by dr. sarika phadke-kelkar national chemical laboratory 24-march-2011
Post on 20-Dec-2015
214 views
TRANSCRIPT
![Page 1: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/1.jpg)
ByDr. Sarika Phadke-Kelkar
National Chemical Laboratory24-March-2011
Solar Powered Hydrogen Generation: Systems, Materials and Performance
![Page 2: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/2.jpg)
Outline
• Energy Crisis• Alternative Fuels• Hydrogen as fuel• Hydrogen production from water using solar energy
– Photo-chemical decomposition of water– Photo-electro-chemical water splitting
• Materials: Selection criteria, important candidates• Current Status & Future Trend
![Page 3: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/3.jpg)
![Page 4: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/4.jpg)
![Page 5: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/5.jpg)
Historical and Projected Variations in Earth’s Surface Temperature
Years
IPCC Reports
![Page 6: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/6.jpg)
Energy Demand in present and near future
* Present : 12.8 TW 2050 년 : 28-35 TW
* Needs at least 16 TW Bio : 2 TW Wind : 2 TW Atomic : 8 TW (8000 power plant) Fossil : 2 TW
* Solar: 160,000 TW
2010 2020
![Page 7: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/7.jpg)
![Page 8: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/8.jpg)
Hydrogen• Hydrogen, a gas, will play an important role in developing sustainable transportation in the United States, because in the future it may be produced in virtually
unlimited quantities using renewable resources. • Hydrogen and oxygen from air fed into a proton exchange membrane fuel
cell produce enough electricity to power an electric automobile, without producing harmful emissions. The only byproduct of a hydrogen fuel cell is water.
• Currently there are no original equipment manufacturer vehicles available for sale to the general public. Experts estimate that in approximately 10-20 years hydrogen vehicles, and the infrastructure to support them, will start to make an impact.
![Page 9: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/9.jpg)
![Page 10: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/10.jpg)
Applications of Hydrogen Fuel
![Page 11: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/11.jpg)
What is a Fuel Cell?• A Fuel Cell is an electrochemical device that
combines hydrogen and oxygen to produce electricity, with water and heat as its by-product.
![Page 12: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/12.jpg)
How can Fuel Cell technology be used?
• Transportation– All major automakers are working
to commercialize a fuel cell car– Automakers and experts speculate
that a fuel cell vehicle will be commercialized by 2010
– 50 fuel cell buses are currently in use in North and South America, Europe, Asia and Australia
– Trains, planes, boats, scooters, forklifts and even bicycles are utilizing fuel cell technology as well
![Page 13: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/13.jpg)
How can Fuel Cell technology be used?
• Stationary Power Stations– Over 2,500 fuel cell systems have been installed
all over the world in hospitals, nursing homes, hotels, office buildings, schools and utility power plants
– Most of these systems are either connected to the electric grid to provide supplemental power and backup assurance or as a grid-independent generator for locations that are inaccessible by power lines
![Page 14: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/14.jpg)
How can Fuel Cell technology be used?
• Telecommunications– Due to computers, the Internet and sophisticated
communication networks there is a need for an incredibly reliable power source
– Fuel Cells have been proven to be 99.999% reliable
![Page 15: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/15.jpg)
How can Fuel Cell technology be used?
