by beyond tiles - norman piette · 2020-03-31 · design f23 tile size: 200mm x 300mm ivory tile g...

BEYOND TILES

BY

WHY CHOOSE FIBO WALL PANELS?

THE MODERN ALTERNATIVE TO CERAMIC TILES

MANUFACTURED IN NORWAY

✓Easy and quick to install

✓Fits over existing tiles

✓Low maintenance/easy clean

✓No grouting required

✓Unique range of finishes

✓Environmentally friendly

✓15 year domestic guarantee

THE LEADING NAME IN QUALITY WALL PANELS FOR OVER 30 YEARS MAKING FIBO THE NATURAL CHOICE

FIBO is the original wet room wall panel which offers a lower cost and maintenance free alternative to ceramic tiles. Fibo wall panels provide instant waterproof walls with a great choice of colours and finishes suitable for use in both commercial and domesticenvironments. Designed to cope with high humidity, Fibo wall panels can transform all types of rooms to reflect your moods andaspirations. The decorative panels bring together beauty and practicality providing instant, waterproof and hygienic walls. Our precision engineered Aqualock tongue and groove system with a 7-layer plywood core is a perfect fit every time and can be installed directly over existing tiles. Our collections provide you with a wealth of choice from a wide selection of luxurious decors, subtle pastels and exciting contemporary tile effect designs. Modern and environmentally friendly, Fibo panels provide timeless designs to suit all tastes.

Designed and manufactured in Norway, the home of wood technology and contemporary Scandinavian style, Fibo is the leading bathroom wall panel brand and has been manufactured since 1952. Originally known as Respatex in the UK since 1981, our panels have been proven for over 30 years in prestigious projects and numerous private homes.

Proven in the past…

…designed for the future!

1

BEYOND TILES

TRADITIONAL PLUSContemporary and fun decors

Page 15

OUR COLLECTIONS

2

TRADITIONAL RANGETimeless classic colours

Page 16

CLASSIC TILE RANGEThe luxurious look of ceramic tiles with the benefit of panels

Page 9

COLOUR SPLASH RANGEFantastic extra matt finish with colour splash range

Page 13

KITCHEN PANEL RANGEA new concept for kitchen splashbacks

Page 19

MARCATO TILE RANGENew and exciting tile effect panels reflecting today’s style

Cracked Cement 2204-M633

Images and colours shown must be used as a guide only. Please see actual laminate samples before purchase as colours are only as accurate as printing allows.

MARCATO TILE RANGE

Our latest tile panel collection gives you modern matt finishes, large tile patterns and thin grout lines of 1.8mm - a more contemporary and stylish look for your bathroom

Grey Concrete EM 4943-M63

Letter denotes surface finish: S - Silk · C - Cement · EM - Extra Matt · RU - Rustic · SC - Bark Effect | Grey Grout Line White Grout Line

Tile Panels above are only available in 600m width with “Aqualock“.

Effect Panels are only available in 300m width with “Aqualock“.

4

White Tile S 2091-M63

White Tile S 2091-M66

Sahara EM 5342-M63

Zink S 2069-ME88 (Effect panel)

Shabby Chic RU 2898-M63

Cracked Cement S 2204-M63

Roughwood SC 7969-M66

Black Coal C 1066-ME88 (Effect panel)

Acacia 4553-M63 and White Tile 2091-M63

Palermo 4761-M63 and Denver White 3091-M63

Marina Grey Oak 0194-M64 and White Tile 2091-M645


6

We have added some exciting new decors to our Marcato tile panel collection.

Panels have a thin grout line - 1.8mm wide. All panels sized 600mm x 2400mm x 10.2mm

MARCATO TILE RANGE

Palermo GEM 4761-M63

Lentini Light STN 8054-M64

Marina Grey Oak EM 0194-M64

Athen White HG 5091-M63

Kalahari HG 4098-M64

Acacia S 4553-M63

Letter denotes surface finish: HG - High gloss · EM - Extra Matt · GEM - Gem Stone · S - Silk finish · STN - Stone | Grey Grout Line White Grout Line


7

MARCATO TILE PANELS - TECHNICAL DETAILS

Panel size: 2400mm x 600mm x 10.2mm

Grout Line is 1.8mm wide on all M tile designs

Effect Panel size: 2400mm x 300mm x 10.2mm

The drawings show the full size panels in the Marcato Tile range and how the size of the tile appears on the panel. The different tile designs are only available in the colours shown.

