butt welding machines manual welders welders.pdf · manual welders butt welding machines manual...

15

Upload: vankhanh

Post on 30-Jun-2018

245 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

BUTT WELDING MACHINESMANUAL WELDERS

These welders are controlled directly by the operator who, by hand or by means of a

mechanical spring system, supplies the welding force directly to the elements to join.

Their use is recommended when the operator must weld pipes and/or fittings that will not be

subjected to stress due to internal pressure after being laid. They are particularly suitable for

liquid drainage systems in both civil and industrial fields, made in Polyethylene (PE).

• HEATING PLATES page 14

• MINI 160 AC page 16

• MINI 160 SUPRA page 18

• VS 160 AC page 20

• VS 160 SUPRA page 22

• VR 250 page 24

• MAXI 315 page 26

Page 2: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

14

HEATING PLATES

Manual equipment featuring an Aluminium heating plate coated with anon-stick material (PTFE) and a practical, heat insulated plastic handle.Available with a fixed mechanical thermostat (TF) and with an adjustableelectronic thermoregulator (TE), with different working shapes and rangesaccording to the requirements.The TP L 500, available only in the version with an adjustable electronicthermoregulator (TE), is used for welding plastic sheets, but is particularlyindicated in “Waterstop” joins (used in the construction sector).

SUPPLIED WITH

All models are supplied with:- Heating plate;- Fork support.

ON REQUEST (ACCESSORIES)

- Bench vices (the same for all models, except for the TP 300);- Carrying cases in electro-painted steel;- Plate covers;- Footboard (not available for the TP 300 and TP L 500 models);- Gloves (for protection).

TP 125

TP 125/45°

TP 200

TP 300

Fork support

TP L 500

Page 3: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

15

Dimensions (W x D x H)

75 x 65 x 225 mm75 x 65 x 270 mm - TP 300

Weight0,75 Kg

0,80 Kg - TP 300

Bench vices

Dimensions(W x D x H)

410 x 205 x 92 mm

Weight

1,5 Kg

Footboard (not available for the TP 300 and TP L 500 models)

Model

TP 125TP 125/45°TP 200TP 300TP L 500

Dimensions(W x D x H)

300 x 100 x 480 mm260 x 127 x 440 mm295 x 104 x 550 mm350 x 170 x 620 mm240 x 165 x 855 mm

Weight

3,12 Kg3,20 Kg 3,50 Kg4,83 Kg8,63 Kg

Steel cases

(*) Available in 110 V -Single-phase - 50/60 Hzfor TP 125 TE -700 W, TP 200 TE -850 W and TP 300 TE -1300 W

(B) Maximum weldable profile

Steel case

Plate cover

Footboard

Gloves

Power supply (*)Working temperature

Ambient temperatureTime to reach welding temperature

(A) Materials

230 V - Single phase - 50/60 HzTF: 210°C (PE)

TE: 180 ÷ 280°C (A)-5 ÷ +40°C

TF: ~ 15 min. (25 min.TP 300)TE: ~ 10 min. (15 min. TP L 500)

PE, PP, PB, PVDF

TECHNICAL FEATURES

Model

TP 125TP 125/45°

TP 200TP 300

TP L 500

Pipe max Ø(O.D. )

110 mm110 mm180 mm280 mm

500 x 55 mm (B)

Absorbedpower700 W500 W1200 W1300 W1500 W

Dimensions (W x D x H)

140 x 50 x 410 mm140 x 130 x 370 mm200 x 50 x 440 mm300 x 50 x 550 mm270 x 50 x 750 mm

Weight

2,16 Kg1,95 Kg3,21 Kg5,09 Kg2,45 Kg

Dimensions (W x D x H)225 x 195 x 90 mm 160 x 360 x 240 mm - TP 300

Weight0,40 Kg

0,60 Kg - TP 300

Fork supports

Bench vice

Page 4: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

16

MINI 160 AC

An ideal welding machine for drainage pipes up to Ø160 mm.It consists of a machine body with a pressure regulating device, a pair ofclamps, two lateral supports, an electrically controlled milling cutter forlevelling the ends of the pipe and/or fitting with a safety microswitch, anextractable heating plate with automatic device to control the temperature, asliding support, and a tubular frame that acts also as a work bench andprotection when transporting.The MINI 160 AC can also weld fittings, like bends and tees.

