b&r enclosures hazardous areas · the hazardous area market. ... 10 hazardous areas lighting...
TRANSCRIPT
B&R Enclosures
HAZARDOUS AREASCATALOGUE
Table of Contents
INTRODUCTIONB&R History ---------------------------------------------------------------------------------------2
Capabilities ----------------------------------------------------------------------------------------4
BReakthrough Solutions ----------------------------------------------------------------------6
BRight Ideas ---------------------------------------------------------------------------------------8
PRODUCT SELECTION GUIDELighting ------------------------------------------------------------------------------------------- 10
Enclosures --------------------------------------------------------------------------------------- 12
Plugs & Sockets -------------------------------------------------------------------------------- 12
Weatherproof Lighting & Enclosures --------------------------------------------------- 12
TECHNICAL INFORMATION --------------------------------------------------------------- 13
EX D ENCLOSURESAluminium Ex d Enclosures --------------------------------------------------------------- 18
ENCLOSURESTerminal Boxes ---------------------------------------------------------------------------22 – 28
Control Boxes -----------------------------------------------------------------------------30 – 36
Non-Metallic Enclosures --------------------------------------------------------------38 – 43
LIGHTINGLED Lighting ------------------------------------------------------------------------------46 – 56
Well Glass Lighting ---------------------------------------------------------------------58 – 60
Floodlighting ------------------------------------------------------------------------------62 – 68
Caution Lighting -------------------------------------------------------------------------70 – 73
Fluorescent Lighting -------------------------------------------------------------------74 – 83
Fluorescent & LED Lighting ----------------------------------------------------------84 – 89
PLUG & SOCKET OUTLETSPlug & Socket Outlets ------------------------------------------------------------------92 – 93
WEATHERPROOFFloodlighting ------------------------------------------------------------------------------------ 96
Non-Metallic Control Boxes-------------------------------------------------------- 98 – 100
DisclaimerThis catalogue has been prepared specifically for customers of the publisher and as a general reference only. B&R Enclosures Pty Ltd engages in a policy of continuous development and improvement of its products and reserves the right to alter, add and/or delete specifications of any products or equipment without notice and without incurring liability. The publisher and any party associated with the production of this catalogue do not accept any responsibility or liability whatsoever (to the extent permitted by law) for any inaccuracy, error, misinformation or misleading statements, whether negligently caused or otherwise, contained in this publication. This publication is protected by copyright and may not be reproduced or copied (using any method of reproduction or copying), sold, transmitted, circulated or otherwise forwarded to third parties, in whole or part, without prior written consent of the author. All registered trademarks and product names appearing herein are the property of the respective owners.
edBorn and
Australian
A little bit about B&R Enclosures
Since 1955, B&R has built a reputation for excellence inthe design and manufacture of enclosures. Everything wehave learned in that time, we’ve poured into our productsand relationships.
As a 100% Australian, family-owned business, B&R champions the virtues of quality, service and value. Combined with our unrivalled industry and application knowledge, we are in a unique position to meet the needs of our clients.
The company encompasses four divisions: Industrial, Data ICT, Hazardous Areas and Residential Commercial. Each division has focuses on the unique needs of different market segments.Together, these divisions share the strengths, resources and experience of the founding company to provide attentive customer service, innovative design and superior quality products at a competitive price. Quality is assured with B&R’s certification to ISO 9001:2008.
B&R is also accredited by the Australian Stainless Steel Association as a superior producer of stainless steel products, working to industry best practice.
Our occupational health and safety management system is certified to AS/NZS 4801:2001.
At B&R, we are justifiably proud of our products, and we strive to ensure that you have what you need, when you need them. We have a network of offices and distributors throughout Australia and internationally. Wherever you are, you will be able to buy B&R products nearby.
B&R Enclosures was founded by Dick Bridges in 1955, specialising in sheet metal fabrication, including electrical enclosures for domestic metering applications. With little capital but great enthusiasm for operating his own business and a determination to succeed, Dick commenced operations in his backyard in Adelaide, South Australia.
It was this family determination that has sustained B&R’s growth into manufacturing plants in Brisbane, Adelaide and Sydney, 10 locations nationally and an international network of distributors, allowing them to increase the range, availability, quality and service to their customers.
Under the direction of the founder’s son, Ken and daughter, Chris, B&R Enclosures has grown to be the largest manufacturer of domestic, commercial and industrial enclosures in Australia.
Length and
With more than 300 employees in different locations, we are ready and able to rise to the biggest challenge.
At B&R, we understand that technology and our people play an important role in making sure our products are of the highest quality. From material through to design and manufacturing, B&R do not compromise on quality. Our final product is not only functional but durable.
