by title firstname surname a project report · pdf fileby title firstname surname entitled...

PROJECT TITLE

BY

TITLE FIRSTNAME SURNAME

A PROJECT REPORT SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF BACHELOR OF ENGINEERING

DEPARTMENT OF …………… ENGINEERING FACULTY OF ENGINEERING THAMMASAT UNIVERSITY

ACADEMIC YEAR 20XX COPYRIGHT OF THAMMASAT UNIVERSITY

THAMMASAT UNIVERSITY FACULTY

PROJECT

BY


ENTITLED

PROJECT TITLE

was approved as partial fulfillment of the requirements for the degree of Bachelor of Engineering

on Approval date e.g. January 1, 2011

Advisor and Committee Chairman Committee Member Committee Member Director

(Academic Title Firstname Surname) (Academic Title Firstname Surname) (Academic Title Firstname Surname) (Academic Title Firstname Surname)

THAMMASAT UNIVERSITY FACULTY

PROJECT

BY


ENTITLED

PROJECT TITLE

was approved as partial fulfillment of the requirements for the degree of Bachelor of Engineering

on Approval date e.g. January 1, 2011

Advisor and Committee Chairman Committee Member and Co-advisor Committee Member Committee Member Director

(Academic Title Firstname Surname) (Academic Title Firstname Surname) (Academic Title Firstname Surname) (Academic Title Firstname Surname) (Academic Title Firstname Surname)

(1)

Project Title PROJECT TITTLE Author Title Firstname Surname Degree Degree Title Department/Faculty/University Department

Faculty Thammasat University

Project Advisor Project Co-Advisor (If any)

Academic Title Firstname Surname Academic Title Firstname Surname

Academic Years 20xx

ABSTRACT

Insert text here

Keywords: Insert keyword here, Insert keyword here, Insert keyword here

(3)

ACKNOWLEDGEMENTS

Insert text here Insert new text here

Title Firstname Surname

(4)

TABLE OF CONTENTS Page ABSTRACT (1) ACKNOWLEDGEMENTS (3) LIST OF TABLES (If any) (7) LIST OF FIGURES (If any) (8) LIST OF ABBREVIATIONS (If any) (9) CHAPTER 1 INTRODUCTION 1

1.1 Main heading 2 1.1.1 Sub-heading 1 3

1.1.1.1 Sub-heading 2 4 (1) Sub-heading 3 5 (2) Sub-heading 3 6



(5) CHAPTER 2 REVIEW OF LITERATURE 14





CHAPTER 3 RESEARCH METHODOLOGY 30





(6) CHAPTER 4 RESULTS AND DISCUSSION 50





CHAPTER 5 CONCLUSIONS AND RECOMMENDATIONS 70





(7) REFERENCES 110 APPENDICES

APPENDIX A 116 APPENDIX B 120 APPENDIX C 125

BIOGRAPHY 127

(8)

LIST OF TABLES Tables Page 1.1 Classification of optimization problems. 3 4.1 comparison of the rate of convergence. 52 4.2 Valued of design variables during the trial. 53 … 6.3 Design rules for robust-optimum corrugated panel structures. 77 6.4 Coefficients of the response functions of the feasible designs. 85

(9)

LIST OF FIGURES Figures Page 1.1 Product development process. 2 2.1 Natural cubic interpolation spline. 4 2.2 Convex hull property of a Bezier curve. 9 3.1 Degree elevation of Bezier curve. 11 3.2 Linear interpolation of convex tolerance zones. 12 …. 6.20 Thickness of robust-optimum designs compared to the 81 thickness of the feasible designs and the trial designs. 6.21 Natural frequency of robust-optimum designs generated 82 using the proposed design rules compared with the natural frequency of the trial designs and flat plates. 6.22 Convergence study of the signal-to-noise ratio of natural 87 Frequency . Neighborhood radius = 10%

(10)

LIST OF ABBREVIATIONS (IF ANY) Symbols/Abbreviations Terms

Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here

1

CHAPTER 1 INTRODUCTION

1.1 Main heading

1.1.1 Sub-heading 1 1.1.1.1 Sub-heading 2

(1) Sub-heading 3 (2) Sub-heading 3

1.2 Main heading



14

CHAPTER 2 REVIEW OF LITERATURE

2.1 Main heading



2.2 Main heading



30

CHAPTER 3 RESEARCH METHODOLOGY

3.1 Main heading



3.2 Main heading



60

CHAPTER 4 RESULTS AND DISCUSSION

4.1 Main heading



4.2 Main heading



111

CHAPTER 5 CONCLUSIONS AND RECOMMENDATIONS

5.1 Main heading



5.2 Main heading



120

REFERENCES Books and Book Articles Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Articles Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here

121 Insert text here Insert text here Insert text here Insert text here Insert text here Insert text here Electronic Media Insert text here Insert text here Insert text here Insert text here Other Materials Insert text here Insert text here Insert text here Insert text here

120

REFERENCES 1. Insert text here Insert text here (cont.) 2. Insert text here Insert text here (cont.) 3. Insert text here Insert text here (cont.) 4. Insert text here Insert text here (cont.) 5. Insert text here Insert text here (cont.)

APPENDICES

126

APPENDIX A INSERT APPENDIX TITLE

Insert text here

130

APPENDIX B INSERT APPENDIX TITLE

Insert text here

135

APPENDIX C INSERT APPENDIX TITLE

Insert text here

140

BIOGRAPHY Name Title Firstname Surname Date of Birth e.g. December31, 1980 Educational Attainment

Academic Year: Insert only bachelor and graduate degrees

Work Position Present position Agency

Scholarship Year XXXX: Scholarship title

Publications

(Insert basing on reference style )

Work Experiences From the present position to the former ones: Position title Workplace

by title firstname surname a project report · pdf fileby title firstname surname entitled...

Documents