bucket selection guide supplemental specifications … located and slip resistant, left & right...

*Photo may include optional equipment.PLEASE CONTACT

www.hyundai-ce.com 2010.03 Rev 0

Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.All imperial measurements rounded off to the nearest pound or inch.

Bucket Selection Guide

optional eQuipMentClimate control : - air conditioner only - heater onlyBeacon light, rotatingLighting, auxiliary, 4 on front roof (2 Xenon work lights)Lighting, auxiliary, 4 on rear roofSecondary steering systemFire extinguisher

High lift arrangement with optional counterweight, 840 kg (1,850 lb)Hydraulic control, 2 leverHydraulic control, 3 leverMud guardOperator suitRide control systemSeat

- 2” static seat belt & adjustable mechanical suspension(vinyl) - 3” static seat belt & adjustable mechanical suspensionPallet ForksTires : - 17.5 - 25, 12PR, L3

- 20.5 - 25, 16PR, L2 - 20.5 R25 XHA* - 20.5 - 25 16PR, L5Tool kitTooth, 1 piece, bolt-on typeGuards - crankcase - transmissionWheel chock

Dual-brake pedalRoll-screen(rear window)License plate & lampPre-cleaner engine air intakeJoystic steering

StandaRd eQuipMentelectrical systemAlternator, 70AAlarms, audible and visual - air filter clogging - transmission error - alternator voltage - brake oil pressure - engine oil pressure - parking brake - fuel level - hydraulic oil temperature - coolant temperature - service brake oil pressureAlarm, back-upBatteries, 950 CCA, 12V, (2)24-volt to 12-volt DC converterGauges - engine coolant temperature - fuel level - hydraulic oil temperature - speedometer - transmission oil temperature - voltmeterHorn, electricIndicator lights - clutch cut-off - high beam - turn signal - work lightLCD Display - clock and fault code - operating hour counter - engine rpm

- transmission gear range indicator - job time and distance - temperature(coolant, hydraulic oil, T/M oil)Lighting system - 2 LED dome lights - 2 stop and tail lights - 4 turn signals - brake lights(counterweight) - 2 head lights on front tower - 2 working lights on front roof - 2 working lights on grillSwitches - work load - clutch cut-off - hazard - lgnition key, start/stop switch - main light (illumination and head light) - parking - rear wiper & washer - work light - pilot cut-offStarter, electricStarting and charging system(24-volt)Main disconnect switchcabCab, ROPS(ISO3471)/FOPS(ISO3449) (sound suppressed and pressurized) with : - cigar lighter & ashtray - coat hook

- automatic climate control - air conditioner & heater - defroster - intermittent wiper and washer, front and rear - personal storage space: holder, can and cup - rear view mirrors (2 inside) - hated rear view mirrors (2 outside) - Air suspension seat (heated) with 3" seat belt - tilt / telescopic steering column - steering wheel with knob - sunvisor (front window) - tinted safety glassMagazine pocketPedals - one accelerator pedal - one brake pedalRubber floor matWrist restRadio/USB playerJoystick with travel switch(FNR)engineAntifreezeEngine, Cummins QSB6.7 - low Emission Diesel, Tier-III3 operating mode - power/standard/econoEngine enclosure, lockableEngine fuel priming pump

Fan guardFuel/water separatorFuel warmerMuffler, under hood with large exhaust stackRain cap, engine air intakeRadiator (deaeration type)Starting aid (air intake heater)Water sensor on fuel filterpower trainBrakes : Service, enclosed wet-discDifferential, Front & Rear : limited slipParking brakeTorque converterTransmission, computer-controlled, electronic soft shift, auto-shift and quick-shift features includedTransmission oil cooler3 piece cutting edge, bolt-on typeHydraulicsBoom kickout, automaticBucket positioner, automaticDiagnostic pressure tapsHydraulic system, - 2 spool, single lever, pilot control for boom and bucket actuation - 3rd spool for auxiliary functionSteering, load-sensingRemote cooling fan, hydraulically-driven, temperature sensing type

othersArticulation locking barCoolant level sight gaugeCounterweightDoor and cab locks, one keyDoors, service access(locking)Drawbar with pinEngine oil level dipstick gaugeErgonomically located and slip resistant, left & right - handrails - ladders - platforms - stepsFenders(front/rear)Guard, bucket cylinder rodHI-Mate (Remote Management System)Rear view cameraHydraulic oil level sight gaugeLicense plate bracketLift and tie-down hooksSteering stops, cushionedTires(20.5-25,16PR,L3)Transmission oil site levelVandalism protection caplocks

