bulk carrier
TRANSCRIPT
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
MAN B&W Diesel A/S, Copenhagen, Denmark
Contents:
Propulsion Trendsin Bulk Carriers
BULKERS
0
5
10
15
20
25
30
35
Small Handysize Handymax Panamax Capesize VLBC
17%
32%
24%
17%
9%
1%
Bulk Carrier Fleet May 2004 � 6,263 ships(Bulk carriers larger than 5,000 dwt)
Classes
Number ofships in %
Propulsion Trends in Bulk Carriers
Introduction ............................................................................................... 3
Market Development ................................................................................. 3
Definition of a bulk carrier ........................................................................... 3
Hull design of a bulk carrier ......................................................................... 3
Bulk carrier sizes and classes ..................................................................... 4
Bulk carrier market .................................................................................... 5
Average Ship Particulars as a Function of Ship Size .............................. 7
Average hull design factor, Fdes ................................................................... 7
Average design ship speed, Vdes ................................................................. 7
Ship speed V as a function of actual draught D ........................................... 9
Propulsion Power Demand as a Function of Ship Size .......................... 10
Average bulk carriers ................................................................................. 10
Average bulk carriers with ice class notation ............................................... 12
Propulsion Power Demand of Average Bulk Carriersas a Function of Ship Speed .................................................................... 13
Small and Handysize bulk carriers ............................................................... 13
Handymax and Panamax bulk carriers ........................................................ 13
Capesize and VLBC bulk carriers ............................................................... 14
Summary ................................................................................................... 15
References ................................................................................................. 15
Page
4
Propulsion Trends in Bulk Carriers
Introduction
Bulk carriers, container vessels andtankers are the three largest groups ofvessels within the merchant fleet and,with our papers on container vesselsand tankers already published, this isthe third in the series, Ref. [1] and Ref. [2].
The demand for raw materials like coal,steel, copper, etc., has increased consid-erably since the turn of the millennium,especially in consequence of globalisationand the great demand for raw materialsin China, owing to the economic growthin this large country. This means thatthe Chinese industry, among others, isabsorbing large quantities of iron oreand other bulk cargoes.
This consequential higher demand forbulk transports, compared to the bulksupply, has caused a dramatic increasein freight rates.
The bulk carrier market, therefore, is veryattractive, which has caused a boost innewbuildings.
The optimum propeller speed is changingas well, steadily becoming lower, becausethe larger the propeller diameter that canbe used for a ship, the actual propellerspeed and pertaining power requirementwill be correspondingly lower, and thelower the propulsion power demand perton bulk transported.
These factors have an influence on whichmain engine type should be selected/in-stalled as the prime mover, and also onthe size of the bulk carrier to be built.
The purpose of this paper – dealing withbulk carrier sizes above 5,000 dwt, andbased on an analysis of bulk carriers built/ordered over the last seven years – isto illustrate the latest ship particularsused for modern bulk carriers, and de-termine their impact on the propulsionpower demand and main engine choice,using MAN B&W Diesel’s latest two-strokeengine programme as the basis.
Market Development
Definition of a bulk carrier
In dictionaries, a bulk cargo is definedas loose cargo that is loaded directlyinto a ship’s hold. Bulk cargo is thus ashipment such as oil, grain, ores, coal,cement, etc., or one which is notbundled, bottled, or otherwise packed,and which is loaded without counting ormarking.
A bulk carrier is therefore a ship in whichthe cargo is carried in bulk, rather thanin barrels, bags, containers, etc., and isusually homogeneous and capable ofbeing loaded by gravity.
On the basis of the above definitions,there are two types of bulk carriers, thedry-bulk carrier and the wet-bulk carrier,the latter better known as tanker.
This paper describes the dry-bulk carriertype, normally just known as bulk carrieror bulker.
Bulk carriers were developed in the1950s to carry large quantities of non-packed commodities such as grain,coal, etc., in order to reduce transpor-tation costs.
As mentioned, bulk carriers are one ofthe three dominating merchant ship typestogether with tankers and containervessels. Today, bulk carriers compriseabout one third of the world fleet intonnage terms.
The world’s, so far, largest bulk carrieris the M/V Berge Stahl with 365,000dwt, built in 1986. This huge iron orebulk carrier measures 343 m in overalllength and has a breadth of 63.5 m,and scantling draught of 23.0 m. Thisship is propelled by an 18,300 kWMAN B&W two-stroke main engine,type 7L90MCE, and has a service shipspeed of 13.5 knots.
Hull design of a bulk carrier
The double hull design has for severalyears, for safety and environmental rea-sons, been required for new tankers of5,000 dwt and above. However, forbulk carriers the standard design, sincethe 1960s, has been a single hull shipwith a double bottom, i.e. a hull withsingle side shells. Therefore, when talk-ing about single or double hull, thewords ‘side’, ‘skin’ or ‘side shell’ areoften used instead of hull.
Studies have shown that the maincause of recorded bulk carrier losses isside shell damage, Ref. [3]. In principle,the application of double hull (skin) onbulk carriers, therefore, will increase thesafety and reduce the number of bulkcarrier losses. Today, only about 2%(2004) of the existing bulk carriers areborn double sided.
Besides the increased safety and theability to better withstand collisions, theuse of double skinned bulk carriers willgive a more efficient cargo handlingcaused by the absence of hull framesand brackets protruding into the cargoholds, replaced by the smooth side ofthe inner hull.
For safety reasons, IMO (InternationalMaritime Organisation) and IACS(International Association of ClassificationSocieties) are bringing in new regula-tions for implementation of water in-gress alarms in cargo holds and forwardspaces. They are also discussing thenecessity of introducing regulations re-quiring double side shells for bulk carriernewbuildings longer than 150 m.
Today, there may be operational orcommercial reasons for some ownersto choose a double skin design, butthere is no present legislation requiringa mandatory double hull bulk carrier de-sign. At the 78th session held in May
5
2004 in the “Marine Safety Committee”of IMO, the double hull proposal wasactually rejected by the majority of themembers.
However, a number of shipyards anddesigners are already now offering doublehull bulk carriers in order to meet thepossible future demand, but also in orderto obtain a more efficient cargo handlingas required by some shipowners, espe-cially when transporting e.g. the stickycoal or coke. Furthermore, it seemsthat the light weight of the double hullship will be only slightly increased, if atall, because of the use of thinner steel
plates. Of course, more welding neededfor the double sides will increase theman-hours and, thereby, the price ofthe ship. Only a minor increase in pro-pulsion power may be expected.
Bulk carrier sizes and classes
The deadweight of a ship is the carryingcapacity in metric tons (1000 kg) includingthe weight of bunkers and other suppliesnecessary for the ship’s propulsion.
The size of a bulk carrier will normally bestated as the maximum possible dead-
weight tonnage, which corresponds tothe fully loaded deadweight at full summersaltwater draught (normally a density of1.025 t/m3), also called the scantlingdraught of the ship.
However, sometimes the deadweighttonnage used refers to the design draught,which is normally less than the scantlingdraught and equals the average loadedship in service. Therefore, the deadweighttonnage that refers to the design draught– which is used for design of the propul-sion system – is normally lower than thescantling draught based deadweighttonnage.
The sizes of the bulk carriers describedin this paper are based on the scantlingdraught and a seawater density of1.025 t/m3 and mainly on the single hulldesign normally used – as only 2% areof the double hull design.
Depending on the deadweight tonnageand hull dimensions, bulk carriers canbe divided into the following maingroups or classes; however, there willbe some overlapping into adjacentgroups, see Fig. 1:
· Small < 10,000 dwt· Handysize 10,000 – 35,000 dwt· Handymax 35,000 – 55,000 dwt· Panamax 60,000 – 80,000 dwt· Capesize 80,000 – 200,000 dwt· VLBC > 200,000 dwt
(VLBC = Very Large Bulk Carrier)
In numbers, both the Handysize,Handymax and Panamax bulk carriersbuilt today are dominating.
Even Ultra Large Handymax bulk carriers,which have a deadweight tonnage ofabout 60,000 dwt, an overall length ofmax. 190 m (Japanese harbours) and abreadth of 32.2 m (Panama Canal), arenow at the project stage.
Even though the maximum overall lengthlimited by the lock chambers is 289.6 m
Bulk carrier type Dimensions Ship size (scantling)
Small Up to 10,000 dwtOverall ship length up to approx 115 m
Handysize 10,000 – 35,000 dwtScantling draught up to approx 10 m
Handymax 35,000 – 55,000 dwtOverall ship length max 190 m(re port facilities in Japan)
Panamax max:max:max:max:max:Ship breadth equal to 32.2 / 32.3 m (106 ft)Overall ship length up to 225 m(re port facilities) 60,000 – 80,000 dwtOverall ship length up to 289.6 m (950 ft)(re canal lock chamber)Passing ship draught up to 12.04 m (39.5 ft)
Capesize 80,000 – 200,000 dwtBreadth approx 43 - 45 m
for 90,000 - 180,000 dwt
VLBC – Very Large Bulk Carrier More than 200,000 dwtOverall ship length above 300 m
Examples on special Bulk carrier sub-classessub-classessub-classessub-classessub-classes
· Kamsarmax: ~82,000 dwt Panamax with increased LOA = 229 m (for Port Kamsar in Equatorial Guinea)
· Dunkirkmax: ~175,000 dwt large Capesize with max LOA = 289 m and max B = 45 m (for the French port’s eastern harbour lock at Dunkirk)
· Newcastlemax: ~185,000 dwt large Capesize with max beam B = 47 m (for use of the Australian port of Newcastle)
· Setouchmax: ~205,000 dwt large Capesize (VLBC) with a low design draught of 16.10 m and max LOA = 299.9 m (for ports in Setouch Sea in Japan)
Fig. 1: Bulk carrier classes
6
creased, as the largest bulk carriers arebecoming bigger and bigger. Often, thelargest ones are called “Ultra LargeCapesize” or just “Very Large Bulk Car-rier” (VLBC). In this discussion, we havedecided, in general, to use the lattername of VLBC for Capesize bulk carriersbigger than 200,000 dwt.
