Cable Distribution at the Front of the BTS3012AE Cabinet The cables at the front of the BTS3012AE cabinet are RF cables, monitoring signal cables, signal transfer cables, E1 cables, power cables, and PGND cables. Cable Distribution at the Front of the Cabinet

NOTE: For the cabling of the DTRU, the cabling of type A DTRU is taken as an example. The combining short-circuiting signal cable is not required when type B DTRU is used.

Figure 1 shows the cable distribution at the front of the cabinet when the DDPU is configured. Figure 1 Cable distribution at the front of the cabinet (configured with the DDPU)