Extremely reliable

Long service life

Highly economical

Innovative and only from WAGNER:

Pneumatic feed pumps

Paint feed made to measure!

B

G

L

K

H

I

M

D

E

F

AC

Pneumatic feed pumps

Powerful performance!

JAGUAR, LEOPARD, PUMA... Throughout industry, WAGNER feed pumps ensurean optimal, reliable paint supply . They convertenergy into perfect performance and provide aconstant, pulsation-free �ow of material – evenover great distances between paint room and pointof application.

The bene�ts!Particularly high delivery rates thanks to thelarge �uid section and powerful pneumatic motors.

Extremely kind to the paint material – thepumps only run when material is being taken fromthe piping network.

The innovation!With the pneumatic piston pumps the IceBreakerair motors provide decisive advantages forpractical use especially in continuous multi-shiftoperation.

The design re�nements have reduced the inevitable power losses due to icing down to aminimum . Interruptions of work due to the earlierneed for thawing out are now a thing of the past!

Easily maintained �uid sections reduce thedown times due to maintenance and cleaning to aminimum. Stainless steel quality ensures low wearand long service life.

Filter (option)

Pneumatic motor

Fluid section

The new WAGNER IceBreaker air motorMinimal icing, thanks to new internal geometry (A)The pneumatic control valve doesn't need any lubricating oilAbsolutely minimum pulsation to ensure a uniform paint feedSolidly built control housing (B) with integral silencer (C)Safety valve prevents over-pressurisation

Compact integral pressure regulator unitShut-o� / air bleed valve (D), pressure regulator (E), pressure gauge (F)

Constant power thanks to low-icingIceBreaker air motors!

Agro & Industrial Representations

Depending on the size of the plant and the area of application, WAGNER pneumatic feed pumps come in a variety of types and performance classes.

The high delivery rate (volumetric�ow per double stroke) runs from 130to 1200 cc , the working pressure(maximum operating gauge pressure)from 24 to 64 bar .

When choosing the right pumps manyfactors have to be considered.

To tal delivery rateN umber of application points Hose length and delivery head Type of materials being applied

play a very decisive role. On the following pages you will �nd all the feed pumps with their mostimportant performance data. You can get further information from the Product Information sheets or haveyour WAGNER specialist advises you personally and individually.

High economy thanks tofast maintenance!

In all classes, in a class ofits own!

50 % faster maintenance = greater economy!

Easily maintained �uid section!Can be serviced without dismantling the pumpEasily cleaned separating �uid chamber (G)Packing changed quickly without special toolsCompact build due to follower packings (H)Easily replaced: Large inlet (I) and outlet (K) valves for optimum material �ow

St ainless steel quality!All pump parts in contact with paint are made of stainless steelTungsten carbide valve seatsHard chromed pump piston (L)Self adjusting packings (M)

15 % fewer components = less wear!

3 year long term warranty! *Further convincing proof of the reliability and quality of the WA GNER piston pumps* excluding wear parts

Feed pump for large paint circulation systems, medium distances, low to mediumviscosities, high material throughput

Areas of applicationAutomotive industry and suppliers, commercial vehicle building, plastics andchemical industry

low to medium viscosity materialse.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents, adhesives

Feed pump for small and large paint circula-tion systems, mixing and dosing systems,medium material throughput

Areas of applicationAutomotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics industry, chemical andprinting industry

high viscosity materials e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents

Feed pump for large paint circulation systems,long distances and high delivery heads, highviscosities and material throughput

Areas of applicationAutomotive industry and suppliers, commercial vehicle building, plastics industry,chemical and printing industry

high viscosity materials e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents

Te chnical dataIntensi�cation ratio 9:1Volumetric �ow 1200 cc per double stroke 40.58 ozV nim/rtl 06rof emulo50 double strokes 15.85 gpmV nim/rtl 011emulomax. free outlet 29.06 gpmMax. working pressure 64 bar

928 psiAir inlet pressure 7.1 bar

103 psiAir consumption per double 80 nlstroke at 6 bar / 87 psi 2.81 cfmSound pressure level 83 dB(A) at max. permissible air pressure

Te chnical dataIntensi�cation ratio 4:1V cc 0021cirtemulo�ow per double stroke 40.58 ozV nim/rtl 06rof emulo50 double strokes 15.85 gpmV nim/rtl 011emulomax. free outlet 29.06 gpmMax. working pressure 30 bar