3.3(4.3)

3.1(4.1)

2.9(3.8)

2.7(3.5)

2.5(3.3)

2.3(3.0)

2.1(2.7)

1400

2000 2500 3000 3500 4000

1600 1800 2000 24002200

Material Density

HL757-9

kg/m3

lb/yd3

Bu

cket

Cap

acit

y, m

3 (y

d3 )

HL757XTD-9HL757TM-9

SuppleMental SpecificationS

Description

17.5-25 12PR L3

20.5-25 16PR L2

20.5 R25 XHA*

Change in operating

weight kg(lb)

-248 (-547)

-64 (-141)

+507 (+1,118)

Change in static tipping

load-straight kg(lb)

-180 (-400)

-50 (-110)

+380 (+840)

Change in static tipping

load-40o turn kg(lb)

-160 (-350)

-40 (-90)

+330 (+730)

We build a better future

With Tier 3 Engine installed

Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more precision, versatile machine preferences, and proven quality. Take pride in your work with Hyundai!

Load sensing hydraulic system with variable displacement piston pump and closed-center MCV (main control valve).Long-life cooling system, designed for additional durability, resistant to thermal shock, impulse and vibration.Redesigned steering cylinder lug and bucket link, now cast steel for additional strength and reliability.

Reversible, swing-out, cooling fan for easy service and improved cooler maintenance.Ground level access to critical service points, filters and sight gauges for easy maintenance.Long life hydraulic filter and oil for reduced operating costs.

Improved Durability

Serviceability

Engine TechnologyProven, reliable, fuel efficient, low noise Cummins Tier-lll QSB6.7 engine.Electronically controlled for optimum fuel to air ratio and clean, efficient combustion.HPCR(High Pressure Common Rail) fuel system / Self-diagnostic system.3 engine modes, P (Power), S (Standard), E (Econo) for full power or reduced fuel consumption according to operator preference.

Full Automatic TransmissionVariable shift control with 4 selectable modes - M (Manual), L (Light), N (Normal), H (Heavy).Transmission auto warm up system for added protection.Self-diagnostic system that keeps a record of machine service and alarm history.Kick down button and FNR (Forward / Neutral / Reverse) switch on RH joystick for improved operator convenience.

AxlesLimited slip differentials (front & rear) for easy driving on variable ground condition.Self adjusting brake & wheel speed brake.

Improved VisibilityLarger operator's cab for additional comfort.Redesigned cab with rounded front glass and larger door glass for a larger field of view.

Improved ConvenienceIncreased cooling & heating capacity with fully automatic climate control system. Tilting & telescopic steering column.Adjustable wrist rest for reduced operating stress.Multiple storage compartments.AM/FM Radio with MP3 interface and USB input.Improved ladder with 20 Degree incline and large, deep tread, aluminum cast steps for safer access and exit from the cab.

Advanced 5.7'' Color MonitorEasy-to-read new color LCD display.Auto boom kick out and bucket positioner - fully adjustable from within the cab.Integrated load weight system, viewable through the monitor, for improved work efficiency and overload prevention.Self diagnostic & monitoring system with active display of engine, hydraulic system, transmission and electrical component information.Color, rear-view, back-up camera for improved safety and convenience.RMS(Remote Management System) works through GPS/satellite technology to provide better customer service and support.

Reliable Main Components

Enhanced Operator Comfort

Machine Walk-Around

2/3

Pride at Work

*Photo may include optional equipment.

Operator PreferenceOperating a 9 series wheel loader is unique to every operator. Operators can fully customize their work environment and operating preferences to fit their individual needs.

4/5

The newly designed cabin was conceived for more space, a wider field of view and operator comfort. The front glass is rounded and 17% wider than the previous 7A series. Special attention was given to a clean, open and convenient interior with plenty of visibility on the machine surroundings and the job at hand. This well balanced combination of cab ergonomics puts the operator in the perfect position to work safely and securely. The 9 series cab's fully automatic climate control system features 11 air vents and increased cooling and heating capacity for optimum temperature control. The defroster vents located on the front and rear windows and a PTC (electric pre-heater) make working in cold weather more hospitable.

Spacious and Convenient Cab

Tilting / telescopic steering column

Wrist rest FNR switch Sun screen Heated side mirrors AM/FM Radio with MP3/AC control


The advanced new monitor with 5.7 inch wide color LCD screen allows the operator to easily and efficiently control the machine. The operator can adjust boom kick-out and bucket position via switches overhead while monitoring the adjustment settings through the monitor. An integrated load weight system that contributes to improved work efficiency, can also be viewed through the monitor. Self diagnostics, color rear-view camera maintenance check lists and start-up machine security, were integrated into the monitor to make the machine more versatile and the operator more productive. The new monitor display unit is mounted on an adjustable swivel mount to reduce glare and position according to operator preference.

