butterfly valve specialists
TRANSCRIPT
BUTTERFLY VALVE SPECIALISTS
Frenstar delivers small, medium and large butterfly valve projects to both onshore and offshore facilities within UKCS and globally.
From MRO stock projects, to time sensitive, fully manufactured projects, Frenstar has a reputation for successfully delivering valves across a vast range of projects.
Our Project Management service is unrivalled on safety, cost, compliance and efficiency, while our project execution offers significant value added benefits to our clients worldwide.
The structure of the business means that Frenstar has the ability to manage pre-planned projects as well as provide a fast track responsive service for critical repair work.
Frenstar delivers Valve and Actuation solutions within the following specialist areas:
Offshore FacilitiesComprehensive expertise in valve solutions for offshore facilities ranging from minor upgrades to large-scale greenfield projects. Frenstar are well established as the go-to stockist for Brownfield UKCS MRO work scopes.
This exceptional reputation comes as a result of our fast track, flexible nature and ability to dispatch same day on urgent projects.
Onshore FacilitiesWe offer expertise in onshore oil and gas refineries and terminals to deliver tailored solutions to meet the service requirements of such facilities.
Other industry segments serviced:• Petrochemicals• Water & Waste Water Treatment• Process & Chemicals• Pharmaceutical• Power • Fertiliser
Decommissioning Frenstar offers a range of solutions tailored specifically toward decommissioning and peak asset management. These solutions offer the flexibility needed to suit the end of service and decommissioning requirements.
WHAT WE DO
QUALITY AND SAFETY INTEGRAL TO OUR SERVICE
Frenstar provides valve project engineering services for all types of projects, including offshore, onshore, floating and mobile production facilities.
Specialising in butterfly valve projects, Frenstar is a recognised industry leader in the delivery of projects with demanding time frames. With a large stock holding, we offer a wide range of materials and sizes, meaning we can fulfill urgent deliveries. We see efficiency as key to successful project execution.
We strive to add value for customers utilising our engineering expertise. We also have the ability to call on our skilled strategic partners and suppliers with whom we have well ingrained relationships. Long-term framework contracts with major end users are testament to our industry reputation. Our services also include:
Procurement Our procurement and supply management processes and procedures allow us to
manage suppliers on behalf of our customers. This has built customer trust due to predictable project execution.
Document Management A fundamental element of any project, documentation management is paramount to Frenstar. We are ISO 9001-2015 accredited. Our technical quality checks of all documentation ensure traceability during project execution and handover to client.
Responsiveness Our dedicated team offers fast track, cost effective solutions for maintenance and modification work scopes.
TestingFrenstar provides in-house valve testing tailored to client specifications, while also hosting third party witness inspections as required.
OUR SERVICES
VALVE ENGINEERING
PROJECT MANAGEMENT
DOCUMENTATIONPROCUREMENT
CONCENTRIC RUBBER LINED BUTTERFLY VALVES
PRODUCT DESIGN DATA
Description BUTTERFLY VALVEConcentric Rubber Lined
Design Code API 609 / EN593
Size Range NPS 1½” - 48” / DN 40- 1200
Maximum Pressure /Rating
IVGK / IVTL 20 bar 150#IVDF 16 bar PN16
Design Temperature
-40ºC to +180ºC
Seat Leakage Bubbletight EN12266-1 rate A / Bi-directional