These panels are only available in the 600mm width size as the Aqualock joint is hidden in the textured grout line, creating an “invisible“ join.

Letter denotes surface finish:

S - Silk · EM - Extra Matt · RU - Rustic · SC - Bark Effect · C - Cement · HG - High Gloss · STN - Stone · GEM - Gem Stone

Sahara 5342-M63 with Zink 2069-ME88

Design M66Tile size:600mm x 600mm

White Tile S 2091

Roughwood SC 7969

Effect Panels only available in 300mm width

Design ME88 Effect PanelTile size varies - panel size:300mm x 2400mm

Black Coal C 1066

Zink S 2069


White Tile S 2091

Shabby Chic RU 2898

Cracked Cement S - 2204

Sahara EM 5342

Grey Concrete EM 4943

Athen White HG 5091

Acacia S 4553

Palermo GEM 4761


Lentini Light STN - 8054

Marina Grey Oak EM 0194

Kalahari HG 4098

Shabby Chic 2898-M63 and White Tile 2091-M66 8

Toscana Tile 2506-F239


CLASSIC TILE RANGE

The luxurious look of ceramic tile with all the benefits of a wall panel

Ivory Tile G 2520-F23

Toscana Tile HG 2506-F23

The two Fibo tile panel ranges introduce the luxurious look of traditional tiling with the benefits of easily installed panels. The unique Aqualock jointing system ensures a perfect fit every time.

Tile panels only available in 600mm width with Aqualock.

Tile panels have an “invisible join” - hidden in the grout lines.

Letter denotes surface finish: G - Gloss · HG - High Gloss · S - Silk | Grey Grout Line White Grout Line

Ivory Tile 2520-F23

Santiago Tile HG 2586-F22

White Tile S 2091-F08

Anthracite HG 4054-F24

10


White Tile S 2091

CLASSIC TILE PANELS - TECHNICAL DETAILS

Panel size: 2400mm x 600mm x 10.2mm

Grout Line is 3.2mm wide on all F tile designs

The drawings show the full size panels in the Classic Tile range and how the size of the tile appears on the panel. The different tile designs are only available in the colours shown.

These panels are only available in the 600mm width size as the join is hidden in the textured grout lines.

Anthracite Tile HG 4054

Design F24Tile size:600mm x 150mm

Santiago Tile HG 2586


Letter denotes surface finish: G - Gloss · HG - High Gloss · S - Silk

Toscana Tile HG 2506


Ivory Tile G 2520


Santiago Tile 2586-F22

11

Anthracite Tile 4054-F24 and Ivory Tile 2520-F2312


COLOUR SPLASH RANGE

All panels sized 600mm x 2400mm x 10.2mm

Grout Line is 1.8mm on all M64 tile designs

13

With a fantastic extra matt finish our colour splash range adds a fresh, bright palette of colours to our existing collections.

Available in a choice of two designs, plain without grout lines or with a large tile M64 (600mm x 400mm).

Colour Splash panels are also available with other tile designs as a special order, please check with the Sales office.

Letter denotes surface finish: EM - Extra Matt | White Grout Line

Aberdeen EM 0089

Zanzibar EM 0732

Marrakech EM 0092

Hanoi EM 0087

Cairo EM 0091

Lima EM 0528

Design M00 Design M64Tile size: 600mm x 400mm

Cairo 0091-M64 and Aberdeen 0089-M64

Lima 0528-M64 and White Tile 2091-M64 Hanoi 0087-M64 and White Tile 12091-M64

14

Grey Concrete 4943 and White Tile 2091-M6615


Letter denotes surface finish: HG - High Gloss · S - Silk · EM - Extra Matt

16

Bold and exciting colours to liven up your space

All panels are 2400mm high and are available in 600mm & 900mm widths with ‘Aqualock‘ or 1200mm width with square edge only.

