BSNL DGN Objective questions1. First-level managers must possess skills, which include knowledge of and proficiency in the methods, processes and procedures for carrying out activities.a. Humanb. Conceptualc. Designd. Technical

2. Which of the following skills is important at all levels of an organization?a. Conceptualb. Designc. Humand. Technical

3. Which of the following skills indicates the ability to solve problems in ways that will benefit the enterprise?a. Designb. Humanc. Conceptuald. Technical

4. Managers possessing skill have the ability to understand and coordinate the full range of corporate objectives and activities.a. Design skillb. Human skillc. Conceptual skilld. Technical skill

5. Which of the following approaches to management examines practical cases but is having only limited value for developing management theory?a. Group behavior approachb. Systems approachc. Operational approachd. Empirical approach

6. Which of the following is also known as the mathematical approach?a. Operational approachb. Management science approachc. Management roles approachd. Systems approach

7. Which of the following approaches to management advocates a system ofcooperation using both interpersonal and group behavioral aspects?a. Sociotechnical approachb. Contingency approachc. Situational approachd. Cooperative social systems approach

8. Under which system does a worker's wage increase in proportion to theoutput produced?a. Time-and-motion studyb. Piece-rate incentive systemc. Micromotion studyd. Gantt Chart

9. Who proposed the task-and-bonus system under which workers are given a bonus if the work is completed before the set time?a. Frederick W. Taylorb. Henry L. Ganttc. Frank B. Gilbrethd. Max Weber

10. The theorists ignored the human desire for job satisfaction.a. Scientific managementb. Bureaucratic managementc. Administrative theoryd. Management science

11. Which type of management approach focuses only on the economic andphysical needs of workers and ignores their social needs?a. Scientific managementb. Bureaucratic managementc. Administrative managementd. Operations management

12.Which one of the following did not contribute to the behavioral concept ofmanagement?a. Elton Mayob. Mary Parker Folletc. Chris Argyrisd. Henry R. Towne

13. A branch of the classical viewpoint of management, is basedon Max Weber's research in the field of management.a. Bureaucratic managementb. Scientific managementc. Administrative managementd. Weber management

14. which of the following is the fastest memory in the terms of accessibility?1. Read only memory2. Cache memory3.Random Access memory4. Dynamic random access Memory

15. Registers are associated with_________1. Input2. memory3.control4. output

16. _______________ is an example of sequential storage device1. Magnetic Tape2. floppy disk3. Hard disk4. CD-ROM

17.Programs and procedures in an information system are _____________1. data resources2. people resources3. hardware and software resources4. all the above

18.The information circulated in a company grapevine can be called as ____________1. knowledge information2. sampled information3.informal information4. organizational information

19.what is the term used to refer to alignment of the beginning and end of lines1.indentation2. justification3. superscript4 font

20. what is the character positioned below normal text called?1. superscript2. italic3.font4.subscript

21. spread sheet is a ________________1. superscript2.Italic3.font4.subscript

22.The first Factories Act was enacted ina),1881b),1895c),1897d),1885Answer- a), 1881

23, Who is an adult as per Factories Act, 1948 ?a. Who has completed 18 years of ageb. who is less than 18 yearsc. who is more than 14 yearsd. who is more than 15 yearsAnswer- a). Who has completed 18 years of age

24. A person who has ultimate control over the affairs of the factory under Factories Act, 1948 is called as _________

a. Occupierb. Managerc. Chairmand. Managing Director.Answer - a. Occupier

25, The space for every worker employed in the Factory after the commencement of Factories Act, 1948 should be ________ Cubic Meters.

a. 9.9b. 10.2c. 14.2d. 13.2Answer- c. 14.2

26,The provision for cooling water during hot weather should be made by the organization if it employees _______ or more employees.

a. 200b. 250c. 300d. 150Answer- b. 250

27.Who is an Adolescent as per Factories Act, 1948 ?a. Who has completed 17 years of ageb. who is less than 18 yearsc. who has completed 15 years but less than 18 years.d. None of theseAnswer- c. who has completed 15 years but less than 18 years.

28, Which one of the following is not a welfare provision under Factories Act, 1948a.Canteenb. Crechesc.First Aidd.Drinking water.Answer- d. Drinking water.

