4.18 hrs

1 pcs

f

0.15 mm

k

0.40 mm

h

1

27.00 g

d

MK3/S

Print Files (.gcode) DOWNLOAD ALL FILES

Summary

Based on an OpenSCAD design by Sasha Romanosky. Modified STL inTinkercad to make openings at top and bottom to make it easier to get toyour cards.

As a wallet it's good for 7 or so cards and or folder banknotes. It's alsostrong: if you sit on it, it (probably) won't break.

https://www.tinkercad.com/things/lajRDkZedXH

Gadgets > Other Gadgets

wallet sleeve businesscardholder

M Mark

business cardholder / wallet

VIEW IN BROWSER

updated 22. 3. 2020 | published 22. 3. 2020

4.4 MB

4.18 hrs f 0.15 mm k 0.40 mm h PLA 26.90 g d MK3/S

updated 22. 3. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

966 bytesupdated 22. 3. 2020

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

card-holder-custom-mod_015mm_pla_mk3s_4h11m.gcode

businesscard.scad