Sugar Sparkle HG 030

Grey Concrete EM 4943

Black Sparkle HG 033

TRADITIONAL PLUS RANGE

TRADITIONAL RANGE

Our collection of classic and timeless panel colours

Frost Green S 551

Titan S 192

Bilbao HG 592

Titan 192

Toscana 50617


TRADITIONAL RANGE

Our collection of classic and timeless panel colours

All panels are 2400mm high and are available in 600mm & 900mm widths with ‘Aqualock‘ or 1200mm width with square edge only.

Letter denotes surface finish: G - Gloss · HG - High Gloss · S - Silk

18

Crystal White Silk S 110S

Ivory G 520

Gavot G 505

Crystal White Gloss HG 110HG

Oyster HG 537

DISCO

NTI

NUED

Sandstone S 232

Frost Blue S 544

Milano Marble G 962

Toscana HG 506

Peach Nimbus S 546

Shabby Chic 2898-K00

New York Black 2124-KM99

19


KITCHEN PANEL RANGE

A new kitchen in one afternoon with Fibo kitchen panels.

Letter denotes surface finish:

S - Silk · HG - High Gloss · EM - Extra Matt · STN - Stone · RU - Rustic | Grey Grout Line White Grout Line

Fibo introduce our new collection of kitchen splashback panels. Especially designed and engineered for quick and easy installation, these panels provide a stylish and hygienic solution in the kitchen

Grout line is 1.8mm wide on KM tile designs and 3.2mm wide on K tile designs

Shabby Chic RU 2898-K00

Sahara EM 5342-KM25

Cracked Cement S 2204-K00

Denver White HG 3091-K03

Denver White HG 3091-K40

New York Black - HG 2124-KM99

Grey Sahara STN 4746-KM3010

Anthracite HG 4054-K03

Denver White 3091-K03

20

KITCHEN PANELS - RECIPE FOR STYLE

Renew your kitchen in a few hours with Fibo panels fitted in the area between worktop and wall cabinets.

The kitchen panels can be mounted directly onto battens or glued to existing screw fixed walls or tiles. Follow the simple installation instructions, included in the panel pack or downloadable from our website, and you will achieve a great result in no time which you will enjoy for years.

Cleaning tips: The panels are easily cleaned with a mild detergent and warm water and, for more stubborn stains, a general multi-purpose surface cleaner can be used. Never use abrasive cleaners or pads on the laminate as this will cause scratch marks or surface dullness.

Do not use steam cleaners on the panels.

Fibo kitchen panels can be fitted adjacent to a gas hob if necessary but it is essential to check with the hob manufacturer regarding the minimum distance needed between the board and the gas jets and we would suggest a gap of no less than 50mm. Failure to comply with the hob manufacturer recommendation may invalidate our product guarantee. We would recommend a glass or stainless steel panel behind gas cookers or hobs.

Fire Resistance: Fibo Kitchen panels have a Class 1 Spread of Flame tested to NS-EN 13501-1:2007+A1:2009. Fire Certificate: D-s1.d0

Easy care and maintenance free, Fibo Kitchen Panels have a smooth and durable surface, resistant to splashes and temperature fluctuations and are simple to install with our Aqualock system. And with no messy grouting or cracking to trap bacteria, they help create a hygienic and safe environment where food can be prepared with complete peace of mind.

Cracked Cement 2204-K00

Grey Sahara 4746-KM3010

Design KM99

New York Black HG - 2124

21

KITCHEN PANELS - TECHNICAL DETAILS

2 Panel sizes: 600mm x 580mm x 10.2mm | 600mm x 900mm x 10.2mm

Available in two handy sizes, the standard 580mm size panel and a 900mm panel for use behind hobs to height of extractor fan.

The drawings show the full size panels in the kitchen panel range and how the size of the tile appears on each panel. The different tile designs are only available in the colours shown.

