burner management - cimarron energy management features • the arc controller is designed for use...
TRANSCRIPT
Bur
ner M
anag
emen
t
Product OverviewThe Cimarron ARC is a fully scalable BMS that allows
you to only pay for what you need. Need to light and operate
a flare or a combustor? Need full control of multiple line
heaters with temperature, pressure, and level monitoring? No
problem. Upgraded firmware and necessary instrumentation
are available. Whether you’re operating a line heater, treater,
reboiler, flare, combustor, or other natural gas-fired equipment,
the ARC is flexible and provides successful and safe operation
of your equipment.
The ARC provides fully automated direct spark ignition, control of
multiple burners, temperature and pressure monitoring, Modbus
RS-485 communication, and on-board data logging. Modbus
RS-485 and 4-20mA input are standard features at no additional
cost. The ARC is exceptional in its low power consumption,
an important feature that minimizes the cost if solar power
packages are required.
Installation is simple, and the exterior keypad on the NEMA 4X
enclosure allows user-friendly control of the menus and settings.
The display is a four-line organic light emitting diode (OLED),
providing information on status and menu options. A Quick
Response Code (QR) on the front of the enclosure allows you
to access and download documentation on your smart device
whenever you need help.
The ARC was designed by Cimarron Energy, a leading
manufacturer of upstream and midstream solutions for oil and
gas operators. We understand what is required in operating your
equipment. The product is also manufactured, assembled, and
tested by Cimarron Energy at its facilities in Colorado, providing
total quality control over every unit.
BURNER MANAGEMENT
FEATURES• The ARC controller is designed for use with flares, combustors,
indirect heaters, treaters, reboilers, and other natural gas fired equipment commonly used in the oil and gas production segment
• Fully automated direct spark ignition
• Control of both pilot and main burners
• Customer PLC compatibility with Modbus RTU over RS-485 communication protocol (standard)
• On-board data logging and time stamping with event logging of up to two years with 4 megabytes of internal storage
• 12 / 24 VDC compatible
• I/O for temperature, pressure and valve control
SPECIFICATIONS• Class 1, Division 2, Groups ABCD, Pending
• NEMA 4X Polycarbonate Enclosure
• -40°F to 140°F (-40°C to 60°C)
• RS-485 ports with Modbus RTU
• 4-20mA input (4-20mA output available)
• Large 4x20 OLED display
• Multi-function tactile keypad
• Dimensions: 10” x 12” x 6”
• 12 / 24 VDC compatible
• Outputs: (2) latch valves or up to (4) solenoid valve outputs; (1) general purpose digital output; (1) alarm output; (1) flexible auxiliary I/O
• Inputs: (3) thermocouple inputs, (4) general purpose digital inputs, and (1) pressure transducer input
Cimarron provides other accessories that may be needed to operate fired equipment.
These can be ordered with the ARC or at your convenience.
PRODUCTCONFIGURATOR
N - Non-classified areaC - C1D2 Compliant
AREA CLASSIFICATIONAREA
APPLICATION1 - Enclosed Combustor2 - Single Production Unit3 - Dual Production Unit4 - Heater Treater5 - Dehy/Amine Reboiler6 - Line Heater
APPLICATION
VALVE 1 (Pilot ValVe)0 - Valve Not Required1 - 1/4″ 0.55W Valve2 - 3-Wire Latch Valve
VALVE 1
VALVE 2 (Main Burner)0 - Valve Not Required1 - 1/4″ 0.55W Valve2 - 3-Wire Latch Valve3 - 1″ 2W Valve
VALVE 2SYSTEM POWER0 - 12VDC Available On-Site1 - 24VDC Available On-Site2 - AC Power Available On-Site3 - Power Package Required
SYSTEM POWER
TEMPERATURE MONITOR 10 - Thermocouple Not Required1 - 6″ Type K Thermocouple w/ Thermowell2 - 12″ Type K Thermocouple w/ Thermowell
TEMPERATURE 1
TEMPERATURE MONITOR 20 - Thermocouple Not Required1 - 6″ Type K Thermocouple w/ Thermowell2 - 12″ Type K Thermocouple w/ Thermowell
TEMPERATURE 2
PRESSURE MONITORING0 - Transducer Not Required1 - 0-5 PSI Transducer2 - 0-30 PSI Transducer3 - 0-100 PSI Transducer4 - 0-500 PSI Transducer
PRESSURE MONITORING
1 2 3 4 5 6 7 8
ACCESSORIES
BURNER MANAGEMENT
• Cimarron inline pilot assembly and cabling
• Flameco pilot assembly and cabling
• Replacement parts kit
• Power package 1: 5W solar panel and battery backup
• Power package 2: 20W solar panel and battery backup
• Customized fuel train packages
• AC/DC power converters
• Additional I/O ca be added using DIN rail mounted expansion modules
• 4-20mA output module
• Supply gas scrubber, 10” x 19”
Sales and ServiceDenver, COBerthold, NDWilliston, NDOklahoma City, OKHouston, TXMidland, TXPittsburgh, PAIndiana, PAVernal, UTCharleston, WVCasper, WY
ManufacturingGrafton, NDEvans, COEnglewood, CONorman, OKMarlow, OKKaty, TX
ContactSales 405-928-7373
CimarronEnergy.com