brochure 2016 - politec srl · outdoor perimeter protection of your property. over the years we...

2016

PERIMETER INTRUSION

DETECTION PIDs

BROCHURE

Politec Srl has the technology and the expertise to design and manufacture intrusion detection systems, offering the solution for the indoor and outdoor perimeter protection of your property.

Over the years we have developed a notable and innovative research and development re-source that enables us to meet the requirements of a challenging and demanding market and to adapt to our customers needs, who are ever more aware of a need of security.

Aware of the need to maintain competitive costs, our products employ cutting edge technology, which gives ever increasing quality and reliabi-lity, whilst not neglecting that the products have to be easy to use and install. For example the implementation of our SMA technology that al-lows a single person to align the beam and the RS 485 serial connection that allows local or remote programming and control via the ADE-BUS LAN control card.

We are focused in offering solutions to our cu-stomers to protect their property and lives tangi-bly making their security, comfort and the qua-lity of daily life better.

WS SMA - HIBRID SMA - SMA SOLAR are de-facto new product lines meeting all the market demands even for the most critical installation environments.

The quality of all our products are approved and certified and Politec is certified to ISO 9001: 2008.

POLITEC S.r.l.

GLOBE srl

CCEERRTTIIFFIICCAATTOOSSiisstteemmaa ddii GGeessttiioonnee

nn.. 11775588

PPrrooggeettttaazziioonnee ee pprroodduuzziioonnee ddii aappppaarreecccchhiiaattuurree

eelleettttrroonniicchhee ppeerr ssiisstteemmii aannttiinnttrruussiioonnee

Per informazioni puntuali ed aggiornate in merito ad eventuali variazioni intervenute nello stato della certificazione di cui al presente documento

contattare il n. +39-011-595863 o inviare e-mail a: [email protected]

If you need further information about changes of this certificate scope please call n. + 39 (0)11 595863 or send e-mail to: [email protected]

Eventuali esclusioni ammissibili sono riportate nel Manuale del Sistema di Gestione dell’organizzazione.

La validità del presente certificato è subordinata all’esito positivo delle verifiche di sorveglianza svolte con cadenza annuale.

The acceptable standard items exclusions are detailed on the company management handbook.

The validity of this certificate is subject to the satisfactory results of surveillance audits performed at least yearly

General Manager

PARVIS

WS e SMA WS

WIRELESS

TECHNICAL SPECIFICATIONS

HYBRID SMA

SOLAR SMA

pg.02

pg.28

pg.20

•PARVIS MES SMA•PARVIS DUAL SMA

SANDORpg.06

pg.24

•SANDOR PLUS SMA•SANDOR DUAL-QUAD-ESA SMA

MANApg.10

pg.26

•MANA IR SMA•MANA DT SMA•MANA MW

•SADRIN•SADRIN BIANCA

•ALES 60•ALES 120

•NAT SENSOR

•ADEBUS

•SADRIN WSI – WSE•SANDOR SMA WS •PARVIS SMA WS •ALES WS

•SANDOR SMA HY •PARVIS SMA HY

•SANDOR SOLAR SMA •PARVIS SOLAR SMA

SADRIN pg. 16

ADEBUS pg. 14

ALES pg. 18

NAT SENSOR pg. 19

2

PARVISAn outdoor security system with two different products, suitable for both for residential and industrial applications that integrates with the garden lighting.

PARVIS MES SMAAn invisible and discreet barrier is created by the active infrared beams, which are both pulsed and synchronized, fitted into an aluminium frame which is covered with a polycarbonate tube which has the diameter of standard lighting fixtures.Two different top housing covers are supplied, one permitting the beam towers to be closed with a flat top the other to fit any of various lighting solutions widely available. This and other special FEATURES carry European patents.Technical FEATURES make the beams extremely versatile. In addition to the usual and common signal outputs it is possible to select specific functions according to user needs. The electronics can be set up to discriminate the passage of small animals, thanks to the dual optic lens which works in AND, while, for example, it is possible to exclude the bottom two beams from a distance (directly from the alarm panel), allowing freedom of movement for small pets in the garden.A site of any form or length can be protected. The adjustable dual beams, 4 Tx max and 4 RX max per beam tower, can rotate 180 ° horizontally and 20 ° vertically. Easy one man alignment during installation or maintenance thanks to the unique SMA technology.The system can be easily controlled by simply connecting a power, sync and RS485 cable to all the beam towers and terminating the data cable in the ADEBUS, controller. Programming changes, the set up and other neces-sary information can be downloaded to the Alarm Control Panel.PARVIS MES SMA is compatible with SANDOR PLUS SMA and MANA IR SMA, and as necessary can be an integral part of the same system peri-meter. The beam tower can also be assembled as a TERMINAL TX only or RX only tower.

STANDARD MODELSPARVIS MES 9000 S Technical specifications pg. 28.

EUROPEAN PATENT

“Parvis ensures your peacefulness.”

Technical specifications pg. 28

PARVIS DUAL SMAEmploying the same single beam tower philosophy, but with two dual beam TX and two dual beam RX units, this lower feature ver-sion of the previous beam, can be used to protect a site of any form or length. Optical sync with 4 different channels, Beams can be selected to operate in either parallel or crossed mode and ha-ving an alarm condition when there is either a single beam break (OR mode) or multiple simultaneous beam breaks (AND mode). Employs IR beams and electronics from the SANDOR DUAL SMA making it compatible in TERMINAL mode.PARVIS DUAL SMA is not compatible with PARVIS MES SMA and cannot be connected to the RS485 bus.

STANDARD MODELSPARVIS DUAL Technical specifications pg. 28.

3Technical specifications pg. 28

4

Adjustment Angles SECTION MAINSLAMP CABLING

POB 30NEW WIRING

POTHOLE

TERMINATION WITH FLAT CLOSURE PLATE (WITHOUT LAMP)

PARVIS MES SMASMA technology (Single Man Alignment) permits single operator alignment, high brightness LEDs and a buzzer on each beam, permits the operator to attain the ma-ximum alignment value without the use of additional instrumentation. The feature is easily activated using the button situated near each beam optics. The RS 485 output allows for the centralization of the system.Optical sync operation option.