Advanced Color Monitor

In the 9 series cabin you can easily adjust the steering column and wrist rest to best suit your preferred comfort level. Pilot-operated joystick controls are easy and comfortable to operate. An FNR (Forward/Neutral/Reverse) switch on the control lever facilitates easy

selection of travel direction. Roller style sun screens on the front window and rear window allow the operator to reduce glare and improve visibility. Heated side mirrors feature built-in hot wires for quick defrosting during cold weather conditions.

Operator Comfort

Work is stressful enough. Your work environment should be stress free. Hyundai's 9 series cabin offers lots of amenities, additional space and a comfortable seat to minimize stress to the operator. A powerful climate control system provides the operator with optimum air temperature. An advanced audio system with AM/FM stereo with MP3 interface and USB input, plus remotely located controls is perfect for listening to music favorites.

Reduced Stress

40˚80mm

Monitor Tilt Range

Horizontal

Total : 30o

Vertical

Total : 14o

CCW : 540o

7o

CW : 540o

15o

An enhanced axle improves driving over variable ground conditions. Self adjusting brakes that automatically regulate disc clearance, reduce service time and improve brake reliability and performance. The new load sensing hydraulic system with a variable volume piston pump and closed center main control valve, provide efficient hydraulic power and additional energy savings. Service and clean-out are easier on the 9 series, now equipped with a completely redesigned, parallel-mounted, cooler configuration and non louvered fins to prevent clogging. All coolers are designed with aluminum bar plate configuration and undergo strict factory tests for thermal shock, impulse and vibration to assure long term durability. Top mounted non-louvered aluminum air condenser and variable displacement A/C compressor are designed for maximum cooling capacity, energy savings and easy clean-out. Additionally, the redesigned steering cylinder lug and bucket link, are now cast steel for additional strength and reliability.

Improved Durability & Reliability

Variable Operating Modes

Precision & Performance

9 series wheel loaders are designed to allow the operator to customize the machine's engine power, automatic transmission shift timing and clutch cut-off activation based on the job condition and personal operator preference. Convenient rotary type switches allow for easy adjustment of engine power mode, transmission power shift mode, and clutch cut-off mode. Additionally, if equipped with the optional ride control system, the operator has the option to turn the system on or off with an overhead switch. The ride control system has a shock absorbing accumulator that cushions the boom, improves operator comfort and reduces material loss. The versatility of the 9 series operating modes contributes to improved productivity, enhanced operator comfort and reduced fuel consumption.

6/7

Innovative hydraulic system technologies make the 9 series wheel loader fast, smooth and easy to control. 9 series wheel loaders are designed for maximum performance to keep the operator working productively.

Full Automatic Transmission

Fully automatic transmission designed for maximum durability, minimum power loss, improved travel speed and low noise. Improved clutch control and minimized shifting shock when traveling, contribute to a smoother ride. Error messages and transmission fault history are recorded and accessible through the monitor.


3 Mode Engine Power Selection P(Power) Mode : Heavy duty workS(Standard) Mode : General workE(Economy) Mode : Light duty work

4 Mode Transmission Power Shift SystemM(Manual) ModeAuto L(Light) Mode : Light duty & long distance carryAuto N(Normal) Mode : General excavating & loadingAuto H(Heavy) Mode : Heavy duty excavating & loading

3 Mode Clutch Cut-Off SystemL(Low) Mode : Short distance & faster loadingM(Medium) Mode : General loadingH(High) Mode : Slope ground

The CUMMINS QSB6.7 engine combines advanced electronic controls and a self-diagnostic system with reliable performance. The combination of a high pressure common rail system and an advanced in-cylinder combustion technology results in increased power, improved transient response and reduced fuel consumption. The QSB6.7 Cummins engine complies with current emissions standards including EPA Tier3 and EU Stage III-A.

Eco-friendly Cummins QSB 6.7 Engine

The 9 series is designed for reduced lubrication intervals and extended component life. Long life hydraulic filters now have 1,000 hours service intervals and Hyundai certified hydraulic oil can last up to 5,000 hours before changing. Also, a new center pivot roller bearing design, now double tapered, requires less maintenance as well. Long life and extended wear components save the operator time and money.