Besides the described main classes forbulk classes, special sub-classes are oftenused in order to describe the specialityof the ship in question, as for examplethe above-mentioned Kamsarmax bulkcarrier.
Other examples of sub-classes areDunkirkmax, Newcastlemax andSetouchmax, as stated in Fig. 1.
Bulk carrier market
Dry bulk like coal, iron and grain wasinitially transported in bags and barrels,etc., but owing to the development ofthe bulk carrier in the 1950s, it is todaytransported as non-packed commodities.
Distribution of bulk carrier classes todayThe bulk carrier fleet has by far takenover the market for transportation ofdry bulk products, and today the fleetof bulk carriers larger than 5,000 dwtaccounts for more than 6,000 ships.
As can be seen from Fig. 2a, showingthe distribution of the bulk carrier fleet(larger than 5,000 dwt) in classes, morethan 70% of the bulk carrier fleet – innumber of ships – is smaller than55,000 dwt, with the dominating 32%being Handysize vessels. The Panamaxvessels account for 17%, and the largeships, Capesize to VLBC, account for10% of the fleet. When comparing thetotal deadweight, instead of the numberof ships, the distribution of bulk carrierclasses changes in favour of the largerbulk carriers as Panamax andCapesize, see Fig. 2b.
(950 ft), the term Panamax-size isdefined as 32.2/32.3 m (106 ft) breadth,225 m overall length, and no more than12.0 m draught (39.5 ft) for passagethrough the canal. The reason for thesmaller ship size (length) used with theseship types is that a large part of the world’sharbours and corresponding facilitiesare based on the length of 225 m.
Panamax bulk carriers continue to growin cargo capacity as the pressure of
worldwide competition forces shipyardsto offer a little bit extra. Thus, a specialso-called Kamsarmax Panamax type withan increased overall length of 229 m and82,000 dwt has been built, and is thelargest size able to load at the world’slargest bauxite port, Port Kamsar inEquatorial Guinea.
The range of the Capesize bulk carriers,i.e. vessels with a deadweight tonnagehigher than 80,000 dwt, has been in-
Fig. 2a: Distribution of bulk carrier classes (number of ships)
Fig. 2b: Distribution of bulk carrier classes (deadweight tonnage)
0
5
10
15
20
25
30
35
Small Handysize Handymax Panamax Capesize VLBC
17%
32%
24%
17%
9%
1%
Bulk Carrier Fleet May 2004 � 6,263 ships(Bulk carriers larger than 5,000 dwt)
Classes
Number ofships in %
0
5
10
15
20
25
30
35
Small Handysize Handymax Panamax Capesize VLBC
Bulk Carrier Fleet May 2004 � 294 million dwt(Bulk carriers larger than 5,000 dwt)
Classes
Total dwt ofships in %
1%
16%
23%26%
30%
4%
7
Age of the bulk carrier fleetFig. 3 shows the age structure of thebulk carrier fleet as of May 2004. Fig. 3also shows in percent of originally deliv-ered ships, the number of ships still inoperation. More than 18% of the bulkcarrier fleet larger than 5,000 dwt hasbeen delivered within the last four years,
and only 20% is more than 25 years old.Only 8% is older than 30 years.
Year of bulk carrier deliveriesFig. 4 shows the number of bulk carriersdelivered in different periods since the1950s. When comparing the number ofships delivered with the age of the bulk
carrier fleet today, see Fig. 3, it will beseen that the lifetime of a bulk carrier isaround 25-30 years. More than 40% ofthe bulk carriers delivered in the years1975-1979 have left the fleet, and morethan 75% built in the years of 1970-74have also left the fleet.
Fig. 4: Year of the bulk carrier deliveries
Fig. 3: Age of the bulk carrier fleet and per cent of delivered ships still in operation (curve)
VLBC
Capesize
Panamax
Handymax
Handysize
Small
0�4 5�9 10�14 15�19 20�24 25�29 30�34 35�39 40�44 45�49 50�0
200
400
600
800
1000
1200
1400
Numberof ships
0%
20%
40%
60%
80%
100%
% ofdeliveredships stillin operation
Age of ships in years
Bulk carrier fleet May 2004(Bulk carriers larger than 5,000 dwt)
0
200
400
600
800
1000
1200
1400
00�04 95�99 90�94 85�89 80�84 75�79 70�74 65�69 60�64 55�59 �54
VLBC
Capesize
Panamax
Handymax
Handysize
Small
Numberof ships
Year of delivery
(Bulk carriers larger than 5,000 dwt)
8
Fig. 5: Average hull design factor of bulk carriers
Fig. 6: Average length between perpendiculars
Average Ship Particularsas a Function of Ship Size
On the basis of bulk carriers built orcontracted in the period 1996-2003, asreported in the Lloyd’s Register -Fairplay’s “PC Register”, we have esti-mated the average ship particulars.
