www.brenntag.com

for Color Cosmetics andPersonal Care Products

Brenntag‘s NEW Product Line

We provide you with high quality and sustainable raw materials for cosmetics application – today and tomorrow

BRENNTAG S NEW PRODUCT LINE The KenaPure product line stands for highest purity of colours, meeting legislative and statutory requirements. Brenntag offers a wide range of Dyes & Pigments for wide use in Cosmetic products. This is only an indicative range of colours and pigments and does not capture the full range of available products. If you do not find your suitable colour in the brochure, we encourage you to please contact your responsible Brenntag contact.

Shades depicted are for reference only. Customers are advised to check samples for shade matching.

We request customers to re-check with their approriate legislative authorities before using any of our products in their intended applications. Although, the information presented herein is believed to be reliable, Brenntag makes no representation or guarantee as to the accuracy, completeness or reliability of the information.

WATER SOLUBLE DYES

Field of Application Stability to

Product NameDark

ShadeLight Shade

Common Name. Color Index No.

JapaneseReference

EC/1223/2009& IS 4707

USA 21 CFR pH Light

Heat °C(Maximum)

KenaPure FD&C Yellow 5 FD & C Yellow 519140 Yellow#4 1 E-102 A 3 - 11 6 210

KenaPure FD&C Red 4 FD&C Red 414700

Red# 504 (*) 1 D 1 - 9 6 200

KenaPure FD&C Red 40 FD &C Red 4016035

Not Permitted 1 E-129 A 2 -10 5 210

KenaPure D&C Red 28 D&C Red 2845410 Red# 104-1 1 C 4 - 10 4 250

KenaPure D&C Red 33 D&C Red 3317200 Red #227 1 D & F 5 - 8 4 210

KenaPure FD&C Blue 1 FD&C Blue 142090 Blue # 1 1 E-133 A 3 - 11 5 180

OIL SOLUBLE DYES

Field of Application Stability to

Product NameDark

ShadeLight Shade

Common Name. Color Index No.

JapaneseReference

EC/1223/2009& IS 4707

USA 21 CFR pH Light

Heat °C(Maximum)

KenaPure D&C Red 17 D&C Red 17 26100 Red #225 3 D NA 7 100

KenaPure D&C Red 27 D&C Red 2745410 Red# 218 1 C NA 4 250

KenaPure D&C Violet 2 D&CViolet260725 Violet# 201 1 D NA 7 150

Ø Field of Application definition, as per EC/1223/2009 & 15:4707 for use of colours in cosmetics

1 - Colouring agents allowed in all cosmetic products.

2 -Colouring agents allowed in all cosmetic products except those intended tobe applied in the vicinity of the eyes, in particular eye make-up and eye-make-up remover.

3 - Colouring agents allowed exclusively in cosmetic products intended not to come into contact with the mucous membranes.

4 - Colouring agents allowed exclusively in cosmetic products intended to come into contact only briefly with the skin.

a - 3% maximum concentration in the finished product.

b - 6% maximum concentration in the finished product.

E - numbers, E-104, E-122 etc. denote !hat the respective colour has to meet European food colour directive for purity.

Field of Application definition, as per US FDA, 21 CFR for use of colours in cosmetics.

A - Permitted for colouring cosmelics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with current good manufacturing pratice.

B - Permitted for colouring cosmetics intended for use in the area of the eye, in amounts consistent with current good manufacturing practice.

C - Permitted for colouring cosmetics generally in amounts consistent with current good manufacturing practice.

D - Permitted for colouring externally applied cosmetics in amounts consistent with current good manufacturing practice.

E - Permitted for colouring externally applied cosmetics in amounts not exceeding 0.01 percent by weight of the finished cosmetic product.

F - Permitted for colouring cosmetic lip products in amounts not exceed 3% total colour by weight of the finished cosmetic product.

G - Permitted for colouring cosmetics intended for use in the area of the eye. face & nail. in amounts consistent with current good manufacturing practice.