• Micro Power– Consumer electronics could
gain drastically longer battery power with Fuel Cell technology
– Cell phones can be powered for 30 days without recharging
– Laptops can be powered for 20 hours without recharging
![Page 16: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/16.jpg)
Hydrogen Production
• The biggest challenge regarding hydrogen production is the cost
• Reducing the cost of hydrogen production so as to compete in the transportation sector with conventional fuels on a per-mile basis is a significant hurdle to Fuel Cell’s success in the commercial marketplace
![Page 17: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/17.jpg)
Hydrogen Production
• There are three general categories of Hydrogen production– Thermal Processes– Electrolyte Processes– PhotocatalyticProcesses
![Page 18: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/18.jpg)
Hydrogen Production
• PhotocatalyticProcesses– Uses light energy to split water into hydrogen and
oxygen– These processes are in the very early stages of
research but offer the possibility of hydrogen production which is cost effective and has a low environmental impact
– Two types: a) Photochemical b) Photo-electro-chemical
![Page 19: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/19.jpg)
Photo-catalytic water splitting1. Direct Water Splitting: 2. Water Splitting using photo-
electrochemical cell (PEC):
p n
H+/H2
e-
e-
h+ h1
h+
h2O2
H2O/O2
h
H2 TCO with ohmic contact
![Page 20: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/20.jpg)
Experimental setupDirect Water Splitting:
PEC water splitting:
Potentiostat
![Page 21: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/21.jpg)
Metal
P-type semiconductor
P-type semiconductor
N-type semiconductor
N-type semiconductor
Metal
Phto-electrochemistry of water decomposition
• Basic principle
![Page 22: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/22.jpg)
Reaction Mechanism2hν→ 2e + 2h′ + (1)2h+ + H2O(liquid) → 1/2O2(gas) + 2H+ (2)
2H+ + 2e → H′ 2(gas) (3)
Overall Reaction2hν + H2O(liquid) → 1/2O2(gas) + H2(gas)
= 1.23 eV
Electrochemical decomposition of water is possible when EMF of cell ≥ 1.23 V
![Page 23: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/23.jpg)
Band model representation
A
B
C
D
![Page 24: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/24.jpg)
Materials Aspects of PEC
• Two main functions of photoelectrodes– Optical function: maximum absorption of solar energy– Catalytic function: water decomposition
• Desired properties of photoelectrodes– Bandgap– Flatband potential– Schottky barrier– Electrical resistance– Helmholtz potential– Corrosion resistance– Microstructure
![Page 25: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/25.jpg)
Band structure of photoelectrode material
![Page 26: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/26.jpg)
Metals
No band gap
Only reduction or oxidation
Depends on the band position
Insulators
High band gap
High energy requirement
Metals
VB
CB
VB
CB
VB
CBH+/H2
H2O/O2
Insulators
SC
E
WHY SEMICONDUCTOR ?
26
![Page 27: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/27.jpg)
For conventional redox reactions, one is interested in either reduction or oxidation of a substrate.
For example consider that one were interested in the oxidation of Fe2+ ions to Fe 3+ ions then the oxidizing agent that can carry out this oxidation is chosen from the relative potentials of the oxidizing agent with respect to the redox potential of Fe2+/Fe3+ redox couple.
The oxidizing agent chosen should have more positive potential with respect to Fe3+/Fe2+ couple so as to affect the oxidation, while the oxidizing agent undergoes reduction spontaneously. This situation throws open a number of possible oxidizing agents from which one of them can be easily chosen.
Concepts –Why semiconductors are chosen as photo-catalysts?
27
![Page 28: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/28.jpg)
Bandgap
![Page 29: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/29.jpg)
![Page 30: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/30.jpg)
Flatband potential
![Page 31: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/31.jpg)
Other important parameters
• Electrical Conductivity
• Helmholtz Potential Barrier
• Corrosion Resistance:– Electrochemical corrosion resistance– Photocorrosion resistance– Dissolution
![Page 32: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/32.jpg)
Criterion for PE corrosion stability
Free enthalpy of oxidation reactionPhoto anode
Free enthalpy of reduction reactionPhoto cathode
![Page 33: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/33.jpg)
What modifications?
• various conceptual principles have been incorporated into typical TiO2 system so as to make this system responsive to longer wavelength radiations. These efforts can be classified as follows:
• Dye sensitization• Surface modification of the semiconductor to
improve the stability • Multi layer systems (coupled semiconductors)• Doping of wide band gap semiconductors like TiO2
by nitrogen, carbon and Sulphur • New semiconductors with metal 3d valence band
instead of Oxide 2p contribution • Sensitization by doping.• All these attempts can be understood in terms of
some kind sensitization and hence the route of charge transfer has been extended and hence the efficiency could not be increased considerably. In spite of these options being elucidated, success appears to beeluding the researchers.
33
![Page 34: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/34.jpg)
Conditions to be satisfied?
• The band edges of the electrode must overlap with the acceptor and donor states of water decomposition reaction, thus necessitating that the electrodes should at least have a band gap of 1.23 V, the reversible thermodynamic decomposition potential of water. This situation necessarily means that appropriate semiconductors alone are acceptable as electrode materials for water
• The charge transfer from the surface of the semiconductor must be fast enough to prevent photo corrosion and shift of the band edges resulting in loss of photon energy.