Average hull design factor, Fdes
Based on the above statistical material,the average design relationship be-tween the ship particulars of the bulkcarriers can be expressed by means ofthe average hull design factor, Fdes, seebelow and Fig. 5:
Fdes = LPP × B × Dscant/dwtscant (m3/t)
where
LPP : length between perpendiculars (m)
B : ship breadth (m)
Dscant : scantling draught (m)
dwtscant : deadweight tonnage at scantling draught (t)
For bulk carrier sizes above 55,000dwt, the design factor Fdes shown inFig. 5 is reasonably exact, whereas thefactor is less exact for smaller bulk car-riers. Based on the above design factorFdes, and with corresponding accuracy,any missing particular can be found as:
LPP = Fdes × dwtscant/(B × Dscant) m
B = Fdes × dwtscant/(LPP × Dscant) m
Dscant = Fdes × dwtscant/(LPP × B) m
dwtscant= LPP × B × Dscant/Fdes t
In Figs. 6, 7 and 8, the first three shipparticulars are shown as a function ofthe ship size (dwtscant). The main groupsof bulk carrier classes normally usedare also shown. Of course, there maybe some exceeding and overlapping ofthe groups, as shown by dotted lines.
The three figures show an alternativeship design for a 35,000 dwt Handymaxbulk carrier with a relatively narrow shipbreadth B, but with a longer ship lengthLPP and higher draught D. This narrowership design (B = max. 23.7 m) is usedin the narrow Canadian St. LawrenceCanal to the Great Lakes.
Average design ship speed, Vdes
In Fig. 9, the average ship speed Vdes,used for design of the propulsion sys-tem and valid for the design draughtDdes of the ship, is shown as a functionof the ship size.
Main ship particulars
LBDdwtF
F L B D dwt
PP
des = x x /
: Length between perpendiculars (m): Breadth (m): Scantling draught (m): Deadweight at scantling draught (t): Average hull design factor (m /t)
scant
scant
des3
PP scant scant
Average hull design factor, Fdes
0 100,000 200,000 300,000 400,000
2.0
1.2
1.4
1.6
1.8
Deadweight of ship at scantling draught, dwtscant
dwt
m /t3
1.0
Deadweight of ship at scantling draught, dwtscant
0 50,000 100,000 150,000 200,000 250,000 300,000 350,000 400,0000
100
200
300
400
dwt
Setouchmax L = max 299.9 m
Newcastlemax
Dunkirkmax L = max 289 m
Kamsarmax L = max 229 m
Alternative Handymax(St. Lawrence Canal)
OA
OA
OA
Sm
all
Han
dys
ize
Han
dym
ax
Pan
amax
Cap
esiz
e VLB
C
Length between perpendiculars, LPP
m
9
Fig. 8: Average scantling draught of bulk carriers
Fig. 7: Average ship breadth (beam) of bulk carriers
Deadweight of ship at scantling draught, dwtscant
0 50,000 100,000 150,000 200,000 250,000 300,000 350,000 400,0000
10
dwt
Setouchmax B = max 50 m
Newcastlemax B = max 47 m
Dunkirkmax B = max 45 m
Kamsarmax
Alternative Handymax B = max 23.7 m(St. Lawrence Canal)
Sm
all
Han
dys
ize
Han
dym
ax
Pan
amax
Cap
esiz
e VLB
C
5
15
20
25
30
35
40
45
50
55
60
65
Ship breadth, B
70
75
80m
Deadweight of ship at scantling draught, dwtscant
0 50,000 100,000 150,000 200,000 250,000 300,000 350,000 400,0000
10
dwt
Setouchmax D = max 16.1 m
Newcastlemax
Dunkirkmax
Kamsarmax
Alternative Handymax(St. Lawrence Canal)
design
Sm
all
Han
dys
ize
Han
dym
ax
Pan
amax
Cap
esiz
e
VLB
C
5
15
20
25
Scantling draught, Dscant
m
10
Fig. 9: Average design ship speed of bulk carriers
Fig. 10: Ship speed at actual draught for the same propulsion power of bulk carriers
Fig. 9 also shows that today the averageship speed – except for Small andHandysize bulk carriers – is generallyhigher than or equal to 14.5 knots. Thetrend shown for large Capesize andVLBC is more doubtful as it is based ononly few ship types being built.
Ship speed V as a function ofactual draught D
Depending on the actual deadweightand corresponding displacement, theactual draught D may be lower orhigher than the design draught Ddes.
This might – for the same propulsionpower – influence the actual ship speed V,as shown in Fig. 10. This figure explains,among other things, why shipyards fora given ship design/size might specifydifferent ship speeds. Thus, if in one casethe specified design draught is low, thedesign ship speed will be higher than forthe same ship type specified with a largerdesign draught, as for example equalto the scantling draught.