Our capabilities include:
• 3D Solidworks modelling
• Automated laser cutter, robotic punching and bending machines
• Robotic foamed in place gasket application machinery
• Automated powdercoating lines with multi-stage pre-treatment process
• Value add services
• Warehousing and distribution
• In-house testing including IP protection rating, salt spray, structural, climate and electrical conformity
eadth
At B&R, we not only manufacture and supply a range of enclosure solutions, but we can customise the design to be 100% fit-for-purpose and ready for installation.
B&R Enclosures offer a wide range of services to customise standard product, ensuring that an enclosure is delivered ready for installation. We understand that time is a major consideration on any project and work with our customers to provide products on time and on budget.
We have established two value add divisions located within our manufacturing facilities at Heathwood, Brisbane and Riverwood, Sydney.
brenclosures.com.au
Our services include:
• Door cutouts• Cable entries• Terminals and controls fitted• Viewing windows• Customised wiring• Vent kits / sunshields fitted or punched• Assemble to order / fitting of accessories
What this means for our customers:
• Customised product to suit the project• Shorter lead times• Available for small or large quantities• One point of contact• Standard product straight off the floor
solutionseakthrough
Our people are the best in the business. Experienced professionals with a passion for problem solving and a fl air for innovation.
brenclosures.com.au
With over 100 years combined industry experience, B&R Enclosures have built a reputation as leaders in the hazardous area market.
Specialising in the supply of electrical equipment for hazardous areas, B&R Ex Systems utilises the manufacturing and distribution network ofB&R Enclosures and a highly experienced team to deliver products of the highest standard.
The company is dedicated to providing superiorquality products, designed to meet the stringent requirements of the internationally recognised IEC Ex Certification Scheme.
B&R Ex Systems accreditation to ISO 9001 for the design, manufacture and distribution of electrical equipment for hazardous areas.
B&R Ex Systems offer a large range of enclosures, lighting, controls and cable glands, as well as IEC Ex certified value add services including custom control fit outs. The dedicated B&R Ex Systems team has over 100 years combined industry experience in the hazardous area market.
The company's philosophy of quality is applied from design through to delivery, so you can be certain your hazardous area projects are safe and reliable.
ideasight
10 Hazardous Areas
LIGHTING
Product Description Protection Method Zones Page No.
LED Exit Light Ex d 1 & 2 46 – 47
LED Lowbay Light Ex d 1 & 2, 21 & 22 48 – 49
LED Linear Light Ex d 1 & 2, 21 & 22 50 – 51
LED Lowbay Light Ex d, Ex t 1 & 2, 21 & 22 52 – 53
LED Lowbay Light Ex d e 1 & 2, 21 & 22 54 – 55
LED Well Glass Ex d, Ex t 1 & 2, 21 & 22 56 – 57
Well Glass Light 400W Ex d 1 & 2 58 – 59
Well Glass Light Ex de 1 & 2 60 – 61
150W – 400W Floodlight Ex de 1 & 2 62 – 63
Well Glass Floodlight Ex nR, Ex t 1 & 2, 21 & 22 64 – 65
150W – 400W Floodlight Ex nR, Ex t 1 & 2, 21 & 22 66
Tank Inspection Vessel Light Ex d 1 & 2 67
300W Halogen Floodlights Ex n R 2 68 – 69
Audio & Visual Caution Light Ex d 1 & 2 70
Visual Caution Light Ex d, Ex t 1 & 2, 21 & 22 71
Local Visual Caution Light Ex de, Ex tb 1 & 2, 21 & 22 72
PRODUCT SELECTION GUIDE
brenclosures.com.au Hazardous Areas 11
LIGHTING
Product Description Protection Method Zones Page No.
Local Visual Caution Light Ex de, Ex tb 1 & 2, 21 & 22 73
Annular Compact Fluorescent Ex d 1 & 2 74 – 75
Aluminium Fluorescent Ex d 1 & 2 76 – 77
Stainless Steel Fluorescent Ex d emb, Ex d 1 & 2 78 – 79
Non-Metallic FluorescentEmergency & Non-Emergency Ex deq, Ex tD 1 & 2, 21 & 22 80 – 81
Non-Metallic FluorescentEmergency & Non-Emergency
Ex deqmb, Ex tD 1 & 2, 21 & 22 82 – 83
Aluminium Fluorescent & LED Ex d, Ex t 1 & 2, 21 & 22 84 – 85
Non-Metallic Fluorescent & LEDEmergency & Non-Emergency
Ex nA, Ex d nA, Ex d mb,Ex t, Ex mb
2, 21 & 22 86 – 87
Non-Metallic Fluorescent & LED Ex nA, Ex t 2, 21 & 22 88 – 89
Weatherproof Lighting WF1, IP66 – 96 – 97
PRODUCT SELECTION GUIDELIGHTING
12 Hazardous Areas
ENCLOSURES AND PLUG & SOCKET OUTLETS
Product Description Protection Method Zones Page No.