Letter denotes surface finish: S - Silk · EM - Extra Matt · RU - Rustic · HG - High Gloss

Design K00Plain - No grout line

Shabby Chic RU 2898

Cracked Cement S - 2204

Design KM25Tile size: 150mm x 150mm

Sahara EM 5342

Denver White HG 3091

Design K40Tile size: 100mm x 100mm

Design K03Tile size: 300mm x 50mm

Anthracite HG 4054

Denver White HG 3091

22

Anthracite 4054-K03

Grey Sahara STN 4746

Design KM3010Tile size: 300mm x 100mm


PROFILES

Fibo profiles are designed for use with our wall panels to complete your installation correctly

Depending on the size and shape of your room, use the appropriate shaped profile to fit the panels correctly and securely into place. The use of an approved polymer sealant in conjunction with the profiles will ensure a watertight fit every time.

A BASE PROFILE MUST BE USED IN ALL AREAS WHERE PANELS WILL BE IN CONTACT WITH WATER.

INTERNAL PROFILEUse to fit panels into an inside 90° corner.

22.5mm

10.4mm

17.5mm

14mm

White PVC Aluminium

EXTERNAL PROFILEUse to fit panels around an outside 90° corner or in a window reveal or for edging box work.

White PVC

21mm

21.6mm19mm

19mm

35mm

24mm

Aluminium

FINISHING PROFILE (L - SHAPED OR J - SHAPED)

Use to finish off any raw outer edges of the panels or for edging box work.

12.7mm

25.5mm

6mm

17mm

12.7mm

White PVC or Aluminium

Aluminium Only

H-SHAPED STACKING PROFILEUse this profile to stack panels on top of each other in areas where the panel height required is more than 2400mm.

Note: Cannot be used with the Aqualock system.11mm

30mm18mm

11mm

25mm15mm

White PVC Aluminium

23

PROFILES

All Profiles are 2400mm long unless otherwise stated and are available in either standard white PVC or in anodised aluminium

SEALING OF ALL EXPOSED PLYWOOD IS ESSENTIAL TO ENSURE JOINTS ARE TOTALLY WATERPROOF.

KITCHEN PANEL BASE PROFILEUse in all wet areas to prevent water penetration from under the panel.

Install between bottom of panel and top of kitchen worktop.

19.5mm

14mm

Aluminium Only

Aluminium Only

13.2mm25mm

5mm

Aluminium Only

15mm

12mm

KITCHEN PANEL INTERNAL PROFILEUse to fit panels into an inside 90°corner.

This profile is 580mm long for a perfect fit to your kitchen panel.

KITCHEN PANEL L-SHAPED PROFILEUse to finish off any raw outer edges of the panels or for edging box work.

This profile is 580mm long for a perfect fit to your kitchen panel.

BASE PROFILEIt is essential to use a base profile in all wet areas to prevent water penetration from underneath the panel.

Aluminium Only

35.35mm

13mm

24

25 White Tile 2091-M66 and Roughwood 7969-M66

With our Aqualock tongue and groove system of fixing, Fibo panels are perfect for both refurbishment or new construction projects as panels can be fitted directly to existing walls, including tiles, or onto stud partitioning.

Using Fibo panels provides a wall that is every bit as effective as a tiled one, with a high quality and long lasting surface but without the disadvantages - no grouting to clean and replace, no mould growth, low maintenance, shorter installation time and lower fitting costs.

Distance between battens: Vertically - 600mm or 900mm Horizontally - 800mm

PREPARATION BEFORE INSTALLATIONPanels should be stored flat in their packaging and protected from moisture.

Being a wood product, they must be acclimatised in the room or area in which they are to be used for at least 3 days prior to fitting.

Before installing your Fibo panels to the wall, check that it is completely dry and level and provides a firm nail/screw hold. It is always preferable to attach panels to battens using screws and plugs or nails especially if the surface is uneven or out of plumb. There needs to be a vertical batten under every panel joint. Where heavy items are to be attached to the wall, extra battens must be installed to carry these.

Panels can also be glued to walls, studwork or on top of existing tiles provided they are sound and reasonably square. Walls should be dry and ceramic tiles should be degreased. Use a waterproof, high tensile strength glue applied to the back of the panel in a zig-zag pattern.

Use a plastic film between panels and an outside wall.

