business units - gbsupport.com · uwe braun gmbh locations our headquarters is located in lenzen...

Business Units

Lighting systems→ an independent business unit for outdoor lighting

Vehicle modules→ AntiGlareLight - ABL (in German: AntiBlendLicht) Optical safety system for retrofit in every car, transporter and truck

Process engineering→ an independent business unit for the market of optical systems for digital quality assessment of products withrespect to their surface quality

Uwe Braun GmbH Locations

Our headquarters is located in Lenzen (Elbe)on the axis Hamburg - Berlin.

You can find us likewise in Mecklenburg-West Pomerania, Saxony, Thuringia and Brandenburg, Baden-Württemberg, Bavaria, North Rhine-Westphalia, France, Czech Republic, Spain, China, Brazil, Mexico, South Korea and USA.

uwe braun GmbH

Quality-Management-System DIN EN ISO 9001

Certification by TÜV-CERT

Europe-wide certification by ENEC

ETL-Certification (for Canada & US-market)

uwe braun GmbH

References

Competitive Advantages

Uwe Braun’s Unique Competitive Advantages Include:

Substantial energy and testing efficiencies due to “dimmable” and “digital” surface-control optics containing integrated & patented lens-prism-optics with intelligent control systems

Highest level of color-matching effectiveness via “off-color” lighting

Lower thermal load due to optimized housings

Ergonomic working conditions thanks to lower glare

Dramatically reduced electrical consumption and low maintenance costs

In our laboratories, we develop modern, innovative illuminating systems for your products!

We are your partner in the matter of visual surface control and automatic quality assurance.

Innovative illuminating engineering

LPO

SLOLPS100

OCO

Visual defect detection

LPS 50Design, Press shop, Rawshop, Primer

LPS 100Paintshop; Finish

LPS 100/18Paintshop; Finish

WLO 40Paintshop; Audit;Rawshop; Finish

Principle Successive contrast optic

Successive contrast optic

Successive contrast optic

Alternation-Line-Optic,raised contrast

Fields of application

for the inspection of surfaces with medium to weak reflection characteristics

for the inspection of surfaces with medium to good reflection characteristics


for the inspection of surfaces with weak to medium reflection characteristics

Assembly 4 x 36 W,4 x 54 W,4 x 58 W,4 x 80 W,

3 x 36 W, 3 x 58 W

3 x 18 W 4 x 36 W, 4 x 54 W,4 x 58 W, 4 x 80 W

Products – OKO (Surface control optics)

LLOPaintshop; Audit

AROSpot repair

CCOColorMatching; Color audit; Design; Finish

OCOPaintshop

Principle Reflection of scattered light

Asymmetrical reflector system

Variable change of color temperature from 2700 to 6500 Kelvin

Bright-field Optic


for the inspection of surfaces with good to very good reflection characteristics (The optic makes high-polish surfaces appear matt)

for the inspection of surfaces with good reflection characteristics; applicable in paint booths

for the inspection of surfaces with good reflection characteristics; specially suitable for color matching of painted surfaces

for the inspection of surfaces with good reflection characteristics

Assembly 2 x 36 W,2 x 58 W

3 x 36 W, 3 x 54 W, 3 x 58 W,3 x 80 W

8 x 36 W,8 x 58 W

4 x 36 W, 4 x 58 W


MRO Paintshop; Audit

PVOUnderbody protection

VAO Press plant; Rawbody;Paintshop; Audit

VAO 2Paintshop; Audit

Principle Successive contrast optic with color temperature control from 2700 to 6500 Kelvin

Optic for successive and simultaneous contrasts

Prism contrast optic Prism contrast optic


for the inspection of surfaces with good reflection characteristics; Error detection coupled with color evaluation

for the detection of PVC-pollutions on surfaces


for the inspection of surfaces with weak to medium reflection characteristics


3 x 36 W, 3 x 58 W

1 x 36 W, 1 x 54 W,1 x 58 W, 1 x 80 W

2 x 36 W, 2 x 54 W,2 x 58 W, 2 x 80 W


SLOPaintshop

LPOPaintshop; Audit;Spot Repair; Finish

UVOPaintshop

FLOPress plant

HSPaintshop

Principle Multi-selective sunlight projection

Multi-selective sunlight projection

Fluorescence Optic

Parabolic optics with spherical head mirror, optionally with screen printing elements

Simple sunlight projection


for the detection of polishing errors and holograms

for the detection of polishing errors and holograms

for the inspection of surfaces with good reflection characteristics; especially suitable for effect paint, textiles and plastic with white flaws

for the inspection of surfaces with weak reflection characteristics

for the inspection of surfaces with good reflection characteristics


5 x 35 W,6 x 35 W

1 x 36 W,1 x 58 W,1 x 80 W

1 x 54 W,1 x 80 W

1 x 75 W


Lifetime: ca. 12.000 hours of operation

→ In order to keeping the quality to a constant high level, the illuminant should be replaced every 2 years at the latest.