Deadweight of ship at scantling draught, dwtscant
Average design ship speed, Vdes
0 50,000 100,000 150,000 200,000 250,000 300,000 350,000 400,00010
dwt
Sm
all
Han
dys
ize
Han
dym
ax
Pan
amax
Cap
esiz
e
VLB
C
Knots
11
12
13
14
15
16
17
18
19
60 70 80 90 100 110 120
60 70 80 90 100 110 120
13
14
15
16
�1
0
+1
+2
Designdraught
Design ship speed 14.5 kn
Ship speed, V Change of ship speed, V�
knots knots
% Displacement
% Actual draught
11
Propulsion Power Demandas a Function of Ship Size
Average bulk carriers(without ice class notation)
Based on the already described averageship particulars and ship speeds for bulkcarriers built or contracted in the periodof 1996-2003, we have made a powerprediction calculation (Holtrop & Mennen’sMethod) for such bulk carriers in varioussizes from 5,000 dwt up to 320,000 dwt.
For all cases, we have assumed a seamargin of 15% and an engine margin of10%, i.e. a service rating of 90% SMCR,including 15% sea margin.
The average ship particulars of thesebulk carriers are shown in the tables inFigs. 11-13. On this basis, and valid forthe design draught and design ship speed,we have calculated the specified engineMCR power needed for propulsion. TheSMCR power resultsare also shown in thetables in Figs. 11-13,“ship particulars and pro-pulsion SMCR powerdemand” together withthe selected main engineoptions. These are valid,in all cases, for single-screw bulk carriers. Thesimilar results valid for+/-0.5 knots comparedto the average designship speed are alsoshown.
The average shipparticulars used are,basically, referring tosingle hull bulk carriers,but the SMCR powerdemand found may, asa good guidance, also beused for double hullbulk carriers, by refer-ring to a slightly higherdeadweight tonnagethan valid for the doublehull design. For example,a 54,000 dwt double
Fig. 11: Ship particulars and propulsion SMCR power demand, Small and Handysize bulk carriers
Bulk carrier class Small Handysize
Ship size (at scantling draught) dwt 5,000 8,000 10,000 20,000 30,000
Scantling draught m 6.1 7.3 7.8 9.1 10.0Length overall m 95.0 107.0 117.0 153.0 170.0Length between pp m 90.0 102.0 110.0 143.0 163.0Breadth m 16.0 18.2 19.3 23.2 27.0Design draught m 5.7 6.8 7.3 8.6 9.4Sea margin % 15 15 15 15 15Engine margin % 10 10 10 10 10
Average design ship speed Knots 12.0 13.0 13.5 14.2 14.5SMCR power kW 1,510 2,440 2,920 4,970 6,700Main engine options 1. 5S26MC 4L35MC 4S35MC 5L42MC 5S50MC�C/ME�C
2. 7S26MC 5L35MC 5S42MC 5S50MC
3. 7S35MC 6S46MC�C
Average design ship speed � 0.5 kn Knots 11.5 12.5 13.0 13.7 14.0SMCR power kW 1,280 2,080 2,510 4,320 5,920Main engine options 1. 4S26MC 4L35MC 4S35MC 4S42MC 5S50MC�C/ME�C
2. 4S35MC 5L35MC 5L42MC 5S50MC
3. 6S26MC 6S35MC 5S46MC�C
Average design ship speed + 0.5 kn Knots 12.5 13.5 14.0 14.7 15.0SMCR power kW 1,780 2,860 3,400 5,710 7,780Main engine options 1. 5S26MC 5L35MC 5S35MC 6L42MC 5S50MC�C/ME�C
2. 8S26MC 6L35MC 6S42MC 6S50MC
3. 8S35MC 6S46MC�C
Ship size(at scantling draught)
dwt 35,000 45,000 55,000 65,000 75,000 82,000
alt. (Kamsarmax)St. Law.