435 psiAir inlet pressure 7.7 bar

112 psiAir consumption per double 37.3 nlstroke at 6 bar / 87 psi 1.32 cfmSound pressure level 78 dB(A) at max. permissible air pressure

Te chnical dataIntensi�cation ratio 8:1Volumetric 600 cc�ow per double stroke 20.29 ozVolume for 30 ltr/min50 double strokes 7.9 gpmV nim/rtl 57 emulomax. free outlet 19.8 gpmMax. working pressure 62 bar

899 psiAir inlet pressure 7.7 bar

112 psiAir consumption per double 37.3 nlstroke at 6 bar / 87 psi 1.32 cfmSound pressure level 78 dB(A)at max. permissible air pressure

LEOPARD4-1200 LEOPARD8-600JAGUAR9-1200

Feed pump for small paint circulation systems, automatic application systems, mixing and dosing systems, low materialthroughput

Areas of applicationAutomotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics industry, chemical andprinting industry, general industry

high viscosity materials e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, releaseagents

Feed pump for small paint circulation systems, automatic application systems, mixing and dosing systems, low materialthroughput

Areas of applicationAutomotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics and chemical industry,general industry

low to medium viscosity materials e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, releaseagents, adhesives

Feed pump for small and large paint circulation systems, mixing and dosing systems, medium material throughput

Areas of applicationAutomotive industry and suppliers, woodand furniture industry, agricultural machineryand commercial vehicle building, machinemakers and plastics industry, chemical andprinting industry

low to medium viscosity materials e.g. water and solvent based materials, primers, pigmented top coats, clear lacquers,epoxy and polyurethane lacquers, emulsions,release agents, adhesives

Te chnical dataIntensi�cation ratio 3:1Volumetric 600 cc�ow per double stroke 20.29 ozVolume for 30 ltr/min50 double strokes 7.9 gpmV nim/rtl 57 emulomax. free outlet 19.8 gpmMax. working pressure 24 bar

348 psiAir inlet pressure 8 bar

116 psiAir consumption per double 16.5 nlstroke at 6 bar / 87 psi 0.58 cfmSound pressure level 78 dB(A)at max. permissible air pressure

Te chnical dataIntensi�cation ratio 8:1Volumetric 300 cc�ow per double stroke 10.15 ozVolume for 15 ltr/min50 double strokes 3.96 gpmV nim/rtl 05 emulomax. free outlet 13.2 gpmMax. working pressure 64 bar

928 psiAir inlet pressure 8 bar

116 psiAir consumption per double 16.5 nlstroke at 6 bar / 87 psi 0.58 cfmSound pressure level 78 dB(A)at max. permissible air pressure

Te chnical dataIntensi�cation ratio 3:1Volumetric 130 cc�ow per double stroke 4.4 ozVolume for 6.5 ltr/min50 double strokes 1.72 gpmV nim/rtl 03 emulomax. free outlet 7.9 gpmMax. working pressure 24 bar

348 psiAir inlet pressure 8 bar

116 psiAir consumption per double 3 nlstroke at 6 bar / 87 psi 0.11 cfmSound pressure level 78 dB(A)at max. permissible air pressure

PUMA8-300 3-130 SPUMA3-600

lortnoCxelF K23 ximilletnI

Drum siphon withagitator and intakesystem

Wall mount Base stand

Feed pump accessoriesWhether it's a simple wall mount or a drum siphonwith agitator, WAGNER o�ers an extensive range ofaccessories for stationary applications of feedpumps in paint feed systems.

Paint supply systemsWe design and build complete paint feed systems,right up to pipeline systems matched to your requirements.

Mixing and dosing systems Intellimix 4 for automatic applications with air atomisingguns or high-speed rotary atomisers, customizedsolutions and complex system solutions withcentral controlIntellimix 3 for universal use for automatic and manual applications in all application variantsFlexControl plus for versatile use in automatic and manual applications, almost unlimited possibilities in theincorporation of peripheral equipment, simpleoperationFlexControl for manual applications in all application variants. The best alternative to mechanical 2Ksystems with the simplest operation

With these mixing and dosing units WAGNER o�ersa powerful family of products which ideally suit thewidest range of industrial applications.

wag

ner.

aire

p.co

m.c

o

Carrera 50 FF No. 7 Sur - 13 PBX: 444 2820info@airep.com.co Medellín - Colombia

Agro & Industrial Representations

Feed pumps, accessories and more!