A BASE PROFILE MUST ALWAYS BE USED IN ANY WET AREAS. AS WITH ALL WOOD PRODUCTS, PANELS SHOULD BE ACCLIMATISED FOR THREE DAYS PRIOR TO FITTING. CHECK PANELS THOROUGHLY FOR DAMAGE, FLAWS, SHADING

OR DEFECTS BEFORE INSTALLATION AND REPORT ANY PROBLEMS TO YOUR SUPPLIER. GUARANTEE MAY BE INVALIDATED IF THESE PROCEDURES ARE NOT CARRIED OUT.

FIBO AQUALOCK

Tongue and groove system - making panel fitting as easy as 1,2,3...

1 2 3

800

600/900

3mm

Sealant

Apertures for pipes etc. The opening should have a clearance of approx. 5mm Seal the clearance with polymer sealant.

Panel cut outs Pre-drill with largest possible drill-bit before cutting.

CUTTING THE PANELSFibo panels are easy to cut – place panels decorative side down when cutting with circular saw or jigsaw.

Using a fine toothed handsaw, place decorative side up and cut on the down stroke only.

26

WHOLE ROOM INSTALLATION

Start here

Sealant

Sealant

Install panels using our Aqualock easy-to-fit tongue and groove system, clicking into place as you go. Check that the panels are correctly aligned and remember to use sealant in all the joints

Fibo wall panels with Aqualock are fixed to battens/walls by nailing or screwing into the groove running along the length of the panel using No. 6 screws or 35mm gypsum board nails. Leave a distance of 200mm between each nail/screw. The lowest nail/screw must be fastened a maximum of 20mm from the bottom of the panel.

In areas of high humidity, Fibo panels must be fitted with a polymer waterproof sealant in every joint and to all exposed edges to ensure that they are totally waterproof. Apply the sealant when the panel is upright against the wall, next to the previously installed panel. It is then easy to ‘lock’ the two panels together into position without creating a

mess. Run a bead of sealant along the length of the panel groove with a sufficient amount to provide a good seal for the panels once they are assembled.

Excess sealant in the joint must be removed at once and then sprayed with methylated spirit and wiped with a damp cloth. This will ensure a

virtually invisible joint.Where an installation is to go around a room, for best results, start fixing the panels in one corner, panelling in both directions so that the last wall to be panelled is the wall with the door. Finish up with the last panel

installed and cut to fit over the doorway.

STARTING A WALL When setting up the first panel, fix an internal corner profile to the wall and apply sealant into both channels. Cut the panel to size and push the clean cut panel edge firmly into the profile.

Fix the other side of the panel to the wall or batten by screwing or nailing along the tongue ensuring it is correctly aligned before securing. Countersink the screws so that they don’t catch on the panel. Install the next panel into the other side of the profile securing in place as before. Continue along the wall, clicking the panels into place after applying sealant into each joint.

FINISHING OFF A WALL The last panel of each run of a wall should be measured and cut to size and then swung into position with the internal corner profile already attached. The profile is then fastened to the stud or batten on the return wall. Ensure that sealant is applied into the profile channel before inserting the panel.

LAST PANEL OVER DOORWAY Cut the two panels left and right of the door so they have a centred space (full panel width) over the door frame. The last panel can be inserted tongue first on one side with the lip of the other edge removed to fit flush to the adjoining panel. Fix by gluing the back edge. Fit panels around the door frame with screws/nails which will be hidden by door moulding and coving.

CAREFULLY READ THE INSTRUCTIONS PROVIDED WITH THE PANELS BEFORE FIXING. PLEASE VISIT OUR WEBSITE TO VIEW AN ANIMATION OF THE INSTALLATION PROCESS.

27

INSTALLING PANELS IN A SHOWER

IN A TWO SIDED SHOWER ENCLOSURERemember to use a base profile fitted as per instructions for a wet area (see below)

1) Fix an internal corner profile to the wall first, remembering to countersink the screws so they won’t catch and then apply sealant into the two channels. If using mechanical fixing, insert the first panel into the prepared internal profile, push back the panel to the wall and screw it into place through the groove in the fixing lip. If gluing to the wall, first apply adhesive to the back of the panel then insert panel into the internal profile and push the panel back to the wall applying pressure to fix into place.

