bseries ipcamera manual - hiper red
TRANSCRIPT
B Series——Astro Boy ModelB Series——Astro Boy Model
IP CameraIP Camera
2010-3 V2.3
User ManualUser Manual
IP CAMERA User Manual
Index
1 INTRODUCTION ......................................................................................................................... 4
2 FUNCTION AND FEATURES .................................................................................................... 4
3 APPEARANCE AND INTERFACE ............................................................................................ 6
3.1 APPEARANCE .................................................................................................................................. 6 3.2 INTERFACE OF EQUIPMENT ............................................................................................................. 6
4 NETWORK CONNECTING ......................................................................................................... 8
4.1 CONNECTION INSTRUCTION ............................................................................................................. 8 4.2 VISIT INSTRUCTION ......................................................................................................................... 8
5 VISIT IP CAMERA FROM LAN ................................................................................................ 9
5.1 SET IP ADDRESS ......................................................................................................................... 9 5.2 VISIT IP CAMERA ......................................................................................................................... 11
6 VISIT IP CAMERA FROM WAN ................................................................................................ 13
6.1 PORT FORWARDING ......................................................................................................................... 13 6.2 DDNS ...................................................................................................................................... 14
6.2.1 Manufacturer’s DDNS ......................................................................................................... 14 6.2.2 Third Party DDNS ............................................................................................................. 14
7 OTHER SETTINGS ..................................................................................................................... 15
7.1 NETWORK SETTING ......................................................................................................................... 15 7.1.1 Basic Network Setting ......................................................................................................... 15 7.1.2 WIFI Setting ..................................................................................................................... 15 7.1.3 ADSL Setting ..................................................................................................................... 16 7.1.4 UPnP Setting ..................................................................................................................... 16 7.1.5 DDNS Setting ..................................................................................................................... 16
7.2 ALARM SETTINGS ......................................................................................................................... 16 7.2.1 Alarm Setting ..................................................................................................................... 16 7.2.2 Mail Service Setting ............................................................................................................. 17 7.2.3 FTP Service Setting ............................................................................................................. 18 7.2.4 Alarm Server ..................................................................................................................... 19
7.3 MAINTAIN ...................................................................................................................................... 19 7.3.1 Device Information ............................................................................................................. 19 7.3.2 User Setting ......................................................................................................................... 19 7.3.3 Time Setting ......................................................................................................................... 21 7.3.4 Other settings ..................................................................................................................... 21 7.3.5 Firmware upgrade ............................................................................................................. 22 7.3.6 Restore Factory Default .................................................................................................... 22
2
IP CAMERA User Manual
7.3.7 User browsing Log ............................................................................................................. 22
8 CENTRALIZATION CONTROL ................................................................................................ 22
9 TECHNICAL PARAMETERS .................................................................................................... 23
10 FAQ .............................................................................................................................................. 24
3
IP CAMERA User Manual
1 Introduction
The IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your
local network or over the Internet.
Your IP Camera package should contain the following items, If any of the listed items are missing, please contact your reseller from where you purchased the camera for assistance.
The package includes: IP Camera * 1
IP Camera Utility CD *1
5V Power Adapter *1
Stand of plastic * 1
Cable * 1If you need the device with wifi function, please choose the model of /W, it has built-in wifi module and transmitting antenna.
2 Function and Features
The video is compressed by MJPEG. There are VGA/QVGA two video resolutions optional. User can change some parameters according to their demands to satisfy his own visual prefer.
W i t h b u i l t - i n M i c r o p h o n e , a n d a l s o p r o v i d i n g a i n t e r f a c e f o r e x t e r n a l
4
IP CAMERA User Manual
mic , it enables user to monitor the sound on the site. User can also connect this equipment to the speaker, and it supports two-way intercom function.
It was equipped with pan/tilt function, horizontally 350°and vertically 70°. Its outlook is smart, easy and convenient to install in many sites.
I t a d o p t s t h e T C P / I P n e t w o r k p r o t o c o l s a n d h a s i n n e r w e b s e r v e r . U s e r s c a n browse video through IE and other browsers. Data is transferred through one port; it is easy for user to do the network setting.