SUPPLIED WITH

- Machine body with a milling cutter, lateral supports and service spanners;

- TP 200 TF plate;- Right clamp Ø160 AC;- Left clamp Ø160 AC;- Frame;- Steel case with adapters for clamps and lateral supports

Ø 40-125 mm (Ø 56 and 140 mm on request).

ON REQUEST (ACCESSORIES)

- TP 200 TE plate;- Set of clamps adapters AC Ø56 and 140 mm (4 pcs./Ø)

[Ø supplied singly];- Set of lateral supports adapters Ø56 and 140 mm (2 pcs./Ø)

[Ø supplied singly];- Plate cover for TP 200;- Gloves (for protection).

MINI 160 AC

Machine body

Lateral supports and adapters

TP 200

Page 5: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

17

Weight (Kg) AC clamp adapters (4 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø110 Ø125 Ø1401,43 1,41 1,34 1,33 1,28 1,16 0,91 0,78 0,60Total weight: 10,24 Kg

Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16Total weight : 2,53 Kg

Working rangePower supply Power absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature

Ambient temperatureTime to reach welding temperature(A) Materials

DIMENSIONS (W x D x H)FrameTP 200 plate Steel case with adapters AC clamps set Machine being transported Machine being used

WEIGHTFrameTP 200 plateSteel case with adaptersAC clamps set Machine with “SUPPLIED WITH”

40 ÷ 160 mm230 V - Single phase -50/60Hz

1200 W650 W1850 W

TF: 210°C (PE)TE: 180 ÷ 280°C (A)

-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.

PE, PP, PB, PVDF

525 x 470 x 710 mmSee page 15

200 x 235 x 100 mm170 x 15 x 279 mm525 x 480 x 710 mm800 x 930 x 1140 mm

4,00 KgSee page 15

1,54 Kg2,59 Kg50,60 Kg

TECHNICAL FEATURES

AC clamps and adapters

MINI frame support

AC steel case

MINI being transported

Plate cover and gloves

Page 6: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

18

The meaning of SUPRA

This word identifies the different

type of clamps mounted on this

welding machine. They have been

specifically designed to be able to

lock “branch” fittings (shaped like

a Y): with extractable and

interchangeable jaws, shaped

according to the diameter to weld, it

is possible to lock all branch points

(drawings 1, 2, 3).

MINI 160 SUPRA

An ideal welding machine for drainage pipes up to Ø160 mm.It consists of a machine body with a pressure regulating device, a pair ofclamps, two lateral supports, an electrically controlled milling cutter forlevelling the ends of the pipe and/or fitting with a safety microswitch, anextractable heating plate with automatic device to control the temperature, asliding support, and a tubular frame that acts also as a work bench andprotection when transporting.The MINI 160 SUPRA can also weld fittings like bends, tees and brancheswithout any additional equipment.

SUPPLIED WITH

- Machine body with a milling cutter, lateral supports and service spanners;

- TP 200 TF plate;- Lower right (half) clamp Ø 160 SUPRA;- Lower left (half) clamp Ø160 SUPRA;- Frame;- Steel case complete with extractable upper jaws SUPRA

Ø 40 - 160 mm, lower (half) clamps and lateral supports adapters Ø 40 - Ø125 mm (Ø 56 and 140 mm on request).

ON REQUEST (ACCESSORIES)

- TP 200 TE plate;- Lower (half) clamps adapters Ø 56 and 140 mm (2 pieces/Ø)

[Ø supplied singly];- Left/right extractable upper jaws SUPRA Ø 56 mm and 140 mm

(2 pieces/Ø) [Ø supplied singly];- Lateral supports adapters Ø56 mm and 140 mm (2 pieces/Ø)

[Ø supplied singly];- Plate cover for TP 200;- Gloves (for protection).

