branding techniques
DESCRIPTION
Sample Book of Branding Techniques available for The Wren Design Paper Range.TRANSCRIPT
1
Paper that would otherwise land up at a recycling plant is rescued and repurposed.
2
3 4
Sprayed with an environmentally friendly nano liquid glass coating to make the paper water resistant.
Once the paper is fused it can be treated like any other fabric. We draw the pattern, cut it and stitch the bag or sleeve with great care.
Artwork size Limited to twenty pricks
Colour Single Large variety of colours available
Quantity 1-100
Price V V V Price calculated per needle prick
Process Post manufacture 2 - 20 working days
Notes Placement limited to front pocket only Plain stitch embroidery only Geometric designs only Distance between pricks should not be more than 5cm
Artwork size 8cm x 4.5cm max (regular stamp pad) 9cm max (circular black stamp pad)
Colour One colour Specific colours can be ordered*
Quantity No minimums
Price V Stamp manufacture and unit stamping cost
Process During manufacture 3 – 7 working days
Notes Will have a distressed look Fine print details are not always clear Magnets prevent stamping close to the edge of the flap Larger stamp pads and wider range of colours can be ordered but are subject to availability and additional lead times *Colours may not be an exact match
Artwork size 100cm x 150cm (maximum block size)
Colour No colour
Quantity 10+
Price V V Block price (calculated per square millimeter), set-up and unit debossing cost
Process Pre or post manufacture 3 – 10 working days
Notes No fine designs; bold designs add depth Maximum depth of block placement is 120cm from the edge Magnets prevent debossing close to the edge of the flap Possible bruising of paper on reverse side if debossed after manufacture
Artwork size No limitations
Colour Single to multiple pantone colours available
Quantity 25+
Price V V V Set-up and unit printing cost
Process Pre manufacture 3 – 15 working days
Notes Will have a distressed look High quality Fine detail
Artwork size 100cm x 150cm (maximum block size)
Colour One colour only Selection of metallic colours are available*
Quantity 10+
Price V V Block price (calculated per square millimeter), set-up and unit foiling cost
Process Pre or post manufacture 3 – 10 working days
Notes Bold designs add depth Maximum depth of placement is 120cm from the edge Magnets prevent foiling close to the edge of the flap Possible bruising of paper on reverse side if foiled after manufacture * If specific colours are required they can be ordered but are subject to availability and additional charges
Artwork size No limitations
Colour Full colour
Quantity 10+
Price V V V V V Unit printing cost
Process Pre manufacture 3 – 5 working days
Notes Will have a distressed look High quality Dark or intense prints are not advisable
Artwork size 9cm x 3.5cm (maximum size for tab) 5.5cm x 3cm (maximum design area for flat tab) 2cm x 3cm (maximum design area for folded-over tab)
Colour Leather available in various colours Rivets: antique brass / antique nickel
Quantity 10+
Price V V Set-up and unit lasering cost Cost of leather calculated separately
Process Post manufacture 5 – 10 working days
Notes Placement either flat on front pocket or flap (2 rivets) or fold-around on flap (1 rivet)
The Wren Design