Support 802.11b/g protocol, can build up wireless monitoring. Supports UPNP, port forwarding automatically on the router. M o t i o n d e t e c t i o n a n d a l a r m p i n c a n b e c o n n e c t e d t o e x t e r n a l s e n s o r s t o d e t e c t
environmental situation. Alarming record can be stored by email, FTP server. External alarm can be open
w h e n d e t e c t i n g u n u s u a l i t y . I t a l s o s e n d s a l a r m i n f o t o t h e a l a r m server.
Infrared LED for night vision covers 5m area, to realize 24 hours monitoring. Support three level of user authority. Support upgrading online. Manufacture attached a label at the bottom of each IP Camera, i t include Device
ID, DDNS. When IP Camera is connected to the internet, this URL can be used to visit the device.
Manufacture provides free software, support Multi-view, Long time recording, video replay etc.
5
IP CAMERA User Manual
3 Appearance and interface
3.1 Appearance
Figure 1Note :
Power Indicator: it will turn RED if equipment was powered on. S t a t u s I n d i c a t o r : S l o w f l i c k e r( o n e p e r 2 s e c o n d) , i n d i c a t e s t h e d e v i c e i s
s e a r c h i n g f o r n e t w o r k ; f l i c k e r( o n e o r t w i c e p e r s e c o n d) , i n d i c a t e s t h e w i r e d network connected; Frequent flicker( 2~3 times per second) , indicates wireless network connected.
3.2 Interface of Equipment
Figure 2
1 ) P o w e r I n p u t S o c k e t : C o n n e c t D C a d a p t o r , i t s o u t p u t s h o u l d b e 5 V p o w e r
6
IP CAMERA User Manual
specification.
2 ) RESET Button: Press the RESET button and hold on more than 10 seconds, the equipment will restart and recover to the factory default settings.
3 ) WIFI Antenna Hole: Install the WIFI antenna.
4 ) R J 4 5 E t h e r n e t S o c k e t : R J 4 5 E t h e r n e t s o c k e t i s 1 0 / 1 0 0 M s e l f - a d j u s t . T h e equ ipmen t can connect t o a l l k inds o f ne twork equ ipmen ts , such as hub, rou te r,
switch, etc.NOTE: Factory setting IP is 192.168.0.178, the http port is 80, the username is admin, the password is 123456.
5 ) A u d i o I n p u t S o c k e t : A u d i o i n p u t s o c k e t i s d e s i g n e d f o r c o n n e c t i n g e x t e r n a l m i c r o p h o n e . T h e b u i l t - i n m i c r o p h o n e w i l l b e i n v a l i d a t i o n w h e n t h e e x t e r n a l microphone plugged in.
6 ) A u d i o O u t p u t S o c k e t : A u d i o o u t p u t s o c k e t i s f o r l i n e - o u t a u d i o p l a y e r , s u c h a s headphone, speaker, etc.
7 ) Alarm Output Socket
Figure 3The alarm output socket is connected with a relay in the IP camera. IP camera will control the switch to trigger the alarm bell or buzzer to alarm. The relay is able to co n t ro l t h e sw i t ch o f a a la rm wh ose vo l t age i s no more tha n 3 6V, and cu r ren t i s lower than 2A. Please refer to the Figure 3 for the connection of an external alarm.
8 ) Alarming Input Pin: Please re fer to the schemat ic Diagram of F igure 4 for how external detector collects alarm information.
Figure 4
Output Pins
Alarm power
Alarm
Switch
PIR
PIR Power
Input pins
Switch
7
IP CAMERA User Manual
The detector should be switched type (always on or always off). If the detector has detected the smoke or people or animal to enter the area, the detector wil l switch on or switch off. And it will send the external alarm signal into the IP camera.