29, First Aid Boxes is to be provided for ______ of personsa. 125b. 135c. 150d. 160Answer- c. 150

30,Safety Officers are to be appointed if Organisation is engaging ______ or more employees.a. 1000b. 2000c. 500d. 750Answer- a. 1000

31 Canteen is to be provided if engaging employees more than ______ persons.a. 250b. 230c. 300d. 275Answer- a. 250

32 Leave with wages is allowed for employees if they work for _______ days in a month.a. 15b. 25c. 20d. 28Answer- c. 20

33. Welfare Officers are to be appointed if Organisation is engaging ______ or more employees.a. 500b. 250c. 600d. 750Answer- a. 500

34. The Ambulance Room is to be provided if engaging employees more than______a. 400b. 350c. 500d. 450Answer- c. 500

35, Creche is to be provided if ______ or more lady employees are engaged.a. 25b. 32c. 30d. 40Answer- c. 30

36. An adult worker can upto ____ hrs in a day as per factories Act, 1948a. 8b. 9c. 10d. 12Answer-. b. 9

37, Obligations of Workers under the Factories Act 1947 was discussed in section -----a) 78b) 101c) 111d) 99Answer - Sec.111

38. The term Sabbatical is connected witha) Paid leave for studyb) Paternity leavec) Maternity leaved) Quarantine leaveAnswer- Paid leave for study

39. Section 49 of the Factories Act 1947 Says abouta) Welfare officerb) Canteenc) Rest roomd) CrcheAnswer is - Welfare officer

40. Section 2 ( K )of the Factories Act 1947 says abouta) Manufacturing Processb) Factoryc) Workerd) None of theseAnswer : Manufacturing Process

41., If the factory employs more than 1000 workers, they should appoint qualified ------------- to carry out the prescribed dutiesa) Safety Officerb) Welfare officerc) Security officerd) None of theseAnswer : a) Safety Officer

42. For contravention of provisions of Factories Act or Rules, the occupier shall liable for punishment up toa)2 years or fine up to Rs.1,00,000 or bothb) 6 months or fine upto 10, 000 or bothc) 3 three years or fine 10, 000 or bothd) None of theseAnswer a)2 years or fine up to Rs.1,00,000 or both.

43. In case of fatal accident occurred inside the factory , a separate accident report shall be sent to the District magistrate in Form No ---- within 12 hoursa) Form No:16b) Form No:18 Ac) Form No :18 Bd) Form No:18

44., Manager of every factory should sent a annual report to the Inspectorate of factories containing details like numbers of workers employed , leave with wages, safety officers ,ambulance room, canteen, shelter, accidents in form no --- on or before 31 st Januarya) Form No : 22b) Form No: 21c) Form No: 25 Ad) Form No: 25 BAnswer: a) Form No: 22

45. If any employee found violating the section 20 of Factories Act 1947 shall be fine up toa)Rs. 10b) Rs. 5c) Rs. 15d) Rs.20Answer :b ) Rs. 5

46. Section 41- G of the Factories Act 1948 says abouta) Fencing of machineriesb) Facing of machineriesc) Work on near machinery in motionAnswer-d) Workers participation in safety management

47. Find the minimum value of the objective function where minimum z=20x+35y1. 21002.16003.8004.3700

48. which of the following is not an advantage of MRP system?1. Ability to price competitively2. Better Customer service3. longer idle time4. Reduced set up and tear down costs

49. Accounting Ratios are important tools used by(a) Managers,(b) Researchers,(c)Investors,(d) All of the above

50. Net Profit Ratio Signifies:(a) Operational Profitability,(b) Liquidity Position,(c) Big-term Solvency,(d)Profit for Lenders.

51. Working Capital Turnover measures the relationship of Working Capital with:(a)Fixed Assets,(b)Sales,(c)Purchases,(d)Stock.

52.. In Ratio Analysis, the term Capital Employed refers to:(a)Equity Share Capital,(b)Net worth,(c)Shareholders' Funds,(d)None of the above.

53. Dividend Payout Ratio is:(a)PAT Capital,(b)DPS EPS,(c) Pref. Dividend PAT,(d) Pref. Dividend Equity Dividend.

54 DU PONT Analysis deals with:(a) Analysis of Current Assets,(b)Analysis of Profit,(c)Capital Budgeting,(d) Analysis of Fixed Assets

55. In Net Profit Ratio, the denominator is:(a)Net Purchases,(b)Net Sales,(c) Credit Sales,(d) Cost of goods sold.

56. Inventory Turnover measures the relationship of inventory with:(a) Average Sales,(b)Cost of Goods Sold,(c)Total Purchases,(d) Total Assets.