ProfitableThe 9 series is designed to maximize profitability through improved efficiencies,enhanced service features and longer life components.


Full Fenders and Mud Guards (Option)9 series wheel loaders can be equipped with optional full rear fenders and front and rear mud flaps to reduce material splatter to the cab and machine frame.

Remote-mounted Cooling FanThe remote mounted, hydraulically powered cooling fan regulates fan speed according to working temperatures for coolant, intake air, transmission oil and hydraulic oil. This new fan design contributes to reduced fuel consumption and machine noise. The fan is designed to auto reverse periodically or manually reverse to keep debris from accumulating on the coolers.

Hi-mate (Remote Management System)Hi-mate, Hyundai's proprietary remote management system, provides operators and dealer service personnel access to vital service and diagnostic information on the machine from any computer with internet access. Users can pinpoint machine location using digital mapping and set machine work boundaries, reducing the need for multiple service calls. Hi-mate saves time and money for the owner and dealer by promoting preventative maintenance and reducing machine downtime.

Easy AccessThe engine fan is integrated into the rear door which swings open to over 45 degrees for easy access and regular maintenance. Conveniently located coolant and transmission oil site gauges make checking fluid levels fast and efficient. Ground-line access to fuel and oil filters grease fittings, fuses, machine computer components and wide open compartments makes service more convenient on the 9 series.

Extended Life Components

8/9

Hydraulic filter(1,000 hr)

Hydraulic Oil(5,000 hr)

10/11

Maker/Model CUMMINS QSB6.7

type

Gross power 173 HP(129 kW) / 2,100rpm

net power 170 HP(127 kW) / 2,100rpm

Maximum torque 83 kg.m(600 lb.ft) / 1,400rpm

no. of cylinders 6

4-cycle, turbocharged, charge aircooled direct injection,

electronic controlled diesel engine

※ No derating for continuous operating required up to 3,048m (10,000ft). This engine meets the EPA(Tier III) / EU(Stage III-A) Emission regulation.

※Full automatic power shift, countershaft type with soft-shift in range and direction. Properly matched torque converter to engine and transmission for excellent working ability.

KJ

IHG

D

A

C

F

E

L

B

M

N

KJ

IHG

D

A

C

F

E

L

B

M

N

Bucket Type

A. Dumping clearance at max.

height and 45o dump angle.

Full lift

7ft height

C. Digging depth

on ground

at carry

E. Overall height (fully raised)

F. Bucket pivot max. height

2,840 (9’ 4”)

1,070 (3’ 6”)

1,610 (5’ 3”)

85 (3.3”)

7,580 (24’ 10”)

7,480 (24’ 6”)

5,250 (17’ 3”)

3,920 (12’ 10”)

3,230 (10’ 7”)

1,100 (3’ 7”)

1,970 (6’ 6”)

92 (3.6”)

7,990 (26’ 3”)

7,920 (26’)

5,650 (18’ 6”)

4,310 (14’ 2”)

2,840 (9’ 4”)

1,315 (4’ 4”)

1,815 (5’ 11”)

100 (3.9”)

7,780 (25’ 6”)

7,570 (24’ 10”)

5,410 (17’ 9”)

4,010 (13’ 2”)

B. Reach

D. Overall length

unitdescription Hl757-9 Hl757Xtd-9 Hl757tM-9

G. Front overhang

H. Wheelbase

I. Ground clearance

J. Height over exhaust

K. Height over cab

on ground

at carry

M. Dump angle

Clearance circle

N. Overall width(with / without bucket)

2,560 (8’ 5”)

3,050 (10’)

410 (1’ 4”)

2,875 (9’ 5”)

3,310 (10’ 10”)

43

48

47

12,170 (39’ 11”)

2,740(9’)/2,580(8’ 6")

2,970 (9’ 9”)

3,050 (10’)

410 (1’ 4”)

2,875 (9’ 5”)

3,310 (10’ 10”)

43

50

47

12,540 (41’ 2”)

2,740(9’)/2,580(8’ 6")

2,760 (9’ 1”)

3,050 (10’)

410 (1’ 4”)

2,875 (9’ 5”)

3,310 (10’ 10”)

50

54

50

12,250 (40’ 2”)

2,740(9’)/2,580(8’ 6")

mm (ft-in)

mm (ft-in)

mm (ft-in)

mm (ft-in)

mm (ft-in)

deg

deg

deg

mm (ft-in)

mm (ft-in)

description unit Hl757-9 Hl757Xtd-9 Hl757tM-9

L. Roll-back angle

Operating weight kg (lb) 14500 (32000)