4 Network Connecting
Figure 5
4.1 Connection InstructionB e f o r e v i s i t t h e I P C a m e r a , y o u s h o u l d f i r s t l y c o n n e c t i t t o t h e N e t w o r k , s u p p l y t h e
p o w e r t o i t , a n d c h e c k i f t h e l i g h t o f R J 4 5 S o c k e t i s n o r m a l t o m a k e s u r e a l l o f t h e communication links are fluent. The connection method is like as Figure 5.1) IP Camera-1 and IP Camera-2 are connected separately to 2 different LANs.2) And these 2 LANs are already connected to the Internet. In order to get the LANs to
be connected to the Internet, they are required to be equipped with router and to apply for the communication link from the local Internet Service Provider (ISP) and connect to it by ADSL or optical fiber, etc.
3) PC-3 is connected to the Internet.
4.2 Visit InstructionTo visit the IP Camera, you should do some settings of IP Camera and Internet besides getting the communication link fluency.
1) The PC and IP Camera are in the same LAN. If you want to use this PC to visit the IP Camera, you need to make sure their IP address is at the same segment.
8
IP CAMERA User Manual
Otherwise you need to do the reset of the IP Camera’s IP address. For example, t h e I P C a m e r a - 1 ’ s I P a d d r e s s i n F i g u r e 5 i s 1 9 2 . 1 6 8 . 1 . 1 3 9 ( a t t h e s e g m e n t o f 1 9 2 . 1 6 8 . 1 ) , w h i l e t h e P C - 1 ’ s I P a d d r e s s i s 1 9 2 . 1 6 8 . 0 . 1 7 5 ( a t t h e s e g m e n t o f 192.168.0), then you will be not able to visit the IP Camera through the PC-1. You
need to change the IP Camera-1’s IP address to 192.168.0.139 firstly.2) T h e P C a n d I P Ca m e ra a r e i n d i f f e r e n t L A Ns , b u t t h e y a r e a l l c o n n e c t e d t o
Internet. For the IP Camera-1 and PC-2 in Figure 5, if you want to visit IP Camera-1 by PC-2, you should firstly do the setting as 1) to make sure that you can visit IP Camera-1 through PC-1 and then do the setting of router-1 (do the port forwarding from the router). The PC-2’s vis i t appl icat ion could be sent through router-1 to IP Camera-1. Normally, PC-2 could only send the information to router-1, if you don’t do the setting of router-1, then PC-2 could not visit IP Camera-1.
5 Visit IP Camera from LAN
5.1 Set IP AddressThe IP addresses of IP Camera and PC should be at the same segment, for Figure 5, t h e I P C a m e r a - 1 c a n ’ t b e v i s i t e d . R u n t h e B S e a r c h _ e n . e x e i n t h e C D , c l i c k S e a r c h button, and then select the IP Camera-1 to reset the IP address, as the Figure 6.
Setting Instruction: Please carefully check the “Local PC information” on the top left corner which lists
the PC configuration. If there are several network adapters in the PC, please select the one you are using and make sure the IP address of IP Camera is as the same segment of the PC.
Change the content of “IP config” on the right to make sure the content is the same a s “ L o c a l P C i n f o r m a t i o n ” . O n l y t h e l a s t s e c t i o n o f t h e I P a d d r e s s w h i c h n e e d s setting by yourself, you can set it as 139 just like Figure 6.
If you don’t know how to f i l l out the content of “IP config”, you could also tick the “Set IP automatically” to get the IP address from the router automatically.
Put the user name and password into “Authentication” (By default, the user name is: admin, password is: 123456). Click “Update”. The setting will take effect now. S e l e c t t h e d e v i c e i n l i s t b o x , c l i c k “ B r o w s e ” b u t t o n , i t w i l l o p e n t h e B r o w s e r automatically and pop up a window at the same time which requires to inputting the user name and password. Then you see the home page of the IP Camera-1, click “English” on the right-top corner, just as below Figure 7.
9
IP CAMERA User Manual
Figure 6
If you have the firewall software in your PC, when you run the HSearch_en.exe, it may pop up a window to say if you want to block this program or not, then you should choose not to block.
IP Camera by default use fixed IP address 192.168.0.178 and fixed http port 80. If you don’t have this software, you could also press down the reset button to go back the factory setting. Then you could use this defaulted IP address to visit the IP Camera.