LPS 100

2 x Osram Lumilux L58/865 (color temperature 6500 K) 1 x Osram Lumilux L58/840 (color temperature 4000 K)

Illuminants in the OKO‘s (Surface Control Optics)

CCO

4 x Osram Lumilux L58/827 (color temperature 2700 K) 4 x Philips Master TL-D 90 Graphica 58W/965 (color temperature 6500 K)

Illuminants in the OKO‘s (Surface Control Optics)

AST 3.11(Automatic controller)

HAST 2.0(Semiautomatic controller)

Manual Control Unit(Manual Control 1.2)

• is used to support the automatic adaption of the illumination level of a lighting system

• different illumination levels will be determined in order to adapt the light to the lightness of the object of interest

• various luminance-sensors are in use

In greater systems which do support moved objects, individual settings of single OKO’s or groups of refulgence will support the necessary illumination with respect to the position of the object under test.

• manual control of light scenarios in lighting systems

• light scenarios can be programmed • can be used anywhere that variable

lighting intensities are required

• is used to manually control all OKO’s in a lighting system

• It does support any application being in need of flexible (variable) illumination levels

Products - Controller

Lighttunnel, VW Dresden

Audit Finishline, VW Bratislava

Audit, Bugatti Molsheim

exact detection of surface defects on basis of the analysis of reflection imagesErgonomic working with less glare Energy efficiency by intelligent control systems

Lighttunnel, Audi Neckarslum

Surface control system

Light-Density-AttachmentOKO

Automatic controller(AST 3.11)

Direction of Transport

V= 0...10 V

(500-3500 lux)Reference light

Sensor for luminance

Principle of the light-tunnel

Floor


Defect detection:

Dents and pits

LPS 50/80

Project BMW Dingolfing

Project SCANIA – Audit rawbody cabin

Hyundai, Ostrava (Czech Republic)

Inspection zone (Primer)

LPS50/58

80 OKO + semiautomatic controller

Inspection zone

LPS100/58

35m

KIA, Zilina (Slovakia)

Raw body line

LPS50/80

Inspection Zone

LPS100/58

Scope of delivery:OKO‘s (Surface control optics)Automatic / semiautomatic controllerWiring

• following the visual principle of off-color reinforcement for optimal color-matching• reproduction of standard illuminant D65, F11 (TL84)• real 24-hour-reproduction of natural day light (2700 to 6500 K)

CCO

ColorMatchingSystem

ColorMatchingSystem

CIE-Modell

Color Matching System

• 57 x CCO‘s (ColorControlOptics)• burned in and spectrally measured

illuminant• 1 x semiautomatic color controller• steel construction

ColorMatchingSystem

Characteristic

• D65, F11 (TL84), 2700 K (HAFST 2.0)• illuminant: between 8.000 - 18.000 Lux• special reflectors• all CCO‘s are dimmable → energy-efficient• choice between :

semiautomatic color controller - HAST 2.0Automatic color controller – AST 3.11 (The color of the vehicle is detected. The most effective off-color is then determined and set automatically to optimize color match processing.)

Vehicle

ColorMatchingSystem

ColorMatchingSystem

Additional Options

LensPrismOpticMultiscreen

Color Detector

ColorMatchingSystem

References

ColorMatchingSystem

• Mercedes Benz, Ludwigsfelde• AUDI, Neckarsulm• VW Chattanoga• VW, Brüssel• VW, Changchun• VW, de Mexico• VW, India• VW, Shanghai• VW, Dresden• VW, Wolfsburg• K.face, Heiligengrabe• Merck KgaA, Germsheim

Your partner in planning and consultation

Assessment of vertical surfaces


Assessment of horizontal surfaces


Assessment of horizontal and vertikal surfaces


In-house structural steel work


Service Realisation

Planning

Your added value!!!

All the competence from a single source…


Results

Energy efficiency due to dimmable surface control optics andintelligent control systems

Lower thermal load due to optimized housings

Ergonomic working conditions thanks to lower glare

Low maintenance costs

MADE IN GERMANY

Management BoardMartin Dolling

Manufacturing Plant Lenzen ( Sales, Engineering, R&D, ProductionIndustriegebiet Lange Felder • D-19309 Lenzen (Elbe) Phone: +49-38792-985-0 • Fax: +49-38792-985-33

Main Office Potsdam (Management Board)Am Neuen Markt 9c • D-14467 PotsdamPhone: +49-331-201489-10 • Fax: +49-331-201489-29

E-Mail: [email protected] • Internet: www.uwe-braun.de

Contact

North American Agent:

20820 W. Western DriveBuckeye, AZ 85396

[email protected]

Peter Beierling

+1-623-398-6295 P+1-248-225-3396 C+1-623-258-4350 F

business units - gbsupport.com · uwe braun gmbh locations our headquarters is located in lenzen...

Documents