34
![Page 35: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/35.jpg)
without deterioration of the stability
should increase charge transfer processes at the interface
should improvements in the efficiency
ENGINEERING THE SEMICONDUCTOR ELECTRONIC STRUCTURES
35
![Page 36: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/36.jpg)
Positions of bands of semiconductors relative to the standard potentials of several redox couples
36
![Page 37: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/37.jpg)
Identifying and designing new semiconductor materials with considerable conversion efficiency and stability
Constructing multilayer systems or using sensitizing dyes - increase absorption of solar radiation
Formulating multi-junction systems or coupled systems - optimize and utilize the possible regions of solar radiation
Developing nanosize systems - efficiently dissociate water
THE AVAILABLE OPPORTUNITIES
37
![Page 38: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/38.jpg)
high surface area
morphology
presence of surface states
wide band gap
position of the VB & CB edge
CdS – appropriate choice for the hydrogen production
eV
ADVANTAGES OF SEMICONDUCTOR NANOPARTICLES
38
![Page 39: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/39.jpg)
The opportunities
• The opportunities that are obviously available as such now include the following:
– Identifying and designing new semiconductor materials with considerable conversion efficiency and stability
– Constructing multilayer systems or using sensitizing dyes so as to increase absorption of solar radiation.
– Formulating multi-junction systems or coupled systems so as to optimize and utilize the possible regions of solar radiation.
– Developing catalytic systems which can efficiently dissociate water.
39
![Page 40: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/40.jpg)
Opportunities evolved
• Deposition techniques have been considerably perfected and hence can be exploited in various other applications like in thin film technology especially for various devices and sensory applications.
• The knowledge of the defect chemistry has been considerably improved and developed.
• Optical collectors, mirrors and all optical analysis capability have increased which can be exploited in many other future optical devices.
• The understanding of the electronic structure of materials has been advanced and this has helped to our background in materials chemistry.
• Many electrodes have been developed, which can be a useful for all other kinds of electrochemical devices.
40
![Page 41: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/41.jpg)
Limited success – Why?The main reasons for this limited success in all these
directions are due to:• The electronic structure of the semiconductor controls the
reaction and engineering these electronic structures without deterioration of the stability of the resulting system appears to be a difficult proposition.
• The most obvious thermodynamic barriers to the reaction and the thermodynamic balances that can be achieved in these processes give little scope for remarkable improvements in the efficiency of the systems as they have been conceived and operated. Totally new formulations which can still satisfy the existing thermodynamic barriers have to be devised.
• The charge transfer processes at the interface, even though a well studied subject in electrochemistry has to be understood more explicitly, in terms of interfacial energetics as well as kinetics. Till such an explicit knowledge is available, designing systems will have to be based on trial and error rather than based on sound logical scientific reasoning.
41
![Page 42: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/42.jpg)
• Nanocrystalline (mainly oxides like TiO2, ZnO, SnO and Nb2O5 or chalcogenides like CdSe) mesoscopic semiconductor materials with high internal surface area If a dye were to be adsorbed as a monolayer, enough can be retained on a given area of the electrode so as to absorb the entire incident light.
• Since the particle sizes involved are small, there is no significant local electric field and hence the photo-response is mainly contributed by the charge transfer with the redox couple.
• Two factors essentially contribute to the photo-voltage observed, namely, the contact between the nano crystalline oxide and the back contact of these materials as well as the Fermi level shift of the semiconductor as a result of electron injection from the semiconductor.
42
![Page 43: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/43.jpg)
Another aspect of thee nano crystalline state is the alteration of the band gap to larger values as compared to the bulk material which may facilitate both the oxidation/reduction reactions that cannot normally proceed on bulk semiconductors.
The response of a single crystal anatase can be compared with that of the meso-porous TiO2 film sensitized by ruthenium complex (cis RuL2 (SCN)2, where L is 2-2’bipyridyl-4-4’dicarboxlate).
The incident photon to current conversion efficiency (IPCE) is only 0.13% at 530 nm ( the absorption maximum for the sensitizer) for the single crystal electrode while in the nano crystalline state the value is 88% showing nearly 600-700 times higher value.
43
![Page 44: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/44.jpg)
This increase is due to better light harvesting capacity of the dye sensitized nano crystalline material but also due to mesoscpic film texture favouring photo-generation and collection of charge carriers .
It is clear therefore that the nano crystalline state in combination with suitable sensitization is one another alternative which is worth investigating.