2) Insert the second panel into the other channel of the internal profile and fix into place as in step 1.

3) Finish the installation by fixing the L-shaped finishing profile to the exposed edges of the panels using sealant. If using a J-shaped profile, this should be fitted to the exposed edge of the panel with sealant prior to fixing into place as above. Wipe off any excess sealant from the panels using a damp cloth.

IN A THREE SIDED SHOWER ENCLOSURE • Remember to use a base profile fitted as per instructions for a wet area (see below) • In a 3 sided shower installation, the back panel must always be fitted first. • If using a 600mm or 900mm wide panel, remember to cut off the tongue of the panel to be used on the back wall.

1) Fix an internal corner profile to the left hand side corner and apply sealant into both channels.

2) Apply sealant into both channels of a second internal profile and attach to the right hand side of the panel that will form the back wall. Apply glue to the reverse side of the panel and insert this panel into the internal profile that is already attached to the wall and swing the panel into position to form the back of the enclosure, applying pressure to fix into place. Fix the second internal profile to the wall with screws, remembering to countersink them so they won’t catch.

3) Insert the second and third panels into the channels of the two internal profiles and fix into place either by screwing through the fixing lip of the opposite edge or, if using glue, ensuring that this is applied to the back of the panels before inserting into the internal profiles.

4) Finish the installation by using L-Shaped or J-shaped profiles as described before. Wipe off any excess sealant with a damp cloth.

IF USING 1200MM PANELS FOR A SHOWER ENCLOSURE, FOLLOW THE INSTRUCTIONS ABOVE BUT GLUE ALL THE PANELS TO THE WALL. SCREWS CANNOT BE USED IN THIS INSTANCE AS THESE PANELS DO NOT HAVE FIXING LIPS.

FITTING PANELS AT FLOOR LEVELDRY AREA

Height adjustments should be made where the panel meets the ceiling.

A. Where there is vinyl floor covering - the material should continue approx. 100mm up the wall behind the panel and the distance from the bottom of the panel to the floor should be 60-80mm

B. Where there is a ceramic tile or upstand - apply sealant between the bottom of the panel and the top of the upstand remembering to leave a gap of 4-5mm to allow for expansion of the sealant.

To ensure that you get a waterproof seal every time, make certain that all exposed plywood has sealant applied.

FAILURE TO INSTALL FIBO PANELS IN ACCORDANCE WITH MANUFACTURER INSTRUCTIONS MAY INVALIDATE THE GUARANTEE

WET AREA - In all wet areas a base profile must always be used.

BATH, SHOWER OR WETROOM

Height adjustments should be made where the panel meets the ceiling.

A. In a wetroom installation the floor covering should continue approx. 100mm behind the panel and the base profile. Sealant should be used both in front and behind the profile and the panel. The clearance between the bottom of the profile and the floor should be 60-80mm

B. When fitting over a bath or shower tray, or above a ceramic upstand, sealant must be applied in front and behind the base profile and the panel as well as between the bottom of the profile and the top of the bath, shower tray or upstand. Allow a gap of min 2-3mm under the base profile to allow for expansion of the sealant.

C. When fitting behind a bath or shower tray, always use a base profile between the bottom of the panel and the floor. Seal between the underside of the profile and the floor allowing a gap of min 2-3mm to allow for expansion of the sealant. You will also need to seal where the bath or shower tray meets the panel.

Sealant

60-80mm

Sealant

BaseProfile

FloorCovering

FloorCovering

A

Sealant

2-3mm

Bath /Shower Tray

BaseProfile

Sealant

B

Sealant

Sealant

Bath /Shower Tray

Sealant

BaseProfile

C

28

VinylFlooring Ceramic

Upstand

Sealant

A B

PRODUCT SPECIFICATION

Fibo Wall Panels provide instant waterproof, hygienic walls with a choice from an attractive range of colours and finishes. Suitable for use in all areas of high humidity within

a domestic or commercial environment.

