brüel systems a/s · recently brüel has developed a spin dryer which is designed to meet the...

2
Brüel Systems A/S W. brüels Vej 11 DK-9800 Hjørring Denmark Tel.: +45 98 92 00 11 Fax:+45 98 92 09 06 E-mail: [email protected] Website: www.bruelsystems.com Brüel Systems A/S Brüel Systems A/S is one of Europe’s largest manufacturers of fully automated crate washing and handling equipment for the food and box pool industries world wide. The company is based in Denmark. More information: www.bruelsystems.com Spin dryer - washing & handling solutions

Upload: others

Post on 10-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Brüel Systems A/S · Recently Brüel has developed a spin dryer which is designed to meet the highest hygiene standards. Within few seconds optimum dryness is achieved using a minimum

Brüel Systems A/S W. brüels Vej 11 DK-9800 Hjørring Denmark Tel.: +45 98 92 00 11 Fax:+45 98 92 09 06 E-mail: [email protected] Website: www.bruelsystems.com

Brüel Systems A/S

Brüel Systems A/S is one of Europe’s largest manufacturers of fully automated crate washing and handling equipment for the food and box pool industries world wide. The company is based in Denmark. More information: www.bruelsystems.com

Spin

dry

er

- washing & handling solutions

Page 2: Brüel Systems A/S · Recently Brüel has developed a spin dryer which is designed to meet the highest hygiene standards. Within few seconds optimum dryness is achieved using a minimum

Washing | Handling | Dist

Brüel Systems thinks of the future! The hygiene of boxes is a major consid-eration within the food industry, which is why brüel is committed to continuously improve our drying results. Recently Brüel has developed a spin dryer which is designed to meet the highest hygiene standards. Within few seconds optimum dryness is achieved using a minimum of energy. The provision of high efficiency combined with energy savings makes the spin dryer a highly cost efficient and environmentally friendly solution.

Drying step by step... ■ In-feed: The foldable boxes are positioned on the in-feed conveyor in stacks of up to 460 mm in height. The stack is fed to the drying cabinet by means of the in-feed conveyor. The carrier pins of the conveyor secure the stack transport. Optional: Automatic handling equip- ment is available — the in-feed system pictured is an in-feed connection mod- ule with automatic stack pusher.

■ Drying: Once the stack is posi- tioned on the rotor plate, the cage is lowered to secure the stack during the drying process. When the cage is locked with the rotor plate, the drying process can start.

■ Out-feed: The dry stack is eventu- ally pushed onto the out-feed con- veyor as the next stack enters the

Double spin dryer

Stack in position on the rotor plate

Connection module for automatic in-feed

Display for control/adju

tribution | Storage | Sorting

- perfectly dry boxes in record time

Technical data ■ Capacity Stacks of 12 foldable boxes - up to 4800 foldable boxes/h

■ Rotations Variable through frequency inverter - max. 900 rpm at 60 Hz

■ Drying result 1-3 g residual moisture per foldable box

■ Energy consumption Total installed power - approx. 28kW Average power - approx. 10 kW ~ 2 W/foldable box

Out-feed for manual handling

Cage is lowered and spinning cycle is started

ustment of all functions