Heaped m3(yd3) 2.7 (3.7)

Struck m3(yd3) 2.4 (3.1)

Breakout force-bucket kg (lb) 12530 (27620)

Straight kg (lb) 11300 (24910)

Full turn kg (lb) 9700 (21380)

Hl757Xtd-9

15000 (33000)

2.7 (3.7)

2.4 (3.1)

12420 (27380)

9880 (21780)

8520 (18780)

description unit Hl757-9 Hl757tM-9

15000 (33070)

2.7 (3.7)

2.3 (3.0)

12800 (28220)

9750 (20840)

8360 (17970)

Bucket capacity

Tipping load

enGine

Bore x Stroke 107 mm (4.21”) x 124 mm (4.88”)

displacement 6.7ℓ(409 cu in)

compression ratio 17.2 : 1

air cleaner Dry, dual elements

alternator 24V, 70 Amp

Battery 2 x 12V, 130 Ah.

Starting motor 24V, 3.7 kW

torque converter type 3-elements, single-stage

single-phase

tire 20.5-25, L3

tRanSMiSSion

travel speed

forward 6.9(4.3)

11.4(7.1)

23.0(14.3)

37.7(23.4)

Reverse 7.3(4.5)

12.1(7.5)

24.2(15.0)

1st

2nd

3rd

4th

1st

2nd

3rd

km/h (mph)

aXleS

drive system Four-wheel drive system

Mount Rigid front axle and oscillating rear axle

Rear axle oscillation ±13o (total 26o)

Hub reduction Planetary reduction at wheel end

differential Front & rear limited slip

Reduction ratio 23.680

HydRaulic SySteM

type

pump

control valve

Load-sensing hydraulic system

2spool (Bucket, Boom)3spool (Bucket, Boom, Aux)

Pilot pressure controlled typeSystem pressure : 280 kgf/cm2(3.982PSI)

Variable axial piston type, 185 liters/min (48.9 gal/min)@governed rpm

BRakeS

Service Brakes

parking Brake

emergency Brake

Hydraulically actuated, wet disc brakes actuate all 4 wheels

independent axle-by-axle systemSelf adjusting & wheel speed brake

Spring-applied, hydraulically released brake in front axle

When brake oil pressure drops, indicator light alerts operator and

parking brake automatically applies.

SteeRinG SySteM

type

pump

Relief Valve Setting

cylinder Type Bore x Stroke

Steering angle

Load-sensing hydrostatic articulated steering

Piston pump, 105 ℓ/min (27.7 gal/min)@governed rpm

250 kg/cm2(3,555 psi)

Double acting65mm x (2.6") x 436mm(17.2")

40o(each direction)

Features- Center-point frame articulation. - Tilt and telescopic steering column.

SeRVice Refill capacitieS

oVeRView

diMenSionS

type Tubeless, loader design tires

Standard 20.5-25, 16 PR, L3

options include 17.5-25, 12 PR, L3 20.5-25, 16 PR, L2 20.5 R25 XHA★

20.5-25, 16 PR, L5

tiReS

294 liters (77.6 USgal)




fuel tank

cooling system

crankcase

transmission





front axle

Rear axle

Hydraulic tank

Hydraulic system (including tank)

mm (ft-in)

mm (ft-in)

mm (ft-in)

mm (in)

mm (ft-in)

mm (ft-in)

mm (ft-in)

mm (ft-in)

General purpose bolt-on cutting edge

Specifications & Dimensions

Bucket Type

Lift Circuit

Tilt Circuit

cylinders

cycle time

Pilot operated lift and tilt circuit,single-lever(joystick) control standard.

The valve has four functions ; raise, hold, lower and float.

Can adjust automatic kickout from horizontal to full lift.

The valve has three functions ; tilt back, hold and dump.

Can adjust automatic bucket positioner to desired load angle.

Type : Double acting No. of cylinders-bore x stroke;

2-ø120 mm x 785 mm(4.7" x 30.9")ø140 mm x 485 mm(5.5" x 19.0")

2-ø110 mm x 755 mm(4.3" x 29.7")

Raise(with load)DumpLower(empty)Total

5.9 sec1.1 sec3.8 sec

10.8 sec

5.9 sec1.8 sec3.7 sec

11.4 sec

HL757-9 / HL757XTD-9 HL757TM-9

controls

HL757TM-9

HL757-9/757XTD-9/757TM-9LiftTilt HL757-9/757XTD-9

bucket selection guide supplemental specifications … located and slip resistant, left & right...

Documents