Brief introduction H9MO Multi-Service Transmission Platform H9MOMSTP Equip-ment Mana-gement Service access Multi-Service Transmission Platform H9MO-LMXE+ is a carrier-class, cost-effective, compact, STM-1/4/16 SDH and PCM in one machine system designed for application in metro and access networks to facilitate the efficient transport of traditional TDM, Voice and data traffic for service providers. Brief introduction 0X01/0X04A/0X16A FE06,FE07,GX01A,GX02, GX05,GX06,GX10 Interface card H9MO-LMXE.OS04AH9MO-LMXE.EP01H9MO-LMXE.FE01H9MO-LMXE+.CHM01 H9MO-LMXE.OS01H9MO-LMXE.EP01/TH9MO-LMXE.FE02H9MO-LMXE+.CHU01 H9MO-LMXE.OS01SH9MO-LMXE.EP03H9MO-LMXE.FE04H9MO-LMXE+.CHR01 H9MO-LMXE.OS02AH9MO-LMXE.EP03/TH9MO-LMXE.FE05H9MO-LMXE+.CHL01 H9MO-LMXE.GX05H9MO-LMXE.EP01A/TH9MO-LMXE.FE06H9MO-LMXE+.CH4W01 H9MO-LMXE.GX06H9MO-LMXE.EP03A/TH9MO-LMXE.FE07H9MO-LMXE+.SD01 H9MO-LMXE.GX10H9MO-LMXE.DSL01H9MO-LMXE.GX01AH9MO-LMXE+.SD02 H9MO-LMXE.DSL02H9MO-LMXE.GX02AH9MO-LMXE+.CHD01 H9MO-LMXE+.EM20 Brief introduction Ethernet aggregation card Cross Connection card TDM service STM-1/4 E1/V.35 E3/DS3 PCM and Eth service FXS/FXO, hotline, magnet 4/W voice, E&M Ethernet access/aggregation SDH network STM-1/4/16 Or router Brief introduction Rack and system structure Card introduction Cross connection &uplink card Optical tributary card E1 service card Ethernet service card Ethernet aggregation card Card introduction Voice service card CWDM card Power and NM card Card introduction PWR01: DC -48V Power Supply, can be 1+1. PWR02: AC 220V Supply, can be 1+1. PWR02B: AC 110V Supply, can be 1+1. Card introduction Provides management for the whole H9M0- LMXE+ system; Support Huahuan GUI EMS management; It can monitor and show the status of all cards and the remote equipment. Support concatenation Used in Slot X1 and X2 Provide 2 STM-1/4/16 interface VC4 and VC12 level cross connection 2 built-in E1 BER testers Clock complies with ITU-T G.813(with one pair of external clock input and output on the backplane) Support SNCP protection Can be used to connect to the core network nodes(uplink) Can form a ring network with other SDH equipment Card introduction OS01 used in any service slot (slot 1-14) OS04A only used in slot 7&8 Provide 2 STM-1/4 interface Support SNCP protection Card introduction 4 100/10Base-Tx or 100/10Base-Fx Ethernet ports on the card; 4 separate VCG channel through VC-12 FE01,FE02 Ethernet over SDH(EoS) FE04,FE05 Ethernet over E1(EoE) Support LCAS VLAN supported Card introduction 2 100Bast-Tx interface FE06 Ethernet over SDH(EoS) FE07 Ethernet over E1(EoE) 8 internal VCG, aggregation ratio 8:1 Max aggregation ration: 56:1 802.1Q based VLAN Support GFP and LCAS Card introduction Gigabit Ethernet Aggregation Card 1 Electrical Gigabit Ethernet Port and 1 Optical Gigabit Ethernet Port (SFP Type) Support GFP/LCAS/VCAT/VLAN GX01A GX02A 8 internal VCG, aggregation ratio 8:1 GX10 63 internal VCG, aggregation ratio 63:1 GX01A Ethernet over SDH(EoS) GX02A GX10 Ethernet over E1(EoE) Gigabit Ethernet Aggregation Card 2 Electrical Gigabit Ethernet Port and 2 Optical Gigabit Ethernet Port (SFP Type) 16 internal VCG, aggregation ratio 16:1 Support GFP/LCAS/VCAT/ VLAN STP/RSTP/Trunk supported GX05 Ethernet over SDH(EoS) GX06 Ethernet over E1(EoE) Card introduction PCM Card CHL01 10 FXO channels, can be used in any service slot(slot 1-14) CHR01 10 FXS channels, can only be used in service and multi-function slot (slot 8-13), Ring card should be equipped Card introduction PCM Card CHM01: 4 FXS+4 4/W(with E&M)+4 RS232 channels, can only be inserted into slot 8-13 CHU01: 10 voice channels, can be set to FXS/FXO/ hotline/magnet, can only be inserted into slot 8-13 (unless all 10 channel is set to FXO mode) CH4W01 : 10 4/W Voice(no E&M) channels, can be used in any service slot(slot 1-14) Card introduction PCM Card EM20 20 Channel E&M interface DIO20 20 Channel IO signal interface Card introduction Ring Card RING 220V: 220V power input ring card RING 48V: 48V power input ring card Application EoPDH application Application Support: CAO DUY LINH Phone: