brick making machinery2
TRANSCRIPT
-
7/28/2019 Brick Making Machinery2
1/12
4-45 brick makingmachine
Brief introduction:
Block size(mm) Cysle number(piece) Cycle time(s) Capacity(8hours)
390190190 5 45 3200
390240190 4 45 2560
24011590 12 45 7680
24011553 24 45 15360
Remarks:
1Heterotypebrick can beproduced accordingto clients requirment
2Main power:3.7Kw
3Main machines overall dimension:150013001600mm
4Main machines weight:700Kg
5
Capacity: 20-25 m3
6Vibratingstyle:modelfvibration
7Thedatain theformis thetheory dara, therewill bealittledifferencein thereal
production becauseof several factors.
Theproduct can beproduced by sand, stone, fly ash, coal flag, gangue, tail slag,
ceramsite, perlite, etc. Likehollow cement blocks, solid bricks, without being
burned.
-
7/28/2019 Brick Making Machinery2
2/12
QMJ 4-35 brick makingmachine
Product description:
Our company has developed anew model for small and medium-sized investors, it
uses upand downvibration and compressiondevices, it produces theunburned block
with high density strength, It is easy tooperate, high productivity, low investment and
quick returns. it is theideal equipment for small-scaleproductioncustomer and the
ideal investment projects for early entrepreneurs. It is alsoan ideal choicefor
re-employment of laid-off workers. Seedetails below.
Technical parameters:
Block SpecificationsBlock numberMolding cycle shift Output8h
390190190 4 block 45s 2000-2560 block
390240190 3 block 45s 1800-1920 block
24011590 9 block 45s 5000-5760 block
24011553 21 block 45s 13000-13790 block
Brick shaped mold can beproduced in accordancewithusers needs.
Wood Pallet size:88045025mm
Power:4.4KW
Thelocal machinecan usesand, stone, fly ash, cinder, gangue, slag tail, ceramsite,
perliteand other industrial wasteto makeavariety of new wall material. Suchas the
hollow concreteblind hole brick, standard brick, etc, without being burned.
-
7/28/2019 Brick Making Machinery2
3/12
QTJ 4-26A block makingmachine
QTJ 4-26A block making machine is a semi-automatic model that has developed
on the basis of QTJ4-26 model, integrates the merits of past small and medium-sized
block molding machine. The aircraft uses four-pillar orientation, square steel rack, the
bottommold uses the directional vertical vibration mode. Themachineequipswithan
air compressor, making the process of advance and retreat of upper module,
material-discharging control use pneumatic, achieving the gas&electricity integrating
control, thereforegreatly enhancetheproductivity.
Molding
blocks
24011553 26bolcks/mold
390190190 4 bolcks/mold
390240190 3 bolcks/mold
Molding
cycle26s
productivity 3000-4000 block/shiftSolid Standard brick 20000-25000blocks
Vibration
frequency4200r.pm
Motor
power10.35kw
Overall
dimension260017002700mm
Pallet size 85055040mm
Total weight 3200kg
-
7/28/2019 Brick Making Machinery2
4/12
QTJ 4-25 Block Making Machine
Features
1 Reasonably design, compact structure, achieve oriented vibration and abolish
the energy consumption immediately, do not need feed pannels and layout matierials
withlabor, Greatly reduced thelabor intensity.
2 Give pressure from the top and bottom, strong concrete vibrating, Particularly
suitable for high-strength block molding production, after forming it can stack
Immediately(3-5 storeies);
3 One machine with many kinds of uses, if equipped With different abrasives it
can produceblocks of various specifications.
Notes:changing moldscan produceall kinds of blocks and bricks.
Equipped power Molding cycle Pallet sizemmOverall
dimensionmm
Implement
standard
21kw 25s 85045040 350019002400 GB/8533-1998
Block specifications Molding blocks Output / shift
400200200 3 3600blocks24011590 15 10500 blocks
24011553 26 24000 blocks
QTJ 4-18 block making machine
-
7/28/2019 Brick Making Machinery2
5/12
Features:
1.This machine adopts three bars to givepressure fromtop and bottomwhich ensures
molding from a single cut, blocks can be stacked Immediately after forming, do not
need brick panels, it is thelatest models in our country at present.
2electrical systemadopts ProgrammableController PLC to control theequipmentdata
input and output devices, this control system includes security logic control and fault
diagnosis system.
3.Imported computerelectrical appliances sealing parts, the hydraulic components
use proportional valve with high dynamic performance. In order to control the action
of thekey parts.
4.The body of the machine adopts high-precision, high-strength steel castings and
special welding technology and matierials, it possesses good rigidity, vibration
resistance, long life.
5.This machine adopts 4-pole oriented approach, ensures the pressure head and
grindingtool operateprecisely.
6.This machine adoptstable-module synchronousvibration mode to achievehydraulic
pressurized molding. Using round-trip guiding feeding devices, the molding cycle is
short, it has high productivity.the block compacting quality is of high densitystrenghthandhas precision size.