44
![Page 45: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/45.jpg)
• The second option is to promote water splitting in the visible range using Tandem ells. In this a thin film of a nanocrystalline WO3 or Fe2O3 may serve as top electrode absorbing blue part of the solar spectrum. The positive holes generated oxidize water to oxygen
• 4h+ + 2H2O --- O2 + 4 H+
• The electrons in the conduction band are fed to the second photo system consisting of the dye sensitized nano crystalline TiO2 and since this is placed below the top layer it absorbs the green or red part of the solar spectrum that is transmitted through the top electrode. The photo voltage generated in the second photo system favours hydrogen generation by the reaction
• 4H+ + 4e- --- 2H2
• The overall reaction is the splitting of water utilizing visible light. The situation is similar to what is obtained in photosynthesis
45
![Page 46: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/46.jpg)
• Dye sensitized solid hetero-junctions and extremely thin absorber solar cells have also been designed with light absorber and charge transport material being selected independently so as to optimize solar energy harvesting and high photovoltaic output. However, the conversion efficiencies of these configurations have not been remarkably high.
• Soft junctions, especially organic solar cells, based on interpenetrating polymer networks, polymer/fullerene blends, halogen doped organic crystals and a variety of conducting polymers have been examined. Though the conversion efficiency of incident photons is high, the performance of the cell declined rapidly. Long term stability will be a stumbling block for large scale application of polymer solar cells.
46
![Page 47: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/47.jpg)
New Opportunities
1. New semi-conducting materials with conversion efficiencies and stability have been identified. These are not only simple oxides, sulphides but also multi-component oxides based on perovskites and spinels.
2. Multilayer configurations have been proposed for absorption of different wavelength regions. In these systems the control of the thickness of each layer has been mainly focused on.
47
![Page 48: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/48.jpg)
New Opportunities
3. Sensitization by dyes and other anchored molecular species has been suggested as an alternative to extend the wavelength region of absorption.
4. The coupled systems, thus giving rise to multi-junctions is another approach which is being pursued in recent times with some success
5. Activation of semiconductors by suitable catalysts for water decomposition has always fascinated scientists and this has resulted in various metal or metal oxide (catalysts) loaded semi conductors being used as photo-anodes
48
![Page 49: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/49.jpg)
New opportunities (Contd)• Recently a combinatorial electrochemical synthesis
and characterization route has been considered for developing tungsten based mixed metal oxides and this has thrown open yet another opportunity to quickly screen and evaluate the performances of a variety of systems and to evolve suitable composition-function relationships which can be used to predict appropriate compositions for the desired manifestations of the functions.
• It has been shown that each of these concepts, though has its own merits and innovations, has not yielded the desired levels of efficiency. The main reason for this failure appears to be that it is still not yet possible to modulate the electronic structure of the semiconductor in the required directions as well as control the electron transfer process in the desired direction.
49
![Page 50: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/50.jpg)
PREPARATION OF CdS NANOPARTICLES
1 g of Zeolite (HY, H, HZSM-5)
1 M Cd(NO3)2 , stirred for 24 h, washed with water
Cd / Zeolite
1 M Na2S solution, stirred for 12 h, washed with water
CdS / Zeolite
48 % HF, washed with water
CdS Nanoparticles
50
![Page 51: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/51.jpg)
XRD PATTERN OF CdS
20 30 40 50 60 70 80
CdS-Z
CdS-
CdS-Y
CdS (bulk)
Inte
nsit
y (a
.u.)
2 theta
M. Sathish, B. Viswanathan, R. P. Viswanath Int. J. Hydrogen Energy (In press)51
![Page 52: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/52.jpg)
Debye Scherrer Equation
dSPACING AND CRYSTALLITE SIZE
0.89
cosT
q = diffraction angle T = Crystallite size = wave length = FWHM
d-spacing (Å)Catalyst (0 0 2) (1 0 1) (1 1 2)
CrystalliteSize(nm)
CdS (bulk) 1.52 1.79 2.97 21.7
CdS (bulk)(HF treated)
1.52 1.79 2.93 21.7
CdS-Y 1.53 1.79 2.96 8.8
CdS- 1.52 1.78 2.93 8.6
CdS-Z 1.52 1.79 2.97 7.2
52
![Page 53: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/53.jpg)
UV –VISIBLE SPECTRA OF CdS SAMPLES
Samples Band Gap (eV)
CdS – Z
CdS – Y
CdS -
Bulk CdS
2.38
2.27
2.21
2.13
500 600 700
Ab
so
rb
an
ce (a.u
.)
