8/10/2019 Budgetted Lesson in Tle 7

1/2

Department of Education

Region VIII-Eastern Visayas

Division of Southern Leyte

District of Libagon

LIBAGON NATIONAL HIGH SCHOOL

Libagon, Southern Leyte

Budget of Lessons in TLE 7

S.Y. 2014 2015

A. First Quarter CAREGIVING

LESSON LEARNING COMPETENCIES TIME FRAME

a. Use Tools, Equipment and

Paraphernalia

LO1. Identify caregiving tools, equipment, and

paraphernalia applicable to a specific job.5 hours

LO2. Use caregiving tools, equipment and

paraphernalia properly.8 hours

b. Perform Calculations LO1. Perform simple calculations. 9 hours

c. Practice Occupational Health

and Safety Procedures

LO1. Identify hazards and risks 4 hours

LO2. Evaluate and control hazards and risks 6 hours

d. Maintain Tools, Equipment

and Paraphernalia

LO1. Perform aftercare activities for tools,

equipment, and paraphernalia.8 hours

B. Second Quarter AQUACULTURE

LESSON LEARNING COMPETENCIES TIME FRAME

a. Use Farm/Fishery Tools and

Equipment

LO1. Select and use farm tools. 4 hours

LO2. Select and operate farm equipment. 4 hours

LO3. Perform preventive maintenance. 4 hours

b. Perform Estimation and Basic

Calculation

LO1. Perform estimation. 4 hours

LO2. Perform basic workplace calculations. 4 hours

c. Draw the Layout Plan for

Ponds, Tanks, Pens and Cages

LO1. Draw layout plan for ponds. 4 hours

LO2. Draw layout plan for tanks. 4 hours

LO3. Draw layout plan for pens and cages. 4 hours

d. Apply Safety Measures on

Farm Operations

LO1. Apply appropriate safety measures. 4 hours

LO2. Safely keep/dispose tools, materials and

outfit.4 hours

C. Third Quarter

COMPUTER HARDWARE AND SERVICING

LESSON LEARNING COMPETENCIES TIME FRAME

a. Use Hand Tools

LO1. Prepare hand tools. 5 hours

LO2. Use appropriate hand tools and test

equipment.3 hours

LO3. Maintain hand tools. 2 hours

b. Perform Mensuration and

Calculation

LO1. Select components to be measured. 5 hours

LO2. Carry out measurements and calculation. 5 hours

c. Prepare and Interpret

Technical Drawing

LO1. Identify different kinds of technical

drawings.3 hours

LO2. Interpret technical drawing. 3 hours

d. Practice Occupational Health

and Safety Procedures

LO1. Identify hazards and risks. 4 hours

LO2. Evaluate hazards and risks. 3 hours

LO3. Control hazards and risks. 3 hours

8/10/2019 Budgetted Lesson in Tle 7

2/2

D. Fourth Quarter ELECTRICAL INSTALLATION AND MAINTENANCE

LESSON LEARNING COMPETENCIES TIME FRAME

a. Prepare Electrical Materials

and Tools

LO1. Identify electrical supplies materials and

tools.12 hours

LO2. Request appropriate electrical supplies

materials and tools applicable to a specific job.

LO3. Receive and inspect electrical supplies,

materials and tools.

b. Perform Mensuration and

Calculation

LO1.Select electrical measuring tools and

instruments. 6 hours

LO2. Carry out measurements and calculation.

c. Interpret Technical Drawings

and Plans

LO1. Analyze signs, electrical symbols and data.6 hours

LO2. Interpret technical drawings and plans.

d. Maintain Tools and

Equipment

LO1. Check condition of tools and equipment.

8 hoursLO2. Perform basic preventive maintenance.

LO3. Store tools and equipment.

e. Practice Occupational Health

and Safety Procedures

LO1. Identify hazards and risks.

8 hoursLO2. Evaluate hazards and risks.

LO3. Control hazards and

risks and practiceOccupational Health and Safety

Prepared by:

JACKYLOU SALUDES-SARSALE

SST I