CONSTRUCTIONFibo panels have a decorative, high pressure laminate surface, bonded to a specially developed high quality 9mm 7 layer WBP Plywood core with a balancer laminate on the reverse. Each panel with the Aqualock system is tongue and grooved on its longest side. The plywood core material is PEFC certified - refer to website to download certificates. Panels are manufactured in an ISO 9001 quality assured environment.

FIRE CERTIFICATEFibo wall panels have a Class 1 Spread of Flame tested to NS-EN 13501-1:2007+A1:2009. Fire Certificate: D-s1.d0

HEAT RESISTANCEDo not expose the laminate surface to sustained high temperatures - max 180 degrees Centigrade or 356 Fahrenheit.

CLEANING AND MAINTENANCESimply wipe with a damp cloth or a mild non-abrasive cream cleaner.

Household disinfectants and detergents do not affect the durable surface.

Do not use steam cleaning devices on our panels.

GUARANTEEFibo offers the domestic consumer a 15 year guarantee, from the date of purchase, that the wall panels will remain watertight and will neither crack nor delaminate. Base profiles must be used with shower trays and in all wet areas with appropriate polymer sealant to prevent water damage occurring. Remember to acclimatise the panels for 3 days prior to fitting. The guarantee will be void if panels are not fitted according to the manufacturers’ instructions (supplied with panels).

SIZE AND WEIGHTStandard Wall Panel: 600mm x 2400mm x 10.2mm Weight Approx: 12kg per panel

Shower Panel: 900mm x 2400mm x 10.2mm Weight Approx: 18kg per panel

Shower Wall: 1200mm x 2400mm x 10.2mm Weight Approx: 24kg per panel

Standard Kitchen Panel:600mm x 580mm x 10.2mmWeight Approx: 2.3kg per panel

Kitchen Hob Panel:600mm x 900mm x 10.2mmWeight Approx: 4.3kg per panel

Product CE marking: 1071-CPD-0149 - 2004 EN 13986-2004 EN636-2 EN335-3 Class 2 Formaldehyde E1

29

ABOUT US

Our wall panels are manufactured in Norway by Fibo which is the leading

manufacturer and supplier of wall panels in Scandinavia.

With two warehouses in England and Scotland, Fibo panels are offered for sale through a network of stockists and distributors throughout the UK. Please check with our Sales Office for your nearest supplier.

FIBO AND THE ENVIRONMENTFibo UK Limited believe that businesses are responsible for achieving good environmental practice and operating in a sustainable manner.

We are therefore committed to reducing our environmental impact and continually improving our environmental performance as an integral and fundamental part of our business strategy and operating methods.

It is our priority to encourage our customers, suppliers and all business associates to do the same. Not only is this sound commercial sense for all; it is also a matter of delivering on our duty of care towards future generations.

Our policy is to:

• Wholly support and comply with or exceed the requirements of current environmental legislation and codes of practice.

• Minimise our waste and then reuse or recycle as much of it as possible.

• Minimise energy and water usage in our buildings, vehicles and processes in order to conserve supplies, and minimise our consumption of natural resources, especially where they are non-renewable.

• Operate and maintain company vehicles (where appropriate) with due regard to environmental issues as far as reasonably practical and encourage

the use of alternative means of transport and car sharing as appropriate.

• Apply the principles of continuous improvement in respect of air, water, noise and light pollution from our premises and reduce any impacts from our operations on the environment and local community.

• As far as possible purchase products and services that do the least damage to the environment and encourage others to do the same.

• Assess the environmental impact of any new processes or products we intend to introduce in advance.

30

BEYOND TILES

The Fibo factory in Lyngdal, Norway

FIBO UK LIMITED, Watermeadow House, Chesham, Buckinghamshire HP5 1LF

Tel: 01494 771242 Fax: 01494 771292 Email: [email protected]

www.fibo.co.uk

NORWEGIANACCREDITATION

No S03

NS ISO 9001 CERTIFICATED FIRM

Q U A L I T YA S S U R E D

GUARANTEE

FIBO

UK LIMITED15YEARS

by beyond tiles - norman piette · 2020-03-31 · design f23 tile size: 200mm x 300mm ivory tile g...

Documents