CdS (bulk) CdS - CdS - Z CdS - Y
Wavelength (nm)
M. Sathish, B. Viswanathan, R. P. Viswanath Int. J. Hydrogen Energy (In press)53
![Page 54: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/54.jpg)
PHOTOCATALYTIC PRODUCTION OF HYDROGEN
35ml of 0.24 M Na2S and 0.35 M Na2SO3 in Quartz cell
0.1 g CdS400 W Hg lamp
N2 gas purged before the reaction and constant stirring
Hydrogen gas was collected overwater in the gas burette
54
![Page 55: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/55.jpg)
AMOUNT OF HYDROGEN EVOLVED BY CdS PHOTOCATALYST
0 1 2 3 4 5 60
100
200
300
400
500
600
700
Am
ou
nt
of
Hyd
rog
en (
mic
ro m
ole
s / 0
.1g
)
Time (h)
CdS - Y CdS - Z CdS - CdS - with HY CdS (bulk)
55
![Page 56: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/56.jpg)
TEM IMAGE OF CdS NANOPARTICLES
Catalyst Particle Size (nm)
Surfacearea (m2/g)
Rate of hydrogenproduction ( moles /h)
CdS - Y 8.8 36 102
CdS - Z 6 46 68
CdS - 11 26 67
CdS - Bulk 23 14 45
CdS-Z
CdS-
100 nm100 nm
CdS-Z
56
![Page 57: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/57.jpg)
SCANNING ELECTRON MICROGRAPHS
57
CdS-Z CdS-Y
CdS- CdS- bulk
![Page 58: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/58.jpg)
PHOTOCATALYSIS ON Pt/TiO2 INTERFACE
Electrons are transferred to metal surface
Reduction of H+ ions takes place at the metal surface
The holes move into the other side of semiconductor
The oxidation takes place at the semiconductor surface
TiO2Pt
Vacuum level
Aq. Sol Aq. Sol
pH=0
pH = 7H+/H2
C.B
V.B
EF
T.Sakata, et al Chem. Phys.Lett. 88 (1982) 5058
![Page 59: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/59.jpg)
MECHANISM OF RECOMBINATION REDUCTION BY METAL DOPING
Conduction Bande- e- e- e- e- e- e- e- e- e- e- e-
Valence Bandh+ h+ h+ h+ h+ h+ h+ h+ h+ h+
Electron/hole pairrecombination
Electron/hole pair generation
e-(M) <-- M+e-
Eg
Metallic promoter attracts electrons from TiO2 conduction band and slows recombination reaction
52
![Page 60: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/60.jpg)
0 1 2 3 4 5 60
500
1000
1500
2000
2500
3000
3500
4000H-ZSM-5
Am
ou
nt
of
Hyd
rog
en (
mic
ro m
ole
s / 0
.1g
)
Time (h)
Pt / CdS Pd / CdS Rh / CdS CdS (Bulk) Ru / CdS
0 1 2 3 4 5 60
500
1000
1500
2000
2500
3000
HY
Am
ou
nt
of
Hyd
rog
en
(m
icro
mo
les / 0
.1g
)
Time (h)
Pt / CdS Pd / CdS CdS (Bulk) Rh / CdS Ru / CdS
Activity of the catalyst is directly proportional to work function of the metal and M-H bond strength.
PHOTOCATALYTIC HYDROGEN EVOLUTION OVER METAL LOADED CdS NANOPARTICLES
0 1 2 3 4 5 60
500
1000
1500
2000
2500
3000
3500H beta
(A
mo
un
t o
f h
ydro
gen
(m
icro
mo
les/
0.1
g))
Time (h)
Pt / CdS Pd / CdS Rh / CdS CdS (Bulk) Ru / CdS
60
![Page 61: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/61.jpg)
MetalRedox
potential(E0)
Metal- hydrogen bond energy (K cal mol-1)
Work function
(eV)
Hydrogen evolution rate*(µmol h-1 0.1g-1)
PtPdRhRu
1.1880.9510.7580.455
62.864.565.166.6
5.655.124.984.71
60014411454
HYDROGEN PRODUCTION ACTIVITY OF METAL LOADED CdS PREPARED FROM H-ZSM-5
*1 wt% metal loaded on CdS-Z sample. The reaction data is presented after 6 h under reaction condition.
