bust a move!. what is erosion? erosion is defined as removal of rocks and soil by wind, water, ice...
TRANSCRIPT
Bust a move!
What is Erosion?
Erosion is defined as removal of rocks and soil by wind, water, ice and gravity.
Wind, water, ice and gravity are also known as the agents of erosion.
Weathering vs. Erosion
Weathering involves two processes [physical, chemical]
that often work together to break down rocks. Both processes occur in place. No movement is involved in
weathering.
Wind Erosion
Wind can play a role by carrying material (especially sand and clay) from one place to
another.As the wind blows, it picks up small
particles of sand/sediment and blasts large rocks with the sand/sediment, cutting and
shaping the rock. The intensity of wind erosion is determined
by:Sum (amount of sand)
SpeedSlope
Surface
Wind Erosion
Water ErosionWhen rain falls to the Earth it can evaporate, sink into the ground, or flow over the land as Runoff. When it flows over land, erosion occurs. Runoff picks up pieces of rock and "runs" downhill cutting tiny grooves
(called rills) into the land. How much erosion takes place is determined by the:
Sum (amount of water)SlopeSpeed
Surface
Water Erosion
Ice Erosion
Glaciers wear down the landscape; by picking up and carrying debris that moves across the land along with the ice.
Glaciers can pick up and carry sediment that ranges in size from sand grains to boulders bigger than houses.
Moving like a conveyor belt or a bulldozer, a single glacier can move millions of tons of material!
How much erosion takes place is determined by the: **Sum (Glaciers are massive!)
SlopeSpeed
Surface
Ice Erosion
Gravity Erosion
Gravity Erosion is better known as Mass Movement and is defined as the transfer of rock and soil downslope by direct action of gravity without a flowing medium (such as
water or ice). Some of the best examples of Mass Movement are:
Creep Rock fall Slump Landslides Avalanches
Gravity Erosion
Karst A type of landscape where caves are
common.The land has different sized blocks of
limestone. These fractures are where the water seeps in, dissolves the
stone, and forms caves.
How does this effect us?
Humans are constantly influencing the nature
of our landscapes. HOUSES, ROADS,
BUILDINGS, DEVELOPMENTS, CANALS, etc., all
change the shape and appearance of the land.
Erosion Lab
Preparation
Put notes where you can see them, but out of the way of water and mud.
Procedures:
Person 1 gets a plastic container and brings it to the dirt supply for 1 small shovelful of dirt at one end of the plastic container.
Person 2 gets one pipette for each member of the group and something to tilt slightly the plastic container.
Person 3 gets a cup and fills it up with water.
Set up your container so it flows evenly down to the low side of the container. (Slanting in more than one direction can cause water to accumulate in corners and cause unnatural features.)
Add 100-150 mL of water to the lower end of the container to make a small lake.
Everyone gets one pipette which can be used to drop (not squirt) on to the “mountain”. You have 20 minutes to do this. Make note of erosional features because some features, such as sinkholes, slump, and landslides are very difficult to identify after they happen. Feel free to experiment with height of the drop.
After 20 minutes, have students answer the following questions:
Cleanup:
Person 1: Puts dirt in disposal as directed and rinses/wipes the container.
Person 2: Returns pipettes and wipes up any mess around lab area on floor
Person 3: Returns beaker and dries up any water around lab area on desk
Weathering and Erosion Lab
Procedures; Step 1 Make a pile of sand in the middle of the pan. Place pebbles on the surface of the new hill, and hypothesize what will
happen. Now lightly blow across the sand and pebbles with the straws. Make a “sand mountain” by piling sand up on one side of your pan. Hold the ruler in the mountain so that the sand covers up to the 10
centimeter mark. Make a “rain cup” by taking one of your small cups and poking holes into
the bottom of the cup with your pen or pencil. Hold your “rain cup” over your mountain and fill the other cup with water. Pour the water from the second cup into your “rain cup” – the water will
now “rain” on your mountain. After the rain has stopped, measure the height of the remaining sand and
record that number below. Explain where some of the sand went to and why.
Weathering and Erosion Lab cont.Step 2;
Make a second mountain exactly like the first.
Using the popsicle sticks, build a dam on one side of the mountain.
Hypothesize what will happen when this new mountain is “rained” on.
Now “rain” on your new mountain and record the height below. Was your hypothesis correct? Explain your results below.
Weathering and Erosion Lab cont. Step 3;
Make a chemical weathering chamber by adding a piece of chalk to the last small cup and filling it ½ full with vinegar.
Put the lid on your chemical weathering chamber and shake it vigorously for ten minutes – You might want to take turns with this one.
Hypothesize what will happen to the chalk.
Sources
www.augusta.k12.va.us/.../lib/.../Weathering_and_Erosion.ppt
www.powayusd.com/.../Erosion/The%20Forces%20of%20Weathering%20and%20Erosion.ppt
mail.clevelandcountyschools.org/.../Weathering_and_Erosion.ppt
Bryce Shelly; Lehi Junior High School