bts3900 adding new site procedure
DESCRIPTION
BTS3900 Adding New Site ProcedureTRANSCRIPT
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
CÔNG TY CỔ PHẦN VIỄN THÔNG DI ĐỘNG TOÀN CẦU
Process of adding new siteQuy trình khai trạm mới
This documents describes how to add a BTS of the 3900 GSM BTS family in TDM transmission mode for the BSC, and how to configure the site device attributes, cell basic attributes, and TRX attributes.
Page 1
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
VERSION DOCUMENT
Version document Finished Date Remark
English
CHECKED CONTENT
Writer Checker Approver
Đoàn Thanh Việt
Page 2
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
CONTENT PageCHECKED CONTENT................................................................................................................2
1 Parameters need when we add new site...............................................................................5
2 Process of adding new site BTS GSM 3900.........................................................................6
2.1 Start the wizard for adding a BTS................................................................................6
2.2 Choose Add Site. A dialog box is displayed, as shown in figure 2.1...........................6
2.3 Click Add Site. A dialog box is displayed, as shown in figure 2.2..............................7
2.4 Set the parameters by referring to table 2.1.................................................................7
2.5 Click OK. A dialog box is displayed, as shown in figure 2.3.......................................7
2.6 Click Next. A dialog box is displayed, as shown in figure 2.4.....................................8
2.7 Select a BTS, and then click Add Cell. A dialog box is displayed, as shown in figure 2.5 ...........................................................................................................................................9
2.8 Set the parameters by referring to table 1.2.................................................................9
2.9 Click OK. A dialog box is displayed, as shown in figure 2.6.......................................9
2.10 Click Next. A dialog box is displayed, as shown in figure 2.7...................................10
2.11 Click Site Attributes. A dialog box is displayed, as shown in figure 2.8..................10
2.12 Add FMU and DEMU at slot 8 and 1 as shown in figure 2.9...................................11
2.13 Right-click in the RRU Topology area and choose Add RXU Chain from the shortcut menu. A dialog box is displayed, as shown in figure 2.10.....................................12
2.14 Set the parameters by referring to table 1.2..............................................................12
2.15 Click OK. A dialog box is displayed, as shown in figure 2.11..................................12
2.16 Right-click the RXU chain...........................................................................................13
2.17 Choose Add RXU > Add DRFU. A dialog box is displayed, as shown in figure 2.12..........................................................................................................................................13
2.18 Set the parameters by referring to table 1.2..............................................................14
2.19 Click OK. The DRFU is added....................................................................................14
2.20 Right-click the DRFU...................................................................................................14
Page 3
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.21 Choose Configure RXU Attributes from the shortcut menu. A dialog box is displayed, as shown in figure 2.13..........................................................................................14
2.22 Click the Configure Site Board Attributes tab to display the tab page, as shown in figure 2.14.................................................................................................................................15
2.23 Set the parameters by referring to table 1.2...........................................................16
2.24 Right-click the DRFU................................................................................................16
2.25 Choose Biding logical TRX from the shortcut menu. A dialog box is displayed, as shown in figure 2.15............................................................................................................16
2.26 Click OK to return to the dialog box shown in figure 2.11...................................16
2.27 Repeat step 2.13 through step 2.26 to configure more DRFUs and TRXs...........16
2.28 Click Next. A dialog box is displayed, as shown in figure 2.16.............................16
2.29 Click Cell Attributes. A dialog box is displayed, as shown in figure 2.17............17
2.30 Set the basic attributes of the cell by referring to table 1.2...................................18
2.31 Click Frequency Config. A dialog box is displayed, as shown in figure 2.18.......19
2.32 Set the Frequency Config of the cell by referring to table 1.2...............................19
2.33 Click TRX config. A dialog box is displayed, as shown in figure 2.19..................19
2.34 Click Channel Attributes tab. A dialog box is displayed, as shown in figure 2.20. ..........................................................................................................................................20
2.35 Click Device Attributes tab. A dialog box is displayed, as shown in figure 2.21.20
2.36 Click Frequency Hopping. A dialog box is displayed, as shown in figure 2.22. . .21
2.37 Set the Frequency Hopping of the cell by referring to table 1.2...........................21
2.38 Click Configure MA group. A dialog box is displayed, as shown in figure 2.23. 21
2.39 Set the HSN of the cell by referring to table 1.2.....................................................22
2.40 Click OK to finish the cell and click Finish. The BTS3900 is configured............22
Page 4
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
1 Parameters need when we add new site
GEIUB Slot No.
GEIUB Port No.
Physical Position on BM Cabinet
Multiplexing Modes BTS Site Name BTS Type
20 14 1-20-14 2:1 Cau-So-1_KGG BTS3900 GSM
Table 1.1: Abis port planning.
