bushing pumps

27
Manufactured in South Africa 2010 BUSHING PUMP RANGE Technical & Dimensional Catalogue

Upload: ramakantinamdar

Post on 01-Nov-2014

71 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Bushing Pumps

Manufactured in South Africa

2010

BUSHING PUMP RANGETechnical & Dimensional Catalogue

Page 2: Bushing Pumps

Company Profile ...........................................................................1.1 - 1.2

Specification sheet ............................................................................ 2.1

Features ............................................................................................. 2.2

PL Factor ........................................................................................... 2.3

Warranty policy .................................................................................. 2.4

Exploded view .................................................................................... 3

Parts dimensions / quick reference .......................................... 3.1 - 3.10

Complete unit dimensions .......................................................... 4.1 - 4.4

Porting ................................................................................................ 5.1

Torque Settings ................................................................................. 5.2

Contacts ............................................................................................. 6.1

CONTENTS

Page 3: Bushing Pumps

Company Profi le

Group Synergy

We believe that a group of companies only makes any sense when the Group as a whole

amounts to more that the sum of its individual components or entities. We are involved

in hydraulic pumps and motors only, we have a focused foundry operation, a unique

manufacturing facility, a world-class remanufacturing facility and distribution centres

with reputations for excellence in customer service.

Gear Pump Manufacturing (Pty) Ltd. isa wholly owned subsidiary of Dosco GPMHoldings Group. The Dosco GPM Groupspecialises in the manufacture and repairof hydraulic pumps and motors. GPM islocated in Cape Town, South Africa andhas been involved in the manufactureand assembly of SAE mounted cast ironpumps and components since 1985.

Approximately 70% of our production isexported to countries in North and SouthAmerica, Europe, the Middle East, SouthEast Asia, Africa and Australasia.

As a consequence of our reinvestmentphilosophy and policy, we have beensuccessful in doubling our sales andproduction capacity during the last threeyears.

GEAR PUMP MANUFACTURING Technology Investments

Our plant modernisation programme isongoing. Within the last year we increasedour CNC milling capacity by a third anddoubled both our CNC turning and thrustplate CNC milling capacities through thepurchase of additional machinery.

Our inventory philosophy remainsunchanged and we continue to maintainsubstantial investments in inventory bothat our Cape Town plant as well as at variousdistribution centres worldwide.

Inventory

1.1

1989Dosco Precision Hydraulics CC (GPH)

was established as a dedicated hydraulicpump and motor remanufacturing facility.Specialising in conventional and tracklessmining open and closed loop pumps andmotors. It is the largest facility of its kindin the Southern Hemisphere and is locatedin Johannesburg. It is fully ISO 9001-2000

accredited.

1994

DOSCO

PRECISIONHYDRAULICS

1999

2000

GEAR PUMPMANUFACTURING

GEAR PUMPDISTRIBUTORS

(UNITED KINGDOM)

PROPERTIES

HOLDINGS

Dosco GPM Holdings (Pty) Limited acquireda 100% interest of Debex Cape (Pty) Limited(established 1988) which is renamed (GPM)Gear Pump Manufacturing (Pty) Limited. GPMmanufactures a comprehensive range of bothbearing and bushing cast iron gear pumps /

motors and flow dividers.

The holding company is continuouslysearching for ways to improve ourservice levels and effectivenessthroughout the world. (GPD UK)Gear Pump Distributors (UK) Ltd,located in Bromsgrove, Midlands,was created to distribute the GPM

product throughout the UnitedKingdom, Europe and the Middle

East. This dedicated pump workshopis able to assemble, test anddespatch units the same day.

Continual growth and expansionencouraged the Group to acquire

property in Johannesburg and CapeTown to accommodate the foundry,

manufacturing plant and theremanufacturing facility. Currently we

manage three separate propertiescomprising 9000 m2 under roof

1998All companies previously held byshareholders individually were

restructured into a Group underthe holding company (DGH) DoscoGPM Holdings (Pty) Limited. Thisensures a well oiled management

structure within the Group andcontrols all inter company ativities.

Page 4: Bushing Pumps

Company Profi le

ENGINEERINGTECHNOLOGY

SERVICES(Pty) Ltd MANUFACTURING

TECHNOLOGY SERVICES

2002

2003

2004

2008

2010

GEAR PUMPDISTRIBUTORS(AUSTRALIA)

GEAR PUMPDISTRIBUTORS

(AFRICA)

P H I

PRECISIONHYDRAULICS INT.

The Group invested in their own foundryin answer to foundry delays and declining

quality grey iron castings. (ETS)Engineering Technology Services (Pty)

Limited commenced production ofcastings, firstly in Grey Iron, later to be

followed by SG Iron, Bronze andCompacted Graphite Iron.

This facility (GPD AUS) Gear Pump DistributorsAustralia Pty Limited, located in Sydney, distributes

products manufactured by GPM into the AsiaPacific region. GPD AUS supplies new and

repaired pumps / motors and flow dividers, andships parts daily to numerous OEM and hydraulicrepair facilities. These units are tested on a pump

test stand designed and built by Dosco.

(MTS) Manufacturing Technology Services (Pty)Ltd. was set up to manufacture specialised

housings, shafts and couplings primarily for DPH.As such, MTS is a specialist machine shop and isequipped with all the necessary machine tools toperform this function. This concept proved very

successful and MTS now performs work previouslydone by subcontractors and to a higher quality

standard and quicker turnaround time.

Precision hydraulics Internationalwas established to oversee the

Groups internationaloperations.The market determinesthe level of expertise required andwe have always prided ourselveson our customer service, quality

and extensive product range.

