bulletin 35

27
23 EASTERN RAILWAY MANUAL TENDERS BULLETIN NO. 35 / 09 – 10 Tender No. P.L.No. Description Qty. To be opened Abbreviation TR GP at 11 hrs. on TENDERS of SMM (D) / HWH (Delivery Place – Howrah) 51.10.6007 75/40 Retro Reflective Sheet for 80 (Eighty) Nos. 27-Aug-2010 B,C, ‘P’marker plate. IC,DD 51.09.6008 75/40 Retro reflective Sheet for 480 (four 27-Aug-2010 B,C, ‘G’ marker Plate. Hundred Eighty) IC,DD 51.09.6009 56/90/SPL Assembly of Lock type 24 Nos. 300 (Three 27-Aug- 2010 B,C, spring Annunciater Key as per hundred) Nos. IC,DD Drg No. -BSA/29/612 of SW/HWH. 51-10-6010 56/13 Two frequency audio electronic 100 (One 27-Aug- 2010 B,C, Buzzer Drawing No-BSA/29/259. Hundred) Nos. IC,DD 51-08-6013 56/SPL/13 Space as per Drg No-S/22885, 21 Sets. 27-Aug- 2010 B,C, Bracket as per drg No:-S/22870 IC,DD and Retaining piece A&B as per Drg No :-S/22871 & 22872 for Indicator Assembly (One set Consist 2 Nos. of space the Bracket And Retaining piece A&B). 51-08-6040 91/51 Resin Core Solder Gr: 80:20 EYRE 15( Fifteen) Kgs. 27-Aug- 2010 B,C, Make/ Point make or Equivalent IC,DD (in500 Gram packet). 51-08-6041 71/10 Ring Cane(As per Drawing 250 (Two 27-Aug- 2010 B,C, No.-BS/29/692. Hundred Fifty) Nos IC,DD 51-07-6052 56/90 Box (FRP) Sub Assembly of Track 100 (One Hundred) Nos. 27-Aug- 2010 B,C,IC Lead Junction Box as per-Drawing No- S/20/02/M & RDSO space. 51-07-6054 56/46 Health of the Monitoring unit . Green 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC accept main led signal lighting unit 10 V AC. Retrofitabe in existing CLS housing and Compatible with AC LED ECR/AC conventional ECR as per RDSO specn No-RDSO/SPN/153/2004 Version :-3.0 ( Draft of Latest ). 51-07-6055 5646 Health Monitoring unit to use with 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Yellow aspect main Led Signal Lighting unit 110V AC.retrofitable In existing CLS housing and compatible with AC LED ECR/AC-conventional ECR As per RDSO/SPN/153/2004 Version 3.0(Draft) or Latest. 51-07-6056 56/46 Health Monitoring unit to use with 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Red Aspect main led signal lighting- G unit110 V AC .Regrettable in existing CLS Housing and compatible with AC LED ECR/AC conventional ECR as per RDSO speech No-RDSO/ SPN 153/2004. Version -3.0 (Draft) or Latest.

Upload: vikash-singhi

Post on 08-Apr-2015

378 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Bulletin 35

23

EASTERN RAILWAY MANUAL TENDERS

BULLETIN NO. 35 / 09 – 10

Tender No. P.L.No. Description Qty. To be opened Abbreviation

TR GP at 11 hrs. on

TENDERS of SMM (D) / HWH (Delivery Place – Howrah)

51.10.6007 75/40 Retro Reflective Sheet for 80 (Eighty) Nos. 27-Aug-2010 B,C,

‘P’marker plate. IC,DD

51.09.6008 75/40 Retro reflective Sheet for 480 (four 27-Aug-2010 B,C, ‘G’ marker Plate. Hundred Eighty) IC,DD 51.09.6009 56/90/SPL Assembly of Lock type 24 Nos. 300 (Three 27-Aug- 2010 B,C, spring Annunciater Key as per hundred) Nos. IC,DD Drg No. -BSA/29/612 of SW/HWH. 51-10-6010 56/13 Two frequency audio electronic 100 (One 27-Aug- 2010 B,C, Buzzer Drawing No-BSA/29/259. Hundred) Nos. IC,DD 51-08-6013 56/SPL/13 Space as per Drg No-S/22885, 21 Sets. 27-Aug- 2010 B,C, Bracket as per drg No:-S/22870 IC,DD and Retaining piece A&B as per Drg No :-S/22871 & 22872 for Indicator Assembly (One set Consist 2 Nos. of space the Bracket And Retaining piece A&B). 51-08-6040 91/51 Resin Core Solder Gr: 80:20 EYRE 15( Fifteen) Kgs. 27-Aug- 2010 B,C, Make/ Point make or Equivalent IC,DD (in500 Gram packet). 51-08-6041 71/10 Ring Cane(As per Drawing 250 (Two 27-Aug- 2010 B,C, No.-BS/29/692. Hundred Fifty) Nos IC,DD 51-07-6052 56/90 Box (FRP) Sub Assembly of Track 100 (One Hundred) Nos. 27-Aug- 2010 B,C,IC Lead Junction Box as per-Drawing No- S/20/02/M & RDSO space. 51-07-6054 56/46 Health of the Monitoring unit . Green 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC accept main led signal lighting unit 10 V AC. Retrofitabe in existing CLS housing and Compatible with AC LED ECR/AC conventional ECR as per RDSO specn No-RDSO/SPN/153/2004

Version :-3.0 ( Draft of Latest ). 51-07-6055 5646 Health Monitoring unit to use with 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Yellow aspect main Led Signal Lighting unit 110V AC.retrofitable In existing CLS housing and compatible with AC LED ECR/AC-conventional ECR As per RDSO/SPN/153/2004 Version 3.0(Draft) or Latest. 51-07-6056 56/46 Health Monitoring unit to use with 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Red Aspect main led signal lighting- G unit110 V AC .Regrettable in existing CLS Housing and compatible with AC LED ECR/AC conventional ECR as per RDSO speech No-RDSO/ SPN 153/2004. Version -3.0 (Draft) or Latest.

Page 2: Bulletin 35

24

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6 51-07-6057 56/46 Green aspect main led signal lighting 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Unit 110 V AC retrofit table existing CLS housing and compatible with AC Led ECR/AC Conventional ECR as per RDSO Specn NoRDSO/SPN/153/2004. Version 13.0(Draft)or Latest. 51-07-6058 56/46 1.Current Regulator Yellow Aspect : 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Main led Signal lighting Unit 110 V AC Retrofit able in existing CLS Housing and corapatible ECR as per RDSO SPN/153/2004. Version :-3.0(Draft) or Latest.

51-07-6059 56/46 Red aspect Main LED Signal Lighting 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Unit 110V AC retrofit table in existing CLS housing and compatible with AC LED ECR/AC conventional ECR as RDSO/spen 153/2004. Version:-3.0 (Draft) or Latest.

51-07-6060 56/46 Yellow aspect main LED signal lighting 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC,P

Unit 110 V AC retrofit table in existing CLS housing and compatible with AC LED ECR /AC Conventional ECR as per RDSO Spen No-RDSO/SPN No/153/2004. Version:-3.0(Draft) or Latest. 51-07-6061 56/46 Current Regulator Red aspect Mainled 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC Signal Lighting unit 110V AC retrofit table in existing CLS housing and compatible with AC LED ECR/AC conventional ECR as per RDSO/SPN/153/2004 Version :-3.0 (Draft) or Latest. 51-07-6062 56/46 Green aspect Main LED Signal Lighting 12 (Twelve ) Nos. 27-Aug- 2010 B,C,IC,P unit 110 V AC retrofit table In existing CLS housing and conventional with AC LED ECR/AC conventional ECR as per RDSO Spen No-RDSO/SPN 153/2004 Version-3.0(Draft) or Latest.. 51-08-6091 56/02/ Steel token ball for single block Instt 920 (Nine hundred 27-Aug- 2010 B,C,IC, SPL 1) Taken Ball Rectangular spigot Drg No:- twenty) Nos. W,P B/S/29/660=184. 2) Taken Ball Special spigot as per Drg No – BS/29/660=184. 3) Taken Ball Triangular Drg No:- BS/ 29/660=184. 4) Taken Ball Pentagon Drg

No:- BS/29/660=184. 5) Ball Taken special Cross-BS/29/660=184.

51-10-6009 75/40 Retro Reflective Sheet for- A 480 (Four hundred 27-Aug- 2010 B,C,IC, Marker Plate. eighty) Nos. DD, 51-10-6017 90/35 M.S .Flat 6 X 50 mm 2 (Two M.Ton) 27-Aug- 2010 B,C,IC, DD, .

TENDER(S) OF DY.CMM / LLH (Delivery Place – Liluah) 52/08/6023 4022 Alluminium conductor galvanised steel 1430 One Thousand 23-Aug-10 B,IR,M, 4025 wire reinforced, conductor Size: 30 mm² Four Hundred Thirty Q,MP,GP AL wire Size 6/2.59 mm Steel wire size Metres ½.59 mm.N.B. DP quoted should not be more than 60 days , else offer may not be considered.

Page 3: Bulletin 35

25

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

52/08/6427 4323 Electric Heating Plate Model No FAG 1 No. 23-Aug-2010 B,IC,M,Q, 4315 Heater-Plate-370 C Max Power 2200 W, W,,MP,GP 230V,50 Hz. Temp Control:- 100°C-370°C Plate Size- 350x350 mm, Device size 358x 358x170 mm, Make FAG/SKF/NSK., N.B. DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6106 7216 Absolute coolant proof digimatic varnier 3 Nos. 23-Aug-2010 B,IC,M,Q, 7258 caliper with thumb roller range - 0 to MP,GP,C 150 mm, resolution 0.01 mm, accuracy ± 0.02 mm weight164 to 168 grms. As per M/S Mitutoyo (Japan) order No. 500-622 or equivalent. Calibration cetificate is required. Make -, Mitutoyo/Moore & Wright/ Brown & Sharp/Sylvac N.B.:- (i) Firm should be OEM dealer and subdealer. (ii) DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6194 8601 Multipurpose nozzle (for fire fighting hose 1 No. 23-Aug-2010 B,IC,Q,GP 8615 Ø 63 mm) Model Nirmal 200 with Emergency low pressure arrangement 50-210-GPM. Make: Nirmal Rubber Industries/ Fire Shield/ Chattaria Rubber Chemical Industries., N.B. :- DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6304 7890 LPG on line industrial gas geyser, capacity- 28 Sets 23-Aug-2010 B,IR,M,Q, 7879 10 litre/minute;specification,features& MP,GP,C accessories as per annexure attached. Brand- Gaurav/Flowheat/Unitt., N.B.:- DP quoted should not be more than 60 days , else offer may not be considered.