10
IP CAMERA User Manual
Figure 7
5.2 Visit IP CameraW e s u g g e s t u s i n g I E k e r n e l b r o w s e r t o v i e w t h e v i d e o ( i t c a n p r o v i d e m o r e functions ) , but user need to install Player before viewing the video. Click “download and install player (first use)” link, it will popup dialogue box as Figure 8, click Run, it will automatically download player and install.
Figure 8
After install the plug-ins, click “Mode 1 to view” link in Figure 7 to view the video (video as Figure 9).
11
IP CAMERA User Manual
Figure 9
1 ) Menu columnTh ere a re 2 k in ds o f men u , one i s ma in me nu , an d t he o th e r i s submen u . The ma in m e n u l i e s a t t h e t o p o f t h e i n t e r f a c e , i n c l u d i n g V i e w , N e t w o r k , A l a r m , M a i n t a i n ; Submenu lies on the left of the interface, and different main menu is in line with different submenu.
2 ) Video Displaying AreaV i d e o d i s p l a y a r e a i s a c c o r d i n g w i t h r e s o l u t i o n , t h e h i g h e r r e s o l u t i o n , a n d t h e l a r g e r display. Double cl ick left mouse in the video display area, i t wil l show full screen, and
double click again, it will go back to original size. Double click right mouse in the video display area, it will show green icon, click the left mouse, Pan/tilt will remote according to arrow signs.
3 ) Alarm indicator areaUp-right side is alarm indicator area, if device alarm, the green light will be in Red, and alarming.
4 ) Speaking and Video Control Area
I c o n s a r e a s f o l l o w : A u d i o , Ta l k , R e c o r d , a n d S n a p s h o t .
Click icons for related functions.
12
IP CAMERA User Manual
5 ) PTZ and video controlIn Pan/Ti l t control area, user can control the posit ion according to the arrow sign: up, down, left, right, middle, horizontal cruise, vertical cruise, and stop.User can also set the device resolution, brightness, contrast and other parameters.
6 Visit IP Camera from WAN
6.1 Port forwardingFollow the “Visit IP Camera from LAN” steps; make sure PC-1 can visit IP Camera-1. In Figure 5, before the computers in WAN (PC-2, PC-3) can visit the IP Camera-1, must p u t t h e I P C a m e r a - 1 i n t o W A N . Yo u c a n s e t p o r t f o r w a r d i n g o n R o u t e r - 1 t o p u t I P Camera-1 into WAN.
O p e n t h e R o u t e r S e t t i n g i n t e r f a c e o n P C - 1 . T h e i n t e r f a c e s f o r d i f f e r e n t r o u t e r s a r e different, and the port forwarding settings are different, please refer the router manual to set. For most routers, “Virtual server” option can be found in setting interface. Fill the IP address and port of IP Camera-1 into corresponding blank. Figure 10 is an example.
Figure 10S e l e c t “ s t a t u s ” o p t i o n a n d r e m e m b e r t h e W A N I P a d d r e s s , e n t e r t h e I P a d d r e s s i n browser of PC-1, if IP Camra-1 can be visited via PC-1, the port forwarding is success. And PC-2 and PC-3 can also visit the IP Camera-1.
WAN IP address is allotted by ISP, please make sure it’s an available WAN IP address. As WAN IP address is lack, many WAN IP address are available in limited area. If PC-2 and PC-3 are not in this area, the IP Camera-1 won’t be visited by them.
If user wants to put several IP Cameras into WAN, every device should set the port forwarding. In order to distinguish these devices, every device should set a different port. If the port of the device is not 80, should add the port to IP address with colon to visit the IP Camera. Example: http://202.96.82.177:81.
13
IP CAMERA User Manual
6.2 DDNSIn Figure 5, Router-1 get WAN IP address via ADSL, these WAN IP address is always changing, so, the IP address can’t be confirmed when visit the device in WAN. We need the dynamic domain name server (DDNS). IP Camera-1 send IP configuration to DDNS e v e r y f e w t i m e , D D N S c a n r e c o g n i z e t h e W A N I P a d d r e s s o f t h e r o u t e r - 1 w h i c h
c o n n e c t e d w i t h I P C a m e r a - 1 . T h e W A N I P a d d r e s s c a n b e s e a r c h e d o n D D N S b y domain name. Herein, domain name subst i tu te the dynamic IP address. I f the device can’t be visited by IP address, this domain name is also unavailable.