Ex d Enclosures Ex db, Ex tb, Ex d, Ex t 1 & 2, 21 & 22 18 – 19
Sloping Roof Terminal Box Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t 1 & 2, 21 & 22 22 – 23
Flat Roof Terminal Box Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t 1 & 2, 21 & 22 24 – 25
Flat Roof Terminal Box Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t 1 & 2, 21 & 22 26 – 27
Stainless Steel Terminal Box Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t 1 & 2, 21 & 22 28 –29
Sloping Roof Custom BuiltControl Box
Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t
1 & 2, 21 & 22 30 – 31
Flat Roof Custom BuiltControl Box
Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t 1 & 2, 21 & 22 32 – 33
Flat Roof Custom BuiltControl Box
Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t 1 & 2, 21 & 22 34 – 35
Stainless Steel Control Station Ex e, Ex nA, Ex de, Ex tD, DIP, Ex t 1 & 2, 21 & 22 36 – 37
Non-Metallic Control Station Ex ed, Ex tD 1 & 2, 21 & 22 38 – 39
Non-Metallic Terminal Box Ex e, Ex tD 1 & 2, 21 & 22 40 – 41
Non-Metallic Terminal Box Ex e, Ex tD 1 & 2, 21 & 22 42 – 43
Plug & Socket Outlets Ex de, Ex tD 1 & 2, 21 & 22 92 – 93
Non-Metallic Control Box – – 98 – 99
Weatherproof Control Box – – 100
PRODUCT SELECTION GUIDEENCLOSURES, PLUG & SOCKET OUTLETS
brenclosures.com.au Hazardous Areas 13
What is a hazardous area?A hazardous area is an area where flammable liquids, vapours, gases or combustible dusts are likely to occur in sufficient quantities to cause fire or explosion. Industries such as metalliferous mining, oil and gas infrastructure, automotive refuelling stations, chemical processing plants, printing industries and cement works often have hazardous applications.
There are three basic conditions that must be satisfied to create a fireor explosion.1. Flammable or combustible material – such as flammable Liquid, vapour or
combustible dust must be present in sufficient quantity and concentration.2. Oxygen3. Ignition source
Hazardous area electrical equipment works by suppressing or separating one or more of these three components to avoid a fire or explosion.
Ignition SourcesThe following ignition sources have the potential to cause an explosion in the right circumstances:
• Electric arcs and spark• Flames• Hot surfaces• Electrostatic sparks• Thermite sparks• Mechanical friction
IEC Standards & CertificationsIEC Ex is an internationally recognised scheme for the certification of hazardous area electrical equipment. The IEC Ex System is designed to facilitate international trade in equipment and services for use in hazardous areas, while maintaining the required level of safety.1
Required InformationThere are 4 important pieces of information required when selecting equipment for hazardous areas.
• Zone Classification• Gas Group• Temperature or T Rating• IP Rating
Zone ClassificationsEquipment that is used in hazardous areas is classified into zones, depending on the potential of an explosion under normal operating conditions. The table below is a guide to zone classification of hazardous areas. B&R Ex Systems does not classify areas for customers, it is the responisbility of the installer or end user to know which zone their area falls within. It is recommended a qualified person is engaged to complete a risk analysis and classify the area in accordance with standard IEC 60079-14.
Gas & vapours Dust Description
Zone 0Ga
Zone 20Da An area in which an explosive atmosphere is continuously present or for long periods or frequently
Zone 1Gb
Zone 21Db An area in which an explosive atmosphere is likely to occur occasionally in normal operation.
Zone 2Gc
Zone 22Dc An area in which an explosive atmosphere is not likely to occur in normal operation.
The hazardous areas are classifi ed in the table above according to IEC 60079-10-1 and IEC 61241-10-2.
Flammable or
combustible material
Oxygen Ignition source
TECHNICAL INFORMATION
• Mechanical sparks produced by grinding• Smouldering deposits• Compression ignition• Electromagnetic radiation• Chemical reactions• Ultrasonics
14 Hazardous Areas
Gas GroupsElectrical apparatus for use in areas with flammable gases and vapours are divided into groups:Group I – electrical equipment used in underground coal miningGroup II – electrical equipment used in petrochemical industries
Group II is subdivided into 3 groups based on their explosive properties (see table below).