7.it adopts mechanical, electrical and fluid integration technology, So that each
operatingcycle is thesame.Thereby theproduct is of high stabilityand low reject rate.
8. One machine can be used in different ways, by changing the grinding tool it can
produce perforated bricks, Hollow bricks, Curb stone, road bricks and tree grass
planting bricks, Flower Grid brick and other cement products of different
specifications.
9.It can program the process according to the production need, Implementing such
action by manual, semi-automatic, full-automatic operation.
Moldingblocks Molding Output/shift Pallet size power Total Overall
-
7/28/2019 Brick Making Machinery2
6/12
cycle(s) weight dimension
24011553(mm)
28 Blocks/mold
15-20 45000-47000(block/8h) 85056020-30mm 17KW 7.5T 39502800275390*190*190mm
4 blocks/mold
5760-7680blocks/8h
QY T6-15 brick making machine
The whole machine adopts PLC system, computer interface operation, it can achieve
randomsignal analysis, fault diagnosis and parameter setting, which ensures the best
workingeffect.
Material storageandseparatory devices:adoptingsealed conveyor to transport, strictly
control the storable volume of the little hopper to achieve transportation for
immediateuse in order to prevent concretefrombeing fluidified earlier in the fluence
of afershock whichensures thestrenghth of theproducts.
Mandatory material feeding devices:when the material arranging truck moves to the
top of themold box, thestirring fork begins to work quickly, which ensures even slant
andidentical productsstrenghth.
Increase the effective work-table, the application of the new vibration technologies
makes this machinepossesses larger work-table, Greatly enhance the productivity.
Theoutput of bricks improve20 than domestic similar models .
Unique vibration forms: use computer control flow volume, pressure of the
hydraulic system, Completethe vertical synchronous vibration, frequency changing,
braking. Then convert pressurized excess oil into vibration strike force, thereby
reducing theenergy consumption.Reasonable distribution of vibration: The model case is locked on the vibration
-
7/28/2019 Brick Making Machinery2
7/12
platformtrough thefuel tank, thepressure head equipped withanother special vibrator,
achieving table-mold synchronous vibration to strengthen vibration effect, This kind
of vibration can make the concretes rapid liquefaction, exhaust, make the products
possesshigh-density, high strength.
Main technical performanceparameters
Molding blocksMolding
cycle
Theoretical
output
Motor
power
Total
weight
Overall
dimensionPallet size
390190190
6 blocks/mold
11500blocks/shift:
About
15s
About69120
blocks/shift(S
tandard brick)
34.5kw 9.8T 679022052780mm 85078040mm
24011590
18blocks/mold
34000 blocks/shift
2401155336blocks/mold
69120 blocks/shift
The local machine can use sand, stone, fly ash, cinder, gangue, slag tail, ceramsite,
perliteand other industrial wasteto make a variety of new wall material. Such as the
hollow concreteblind hole brick, standard brick, etc, without being burned.
QY T8-15, QY T10-15 block makingmachine
Over-strong steel structure design: widely adopts imported script which make the
body morestableandreliable.
High efficiency over-strongexcitation systemdesign:through the computer control the
flow pressure of the hydraulic system, realize vertical synchronous vibration,
frequency conversation, brake, and realize dual-end synthesis output, transport theexcitingforceto every part of the mold box equally and efficiently, enhances products
-
7/28/2019 Brick Making Machinery2
8/12
density and prolongs theservicelife of themold box.
Totally adopts PLC and man-machine interface control system, realizing random
signal analysis and fault diagnosis. Need various parameters settings therefore
reachingtheoptimized effect.
Equip special hydraulic encoding plate, it can realizebig automatical yield, it can savemuch labour and storage yard, reduce the investment of current funds. Semi-closed
compulsory material arranging system, which make the material arranging process
morequickly and even.
Main technical performanceparameters
QYT8-15
Molding numberMolding
cycle
Theoretical
output
Motor
power
Total
weight
Overall
dimension
Pallet
size
390190190
8block/mold15360block/shift
Around
15s
Abount 80640
block/shift
(standard
brick)
34.5KW 11.6T
7200
2100
2825mm
920
850
40mm
24011590
26block/mold
40320block/shift
24011553
42 block/mold 80640
block/shift
The pressure is about 12Mpa, the exciting force is about 50Kn, the vibration
frequency is 4500r/min.
QYT10-15
Molding numberMolding
cycle
Theretical
output
Motor
power
Total
weight
Overall
dimension
Pallet
size
390190190
10 blocks/mold
19200 blocks/shift
Around
15s
About92160
blocks/shift(standard
brick)
34.5KW 13.8T
7200
2290
2825mm
1080
850
40mm
24011590
26 blocks/mold
49920 blocks/shift24011553
48 blocks/mold
92160 blocks/shift
-
7/28/2019 Brick Making Machinery2
9/12
MZJ 60-8A non-burned brick machine
Productsdescription
This machineis as eight holes non-burned brick machine, it is apatent product which
devolpted based onthesimilar machines bothat homeand abord. This equipmenthas
throughted by experts identificationin 1990. it is enrolled tothestate'skey new
technology. Theproductsuseindustrial wastefly ashand slagcoalganguemetallurgical slag and various tail slag as main raw material. This unit
production linewithadvanced technology, reasonable design, stable performance,
reliable craftsmanship, high pressure, smooth operationandhigh production
efficiency. It is theideal equipment for buildingbusiness.