Further growth into West andEast Africa was neccessaryas our product is now found

on numerous OriginalEquipment Manufacturersequipment and in meeting

customer demands to servicemining and civil constructionoperations throughout Africa.

Foundry

The Group’s in-house foundry,Engineering Technology Services (Pty)Limited, is also located in Cape Town.Expansion has mirrored that of GPM.Physically, the facility has been expandedby more than 50% in order to cater forincreased volumes. Currently the foundryproduces Grey Iron, SG Iron andCompacted Graphite Iron. In the interestsof the environment and to further containcosts, we invested in a swarf pelletisingmachine. Consequently, a large portionof the foundry raw material is obtainedby pelletising iron and steel swarf and offcuts from the GPM facility. Bronzecastings for the machining of thrust platesare produced in a similar fashion.Reclaimed machining coolants and cuttingoils are recycled.

Porting & Pump Assemblies

We have porting capabilities to suit theneeds of all our customers. Our volumesof pump assemblies have more thanquadrupled during the last two years. Thisnecessitated the construction of a newand substantially larger pump assemblyarea as well as new and upgraded teststands. All assemblies are tested oncomputerised test stands which havemultiple flow, pressure, temperature andspeed testing capability.

We have been accredited in accordancewith the ISO 9001-2008 standard since1992. Our quality management systemmakes use of statistical analyses todetermine manufacturing processcapability. The stability of manufacturingprocesses is continuously monitored andmanaged via machine run charts.In line with our technology investmentphilosophy, we have recently invested ina 3 dimensional co-ordinate measurementmachine. This will increase productivityby means of faster first-off measurementas well as enabling expanded statisticalsampling checks.

Quality Assurance

1.2

Page 5: Bushing Pumps

BUSHING RANGE

Pump & MotorSpecifications

2.1

To Convert Inches Bar Cu In/rev US GPM US GPM kg Useful Formulae Into Millimeters Psi cc/rev Cu In/rev cc/rev lbs

Multiply by 25.4 14.5 16.39 2.31 3.785 2.205

THE ABOVE DATA ARE AVERAGE RESULTS BASED ON A SERIES OF TESTS AND ARE NOT NECESSARILY REPRESENTATIVE OFANY SINGLE UNIT. GEAR PUMP MANUFACTURING RESERVES THE RIGHT TO AMEND THE TECHNICAL DATA WITHOUT NOTICE. GP = PUMP

GM = MOTORGF = FLOW DIVIDERGA = ADD ONGB = STEP DOWNGZ = PUMP / MOTOR COMBO

250

Gear Housing Width 1.00"(1") 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3")cc/rev 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40Lpm (at 1000rpm) 20.80 31.20 41.70 52.10 62.60 73.00 83.50 94.00 104.40cu in (cu in/rev) 1.28 1.91 2.55 3.19 3.82 4.46 5.10 5.74 6.38US gpm (at 1000rpm) 5.50 8.24 11.02 13.76 16.54 19.29 22.06 24.84 27.58Max Pressure( bar ) 240 240 240 240 240 220 200 190 170Max Pressure( psi ) 3500 3500 3500 3500 3500 3250 3000 2750 2500Max Speed (rpm) 2400 2400 2400 2400 2400 2400 2400 2400 2400Pump Weight (kg) 22.70 22.70 22.70 23.40 24.10 24.80 25.50 26.20 26.90Additional sect add (kg) 22.70 22.70 22.70 23.40 24.10 24.80 25.50 26.20 26.90

265

Gear Housing Width 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2") 2.75"(23/4") 3.00"(3")cc/rev 44.00 59.00 73.50 88.00 102.00 118.00 132.60 147.00Lpm (at 1000rpm) 44.00 59.00 73.50 88.00 102.00 118.00 132.60 147.00cu in (cu in/rev) 2.68 3.60 4.49 5.37 6.22 7.20 8.09 8.97US gpm (at 1000rpm) 11.62 15.59 19.42 23.25 26.95 31.18 35.03 38.84Max Pressure( bar ) 240 240 240 240 240 240 220 200Max Pressure( psi ) 3500 3500 3500 3500 3500 3500 3250 3000Max Speed (rpm) 2400 2400 2400 2400 2400 2400 2400 2400Pump Weight (kg) 24.90 24.90 26.00 27.10 28.20 29.30 30.40 31.50Additional sect add (kg) 22.70 22.70 23.40 24.10 24.80 25.50 26.20 26.90

230

Gear Housing Width 1.00"(1") 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2")cc/rev 16.00 24.10 32.20 40.30 48.30 56.40 64.50Lpm (at 1000rpm) 16.00 24.10 32.20 40.30 48.30 56.40 64.50cu in (cu in/rev) 0.99 1.48 1.97 2.46 2.96 3.45 3.94US gpm (at 1000rpm) 4.23 6.37 8.51 10.65 12.76 14.90 17.04Max Pressure( bar ) 240 240 240 240 240 220 200Max Pressure( psi ) 3500 3500 3500 3500 3500 3250 3000Max Speed (rpm) 3000 3000 3000 3000 3000 3000 3000Pump Weight (kg) 16.00 16.00 16.00 16.60 17.20 17.80 18.40Additional sect add (kg) 14.40 14.40 14.40 14.90 15.50 16.00 16.60