Groups Representative Gas
Group I Methane
Group IIA Propane
Group IIB Ethylene
Group IIC Hydrogen, Acetylene, Carbon Disulphide
Temperature or 'T Rating'Temperature for IgnitionHot surfaces are a potential ignition source in hazardous applications. Hazardous materials will have different minimum temperatures at which ignition becomes a danger. Electrical equipment for hazardous areas is tested and allocated a ‘T Rating’ based on the maximum temperature of the equipment. The ‘T Rating’ must always have a lower maximum temperature than the ignition temperature of the gas group present.
Table 1: provides a summary of the maximum temperatures for the different ratings.
T Rating Maximum Temperature
T1 450ºC
T2 300ºC
T3 200ºC
T4 135ºC
T5 100ºC
T6 85ºC
Table 2: provides some examples of the ignition temperatures and ‘T Ratings’ for gases.
Example Gas Ignition Temperature T Rating
Methane 580ºC T1
Hydrogen 500ºC T1
Kerosene 295ºC T3
Petroleum 400ºC T2
Carbon Disulphide 95ºC T6
Diethyl Ether 160ºC T4
Ethyl Nitrite 95ºC T6
Hydrogen Sulphide 270ºC T3
TECHNICAL INFORMATION
brenclosures.com.au Hazardous Areas 15
TECHNICAL INFORMATION
DustCombustible DustDust fibres or flyings, which are combustible or ignitable when mixed with air are known as combustible dusts. Dust explosions may be initiated by ignition of a cloud of dust. It is not unusual for an explosion, which starts from the ignition of a dust layer, to cause the dislodging of dust accumulated on various surfaces, which then leads to a dust cloud explosion.
Table 3: Characteristics of some common combustible dusts
Material Minimum ignition energy (mJ)
Ignition temperature
Cloud, ºC Layer, ºC
Aluminium 15 550 740
Coal, Pittsburg (experimental mine coal) 60 610 170
Rice 50 440 220
Sugar 30 370 400
Wheatfl our 30 380 360
NOTE: The data given in this table is derived from AS 2430.2:1986 (superseded by AS/NZS 61241.3 which is superseded by AS/NZS 61241.10)
Protection MethodsTypes of explosion protection for electrical equipment.
Type of Protection Principle Standard Zone
Ex d Flameproof Enclosure Containment – explosion within an enclosure will not be propogated outside the enclosure.
IEC 60079-1 Zone 1 & 2
Ex p Pressurised EnclosuresEnclosure in a protective gas is maintained at a pressure greater than that of the external atmosphere. IEC 60079-2 Zone 1 & 2
Ex q Powder Filling Mounting of potentially incendive components in an enclosure fi lled with quartz or solid glass particles. IEC 60079-5 Zone 1 & 2
Ex o Oil Immersion Equipment or parts are immersed in protective liquid such as oil. The protective liquid acts as an insulating medium. IEC 60079-6 Zone 1 & 2
Ex e Increased Safety Non sparking components are designed to substantially reduce the likelihood of the occurrence of fault conditions which could cause ignition. IEC 60079-7 Zone 1 & 2
Ex i Intrinsic Safety The potential spark energy of a circuit is reduced to below the amount required for ignition.
IEC 60079-11 Zone 0, 1 & 2
Ex n Non–sparkingElectrical apparatus in normal operating conditions and in certain specifi ed abnormal conditions, that is not capable of igniting a surrounding explosive gas atmosphere.
IEC 60079-15 Zone 2
Ex m EncapsulationParts that are capable of igniting an explosive atmosphere by either sparking or heating, are enclosed in a compound so that the explosive atmosphere cannot be ignited under operating or installation conditions.
IEC 60079-18 Zone 0, 1 & 2
Ex t Dust Protection by Enclosure Electrical equipment is protected by the enclosure and surface temperature limitation for use in explosive and dust atmospheres.
IEC 60079-31 Zone 20, 21 & 22
Alu
min
ium
Ex
d E
ncl
osu
res
18 Hazardous Areas
ALUMINIUM EX D ENCLOSURESZONES 1 & 2, 21 & 22
MATERIALS• Body – Marine grade copper free aluminium body and cover• Fixings – Stainless steel external screws• Mounting plate – Hot dip galvanised steel or aluminium
INCLUSIONS• Customised etched identification label• Earth stud• Hinged lid• Entries, terminals and operators arranged to suit customer requirements
OPTIONS• External epoxy painting with colour on request• Internal anti-condensate painting orange RAL-2004• O-ring gaskets and glass windows on cover• Drain and breather valves
AMBIENT TEMPERATURE-60ºC ~ 130ºC
CONFORMITYIECEx 60079-0:2007IECEx 60079-1:2007IECEx 60079-11:2006IECEx 60079-31:2008
OVERVIEWThe rectangular Ex d enclosure is constructed from aluminium alloy and is suitable for use in hazardous areas with the most demanding conditions. These enclosures are designed to house terminals, electrical equipment and cable terminations. They can be configured for custom built applications such as motor starters, circuit breakers and local control stations. Suitable for application across many industries where reliability and safety are of the highest priority such as offshore, mining and metals, marine, oil & gas, petrochemical and manufacturing industries.