Note:- Stability to Light fastness is measured on the scale of 1 to 8: Excellent= 8, Very Good= 7, Good= 6, Moderate= 5, Very Fair= 4, Fair= 3, Poor= 2, Very poor= 1.

(*) = These items are permitted to be used for those cosmetics which are not supposed to contact with mucous membrane.

≈IS 4707: Indian Standard for Dyes, Colours and Pigments permitted tobe used in Cosmetics and Soaps.

US FDA CERTIFIED ORGANIC PIGMENTS

Shade Uses in USA

Product NameAvg %

dyeMass Tone

Tint Tone Color Index No. Comments Li

pstic

k

Face

Mak

eup

Nail

Lacq

uer

Eye

Mak

eup

21 C

FR

EC/1

223/

2009

& IS

:470

7

Japa

nese

Refe

renc

e

KenaPure D&C Red 6 Ba Lake 45 15850:2 Barium

Lake M M M X C 1 Red #201

KenaPure D&C Red 27 Al Lake 20 45410:2 Aluminium

Lake M M M X C 1 X

KenaPure D&C Red 33 Al Lake Lake 18 17200:1 Aluminium

Lake M M M X D 1 Red #227

KenaPure FD&C Red 40 Al Lake 35 16035:1 Aluminium

Lake M M M M A 1E-129 X

KenaPure FD&C Yellow 5 Al Lake 40 19140:1 Aluminium

Lake M M M M A 1E-102 Yellow #4

KenaPure FD&C Yellow 6 Al Lake 40 15985:1 Aluminium

Lake M M M X C 1E-110 Yellow #5

KenaPure FD&C Blue 1 Al Lake 37 42090:2 Aluminium

Lake M M M M A 1E-133 Blue #1

INORGANIC PIGMENTS

Shade Uses in USA

Product NameAvg %

dyeMass Tone

Tint Tone Color Index No. Comments Li

pstic

k

Face

Mak

eup

Nail

Lacq

uer

Eye

Mak

eup

21 C

FR

EC/1

223/

2009

& IS

:470

7

Japa

nese

Refe

renc

e

KenaPure Black Iron Oxide 97 77499 lnorganic

Pigment M M M M A 1 Black oxideof lron

KenaPure Brown Iron Oxide

9877491, 77492, 77499

lnorganicPigment M M M M A 1

Red, Yellow, Black oxide

of lron

KenaPure Ultramarine

98 77007 lnorganicPigment X S NR M B 1 Ultramarine

KenaPure Violet

98 77742 lnorganicPigment M M M M A 1 Manganese

Violet

KenaPure Carbon Black Dispersion

32 77266 Water Dispersible X X X M G 1 -

Field of Application definition, as per US FDA, 21 CFR for use of colours in cosmetics.

A - Permitted for colouring cosmetics generally, including cosmetics intended for use in the area of the eye, in amounts consistent with current good manufacturing practice.

B - Permitted for colouring cosmetics intended for use in the area of the eye, in amounts consistent with current good manufacturing practice.

C - Permitted for colouring cosmetics generally in amounts consistent with current good manufacturing practice.

D - Permitted for colouring externally applied cosmetics in amounts consistent with current good manufacturing practice.

E - Permitted for colouring externally applied cosmetics in amounts not exceeding 0.01 percent by weight of the finished cosmetic product.

F - Permitted for colouring cosmetic lip products in amounts not exceed 3% total colour by weight of the finished cosmetic product.

G - Permitted for colouring cosmetics intended for use in the area of the eye, face & nail, in amounts consistent with current good manufacturing practice.

Field of Application definition, as per EC/1223/2009 & IS:4707 for use of colours in cosmetics

1 - Colouring agents allowed in all cosmetic products.

2 - Colouring agents allowed in all cosmetic products except those intended to be applied in the vicinity of the eyes, in particular eye make-up and eye-make-up remover.

3 - Colouring agents allowed exclusively in cosmetic products intended not to come into contact with the mucous membranes.

4 - Colouring agents allowed exclusively in cosmetic products intended to come into contact only briefly with the skin.

a - 3% maximum concentration in the finished product.

b - 6% maximum concentration in the finished product.