The RP version indicates Parallel Beams, allowing a single barrier or perimeter with two beam towers to be constructed having a maximum of 8 beams per leg.

PARVIS SMA

FEATURES• Outdoor Range 100 m.• Random delay.• Parallel or Crossed Beams.• Environmental Module Built In with OC output.• OR (any Beam)- Random AND (any two beams) –or First two beam activation.• Exclusion of the 1st or the 1st two beams.• Optical or wired sync.• Antimask detection with OC output.• Crawl detect on bottom beam• Adjustable Response time .• 4 beam optical beam sync.• Exclusion LEDs.• RS485 Connection (only with wire synchronism)

Image 8 Beams - Single Barrier

Image 8 Beams – Simple barrier

Image 8 Beams - Crossed Barrier

PARVIS RP connection detail

5

PARVIS DUAL SMAParvis DUAL SMA is made up from 2 TX and 2 RX units housed in a single beam tower.Having 4 Sync channels the SMA technology permits the use of more beams on the same leg.

PARVIS DUAL SMA

DUAL OPTICS SMA

HIGH INTENSITY LEDSVISIBILE UP TO 200M

BUZZER

SMA TX – RX Optics

PUSH BUTTON ACTIVATED ALIGNMENT

FEATURES• Outdoor Range 100 m.• Crossed Or Parallel Beams• Optical Channel Sync Selector.• Environmental Module.• OR or AND Operation• Supply Voltage 10-30 Vdc.• Heater Voltage 10-30 Vac/Vdc• Adjustable Response time.

PARVIS DUAL

PARVIS DUAL

DUAL SMA

6

SANDORSANDOR PLUS SMAThe barrier is housed in a small attractivel designed anodized aluminium frame with polycar-bonate front. Typical applications are wall/window protection or pole mounted (using the appropriate brackets) for standard perimeter security. Inside are the same PARVIS MES SMA and MANA IR SMA, electronic boards and optical beams, hence being compatible with them and can be used to meet the needs of the perimeter systems. (See specifications).Anche SANDOR PLUS SMA, can also be connected the serial RS485 Bus and centrally con-trolled via the ADEBUS.

SANDOR DUAL - QUAD - ESA SMABorn from the traditional philosophy of twin Beam Towers one housing the TX units the other the RX units. Designed especially and recommended for the protection of large wall areas with windows, thanks to the long range and selectable parallel or cross pattern beams which form a “web” of detection. The signal emitted from any transmitter is received by all the receivers.This range of beams is also equipped with SMA technology, offering the same advantages whilst aligning the optics during installation or maintenance.Optical beam synchronisation is available on four different channels.The alarm condition can bet set with either a single beam break (OR) or simultaneous break in any two beam (Random AND) only in the QUAD and ESA models, this function can also be remotely controlled from the alarm panel.The two beam towers that make up a pair of SANDOR DUAL SMA are compatible with the PARVIS DUAL SMA when used in TERMINAL MODE. SANDOR DUAL – QUAD – ESA SMA are not compatible with SANDOR PLUS SMA and cannot be connected on the RS485 bus.

STANDARD MODELSSANDOR PLUS Technical specifications pg. 29.SANDOR DUAL – QUAD – ESA Technical specifications pg. 29.

“Secure Protection”

Technical specifications pg. 28 e 29

AVAILABLE ALSO IN WHITE

(reduced outdoor range)

7

AVAILABLE ALSO IN WHITE

(reduced outdoor range)

8

“The Small Beam With The Long Reach”

HORIZIONTAL ADJUSTMENT ANGLES 180°

VERTICAL ADJUSTMENT ANGLES 20°

SAN/SDWALL MOUNT

SAN/PLWALL MOUNT

SAN/PLPOLE MOUNT

BRACKET ONA BAR INSTALLATION

SANDOR PLUS SMA

NEW ENCLOSURE WITH4 CABLE GLANDS

SMA technology (Single Man Alignment) permits single operator alignment, high brightness LEDs and a buzzer on each beam, permit the operator to attain the maximum alignment value without the use of additional instrumentation. The feature is activated simply by a button placed near each beam optics. The RS 485 output allows for the centralization of the system. Beam optics can be synchronised.

FEATURES• Outdoor Range 100 m.• Random delay.• Parallel or Crossed Beams.• Environmental Module Built In with OC output.• OR-Random, AND or First two beam activation.• Exclusion of the 1st or the 1st two beams.• Optical or wired sync.• Antimask detection with OC output.• Crawl detect on bottom beam• Adjustable Response time.• 4 beam optical beam sync.• Exclusion LEDs.• RS485 Connection (only with wire synchronism)

SANDOR PLUSSANDOR PLUS

TX

RX

TX

RX

TX

RX

TX

RX

SANDOR PLUS SANDOR PLUS RP

TX

TX

RXRX

TXTX

RXRX

TXTX

RXRX

TXTX

RXRX

TX

RX

RXTX

TXRX

RXTX

TXRX

RXTX

TXRX

RXTX

RXTX

RXTX

RXTX

RXTX

9

DUAL SMA

SANDOR DUAL-QUAD-ESA SMA

SMA TX – RX OPTICS


DUAL OPTICS SMA


BUZZER

FEATURES• Outdoor Range 100 m.• Crossed Or Parallel Beams• Optical Channel Sync Selector.• Environmental Module.• OR or AND–Random (any two

beam) activation..• Supply Voltage 10-30 Vdc.• Heater Voltage 10-30 Vac/Vdc• Adjustable Response time

Quad 4 parallel or 16 crossed beams

Esa 6 parallel or 36 crossed beams

Dual 2 parallel or 4 crossed beams

SANDOR DUAL – QUAD – ESA SMAIt is a barrier composed of 2 distinct beam towers TX and RX and allows the use of multiple barriers along the same leg, being equipped with 4 different frequency channels.