PROTECTIONTerminal BoardsEx db IIB+H2 T6-T3Ex db [ia/ib] IIB+H2 T6-T3Extb IIIC T85ºC – T150ºC
Power UnitsII 2 G Ex d IIB+H2 T6-T3II2 D ex tD A21 T85ºC-150ºC
Control and signallingII2 G Ex d IIB+H2 T6-T3II2 (1) G Ex d [ia] IIB+H2 T6-T3II2 (2) G Ex d [ib] IIB+H2 T6-T3II2 D Ex tD A21 T85ºC-150ºC
IP66
TERMINAL INFORMATION (Reference Guide Only)
Catalogue No.
TerminalsMax. number of operators2.5mm2 6.0mm2 10.0mm2 16.0mm2 35.0mm2 50.0mm2 70.0mm2 240.0mm2
FEJB-11 12 x 1 8 x 1 6 x 1 4 x 1 2 x 1 – – – 6
FEJB-21 30 x 1 20 x 1 14 x 1 12 x 1 8 x 1 6 x 1 2 x 1 1 x 1 12
FEJB-22 44 x 1 30 x 1 20 x 1 18 x 1 12 x 1 10 x 1 4 x 1 2 x 1 12
FEJB-23 35 x 1 22 x 1 16 x 1 14 x 1 11 x 1 9 x 1 7 x 1 2 x 1 16
FEJB-30 52 x 2 32 x 2 24 x 2 20 x 2 14 x 2 12 x 1 8 x 1 4 x 1 30
FEJB-31 52 x 2 32 x 2 24 x 2 20 x 2 14 x 2 12 x 1 8 x 1 4 x 1 30
FEJB-51 80 x 2 46 x 2 36 x 2 30 x 2 22 x 2 18 x 2 16 x 1 6 x 1 54
FEJB-61 92 x 3 58 x 3 46 x 3 38 x 3 28 x 3 26 x 2 22 x 2 12 x 1 56
FEJB-63 92 x 3 58 x 3 46 x 3 38 x 3 28 x 3 26 x 2 22 x 2 12 x 1 56
FEJB-71 110 x 3 70 x 3 56 x 3 46 x 3 34 x 3 28 x 2 24 x 2 12 x 1 48
FEJB-73 110 x 3 70 x 3 56 x 3 46 x 3 34 x 3 28 x 2 24 x 2 12 x 1 48
FEJB-91 140 x 3 90 x 3 70 x 3 60 x 3 44 x 3 36 x 3 32 x 2 14 x 2 54
FEJB-73 140 x 3 90 x 3 70 x 3 60 x 3 44 x 3 36 x 3 32 x 2 14 x 2 54
brenclosures.com.au Hazardous Areas 19
ALUMINIUM EX D ENCLOSURESZONES 1 & 2, 21 & 22
SELECTION GUIDE
DRILLING LAYOUT
TECHNICAL DRAWINGS
Alu
min
ium
Ex d
Enc
losu
res
Catalogue No.
Dimensions (mm) Fixings (mm) Internal Dimensions (mm)
Height(A)
Width(B)
Depth(D)
Height(E)
Width(F)
Height(H)
Width(G) Depth Weight (kg)
FEJB-11 175 175 125 78 165 115 90 115 3.6
FEJB-21 285 245 169 160 245 217 122 175 10.5
FEJB-22 300 200 220 195 190 235 175 135 12.5
FEJB-23 310 260 197 195 238 247 152 195 15.0
FEJB-30 415 315 168 294 288 340 120 245 18.5
FEJB-31 415 315 250 294 288 340 200 245 20.5
FEJB-51 566 366 257 360 343 495 203 295 36.5
FEJB-61 670 470 360 500 437 595 310 395 57.0
FEJB-63 670 470 235 500 437 595 184 395 47.0
FEJB-71 742 542 425 520 580 645 360 445 110.0
FEJB-73 742 542 308 520 532 645 215 445 90.0
FEJB-91 960 660 460 700 650 830 370 530 202.0
FEJB-93 960 660 305 700 650 830 193 530 145.0
Catalogue No.