52/09/6310 3816 32 NB pipe (BP) assembled with flange 25 Sets 23-Aug-2010 B,RD,IR,M, 3055 and socket to Drg. No. WD-90030-S-72, Q,MP, GP Alt-2 or latest.It-1,12,13 N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6326 4298 Hinge cover for blind socket assembly of 40 Nos. 23-Aug-2010 B,RF,IC, 4229 ZS coupling to Spec. No.EDTS-105,Rev- M,Q,MP,GP E of LHB AC coaches. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6358 4521 Condenser fans with fire retardant plastic 30 Nos. 23-Aug-2010 B,IC,MP, 4528 material blades conforming to RDSO's GP specification No. ELPS/SPEC/AC/03 (Rev 1) of Aug1999 with amdt No. 1 or latest. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6413 47987972 Carbon Brush for KEC Make 10HP 276 Nos. 23-Aug-2010 B,RD,IC, 4712 Compresor Motor of Size:50X31X16mm M,Q,MP, Carbon Grade:EG-14, Drg. No.LED/AC/3/558. GP N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6414 47989760 Carbon Brush for KEC Make Compresor 276 Nos. 23-Aug-2010 B,RD,IC,M, 4712 Motor 8.5 HP of Size:45X31X16mm Carbon Q,MP,GP Grade:EG-14, Drg. No.LED/AC/3/558. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered.

Page 4: Bulletin 35

26

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

52/09/6458 3042 Gas filled device reclining mechanism 100 Nos. 23-Aug-2010 B,IC, GP 3055 of reclining chairs.(Hydropneumatic gas spring mechanism)As per J&T LLH's Drg. No. 37/575 Brand: (I) Stablus block-0- Lift Mfg-Germany.(II) Varilock-Hy³ of M/S Suspa Pneumatic(I) Ltd., Chennai-600041, N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/09/6474 6590 Single car testing for Air brake system of 4 Nos. 23-Aug-2010 B,IC,RD,M, 6579 coaches J&T LLH's Drg. No. 44/1092.(To Q,MP,GP be procured from RDSO approved Air brake pipe or equivalent manufacturer). N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6089 4521 Non return valve (brass) size 1/4" flair 1280 Nos. 23-Aug-2010 B,IC,W,GP 4528 connection complete with male female. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6090 4521 Copper sleeve 1/2" (12.7mm) dia, thickness 1536 Nos. 23-Aug-2010 B,IC,GP, 4528 1.0mm (min) shall confirm to soft annealed MTC req grade copper to IS 10773-1983 for material & to IS 5493-1981 (Ist rev.) for diamentional requirement., N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6091 4521 Copper sleeve 7/8" (22mm) dia thickness 2560 Nos. 23-Aug-12010 B,IC,GP, 4528 1.0 mm (min) shall confirm to soft annealed MTC req grade copper to IS 10773 1983 for material & to IS5493-1981 (1st Rev) for diamentional requirement. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6092 4521 Copper elbow, Size - ½" (12.7 mm) 1536 Nos. 23-Aug-2010 B,IC,GP, 4528 dia, thickness 1.0 mm(min) shall confirm MTC req to soft annealed grade copper to IS 10773- 1983 for material to IS 5493-1981 (1st rev) for diamentional requirement. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6093 3028 Kit for flange for pipe joints consisting 180 Sets 23-Aug-2010 B,IC,GP 3055 of 3 (three) items as per annexure attached. N.B.:- (i) 20 Sets =AC,160 Sets=Non-AC (ii) DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6094 3016 Kit for pipe fittings for BMBC Air Brake 180 Sets 23-Aug-2010 B,IC,GP 3055 system conversion of coaches consisting of 04(four)items as per annexure attached. N.B.:- (i) 20 Sets =AC,160 Sets=Non-AC (ii) DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6095 7399 M20 x 120 long hex hd. Bolt with M20 1440 Sets 23-Aug-2010 B,IC,GP 7321 nut & M20 Spring washer, boltnut, IS: 1364, P-8.8/8.0, Spring washer IS: 3063 type - B (all galvanised) Make: TVS/ FORBES/LPS/UNK, N.B.:- (i) 160 Sets=AC 1280 Sets=Non-AC (ii) DP quoted should not be more than 60 days , else offer may. not be considered

Page 5: Bulletin 35

27

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

52/10/6096 7206 Nibbler (Portable 220 Volt) for stainless 2 Nos. 23-Aug- 2010 B,IC,M,Q, 7224 steel sheet cutting machine as per annexure MP,GP attached. N.B.:- (i) Supplier has to commission the machine after supply. (ii) DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6097 3098 SLR Observation glass on end wall of 75 Nos. 23-Aug- 2010 B,IC,MP,GP 3055 RCF coaches: Size:800x560x6.38mm, as per RCF's Drg. No-LB-54105,Alt-Nil. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6098 3098 Cutting table as per ICF Drg. No. WCB5- 75 Nos. 23-Aug- 2010 B,IC,MP,GP 3057 6-4-508, Alt. Nil. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6099 30983228 Drain cock 1/2" for Auxiliary Reservoir 900 Nos. 23-Aug- 2010 B,RD,R,GP 3052 fitted with 1/2" Hex nipple & 1/2" nipple for Drainage RDSO Sk. No. 98003,Alt nil or latest. N.B. (i) 100 Nos=AC, 800 Nos= Non-AC DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6102 3012 Centre pivot pin Drg. No. T-0-6-02,Alt.W/ 20 Sets 23-Aug- 2010 B,IR,W, 3057 14.(One coach set consists of 02 Nos. centre MP,GP,C pivot pin.) N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6103 3098 Set of lavatory air exhauster and perforsted 288 Sets 23-Aug- 2010 B,IR,GP,C 3057 sheet as per schedule consisting of two items. I) Lavatory air exhauster to drg. No. ICF/SK-4-2-097, alt-Nil. II) Perforsted sheet to drg. No. AF-42193, N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6104 4521 Copper elbow 5/8" (15.875mm) dia,thickness 1024 Nos. 23-Aug- 2010 B,IC,GP, 4528 1.0mm(min) shall confirm to soft annealed MTC grade copper to IS:10773-1983 for material and IS: 5493-1981 (1st Rev.) for diamentional requirement., N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6105 4735 Spare contact Kits for power contactor 6 Nos. 23-Aug- 2010 B,IC,M, 4782 type:MNX-325,Cat No.CS-94160,Make; Q,GP L&T or similar in all respect. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6109 4521 Power contractor 3Pole,115 Amp capacity 12 Nos. 23-Aug- 2010 B,IC,M, 4528 suitable for 1000V,50HZ AC ,coil voltage Q, MP,GP 415V AC,with 2 No+2 NC,auxiliary contact blocks similar to C&S cat no. LC1-F115A(Overall dimension164mmX162mm),Make:ABB/GE/C&S/Siemens, N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6113 8490 Notice kit for AC coaches consisting of 360 Sets 23-Aug- 2010 B,IR,W, 8318 5 items.as per annexure attached. GP,C N.B.:- DP quoted should not be more than 60 days , else offer may not be considered.

Page 6: Bulletin 35

28

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

52/10/6114 3063 Towel rail in lavatory for upper class to 1440 Nos. 23-Aug- 2010 B,IR,GP,C 3052 drg no. LLH/SK 67/94 Alt 2. N.B.:- DP quoted should not be more than 60 days

else offer may not be considered. 52/10/6115 45993725 Compact fluorescent light fitting single 120 Nos. 23-Aug- 2010 B,IR,EE, 4216 (with 110V DC ballast) as per RCF Drg. MP,GP No. CC76415 for gang way light in NAC coaches N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6116 6230 RHS tube Size:4.8X50X100mm,length 20 Nos. 23-Aug- 2010 B,IC,GP 6213 2470mm,RCF drg. No. MI 000634,It-2, Alt-Nil. N.B.:- DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6118 30983216 Hose connection pipe complete with end 360 Nos. 23-Aug- 2010 B,IC,GP 3017 fittings and 3 Nos. nylon sealing washer as per drg. No. EMU/M-3-5-079,alt-K, Item 1,Size: 15mm bore X 600mm Long. N.B.:- (i) 40 Nos=AC,320 Nos=Non-AC, (ii) DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6119 3016 Set of Air Brake equipment for bogie 180 Sets 23-Aug- 2010 B,R,RD, 3059 mounted brake system consisting of 2 Nos. GP items as per annexture attached. N.B.:- (i) 20 Sets=AC, 160Sets=Non-AC (ii) DP quoted should not be more than 60 days , else offer may not be considered. 52/10/6120 7590 Nylon bottle holder without ring as per 3000 Nos. 23-Aug- 2010 B,IC,W, 7530 sample to be seen at DPS/LLH. N.B.:- DP GP quoted should not be more than 60 days , else offer may not be considered.