Machine body

TP 200

Lateral supports and adapters

MINI 160 SUPRA

drawing 1

drawing 2

drawing 3

Page 7: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

19

Weight (Kg) extractable upper jaws (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 1600,90 0,90 0,90 1,14 1,12 1,14 1,10 1,22 1,12 1,10

Total weight: 10,64 Kg

WEIGHTFrameTP 200 plateSteel case with adaptersLower (half) clamps SUPRAMachine with “SUPPLIED WITH”

40 ÷ 160 mm230 V - Single phase - 50/60 Hz

1200 W650 W1850 W

TF: 210°C TE: 180 ÷ 280°C (A)

-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.

PE, PP, PB, PVDF

525 x 470 x 710 mmSee page 15

535 x 230 x 110 mm174 x 15 x 279 mm525 x 480 x 710 mm800 x 930 x 1140 mm

TECHNICAL FEATURES

SUPRA clamps and adapters

MINI frame support

SUPRA steel case

MINI being transported

Plate cover and gloves

Weight (Kg) clamps adapters (lower half) (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,72 0,71 0,67 0,66 0,64 0,58 0,46 0,39 0,30

Total weight: 5,13 Kg

Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16

Total weight: 2,53 Kg

Working rangePower supplyPower absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature

Ambient temperatureTime to reach welding temperature

(A) Materials

DIMENSIONS (W x D x H)FrameTP 200 plateSteel case with adaptersLower (half) clamps SUPRAMachine being transported Machine being used

4,00 KgSee page 15

3,54 Kg1,33 Kg54,00 Kg

Page 8: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

20

Lateral supports and adapters

VS 160 AC

An ideal welding machine for drainage pipes up to Ø160 mm.

It consists of a machine body with a pressure regulating device, a pair of

clamps, two lateral supports, an electrically controlled milling cutter for

levelling the ends of the pipe and/or fitting with a safety microswitch, an

extractable heating plate with automatic device to control the temperature, a

sliding support and heat protection grid, a steel case that acts as a work

bench and cover when transporting the machine.

The VS 160 AC can weld fittings such as bends and tees.

SUPPLIED WITH

- Machine body with a milling cutter, lateral supports, adapters for

clamps and adapters for lateral supports Ø 40 - Ø 125 mm

(Ø 56 and 140 mm on request) and service spanners;

- TP 200 TF plate;

- Right clamp Ø160 AC;

- Left clamp Ø160 AC;

- Steel case (for transporting and for use as a work bench).

ON REQUEST (ACCESSORIES)

- TP 200 TE plate;

- Clamps adapters AC Ø 56 and 140 mm (4 pieces/Ø)

[Ø supplied singly];

- Lateral supports adapters Ø 56 and 140 mm (2 pieces/Ø)

[Ø supplied singly];

- Plate cover for TP 200;

- Gloves (for protection).

VS 160 AC

Machine body

TP 200

Page 9: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

21

40 ÷ 160 mm230 V - Single phase - 50/60 Hz

1200 W650 W1850 W

TF: 210°C (PE) TE: 180 ÷ 280°C (A)

-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.

PE, PP, PB, PVDF

805 x 565 x 705 mmSee page 15

235 x 20 x 356 mm835 x 565 x 760 mm

1055 x 925 x 1310 mm

20,00 KgSee page 15

2,76 Kg94,45 Kg

TECHNICAL FEATURES

AC clamps and adapters

Steel case

Plate cover and gloves

Weight (Kg) AC clamp adapters (4 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1401,43 1,41 1,34 1,33 1,28 1,16 0,91 0,78 0,60

Total weight: 10,24 Kg

Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16

Total weight: 2,53 Kg

Working rangePower supplyPower absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature

Ambient temperatureTime to reach welding temperature

(A) Materials

DIMENSIONS (W x D x H)Steel caseTP 200 plateAC clamps set Machine being transportedMachine being used

WEIGHTSteel caseTP 200 plateAC clamps setMachine with “SUPPLIED WITH”

Page 10: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

The meaning of SUPRA

This word identifies the different

type of clamps mounted on this

welding machine. They have been

specifically designed to be able to

lock “branch” fittings (shaped like

a Y): with extractable and

interchangeable jaws, shaped

according to the diameter to weld, it

is possible to lock all branch points

(drawings 1, 2, 3).

drawing 1

drawing 2

drawing 3

MA

NU

AL

WE

LDE

RS

22

VS 160 SUPRA

An ideal welding machine for drainage pipes up to Ø160 mm. It consists

of a machine body with a pressure regulating device, a pair of clamps, two

lateral supports, an electrically controlled milling cutter for levelling the ends

of the pipe and/or fitting with a safety microswitch, an extractable heating

plate with automatic device to control the temperature, a sliding support and

heat protection grid, a steel case that acts as a work bench and cover when

transporting the machine.

The VS 160 SUPRA can weld fittings such as bends, tees and branches

without the need for any additional equipment.

SUPPLIED WITH

- Machine body with a milling cutter, lateral supports, lower (half)

clamps adapters and lateral supports adapters Ø 40 - Ø125 mm

(Ø 56 and 140 mm on request) and service spanners;

- TP 200 TF plate;

- Lower right (half) clamp Ø 160 SUPRA;

- Lower left (half) clamp Ø160 SUPRA;

- Steel case (for transporting and for use as a work bench);

- Extractable upper jaws SUPRA Ø 40 - Ø160 mm

(Ø 56 and 140 mm on request).

ON REQUEST (ACCESSORIES)

- TP 200 TE plate;

- Lower (half) clamps adapters Ø 56 and 140 mm (2 pieces/Ø)

[Ø supplied singly];

- Left/right extractable upper jaws SUPRA Ø 56 and 140 mm

(2 pieces/Ø) [Ø supplied singly];

- Lateral supports adapters Ø 56 and 140 mm (2 pieces/Ø)

[Ø supplied singly];

- Plate cover for TP 200;

- Gloves (for protection)

VS 160 SUPRA

Machine body

Lateral support

TP 200

Page 11: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

23

TECHNICAL FEATURES

SUPRA clamps and adapters

Steel case

Plate cover and gloves

Weight (Kg) extractable upper jaws (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 1600,90 0,90 0,90 1,14 1,12 1,14 1,10 1,22 1,12 1,10

Total weight: 10,64 Kg

Weight (Kg) clamps adapters (lower half) (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,72 0,71 0,67 0,66 0,64 0,58 0,46 0,39 0,30

Total weight: 5,13 Kg

Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 40 Ø 50 Ø 56 Ø 63 Ø 75 Ø 90 Ø 110 Ø 125 Ø 1400,35 0,34 0,33 0,32 0,30 0,28 0,24 0,21 0,16

Total weight: 2,53 Kg

Working rangePower supplyPower absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperature

Ambient temperatureTime to reach welding temperature

(A) Materials

DIMENSIONS (W x D x H)Steel caseTP 200 plateLower (half) clamps SUPRAMachine being transported Machine being used

WEIGHTSteel caseTP 200 plateLower (half) clamps SUPRAMachine with “SUPPLIED WITH”

40 ÷ 160 mm230 V - Single phase - 50/60 Hz

1200 W650 W1850 W

TF: 210°C (PE)TE: 180 ÷ 280°C (A)

-5 ÷ +40°CTF: ~ 15 min.TE: ~ 10 min.