E - numbers, E-104, E-122 etc. denote that the respective colour has to meet European food colour directive for purity.

IS 4707: Indian Standard for Dyes, Colours and Pigments permitted to be used in Cosmetics and Soaps.

Legends:

C.I. No. = Colour Index Number X = Not Permitted S = Small Use Na = Sodium NA = Not Applicable

M = MajorUse - = Data not available NR = Not Recommended R = Recommended

(*) = These items are permitted to be used for those cosmetics which are not supposed to contact with mucous membrane.

** = Dye content is indicative and for reference only.

Shades depicted are for reference only. Clients are advised to check samples for shade matching. permitted tobe used in Cosmetics and Soaps.

OTS TREATMENT (N-Octadecyl-Triethoxysilane

Features Application

Strong hydrophobicity Powder foundation

Excellent dispersibility in various oil Loose powder

Moist/creamy texture Liquid/Cream foundation

Waterproof Air Cushion

Low Viscosity DispersionMascara Lipstick / Lip-gloss Eye shadowBlusher

FHS TREATMENT (Perfluroalkyl)Ethyl-Triethoxysilane

Features Application

Strong hydrophobicity and lipophobicity Powder foundation

Provide Long lasting effect /long wearing Liquid foundation

Smooth/spreadability Eye shadow

Waterproof and sebumproof Water resistant makeup

PGS TREATMENT 2-[Methoxy(Polyethyleneoxy)6-9 Proply]Trimethoxysilane

Features Application

Hydrophilicity Cosmetic emulsions

Uniform Dispersion in water Liquid eyeliners

Improved wetting in aqueous system Oil in water foundation

High pigment loading Mascara

Less sedimentation in water Water based concealers

SURFACE TREATED PIGMENTS

Trade Name Concentration Color Index No. Type

KenaPure Titanium Dioxide OTS

98% 77891 Inorganic pigment/ surface treated with N-OCTADECYL-TRIETHOXYSILANE

KenaPure Titanium Dioxide FHS

98% 77891Inorganic pigment/ surface treated with (PERFLUROALKYL)ETHYL- TRIETHOXYSILANE

KenaPure Titanium Dioxide PGS

98% 77891Inorganic pigment/ surface treated with 2-[METHOXY(POLYETHYLENEOXY)6-9 PROPYL]TRIMETHOXYSILANE

KenaPure Black Iron Oxide OTS

98% 77499 Inorganic pigment/ surface treated with N-OCTADECYL-TRIETHOXYSILANE

KenaPure Black Iron Oxide FHS

98% 77499Inorganic pigment/ surface treated with (PERFLUROALKYL)ETHYL- TRIETHOXYSILANE

KenaPure Red Iron Oxide OTS

98% 77491 Inorganic pigment/ surface treated with N-OCTADECYL-TRIETHOXYSILANE

KenaPure Red Iron Oxide FHS

98% 77491Inorganic pigment/ surface treated with (PERFLUROALKYL)ETHYL- TRIETHOXYSILANE

KenaPure Red Iron Oxide PGS

98% 77491Inorganic pigment/ surface treated with 2-[METHOXY(POLYETHYLENEOXY)6-9 PROPYL]TRIMETHOXYSILANE

KenaPure Yellow Iron Oxide OTS

98% 77492 Inorganic pigment/ surface treated with N-OCTADECYL-TRIETHOXYSILANE

KenaPure Yellow Iron Oxide FHS

98% 77492Inorganic pigment/ surface treated with (PERFLUROALKYL)ETHYL- TRIETHOXYSILANE

KenaPure Yellow Iron Oxide PGS

98% 77492Inorganic pigment/ surface treated with 2-[METHOXY(POLYETHYLENEOXY)6-9 PROPYL]TRIMETHOXYSILANE

Cosmetic Formulations

This publication or anything contained within this publication is intended for informational purposes only. Any information contained herein, including, but not limited to its accuracy, completeness, adequacy, freedom from legal defects (e.g. non-encumberance with third party intellectual property rights), or suitability for a particular purpose is provided without a warranty or representation of any kind. It is the sole responsibility of the user to evaluate and use the products for each individual purpose, and to examine their legal and regulatory compliance.