6.2.1 Manufacturer’s DDNSDevice manufacturer has established a DDNS, and allotted a dynamic domain name to every device, the domain name has been integrated into devices when producing. For e x a m p l e , e n t e r d o m a i n n a m e o f F i g u r e 11 , t h e b r o w s e r w i l l c o n n e c t t h e d e v i c e a n d display the IP address.
Figure 11The domain name is realized by forward manner, the domain name will change into the IP address and port number of the device when visit by domain name.
If the device can be visited by IP address but can’t be visited by manufacturer’s domain name, please check the DNS info is available or not and make sure the DNS setting is the same with the DNS setting of PC in LAN.
6.2.2 Third Party DDNSUser can also use third part DDNS, such as www.3322.org. User should apply a free domain name from this website and f i l l the info into the below blanks (Figure 12) and save the settings. Then the domain name can be used.
Figure 12The third party domain name is realized by analysis manner, the domain name will be displayed in the browser all the time when visit camera. If the port is not 80, the port number should be adding to the domain name with colon. Example: http://robbicam2.3322.org:81
14
IP CAMERA User Manual
7 Other Settings
7.1 Network Setting7.1.1 Basic Network SettingThe user can also enter the Basic Network Settings to set the IP address except using
the search software. See below Figure 13.
Figure 13
7.1.2 WIFI SettingI f t h e d e v i c e i s w i t h W I F I , e n t e r t h e W i r e l e s s L A N S e t t i n g , j u s t a s b e l o w F i g u r e 1 4 s h o w n , c l i c k t h e “ S e a r c h ” b u t t o n s e v e r a l t i m e s , i t w i l l s h o w y o u t h e w i r e l e s s n e t w o r k d e t e c t e d i n t h e W i r e l e s s N e t w o r k L i s t c o l u m n . S e l e c t o n e o f t h e m a n d t i c k “ U s i n g Wireless Lan”, then the relevant data of the selected wireless network will be shown in t h e f o l l o w i n g b l a n k s . P u t i n t h e p a s s w o r d a n d c l i c k “ S e t ” , t h e n t h e W I F I s e t t i n g i s finished.
Figure 14Note: When the device is connected both WIFI and wired, after it starts up, it will firstly
connect to the wired network, if it can’t connect to it, then it will change to connect the wifi. The IP address and port is the same, either wireless or wired network.
15
IP CAMERA User Manual
7.1.3 ADSL SettingU s e r c o u l d e n a b l e t h e A D S L D i a l u p a c c o r d i n g t o t h e b e l o w F i g u r e 1 5 ( T h e Telecom Operators will assign the user name and password to you when you apply for
ADSL service.) Connect the device directly to the ADSL modem and it is connected to the Internet, but don’t need to do the port forwarding.
Figure 157.1.4 UPnP SettingU P N P s t a n d s f o r u n i v e r s a l p l u g a n d p l a y, i f y o u s t a r t U P N P, o n c e t h e I P c a m e r a i s connected into the LAN, it will communicate with the router in the LAN automatically. It
will request the router to open a port to forward its own port. It is no need for the users to log in the router to set the port forwarding. Below Figure 16, tick “Using UpnP to Map Port” and the setting are completed. You could check the UpnP succeeds or not in the interface of System Maintenance.
Figure 16Before using UPNP funct ion, p lease make sure the router ’s UPNP funct ion has been triggered. Because there are so many different routers, and not all of them can support UPNP. Please test if the router work well with the equipment, if not, we would suggest you don’t enable this function.