PE, PP, PB, PVDF

805 x 565 x 705 mmSee page 15

240 x 20 x 363 mm835 x 565 x 760 mm

1055 x 925 x 1310 mm

20,00 KgSee page 15

2,02 Kg98,50 Kg

Page 12: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

The meaning of SUPRA

This word identifies the different

type of clamps mounted on this

welding machine. They have been

specifically designed to be able to

lock “branch” fittings (shaped like

a Y): with extractable and

interchangeable jaws, shaped

according to the diameter to weld, it

is possible to lock all branch points

(drawings 1, 2, 3).

drawing 1

drawing 2

drawing 3

MA

NU

AL

WE

LDE

RS

24

VR 250

A professional welding machine ideal for medium sized pipes and sewersup to Ø250 mm. It consists of a machine body with a pressure regulatingdevice, a pair of clamps, two lateral supports, an electrically controlled millingcutter for levelling the ends of the pipe and/or fitting with a safety microswitch,an extractable heating plate with automatic device to control the temperature,a sliding support and a steel case that acts as a work bench and cover whentransporting the machine.The VR 250 can weld fittings such as bends and tees. Branches can alsobe welded thanks to the upper extractable jaws (on request) called SUPRA.Available in 110 V and 230 V.

SUPPLIED WITH

- Machine body with a milling cutter, lateral supports, clamps adapters and lateral supports adapters Ø 75 - Ø 250 mm(Ø 140 and 180 mm on request) and service spanners;

- TP VR 250 TE plate;- Right clamp Ø 250;- Left clamp Ø 250;- Steel case (for transporting and for use as a work bench).

ON REQUEST (ACCESSORIES)

- Clamps adapters Ø 140 and 180 mm (4 pieces/Ø) [Ø supplied singly];

- Lateral supports adapters Ø 140 and 180 mm (2 pieces/Ø) [Ø supplied singly];

- Sets of extractable upper jaws SUPRA Ø 75, 90, 110, 125, 140, 160,180, 200, 225 mm (2 pieces/Ø) [Ø supplied singly];

- Wooden case for SUPRA extractable upper jaws;- Plate cover for TP VR 250;- Gloves (for protection).

VR 250

Machine body

Lateral supports and adapters

Heating plate

Page 13: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

25

75 ÷ 250 mm110 V 230 V

Single phase - 50/60Hz1300 W 1300 W450 W 705 W1750 W 2005 W

180 ÷ 280°C (A)-5 ÷ +40°C~ 20 min.

PE, PP, PB, PVDF

805 x 565 x 705 mm450 x 50 x 440 mm340 x 20 x 410 mm390 x 200 x 430 mm835 x 565 x 760 mm

835 x 1240 x 1530 mm

20,00 Kg5,84 Kg4,93 Kg

123,00 Kg5,50 Kg

TECHNICAL FEATURES

Basic clamps and adapters

Steel case

SUPRA extractable upper jaws

Wooden case for SUPRAextractable upper jaws

Weight (Kg) clamps adapters (4 pieces/Ø)Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 2253,80 3,00 2,90 2,80 2,50 2,20 1,90 1,50 1,50

Total weight: 22,10 Kg

Weight (Kg) SUPRA extractable jaws (2 pieces/Ø)Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 2252,30 2,30 2,40 2,40 2,50 2,50 2,50 2,30 2,60

Total weight: 21,80 Kg

Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 75 Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 2501,20 1,1 1,00 1,10 0,90 0,80 0,70 0,60 0,50 0,40

Total weight: 8,30 Kg

Working rangePower supply

Power absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperatureAmbient temperatureTime to reach welding temperature(A) Materials

DIMENSIONS (W x D x H)Steel caseTP VR 250 TE plateBasic clampsWooden case for SUPRA extractable upper jaws Machine being transported Machine being used

WEIGHTSteel caseTP VR 250 TEBasic clampsMachine with “SUPPLIED WITH”Wooden case for SUPRA extractable upper jaws

Page 14: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

26

MAXI 315

A professional welding machine ideal for medium sized pipes and sewersup to Ø 315 mm. It consists of a machine body with pressure regulatingdevice, a pair of clamps, two lateral supports, an electrically controlled millingcutter for levelling the ends of the pipe and/or fitting with a safety microswitch,an extractable heating plate with automatic electronic device to control thetemperature, a sliding support, a tip-up metal frame on wheels that acts as awork bench and protection when transporting the machine.The MAXI 315 can weld fittings such as bends and tees. Branches can alsobe welded thanks to the single clamps (available on request) indicated forall diameters in the working range.Available in 110 V and 230 V.