Hydra red Lipstick

PHASE INGREDIENTS/TRADE NAME INCI %W/W SUPPLIER

A

Octyldocecanol Octyldodecanol 63.510 Brenntag

Kenapure FD&C Yellow 5 Al Lake CI 19140 : 1 0.313Brenntag Colours

Kenapure FD&C Blue 1 Al Lake CI 42090 : 2 0.027Brenntag Colours

Kenapure D&C Red 6 Ba Lake CI 15850 : 2 9.153Brenntag Colours

DUB TMI Triisodecyl Trimellitate 6.000Stearinerie Dubois

DUB ZENOAT® Propanediol Dicaprylate 3.000Stearinerie Dubois

CosVivet Candelilla WaxEuphorbia Cerifera (Candelilla) Wax

5.000 Brenntag

CosVivet synthetic Beeswax VEGAN Synthetic Beeswax 2.000 Brenntag

CosVivet Carnauba Wax Copernicia Cerifera Cera 8.000 Brenntag

Cire H1 C10-18 Triglycerides 3.000 Stearinerie Dubois

Characteristics / Rich hydrating lipstick with intense color / Easy to apply, high covering and gloss

Procedure1. Add all ingredients one by one2. Mix all ingredients and heat to 80°C3. Pour into mould

Stabillity / Stable 1 month at 50°C, 3 months at 4°C, 40°C and 25°C

MAKE UP

This publication or anything contained within this publication is intended for informational purposes only. Any information contained herein, including, but not limited to its accuracy, completeness, adequacy, freedom from legal defects (e.g. non-encumberance with third party intellectual property rights), or suitability for a particular purpose is provided without a warranty or representation of any kind. It is the sole responsibility of the user to evaluate and use the products for each individual purpose, and to examine their legal and regulatory compliance.

MAKE UP

Bouncy Blush

PHASE INGREDIENTS/TRADE NAME INCI %W/W SUPPLIER

A

Mirasil® Cetyl DM Cetyl Dimethicone 5.0 Elkem SiliconesCosVivet Carnauba Wax Copernicia Cerifera Cera 5.0 Brenntag

Sunflower Wax Helianthus Annuus (Sunflower) Seed Wax 4.0 Brenntag

Talc Suprafino 3460H Talc 3.0 Brenntag Specialties Inc.

CosVivet synthetic Beeswax VEGAN Synthetic Beeswax 3.0 BrenntagCetyl alcohol Cetyl Alcohol 2.5 BrenntagMirasil® Caprylyl TSO Caprylyl Methicone 5.0 Elkem SiliconesMirasil® Balance Cetyl PEG/PPG-10/1 Dimethicone 2.5 Elkem SiliconesMirasil® DM 5 Dimethicone 8.0 Elkem Silicones

B

Mica 2281 Mica 15.0 Brenntag Specialties Inc.

Mica 2282 Synthetic Fluorphlogopite 4.0 Brenntag Specialties Inc.

Kenapure Red Iron Oxide FHSIron oxides (CI 77491) (and) (Perfluroalkyl) Ethyl-Triethoxysilane

0.1 Brenntag Colours

Kronos 1171 Titanium Dioxide 3.0 Kronos

C

Water Aqua (Water) 35.1 BrenntagEthylhexylglycerin Ethylhexylglycerin 1.0 BrenntagSodium Chloride Sodium Chloride 0.5 Brenntag

DUB DIOL Methylpropanediol 1.0 Stearinerie Dubois

Soft Sphere LL Silica (and) Lauroyl Lysine 1.5 Brenntag Specialties Inc.

Xanthan gum Xanthan Gum 0.3 Brenntag

MAS102 Magnesium Aluminium Silicate 0.5 Brenntag Specialties Inc.