CODE Manufactured in South Africa

DASH SIZE -05 -07 -10 -12 -15 -17 -20 -22 -25GEAR WIDTH 0.50"(1/2") 0.75"(3/4") 1.00"(1") 1.25"(11/4") 1.50"(11/2") 1.75"(13/4") 2.00"(2") 2.25"(21/4") 2.50"(21/2")

215

Gear Housing Width 0.88"(7/8") 1.13"(11/8") 1.38"(13/8") 1.63"(15/8") 1.88"(17/8") 2.13"(21/8") 2.38"(23/8")cc/rev 10.00 15.00 20.00 25.00 30.00 35.00 40.00Lpm (at 1000rpm) 10.00 15.00 20.00 25.00 30.00 35.00 40.00cu in (cu in/rev) 0.61 0.92 1.22 1.53 1.84 2.15 2.44US gpm (at 1000rpm) 4.23 6.37 8.51 10.65 12.76 14.90 17.04Max Pressure( bar ) 240 240 240 240 220 200 170Max Pressure( psi ) 3500 3500 3500 3500 3200 2900 2500Max Speed (rpm) 3000 3000 3000 3000 3000 3000 3000Pump Weight (kg) 8.00 8.00 8.00 8.50 9.00 9.50 10.00Additional sect add (kg) 8.00 8.00 8.00 8.50 9.00 9.50 10.00

Page 6: Bushing Pumps

BUSHING FEATURES

2.2

Pumps & Motors

FLUID POWER FOR MOBILE EQUIPMENT

GPM hydraulic pumps and motors are particularly well suited to mobile equipment applications; they are designed for extreme dutycycles, and continuous heavy duty operation. Whilst the equipment is of a simple yet rugged design, it is manufactured to extremelyprecise tolerances.

Pumps are available in capacities ranging from 11 cc/rev to 200 cc/rev for each gear section. Several sections can be combined intoone assembly. A wide selection of SAE and ANSI mounting flanges and drive shafts are available for all drive units. Pipe thread, O-ringseal, and split flange ports are available in both metric and SAE standards.

GPM pumps are manufactured under statistical analysis process control which is monitored by the South African Bureau of Standardsto an ISO 9001-2008 quality management system.

MAJOR FEATURES

Sectional Construction: Standard Parts can be assembled in a wide variety of configurations to suit almost any application. All gearhousings are cast from an extra complex iron with a minimum tnsile strength of 380 Mpa (55000 Psi) and hardness between 200 and250 Brinell.

Multiple pump units: Several pump sections can be combined in a single drive, to eliminate multiple drive P.T.O units.

Precision matched gears: All gears are manufactured from high alloy forged bars, surfaces are super finished and each gear pair ismatched for maximum efficiency. The deep 10-tooth pattern gives maximum output per revolution whilst ensuring low pulsation frequency.

Bearings: Latest technology Teflon plain bush bearing are utilized on all gear journals to improve pressure and speed capability.

Motors: are available with capacities ranging from 83 NM to 517 NM @ 1000RPM. Basically similar in design to pumps, they areengineered for extreme heavy duty applications, with high efficiency characteristics. Motor speed is in direct proportion to the volumeof oil delivered to the inlet port and output torque is in proportion to the pressure supplied to the motor. All other equipment required tomatch our pumps and motors is readily available.

INTERCHANGEABLILITY

GPM hydraulic equipment is directly interchangeable with the other internationally recognized SAE pumps and motors.

GPM equipment is sold in component form but units can be assembled and tested to meet your particular requirements.

Page 7: Bushing Pumps

BUSHING FEATURES

2.3

PL FACTOR

Each section of a pump or motor should be regarded as a single unit with corresponding power input requirements. The entire inputhorsepower is fed through the drive shaft, the power delivered to or from the unit is limited by the strength of the shaft. The limit is definedas the “PL” factor. “P” being the operating pressure in PSI and the “L” the sum of the gear widths in inches.

In multiple units the “PL” must be calculated for each connecting shaft and must include the sum of the gear widths driven by it.

(Each shaft has a unique “PL” factor as can be seen in the table below)Pressure (PSI) x Total Gear Width (Inches) = PL Factor

PL FACTOR MUST NOT EXCEED FIGURE SHOWN IN CHART FOR SHAFT TYPE

SHAFT TYPE SOLID SHAFT LOOSE SHAFT & GEAR (CONTINENTAL SHAFT)

215 SAE “A” Spline 4 450 -SAE “A” Key 3 600 -SAE “B” Spline 13 400 -SAE “B” Key 9 900 -Conneccting Shaft - 5 550

230 SAE “B” Spline 8 450 6 250SAE “B” Key 6 250 6 250SAE “B-B” Spline 13 000 6 250SAE “B-B” Key 9 300 6 250SAE “C” Spline - 6 250SAE “C” Key - 6 250Connecting Shaft - 6 250

250 SAE “B” Spline 6 450 6 450SAE “B” Key 4 750 4 750SAE “B-B” Spline 9 900 9 900SAE “B-B” Key 7 100 7 100SAE “C” Spline 19 100 9 000SAE “C” Key 13 900 9 000Connecting Shaft - 9 000

265 SAE “B” Spline 5 050 5 050SAE “C” Spline 14 900 11 950SAE “C” Key 10 800 10 800Connecting Shaft - 11 900

Page 8: Bushing Pumps

WARRANTY POLICY

2.4

Gear Pump Manufacturing (GPM), warrants all of its products to be free from defect in material and workmanship, for a period of

eighteen (18) months from date of delivery or twelve (12) months from date of installation, whichever event occurs first.