57.. The term 'EVA' is used for:(a)Extra Value Analysis,(b)Economic Value Added,(c)Expected Value Analysis,(d)Engineering Value Analysis.

58.. Return on Investment may be improved by:(a)Increasing Turnover,(b) Reducing Expenses,(c)Increasing Capital Utilization,(d)All of the above.

59.. In Current Ratio, Current Assets are compared with:(a)Current Profit,(b)Current Liabilities,(c)Fixed Assets,(d)Equity Share Capital.

60.. ABC Ltd. has a Current Ratio of 1.5: 1 and Net Current Assets of Rs. 5,00,000. What are the Current Assets?(a)Rs. 5,00,000,(b)Rs. 10,00,000,(c)Rs. 15,00,000,(d) Rs. 25,00,000

61. There is deterioration in the management of working capital of XYZ Ltd. What does it refer to?(a)That the Capital Employed has reduced,(b)That the Profitability has gone up,(c)That debtors collection period has increased,(d)That Sales has decreased.

62. Which of the following does not help to increase Current Ratio?(a)Issue of Debentures to buy Stock,(b)Issue of Debentures to pay Creditors,(c)Sale of Investment to pay Creditors,(d)Avail Bank Overdraft to buy Machine.

63. Debt to Total Assets Ratio can be improved by:(a)Borrowing More,(b)Issue of Debentures,(c)Issue of Equity Shares,(d)Redemption of Debt.

64.. Ratio of Net Income to Number of Equity Shares known as:(a)Price Earnings Ratio,(b) Net Profit Ratio,(c)Earnings per Share,(d) Dividend per Share.

65. Trend Analysis helps comparing performance of a firm(a)With other firms,(b)Over a period of firm,(c)With other industries,(d) None of the above.

66. A Current Ratio of Less than One means:(a)Current Liabilities < Current Assets,(b)Fixed Assets > Current Assets,(c)Current Assets < Current Liabilities,(d) Share Capital > Current Assets.

67. XYZ Ltd. has earned 8% Return on Total Assests of Rs. 50,00,000 and has a Net Profit Ratio of 5%. Find out the Sales of the firm.(a) Rs. 4,00,000,(b)Rs. 2,50,000,(c)Rs. 80,00,000,(d)Rs. 83,33,333.

68. Suppliers and Creditors of a firm are interested in(a)Profitability Position,(b)Liquidity Position,(c)Market Share Position,(d) Debt Position.

69. Which of the following is a measure of Debt Service capacity of a firm?(a)Current Ratio,(b)Acid Test Ratio,(c) Interest Coverage Ratio,(d) Debtors Turnover.

70. Gross Profit Ratio for a firm remains same but the Net Profit Ratio is decreasing. The reason for such behavior could be:(a) Increase in Costs of Goods Sold,(b)If Increase in Expense,(c) Increase in Dividend,(d)Decrease in Sales.

71. Which of the following statements is correct?(a) A Higher Receivable Turnover is not desirable,(b) Interest Coverage Ratio depends upon Tax Rate,(c)Increase in Net Profit Ratio means increase in Sales,(d) Lower Debt-Equity Ratio means lower Financial Risk.

72. Debt to Total Assets of a firm is .2. The Debt to Equity boo would be:(a) 0.80,(b)0.25,(c) 1.00,(d)0.75

73. Which of the following helps analysing return to equity Shareholders?(a) Return on Assets,(b) Earnings Per Share,(c) Net Profit Ratio,(d)Return on Investment.

74. Return on Assets and Return on Investment Ratios belong to:(a) Liquidity Ratios,(b)Profitability Ratios,(c)Solvency Ratios,(d)Turnover.

75. XYZ Ltd. has a Debt Equity Ratio of 1.5 as compared to 1.3 Industry average. It means that the firm has:(a) Higher Liquidity,(b)Higher Financial Risk,(c)Higher Profitability,(d)Higher Capital Employed.-------------------------------------- END OF PART-A -------------------------------------