Characteristics / Cream to powder texture / Provides a natural blush / You can use the same blush for both day and night looks

Procedure1. Prepare and heat phase C to 80°C for 1 hour2. Heat phase A to 80°C3. Add phase B to phase A under high stirring for 10 min.4. Add phase C to phase A+B under high stirring for 10 min.5. Cool down to 75°C and pour into mould

Stabillity / Stable 1 month at 50°C, 3 months at 4°C, 40°C and 25°C

This publication or anything contained within this publication is intended for informational purposes only. Any information contained herein, including, but not limited to its accuracy, completeness, adequacy, freedom from legal defects (e.g. non-encumberance with third party intellectual property rights), or suitability for a particular purpose is provided without a warranty or representation of any kind. It is the sole responsibility of the user to evaluate and use the products for each individual purpose, and to examine their legal and regulatory compliance.

MAKE UP

Longlasting Lip Cream

PHASE INGREDIENTS/TRADE NAME INCI %W/W SUPPLIER

A

Octyldocecanol Octyldodecanol 51.5 Brenntag

Kenapure Titanium Dioxide OTSIron Oxides (CI 77891) (and) N-Octadecyl-Triethoxysilane

7.0Brenntag Colours

Kenapure Red Iron Oxide OTSIron Oxides (CI 77491) (and) N-Octadecyl-Triethoxysilane

5.0Brenntag Colours

Kenapure FD&C Blue 1 Al Lake CI 77742 0.5Brenntag Colours

Mirasil® Cetyl DM Cetyl Dimethicone 6.0 Elkem Silicones

Mirasil® DM5 Dimethicone 15.0 Elkem Silicones

CosVivet MC wax Microcrystalline Wax 5.0 Brenntag

CosVivet Carnauba wax Copernicia Cerifera Cera 7.0 Brenntag

Mirasil® Stearyl DM Stearyl Dimethicone 3.0 Elkem Silicones

Characteristics / Shiny liquid lipstick with intense and trendy color / Longlasting color

Procedure1. Heat phase A to 80°C2. Cool down to 75°C3. Pour into packaging

Stabillity / Stable 1 month at 50°C, 3 months at 4°C, 40°C and 25°C

This publication or anything contained within this publication is intended for informational purposes only. Any information contained herein, including, but not limited to its accuracy, completeness, adequacy, freedom from legal defects (e.g. non-encumberance with third party intellectual property rights), or suitability for a particular purpose is provided without a warranty or representation of any kind. It is the sole responsibility of the user to evaluate and use the products for each individual purpose, and to examine their legal and regulatory compliance.

Easy Liner

PHASE INGREDIENTS/TRADE NAME INCI %W/W SUPPLIER

A

Water Aqua (Water) 77 Brenntag

Albagel 4444 Bentonite 2Brenntag Specialties Inc.

Glycerin Glycerin 3 Brenntag

Ethylhexylglycerin Ethylhexylglycerin 1 Brenntag

B Isopar H C11-12 Isoparaffin 10 Exxon

C

Himosap GAS 100Acrylamide (and) Sodium Acryloyldimethyltaurate (and) Acrylic acid copolymer

2 Derypol

Kenapure Red Iron Oxide PGSIron Oxides (CI 77491) (and) 2-(Methoxy(Polyethyleneoxy)6-9 Propyl) Trimethoxysilane

3Brenntag Colours

Kenapure Titanium Dioxide PGSIron oxides (CI 77891) (and) 2-(Methoxy(Polyethyleneoxy)6-9 Propyl) Trimethoxysilane

2 Brenntag Colours

Characteristics / Liquid eyeliner / Long lasting. No-transfer. Available in different colors on request

/ Easy to remove

Procedure1. Prepare and heat phase A to 80°C during 40 min.2. Cool down and add phase B3. Cool down and add phase C

Stabillity / pH= 7 / Viscosity: 7200 cP M93 @ 10rpm (Brookfield serie DV-II+Pro) / Stable 1 month at 50°C, 3 months at 4°C, 40°C and 25°C

MAKE UP

This publication or anything contained within this publication is intended for informational purposes only. Any information contained herein, including, but not limited to its accuracy, completeness, adequacy, freedom from legal defects (e.g. non-encumberance with third party intellectual property rights), or suitability for a particular purpose is provided without a warranty or representation of any kind. It is the sole responsibility of the user to evaluate and use the products for each individual purpose, and to examine their legal and regulatory compliance.