End Connections Wafer / Lug / Double Flanged
Face to Face API609 Cat A Table 2 & 3C
Body Seat IVGK - Replaceable / BondedIVTL / IVDF - Bonded to body
Intervalve-IVGK Wafer Concentric
Intervalve-IVTL Lugged Concentric
Intervalve-IVDF Double Flanged Concentric
MATERIALS OF CONSTRUCTION
BODY
Ductile Iron / Cast Iron
GGG40, GG25
Carbon Steels inc. Low Temp
WCB, LCB, LCC
Austenitic/ Super Austenitic Stainless Steels
CF8, CF8M, CF3M, 6MO
Copper Alloys Aluminium bronze
Duplex/Super Duplex Alloys (1A-6A)
CD3MWCuN, CD4MCuN
Superalloys Hastelloy® B, C, Inconel
Nickel Alloys Monel®, Alloy 20
Others upon request
SHAFT AISI 410, AISI316, 17-4Ph, Monel® K500, UNS32760, Titanium
SEAT Nitrile, EPDM, Viton, Hypalon, Silicone, Neoprene
APPROVALS API609 API 598ASME B16.34 BS EN593
CERTIFICATION EN 10204 – 2.2/3.1/3.2
ATEXPED – Category IIINACEDOT RULE 54B
DOUBLE OFFSET BUTTERFLY VALVES
PRODUCT DESIGN DATA
Description BUTTERFLY VALVE High Performance Double Offset Fire Safe
Design Code API 609 / EN593
Size Range NPS 2” - 50” / DN 50- 1250
Maximum Pressure / Rating
20 bar - 150#/ 50bar - 300#
Design Temperature
-50ºC to +500ºC (MOC Dependant)
Seat Leakage Bubbletight EN12266-1 rate A /Bi-directional
End Connections Wafer / Lug
Face to Face API609 Cat B Table 3A
Body Seat PTFE / RPTFE / Metal
MODELS
IVEX-T Non Firesafe
IVEX-F Firesafe
IVEX-M Firesafe Metal Seated
DOUBLE OFFSETA high performance butterfly valve. This valve has two stems offset from the centre. It is capable of providing accurate, stable, throttle flow control.
High-performance butterfly valvesare a lower-cost valve option with benefits including high-quality to API 609, firesafe and they will seal against flow from either direction.
The double offset butterfly valve is generally used in:
• Oil & Gas• Petrochemical• Power Generation• Process & Chemicals• Water & Wastewater Treatment• Marine
MATERIALS OF CONSTRUCTION
BODY
Carbon Steels inc. Low Temp
WCB, LCB, LCC
Austenitic/ Super Austenitic Stainless Steels
CF8, CF8M, CF3M, 6MO
Copper Alloys Aluminium bronze
Duplex/ Super Duplex Alloys (1A-6A)
CD3MWCuN, CD4MCuN
Superalloys Hastelloy® B, C, Inconel
Nickel Alloys Monel®, Alloy 20
Others upon request
SHAFT AISI 410, AISI316, 17-4Ph, Monel® K500, UNS32760, Titanium
SEAT PTFE, RPTFE, Inconel 625, SS316
APPROVALS API609API598 ASME B16.34 BS EN593
CERTIFICATION EN 10204 – 2.2/3.1/3.2
ATEX PED – Category IIIAPI 607NACE
TRIPLE OFFSET BUTTERFLY VALVES
PRODUCT DESIGN DATA
Description BUTTERFLY VALVEHigh PerformanceTriple Offset Metal Seated Fire SafeCryogenic Triple Offset High Performance Butterfly Valve also available
Design Code API 609 / EN593
Size Range NPS 3” – 96” / DN 80-2400
Maximum Pressure /Rating
150# to 1500#
Design Temperature
-196°C to +600°C (MOC Dependant)
End Connections Wafer / Lug / Double Flanged / Butt-Weld
Face to Face API609 Cat B Table 3A & 3C
Body Seat Metal + GRAPHITESolid Metal
Seat Leakage Bi-Directional Bubble Tight Shutoff (CL.150 ~ 600)Uni-Directional Bubble Tight Shutoff (CL.900 ~1500)
MODELS
TOV – L Lugged high performance Triple Offset Butterfly Valve
TOV – W Wafer non-lugged high performance Triple Offset Butterfly Valve
TOV – F Double Flanged high performance Triple Offset Butterfly Valve
TRIPLE OFFSETA high performance butterfly valve. This valve has three offsets from the centre. The third offset is the elliptical seat geometry. This along with the two eccentric shaft offsets, allows the disc to seal against the seat with no friction.
This seat design allows for uniform sealing, and thus bi-directional tightness at maximum differential pressure.
This triple eccentric design is a lower cost, lower torque option, than alternative style metal seated valves. It is low maintenance and offers an extended valve life.