ESA SMAQUAD SMA

TX

TX

TX

RX

RX

RX

10

“Single or dual technology Long Range Barrier”

MANA

Technical specifications pg. 29 e 30

The MANA range of beams have a 250 meter range, designed for outdoor protection of large sites, can be composed and configured to match the installation requirements and the level of security required; only microwave, only active infrared or combined “dual technology”.Each section has an independent alarm output, controlled from the Alarm panel in AND or OR mode. Sturdy aluminium construction with a polycarbonate cover, with a base set up for; floor or pothole mount or optionally wall mount using the supplied accessories. Power supply 220V.

MANA IR SMAActive infrared barrier with the same functional characteristics of PARVIS MES SMA and SANDOR PLUS SMA, equipped with the same 100 meters optics or optionally with larger and more powerful optics in order to achieve the longer ranges as required, compatible with and deployable in any perimeter intruder detection system according to the perimeter needs. (See specifications).The MANA IR SMA,can also be connected on the RS485 bus and be centrally controlled by the ADEBUS.

MANA DT SMAIt is a combination of the previously described IR and MW described below, typically housed in a pair of beam towers, one with a microwave TX and 4 IR Beam TXs and in the other the microwave RX and 4 active infrared RXs.The MANA DT SMA, can also be connected to the RS485 serial bus and be controlled central-ly by the ADEBUS. ADEBUS system. The TX Tower, whilst only having a single tamper alarm output is connected to the bus in order to consistently provide any technical faults and reports, such as power, temperature, etc. In the RX tower are all the alarm outputs relative to the active infrared, as well as technical fault reports, the alarm output of the microwave is connected to one of the three inputs on the terminal PCB. The microwave alarm is signalled, via the RS485 BUS, to the ADEBUS where it is assigned an alarm relay for connection to the alarm panel.

MANA MWMicrowave barrier working at 24GHz in the K band, complete with cavities and 200mm pa-rabolic antenna and 4 different channels, allows considerable penetration of the field giving long range but with a very small diameter lobe, allowing installation in areas with limited free space. Calibration and testing is simplified thanks to the onboard LED array and the digital voltmeter located at the receiver.

STANDARD MODELSMANA IR Technical specifications pg. 29.MANA DT Technical specifications pg. 30.

ALIMENTAZIONE RISCALDATORI

A 12 O 24 Vac / Vcc

MANA DT3 TRIPLE TECHNOLOGYFOR DEAD ZONE COVERAGE

MANA DT3 Triple TechnologyThe microwave and dual technology barriers are composed of a pair of columns which during installation must be positioned in such a way as not to leave a dead spot at the beam extremities, typical of microwave barriers. If however the tower cannot be installed without dead zones then a curtain coverage Doppler microwave detector can be installed in each tower to cover the dead zones. The alarm output of the Doppler detector can be controlled as desired to satisfy installation requirements. In this case the alarm output of the Doppler detector is connected to one of the three inputs on the terminal PCB in the MANA DT SMA tower which is in turn connected to the ADEBUS, system bus, and hence controlled independently at the alarm panel.

11

12

MANA IR SMA

MANA IR SMASMA technology (Single Man Alignment) per-mits single operator alignment, high bright-ness LEDs and a buzzer on each beam, permits the operator to attain the maximum alignment value without the use of additional instrumentation. The feature is easily activa-ted using the button situated near each beam optics.The RS 485 output allows for the centraliza-tion of the system.The beams can be synchronised.

The MANA IR SMA barriers can be configured as required such as in the picture, where there are three optics for three different protection zones.

SMA TX – RX OPTICS


FEATURES• Outdoor Range 100 or 250 m.• Random delay.• Parallel or Crossed Beams.• Environmental Module Built In with OC output.• OR-Random, AND or First two beam activation.• Exclusion of the 1st or the 1st two beams.• Optical or wired sync.• Antimask detection with OC output.• Crawl detect on bottom beam• Adjustable Response time .• 4 beam optical beam sync.• Exclusion LEDs.• RS485 Connection

THERMOSTATICALLYCONTROLLER HEATERS

TERMINAL BLOCK WITHRS485 OUTPUT

230VACSUPPLY INPUT

SPACE FORA 7AH BATTERY

Active Infra Red

HIGH INTENSITY LEDS VISIBLE AT 500mBUZZER

13

MANA DT SMA

MANA BHBATTERY SHELF

MANA MW

MANA DT SMA E MANA MW

MANA DT SMAA TX & RX tower pair with both active IR and MW components.In the event of critical ambient or weather condi-tions the outputs from the two independent com-ponents can be controlled separately, guaran-teeing system operation continuity.

MANA MWAn electronic control board installed In the RX to-wer and is equipped with all the necessary instru-mentation to simplify the operations of installation. The coloured LED array displays the optimal ali-gnment, whilst on the digital display you can read the voltage values during calibration, a powerful Buzzer can be activated during the walk-test.

THE ENTIRE MANA RANGE CAN BE SUPPLIED WITH POLE OR WALL FIXINGS ON REQUEST, REMOVING THE LOWER MOUNTING BASE.

Active Microwave

Active Microwave and IR Beams combined

LED ARRAY ALIGNMENT TEST METER

BUZZER WALK-TEST

MANA FORREINFORCING BRACKETS

MANA AC TOPANTI-CLIMB COVER

MANA SDWALL MOUNT OR EXTERNAL MOUNT

BRACKET

POB 30NEW WIRING

POTHOLE

14

Control panelADEBUSComplete with management software and GIU.RS485 BUS field communications.PC connected in LAN.LAN/ETHERNET-TCP/IP.Up to 32 towers can be controlled.Maximum serial cable length 1 KmSecond serial board (optional)Seven outputs on the ADEBUS boardSix programmable 16 relay output boards (optional)Metal housing complete with power supply

All the system parameters can be accessed and or modified, 32.000 event memory is downloadable to pc.

