STAGE PLATFORMS QUICK START MANUAL

WWW.BRITEQ-LIGHTING.COM Page: 2 Quick start manual – 07/2013

BT-STAGE-PLF-2X1M stage platform 2m x 1m without legs BT-STAGE-PLF-1X1M stage platform 1m x 1m without legs

Both platforms are equipped with special black HEXA anti-slip surface for outdoor use.

Technical Specifications 2x1m

Frame Aluminium (EN AW-6063 T66)

fulfillment plywood The maximum load 500 kg/m2 Weight 32 kg

WWW.BRITEQ-LIGHTING.COM Page: 3 Quick start manual – 07/2013

1. Put the legs into the aluminum leg corners and fasten it with the control.

Legs available from stock: BT-STAGE-LEGFIX-40CM simple round legs with fixed height 40cm BT-STAGE-LEGFIX-60CM simple round legs with fixed height 60cm BT-STAGE-LEGADJ-45/60CM adjustable round legs with height ranging from 45 to 60cm BT-STAGE-LEGADJ-60/90CM adjustable round legs with height ranging from 60 to 90cm

Other heights on special order.

Aluminium leg corner

WWW.BRITEQ-LIGHTING.COM Page: 4 Quick start manual – 07/2013

2. Connect the platforms using the clamps below

Also available:

BT-STAGE-LEGCLAMP-4 : leg clamp for 4 legs

BT-STAGE-PLFLEVEL self leveling insert

BT-STAGE-PLFCLAMP BIG deck clamp

BT-STAGE-PLFCLAMP-SMALL clamping clamp

BT-STAGE-LEGCLAMP-2 leg clamp for 2 legs

WWW.BRITEQ-LIGHTING.COM Page: 5 Quick start manual – 07/2013

3. Connect the handrails

Handrail connector

BT-STAGE-PLFRAIL-2M – aluminium handrail 2m or BT-STAGE-PLFRAIL-1M – aluminium handrail 1m

WWW.BRITEQ-LIGHTING.COM Page: 6 Quick start manual – 07/2013

4. Attach the rail clamps to the platform and mount the handrail

handrail assembly clamp

WWW.BRITEQ-LIGHTING.COM Page: 7 Quick start manual – 07/2013

5. Connect the handrails with the optional clamp.

6. Stage exploitation

a) In the event the stage is set in one place for an extensive period of time, inspect – prior to each use – whether all legs, stairs and barrier fastenings, as well as clamps connecting legs and platforms are tight enough.

b) Rain may cause undermining of the surface the stage is installed on; therefore, the stability of all the legs and their correct support should be checked. Adjust the legs in the event they have been undermined. Use wooden supports if needed. Long-term exposure to humidity may result in deformation of platform tops.

c) Check condition of all the elements after each disassembly. Check for any cracks or dents in platform sections. Legs should be inspected for cracks or dents, too. Telescopic legs should allow smooth adjustment within the full scope. In the event of major damages, contact the supplier in order to arrange repair or replacement of the damaged element

d) Take care of the stage during loading and unloading to ensure long-lasting and trouble-free operation; do not throw or drag stage elements. One platform should be carried by two persons.

e) BT-STAGE platforms have built-in transport security elements; nevertheless, check if protective rubber elements are still on the platform corners. Platforms transported on pallets must be fastened together using transport belts; place thick cardboard where a transport belt touches the platform. All the small parts and tools must be placed in a box

A lot of other items and accessories are available on special demand!

Ask us or contact us via: www.briteq-lighting.com