The triple offset butterfly valve is used in critical demanding applications in:
• Oil & Gas• Petrochemical• Power Generation• Process & Chemicals• Water & Wastewater Treatment• Marine
MATERIALS OF CONSTRUCTION
BODY
Carbon Steels inc. Low Temp
WCB, LCB, LCC
Austenitic/ Super Austenitic Stainless Steels
CF8, CF8M, CF3M, 6MO
Copper Alloys Aluminium bronze
Duplex/ Super Duplex Alloys (1A-6A)
CD3MWCuN, CD4MCuN
Superalloys Hastelloy® B, C, Inconel
Nickel Alloys Monel®, Alloy 20
Others upon request
SHAFT AISI 410, AISI316, 17-4Ph, Monel® K500, UNS32760, Titanium
SEAT SS304 / SS316 / SS316L / Inconel with Graphite or PTFE
HARD-FACING Stellite Gr. 6 / Gr.21 / 13% Cr. Weld Overlay
APPROVALS API609API598 ASME B16.34 BS EN593
CERTIFICATION EN 10204 – 2.2/3.1/3.2
ATEX PED – Category IIIAPI 607NACE
VALVE ACTUATION
PRODUCT DESIGN DATA
Pressure Up to 8 bar
Temperature - 20° to 80° C
Media Air (dry or lubricated)Non-corrosive gas or light hydraulic oil
Construction Suitable for indoor or outdoor installation
Material Housing - Aluminium Alloy
Drive Shaft Carbon Steel
Finish Two coat polyurethane
Rotation (Standard)
Counter clockwise to open with port a pressurisedSpring return Actuators air fail to close clockwise
Movement (Standard)
91.5°C from -0.5°C to 91° counter-clockwise
Lubrication Factory lubricated for the normal life of Actuators
Life 500,000 operations minimum
EL-O-MATIC/INTERVALVE ACTUATORSFrenstar offer an extensive range of pneumatic, electric and hydraulic actuators with accessories:• Single Acting Spring Return• Double Acting• Pneumatic Type• Hydraulic Type• Electric Type
Frenstar can supply Butterfly valves complete with factory fitted pneumatic El-O-Matic/Intervalve actuators. EL-O-Matic Pneumatic actuators are powerful and compact double rack and pinion units for use with ball, butterfly and plug valves and any device requiring accurate and dependable quarter turn rotary motion.
EL-O-Matic’s patented 3 point piston support provides a tough reliable unit for the automation of today’s high performance industrial valves. Safety features include an anti-blow out spindle and a spring retaining system which ensures no spring tension on disassembly.
‘E’ Series actuators incorporate a body of cast aluminium and have pistons where the rack teeth are precision machined onto the aluminium casting. Spring return versions have a maximum of 6 springs, 3 in each end cap assembled as a concentric stack.
‘P’ Series actuators cover the large end of the torque range. These all incorporate a body of cast aluminium and have steel for the rack on pinion drive. Spring return versions have a maximum of 14 springs 7 in each end cap assembled within a hexagon pattern.
Options:
• Double Acting Actuator• Single Acting Actuator• Actuator with carbon steel housing for
offshore/arduous duties • Actuator with 180° rotation • Three position Actuator• Limit stops in the end caps• Limit stop with Limit stop plate• Actuator with ±3° extra travel • Full system supply including
switchboxes, solenoid valves, positioners etc.
• Significantly reduces cost• Saves time • Excellent lead times • Factory tested, ready for immediate installation • Full manufacturers warranty for valve and
actuator system
BENEFITS OF SUPPLYING WITH FACTORY FITTED ACTUATORS
E Series Pneumatic Rack & Pinion Actuators
BALL VALVES
PRODUCT DESIGN DATA
Size Range 1/2″ – 56″ (DN15 – DN1400)
Manufacturing Standard
API 6D, EN-17292, NACE MR 01 75
Pressure Class ASME CLASS 150 to 2500DIN-PN PN 10 to 64API 3000 to 10000
Materials of Construction
Carbon & low alloy SteelsStainless steelsDuplex & Super DuplexNickel AlloysTitanium
Frenstar offer a wide range of Ball valves from our dedicated factory to the finest quality for use within various industries.