This warranty is expressly in lieu of any other warranties expressed or implied including any warranty of fitness for a particular

purpose. The purchaser’s sole and exclusive remedy shall be limited to the repair, replacement or exchange of the warranted

products at our option, FOB GPM factory.

No special, incidental, consequential or other damages shall be recoverable. GPM shall not be liable for consequential damages

or contingent liabilities including but not limited to loss of life, personal injury, loss of crops, loss due to fire or water damage, loss

of business income, down time cost and trade or other commercial loss arising out of the failure of the product. GPM will in no

event be liable for any sum in excess of the price received by it for the product for which liability is claimed or asserted.

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

Page 9: Bushing Pumps

BUSHING RANGE

A

B

C

D

E

F

G

I

L2

N

Q

S

W

N

N

N N

N

N

N

C

L2

L2

L2

L1

H1

H1

H1

H1

H2

H2

H2

H2

H3 H4

H5MOTORTHRUSTPLATESEALS

G

G

G

K1

K2

K2K2

K2

V1

V2

V3

REFER TO QUICKREFERENCECHARTFOR VARIOUSOPTIONSAVAILABLE.

J

3

Page 10: Bushing Pumps

BUSHING RANGE - Quick Reference

**PLEASE CONTACT GPM FOR SPECIALS

SUBSTITE ?? WITH CORRECT GEAR SIZE CODE

A

3.1

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

SOLID SHAFT GEAR SET

 7/8" KEY SAE B ADC-230-??

7/8" KEY SHORT SAE B 

1" KEY SAE BB AEC-230-??

1 1/4" KEY SAE C

9 SPLINE 5/8" SHORT SAE A

13 SPLINE 7/8" SAE B ABC-230-??

13 SPLINE 7/8" SHORT SAE B ABC-230-4-??

14 SPLINE 1 1/4" SAE C

15 SPLINE 1" SAE BB AAC-230-??

230

SOLID SHAFT GEAR SET

 7/8" KEY SAE B

7/8" KEY SHORT SAE B  ADK-215-??

1" KEY SAE BB

1 1/4" KEY SAE C

9 SPLINE 5/8" SHORT SAE A AZK-215-??

13 SPLINE 7/8" SAE B

13 SPLINE 7/8" SHORT SAE B ABK-215-??

14 SPLINE 1 1/4" SAE C

15 SPLINE 1" SAE BB

215

Dimensions are for reference purposes only

SOLID SHAFT GEAR SET

 7/8" KEY SAE B

7/8" KEY SHORT SAE B 

1" KEY SAE BB ATF-250-??

1 1/4" KEY SAE C ASF-250-??

9 SPLINE 5/8" SHORT SAE A

13 SPLINE 7/8" SAE B AVF-250-??

13 SPLINE 7/8" SHORT SAE B

14 SPLINE 1 1/4" SAE C APF-250-??

15 SPLINE 1" SAE BB AAF-250-??

250

SOLID SHAFT GEAR SET

Page 11: Bushing Pumps

BUSHING RANGE - Quick Reference

**PLEASE CONTACT GPM FOR SPECIALS

SUBSTITE ?? WITH CORRECT GEAR SIZE CODE

3.2

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

SOLID SHAFT GEAR SET

 7/8" KEY SAE B

7/8" KEY SHORT SAE B 

1" KEY SAE BB

1 1/4" KEY SAE C AAG-265-??

9 SPLINE 5/8" SHORT SAE A

13 SPLINE 7/8" SAE B ABG-265-??

13 SPLINE 7/8" SHORT SAE B

14 SPLINE 1 1/4" SAE C ANG-265-??

15 SPLINE 1" SAE BB

265

Dimensions are for reference purposes onlyA SOLID SHAFT GEAR SET

Page 12: Bushing Pumps

BUSHING RANGE - Quick Reference

3.3

LOOSE GEAR SETS

STANDARD BVK-215-??

215

LOOSE GEAR SETS

STANDARD BVC-230-??

230

LOOSE GEAR SETS

STANDARD BMF-250-??

250

LOOSE GEAR SETS

STANDARD BPG-265-??

265

“ALSO MAKE SERIES 115 = BBA-115-??

ALSO MAKE SERIES 137= BJA-137-??

SUBSTITUTE ?? WITH CORRECT GEAR SIZE CODE

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

Dimensions are for reference purposes onlyLOOSE GEAR SETSB

Page 13: Bushing Pumps

BUSHING RANGE - Quick Reference

C

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

3.4

SUBSTITE ?? WITH CORRECT GEAR SIZE CODE

215

GEAR HOUSING

PUMP CRK-215-??

MOTOR CLK-215-??

PUMP - BI ROTATION

230

GEAR HOUSING

PUMP CRC-230-??

MOTOR CSC-230-??

PUMP - BI ROTATION

250

GEAR HOUSING

PUMP CMH-250-??

MOTOR CLF-250-??

PUMP - BI ROTATION

Dimensions are for reference purposes only

265

GEAR HOUSING

PUMP CSG-265-??

MOTOR CLG-265-??