M. Sathish, B. Viswanathan, R. P. Viswanath Int. J. Hydrogen Energy (In press)61
![Page 62: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/62.jpg)
Pt, Pd & Rh show higher activity
High reduction potential.
Hydrogen over voltage is less for Pt, Pd & Rh
EFFECT OF METALS ON HYDROGEN EVOLUTION RATE
Ru
Ni
Pt
Pd
Ag
Fe
Cu
Rh
Au
10
100
1000
3 %
62
![Page 63: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/63.jpg)
0 2 4 6 8 10 12 14 16 18 20 2240
45
50
55
60
65
70
75
80
Bulk CdS
CdS (ZSM-5)
CdS (ZSM-5)/MgO
CdS (ZSM-5)/Al2O
3
Bulk CdS/MgO
Bulk CdS/Al2O
3
Rat
e o
f h
ydro
gen
pro
du
ctio
n
(µm
ol h
-1 0
.1g
-1)
CdS (Wt %)
EFFECT OF SUPPORT ON THE CdS PHOTOCATLYTIC ACTIVITY
2, 5,10 and 20 wt % CdS on support - by dry impregnation method
MgO support has higher photocatalytic activity - favourable band position
Alumina & Magnesia supports enhance photocatalytic activity
63
![Page 64: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/64.jpg)
Pb2+/ ZnS
Absorption at 530nm (calcinations at 623-673K)
Formation of extra energy levels between the band gap by Pb 6s orbital
Low activity at 873K is due to PbS formation on the surface (Zinc blende to wurtzite)
(a) 573 K, (b) 623 K, (c) 673 K, (d) 773 K, and (e) 873K Band structure of ZnS doped with Pb.
Eg
I. Tsuji, et al J. Photochem. Photobiol. A. Chem 622 (2003) 1 64
![Page 65: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/65.jpg)
250 ml of 5 mM Na2S solution
250 ml of 1 mM Cd(NO3)2
Rate of addition 20 ml / h
Ultrasonic waves
= 20 kHz
The resulting precipitate was washed with distilled water until the filtrate was free from S2- ions
PREPARATION OF MESOPOROUS CdS NANOPARTICLE BY ULTRASONIC MEDIATED PRECIPITATION
65
![Page 66: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/66.jpg)
0.0 0.2 0.4 0.6 0.8 1.00
20
40
60
80
100
120
140
0 20 40 60 80 1000
2
4
6
8
Relative volum
e (%
)
Pore range (A)
Vo
lu
me (cm
3 /g
)
P/Po
The specific surface area and pore volume are 94 m2/g and 0.157 cm3/g respectively
The adsorption - desorption isotherm – Type IV (mesoporous nature)
Mesopores are in the range of 30 to 80 Å size
The maximum pore volume is contributed by 45 Å size pores
N2 ADSORPTION - DESORPTION ISOTHERM
66
![Page 67: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/67.jpg)
20 30 40 50 60 70
(311)(220)
(111)
In
ten
sity (a.u
.)
2 theta
XRD pattern of as-prepared CdS -U shows the presence of cubic phase
The observed “d” values are 1.75, 2.04 and 3.32 Å corresponding to the (3 1 1) (2 2 0) and (1 1 1) planes respectively - cubic
The peak broadening shows the formation of nanoparticles
The particle size is calculated using Debye Scherrer Equation
The average particle size of as- prepared CdS is 3.5 nm
X- RAY DIFFRACTION PATTERN
M. Sathish and R. P. Viswanath Mater. Res. Bull(Communicated)67
![Page 68: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/68.jpg)
The growth of fine spongy particles of CdS-U is observed on the surface of the CdS-U
The CdS-bulk surface is found with large outgrowth of CdS particles
The fine mesoporous CdS particles are in the nanosize range
The dispersed and agglomerated forms are clearly observed for the as-prepared CdS-U
CdS-U CdS - Bulk
TEM SEM
ELECTRON MICROGRAPHS
68
CdS-U
100 nm
![Page 69: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/69.jpg)
Metal CdS-U CdS-Z CdSbulk
-
Rh
Pd
Pt
73
320
726
1415
68
114
144
600
45
102
109
275
1 wt % Metal loaded CdS – U is 2-3 times more active than the CdS-
Z
PHOTOCATALYTIC HYDROGEN PRODUCTION
Na2S and Na2SO3 mixture used as sacrificial agent
Amount of hydrogen (µM/0.1 g)
0 1 2 3 4 5 60
2000
4000
6000
8000
10000
Time (h)
Am
ou
nt o
f h
yd
ro
gen
/M
0.1g
-1
Pt / CdS-U Pd / CdS-U Rh / CdS-U CdS-U
69
![Page 70: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/70.jpg)
Difficulties on controlling the semiconductor electronic structure without deterioration of the stability
Little scope on the thermodynamic barriers and the thermodynamic balances for remarkable improvements in the efficiency
Incomplete understanding in the interfacial energetic as well as in the kinetics
LIMITED SUCCESS – WHY?