BODY CARE

A Pleasant Moment Shower Jelly

PHASE INGREDIENTS/TRADE NAME INCI %W/W SUPPLIER

A

Water Aqua (Water) 68.08 Brenntag

Carrageenan Chondrus Crispus 3.00 Brenntag

Glycerin Glycerin 5.00 Brenntag

B

Blend L20

Hippophae Rhamnoides (Sea Buckthorn) Seed Oil (and) Hippophae Rhamnoides (Sea Buckthorn) Fruit Oil

2.00 Puredia

Durosoft® PG10CY Polyglyceryl-10 Caprylate 1.00Stephenson Personal Care

Maprosyl® 30 B Sodium Lauroyl Sarcosinate 20.00 Stepan

C

Sodium benzoate Sodium benzoate 0.30 Brenntag

Potassium sorbate Potassium sorbate 0.30 Brenntag

Lagune Bleu Parfum (Fragrance) 0.30 Givaudan

Kenapure D&C Red 33 CI 17200 0.02 Brenntag Colours

Characteristics / A destressing globe of sulfate free foaming jelly infused with relaxing perfume

Procedure1. Prepare phase A and heat to 80°C2. Add phase B 3. Add phase C4. Pour into moulds Stabillity / pH= 4,5 / Stable 1 month at 50°C, 3 months at 4°C, 40°C and 25°C

This publication or anything contained within this publication is intended for informational purposes only. Any information contained herein, including, but not limited to its accuracy, completeness, adequacy, freedom from legal defects (e.g. non-encumberance with third party intellectual property rights), or suitability for a particular purpose is provided without a warranty or representation of any kind. It is the sole responsibility of the user to evaluate and use the products for each individual purpose, and to examine their legal and regulatory compliance.

Perfect Sleek Micellar Shampoo

PHASE INGREDIENTS/TRADE NAME INCI %W/W SUPPLIER

A

Water Aqua (Water) 62.08 Brenntag

Bioterge® 40 HA-SB Sodium Olefin Sulfonate 13.00 Stepan

Amphosol® CDB Special Cetyl Betaine 7.00 Stepan

B

Durosoft® PG10-CY Polyglyceryl-10 Caprylate 2.00Stephenson Personal Care

EsterlacTM SLL Sodium Lauroyl Lactylate 2.00 Corbion

Water Aqua (Water) 10.00 Brenntag

EsterlacTM Care + Sodium Isostearoyl Lactylate 1.50 Corbion

C

Dissolvine® GL-47 S Tetrasodium Glutamate Diacetate 0.30 Nouryon

Phenoxyethanol Phenoxyethanol 0.70 Brenntag

Oxiflow® S6800

Sorbeth-450 Tristearate (and) Water (and) PEG-9 Cocoate (and) PEG-32 Distearate (and) PEG-175 Distearate

1.00 Oxiteno

Kenapure FD&C Red 4 CI 14700 0.02 Brenntag Colours

Agrumes & thé vert Parfum (Fragrance) 0.40 Givaudan

Characteristics / Shampoo that develops rich foam with nice cushion effect / Easy to comb during wet and dry stage / Provides nice gloss, softening, hair volume

Procedure1. Prepare and heat phase A and phase B to 45°C2. Add phase B to phase A while mixing3. Cool down and add phase C

Stabillity / pH= 6,5 / Viscosity: 7060 cP M02 @ 10rpm (Brookfield serie DV-II+Pro) / Stable 1 month at 50°C, 3 months at 4°C, 40°C and 25°C

HAIR CARE

www.brenntag.com

Brenntag Holding GmbHMesseallee 11 45131 EssenGermany lifescience@brenntag.de