PUMP - BI ROTATION

GEAR HOUSING

Page 14: Bushing Pumps

BUSHING RANGE - Quick Reference

D

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

215

SHAFT END COVERS

2 BOLT 3.25" SAE A DWK-215

2 BOLT 3.25" SAE A WITH S/RETAINER DWK-215-SPL

2 BOLT 3.25" SAE A MOTOR DWK-215-M

2 BOLT 4" SAE B DGK-215

2 BOLT 4" SAE B MOTOR DGK-215-M

2 BOLT 4" SAE B SHORT

2 BOLT 5" SAE C

2 BOLT 5" SAE C MOTOR

4 BOLT 4" SAE B DEK-215

4 BOLT 4" SAE B MOTOR

4 BOLT 5" SAE C

4 BOLT 5" SAE C MOTOR

4 BOLT DIN PTO

2/4 BOLT 4" SAE B

2/4 BOLT 5" SAE C

PAD MOUNT MOTOR DFK-215-M

3.5

Dimensions are for reference purposes only

230

SHAFT END COVERS

2 BOLT 3.25" SAE A

2 BOLT 3.25" SAE A WITH S/RETAINER

2 BOLT 3.25" SAE A MOTOR

2 BOLT 4" SAE B DGC-230

2 BOLT 4" SAE B MOTOR

2 BOLT 4" SAE B SHORT DGC-230-SH

2 BOLT 5" SAE C DNC-230

2 BOLT 5" SAE C MOTOR

4 BOLT 4" SAE B DEC-230

4 BOLT 4" SAE B MOTOR

4 BOLT 5" SAE C DPC-230

4 BOLT 5" SAE C MOTOR

4 BOLT DIN PTO

2/4 BOLT 4" SAE B

2/4 BOLT 5" SAE C

PAD MOUNT MOTOR

SHAFT END COVERS

Page 15: Bushing Pumps

BUSHING RANGE - Quick Reference

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

250

SHAFT END COVERS

2 BOLT 3.25" SAE A

2 BOLT 3.25" SAE A WITH S/RETAINER

2 BOLT 3.25" SAE A MOTOR

2 BOLT 4" SAE B DRF-250

2 BOLT 4" SAE B MOTOR

2 BOLT 4" SAE B SHORT

2 BOLT 5" SAE C DNF-250

2 BOLT 5" SAE C MOTOR

4 BOLT 4" SAE B DHF-250

4 BOLT 4" SAE B MOTOR

4 BOLT 5" SAE C DKF-250

4 BOLT 5" SAE C MOTOR

4 BOLT DIN PTO DZF-250

2/4 BOLT 4" SAE B DDB-250-4

2/4 BOLT 5" SAE C DDB-250-5

PAD MOUNT MOTOR

265

SHAFT END COVERS

2 BOLT 3.25" SAE A

2 BOLT 3.25" SAE A WITH S/RETAINER

2 BOLT 3.25" SAE A MOTOR

2 BOLT 4" SAE B DRG-265

2 BOLT 4" SAE B MOTOR DRG-256-M

2 BOLT 4" SAE B SHORT

2 BOLT 5" SAE C DVG-265

2 BOLT 5" SAE C MOTOR DVG-265-M

4 BOLT 4" SAE B DSG-265

4 BOLT 4" SAE B MOTOR DSG-265-M

4 BOLT 5" SAE C DTG-265

4 BOLT 5" SAE C MOTOR DTG-265-M

4 BOLT DIN PTO

2/4 BOLT 4" SAE B

2/4 BOLT 5" SAE C

PAD MOUNT MOTOR

3.6

Dimensions are for reference purposes onlyD SHAFT END COVERS

Page 16: Bushing Pumps

BUSHING RANGE - Quick Reference

3.7

E

230

PORT END COVERS

PORTED EUC-230

PORTED 4 PORT  EUC-230-4

TANDEM EXC-230

MOTOR EUC-230-M

MOTOR TANDEM

FAN MOTOR

STEP DOWN CW EPB-230/215 CW

STEP DOWN CCW EPB-230/215 CCW

ADD ON 2 BOLT A CW

ADD ON 2 BOLT A CCW

ADD ON 2 BOLT B CW

ADD ON 2 BOLT B CCW

215

PORT END COVERS

PORTED EUK-215

PORTED 4 PORT  EUK-215-4

TANDEM EXK-215

MOTOR EUK-215-M

MOTOR TANDEM

FAN MOTOR EPK-215-M

STEP DOWN CW

STEP DOWN CCW

ADD ON 2 BOLT A CW

ADD ON 2 BOLT A CCW

ADD ON 2 BOLT B CW

ADD ON 2 BOLT B CCW

Dimensions are for reference purposes onlyPORT END COVERS

Page 17: Bushing Pumps

BUSHING RANGE - Quick Reference

3.8

E250

PORT END COVERS

PORTED EWF-250

PORTED 4 PORT  EWF-250-4

TANDEM EZF-250

MOTOR EUF-250-M

MOTOR TANDEM

FAN MOTOR

STEP DOWN CW EPB-250/215 CW

STEP DOWN CCW EPB-250/215 CCW

ADD ON 2 BOLT A CW EAAP250 2bA CW

ADD ON 2 BOLT A CCW EAAP250 2bA CCW

ADD ON 2 BOLT B CW EAAP250 2bB CW

ADD ON 2 BOLT B CCW EAAP250 2bB CCW

265

PORT END COVERS

PORTED EWG-265

PORTED 4 PORT 

TANDEM EYG-265

MOTOR EWG-265-M

MOTOR TANDEM EYG-265-M

FAN MOTOR

STEP DOWN CW EPB-265/230 CW

STEP DOWN CCW EPB-265/230 CCW