70
![Page 71: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/71.jpg)
Deposition techniques -thin film technology, for various devices and sensory applications.
Knowledge of the defect chemistry has been considerably improved and developed.
Optical collectors, mirrors and all optical analysis capability have increased
Understanding of the electronic structure of materials
Many electrodes have been developed- useful for all other kinds of electrochemical devices.
THE OTHER OPPORTUNITIES EVOLVED
71
![Page 72: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/72.jpg)
Thank you all foryour kind attention
![Page 73: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/73.jpg)
Metal
P-type semiconductor
P-type semiconductor
N-type semiconductor
N-type semiconductor
Metal
Photo-electrochemical H2 Generation
• Basic principle
![Page 74: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/74.jpg)
Reaction Mechanism
• 2hν→ 2e + 2h+ ′ (1)• 2h+ + H2O(liquid) → 1/2O2(gas) + 2H+ (2)
• 2H+ + 2e → H′ 2(gas) (3)• Overall Reaction• 2hν + H2O(liquid) → 1/2O2(gas) + H2(gas)
= 1.23 eV
Electrochemical decomposition of water is possible when EMF of cell ≥ 1.23 V
![Page 75: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/75.jpg)
Metal Oxide Requirements
• Two main functions of photoelectrodes– Optical function: maximum absorption of solar energy– Catalytic function: water decomposition
• Desired properties of photoelectrodes– Bandgap– Flatband potential– Schottky barrier– Electrical resistance– Helmholtz potential– Corrosion resistance– Microstructure
![Page 76: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/76.jpg)
Bandgap
![Page 77: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/77.jpg)
Flatband Potential
![Page 78: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/78.jpg)
Other important parameters
• Electrical Conductivity
• Helmholtz Potential Barrier
• Corrosion Resistance:– Electrochemical corrosion resistance– Photocorrosion resistance– Dissolution
![Page 79: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/79.jpg)
Criterion for PE corrosion stability
Free enthalpy of oxidation reactionPhoto anode
Free enthalpy of reduction reactionPhoto cathode
![Page 80: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/80.jpg)
Dye-Sensitized TiO2
J. AM. CHEM. SOC. 2009, 131, 926–927
![Page 81: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/81.jpg)
Mesoporous Fe2O3
J. AM. CHEM. SOC. 9 VOL. 132, NO. 21, 2010
![Page 82: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/82.jpg)
WO3 Nanowires
![Page 83: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/83.jpg)
Double-Sided CdS and CdSe Quantum Dot Co-Sensitized ZnONanowire Arrays for PEC Hydrogen Generation
NanoLett. 2010, 10, 1088–1092
![Page 84: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/84.jpg)
Summary
• Metal oxide nanomaterials offer great versatility in properties
• Optoelectronic properties can be tuned by choosing/controlling the synthesis protocol
• Hybridization with organic/molecular materials provide unique combinations of properties
• Low temperature and solution based processing is the key for future metal oxide based energy devices
![Page 85: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/85.jpg)
Thank You!
![Page 86: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/86.jpg)
What is Nanoscale
1.27 × 107 m
ww
.mat
hwor
ks.c
om
0.22 m 0.7 × 10-9 m
Fullerenes C60
12,756 Km 22 cm 0.7 nm
10 millions times smaller
1 billion times smaller
ww
w.p
hysi
cs.u
cr.e
du
![Page 87: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/87.jpg)
How Small is Nano Really ?
![Page 88: By Dr. Sarika Phadke-Kelkar National Chemical Laboratory 24-March-2011](https://reader038.vdocuments.us/reader038/viewer/2022110207/56649d415503460f94a1b56b/html5/thumbnails/88.jpg)
Gold nanoparticles of different sizes
InP nanoparticles
Passivated Carbon NanodotsSun et al. JACS 128, 7756 (2006)
Quantum Phenomena
Large Surface to Volume Ratio