TENDER(S) OF DY.CMM / HLR (Delivery Place –Halisahar) 53/09/6020 18/03/10 ARC WELDING GOGGLES FOR 37.000 Nos. 27-Aug-2010 I, IC, A, 7621/SPL PROTECTION AGAINST INDIRECT B, C, Q WELDING SPAR Detailed specification of ARC welding goggles for protection against indirect welding spark Only the following makes shall be acceptable: Wuhan High- Tech Safety Application Co Ltd, Model: HTS EF EG 20010/Baldair F II retrofitted welding goggles/SeIIstrom 27400-11 striker TM retro fitted into lift front goggles. Should have a lift front assembly. Shopuld be capable of housing 2” x 4 ¼ ” single retrofit lens shade 11. Switching speed : 1/5000 secs (0.012 mili second) Goggles body should be made out of PVC.The goggles will be light weight narrow design and will be perfectly applicablefor tool cribs and job shops.Active viewing area will be 5. 25 sq. inch. UVIR protection should be up to shade 16. ( < 0. 0007 % & < 0.009 % ) Switching speed should be 0.5 mili second. The lens should be solar powered having power supply back up of Lithium rechargeable battery. Thickness 2” Sensor –2.Light state 3. Dark state- 11.Dark to light delay- 0.2 sec Filter dimension- 108 mm x 50 mm x 5 mm

Page 7: Bulletin 35

29

. BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

Viewing area : 93 mm x 31 Welding Hours/ mtr : 2000 hrs.Distance from which ARC can be sensed : 0.5 mtr.Operating Temperature- 14 to 148 deg F Storage Temperature – Room Temperature. Meets EN/ ANSI Standards ( En 379 : 2003-12 & ANSI Z 87.1- 2003 standards. ) The following documents to be attached with the final tender quotation on mandatory basis failing which the quotation will be considered technically rejected. Condition :- 1. Test certificate revealing compliance with EN/ANSI certification. 2.Original catalogue.3. Dealership/ sub- dealership certificate of the principal manufacturer. 4.Government Laboratory test certificate to be attached. 53/09/6021 18/03/10 ULTRA VISION GOGGLES FOR 50.000 Nos. 27-Aug-2010 I, IC, A, 7621/SPL GAS CUTTER. MAKE- UVEX, B, C, M, MODEL NO. 9301. 245/ ODYSSE II SHADE 5 CUTTING GOGGLES PART NO. 80243 OF SELL STROM/ PAN TAIWAN MODEL NO. SE 1131. Detailed specification of Goggles Cutters

Model and make: UVEX. Ultra vision Model no.9301 245/ Odysse II Shade 5 Cutting goggles. Part no.80243/ pan Taiwan, Model No.SE 1131.

Exceptional wearer comfort due to duo Component Technology combination of two different materials (hard/soft components) ensuring reduced pressure even after long periods of wear.Ergonomically designed ensuring unrestricted all round vision having one piece Supravision HC- AF lens Shade 5. The lens is extremely scratch –resistant on the outside and permanently anti fog on the inside. Can be worn comfortably over prescription spectacles. Adjustable head band. Impact proof, Dust Proof and Splash Proof Outstanding all through hidden ventilation 100% UV protection.Lens can be replaced if necessary.Resistant against molten metal and hot solid splash.The frame must the following markings- manufacturing identification mark, number of the optical standards, symbol of resistance to high- speed particles, certification mark-number of the certified body.The lens must have the following markings; scale number of filters, manufacturers identification code, optical class, symbol of mechanical strength, symbol of non adherence to molten metal, symbol of resistance to surface damage by fome particles, symbol of resistance to fogging.Approved in accordance to EN166 IF 349/ANSI Z 87.1-2003.Test certificate available from CLI Mumbai. Both body and lens will be embossed with CE marking/ANSI marking. Condition:- Following documents to be attached with the tender failing which the tender shall be treated as technically un suitable. 1.Original catalogue for identical item. 2.CE/ANSI test certificate for particular item. 3.CLI Mumbai Test Certificate for particular item. 4.Proven credential for particular item. 53/10/6001 28/04/10 CONTROL RESERVIOR WITH COMMON 25.000 Nos. 27-Aug-2010 RD, I, A, 38164693 PIPE BRACKET. RDSO'S SPECIFICATION C, M, Q, NO.C-K 209 OF AUG/02 OR RDSO SK. NO. MP, GP. WD-9-7951- S/10, ALT-3 OR LATEST.

Page 8: Bulletin 35

30

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

53/10/6002 28/04/10 RAILWAY CARRIAGE FAN 400 MM SWEEP, 88.000 Nos . 27-Aug-2010 RD, I, IR, 4518/SPL 24 V.DC.FIXED TYPE CONFIRMING TO IS. A, B,M, Q, 6680.1992 WITH DEVIATION AS PER ANNEXURE-H MP, & GP (REVISED IN DEC.2005) WITHOUT OPTIONAL CLAUSE 20. FAN BODY SHALL BE PAINTED IN BLACK COLOURS,GUARD & BLADES TO BE POWER COOLED IN BLACK COLOUR

53/10/6003 28/04/10 LED TYPE EMERGENCY LIGHT UNIT 60.000 Nos. 27-Aug-2010 RD, I, IR, 4599/SPL COMPLETE WITH BATTERY AND ALL A, B,M, Q,. OTHER ACCESSORIES FOR NON- AC MP & GP COACHES AS PER ICF SPECIFICATION NO. ICF/ELECT/917 REV. 01 DT. 01/09/2008.

TENDERS of SMM (D) / KPA Delivery Place – Kanchrapara) 53/10/6004 14/06/10 CAST IRON GRITS & STEEL SHOTS FOR 4500.000 KGS. 27-Aug-2010 9090/SPL AIR LESS CENTRIFUGAL SHOT BLASTING PLANT FOR BOGIE FRAME CLEANING. SPECIFICATION:- CAST IRON GRITS SIZE- G-25/30, IS- 4683. STEEL SHOT SIZE- S- 330 CONFIRMING TO SAE SPECIFICATION J- 827, IS- 4606. MATERIAL COMPOSITION : C- 0.85 % , P- 0.05 %, S- 0.05 % ( HYPER EUTECTOID STEEL HEAD TREATED AND TEMPERED) MATHOD OF HARDENING- WATER QUENCHED.DENSITY OF STEEL GRITS-275 LB S/FT, AVERAGE HARDNESS:40/50 HRC AS PER IS:4606 (J- 827/J- 444) PROPORTION-1:1 54/09/6064 8211xxxx Folding stretcher made of MS pipe 50 Nos . 23-Aug- 2010 B,C,IC, 3.17cm dia at least 16 Gauge thickness DD, GP with 04 nos legs it should be made of good quality canvas. The load bearing capacity should not less than120Kgs. With comfortable handle grip. Diamension 213cm.width 54cm. Height 15cm. Brand/Make:- Udyogi make Model No US-101 or similar. IS specification- Stretcher should be confirming to IS 4037/1967 or latest. Canvas should be confirming to IS: 1424/1970 or latest. NB:-material to be supplied strictly as per specification.

54/10/6032 83 SPL Set of spare for Networking setup 01 Set 23-Aug- 2010 B,C,IC,

of Auto CAD work station 1 Set DD, GP consisting of:1) Cat 6 UTP cable = 3 Boxes.(2) Cat 6 UTP information out let (Single type with surface mount Box)=18Nos.(3)24port 10/100 MBPS Switch Rack Mountable =1 No.(4)Cat 6 UTP Jack panel(24 port)=1 No.(5)Cat 6 UTP patch cord,2 Mtrs =19 No.(6)Cat 6 UTP patch cord, 1Mtrs =18 No.(7)9 U Wall Mount Networking Rack with PDU and Lockable Glass Door = 1 No.(8)Laying of Cable through PVC casing and capping = Mtrs.915.(9)Installation and commissioning charges – L.S. 54/10/6033 6704xxxx Heavy duty chain pulling Block. Cap -3000 02 Nos. 23-Aug- 2010 B, IC KG/3 Ton will alloy Steel chain grade with DD, GP lifting and load chain 20mtrs each Complete unit with ISI marked must. Make:- KEPRO/ INDEF/OMAX/GOODLIFT.NB:-MTC & GC as per IRS. Trams & conditions to be submitted along with the supply Approval from consignee or firm premises.

Page 9: Bulletin 35

31

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

54/09/6013 4222xxxx Automatic power factor panel Capacity 50 01 Nos. 25-Aug- 2010 B,IC,Q, 4226 KVAR Suitable for 415V AC 50HZ,3Phase GP DD, conforms to IS:13340-1993 as per following GP,M specification: Banking pattern(10x2,15x2 KVAR) Main MCCB+6 Stage IPFC,Indivitual MCB for each cap. Bank with Auto/Manual facility regulator: Micro processor based, Max temp. range: Ambient-25/+500 C, Type of service: Continuous system 3PH,4 wire digital Indication of P.F, Current THDI. Make L&T/Epcos/Havell’s. NB:- Inspection by consignee, i.e.representative of DY. CEE/G/KPA at firms remises. MTC,GC, Technical literature, catalogue of components & user manual to be produced at the time of inspection & supply. 54/10/6012 2361xxxx Crew Fan as per CLW’s specn. No. CLW/ 16 Nos. 25-Aug- 2010 B,I,Q, DD, ES/3/0110 Alt –‘C’ GP,LW 54/10/6014 2516xxxx 1 ¼” Isolating Cock without vent (Ball type) 180 Nos. 25-Aug- 2010 B,I,Q, DD, to CLW Drg.No.0/2/65/364 Alt No.(3) or GP,EE latest Ref No.8. 54/10/6015 3181xxxx Copper tube for roof bar O/D 20mm. x 200 Mtrs. 25-Aug- 2010 B,I,Q, 3055 12 SWG. IS 2501/IS : 191.ETP DD, GP. 54/10/6016 4736xxxx Spare contacts set for size – R, as per 10 Nos. 25-Aug- 2010 B,I,Q, DD, 4783 BCH cat. No. 6 – 288 suitable for BCH GP make, AC 3 Rating 415 volt, 200Amps capacity power contactor cat no. MCE 15RN3 B7. Acceptable brand:-BCH, L&T, Siemens. 54/10/6017 2361xxxx LED based adjustable spot light for Driver and 48 Nos. 25-Aug- 2010 B,IC,Q,DD, . Asst. Driver desk as per CLW spec. GP,LW No. CLW/ES/3/0042, Suitable for 110 Volt DC supply. 54/10/6018 4323xxxx Resistance wire for heating element Consisting of 20+10 =30 Kgs 25-Aug- 2010 B,IC,Q,DD, 1)Resistance wire for heating element with the GP,M following specification: IS-3725/1966 a) Dia of wire =3.25mm(10SWG) b) Composition = 80% Nickel 20% chromium c) Temperature = 11750 C d) Physical condition fully amended. e) Physical dimension round through out the length dia should not varry by more than 1.0% Resistance in ohms at 270C per metre marked on the reel shall not varry From the nominal resistance value declared by the manufacturer by more than the following amount – tolerance + 3%. Test certificate by the manufacturer should be given at the time of supply.Railway test will be carried out at Railway lab.=20Kgs.2) Specification same. Dia of wire-1.219(18SWG)=10Kgs. Acceptable brand:- Kanthal, RAIL, JLC. 54/10/6019 2394xxxx Set of spares of TAO – 659 brush holder. 30 Sets 25-Aug- 2010 B,IC,Q, 2351 Consisting of: (1) Arc horn for TAO brush DD, GP holder as per drg. No.4.TWD.092.385(sheet 5 of 13) Qty.= 06 Nos. per set. (2) Arc horn for TAO BHRR as per drg. No. 4.TWD.092.385 (sheet 3&4 of 13) Qty.= 01 no. per set, (3)Drum set for TAO brush holder as per drg No SKEL – 4494. Qty.= 18 Nos. per set, (4) Special washer for TAO brush holder (0.5mm. thickness) M.S. Drg no. TM.4G5. 4014. Qty.= 18 Nos. per set. Drawings may be seen from Dy. CEE/KPA’s office