ADD ON 2 BOLT A CW EAAP265 2bA CW

ADD ON 2 BOLT A CCW EAAP265 2bA CCW

ADD ON 2 BOLT B CW EAAP265 2bB CW

ADD ON 2 BOLT B CCW EAAP265 2bB CCW

Dimensions are for reference purposes onlyPORT END COVERS

Page 18: Bushing Pumps

BUSHING RANGE - Quick Reference

F

3.9

BEARING CARRIERS

1 OUTLET FWC-230-1

2 OUTLET FWC-230-2

MOTOR FWC-230-M

3" SUCTION

230

BEARING CARRIERS

1 OUTLET FZG-265-1

2 OUTLET FZG-265-2

MOTOR FZG-265-M

3" SUCTION FZG-265-3

265

BEARING CARRIERS

1 OUTLET FYK-215-1

2 OUTLET FYK-215-2

MOTOR FYK-215-M

3" SUCTION

215

BEARING CARRIERS

1 OUTLET FTF-250-1

2 OUTLET FTF-250-2

MOTOR FTF-250-M

3" SUCTION

250

Dimensions are for reference purposes onlyBEARING CARRIERS

Page 19: Bushing Pumps

BUSHING RANGE - Quick Reference

2

Manufactured in South Africa

G

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

3.10

THRUST PLATES

PUMP GCI-215 GCI-230 GCI-250 GCI-265

MOTOR GM-215 GM-230 GM-250 GM-265

215 230 250 265

THRUST PLATE SEALS

PUMP CHANNEL SEAL H1 HCI-215-CS HCI-230-CS HCI-250-CS HCI-265-CS

PUMP CHANNEL SEAL BACKUP H2 HCI-215-CSBU HCI-230-CSBU HCI-250-CSBU HCI-265-CSBU

MOTOR SEAL BACKUP H3 HM-215-MSBU HM-230-MSBU HM-250-MSBU HM-265-MSBU

MOTOR END SEAL H4 HM-215-MES HM-230-MES HM-250-MES HM-265-MES

MOTOR SIDE SEAL H5 HM-215-MSS HM-230-MSS HM-250-MSS HM-265-MSS

H

I215

CONNECTING SHAFTS

STANDARD IZK-215

STEP DOWN

ADD ON TO 9 SPLINE

ADD ON TO 13 SPLINE

ADD ON TO 15 SPLINE

230

CONNECTING SHAFTS

STANDARD IZC-230

STEP DOWN IPB-230/215

ADD ON TO 9 SPLINE

ADD ON TO 13 SPLINE

ADD ON TO 15 SPLINE

250

CONNECTING SHAFTS

STANDARD IYF-250

STEP DOWN IPB-250/215

ADD ON TO 9 SPLINE IAAP-250/9SPL

ADD ON TO 13 SPLINE IAAP-250/13SPL

ADD ON TO 15 SPLINE

Dimensions are for reference purposes only

THRUST PLATES

THRUST PLATE SEALS

CONNECTING SHAFTS

Page 20: Bushing Pumps

BUSHING RANGE - Quick Reference

3.11

I

ALL STUDS HAVE EXTENDED THREAD ON ONE SIDE AND CAN BE CUT SHORTER TO REQUIRED SIZE

J

215 230 250 265

LOOSE SHAFTS

7/8" KEY JCK-230

1" KEY JGD-215 JCD-230

1 1/8" KEY JHH-230 JHH-250

1 1/4" KEY JCW-230

14 SPLINE 1 1/4" JCH-230

15 SPLINE 1" JFG-250

17 SPLINE JKG-265

J

K BEARINGS/BUSHES

BUSHES K2 KBUSH-215 KBUSH-230 KBUSH-250 KBUSH-265

SHAFT BALL BEARING K1 KX-131-40 KX-151-58 KX-176-59

ADD ON KAAP-250/265 KAAP-250/265

K

L SEALS

BODY SEALS L2 LUB-215-239 LUB-131-242 LUB-250-244 LUB-265-250

MOTOR BODY SEAL LUB-215-239M

PUMP SEAL STANDARD L1 LX-215 LX-131-16 LX-151-17 LX-176-10

MOTOR SEAL STANDARD LX-215-M LX-131-9 LX-151-8 LX-176-1

PUMP SEAL TELLTALE LPA-250-TT

PUMP SEAL LOOSE SHAFT LX-131-18 

MOTOR SEAL LOOSE SHAFT LX-131-11 

PUMP SEAL VITON LX-131V-16 LX-151V-17 LX-176V-10

L

M RETAINERS

SEAL RETAINER TELLTALE MNA-230-1 MPA-250 MTT-265

M

DOWELS

STANDARD NDOWEL-215 NDOWEL-131 NDOWEL-131 NDOWEL-265

MOTOR NDOWEL-265M

N

Q SPACER

SEAL SPACER QAE-215 QAE-131 QAC-151 

BEARING SPACER QVB-131-2 QVB/AC-151 QVB-176

SHAFT SPACER QTB-131 QAF-176

Q

R KEYS

SELECT AS PER KEY SHAFT RX-?? RX-?? RX-?? RX-??R

S SNAP RINGS/CIRCLIPS

SHAFT SX-131-100 SX-151-125 SX-176-137

SHAFT END COVER SX-215 SX-131-206 SX-151-283 SX-176-315

ADD ON SAAP250/265 SAAP250/265

S

V FASTENERS

BOLTS VBOLT 1/2" X ? VBOLT 5/8" X ? VBOLT 5/8" X ? VBOLT 5/8" X ?