7.1.5 DDNS SettingPlease refer to the content in 6.2.
7.2 Alarm Settings7.2.1 Alarm Setting1 ) Alarm DetectUser can select the motion detect to enable monitor a certain area, if anything happens i n t h a t a r e a , i t w i l l t r i g g e r t h e a l a r m . I n t h e m o t i o n d e t e c t s e n s i b i l i t y, t h e s m a l l e r t h e figure, the more sensitive it is.As showed in picture 4, if external alarm detector was connected to the device, user will be able to t ick the scheduler for alarm. I f the external alarm detector is an always on
switch alarm. Please choose “open”. If the external alarm detector is always off switch alarm, please choose “close”.
16
IP CAMERA User Manual
2 ) Alarm ActionAfter every tr igger of alarm during the scheduled t ime, the device can tr igger alarm in several ways. IO interface for a larm signal output : when relay was switched on (please refer to
Picture 3), the external alarm will begin to alarm. Send alarm info by email. Send the site pictures to the FTP server, user can also set the break time between
two pictures. Send alarm info to the alarm server.
3 ) SchedulerDevice wi l l t r igger alarm in scheduled t ime. User can set schedule t ime to be “al l the t ime” . P lease set the system t ime, t ime zone, and se lect the schedu led t ime. P lease
refer to the Picture 17.
Figure 17
7.2.2 Mail Service SettingThe device will send alarm email to the email address was filled in. Please do the mail s e t t i n g s p r o p e r l y f i s t , P i c t u r e 1 8 i s a m a i l s e t t i n g p a g e f o r y o u r r e f e r e n c e . A f t e r t h e setting, please click save and test to check if it works properly.
If have already set the mail server properly, user can tick to enable “Report Internet IP by mail”. After every restart, the device will send its Internet IP address to user’s email address. If this device has been port mapping to the Internet, then users can view the
17
IP CAMERA User Manual
device’s video through the Internet IP address.
Figure 18
Please make sure your email server open POP3 functions, or the mail can’t be sent.
7.2.3 FTP Service Setting
Figure 19When alarming, device will snap and send the image to FTP server, please make sure t h e F T P s e t t i n g i s c o r r e c t . A b o v e F i g u r e 1 9 o f F T P s e t t i n g f o r y o u r r e f e r e n c e , c l i c k setting to store the setting info and click test to check the setting.
After correct setting FTP server, you can use “upload Image Periodically” function. Even
18
IP CAMERA User Manual
no alarm, device can also send the snap image to FTP periodically.
In order to use FTP function, user should apply username and password on the FTP server first. And please apply some storage, and the authority to write and create sub-category into it.
7.2.4 Alarm Server
Figure 20Please conf i rm i f you have connected to alarm server. The alarm message format as follow:
GET /api/alarm.asp ?
username=username&userpwd=password&rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)&io=0
Alarm server need develop by customer , user can extend other functions on this server , like SMS , MMS alarm , and mobile phone etc .
7.3 Maintain7.3.1 Device Information
Figure 21
7.3.2 User SettingThere are three levels of authority; they are Administrator/Operator/Visitor. Administrator
19
IP CAMERA User Manual
have the highest authority, it can do any change to the settings. Operator account only can operate the IP camera, can’t do changes to the settings, and please refers to Figure23. Visitor account only can watch the video, can’t do any operation to the IP camera, and please refers to Figure 24. By default, the administrator’s user name is admin,
password: 123456.
Figure 22
Figure 23
20
IP CAMERA User Manual
Figure 24
7.3.3 Time SettingIf the device is connected to the Internet, you enable the NTP server to correct the time and select the right time zone. Or you should use the PC’s time to correct its time.
Figure 25
7.3.4 Other settingsYou can choose open or close indicator LED. If set PTZ center on start ‘Yes’, when start device, Pan/Tilt will move to center and then stop. You can also set the Horizon patrol r o u n d s a n d ve r t i ca l p a t r o l r o u n d s , w h e n y o u c l i c k p a t r o l o n t h e ‘ v i e w ’ i n t e r f a ce , i t w i l l round according to your setting rounds.
21
IP CAMERA User Manual
Figure 26
7.3.5 Firmware upgrade The device runs 2 kinds of programmer, one is system firmware, the other is application firmware. They could be upgraded separately.
Figure 27
7.3.6 Restore Factory Default Click “Restore Factory Default”, it will pop up a dialogue to confirm if you really want to restore the factory default. After confirmation, the system will restore the factory default and reboot.