Controles: MANA IR SMA, MANA DT SMA, PARVIS MES SMA, SANDOR PLUS SMA.

•State of each single optical beam:•Alarm, Environmental output, anti-masking.•Power supply values.•Alignment signal value.•External temperature.•Heater Activation.•AND/OR operation operation select.•Environmental output select.•Exclusion select.•Crawl detection select.•Random delay select.•Serial BUS status.•Tower tamper status.•Single event memory.

15

32 TOWERS MAX

MAX 1 KM MAX 1 KM

MASK EXAMPLE

CONFIGURATIONS AVAILABLE

EDCBA

SECTORING SYSTEM TO CONTROL SPEED DOME CAMERA

RANGE FROM 50 TO 250M

FOR

CO

LUM

N W

ITH

H

EIG

HT

OV

ER 2

,5M

16

“Relax, there’s Sadrin”

SADRINSADRINMiniaturized beam tower specially designed and recommended for the protec-tion of doors and windows thanks to the category leading long range. They can be used, if necessary with the adjustable brackets, to protect very large areas provided they are not directly exposed to the elements.The beams employ cable synchronization and are housed in an anodized alu-minium frame with a polycarbonate front.Ease of installation and programming thanks to the automatic alignment, the beams also offer high immunity to sunlight and to false alarms in general. Each beam is made up of a dual optics which operate in AND, whilst it is possible to program the alarm output to function in OR, a single beam with adjustable response times or with a random AND operation where any 2 or more beams must be broken.The two dual beams, situated on the CPU motherboard can be increased to a maximum of 10 using flat cables of various lengths depending on the tower height; standard or bespoke.

SADRIN BIANCA (White)As the previous Beam but with the aluminium housing painted white, which limits however the range to 5 Metres.

Sadrin

TX RX


SADRIN SADRIN BIANCA(White)

FEATURES• Outdoor range 15 m (Black), 5 m

White.• OR- Random AND (any two beams).• Adjustable Response Time.• Exclusion LEDs.• Expandable up to 10 dual beams.

17

180°

SADRIN SD180°

ADJUSTABLEBRACKET

NEW PROFILECLOSURE CAPS

WALL MOUNT FIXING HOLES

COMPLETE WITHENVIRONMENTAL SEALS

18

“The New Single Beam”ALESEmploying high brightness LEDs (visible over 200m in broad daylight)and high power Buzzer, the barrier can be set up perfectly by a single operator who can see and hear when the beam signal is at its maximum, ensuring optimum operation. The Beam is supplied with pole and / or wall mount brackets and can be installed externally thanks to the IP65 protection, alternatively removing the front cover they can be housed in any standard beam tower.Single beam with dual optics which gave rise to the SMA technology, the special feature that allows “One Man” installation and alignment.Employing high brightness LEDs (visible over 200m in broad daylight)and high power Buzzer, the barrier can be set up perfectly by a single operator who can see and hear when the beam signal is at its maximum, ensuring optimum operation. The Beam is supplied with pole and / or wall mount brackets and can be installed externally thanks to the IP65 protection, alternatively removing the front cover they can be housed in any standard beam tower.Available also in white version, but with reduced range.

FEATURES: • 60 metre/120 metre range • Optical Sync with 4 different channels• Dedicated Environmental output• Adjustable Response Time.• 180°H. and 20°V. Adjustment.• 10 a 30 Vdc Power requirement.• Thermostatically controller heaters (option)• 10 - 30 Vac/Vdc Heater Power Requirement


BUZZER

ADJUSTMENT ANGLESHORIZONTAL180°

ADJUSTMENT ANGLESVERTICAL 20°


ALES TS OPTIONAL

THERMOSTAT KIT

MOUNTING BRACKET

KIT INCLUDED

19

FEATURES: • 1 to 12 m adjustable range• AND/OR operation• Antimask PIR/MW• Walk-test

“Mini Dual technology detector with adjustable range curtain coverage”

NAT SENSOR

Dual technology detector suitable for protecting small openings such as windows and doors thanks to its very compact size, installed in the upper corner either ho-rizontally or vertically. Technical features, both electronic and mechanical, such as: adjustable range, anti masking, thermal self-compensation, Critical weather self-compensation (hail, rain, etc.), IP65 protection and a useful mounting kit, result in high false alarm immunity and is suitable for the protection of outdoor façades.Other dip-switche settable functions are: 100Hz filter, Pulse count OR mode etc.

33mm

40mm

135mm


CABLE ENTRY

WALL TAMPER

MICROWAVE RANGE

ADUSTMENT

MW

PIR

INFRA RED RANGE

ADJUSTMENT

ANTIMASK

RAIN SENSOR

AND/OR PULSE COUNT

AND ANTI-MASK

LEDs

ANTIMASK

MOUNTING BRACKET IN

STAINLESS STEEL

20

WIRELESSSADRIN WSI - WSEMiniaturised beam column, specifically designed for the protection of doors and windows, like the SADRIN but self-powered, compatible with the most common radio alarm transmitters on the market, thanks to the low power consumption bistable NC relays used for the alarm and tamper outputs.Easy installation and programming, thanks to SMA technology, which in ali-gnment test, recognizes in automatic way the number of beams and optical alignment Sync, to which follows the walk test able to check operation of every beam. Each beam has dual optics working in AND, the alarm output can be programmed in OR single beam with different response times or in random AND, requiring any two beams to be interrupted. 10m range, with special filter, which guarantees an high immunity to sunlight and false alarms.SADRIN WSI includes in the tower one or more lithium battery packs, to reach the requested autonomy, possibility to add them at any point of the co-lumn, thanks to same flat connector as expansions.SADRIN WSE includes for each tower one tamper protected housing which plugs directly into the top of the beam tower, designed to house high power batteries and the radio transmitters.The two dual beams, situated on the CPU motherboard can be increased to a maximum of 8 using flat cables of various lengths depending on the tower height; standard or bespoke.The 1 to 3 year battery duration is dependant on the number of beams and the type of batteries used. In low battery conditions an audible warning is given on interruption of the beams. In case of completely discharged battery, an alarm will be activated by a security micro relay on board.