HuaweiCellName Cau-So-11_KGG Cau-So-12_KGG Cau-So-13_KGG
HuaweiBSC(ByLAC) BSC_401H_KGG
HuaweiSiteName Cau-So-1_KGG
GSM900/GSM1800 GSM1800
BTSType BTS3900
MCC 452
MNC 07
HuaweiLAC(DEC) 401
HuaweiCI(DEC) 1381 1382 1383
HuaweiPlanningTRXNo. 4 4 4
NCC 1 1 1
BCC 7 7 7
HuaweiBSIC(NCC-BCC) 17 17 17
BCCH 522 525 528
TCHChannelConfig 563,564,565,566,567,568,569,570,571,572,573,574,575,576,577,578,579,580,581,582,583,584,585,586,587
FHMode RFH RFH RFH
HSN 16 16 16
MAIO 0,6,12 2,8,14 4,10,16SDCCH/8 TIMESLOT 2 2 2
PDCH 1 static PDCH and 2 dynamic PDCH
1 static PDCH and 2 dynamic PDCH
1 static PDCH and 2 dynamic PDCH
Table 1.2: Engineer and radio parameters planning
Page 5
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2 Process of adding new site BTS GSM 3900
2.1 Start the wizard for adding a BTS
When adding a BTS for the first time, you can start the wizard for adding a BTS only on the GEIUB/GOIUB in the GMPS or GEPS. On the BSC6000 Local Maintenance Terminal, right-click a GEIUB in the GMPS.
2.2 Choose Add Site. A dialog box is displayed, as shown in figure 2.1
Figure 2.1
Page 6
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.3 Click Add Site. A dialog box is displayed, as shown in figure 2.2
Figure 2.2
2.4 Set the parameters by referring to table 2.1
2.5 Click OK. A dialog box is displayed, as shown in figure 2.3
Page 7
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
Figure 2.3
2.6 Click Next. A dialog box is displayed, as shown in figure 2.4
Figure 2.4
Page 8
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.7 Select a BTS, and then click Add Cell. A dialog box is displayed, as shown in figure 2.5
Figure 2.5
2.8 Set the parameters by referring to table 1.2
2.9 Click OK. A dialog box is displayed, as shown in figure 2.6
Figure 2.6
Page 9
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.10 Click Next. A dialog box is displayed, as shown in figure 2.7
Figure 2.7
2.11 Click Site Attributes. A dialog box is displayed, as shown in figure 2.8
Page 10
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
Figure 2.8
2.12 Add FMU and DEMU at slot 8 and 1 as shown in figure 2.9
Figure 2.9
Page 11
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.13 Right-click in the RRU Topology area and choose Add RXU Chain from the shortcut menu. A dialog box is displayed, as shown in figure 2.10
Figure 2.10
2.14 Set the parameters by referring to table 1.2
2.15 Click OK. A dialog box is displayed, as shown in figure 2.11
Page 12
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
Figure 2.11
2.16 Right-click the RXU chain
2.17 Choose Add RXU > Add DRFU. A dialog box is displayed, as shown in figure 2.12
Page 13
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
Figure 2.12
2.18 Set the parameters by referring to table 1.2
2.19 Click OK. The DRFU is added
2.20 Right-click the DRFU
2.21 Choose Configure RXU Attributes from the shortcut menu. A dialog box is displayed, as shown in figure 2.13
Page 14
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
Figure 2.13
2.22 Click the Configure Site Board Attributes tab to display the tab page, as shown in figure 2.14
Figure 2.14
Page 15
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.23 Set the parameters by referring to table 1.2
2.24 Right-click the DRFU
2.25 Choose Biding logical TRX from the shortcut menu. A dialog box is displayed, as shown in figure 2.15
Figure 2.15
2.26 Click OK to return to the dialog box shown in figure 2.11
2.27 Repeat step 2.13 through step 2.26 to configure more DRFUs and TRXs
2.28 Click Next. A dialog box is displayed, as shown in figure 2.16
Page 16
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
Figure 2.16
2.29 Click Cell Attributes. A dialog box is displayed, as shown in figure 2.17
Page 17
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
Figure 2.17
2.30 Set the basic attributes of the cell by referring to table 1.2
Page 18
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.31 Click Frequency Config. A dialog box is displayed, as shown in figure 2.18
Figure 2.18
2.32 Set the Frequency Config of the cell by referring to table 1.2
2.33 Click TRX config. A dialog box is displayed, as shown in figure 2.19
Figure 2.19
Page 19
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.34 Click Channel Attributes tab. A dialog box is displayed, as shown in figure 2.20
Figure 2.20
2.35 Click Device Attributes tab. A dialog box is displayed, as shown in figure 2.21
Figure 2.21
Page 20
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.36 Click Frequency Hopping. A dialog box is displayed, as shown in figure 2.22
Figure 2.22
2.37 Set the Frequency Hopping of the cell by referring to table 1.2
2.38 Click Configure MA group. A dialog box is displayed, as shown in figure 2.23
Figure 2.23
Page 21
47 Phạm Viết Chánh, Quận 1, Thành Phố Hồ Chí MinhĐT: (08) 54043375 Fax: (08) 54043376
2.39 Set the HSN of the cell by referring to table 1.2
2.40 Click OK to finish the cell and click Finish. The BTS3900 is configured
Page 22