/Q)
AVC
(TVC/Q)ATC
(TC/Q)MC
(TC/Q)
0 20 0 20 - - - -
1 20 15 35 20 15 35 15
2 20 25 45 10 12.5 22.50 10
3 20 30 50 6.67 10 16.67 5
4 20 35 55 5 8.75 13.75 5
5 20 45 65 4 9 13 10
6 20 65 85 3.33 10.83 14.16 20
7 20 90 110 2.86 12.86 15.72 25
11Zulkhairi Nisa-Sg Petani Campus
Machine Labour TPL APL (TP/L)
MPL(TP/L)
The Law of Marginal Returns
Stage of Production
1 1 3 3 -The Law of Increasing
Marginal ReturnsStage 1
1 2 7 3.5 4
1 3 33 11 26
1 4 50 12.5 17
The Law of Diminishing
Marginal Returns
1 5 65 13 15
1 6 75 12.5 10
Stage 21 7 80 11.43 5
1 8 80 10 0
1 9 78 8.67 – 2Negative
Marginal Returns Stage 31 10 72 7.2 – 6
<
<
<
<
>
12Zulkhairi Nisa-Sg Petani Campus
Short run Average Total Cost Curve
Cost / Price (RM)
15 (Q) Quantity
(units) 13Zulkhairi Nisa-Sg Petani Campus
10
8
7
AVC
AFC
MC ATC or AC
AFC, AVC, ATC & MC The AVC, AFC, ATC and MC are u-shaped due to the law of diminishing
marginal returns
As more variable inputs are employed in order to increase the output, the APP will increase initially and the AVC curves decrease
Beyond certain point, the APPL will reach its maximum then decreases, and at the same time the AVC starts to increase. This is the reason why the AVC is u-shaped.
The ATC is a sum of AVC and AFC and it is u-shaped because as output increases, AFC continues to decline but AVC starts to increase.
The initial rise in AVC is not sufficient to offset the continuing decrease in AFC.
Eventually, AVC increase more than the decline in AFC, so that the ATC curves increases.
At relatively large quantities of output, ATC increase due to the MC and the law of diminishing marginal returns.
14Zulkhairi Nisa-Sg Petani Campus
• The ATC curves reached it maximum point at output 0Q2 at which the firm operates most efficiently.
• If the firm produces output less than 0Q2 the inputs are not fully utilized at the ATC will be relatively higher.
• Contrary, if the firm produces more than the 0Q2, the inputs such as machineries are over utilized and it will increase the ATC.
• The vertical distance between ATC and AVC curves reflects the value of AFC.
• As output increases, the vertical distance diminishes and approaches to zero.
• It shows that the AFC curves falls continuously as output increased.
• It starts with relatively high cost but becoming smaller as output increases; such overhead cost fall continuously as they are spread across larger amount of output.
• The MC curves reflects the slope of TC curve
• Since there is no change in fixed cost, the MC must have increased due to the increase in TVC.
15Zulkhairi Nisa-Sg Petani Campus
Relationship between MC, AVC and ATC
• The AFC curves falls as output expands, steeply at first but then more gradually
• When the ATC and AVC curves are rising, its corresponding MC curve is above it
• When the ATC and AVC curves are falling, its corresponding MC curve is below it
• The AVC curves fall initially, then reaches its minimum point and rises as output increases
• The MC curves intersects the lowest point of the ATC and AVC curves
16Zulkhairi Nisa-Sg Petani Campus
Long run cost curves
• Is the curves that shows the minimum cost of producing any given output when all the inputs are variable
• The LRAC curve is derived by a series of short run average cost (SAC) curves
• Tangential points of the SAC are joined and make up the LRAC
• The long run is a period where firms plan how to minimize the average cost
17Zulkhairi Nisa-Sg Petani Campus
Minimizing Cost of Production in The Long Run
SRAC1
SRAC2
SRAC3
0 Q1 Q2 Q3
18
C1
C2
C3C4C5C6
Cost (RM)
Output
Zulkhairi Nisa-Sg Petani Campus
The Shape of LRAC
• The LRAC is u-shaped because of the law of increasing returns to scale (economies of scale) and the law of decreasing returns to scale (diseconomies of scale) occurs
• The law of increasing returns to scale refers to, as output increases in the long run, the LRAC curve will fall due to internal and external economies of scale which would bring about increasing return to scale and decreasing cost
• The law of decreasing returns to scale refers to as output increases further in the long run, the LRAC curve will rise because of internal and external diseconomies of scale which will bring about decreasing return to scale and increasing cost
Zulkhairi Nisa-Sg Petani Campus 19
Diseconomies of scaleEconomies of scale
Increasing returns to scale
Decreasing returns to scale
Constant returns to
scale
LONG RUN AVERAGE COST (LRAC) CURVE
Cost (RM)
SRAC3
SRAC2
SRAC1
LRAC
A C
B
Quantity (units)
0 Q1 Q2 Q3
20
Economies of Scale
• Economies of scale refer to the advantages of large scale of production.
• It is used to explain why LRAC curve falls when the firm expands and increase its output. Increasing return to scale or decreasing cost industry is associated with economies of scale.
Factors that influence the internal economies of scale:
i) Labor specializationii) Financial economiesiii) Managerial economiciv) Technological economicsv) By products
Zulkhairi Nisa-Sg Petani Campus 21
Diseconomies of Scale
• Diseconomies of scale refer to the disadvantages of large scale of production.
• It is used to explain why LRAC curve rise when the firm expands and increase its output. Decreasing return to scale or increasing cost industry is associated with diseconomies of scale.
Factors that influence the internal diseconomies of scale are:i) Managerial difficultiesii) Low moraleiii) Higher input pricesiv) Marketing diseconomies
Zulkhairi Nisa-Sg Petani Campus 22
Concept of Revenue
• Total revenueIs the value of firm’s sales. Total revenue refers to the total amount of money that a firm can obtain from the sales of its product. TR=P*Q
• Average revenueDefined as the total revenue per unit output sold. AR=TR/Q
• Marginal revenueRefers to the change in total revenue resulting from one unit increase in quantity sold. An additional increase in total revenue when one unit increase in quantity sold. MR=TR/Q
Zulkhairi Nisa-Sg Petani Campus 23