Drilling Area (mm)
Width Quantity allowed entries for size Height Quantity allowed entries for size
A B 1 2 3 4 5 6 7 8 C D 1 2 3 4 5 6 7 8
FEJB-11 100 60 3 2 2 1 1 – – – 100 60 3 2 2 1 1 – – –
FEJB-21 200 90 10 7 5 3 2 2 1 – 160 90 8 5 4 3 2 1 1 –
FEJB-22 215 130 15 11 8 6 6 3 2 1 110 130 9 5 5 4 2 1 1 1
FEJB-23 215 105 11 8 6 4 3 3 2 1 165 105 9 6 6 5 2 2 1 1
FEJB-30 320 65 13 7 5 5 4 3 – – 225 65 9 5 4 3 3 2 – –
FEJB-31 320 150 28 18 14 11 8 6 3 2 225 150 20 12 9 8 6 5 2 1
FEJB-51 460 155 44 27 24 20 12 10 6 3 255 155 24 15 12 11 6 6 3 2
FEJB-61 550 220 72 50 36 32 21 21 14 8 350 250 48 30 24 20 12 12 8 6
FEJB-63 550 130 36 29 18 16 14 7 5 4 350 130 24 17 12 10 8 4 3 3
FEJB-71 570 270 90 55 46 39 32 21 15 10 370 270 48 35 35 24 20 15 12 6
FEJB-73 570 160 40 26 22 18 14 12 7 4 370 160 26 18 14 12 8 11 4 2
FEJB-91 745 290 112 84 65 55 40 28 23 14 440 290 70 42 35 35 24 18 13 8
FEJB-93 745 145 48 42 29 22 10 11 9 5 440 145 30 24 21 14 12 7 5 3
THREAD SIZE TABLE
Size UNI 6125 ISO 228/1 ASA B2.1 ISO 965/I
1 GK ½" G ½ ½" NPT M20
2 GK ¾" G ¾" ¾" NPT M25
3 GK 1" G 1" 1" NPT M32
4 GK 1¼" G 1¼" 1¼" NPT M40
5 GK 1½" G 1½" 1½" NPT M50
6 GK 2" G 2" 2" NPT M63
7 GK 2½" G 2½" 2½" NPT M75
8 GK 3" G 3" 3" NPT M85
▲
▲
▲
▲
A
C
▲
▲
▲
▲▲
▲
B
E
D
Dilling layout – front view
Dilling layout – cover
Dilling layout – side view
▲
▲▲
▲▲ ▲▲A
Dilling layout front view
▲ ▲F▲ ▲B
▲
▲
A
▲ ▲▲
▲
▲▲
E
FG
▲
▲
▲
▲
D
H
En
clo
sure
s
22 Hazardous Areas
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 Gb, Zone 2 onlyEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +40ºC (to +55ºC)
Australian Made
Australian Owned
IP65/66/67
SLOPING ROOF TERMINAL BOXZONES 1 & 2, 21 & 22
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Fixings – 316 stainless steel• Surface finish – N4
INCLUSIONS• Steel mounting pan• 7mm stainless steel lock• External mounting flange• Internal and external 6mm or 8mm
earth stud• 3mm stainless steel gland plate• Earth strap kit
OVERVIEWSuitable for use in hazardous areas with the most demanding conditions. The 40º sloping roof minimises the build up of solids on the roof of the enclosure. The 40mm overhang ensures material that slides off the roof is directed away from the top of the door. A complete arrangement of terminals can be fitted ranging from 2.5mm to 300mm. This enclosure also caters for IS terminals.
FEATURES• Customised etched identification label• 40º sloping roof and 40mm overhang• Keyed entry with 7mm stainless steel square lock• Other labelling options available• Threaded entries in gland plate versions• IP66 windows available• Brass gland plate option with up to 3 gland plates available
Bottom ViewWith Internals
▲ ▲L
▲
▲
M
Front View Side ViewWith Internals
▲
▲
▲
▲
▲
▲▲
C
I
▲
▲40
▲16▲
A
▲
D
▲
▲
▲ ▲▲F
▲
▲
A
▲
E
B
Is indicative of lock position when there is only one lock on enclosures
Front ViewWith Internals
▲
▲
G
▲▲ H
▲ ▲K
▲
▲
J
TECHNICAL DRAWINGS
brenclosures.com.au Hazardous Areas 23
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SLOPING ROOF TERMINAL BOXZONES 1 & 2, 21 & 22
SELECTION GUIDE
TERMINAL INFORMATION (Reference Guide ONLY)
Terminal Size
Catalogue No.2.5mm2@ 20A
2.5mm2Derated to 10A
4mm2 @ 28A
6mm2@ 36A
10mm2@ 50A
35mm2@ 109A
2.5mm2Instrumentation @ 1A
TBKS030215 13 50 10 9 8 5 25
TBKS030420 12 48 9 8 7 4 105
TBKS040315 11 46 9 8 7 4 110
TBKS040420 12 50 10 8 7 5 165
TBKS040620 13 50 10 9 8 5 275