7.3.7 User browsing LogAfter enter the log interface, you could view who and when the device is visited.
Figure 28
8 Centralization Control
IPCMonitor is a free software offered by factory, several devices on LAN and WAN can be browsed at the same time. The software also supports snap, video record, alarm andso on. The below Figure 29 is the interface.
22
IP CAMERA User Manual
For more information, pls. refer to the <<IPCMonitor User Manual>> in CD.
Figure 29
9 Technical Parameters
Item Sub Item DescriptionImage
CaptureSensor 1/4" CMOS sensor
Total of pixel 300k Minimum
illuminationIR on, 0 Lux
Lens f=4.5mm, F=2.0, Fixed IrisPan/Tilt Pan Coverage 350°
Tilt Coverage 70°Assistant Lighting Control 8pcs 850nm Infrared LEDs, 5m distance
Lighting Auto controlVideo and
AudioResolution 640*480(VGA)/320*240(QVGA)
Compression MJPEGFrame rate 30fps
Bit rate 128kbps ~ 5MbpsImage Rotation Mirror /Up-side down
OSD supportAudio Compression ADPCM
Network Basic Protocol TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、DDNS、 UPNP、 NTP、 PPPOE
Other Protocol 802.11b/g
Other Video control support
23
IP CAMERA User Manual
Features Dual way audio supportMotion Detection supportTriggered Actions Email/FTP/external alarm/send message to
alarm serverUser Setting Three levels
Date/ Time Setting supportUpgrade Upgrade from network
DDNS A free DDNS provided by manufacturerHardware Interface
Ethernet 10Base-T/100base-TXAlarm In 1 way
Alarm Out 1 wayAudio In Internal Mic and External Mic interface
Audio Out Audio Line-out interface x 1Physical
IndexWeight 343g
Main body 111mm(L)*107mm(W)*148mm(H)Power DC 5V
Power consumption <6WOperating
temperature0℃~ 45℃
Operating temperature
10% ~ 80% non-condensing
Software(PC Side)
OS Supported Microsoft Windows 98/2000/XP/VistaBrowser Internet Explorer6.0 and Above or Compatible
Browser, Firefox etc.Application Software
IPCMonitor
10 FAQ
1) Unmatched power adapter will damage the equipment or power adapter
When plug in the power adapter , please check carefully the voltage , it should be 5V adapter for this equipment.
2) Slowly browse speed
This equipment adopts MJEPG compression format, it needs large network bandwidth, the narrow bandwidth will affect the browse speed . The typical bandwidth uses situationas below:
640x480@10fps : 4.0 Megabits ~ 5.0 Megabits320x240@30fps : 1.2 Megabits ~ 1.6 Megabits
3) Color difference
The default is infrared lens, when visit outdoor or strong infrared light scenes, there are color differences, the color is not accordance to the real scenes. User can change it to
color lens to solve this problem, but color lens can only use under the daylight situation.
24
IP CAMERA User Manual
4) Can’t find equipment via search software after connect to LAN
Make sure the equipment and PC is in the same LAN; if install firewall software, please close it and try again.
5) Can find equipment via search software, but can’t visit
If the IP address of IP camera and PC is not in the same Network Segment, you should change them on the same Network Segment before visit. Network Segment is the f irst three number of IP address. If the IP address of PC is 192.168.0.100, so it can only visit the equipment which IP address is between 192.168.0.1~192.168.0.255.
6) Can’t visit the equipment via Internet
Please refer to:Chapter 4 (Figure 3) to check if the internet connection is correct; Chapter 5 to check if you can visit via LAN;C h a p t e r 6 t o c h e c k i f t h e p o r t f o r w a r d i n g i s c o r r e c t ; a n d c h e c k t h e r o u t e s e t t i n g i f i t forbid this equipment sending data to internet.
7) Can visit via public IP address, but can’t visit via manufacturer’s domain name
Make sure the DNS se t t ing i s same as your PC , as be low F igure 30 , in the search tool , the DNS 1 and DNS 2 on both side should be same.
Figure 30
25