Page 10: Bulletin 35

32

BULLETIN NO. 35 / 09 – 10 1 2 3 4 5 6

54/10/602 2594xxxx Gasket for bottom inspection cover for 230 Nos. 25-Aug- 2010 B,IC,Q,DD, TAO – 659 TM as per Drg. No. 3TWD. EE,GP. 092.460. sheet 9 of 12. 54/10/6021 3125xxxx Set of gasket for union Elbow (3 items) 1600 Sets 25-Aug- 2010 B,IC,Q,DD, 2383 as per KPA Drg No. ER/KPA EL/PCX GP,W,RT. 3G2.314 item No 4. Item size i)15 –21=7Nos./ Set. ii) 21 – 27=10Nos./Set.(iii) 26 – 37=7Nos./Set. NB:-Drawing may be seen from the office of SSE/15/KPA or Dy.CEE/G/KPA’s office.

54/10/6022 2594xxxx End shield (pinion end) for Traction 12 Nos. 25-Aug- 2010 B,I,Q,DD, motor type TAO-659 with tapper roller GP,RD,MP. bearing arrangement. RDSO Drg. No. SKEL – 4514. NB:- Drawing may be seen from the office of SSE/9A/KPA or Dy.CEE/KPA 54/10/6023 3170xxxx Motor switch Group Fiber – Glass case as 12 Nos. 25-Aug- 2010 B,IC,Q,DD, per KPA’s Drg. No. ER/KPA/EL GP,EE. TM. 1HE. 297 NB:- Drawing may be seen from the office of SSE/9A/KPA or Dy.CEE/KPA or SMM(D)/KPA. 54/10/6024 3100xxxx Brake Beam inner for 20 Ton Axle Bogie 40 Nos. 25-Aug- 2010 B,IC,Q,DD, 2389 fitted with Air Spring Suspension GP, RT, MP, Arrangement to ICF Drg No. DMU/DPC 5 – M. 3 – 2 – 505, Alt. ‘a’ NB:- Drawing may be seen from the office of SSE/10/KPA, DY. CEE/P&D/KPA or SMM(D)/KPA. 54/10/6025 2594xxxx Brush holder support assly. For TAO – 659 02 Nos. 25-Aug- 2010 B,IC,Q, 2351 TM as per drg No. 3TWD.092.210. DD,GP NB:- Drawing may be seen from the office of DY. CEE/KPA(SSE/9A/KA) or SMM(D)/KPA. 54/10/6026 7216xxxx Out side Micrometer with interchangeable anvils 02 Nos. 25-Aug- 2010 B,IC,M,Q, 7258 least Count=0.001mm Size=150mm to 300mm, DD,GP. (Digital model) Interchangeable anvils = 0,25,50, 75,100,125mm. Make = Mitutoyo, Tesa, Etalon. Cond: 1) Authorized dealership/Sub – dealership certificate issued by OEM of the quoted brand/ product to be attached with the quotation, otherwise the quotation will not be considered. Maker’s name and brand to be stated clearly. 2) Manufacture guarantee/Warranty certificate is to be attached alongwith the material. 3) List of spares with rate should be supplied free of cost along with the delivery of the material. 54/10/6027 2307 Sand ejector assly for WAG4/G5/G7 P4&P6 246 Nos 25-Aug- 2010 B,I,Q,DD, 6513 Loco KPA. Drg.No.ER/KPA/ELA/SL -373 GP, EE,MP. Alt -2 or Latest. NB:- Material to be supplied strictly as per drawing that may be seen from the office of DY. CEE(P&D)/KPA 54/10/6028 2598xxxx Set of cable code marker permacel instant lipical 04 Nos. 25-Aug- 2010 B,I,Q,DD, 2379 GC - 130 with different letters, width ¼ “ in 1¼” GP,EE,MP. x 300ft. rolls as per IS:7809 pt. – II(Latest) used in Locos as per CLW specn. No. CLW/ES/C – 5/C (Latest) consisting of:- 1)Cable code marker permacel instant lipical GC – 130 with letter k, L, M, N & O width ¼ “ in 1. ¼”x300Ft. Rolls as per IS:7809 Pt II (Latest) used in Locos Specn. As per CLW/ES/C –S/C(Latest) (2)Cable code marker permacel instant lipical GC – 130

Page 11: Bulletin 35

33

BULLETIN NO. 35 / 09 – 10

1 2 3 4 5 6

with letter P,Q,R,S & T width ¼ “ in 1. ¼” x300Ft. Rolls as per IS: 7809 pt. – II(latest) used in Locos. Specn. As per CLW/ES/C –S/C(Latest) (3) Cable code marker permacel instant lipical GC – 130 with letter U,V,W,X,& Y. width ¼ “ in 1. ¼” x300Ft. Rolls as per IS: 7809 Pt II (latest) used in Locos. Specn. as per CLW/ES/C –S/C(Latest) Quantity per set = 03 Rolls, one each of serial No. – 01,02

and 03.

54/10/6029 8501xxxx Ball Bearing 6312.C3 Make: FAG/SKF/NSK. 75 Nos. 25-Aug- 2010 B,IC,Q,DD, 8505 NB:-Valid D.C to be submitted alongwith offer GP,M. and material to be supplied in OEM’S original packing with OEM’S G – C. 54/10/6030 3171xxxx Fork as per ABB part No.2127 for Air Blast 50 Nos. 25-Aug- 2010 B,IC,Q, 2326 circuit Breaker (DJ) DD,GP

TENDER(S) OF DY.CMM. / JMP. (Delivery Place –Jamalpur) 55.10.5042 4030 Polyster Enamelled Round Copper Wire 131 Kgs. 23-Aug- 2010 A,B,IC,Q 4206 Class 130, Size 21, SWG 0.830mm dia to IS:- 13730 (Pt-34) 55.09.7772 - 300 x 90 x 8mm M.S.Channel Matl Specn. 3100 Kgs. 23-Aug- 2010 B,IC,DD 90-22 IS:80384, IS-226, ST-42

TENDER(S) OF SMM(D) / HWH (Delivery Place – Howrah) 581065311 5650 Relay ACI pluging Type style ‘QTA2 DC 54 Nos. 27-Aug-2010 B, C, IC, neutral track 9 ohums, 2 F/1B Q, DD, P front and back contact metal To Carbon, Complete with Plug board Retaining Clip & connector Conforming to BRS:939A BRS- 966( Appendix – F 2) IRS-S-34 & IRS-S-23 ( amdt. up to date as applicable) The interlocking code shall be FGHKX. 58106511 4390 Sealed Maintenance free battery, 12 Volt 45 Nos. 27-Aug-2010 B, C, IC, 17AH Capacity for use with UPS Exide/ Q,P,DD Amara Raja / similar. 581065091 4322 Rotary Compressor for 1.5 TR window 18 Nos. 27-Aug-2010 B, C, IC, AND SPLIT AC Make Siam or similar Q, RT,DD, P, 581065101 4390 Sealed Maintenance free battery, 12 30 Nos. 27-Aug-2010 B, C, IC, Volt 28 AH capacity for use with UPS Q, RT,DD, P, system Make EXIDE/AMARA RAJA/similar. 581065541 6228 Movable Road Barrier made of Iron Materials 28 Nos. 27-Aug-2010 B, C, IC, Specification 1) Pipe 1” & 2” made of Q,RT,DD, P, Galvanized iron make ‘ Jindal or similar 2) Wheel 04 Nos, made of iron with rubber casing. 3) Weight 85 Kgs. appx. or similar. 581065701 6704 Plastic pallets four face/ way entry single 25 Nos. 27-Aug-2010 B, C, IC, slot pallet without joint Size :- 1200 x Q, RT,DD, P, slot pallet without joint Size :- 1200 x 1000 x 150mm Static load 2.5 ton dynamic load – 1 ton .

Page 12: Bulletin 35

34

BULLETIN NO. 35 /09 – 10 1 2 3 4 5 6

511065351 5650 GREEN Aspect, main LED Signal 110V AC 14 Nos. 27-Aug-2010 B, C,IC, Retrofittable in existing C1S housing and RD, Q RT, compatible with AC LED ECRMC conventional DD, P. ECR.As per Specn No RDSO/SPN/153/2004 Rev-3.0(Draft) or The latest Amdt.