TBKS040630 16 63 12 11 9 6 275
TBKS060420 16 63 12 11 9 6 275
TBKS060630 20 80 16 14 12 8 455
TBKS080620 19 78 16 14 12 8 455
TBKS080630 25 100 20 18 15 10 625
TBKS100620 23 93 18 16 14 10 790
TBKS120830 48 190 38 35 30 21 1110
Dimensions (mm)
External Mounting Centres OpeningUsable Depth Mounting Pan Gland Opening Gland Plate
Catalogue No. Description A B C D E F G H I J K L M Width Depth No. of Locks
TBKS030215/G0
No gland plate
300 200 150 550 510 100 255 155 105 250 150 – – – – 1
TBKS030420/G0 300 400 200 610 570 300 255 355 155 250 350 – – – – 1
TBKS040315/G0 400 300 150 650 610 200 355 255 105 350 250 – – – – 1
TBKS040420/G0 400 400 200 710 670 300 355 355 155 350 350 – – – – 1
TBKS040620/G0 400 600 200 710 670 500 355 555 155 350 550 – – – – 1
TBKS040630/G0 400 600 300 795 755 500 355 555 255 350 550 – – – – 1
TBKS060420/G0 600 400 200 910 870 300 555 355 155 550 350 – – – – 1
TBKS060630/G0 600 600 300 995 955 500 555 555 255 550 550 – – – – 1
TBKS080620/G0 800 600 200 1110 1070 500 755 555 155 750 550 – – – – 2
TBKS080630/G0 800 600 300 1195 1155 500 755 555 255 750 550 – – – – 2
TBKS100620/G0 1000 600 200 1310 1270 500 955 555 155 950 550 – – – – 2
TBKS120830/G0 1200 800 300 1595 1555 700 1155 755 255 1150 750 – – – – 2
TBKS030215
1 x bottom gland plate
300 200 150 550 510 100 255 155 105 250 150 100 55 140 95 1
TBKS030420 300 400 200 610 570 300 255 355 155 250 350 300 105 340 145 1
TBKS040315 400 300 150 650 610 200 355 255 105 350 250 200 55 240 95 1
TBKS040420 400 400 200 710 670 300 355 355 155 350 350 300 105 340 145 1
TBKS040620 400 600 200 710 670 500 355 555 155 350 550 500 105 540 145 1
TBKS040630 400 600 300 795 755 500 355 555 255 350 550 500 205 540 245 1
TBKS060420 600 400 200 910 870 300 555 355 155 550 350 300 105 340 145 1
TBKS060630 600 600 300 995 955 500 555 555 255 550 550 500 205 540 245 1
TBKS080620 800 600 200 1110 1070 500 755 555 155 750 550 500 105 540 145 2
TBKS080630 800 600 300 1195 1155 500 755 555 255 750 550 500 205 540 245 2
TBKS100620 1000 600 200 1310 1270 500 955 555 155 950 550 500 105 540 145 2
TBKS120830 1200 800 300 1595 1555 700 1155 755 255 1150 750 700 205 740 245 2
TBKS030215/G3
1 bottom gland plate,2 side gland plates
300 200 150 550 510 100 255 155 105 250 150 100 55 140 95 1
TBKS030420/G3 300 400 200 610 570 300 255 355 155 250 350 300 105 340 145 1
TBKS040315/G3 400 300 150 650 610 200 355 255 105 350 250 200 55 240 95 1
TBKS040420/G3 400 400 200 710 670 300 355 355 155 350 350 300 105 340 145 1
TBKS040620/G3 400 600 200 710 670 500 355 555 155 350 550 500 105 540 145 1
TBKS040630/G3 400 600 300 795 755 500 355 555 255 350 550 500 205 540 245 1
TBKS060420/G3 600 400 200 910 870 300 555 355 155 550 350 300 105 340 145 1
TBKS060630/G3 600 600 300 995 955 500 555 555 255 550 550 500 205 540 245 1
TBKS080620/G3 800 600 200 1110 1070 500 755 555 155 750 550 500 105 540 145 2
TBKS080630/G3 800 600 300 1195 1155 500 755 555 255 750 550 500 205 540 245 2
TBKS100620/G3 1000 600 200 1310 1270 500 955 555 155 950 550 500 105 540 145 2
TBKS120830/G3 1200 800 300 1595 1555 700 1155 755 255 1150 750 700 205 740 245 2
Please Note: • Other confi gurations and terminal sizes available, please contact your local B&R sales offi ce for evaluation and wattage calculations.• Quantities for instrumentation has been determined based on 1Amp with consideration to the size of the enclosure.