3m is the max range of full White version.

SADRIN WSI SADRIN WSE

Sadrin WS

TX RX


SADRIN BHADDITIONAL

BATTERIES CASE KIT FOR WSI

FEATURES: • Outdoor Range: 10 mt. with black window 3 mt. with white window• Self-recognition optics during calibration• Expandable up to 8 dual beams• OR – random AND with any two beams • Adjustable Response Time• Low Battery indication• Optical Tamper transmission from TX to

RX• Walk-test function

WSE version tamper pro-tected housing for higher capacity battery and radio transmitter.

BATTERY LIFE 1 TO 3 YEARS

21

ALES WS

DEEP REAR HOUSING FORBATTERIES AND RADIO TRANSMITTER

ALES WSThe evolution of ALES 60 and 120 single beams employing the well known SMA technology, single self powered 50 metre range version, supplied with a rear housing which houses the batteries and commonly used for radio transmit-ter. Optical sync with 4 different channels, environmental output is available but to keep power consumption low thermostatically controlled heaters cannot be used. The TX tamper alarm is optically relayed to the RX giving separate alarm and tamper outputs. 36 Month battery life is guaranteed and there is an audible low battery warning during beam interruption. An alarm condition is generated in the event of the batteries being completely discharged thanks to the “fail in alarm” micro relay.


FEATURES • Outdoor Range 50 m• Environmental output• 4 Channel Optical Sync• TX tamper relayed to the RX• Adjustable Response Time• Low Battery indication

“New wireless detector with SMA technology”

3 YEARS BATTERY LIFE

22

“New wireless detector with SMA technology”

SANDOR SMA WSThe SANDOR SMA WS range of barriers is made up from two, TX & RX, beam towers. The new electronics using AUTO RECOGNITION OF THE OP-TICS can control 2 to 6 beams each with dual optics and SMA technology. The state of the art electronics guarantee better reliability and reduced power consumption with up to 36 months battery life, which can vary depending on the number of beams installed in the columns. Optical sync is employed and the range is limited to 50metres to keep false alarms to a minimum in critical weather due to not being able to instal heaters for obvious reasons. OR / AND operating, Response time and Environmental output functions are set using the dip switches. The separate alarm and tamper outputs can be connected to commonly used radio transmitters, which are housed in the RX column. The TX column tamper alarm is relayed optically to the RX. An audible low battery warning is given during beam interruption. An alarm condition is generated in the event of the batteries being completely discharged thanks to the “fail in alarm” micro relay.The low battery and environmental outputs can remotely controlled using the dedicated outputs on the control board.Two or three beam SANDOR SMA WS towers are compatible with PARVIS SMA WS 2+2 o 3+3.

Sandor SMA WS

SAN/SDWALL MOUNT

SAN/PLWALL MOUNT

SAN/PLPOLE MOUNT

RX OPTICS SMA

BRACKET ONA BAR INSTALLATION


RX MOTHER BOARD

WIRELESS

TAMPER

FEATURES• Outdoor Range 50 m• Low Battery indication• Environmental Module• Crawl Detect• OR – Random or First Two Beams

AND• Beam 2-3-4-5-6 selector• Adjustable Response Time• TX tamper relayed to the RX

LAMP FITTINGCLOSURE PLATE

TX RX

3 YEAR BATTERY LIFE

23

PARVIS SMA WS 2 PARVIS SMA WS 3

PARVIS SMA WSThe PARVIS SMA WS range maintains the Single Tower philosophy where the dual optic beams both TX and RX are housed in a 2 + 2 or 3 + 3 configuration, complete with AND operation and SMA technology. The new generation control cards “automatically find“ the beam optics and have high perfor mance com-bined with low power consumption. 36 months average battery life, based on the number of beams installed in the columns. Optical sync is employed in this range of beams and the range is limited to 50metres to keep false alarms to a minimum in critical weather due to not being able to instal heaters for obvious reasons. The OR / AND, Response time and activation of environmental output functions are dip-switch programmable. The alarm and tamper alarms have two separate outputs for connection to the most common radio transmitters on the market. An audible low battery warning is given during beam interruption. An alarm condition is generated in the event of the batteries being completely discharged thanks to the “fail in alarm” micro relay.The low battery and environmental outputs can be controlled remotely using the dedicated outputs on the control board.Since the features and functions are identical to SANDOR SMA WS, range of barriers, these units can be used in 2 + 2 or 3 + 3 configurations in TERMINAL mode.


FEATURES• Outdoor Range 50 m• Low Battery indication• Environmental Module• Crawl Detect• OR – Random or First Two Beams AND• Beam 2-3 selector• Adjustable Response Time• TX tamper relayed to the RX