Scantling draught m 11.0 10.5 11.6 12.7 12.6 14.2 15.1Length overall m 200.0 178.0 185.0 190.0 225.0 225.0 229.0 (max)Length between pp m 191.0 170.0 177.0 183.0 216.0 217.0 222.0Breadth m 23.7 28.0 30.4 32.26 32.26 32.26 32.26Design draught m 10.0 9.5 10.5 11.5 11.2 12.6 13.4Sea margin % 15 15 15 15 15 15 15Engine margin % 10 10 10 10 10 10 10
Average design shipspeed
Knots 14.5 14.5 14.5 14.5 14.5 14.5 14.5
SMCR power kW 6,730 7,180 8,400 9,350 9,760 10,280 10,780
Main engine options 1.5S50MC-C5S50ME-C
5S50MC-C5S50ME-C
6S50MC-C/ME-C 6S50MC-C/ME-C 5S60MC-C/ME-C 5S60MC-C/ME-C 5S60MC-C/ME-C
2. 5S50MC 6S50MC 6S50MC 7S50MC 5S60MC 6S60MC 6S60MC
3. 6S46MC-C 6S46MC-C 7S46MC-C 5L60MC 7S50MC-C/ME-C 7S50MC-C/ME-C 7S50MC-C/ME-C
Average design shipspeed - 0.5 kn
Knots 14.0 14.0 14.0 14.0 14.0 14.0 14.0
SMCR power kW 5,950 6,280 7,340 8,200 8,620 9,080 9,530
Main engine options 1.5S50MC-C5S50ME-C
5S50MC-C5S50ME-C
5S50MC-C/ME-C 6S50MC-C/ME-C 5S60MC-C/ME-C 5S60MC-C/ME-C 5S60MC-C/ME-C
2. 5S50MC 5S50MC 6S50MC 6S50MC 5S60MC 5S60MC 5S60MC
3. 5S46MC-C 5S46MC-C 6S46MC-C 5S60MC 6S50MC-C/ME-C 6S50MC-C/ME-C 7S50MC
Average design shipspeed + 0.5 kn
Knots 15.0 15.0 15.0 15.0 15.0 15.0 15.0
SMCR power kW 7,610 8,210 9,620 10,600 11,050 11,640 12,200
Main engine options 1.5S50MC-C5S50ME-C
6S50MC-C6S50ME-C
7S50MC-C/ME-C 7S50MC-C/ME-C 5S60MC-C/ME-C 6S60MC-C/ME-C 6S60MC-C/ME-C
2. 6S50MC 6S50MC 7S50MC 5L60MC-C 6S60MC 6S60MC 6S60MC
3. 6S46MC-C 7S46MC-C 8S46MC-C 6L60MC 7S50MC-C/ME-C 8S50MC-C/ME-C 8S50MC-C/ME-C
Bulk carrier class Handymax Panamax
Fig. 12: Ship particulars and propulsion SMCR power demand, Handymax and Panamax bulk carriers
12
Fig. 13: Ship particulars and propulsion SMCR power demand, Capesize and VLBC bulk carriers
Fig. 14: Propulsion SMCR power demand of an average bulk carrier
Ship size (at scantling draught) dwt 80,000 100,000 150,000175,000(Dunkirkmax)
205,000(Setouchmax)
230,000 320,000
Scantling draught m 13.1 13.6 17.3 18.4 18.7 18.6 22.8Length overall m 225.0 235.0 270.0 289.0 (max) 299.9 (max) 320.0 332.0Length between pp m 217.0 226.0 260.0 279.0 289.0 308.0 320.0Breadth m 37.0 43.0 44.0 45.0 (max) 50.0 53.0 58.0Design draught m 12.1 12.6 16.0 17.0 16.1 (max) 17.2 21.0Sea margin % 15 15 15 15 15 15 15Engine margin % 10 10 10 10 10 10 10
Average design ship speed Knots 14.5 14.5 14.5 14.7 14.7 14.7 14.7SMCR power kW 11,230 12,790 14,950 16,800 18,500 20,260 24,680Main engine options 1. 5S60MC-C/ME-C 6S60MC-C/ME-C 5S70MC-C/ME-C 6S70MC-C/ME-C 6S70MC-C/ME-C 6S80MC-C/ME-C 7S80MC-C/ME-C
2. 6S60MC 7S60MC 6S70MC 6S70MC 7S70MC 6S80MC 7S80MC
3. 8S50MC-C/ME-C 5S65ME-C 6S65ME-C 6S65ME-C 7S65ME-C
Average design ship speed - 0.5 kn Knots 14.0 14.0 14.0 14.2 14.2 14.2 14.2SMCR power kW 9,920 11,300 13,350 15,000 16,580 18,180 22,190Main engine options 1. 5S60MC-C/ME-C 5S60MC-C/ME-C 5S70MC-C/ME-C 5S70MC-C/ME-C 6S70MC-C/ME-C 5S80MC 6S80MC-C/ME-C
2. 5S60MC 6S60MC 5S70MC 6S70MC 6S70MC 6S80MC-C/ME-C 7S80MC
3. 7S50MC-C/ME-C 6S60MC-C/ME-C 5S65ME-C 6S65ME-C 6S65ME-C 6S80MC
Average design ship speed + 0.5 kn Knots 15.0 15.0 15.0 15.2 15.2 15.2 15.2SMCR power kW 12,710 14,280 16,740 18,660 20,660 22,560 27,160Main engine options 1. 6S60MC-C/ME-C 7S60MC-C/ME-C 6S70MC-C/ME-C 6S70MC-C/ME-C 7S70MC-C/ME-C 6S80MC-C/ME-C 7S80MC-C/ME-C
2. 7S60MC 7S60MC 6S70MC 7S70MC 8S70MC 7S80MC 8S80MC
3. 5S65ME-C 6S65ME-C 7S65ME-C 8S65ME-C 6S90MC-C/ME-C
Bulk carrier class Capesize VLBC
Deadweight of ship at scantling draught, dwtscant
0 50,000 100,000 150,000 200,000 250,000 300,000 350,000 400,0000
dwt
Setouchmax
Newcastlemax
Dunkirkmax
Kamsarmax
Alternative Handymax(St. Lawrence Canal)
Sm
all
Han
dys
ize
Han
dym
ax
Pan
amax
Cap
esiz
e VLB
C
5,000
10,000
15,000
20,000
25,000
30,000 + 0.5 knAverage designship speed
� 0.5 kn14.7 kn
14.5 kn
SMCR power includes:15% sea margin10% engine margin
SMCR powerkW
13
Fig. 15: Minimum required propulsion SMCR power demand (CP-propeller) for average-size bulk carriers with Finnish-Swedish ice class notation (for FP-propeller add +11%)
the minimum ice class required propul-sion power demand may be higher orlower than the above-mentioned SMCRpower used for an average bulk carrierwithout ice class notation.