TENDER(S) of DMM / HWH (Delivery Place – Howrah) 61/10/6249 7206 Bolt Cutter size 36" Make Taparia / Jhalani. 15 Nos. 23-Aug-10 IC

7206

61/10/6248 7290 Single sleeve fibre pulley block(Snatch block 100 Nos. 23-Aug-10 IC 7290 pulley) Make: IM / IEP.

61/10/6247 5290 Signal line Cordless Phone, Model-KX-TG3611BX 30 Nos. 23-Aug-10 IC Make: Panasonic or Similar. (Specification attached) 61/10/6254 7890 Two Fold Stretcher (Iron Frame) Size: 78” x 20”. 75 Nos. 23-Aug-10 IC

7890 61/10/6268 79 Spl Driver Kids Bag, Size: 16” x 12” x 6” (1616 Canon 325 Nos. 23-Aug-10 IC

79 Spl Mattichocolate colour. 2 Inch Runner- SQ Runner special hock with same bit- with soldier.).

61/10/6269 4398 Belt Tensioning device spring stifness checking 02 Nos. 23-Aug-10 IC

4398 machine for 25 KW alternate (Make: Presstech /SIL/KEL). 61/10/6270 4702 Portable single phase 220 V 50 HZ, Petrol Start 02 Nos. 23-Aug-10 IC

4702 Kerosene run AC. Generating Set Rated VA out put at unit Pf : 1400, starting type : Recoil, AC/DC, output : AC/12V, 6Amp. Min DC etc, similar to model no.EXK-2000 of HONDA make.

61/10/6267 90Spl Steel Cabinet Containing 10 lockers per cabinet Size: 10 Nos. 23-Aug-10 IC 90Spl 78” H x 39” W x 19” D CRC sheet, 20 Gauge, Front

door panel 18 SWG CRC sheet.

61/09/6800 4601 S.S. Stud Bolt Size: - 16 x 30 x30 mm with lock nut. 150 Nos. 23-Aug-10 IC 4601 Make: Core approves suppliers.

61/08/6635 4601 Clamp for crossing switches DC item No. 61. As per 80 Nos. 23-Aug-10 IC 4601 DRG No. ETI/OHE/DC/P/614/2008 (Drawing to be seen at Consignee or DMM/HWH Purchase Section.) 61/10/6271 4619 Rail jumper assembly with clamps. (Ai. Bronze, as per 18 Nos. 23-Aug-10 IC 4619 IS: 3091/1965) at both ends along with 10 meter long copper cable PVC/Rubber as per Drg. No.-RE/33/P/500. 61/10/9000. Gr.47. High rupturing capacity 160 Amps. Fuse link with blade 300 Nos. 25-Aug-10 CI, B, Q, Sub.Gr.32 contact, DIN type, 415 volt, 50 HZ, breaking capacity- M, DD. 80KA., Cat No. ISHCD00160, type SB00 of STANDARD GP. make. C0nforming to IS: 13703.(Make-M/S. STANDARD

/ L & T / HAVELLS/SIEMENS).

Page 13: Bulletin 35

35

61/10/9001 Gr.42. Heavy duty metal Plug & Socket type ‘ D S’- 5 pin (with 02. Items 25-Aug-10 CI, B, Q, Sub.Gr.01 integral switching device) as per list attached. (Make- M/s. Each. M, DD

BCH electric ltd./ HAVELLS/ LEGRAND). GP. 61/10/9002 Gr.65 HYDRAULIC JACK 10 TON CAPACITY . 07 Nos. 25-Aug-10 CI, B, Q, Sub.Gr.50 ( Detail Particulars attached) Each. M, DD

GP.

BULLETIN NO. 35 /09 – 10 1 2 3 4 5 6

61/10/9003. Gr.47. High rupturing capacity 250 Amps. Fuse link with 300 Nos. 25-Aug-10 CI, B, Q, Sub.Gr.32 blade contact size-1, Breaking Capacity 80 KA.AC Each M, DD

(MIN) suitable for rated voltage 415 volt AC and GP. Conforming to IS :13703( Pt 1 & 2) Cat No. HCD01250, of HAVELLS make. (Make-M/S. HAVELLS/ L & T / SIEMENS/ STANDARD) 61/10/9004 Gr.33 Sealed Window glassFor emergency Window 50 Nos. 25-Aug-10 CI, B, Q, Sub.Gr.32 Size :- 1119 X 699 X 18.38mm. Each M, DD

GP. 61/10/9005. Gr.47. Different Capacities of ‘ D C ’series Miniature Circuit 06 Item. 25-Aug-10 CI, B, Q, Sub.Gr.30 Breaker.(Make-M/s. HAVELLS/ BCH / STANDARD / Each M, DD

MDS )As per list attached.(Individual rate to be quoted for GP. each single item, But total value of lowest offerer to be accepted.) 61/10/9006 Gr.33. Pneumatic Pipe with Ermeto Connection 18 –L. As per 200 Nos. 25-Aug-10 CI, B, Q, Sub.Gr.50 OEM / ALSTOM Drg.No. 1272160. Brand – SONI / Each M, DD

POWERTRAK. GP. 61/09/9023 Gr.65. STAIR CLEANER.(As per Specification attached) 02 Nos. 25-Aug-10 CI, B, Q RT. Sub.Gr.90 Each M, DD

GP.

TENDER(S) OF AMM / C&W / TKPR (Delivery Place -Tikiapara) 61/10/9006 3350 Pneumetic Pipe with Ermeto Conection 18 - L . As per 200 Nos. 25-Aug-10 CI , BQ, OEM / ALSTOM. Drg. No. 1272160. Brand - SONI M, DD, / POWERTRAK. GP. 61/10/9007 6703 4 Wheeler box trolley of sizes 2 1/4' (ft.) width X 4' (ft.) 4 Nos. 25-Aug-10 CI , BQ,

length. Having push & pull arangement. Best quality nylon M, DD, wheel of 6" (inch) X 2" (inch) to be fitted inside the box . GP.

Capacity - 750 KG.

61/10/9008 6590 WELDING SET. ( Specification as per annexure.) 2 Nos. 25-Aug-10 CI , BQ, M, DD, GP. 61/10/9009 6590 FLOOR SCRUBBER. As per Model No. W34N of 2 Nos. 25-Aug-10 CI , BQ,

Roots multiclean Limiteds. or Similar. M, DD, ( Specification as per annexure.) GP.

61/10/9010 4730 Miniature circuit breaker 63 Amp. Four pole, ' C ' series 40 Nos. 25-Aug-10 CI , BQ, 41 5volts, 50HZ, type S 274 – C 63 of make ABB, M, DD, Breaking capacity – 10 KA. And as per IEC 60898 GP. & IS 8828. ( Make- ABB / HAVELLS / STANDARD ).

61/10/9011 4308 LCD portable digital multi stem Thermometer with external 150 Nos. 25-Aug-10 CI , BQ, sensing probe. Rang -50º C to + 150ºC or -58º F to + 302º F M, DD, ( Make - MEXTECH / METRAVI ) GP.

61/09/9023 6590 STAIR CLEANER. (Specification as per annexure.) 2 Nos. 25-Aug-10 CI , BQ, RT M, DD GP.

Page 14: Bulletin 35

36

TENDER(S) OF AMM/TRS/CS/HWH (Delivery Place – Howrah)

61/10/9508 --- Double Ferule Union & Elbow as per attached description As per 25-Aug-10 B/C/M/ 62.33 and specification. annexure D.D/ IC/GP 61/10/9509 --- Double Ferule “Tee” joints as per attached description As per 25-Aug-10 B/C/M/ 62.33 and specification: annexure DD/IC/GP

BULLETIN NO. 35 /09 – 10 1 2 3 4 5 6

61/10/9510 --- Double Ferule Connectors as per attached description As per 25-Aug-10 B/C/M/ 62.33 and specification: annexure D.D./

IC/GP

61/10/9512 --- Electric Arc Welding Machine Portable Type as per 04 Nos. 25-Aug-10 B/C/M/ 76.25 attached Specification D.D./

IC/GP

61/10/9516 --- Modified Glass Shutter Assembly. Fixed & Movable 1-25 Nos 25-Aug-10 B/C/M/ 31.53 with Lock assembly as per Sr.DEE/TRS/HWH 2-25 Nos D.D./ Drg.No.ET/RS-15/712. Drg. to be seen at the office of IC/GP Sr.S.E.TRS/CS/HWH.

61/10/9517 --- 1.Color Cartridge of H.P.Laser Jet Printer CP 1515N. As per 25-Aug-10 B/C/M/ 83.90 2.Colour Cartridge of H.P.Laser Jet Printer HP 1505N annexure D.D/ As per attached description specification. IC/GP

61/09/9518 --- Supply and painting of polybutadyne styrene based infrared 200 Ltrs. 25-Aug-10 B/C/M/ 77.11 rays reflection compound. Reflection should be 95% with D.D/ propylene gycel 9% Wt/Volume. Brand-Solacoat. IC/GP Make:MBM Projects & Services or Linex Incorporation. 61/09/9523 --- Low less power capacitor 250 µFD, 500 A.C. IS:13585 5 Nos. 25-Aug-10 B/C/M/

31.00 (Part-1)1994. Impregnant-NPCB.Fuse internal. Frequency D.D/ 50Hz.Physical dimension: Length 240 mm (Approx) Height IC/GP 270 mm (Approx) Width 110 mm (Approx). Provided with fixing clamp on both side at the bottom of the capacitor. Make: Sunny/ Meher/Malde.

N.B: Since there is no system of receipt note for items delivered against this Division Purchase Order. 100% payment will be made against I/C & R/C after receipt of materials by consignee and no other terms will be accepted . Payment will be made through Sr.DFM /HWH / E.Rly.