POB 30NEW WIRING

POTHOLE


FLATCLOSURE

PLATE

TX MOTHER BOARD

RX MOTHER BOARD

3 YEAR BATTERY LIFE

24

HYBRID SMA

SANDOR SMA HYThe TX column tamper alarm is relayed optically to the RX. An alarm condition is generated in the event of the batteries being completely discharged thanks to the “fail in alarm” micro relay. The low battery and environmental outputs can controlled remotely using the dedicated outputs on the control board. The SANDOR SMA HY range of barriers exactly mirrors the WS range for features and functions, and as such are twin TX and RX beam towers. The new electronics with AUTO RECOGNITION OPTICS can control 2 to 6 Dual lens optics with SMA technology. State of the art electronics, has allowed to obtain better results in terms of reliability and also lower power consumption. The uniqueness of this range of beam towers is given by the fact that inside the columns is hou-sed a small power supply with rechargeable battery backup giving 3 months of operation. The dual-feed power supply, 3,6Vdc for the electronics and 12Vdc for thermostat temperature control, guarantees optimum operation of the bar-riers in any atmospheric condition, and with a range of up to 100 meters. In the event of a power outage the back up batteries only power the electronics automatically excluding the heaters. This means that there is no immediate need to restore the electricity network, if it were to fail, for example, in remote holiday homes. The two separate alarm and tamper outputs are available for connection to the most radio transmitters common on the market and are hou-sed within the columns RX. The TX tower tamper alarm is optically relayed to the receiver tower. The low battery and environmental outputs can controlled remotely using the dedicated outputs on the control board. An alarm condition is generated in the event of the batteries being completely discharged thanks to the “fail in alarm” micro relay.The 2 or 3 beam pair SANDOR SMA HY towers are compatible with 2+2 or 3+3 PARVIS SMA HY hy beam tower configurations.

“New Wireless Beam With Rechargeable Batteries And Heater Power Supply”


FEATURES• Outdoor Range 100 m• Low Battery indication• Environmental Module• Crawl Detect• OR – Random or First Two Beams AND• Beam 2-3-4-5-6 selector• Adjustable Response Time• TX tamper relayed to the RX• 230 Vac Power Supply• Rechargeable Battery• Heater Power supply

Sandor SMA HYBRID

RX OPTICS SMA

RX MOTHER BOARD

POWER SUPPLY IN 230 V OUT 12 Vcc

TX RX

3 MONTH OPERATION IN THE EVENTOF 230 VAC POWER OUTAGE

25


PARVIS SMA HYThe same single column philosophy where the TX column and the RX column houses 2 or 3 dual beams, depending on column height,which allows a site of any size or shape to be protected. All the features and functions are the same as those in the SANDOR SMA HY, range of beams; therefore they are compatible with the 2 or 3 beam pairs in TERMINAL mode.

Adjustment AnglesPARVIS SMA HY 2

PARVIS SMA HY 3


FEATURES• Outdoor Range 100 m• Low Battery indication• Environmental Module• Crawl Detect• OR – Random or First Two Beams AND• Beam 2-3 selector• Adjustable Response Time• TX tamper relayed to the RX• 230 Vac Power Supply• Rechargeable Battery• Heater Power supply

POB 30NEW WIRING

POTHOLE

POWER SUPPLY IN 230 V OUT 12 Vcc

FLATCLOSURE

PLATE

TX MOTHER BOARD

RX MOTHER BOARD

3 MONTH OPERATION IN THE EVENT OF 230 VAC POWER OUTAGE

26

FLEXIBLE SOLAR POWER SUPPLY


“New wireless system with rechargeable solar panel”

FEATURES• Outdoor Range 50 m• Low Battery indication• Environmental Module• Crawl Detect• OR – Random or First Two Beams AND• Beam 2-3-4-5-6 selector• Adjustable Response Time• TX tamper relayed to the RX• Solar Power Supply

SOLAR SMA

SANDOR SOLAR SMASMA SOLAR is a further system development, taking advantage of the alternative energy of the sun. These barriers are equipped with a mini Film-solar panel fitted to the top of the tower to keep the batteries, housed in the column, constantly charged, capable of powering all the electtronics and all the optics. The barriers are always the WS type with 2 to 6 beams, optical sync and maximum range of 50 meters and connected the alarm panel with commercially available radio transmitters for the alarm and tamper signals. The duration of the batteries, whilst lower than that of the batteries used in the WS SMA, is guaranteed for at least 3 months, taking into consideration periods of no or low sunlight.An alarm condition is generated in the event of the batteries being completely discharged thanks to the “fail in alarm” micro relay. The low battery and envi-ronmental outputs can controlled remotely using the dedicated outputs on the control board. The two columns that make up a pair of 2 or 3 beam SANDOR SOLAR SMA barrier is compatible with the 2 + 2 or 3 + 3 PARVIS SOLAR SMA barrier.

SANDOR SOLAR SMA

RX MOTHER BOARDRX OPTICS SMA

TX RX

-3 MONTH OPERATION BETWEEN CHARGE-RECHARGE FROM SOLAR PANEL WITH ONLY 20% OUTPUT

27Technical specifications pg. 33

FEATURES• Outdoor Range 50 m• Low Battery indication• Environmental Module• Crawl Detect• OR – Random or First Two Beams AND• Beam 2-3 selector• Adjustable Response Time• TX tamper relayed to the RX• Solar Power Supply

PARVIS SOLAR SMAThe same features as the SANDOR SMA SOLAR but in a PARVIS housing and with a single column philosophy containing both transmitters and receivers and with a maximum of 6 beams in total because of power consumption con-straints, this means that if necessary the 2 + 2 or 3 + 3 configuration PARVIS SOLAR SMA can be paired with 2 or 3-beam SANDOR SOLAR SMA towers in TERMINAL mode.

PARVIS SOLAR SMA 2 PARVIS SOLAR SMA 3

POB 30NEW WIRING

POTHOLE

NOTE: THE SOLAR PANEL CANNOT POWER THE 230V LAMP

FLEXIBLE SOLAR POWER SUPPLY


FLATCLOSURE

PLATE

-3 MONTH OPERATION BETWEEN CHARGE-RECHARGE FROM SOLAR PANEL WITH ONLY 20% OUTPUT

28

SPECIFICATIONS

COMPARISON OF “NON SMA” BEAM SPECIFICATIONS

PARVIS MES SMA PARVIS MES

PARVIS DUAL SMA PARVIS DUAL

Max range indoor 400 m 400 m 300 mMax rang outdoor 100 m 100 m 80 mAlignement technology SMA STD SMA STDSynchronism wired or optical wired optical 4 channels optical

Dual lenses beams YESPhotodevices Pulsed 950nM beamsConfigurations in a barrier 2-3-4TX + 2-3-4RX 2TX + 2RX