SUPPLIED WITH

- Machine body with a milling cutter and lateral supports;- TP 315 TE plate;- Right clamp Ø 315;- Left clamp Ø 315;- Steel frame on wheels (for transporting and for use as a work

bench);- Wooden case containing the clamps and lateral supports adapters

Ø 200 and 250 mm (Ø90 to 280 mm on request), and the service spanners.

ON REQUEST (ACCESSORIES)

- Clamp adapters Ø 90, 110, 125, 140, 160, 180, 225, 280 mm(4 pieces/Ø) [Ø supplied singly];

- Lateral supports adapters Ø 90, 110, 125, 140, 160, 180, 225,280 mm (2 pieces/Ø) [Ø supplied singly];

- Wyes (Y) clamps (for welding branches) Ø 90, 110, 125, 140, 160,180, 200, 225, 250, 280, 315 mm (2 pieces/Ø) [Ø supplied singly];

- Special transport wooden case;- Plate cover for TP 315;- Gloves (for protection).

Maxi 315

Machine body

Lateral supports and adapters

Heating plate

Page 15: BUTT WELDING MACHINES MANUAL WELDERS welders.pdf · MANUAL WELDERS BUTT WELDING MACHINES MANUAL WELDERS These welders are controlled directly by the operator who, by hand or by means

MA

NU

AL

WE

LDE

RS

27

90 ÷ 315 mm110 V 230 V

Single phase - 50/60 Hz3000 W 3000 W800 W 705 W3800 W 3705 W

180 ÷ 280°C (A)-5 ÷ + 40°C~ 20 min.

PE, PP, PB, PVDF

1200 x 680 x 1045 mm580 x 80 x 490 mm413 x 23 x 410 mm510 x 410 x 245 mm

1200 x 680 x 1045 mm1420 x 1300 x 1570 mm1325 x 855 x 1275 mm

30,00 Kg10,56 Kg7,58 Kg7,30 Kg

183,00 Kg75,00 Kg

Working rangePower supply

Power absorbed by the TPPower absorbed by the milling cutterTotal absorbed powerWorking temperatureAmbient temperatureTime to reach welding temperature(A) Materials

DIMENSIONS (W x D x H)Frame on wheelsTP 315 MAXI TE plateBasic clampsWooden case for adapters Machine being transported Machine being used Special transport wooden case

WEIGHTFrame on wheelsTP 315 MAXI TE plateBasic clampsWooden case for adaptersMachine with “SUPPLIED WITH”Special transport wooden case

TECHNICAL FEATURES

Clamps and adapters

Frame on wheels

Case for adapters and service spanners

Wyes (Y) clamps

Weight (Kg) clamps adapters (4 pieces/Ø)Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 250 Ø 2806,30 6,10 5,90 5,50 5,20 4,80 4,70 3,70 3,00 2,00

Total weight: 47,20 Kg

Weight (Kg) lateral support adapters (2 pieces/Ø)Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 250 Ø 2801,10 1,00 1,00 0,90 0,80 0,70 0,60 0,50 0,40 0,30

Total weight: 7,30 Kg

Weight (Kg) wyes (Y) clamps (2 pieces/Ø)Ø 90 Ø 110 Ø 125 Ø 140 Ø 160 Ø 180 Ø 200 Ø 225 Ø 250 Ø 280 Ø 3155,56 6,28 6,74 7,20 7,62 9,06 9,70 9,50 9,54 13,42 14,14

Total weight: 98,76 Kg