burj al-arab

8
Burj Al-Arab

Upload: kelii

Post on 25-Feb-2016

471 views

Category:

Documents


1 download

DESCRIPTION

Burj Al-Arab. This is a luxury hotel located in Dubai, United Arab Emirates. At 321 m (1,050 ft), it is the second tallest building in the world used exclusively as a hotel. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: Burj Al-Arab

Burj Al-Arab

Page 2: Burj Al-Arab

This is a luxury hotel located in Dubai, United Arab Emirates. At 321 m (1,050 ft), it is the second tallest building in the world used exclusively as a hotel.

Page 3: Burj Al-Arab

The Burj Al Arab stands on an artificial island 280 m (920 ft) out from Jumeirah beach, and is connected to the mainland by a private curving bridge. It is an iconic structure, designed to symbolize Dubai's urban transformation and to mimic the sail of a boat.

Page 4: Burj Al-Arab

THE HOTEL AT NIGHT TIME CONSTRUCTION

Construction of Burj Al Arab began in 1994. It was built to resemble the sail of a dhow, a type of Arabian vessel. Two "wings" spread in a V to form a vast "mast", while the space between them is enclosed in a massive atrium. The architect Tom Wright

said "The client wanted a building that would become an iconic or symbolic statement for Dubai; this is very similar to Sydney with its Opera House, or Paris with the Eiffel Tower. It needed to be a building that would become synonymous with the name of the country.“

Page 5: Burj Al-Arab

Inside the building, the atrium is 180 meters (590 ft) tall. During the construction phase, to lower the interior temperature, the building was cooled by half-degree increments over a period of three to six months. This was to prevent large amounts of "condensation or in fact even a rain cloud from forming in the hotel during the period of construction." This task was accomplished by several cold air nozzles, which point down from the top of the ceiling, and blast a 1 meter cold air pocket down the inside of the sail. This creates a buffer zone, which controls the interior temperature without massive energy costs. citations needed]Burj Al Arab characterizes itself as the world's only "7-star" property, a designation considered by travel professionals to be hyperbole. All major travel guides and hotel rating systems have a 5-star maximum, which some hotels attempt to out-do by ascribing themselves "6-star" status. Yet according to the Burj Al Arab's official site, the hotel is a "5-star deluxe hotel". It is the world's tallest structure with a membrane façade and the world's tallest hotel (not including buildings with mixed use) and was the first 5-star hotel to surpass 1,000 ft (305 m) in height. Although it is characterized as the world's only 7-Star Hotel, several "7 Star" hotels are under construction. These include the Flower of the East under construction in Kish, Iran, The Centaurus Complex under construction in Islamabad, Pakistan and a complex planned for Metro Manila in the Philippines

The construction

Page 6: Burj Al-Arab

several features of the hotel required complex engineering feats to achieve. The hotel rests on an artificial island constructed 280 meters offshore. To secure a foundation, the builders drove 230 40-meter long concrete piles into the sand. The foundation is held in place not by bedrock, but by the friction of the sand and silt along the length of the pilesEngineers created a surface layer of large rocks, which is circled with a concrete honey-comb pattern, which serves to protect the foundation from erosion. It took three years to reclaim the land from the sea, but less than three years to construct the building itself. The building contains over 70,000 cubic meters of concrete and 9,000 tons of steel

FEATURES

Page 8: Burj Al-Arab

The architect who designed the hotel was Tom Wright, Born on September 18th 1957. Wright studied at the Royal Russell School and then later at the King University School of Architecture. Qualified in 1983, Wright currently works with Atkins.