NUTS V2 VNUT 1/2" VNUT 5/8" VNUT 5/8" VNUT 5/8"

WASHERS V1 VWASHER 1/2" VWASHER 5/8" VWASHER 5/8" VWASHER 5/8"

STUDS 06"-11" V3 VSTUD 1/2"X6-11 VSTUD 5/8"X6-11 VSTUD 5/8"X6-11 VSTUD 5/8"X6-11

STUDS 11"-16" V3 VSTUD 1/2"X11-16 VSTUD 5/8"X11-16 VSTUD 5/8"X11-16 VSTUD 5/8"X11-16

STUDS 16"-21" V3 VSTUD 1/2"X16-21 VSTUD 5/8"X16-21 VSTUD 5/8"X16-21 VSTUD 5/8"X16-21

STUDS 21"-26" V3 VSTUD 1/2"X21-26 VSTUD 5/8"X21-26 VSTUD 5/8"X21-26 VSTUD 5/8"X21-

V

W SMALL PARTS

PLUG DRAIN WX-131-11 WX-131-11 WX-131-11 WX-131-11

PLUG SHAFT END COVER WT-131-1391 WT-131-1391 WT-131-1391 WT-131-1391

CHECK VALVES WM-131-1391 WM-131-1391 WM-131-1391 WM-131-1391

W

265

CONNECTING SHAFTS

STANDARD IAG-265

STEP DOWN IPB-265/230

ADD ON TO 9 SPLINE IAAP-265/9SPL

ADD ON TO 13 SPLINE IAAP-265/13SPL

ADD ON TO 15 SPLINE IAAP-265/15SPL

Dimensions are for reference purposes onlyCONNECTING SHAFTS

Page 21: Bushing Pumps

BUSHING RANGE - Pump & Motor Dimensions

4.1

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

SERIES 215SERIES 215

ADCE

seetable

ADCE FC

seetable

seetable

DCE CC F F

seetable

seetable

seetable

E

A

- 05

- 07

-10

-12

-15

-17

-20

Cinches mm

HOUSING TABLE .

7/8"

1 1/8"

1 3/8"

1 5/8"

1 7/8"

2 1/8"

2 3/8"

22.22

28.57

34.92

41.27

47.62

53.97

60.32

Dimensions are for reference purposes only

Page 22: Bushing Pumps

BUSHING RANGE - Pump & Motor Dimensions

4.2

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

SERIES 230SERIES 230

ADCE

seetable

ADCE FC

seetable

seetable

DCE CC F F

seetable

seetable

seetable

E

A

- 05

- 07

-10

-12

-15

-17

-20

Cinches mm

HOUSING TABLE .

1"

1 1/4"

1 1/2"

1 3/4"

2"

2 1/4"

2 1/2"

25.40

31.75

38.10

44.45

50.80

57.15

63.50

Dimensions are for reference purposes only

Page 23: Bushing Pumps

BUSHING RANGE - Pump & Motor Dimensions

4.3

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

SERIES 250SERIES 250

ADCE

seetable

ADCE FC

seetable

seetable

DCE CC F F

seetable

seetable

seetable

E

A

- 05

- 07

-10

-12

-15

-17

-20

-22

-25

Cinches mm

HOUSING TABLE .

1"

1 1/4"

1 1/2"

1 3/4"

2"

2 1/4"

2 1/2"

2 3/4"

3"

25.40

31.75

38.10

44.45

50.80

57.15

63.50

69.85

76.20

Dimensions are for reference purposes only

Page 24: Bushing Pumps

BUSHING RANGE - Pump & Motor Dimensions

4.4

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

SERIES 265SERIES 265

ADCE

seetable

ADCE FC

seetable

seetable

DCE CC F F

seetable

seetable

seetable

E

A

- 05

- 07

-10

-12

-15

-17

-20

-22

-25

Cinches mm

HOUSING TABLE .

1 1/4"

1 1/2"

1 3/4"

2"

2 1/4"

2 1/2"

2 3/4"

3"

31.75

38.10

44.45

50.80

57.15

63.50

69.85

76.20

Dimensions are for reference purposes only

Page 25: Bushing Pumps

BUSHING RANGE - Porting

5.1

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

Dimensions are for reference purposes only

A

B

Z Thread

SAE Flange Dash A B Thread ( Z )

Size ( D ) Size mm inches mm inches UNC Metric

1/2" - 08 38.10 1.5 17.48 0.69 5/16" M8

3/4" - 12 47.63 1.88 22.23 0.88 3/8" M10

1" - 16 52.37 2.06 26.19 1.03 3/8" M10

1 1/4" - 20 58.72 2.31 30.18 1.19 7/16" M10

1 1/2" - 24 69.85 2.75 35.71 1.41 1/2" M12

2" - 32 77.77 3.06 42.88 1.69 1/2" M12

2 1/2" - 40 88.90 3.50 50.80 2.00 1/2" M12

3" - 48 106.38 4.19 61.93 2.44 5/8" M16

Port UNO (ODT)