TENDER(S) OF: AMM/TRS/ELS/HWH (Delivery Place – Howrah) 61/10/8003 7405. Two leg wire rope sling with main ring& intermediate 04 Nos. 25-Aug-10 IC ring at either end as per TRS/ELS Drg. No.TRS/HWH

/EL-372/06 ( Capacity HWH/EROf sling-6.2Ton SWL in each leg ) each sling should be tested by N.T.H

or any other Central Govt. Test House. Test marks should be punched On suitable surface on each sling.

NB: i) Material to be supplied directly to the consignee, ii) Drawing must be followed and to be seen at SrSE/STORE/TRS/ELS/HWH/E.RLY. iii) Firm should submit TC from N.T.H or any Central Govt. Test House at the time of inspection and supply. iv) Firm should submit GC as per IRS conditions of contract. v) Firm should provide identification mark at a suitable place on the product. vi) Other terms & conditions as per IRS conditions of contract. 61/10/8007 2598 Bolster Friction Device as per 32 Nos. 25-Aug-10 EE, IC Drg. No.29.04.06 Ref.-1 NB: i) Only CEE’s approved firms to be entertained ii) Material to be supplied directly to the consignee, iii) Drawing must be followed and to be seen at SrSE/STORE/TRS/ELS/HWH/E.RLY. iv) Other terms & conditions as per IRS conditions of contract. 61/10/8009 25985553 Brush Holder Assembly for Traction Motor 30 Nos. 25-Aug-10 EE,RD,IC

No.2TWD.095.090

Page 15: Bulletin 35

37

NB: i) Only RDSO’s and CEE’s approved firms to be entertained ii) Material to be supplied directly to the consignee, iii) Drawing must be followed and to be seen at SrSE/STORE/TRS/ELS/HWH/E.RLY. iv) Manufacturer’s identification mark should be provided on the material. v) Other terms & conditions as per IRS conditions of contract. 61/10/8012 2598 Fixing arrangement of front lookout glass & 20 sets. 25-Aug-10 EE, IC Details as per Drg. No.TRS/HWH/TRS/ELS EL-470/09 NB: i) Only CEE’s approved firms to be entertained ii) Material to be supplied directly to the consignee, iii) Drawing must be followed and to be seen at SrSE/STORE/TRS/ELS/HWH/E.RLY. iv) One set advance sample to be approved by the consignee before bulk manufacture v) Other terms & conditions as per IRS conditions of contract.

BULLETIN NO. 35 /09 – 10 1 2 3 4 5 6

61/10/8013 2598 Spring for Bolster Friction Device as per 200 Nos. 25-Aug-10 EE, IC Drg. No.29.04.06 Ref. No.-2 NB: i) Only CEE’s approved firms to be entertained ii) Material to be supplied directly to the consignee, iii) Drawing must be followed and to be seen at SrSE/STORE/TRS/ELS/HWH/E.RLY. iv) Other terms & conditions as per IRS conditions of contract. 61/10/8015 6590 Hydraulic system for shortening & releasing of draft 01 set 25-Aug-10 IC gear for different Loco as per Specification attached Make: LARZEP or Similar.

NB: i) Material to be supplied directly to the consignee, ii) Specification should be followed, iii) Other terms & conditions as per IRS conditions of contract. 61/10/8016 6590 Plain Ram Bottle type Hydraulic Jack Capacity-02T, 04 Nos. 25-Aug-10 IC Closed Height-190mm, Hydraulic Lift-120mm, extra screw-75mm Total extended height-385mm, Ram dia-30mm Body dia-65mm, Base-120mmX120mm, Approx weight-05kgs,Make: LARZEP, DBXT or VANCOS. NB: i) Material to be supplied directly to the consignee, ii) Other terms & conditions as per IRS conditions of contract. 61/10/8017 6590 Plain Ram Bottle type Hydraulic Jack Capacity-30Ton, 02 Nos. 25-Aug-10 IC closed height-270mm, Hydraulic Lift-150mm, Ram dia-80mm, Body dia-150mm, Base-200mmX200mm, Approx weight-25kgs,Make: LARZEP, DBXT or VANCOS. NB: i) Material to be supplied directly to the consignee, ii) Other terms & conditions as per IRS conditions of contract.

61/10/8018 6590 Single acting spring return Hydraulic Jack Capacity-10To 02 Nos. 25-Aug-10 IC Weight Maximum-04kgs, Oil Cap.-64cm³, Closed Height 89mm,Model-SMP01004 of LARZEP or Similar Make:LARZEP, DBXT or VANCOS. NB: i) Material to be supplied directly to the consignee, ii) Other terms & conditions as per IRS conditions of contract. 61/10/8019 7815 Steel Tool Cup Board ( 12 Cup board of equal sizes ) 08 Nos. 25-Aug-10 IC as per drg. No.TRS/HWH/ EL-367/06. NB: i) Material to be supplied directly to the consignee, ii) Manufacturer’s identification mark, month & year should be provided on the material iii) Drawing must be followed and to be seen at Sr.SE/STORE/TRS/ELS/ER/HWH iv) Other terms & conditions as per IRS conditions of contract. 61/10/8020 7815 Stacking Rack of five equal shelves with provision of Door 06 Nos. 25-Aug-10 IC and Lock as per drg. No. TRS/HWH/EL-368/06. NB: i) Material to be supplied directly to the consignee, ii) Manufacturer’s identification mark, month & year should be provided on the material iii) Drawing must be followed and to be seen at Sr.SE/STORE/TRS/ELS/ER/HWH iv) Other terms & conditions as per IRS conditions of contract.

MANUAL TENDER OF HQ. (AS A SPECIAL CASE ).

BULLETIN NO. M-35/09-10 CASE NO. 07-08-1082. & 07- 08 -1088. 07/08/1082 9311 Aluminium Flat Moulding (anodized), Size- 1923.322 kgs. 20.08.10 91983022 30mm X 2mm X 3660mm as per Sk. No. LLH-25/80, Item-8,Alt.11, To be dull anodized as per IS:1868/82, Table-1,Gr.AC-25,Material Specification Aluminium IS: 733/83, condition

Page 16: Bulletin 35

38

63400 W.P., Each strip is to be covered with

PVC protection tape during supply.

BULLETIN NO. 35 /09 – 10 1 2 3 4 5 6

TERMS - Inspection will be done by RITES at the premises of manufacturer or their authorized dealer godown prior to dispatch. No other inspection is acceptable. Offer with any other inspection clause will be summarily rejected. 2) Material will be procured from manufacturer / traders having with dealership certificate of manufacturer. Tenderers are required to quote along with manufacturer name and raw material sources name in the tender failing which the offer will be summarily rejected without any back reference 3) firm has to submit documentary evidence for the sources of material procurement at the time of RITES inspection & supply. 4) PVC, if quoted should be clear and complete with clear base date, base rate, formula for PVC calculation. In case of unclear PVC offer is liable to be rejected. Also the attested documentaryevidence for base date/base rate of PVC is to be submitted along with the offer, for PVC calculation purpose.5) anodizing sources name / address is also to be indicated in the offer, failing which offer will be rejected without any back reference. 6) Delivery after 01/08/2010 but within 31/09/2010 7) material to be delivered at DY.CMM/LLH N.B (only manual offer will be accepted)

07/08/1088 9311 Aluminium Flat Moulding , Size-50mm X 2770.263 kgs 20.08.10 91983162 2.5mmX 3660mm as per Sk. No.LLH-25/80, Item-20, Alt.-11, To be dull anodized, as per IS:1868/82, Table-1, Gr. AC-25, Material Specn aluminium IS: 733/83, Condition 63400 W.P., Each strip is to be covered with PVC protection tape during supply.

TERMS - 1) Inspection will be done by RITES at the premises of manufacturer or their authorized dealer godown prior to dispatch. No other inspection is acceptable. Offer with any other inspection clause will be summarily rejected. 2) Material will be procured from manufacturer /traders having with dealership certificate of manufacturer. Tenderers are required to quote along with manufacturer name and raw material sources name in the tender failing which the offer will be summarily rejected without any back reference 3) firm has to submit documentary evidence for the sources of material procurement at the time of RITES inspection & supply. 4) PVC, if quoted should be clear and complete with clear base date, base rate, formula for PVC calculation. In case of unclear PVC offer is liable to be rejected. Also the attested documentary evidence for base date/base rate of PVC is to be submitted along with the offer, for PVC calculation purpose.5) anodizing sources name / address is also to be indicated in the offer, failing which offer will be rejected without any back reference. 6) Delivery after 01/08/2010 but within 31/09/2010 7) material to be delivered at DY.CMM/LLH N.B (only manual offer will be accepted)

CORRIGENDUM

1. B.T. No.: 33/09-10, Opened on 16.07.10, T.C.No. 52/09/6323, 52/10/6012, 52/10/6014, 52/10/6016, 52/10/6026, 52/10/6027, 52/10/6034, 52/10/6042,

52/10/6069, 52/10/6070, 52/10/6075 & 52/10/6079 are hereby withdrawn. 2. B.T. No.: 33/09-10, Opened on 16.07.10, T.C.No. 52/09/6443 abbreviation to be read as “B,IC,Q, MP,MTC Req” instead of existing entry. 3. B.T. No.: 33/09-10, Opened on 16.07.10, T.C.No. 52/10/6040 abbreviation to be read as “B,IC,M,Q,GP,C” instead of existing entry.

4. B.T. No.: 33/09-10, Opened on 16.07.10, Annexure to be read following Tenders :-

Annexure for T.C. No. 52.09.6433

Sl. Description Quantity

Page 17: Bulletin 35

39

1. Battery charger suitable for 120AH cell for TL Coaches as per RDSO`s specn. No.

RDSO/PE/SPEC/AC/0008(Rev-1)` Aug`2004 with latest revisions. Marked as

“ACTUAL” type constant valtage and constant current with current limiting

normal input voltage 415V, AC 3 Phase, 4 Wire systems, operatig voltage range

350V to 480V AC,50 HZ DC output voltage 155 volt, output voltage variation –

40V to 155V DC, output current 0 – 25 Amp and with

a) 100 Amp MCCB Similar to Siemens cat No.:3VL2710 – 1AB36 OAAO with all

accessories.

b) Supply of cable PVC insulated AI XLPE 1100V grade 4 Core armoured cable

50 mm2 and with installation.