Main features:
1.Rotatingpartscompletely sealed, pressuresupply oil, circulatelubrication, theoil
through many filtering, Special settingtheoil tocompensatethetank, makerotational
part sufficiently lubrication, reducethewears.
2. Eccentric shaft rotation separatefromthecrankshaft gears, makethecrankshaft
gears completely sealed.
3. usemultipledustseal and high strengthof rubber.
4.both sideof thetop plug stemadoptsSpherical Watts, pressuresupply oil for
lubrication.
-
7/28/2019 Brick Making Machinery2
10/12
5. Mainly compression parts process finly withthehigh quality steel, to meet the
twicemorestrengthof themaximumworkingpressure.
6. wecan through increasethequality of triangleround toreachthepurposeof
increasingtherotation inertia, increasingthecrankshaft gear diameter tomakethe
rotatingtorqueincreasegreatly, somakethemachinewithhigh pressurepower
savinghigh yield etc advantages.
7. Theturning cross structureuses autocross gimbal, maketherotationmore
flexiblesmooth anddurableturningmechanismincreasesteel outer wheel, andthree
rigidity positioning, it maketurning mechanismworkingmorebalance, outer ring
canteasily suffer wears.
8. Dressing machineadaoptswormand wormwheels vicerotation, through lifting
screw toadjust thefeed height. DY 160-8 brick machineuseriver sand, coal ash slagtailings industrial wasteresidueas raw material to makestandard building bearing
brick, it alsocan makecement bricksrefractory bricks and unburned brick. Using this
equipmentandtechnology, can changewasteinto treasure, can saveenergy, reduce
consumption, protect land, it has theobvious economic benefitsandsocial benefits.
Production capacity 2000blocks/h Triangle belt 5-B4500mm
nominal pressure 600KNFeedingmechanical
motivationY 10012-43KW
Moldnumber 8piece Trianglebelt 3-A1650mm
revolutions of back to
turntable4.17r/min Envelopdimensions 350018002250(mm)
revolutions of
Crankshaft33.3r/min Wholeweight 5800kg
power Y 160L-6 15Kw
Newstyle unburned brick pressing machine
-
7/28/2019 Brick Making Machinery2
11/12
Features:
1.the equipment adopts mechanical vibration and gives pressure to both sides which
make the whole machine possesses these good performances:small power(host
11KW), large pressure, good exhaust,no aerated layer, even density, products are of
good quality, do notadheretomold and stuck themold.
2.Thedriving devices aresealed, easy tooperateand repair.
3.Applicable to many varieties, a wide range of raw materials can be used(two or
morekinds of raw materials) toproducetheunburned bricks.
4.Mainly produce standard bricks. If changing the mold, it can produce blind hole,
hollow bricksandother special-shaped bricks.
It is muchfamous by itslargepressurecompared with other machines.
Newstyle unburned brick molding machine
Type Y ZM180-2 Y ZM220-3 Y ZM320-4
Output 2000blocks/h 2880 blocks/h 3840 blocks/h
Machine power 11~15K W 11~15K W 15~22K W
Equipment pressure 180Mpa 220 Mpa 320 Mpa
Output/ time 2blocks/time 3 blocks/time 4 blocks/time
specifications24011553 24019090
24011590 24024090
Total weight 5800kg 6800kg 7800kg
-
7/28/2019 Brick Making Machinery2
12/12
Vacuum Brick Making Machine
The floating-type two-stage vacuum brick making machine is a new generationof brick making machine, which is developed on the basis of absorbing domestic and
foreign simliar technology. It is promoted by our company and state-level scientific
research department. It has reasonable design, compact structure, saving power,
convenient for installaton, and it can largely reduce the power consumption in the
processof deviceoperation.
Two-stage vacuumbrick making machine can use gangue, shale, fly ash, clay and
other raw materials to produceall kinds of solid bricks and various hole hollow brick.
Using this device technology, we can change waste into treasure and save energy
consumption, it will do muchtoeconomy benefit and social benefit.
Main Technical Parameters:
Type
MudTank
Diameter
(mm)
Pushing
Pressure
(Mpa)
Power
(KW)
Output/shift
ZJK500 500 2.0-3.8 110 100000-140000
ZJ K 450 450 2.0-3.6 90 90000-100000
ZJ K 400 400 2.0-3.0 75 70000-90000
ZJK 350 350 2.0 55 50000-70000ZJ K300 300 2.0 30 30000-50000
The difference between the previous machines and vacuum brick making
machine is mainly that the raw material is not same. The raw material for
thevacuumbrick making machinearemainly themud, clay or flyash,etc.