The ice class rules most often used andreferred to for navigation in ice are the“Finnish-Swedish Ice Class Rules”, whichhave just been updated. These rules areissued by the Finnish Maritime Adminis-tration and apply to all classificationsocieties via IACS.
Based on the above-described bulkcarriers, the minimum power demandof the ice classed ships, class 1A Super,1A, 1B and 1C, have been estimatedfor all the bulk carrier classes up to250,000 dwt and drawn-in in Fig. 15. Ingeneral, the lowest ice classes, 1B and1C can – power-wise – always be met.
However, the strongest classes, 1ASuper and 1A, will require a higherpropulsion power than the normallyneeded average SMCR power for bulkcarriers without ice class notation.
Model tests have shown that the powerfound when using the above new ice classformulae is often in excess of the realpower needed for propulsion of the ship.Furthermore, it has been concludedthat the formulae can only be usedwithin certain limitations of ship particu-lars and therefore Annex 1, listing therestrictions to the validity of the formu-lae, has been added to the rules.
Ships outside the limitations stipulatedin Annex 1 havehavehavehavehave to be model testedindividually, e.g. Capesize bulk carrierslonger than the max limitation for shiplength stated in Annex 1 (65.0 m < Loa< 250.0 m).
It is to be expected that many ownersmay choose to use model tests in anycase, and independent of the shiplength, because the model test mayshow that a smaller engine can be in-stalled than what can be calculated us-ing the formulae.
hull design could be corresponding toan about 55,000 dwt single hull design.
The graph in Fig. 14 shows the above-mentioned table figures of the specifiedengine MCR (SMCR) power needed forpropulsion of an average bulk carrierwithout ice class notation. The SMCRpower curves valid for +/-0.5 knotcompared to the average design shipspeed are also shown.
Average bulk carrierswith ice class notation
When sailing in ice with a bulk carrier,the ship has to be ice-classed for thegiven operating need of trading in coastalstates with seasonal or year-round ice-covered seas.
Besides the safety of the hull structureunder operation in ice, the minimumrequired propulsion power for breakingthe ice has to be met.
Depending on the ice class rules andspecific ice classes required for a ship,
Deadweight of ship at scantling draught, dwtscant
SMCR power
0 50,000 100,000 150,000 200,000 250,0000
dwt
Sm
all
Han
dys
ize
Han
dym
ax
Pan
amax
Cap
esiz
e
VLB
C
kW
5,000
10,000
15,000
20,000
25,000
30,000
1A Super
Normal SMCRpower for averagebulk carriers withoutice class notation
14.7 kn
14.5 kn
35,000
40,000
45,000
1A
1B
1C
1ASuper
1A
1B
1C Alternative handymax(St. Lawrence Canal)
14
Fig. 16: Propulsion SMCR power demand of Small and Handysize bulk carriers
Propulsion Power Demandof Average Bulk Carriers asa Function of Ship Speed
When the required ship speed is changed,the required SMCR power will changetoo, as mentioned above, and othermain engine options could be selected.This trend – with the average ship par-ticulars and average ship speed as thebasis – is shown in detail in Figs. 16-18.See also the description below givingthe results of the main engine selectionfor the different classes of bulk carriers.
If, to a required ship speed, the neededSMCR power for a given main engine isnot sufficient, please note that the fol-lowing relevant main engines used for
bulk carriers also may be delivered inupdated versions with mep = 20 bar(+ 5.3% more power output):
S46MC-CS50MC-C/ME-CS60MC-C/ME-CS70MC-C/ME-CS80MC-C/ME-C (+7.7%)
Small and Handysizebulk carriers
For Small and Handysize bulk carriers,see Fig. 16, the selection of main en-gines is not so distinct as for the largebulk carrier classes. Some owners andyards might prefer four-stroke engines,while others prefer and specify two-strokeengines. One owner/yard might prefer
an 8S35MC (5,920 kW at 173 r/min),and the other, a 6L42MC (5,970 kW at176 r/min).
For the larger bulk carrier classes, theselection of main engine is, as men-tioned, more uniform, see below.
Handymax and Panamaxbulk carriers
The main engines most often selectedfor Handymax bulk carriers, see Fig. 17,are the 5 and 6S50MC/MC-C/ME-C,with the 6S50 type being the optimumchoice for meeting the power demandof all Handymax bulk carriers sailing upto 14.5 knots in service.
Deadweight of ship at scantling draught, dwtscant
0 5,000 10,000 15,000 20,000 25,000 30,000 35,0000
dwt
Small
Handysize
11.0 kn
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
11,000
12,000
11.5 kn12.0 kn
12.5 kn
13.0 kn13.5 kn
14.0 kn
14.5 kn
15.0 kn
15.5 kn
16.0 kn
4S26MC5S26MC6S26MC7S26MC
6L35MC5L35MC
7L35MC6S35MC
7S35MC
6L42MC6S42MC5L50MC
6S46MC�C5S50MC�C
6S50MC�C
Average ship speed
SMCR power
kW
15
Fig. 17: Propulsion SMCR power demand of Handymax and Panamax bulk carriers
The main engines used for Panamaxbulk carriers, see Fig. 17, are mainlythe 5 and 6S60MC/MC-C/ME-C, withthe 6S60 type being the optimumchoice for meeting the power demandfor nearly all Panamax bulk carriers sail-ing up to 15.5 knots in service.
Capesize and VLBCbulk carriers
Today, in particular the 6S60MC/MC-C/ME-C and 6S70MC engines are usedfor propulsion of the Capesize bulk car-riers, see Fig. 18. The recently devel-oped S65ME-C is now also available,with 6 or 7 cylinder units being mostsuitable.
For VLBCs, the 6S70MC/MC-C/ME-Cand 6S80MC-C/ME-C types are almostexclusively used as the main engine to-day, see Fig. 18. The recently devel-oped S65ME-C is of course also avail-able. For the larger VLBCs of the fu-ture, the 6 and 7S80MC-C/ME-C andthe 6S90MC-C/ME-C will be most fea-sible.
Deadweight of ship at scantling draught, dwtscant
SMCR power
30,0000
dwt
Handymax
Panamax
kW
4,000
6,000
8,000
10,000
40,000 50,000 60,000 70,000 80,000
12,000
14,000
16,000
18,000
Alt. Handymax, 14.5 kn(St. Lawrence Canal)
Kamsarmax
13.0 kn
13.5 kn
14.0 kn
14.5 kn
15.0 kn
15.5 kn
16.0 kn
5S50MC6S46MC�C
5S50MC�C/ME�C6S50MC
6S50MC�C/ME�C7S50MC
7S50MC�C/ME�C6L60MC
5S60MC
7S50MC�C/ME�C5S60MC�C/ME�C
6S60MC
6S60MC�C/ME�C
Average
ship speed
2,000
16
Fig. 18: Propulsion SMCR power demand of Capesize and VLBC bulk carriers
Summary
The bulk carrier market is an increas-ingly important and attractive transportsegment which, thanks to the everincreasing global market volume, isexpected to continue to be of greatimportance.
Since its start in about 1950, the bulkcarrier fleet, in terms of deadweighttonnage, has increased about 33% ofthe total world fleet operating today.
The demands on the reliability, efficiencyand low maintenance costs of the mainengines are growing, and only the besttwo-stroke diesel engines can meetthese demands.
As described, MAN B&W Diesel is ableto meet the engine power needs of anysize or type of vessel in the modernbulk carrier fleet.
References
[1] Propulsion Trends in Container VesselsMAN B&W Diesel A/S, Copenhagen,Denmark, February 2001
[2] Propulsion Trends in TankersMAN B&W Diesel A/S, Copenhagen,Denmark, November 2002
[3] Side frame failure blamed in recentbulk carrier lossLloyd’s List, 18 June 2002, page 3
Deadweight of ship at scantling draught, dwtscant
50,000 dwt
Capesize
VLBC
10,000
13.0 kn13.5 kn14.0 kn
15.0 kn15.5
kn16.0
kn
Average
ship speed
100,000 150,000 200,000 250,000 300,000 350,000 400,000
Setouchmax
Newcastlemax
Dunkirkmax
15,000
20,000
25,000
30,000
35,000
5S60MC5S60MC�C/ME�C
6S60MC
6S60MC�C/ME�C 5S70MC
5S70MC�C/ME�C6S70MC
6S70MC�C/ME�C7S70MC
7S70MC�C/ME�C 6S80MC
6S80MC�C/ME�C
7S80MC
7S80MC�C/ME�C
6S90MC�C/ME�C
14.5 kn
0
5,000
7S65ME�C
6S65ME�C
5S65ME�C
SMCR power
kW40,000
17
MAN B&W Diesel A/STeglholmsgade 41DK-2450 Copenhagen SVDenmarkTelephone +45 33 85 11 00Telefax +45 33 85 10 30E-mail: [email protected]
Copyright© MAN B&W DieselReproduction permitted provided source is given.Subject to modification in the interest of technical progress.Reg. No. 39 66 13 14
P9056-00 September 04
MAN B&W Diesel - a member of the MAN Group