Size Dash Size Port ID (mm) Thread

1/8" - 05 6.85 (0.27) 5/16" - 24

1/4" - 07 10.00 (0.39) 7/16" - 20

3/8" - 09 13.00 (0.51) 9/16" - 18

1/2" - 12 17.60 (0.69) 3/4" - 16

5/8" - 14 20.50 (0.81) 7/8" - 14

3/4" - 17 25.00 (0.98) 1 1/16"-12

1" - 21 31.30 (1.23) 1 5/16" - 12

1 1/4" - 26 39.20 (1.54) 1 5/8" - 12

1 1/2" - 30 45.60 (1.79) 1 7/8" - 12

2" - 40 61.50 (2.42) 2 1/2" - 12

mm (inches) UNF

Port NPT

Size Dash Size Port ID (mm) Thread

Port BSPP

Size Dash Size Port ID (mm) Thread

1/8" - 02 8.59 (0.34) 1/8" - 28

1/4" - 04 11.46 (0.45) 1/4" - 19

3/8" - 06 14.96 (0.59) 3/8" - 19

1/2" - 08 18.65 (073) 1/2" - 14

5/8" NA NA NA

3/4" - 12 24.13 (0.95) 3/4" - 14

1" - 16 30.30 (1.19) 1" - 11

1 1/4" - 20 38.97 (1.53) 11/4" - 11

1 1/2" - 24 44.86 (1.77) 11/2" - 11

2" - 32 56.67 (2.23) 2" - 11

mm (inches) BSPP

1/8" - 02 10.32 (0.40) 1/8" - 27

1/4" - 04 13.89 (0.55) 1/4" - 18

3/8" - 06 17.06 (0.67) 3/8" - 18

1/2" - 08 21.43 (0.84) 1/2" - 14

5/8" NA NA NA

3/4" - 12 26.98 (1.06) 3/4" - 14

1" - 16 33.33 (1.31) 1" - 111/2

1 1/4" - 20 42.46 (1.67) 11/4" - 111/2

1 1/2" - 24 48.42 (1.90) 11/2" - 111/2

2" - 32 60.32 (2.37) 2" - 111/2

mm (inches) NPT

Page 26: Bushing Pumps

BUSHING RANGE - Torque Settings

5.2

2

Manufactured in South Africa

All product listed herein is product manufactured and/or supplied by Gear Pump Manufacturing (Pty) Limited (“GPM”), a South African manufacturer and supplier ofreplacement parts and components.

“Commercial Intertech” is a registered trademark or copyright of the Parker Hannifin Corporation (“Parker”). Any reference to this entity, its trademark, copyright,product or reference number, is for product comparison and reference purposes only and as such, any referral thereto should not be construed as implying in any way

that Parker product is manufactured or supplied by GPM or that GPM is in any way associated with Parker.”

Copyright © 2009 Gear Pump Manufacturing (Pty) Limited All Rights Reserved. No part of this document may be reproduced in any form or manner without permission.

Model ThreadBolt/Stud

Nm Kpm FT-LBS IN-LBS  Grade

 

  GP215 1/2" UNC 8 192 19.5 110 1700

GM215 1/2" UNC 8 192 19.5 110 1700

GF215 1/2" UNC 8 192 19.5 110 1700

GP230 5/8" UNC 8 271 27.5 200 2400

GM230 5/8" UNC 8 271 27.5 200 2400

GF230 5/8" UNC 8 271 27.5 200 2400

GP250 5/8" UNC 8 271 27.5 200 2400

GM250 5/8" UNC 8 271 27.5 200 2400

GF250 5/8" UNC 8 271 27.5 200 2400

GP265 5/8" UNC 8 271 27.5 200 2400

GM265 3/4" UNC 8 609 62 450 5400

GF265 3/4" UNC 8 609 62 450 5400

Add on units

  GP230AAP 1/2" UNC 5 68 7 50 600

GP250AAP 1/2" UNC 5 68 7 50 600

GP265AAP 1/2" UNC 5 68 7 50 600

PUMPS, MOTORS AND FLOWDIVIDERS

STEP DOWN

SERIES 265 - 2 BOLT A

SERIES 265 - 2 BOLT B

SERIES 250 - 2 BOLT A

SERIES 250 - 2 BOLT B

ADD ONSERIES 265 - 230

SERIES 250 - 215

SERIES 230 - 215

STANDARD

SERIES 265 - 265

SERIES 250 - 250

SERIES 230 - 230

SERIES 215 - 215E

E F

Page 27: Bushing Pumps

TAR

GA

GR

AP

HIC

S: +

27 4

4 62

0 40

42

Cape Town - South Africa

ENGINEERINGTECHNOLOGY

SERVICES(Pty) Ltd

GEAR PUMPMANUFACTURING

(Pty) Ltd

Manufacturing Plant (Cape Town)Gear Pump Manufacturing (Pty) Lid.15 Moody Ave, Epping 1, Cape Town, South AfricaTel: +27 (0) 21 531 9330Fax: +27 (0) 21 531 7096e-mail: [email protected]: [email protected]: [email protected]: www.gearpumpsa.com

GEAR PUMPDISTRIBUTORS

Distributor (Sydney)Gear Pump Distributors Australia Pty Limited.Unit 1, 8 Prince William Drive, Seven Hills, 2147, N.S.W. Australia.Tel: +61 (0) 2 9674 2298 / 2067Fax: +61 (0) 2 9674 1934e-mail: [email protected]: www.gearpump.com.au

Distributor (Birmingham)Gear Pump Distributors (UK) LtdUnit 14, Aston Fields Trading Estate, 18 Sugarbrook Road, Bromsgrove,Worcestershire B60 3DWTel: +44 (0) 1527 880 396Fax: +44 (0) 1527 880 397e-mail: [email protected] / [email protected]: www.gearpumps.co.uk

MANUFACTURINGTECHNOLOGY SERVICES

PROPERTIES

Remanufacturing Facility (Johannesburg)Dosco Precision Hydraulics (Pty) Ltd.No.6 Impangela Road, Sebenza Ext. 6,Gauteng, South AfricaTel: +27 (0) 11 452 5843Fax: +27 (0) 11 609 7955e-mail: [email protected]: [email protected]: [email protected]: www.dosco.co.za

P R E C I S I O NHYDRAULICS

HOLDINGS

P H I

PRECISIONHYDRAULICS INT.

2

Manufactured in South Africa Member of the Fluid Power Institute

6.1