01 No.

01 No. 25 M

Annexure for T.C. No. 52.09.6443 Portable type non-clog submersible sewage pump Motor set, similar to MBH make model No. 4 NSC 5.0S4A,CAPACITY-120 CU.m/hr (26400 GPH ) head5mtrs, soft solid handling size- 80 mm, Motor- H.P/kw-5 H.P/3.75 KW,3 Ø, 415 V,50HZ motor spec.-double Mechanical seal with Moisture sensor and Thermostat protection delivery size 100 mm, speed-1450r.p.m, method of starting.DOL instalation class-F, sealing type(lower) SicsSteel cable size 1x7x1.5 Sq. mm water & Oil proof PVC Insulated Double Sheathed Copper conductor MAKE- MBH/ KIRLOSKAR/KSB

Annexure for T.C. No. 52.10.6057

Annexure for T.C. No. 52.10.6060

Detailes description as under

Insulation resistance & Earth leakage monitor similar to ABB Make type monitoring insulation resistance in single phase AC system & 3 phase AC system upto 793 Volts with following specifications:

V.AC, 230 Rated switching current (IEC – 60947-5-1) at AC-15 (inductive) @ 230V:2 amps, Frequency : 50 – 400 HZ, No. of output contact:2C/O, operating temparature range: -10 degree centrigrade to 55degree centrigrade.

Annexure for T.C. No. 52.10.6061

Detailes description as under :-

Insulation resistance monitor similar to ABB Make type –CM- 1WN – AC for monitoring insulation resistance in singAC system & the device will monitor the insulation resistance between under ground AC supply voltage & protective earth conductors conforming to IECwith following specification rated supply voltage: 220-240 V.AC, Rated switching current (IEC – 60947-5-1) at AC-15 (inductive) @ 230V:3 amps, Rated frequency : 50 – 60 HZ, No. of output contact:- 1C/O, operating temparature range: -25°C to +65°C.

Annexure for T.C. No. 52.10.6062

Detailes description as under;-

Sl. Description Make Qty.

1 Single Row Deep groove ball bearing No. 6210 . 2RS.

SKF/FAG/ARB 04 Nos.

2 Single Row Deep groove ball bearing No. 6314 SKF/FAG/ARB 04 Nos.

3 Single Row Deep groove ball bearing No. 6315 SKF/FAG/ARB 04 Nos.

4 Single Row Thrust ball bearing No. 51317 SKF/FAG 06 Nos.

Page 18: Bulletin 35

40

Multi functional 3 phase monitoring relay similar to ABB Make type CM-MPS for monitoring Three phase supply voltages for incorrect phase sequency, phase lose, phes unbalance as well as over voltage & under voltage conforming to IEC-255-6,EN60255-6 with following spevoltage: 300-500 V.AC, Rated switching current IEC – 60947-5-1) at AC15 (inductive) @ 230V:3 amps, Rated frequency : 50/60 HZ, Rated switching voltage (IEC 947-1) : 250V, No. of output contact:- 2C/O, operating temparature range: -20°C to +60°C.

CORRIGENDUM

Tender No. 06/10/5644.

Tender Type. Bulletin-34/09-10

Due on 21/07/10

This office tender No. 06/10/5644 due on 21/07/10 against B.T. .No. 34/09-10 for procurement of 1800 Nos. Ink Black for gestetner

CORRIGENDUM

Tender No. 06/10/5647.

Tender Type. Bulletin-34/09-10

Due on 21/07/10

This office tender No. 06/10/5647 due on 21/07/10 against B.T. .No. 34/09-10 for procurement of 350 Nos. Ink printing letter etc.

CORRIGENDUM TC No.14.10.6132 Tender No.14.10.6132 against B.T. No. 34 due on 23.7.2010. The quantity to be read as 157 Nos. instead of 100 Nos. Other terms and conditions will remain unchanged.

Page 19: Bulletin 35

41

Annexure for T.C. No. 52.09.6304

Specification

Dimension 590mm x 330mm x 200mm. Rated heat output 21 KW Hot Water flow rate @ 25 degree C, Temp. rise 10L/min. Power 2 Nos. Dry Batteries, Gas type & Pressure LPG 2800 Pa Natural Gas 2000 Pa Water pressure Min. 0.3 Kg/cm2 (5 PSI) and Max 5 Kg/cm2 (75 PSI) Ignition :- Water controlled automatic Ignition. Safety devices :- Over heating protection, Flameout Protection, 20 minute off time protection. Pressure release Valve.

Features

Provision for duct to exhaust flue gases. Powder coated outer body copper heat exchanger and stainless steel burners, 3-way temperature control for both summer and winter, wide range of temperature.

Accessories

1) 1.2 meter armoured gas pipe. 2) Cold water pipe with suitable connector for geyser and existing water pipe. 3) Flexible hot water pipe to sustain boiling water and suitable connector at both end. 4) D Size of 650 mili amp. 1.5 Volt battery – 2 Nos. 5) Pipe Clamp ring to match the armoured gas pipe – 2 Nos. 6) Stopcock – 1 No.

Annexure for T.C. No. 52.10.6093

Quantity:- 180 Coach set (Non AC = 160 & AC = 20)

Sl. No.

Description Qty./ Coach set

1 20 mm Moving flange with socket as per Drg.No. CC-35316 Alt.c & CC 35317 Alt.b PL- 36981515

02 Nos.

2 Fixed Flange for 20 mm pipe as per RDSO SK-85187 item 1, Alt. 2

01 Nos.

3 Pipe with Moving Flange & Socket as per item No. 18 of Drg.No. – LLH-39/99 Alt. 1

02 Nos.

Annexure for T.C. No. 52.10.6094

Page 20: Bulletin 35

42

Quantity:- 180 Coach set (Non AC = 160 & AC = 20)

Sl. No.

Description Qty./ Coach set

1 Tee 15 mm, Drg. No. DC/EMU 3-5-032, item- 26, Alt. L 04 Nos.

2 Elbow M & F 15 mm, Drg.No. DC/EMU 3-5-032, item- 41, Alt.L 02 Nos.

3 Hex nipple 15 mm Heavy Duty, Drg. No.- DC/EMU 3-5-032, item- 19, Alt. L

12 Nos.

4 Dummy Plug 15 mm, Drg. No.- DC/EMU 3-5-032, item- 38, Alt.L 02 Nos.

Annexure for T.C. No. 52.10.6096

Punch Dia : 3.2 mm Wattage :660W approx. Stroke Minute :1300 approx. Cutting Capacity : S.S. Steel – 3.2 mm. Aluminium – 3.5 mm. Net Weight : 3.4 Kgs. Approx. Each Machine to be supplied with 01 No. Nibbler punch with Machine & 01 No. Nibbler punch extra and 6 mtrs. Of supply cable with 3 pin top. Make / Brand : BOSCH (SKILL)/MAKITA/HITACHI

Annexure for T.C. No. 52.10.6113

i) Indication for emergency window to Drg.No. LLH/SK – 53/2002, Item 9, Alt-2(2 Nos. per Kit) ii) Notice for emergency window to Drg.No.LLH/SK – 53/2002, Item – 2, Alt - 2(2 Nos. per Kit) iii) Notice for hammer to break glass to Drg.No.LLH/SK–53/2002, Item – 3, Alt - 2(2 Nos. per Kit) iv) Indication notice for Alarm to Drg.No.LLH/SK – 53/2002, Item – 5 Alt - 2(3 Nos. per Kit) v) Indication for operation & sequence to Drg.No.LLH/SK – 53/2002, Item – 10, Alt - 2(2 Nos. per Kit)

Annexure for T.C. No. 52.10.6119

Quantity:- 180 Coach set (Non AC = 160 & AC = 20)

Sl. No.

Description Qty./ Coach set

1 Isolating cock with vent for Brake Cylinder RDSO Sk.No. 98013, Alt. latest PL- 30983423

02 Nos.

2 Sealing Ring Ø 20 mm pipe CC 35318 Alt. Latest PI- 3098732 10 Nos.

Page 21: Bulletin 35

43

Annexure for T.C. No. 61.10.9001

List of Heavy duty metal Plug & Socket type ‘ D S ’ – 5 pin. ( with integral switching device ) ( Make-M/s. BCH electric ltd. / HAVELLS / LEGRAND )

SL.No. Description

Quantity

1 Heavy duty metal Plug 63 Amp.415 V. 5 Pin , type ‘ D S ’, Cat No. –DS6A7A1 of BCH make. ( Make-M/s. BCH electric ltd./ HAVELLS / LEGRAND )

15 Nos.

2 Heavy duty metal Socket 63 Amp.415 V. 5 Pin , type ‘ DS ’, Cat No. –DS6B7A1 of BCH make. ( Make-M/s. BCH electric ltd./ HAVELLS / LEGRAND )

15 Nos.

NOTE:- Individual rate to be quoted for each single item, But total value of lowest offerer to be Accepted .

Annexure for T.C. No. 61.10.9002

Specification of HYDRAULIC JACK ( 10 TON CAPACITY ) i ) Capacity - 10 Ton. ii ) Type - SP-SR-10-300. iii ) Closed height - 600MM. iv ) Hydraulic Lift - 300mm. v ) Total extend height - 900mm. vi ) Ram Dia - 46 to 50mm. vii ) Body Dia - 100mm (Approx) viii ) Base size - 160 x 160mm (Approx)

Annexure for T.C. No. 61.10.9005

List of different Capacities of ‘ D C ’ series Miniature Circuit Breaker. ( Make – M/s. HAVELLS/BCH/STANDARD/ MDS )

Sl.No. Description Quantity 1 MCB single pole 2 Amp. 130 volt DC.

(Make- M/s. HAVELLS / BCH / STANDARD / MDS) 50 Nos.