Beams Alignment parallel or crossed parallel parallel or crossed crossed

Minimal distance from TX and RX No limit with parallel configuration, with crossed configuration 4 ÷

8m depending of n. of beams and height

no limit No limit with parallel configuration, with crossed configuration 4 ÷


4 ÷ 8m depending of n. of beams and height

Settable operation mode OR - AND RANDOM - AND 1° and 2° beam OR - AND

Settable beams exclusion 1° or 1° and 2° beam NO NOAnti crawling function on first lower beam YES YES NO NOColumn supply 10-30 Vdc 13,8 Vdc 10-30 Vdc 13,8 VdcCircuit consuption 135÷150 mA depending on n of beams

Heaters supply 10÷30 Vac - Vdc 24 Vac 10÷30 Vac - Vdc 24 VacHeater consumption 30÷50 W depending on n. of

beamsOperating temp -25° ÷ +70° C -25° ÷ +70° C

Alarm output Free contact relay NC/NO Free contact relay NC/NO

Tamper swithches coloumn opening coloumn opening

Fog disqualification output Yes with dedicated OC Yes with dedicated OC NOOutput for beam masking Yes with dedicated OC Yes with dedicated OC

RS 485 connection YES NO NO NOProtection degree IP54 IP54

Dimensions LxPxH Ø80mm x 1200 ÷ 4000 mm Ø80mm x 1200 ÷ 4000 mm

29

SPECIFICATIONS

SANDOR PLUS SMA SANDOR PLUS

SANDOR DUAL-QUAD-ESA SMA SMA

SANDOR DUAL-QUAD-ESA

MANA IR SMA MANA IR

400 m 400 m 300 m 650 m

100 m 100 m 80 m 250 m

SMA STD SMA STD SMA STD

wired or optical wired optical 4 channels optical wired or optical wired

YES

Pulsed 950nM beams2-3-4TX + 2-3-4RX 2-3-4TX + 2-3-4RX

parallel or crossed parallel parallel or crossed crossed parallel or crossed parallelNo limit with parallel configuration,

with crossed configuration 4 ÷ 8m depending of n. of beams and

height

no limit No limit with parallel configuration, with crossed configuration 4 ÷


4 ÷ 8m depending of n. of beams and height

No limit with parallel configuration, with crossed configuration 4 ÷


no limit

OR - AND RANDOM - AND 1° and 2° beam OR - AND RANDOM OR - AND RANDOM - AND 1° and 2° beam

1° or 1° and 2° beam NO NO 1° or 1° and 2° beam

YES YES NO NO YES YES10-30 Vdc 13,8 Vdc 10-30 Vdc 13,8 Vdc 230Vac 230Vac

135÷150 mA depending on n of beams

135÷150 mA depending on n of beams

10÷30 Vac - Vdc 24 Vac 10÷30 Vac - Vdc 24 Vac

30÷50 W depending on n. of beams

80÷120 W depending on n. of beams

-25° ÷ +70° C -25° ÷ +70° C -25° ÷ +70° C

Free contact relay NC/NO Free contact relay NC/NO Free contact relay NC/NO

coloumn opening coloumn opening Opening coloumn cap and front polycarbonate

Yes with dedicated OC Yes with dedicated OC NO Yes with dedicated OCYes with dedicated OC Yes with dedicated OC

YES NO NO NO YES NOIP65 IP65 IP54

60 mm x 60 mm 500 ÷ 4000 mm

60 mm x 60 mm 500 ÷ 4000 mm

250 mm x 200 mm, 1000 ÷ 4000 mm

30

SPECIFICATIONS

COMPARISON OF “NON SMA” BEAM SPECIFICATIONS

MANA DT SMA MANA DT

MANA MW

Max range indoor 650 m 650 m

Max rang outdoor 250 m 250 m

Operating frequences 24 GHz band K section MW 24 GHz band K

Alignement technology SMA Standard Standard

Synchronism Optical or wired wired

Dual lenses beams YES

Photodevices Pulsed 950nM beams

Configurations in a barrier 1 couple MW + 2 ÷ 4 couple IR

Beams Alignment Crossed or parallel parallel

Minimal distance from TX and RX No limit with parallel configuration, with crossed configuration 4 ÷ 8m depending of

n. of beams and height

Settable operation mode OR - AND RANDOM - AND 1° E 2°BEAM

Settable beams exclusion 1° or 1° and 2° beam

Anti crawling function on first lower beam YES

Column supply 230 Vac

Circuit consuption 335÷350 mA depending on n. of beams TX 200 mA RX 200 mA

Heater consumption 180÷220 W depending on n of beams 100 W per coloumn

Operating temp -25°÷ +70°C

Alarm output Free contact relay NC/NO - MW & IR Free contact relay NC/NO

Tamper swithches Opening coloumn cap and front polycarbonate

fog disqualification output Yes with dedicated OC

output for beam masking Yes with dedicated OC

RS 485 connection YES

Protection degree IP54 IP54

Dimensions LxPxH 250 mm x 200 mm 1000÷ 4000 mm 250 mm x 200 mm 1000 ÷ 4000 mm

31

SPECIFICATIONS

*THERMOSTATED HEATERS CONSUMPTION (COUPLE OF)SADRINKIT THER 410 Kit of thermostated heaters for 4 dual optics columns – 2 thermostat + 6 heaters 1680 mA

SADRINKIT THER 615 Kit of thermostated heaters for 6 dual optics columns – 2 thermostat + 10 heaters 2800 mA

SADRINKIT THER 820 Kit of thermostated heaters for 8 dual optics columns – 2 thermostat + 14 heaters 3920 mA