• Floating or Trunnion Mounted• Double Block and Bleed• Multiport 3-way ball valves• Soft or Metal Seated• Fire safe certified• Cryogenic service
DESIGN FEATURES
BALL VALVES
• API 6D/6A design & construction• API 6D & ASME B1610 face to face• Antistatic device• Drain plug• Firesafe design• O-ring seals• Self-Relieving seat• Soft seat insert• Trunnion mounted• Lifting lugs / valve support• Vent plug
TRUNNION
FLOATING• API 6D/6A design & construction• API 6D & ASME B1610 face to face• Antistatic device• Firesafe design• O-ring seals• Soft seat insert• Solid ball
OPTIONAL DESIGN FEATURES• Automatic bleeding system• By-pass system• Double Piston Effect (DPE)• Double Isolation & Bleed (DIB)• ENP on seat/ball/stem/body• Extended stem• Heating jacket• Locking device• Metal to metal seats• Overlay on seat pocket• Overlay on dynamic seal pockets• Overlay on all wetted parts• Polymeric lip-seals• Single Piston Effect• Stem injection fitting• Seat injection fitting• Transition pups pieces BW ends
OPTIONAL DESIGN FEATURES• Extended stem• Heating jacket• Locking device• Metal to metal seats• Overlay on all wetted parts• Drain plug• Stem injection fitting
Frenstar can provide a valve automation service which includes design, manufacture, assembly and testing of actuated ball valve assemblies.
AUTOMATION SERVICE
AIR VACUUM VALVES
PRODUCT DESIGN DATA
Size Range DN25mm – DN100mm
Manufacturing Standard
API2000
Pressure Class 0.4 – 20bar
Temperature Range
-10°C – 60°C
Materials of Construction
Super duplex, Titanium, Stainless Steel, 6MO, Hastelloy, Monel, Inconel, Ali bronze
AIR VACUUM VALVESFrenstar offer Air Valves from our dedicated factory to the finest quality.
Our UK manufactured air valves are tailored for the global oil and gas, petrochemical and marine sectors. The materials available are compliant and offer outstanding protection for severe offshore environments and seawater service. We utilise UK foundries that are Norsok M-650 approved and any raw materials are from within the UK / EU.
Air release valves are used in pressurised pipe work systems to vent off unwanted air within them. Trapped air rises and collects within the high points of the system. Air vented water fills the valve, raising the float until the valve seat is pushed back against the orifice closing it off from atmosphere again.
WHY USE AIR VALVES?• Single function (Air Release)• Bi functional (Vent & Vacuum)• Tri functional (Combination)
Frenstar provides an automatic air exhaust function on the valve so as to avoid creating water hammer in the pipeline.
An automatic exhaust of air in the pipeline will prevent the pipeline being damaged by an air pocket and ensure smooth water flow.
Material testing is available to NORSOK MDS, TR2000, individual company or project requirements.
MODELS
ADDITIONAL SERVICES
GEARBOXES, CHAINWHEELS & EXTENSIONS
• Hydrostatic, Pneumatic & Nitrogen Gas Testing
• Magnetic Particle Testing• Dye Penetrant Inspection
(either red dye or fluorescent, on non porous materials)
• Radiographic Examination (Gamma & X-Ray)
• Ultrasonic Testing• Positive Material Identification
TESTING SERVICES
COATING SERVICES
• Surface Preparation, Blasting & Peening• Industrial Coatings
Extensive experience in the application of industrial coatings
• Thermal Spray Coatings TSA (Thermal Sprayed Aluminium)
• Specialist Coatings Phosphating, Xylan & Powder Coatings
WHY US?
QUALITY ASSURANCE
DELIVERY COST EFFECTIVE
SOLUTIONS
ENGINEERING EXPERTISE
EFFICIENCY AFTER SALES SUPPORT
OUR CLIENTS
IN-LINE INTERNATIONALLY
CASPIAN
NORWAY, DENMARK & THE NETHERLANDS
UNITED KINGDOM
WESTERN AUSTRALIA
SOUTH EAST ASIA
MIDDLE EAST
CANADA
NORTH & WEST AFRICA
BRAZIL
GULF OF MEXICO
CENTRAL EUROPE
NOTES
Unit 4, 38-40 Duncrue CrescentBelfast, Northern Ireland, United Kingdom BT3 9BW
Tel: +44 (0) 2890 020190Email: [email protected]: www.frenstar.co.uk