2 MCB single pole 4 Amp. 130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD / MDS )

50 Nos.

Page 22: Bulletin 35

44

3 MCB single pole 6 Amp. 130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD / MDS )

50 Nos.

4 MCB single pole 10 Amp.130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD / MDS )

100 Nos.

5 MCB single pole 20 Amp. 130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD / MDS )

50 Nos.

6 MCB single pole 40 Amp. 130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD / MDS )

50 Nos.

NOTE:- Individual rate to be quoted for each single item, But total value of lowest offerer to be accepted.

Annexure for T.C. No. 61.10.9008

Technical Specification

Sl.No. Description Technical Details Technical Parameters

1 Input Supply 3 Phase , 415 V , 50 Hz

2 Type Thyristerized Type

3 Input Current 25 – 27 AMPS

4 Weld. Current Range 30 – 400 A

5 Open Circuit Voltage 90 – 100 V

6 Rated Power 18 – 22 K VA

7 Rated Current at 60 % duty Cycle 300 – 400 A

8 Insulation Class H

9 Protection IP – 23

10 Cooling Forced Air

11 Weight in Kg 200 ( maximum )

Annexure for T.C. No. 61.10.9009 Specification of FLOOR SCRUBBER

DESCRIPTION TECHNICAL PARAMETERS

Working width (mm) 400

Working height (mm) 110 / 170

Dimensions ( 1x w x h ) in mm 620 x 510 x 360

Motor rating max. ( W ) 1600

Weight ( Kg ) 30

Brush speed ( U / min ) 1080

Performance ( m2 / h ) 450

Power supply (~ / v / Hz ) 230 / 50

Annexure for T.C. No. 61.09.9023 RT.

Page 23: Bulletin 35

45

Specification of STAIR CLEANER

DESCRIPTION TECHNICAL PARAMETERS

Working width, brush ( mm ) 170 / 200

Dimensions ( I x w x h ) in mm 360 X 180 / 200 X 330

Brush motor ( W ) 120

Weight ( Kg ) 05

Brushspeed , sweeping / washing ( U/min ) 0 - 470

Annexure for T.C. No. 61.10.6247 Specification for Single line Cordless Phone. Frequency : 2.4 GHz Specific Channel numbers: 90 Channels Number of Lines: 1 Line Security Code: Over 1.0 million Codes Power Source Base Unit AC adapter Handset Ni-MH battery Battery Charger AC adapter Phone Book and caller ID In- Built and capable of storing 50 Nos. Display Should be illuminated

Annexure for detailed description and specification of

T.C.No.61/10/9508,61/10/9509&61/10/9510.

Annexure for T.C.No.61/10/9508

No.1.Union 1” OD. 20 Nos.

No.2.Union ¾” OD. 30 Nos.

No.3.Union 1 ½” OD. 20 Nos.

No.4. Equal Elbow 1” OD. 30 Nos.

No.5. Equal Elbow ¾” OD. 3o Nos.

No.6. Reducing Elbow 1″ BSPT x ¾” BSPT(M). 20 Nos.

Annexure for T.C.No.61/10/9509

1. Male Run Tee - 1” OD x ¾” BSPT(M). 20 Nos.

2. Male Run Tee- 3/4″ OD x ½” BSPT(M). 20 Nos.

3. Male Brunch Tee- 1” OD x 1” BSPT(M). 20 Nos.

4. Male Brunch Tee - 1” OD x ¾” BSPT(M). 20 Nos.

5. Male Brunch Tee - ¾” OD x ½” BSPT(M). 20 Nos.

Page 24: Bulletin 35

46

6. Male Brunch Tee -1 ½” OD x 1” BSPT(M). 10 Nos.

7. Female Run Tee-1” OD x ¾” BSPT(F). 10 Nos.

8. Female Run Tee - ¾ ” OD x ½ ” BSPT(F). 10 Nos.

9. Female Brunch Tee - 1” OD x ¾” BSPT(F). 10 Nos.

10.Female Brunch Tee - ¾ ” OD x ½ ” BSPT(F). 10 Nos.

Annexure for T.C.No.61/10/9510

No.1 Male Elbow Connector-1″ OD x ¾″ BSPT(M). 30 Nos.

No.2 Male Elbow Connector-1″ OD x 1″ BSPT(M). 10 Nos.

No.3 Male Elbow Connector- ¾″ OD x ½″ BSPT(M). 20 Nos.

No.4 Male Elbow Connector- 1½″ OD x 1″ BSPT(M). 10 Nos.

No.5 Female Elbow Connector- 1″ OD x ¾″ BSPT(F). 15 Nos.

No.6 Female Elbow Connector- ¾″ OD x ½″ BSPT(F). 15 Nos.

No.7 Male Connector-1″ OD x ¾″ BSPT(M). 30 Nos

No.8 Male Connector- ¾″ OD x ½″ BSPT(M). 30 Nos

• Individual Rate to be quoted for each item but total value of lowest offerer to be accepted.

Specification:- The fittings shall be of Double ferrule type consisting primarily of Body, Front ferrule, Back ferrule and Nut. The Body & Nut shall be of Carbon steel to ASTM A 108 Grade – II and ASTM A 105 Grade – I (Forging) respectively. The Body & Nut shall be electroplated by Zinc Cobalt Alloy as per ASTM B -840-99 to new ASTM Grade 18 and yellow chromated (type-B) or any superior electroplating process may be adopted with the approval of purchaser. The front Ferrule and Back ferrule shall be of Stainless steel to spec. ASTM A 276 TP 316. The Hardness of Front ferrule should be 85 to 90 HRB. The Back ferrule shall be case hardened to a depth of 27 microns (minimum) through suitable case hardening process to achieve a minimum hardness of 1000 Vickers point number HV (0.05). The Back ferrule shall successfully complete Intra-Granular corrosion test to ASTM A 262, Practice A and E, after case hardening. The thread of Body & Nut should be 20 TPI. The manufacturer’s name, Description & Size should be embossed on Nut and back Ferrule of each items.

Annexure for specification of T.C.No.61/10/9512. 1. Rated Input Voltage-380/415/440VA.C- 2 Lines of 3ph.50 Hz. 2. Rated Input - 33 KVA 3. OCV (max) - 82 V. 4. Welding Current Range- 60-450 Amps. 5. Max. Welding Current (35%) - 450 Amps. 6. Max.Hand Welding Current (60%) - 400 Amps. 7. Max.Automatic (Welding Current 100%)- 310 Amps.

8. Type of Regulation - Stepless. 9. Insulation - Class-H. 10. Type of Cooling - Forced Air. 11. Weight - As portable, the weight should be within 75 Kgs. to 50 Kgs. 12. To be provided with wheels for easy movement.

13. Make: L&T or Surarc.

Annexure for description and specification of T.C.No.61/10/9517. 1.Colour Cartridge of H.P.Laser Jet Printer CP 1515N. i) Black CB 540A. 6 Nos. ii) Blue CB 541A. 2 Nos. iii) Yellow CB 542A. 2 Nos. iv) Red CB 543A. 2 Nos.

2.Colour Cartridge of H.P.Laser Jet Printer HP 1505N. i)Black CB 436A/36A. 6 Nos.

Page 25: Bulletin 35

47

* Individual Rate to be quoted for each item but total value of lowest offerer to be accepted.

TENDER SCHEDULE

T.C. No. 61/10/9005. Dtd. 20.5.2010. List of different Capacities of ‘ D C ’ series Miniature Circuit Breaker. ( Make – M/s. HAVELLS / BCH / STANDARD / MDS )

Sl.No. Description of Materials Quantity Rate each

1 MCB single pole 2 Amp. 130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD/ MDS )

50 Nos.

2 MCB single pole 4 Amp. 130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD/ MDS )

50 Nos.

3 MCB single pole 6 Amp. 130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD/ MDS )

50 Nos.

4 MCB single pole 10 Amp.130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD/ MDS )

100 Nos.

5 MCB single pole 20 Amp.130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD/ MDS )

50 Nos.

6 MCB single pole 40 Amp.130 volt DC. (Make- M/s. HAVELLS / BCH / STANDARD/ MDS )

50 Nos.

TENDER SCHEDULE

T.C.No. 61/10/9001. Dtd. 20.05.2010. List Heavy duty metal Plug & Socket type ‘ D S’- 5 pin (with integral switching device) (Make- M/s. BCH electric ltd./ HAVELLS/ LEGRAND)

SL.No. Description of Materials & Cat No. Quantity Rate Each

1 Heavy duty metal Plug 63 Amp. 415 V. 5 Pin , type ‘D S’, Cat. No. –D S 6 A 7 A 1 of BCH make. (Make- M/s. BCH electric ltd./ HAVELLS/ LEGRAND)

15 Nos.

2 Heavy duty metal Socket 63 Amp. 415 V. 5 Pin , type ‘D S’, Cat. No. –D S 6 B 7 A 1 of BCH make. (Make- M/s. BCH electric ltd./ HAVELLS/ LEGRAND)

15 Nos.

TENDER SCHEDULE

Page 26: Bulletin 35

48

T.C. No. 61/10/9002. Dtd. 20.5.2010. Specification of HYDRAULIC JACK ( 10 TON CAPACITY) i ) Capacity - 10 Ton. ii ) Type - SP –SR- 10-300. iii ) Closed height - 600mm. iv ) Hydraulic Lift - 300mm. v ) Total extend height - 900mm. vi ) Ram Dia - 46 to 50mm. vii ) Body Dia - 100mm (Approx) Viii ) Base size - 160 X 160mm (Approx)

TENDER SCHEDULE

T.C . No. 61/09/9023 RT . D td. 20.5.2010. Specification of STAIR CLEANER

DESCRIPTION TECHNICAL PARAMETERS

Working width, brush (mm) 170/200

Dimensions (l x w x h) in mm 360 X 180/200 X 330

Brush motor (W) 120

Weight (kg) 05

Brush speed, sweeping/washing(U/min) 0 - 470

Page 27: Bulletin 35

49