SADRIN/SADRIN BIANCA

ALES60 / 120

NAT SENSOR

30 m / 10 m 250 m / 480 adjustable 1÷ 12m15 m / 5 m 60 m / 120 adjustable 1÷ 12m

24 Ghz (Mw detector)

Standard SMA

wired optical 4 channels

YES YES PIR Fresnel Pulsed 950nM beams

2 ÷ 10 RX and 2 ÷ 10 TX 1TX - 1RX

parallel parallel

OR - AND RANDOM

13,8Vdc 10÷30Vdc 13,8Vdc

60÷150 mA depending on n. of beams 90 mA 40 mA

-10°÷ +65°CFree contact relay NC/NO Free contact relay NC/NO relay NC - antimasking OC

opening coloumn Cover opening cover opening and wall removalYes with dedicated OC

IP54 IP65 IP6525 mm x 22 mm , 500 ÷ 4000 mm 78 mm x 78 mm x 185 mm 135 mm x 33 mm x 40 mm

32

SPECIFICATIONS

BATTERY LIFE

NUMBER OF BEAMS

WSE WSI

2 6 years *** 2 years *

4 3,5 years *** 1 year *

6 3 years *** 1,5 years **

8 2 years *** 1 year **

3m is the max range of full White version.

* using 2 batteries 3,6V – 2,7 mAh ** using 4 batteries 3,6V – 2,7 mAh*** using 1 battery 3,6V – 19 mAh

(*) A larger battery box is supplied with the WSE version to house the higher capacity battery and wireless trannsmitter. In calculating the total column hieght please note that the box is placed on the top of the columns.

Dimensions of the Box LxWxH 40 mm x 40 mm x 220 mm (- 12 mm column attachement). Useful space for housing the radio version 35 mm x 35 mm x 105 mm

SADRIN WSI - WSEBLACK / WHITE

SANDOR SMA WS PARVIS SMA WS ALES WS

Indoor range 15 / 5 200 m 200 m 200 m

Outdoor range 15 / 3 50 m 50 m 50 m

Alignement technology SMA TECHNOLOGY SMA SMA SMA

Synchronization optical optical optical with 4 channels optical with 4 channels

Dual Optical beams Yes with 15mm lenes (in And)

Yes with 35mm lenes (And) Yes with 35mm lenes (And) Yes with 35mm lenes (And)

Photobeams Pulsed 950nM beams Pulsed 950nM beams Pulsed 950nM beams Pulsed 950nM beams

Configuration of double beams inside the

column

2 to 8 TX and 2 to 8 RX 2-3TX and 2-3RX 1TX 1RX

Beams configuration for END OF LINE

barriers

2-3-4-5-6TX e 2-3-4-5-6RX

2-3TX o 2-3RX

Beams disposition Parallel Parallel Parallel Parallel

Settable operation mode OR - AND RANDOM OR - AND RANDOM OR - AND RANDOM OR

Settable beams exclusion yes yes

Anti-crawling function (first beam low) yes yes

Column Supply Battery 3,6V 2,7Ah (WSI) 3,6V 19Ah (WSE)

Battery 3,6V 19Ah Battery 3,6V 19Ah Battery 3,6V 19Ah

Battery life from 1 to 3 years 3 years 3 years 3 years

Alarm output Free contact relay (NC NO) on RX

Free contact relay (NC NO) on RX



Tamper output Free contact relay (NC NO) on RX (also for TX tamper)

Free contact relay (NC NO) on RX (also for TX tamper)



Fog disqualification output Yes with dedicated OC Yes with dedicated OC Yes with dedicated OC

Protection degree IP54 IP65 IP65 IP65

Dimensions Ø xH 80mm x from 1200mm to 4000mm

Dimensions LxPxH 25 mm x 22 mm from 500 to 4000 mm

60 mm x 60 mm from 500 to 4000 mm

78 mm x 78 mm x 185 mm

33

SPECIFICATIONS

BATTERY LIFE

NUMBER OF BEAMS

WSE WSI

2 6 years *** 2 years *

4 3,5 years *** 1 year *

6 3 years *** 1,5 years **

8 2 years *** 1 year **

SANDOR SMA HY PARVIS SMA HY SANDOR SOLAR SMA PARVIS SOLAR SMA

400 m 400 m 200 m 200 m100 m 100 m 50 m 50 mSMA SMA SMA SMA

optical with 4 channels optical with 4 channels optical with 4 channels optical with 4 channels

Yes with 35mm lenes (And) Yes with 35mm lenes (And) Yes with 35mm lenes (And) Yes with 35mm lenes (And)

Pulsed 950nM beams Pulsed 950nM beams Pulsed 950nM beams Pulsed 950nM beams

2-3TX 2-3RX 2-3TX 2-3RX

2-3-4-5-6TX e 2-3-4-5-6RX 2-3TX 2-3RX 2-3-4-5-6TX 2-3-4-5-6RX 2-3TX 2-3RX

Parallel Parallel Parallel ParallelOR - AND RANDOM OR - AND RANDOM OR - AND RANDOM OR - AND RANDOM

yes yes yes yes

yes yes yes yes

rechargeable Battery 3,6V 3,2Ah rechargeable Battery 3,6V 3,2Ah rechargeable Battery 3,6V 3,2Ah rechargeable Batterie 3,6V 3,2Ah

3 months (without mains power ) 3 months (without mains power ) 3 months (without mains power ) 3 months (without mains power )

Free contact relay (NC NO) on RX Free contact relay (NC NO) on RX Free contact relay (NC NO) on RX Free contact relay (NC NO) on RX





Yes with dedicated OC Yes with dedicated OC Yes with dedicated OC Yes with dedicated OCIP65 IP65 IP65 IP65

80mm x from 1200mm to 4000mm 80mm x from 1200mm to 4000mm

60 mm x 60 mm from 500 to 4000 mm

60 mm x 60 mm from 500 to 4000 mm

Via Adda 66/68 - 20882 BELLUSCO (MB) - Italytel. +39.039.6883019 - fax +39.039.6200471

www.politecsrl.it - [email protected]

S.r.l.

Updated Dec 2015

brochure 2016 - politec srl · outdoor perimeter protection of your property. over the years we...

Documents