Term
inal
Box
es
24 Hazardous Areas
FLAT ROOF TERMINAL BOXZONES 1 & 2, 21 & 22
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 GcEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +40ºC / 55ºC option
Australian Made
Australian Owned
IP65/66/67
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Fixings – 316 stainless steel• Surface finish – N4
INCLUSIONS• Steel mounting pan• 3mm stainless steel or 6mm brass
gland plate• 7mm stainless steel lock• Internal and external 6mm or 8mm
earth stud• Earth strap kit• Stainless steel label bracket
OVERVIEWThe flat roof keyed terminal box is made from 316 stainless steel and is suitable for use in hazardous areas with the most demanding conditions. The enclosures are suitable forZones 1 & 2, 21 & 22 applications where flammable liquids, gases & vapours or combustible dusts are frequently present. A complete arrangement of terminals can be fitted ranging from 2.5mm to 300mm.This enclosure also caters for IS terminals.
FEATURES• Customised etched identification label• Keyed entry with 7mm square stainless steel lock• Steel mounting pan• Internal and external 6mm earth stud, 8mm option• Replaceable gaskets• Wall-mounting brackets – M8 fixings• Other label options available• Threaded entries on gland plate versions• IP66 windows availble• Brass gland plate option up to 3 gland plates available
TECHNICAL DRAWINGS
Front View
▲
▲
A
▲ ▲B
Is indicative of lock position when there is one lock on enclosure
Front ViewWith Internals
Side View
▲
▲
E
▲
▲
G
▲ ▲H
Bottom View
▲ ▲C
▲
▲
D
brenclosures.com.au Hazardous Areas 25
FLAT ROOF TERMINAL BOXZONES 1 & 2, 21 & 22
Dimensions (mm)
External Opening Mounting Pan Gland Opening Gland PlateWall Mount
BracketsNo of LocksCatalogue No. Description A B C D E F G H I J K Width Depth
TBKF030215/G0
No gland plate
300 200 150 108 – 255 155 250 150 – – – – 4 1
TBKF030420/G0 300 400 200 158 – 255 355 250 350 – – – – 4 1
TBKF040315/G0 400 300 150 108 – 355 255 350 250 – – – – 4 1
TBKF040420/G0 400 400 200 158 – 355 355 350 350 – – – – 4 1
TBKF040620/G0 400 600 200 158 – 355 555 350 550 – – – – 4 1
TBKF040630/G0 400 600 300 258 – 355 555 350 550 – – – – 4 1
TBKF060420/G0 600 400 200 158 – 555 355 550 350 – – – – 4 1
TBKF060630/G0 600 600 300 258 – 555 555 550 550 – – – – 4 1
TBKF080620/G0 800 600 200 158 – 755 555 750 550 – – – – 6 2
TBKF080630/G0 800 600 300 258 – 755 555 750 550 – – – – 6 2
TBKF100620/G0 1000 600 200 158 – 955 555 950 550 – – – – 6 2
TBKF120830/G0 1200 800 300 258 – 1155 755 1150 750 – – – – 8 2
TBKF030215
1 x bottom gland plate
300 200 150 108 318 255 155 250 150 100 55 140 95 4 1
TBKF030420 300 400 200 158 318 255 355 250 350 300 105 340 145 4 1
TBKF040315 400 300 150 108 418 355 255 350 250 200 55 240 95 4 1
TBKF040420 400 400 200 158 418 355 355 350 350 300 105 340 145 4 1
TBKF040620 400 600 200 158 418 355 555 350 550 500 105 540 145 4 1
TBKF040630 400 600 300 258 418 355 555 350 550 500 205 540 245 4 1
TBKF060420 600 400 200 158 618 555 355 550 350 300 105 340 145 4 1
TBKF060630 600 600 300 258 618 555 555 550 550 500 205 540 245 4 1
TBKF080620 800 600 200 158 818 755 555 750 550 500 105 540 145 6 2
TBKF080630 800 600 300 258 818 755 555 750 550 500 205 540 245 6 2
TBKF100620 1000 600 200 158 1018 955 555 950 550 500 105 540 145 6 2
TBKF120830 1200 800 300 258 1218 1155 755 1150 750 700 205 740 245 8 2
TBKF030215/G3
1 bottom gland plate,2 side gland plates
300 200 150 108 318 255 155 250 150 100 55 140 95 4 1
TBKF030420/G3 300 400 200 158 318 255 355 250 350 300 105 340 145 4 1
TBKF040315/G3 400 300 150 108 418 355 255 350 250 200 55 240 95 4 1
TBKF040420/G3 400 400 200 158 418 355 355 350 350 300 105 340 145 4 1
TBKF040620/G3 400 600 200 158 418 355 555 350 550 500 105 540 145 4 1
TBKF040630/G3 400 600 300 258 418 355 555 350 550 500 205 540 245 4 1
TBKF060420/G3 600 400 200 158 618 555 355 550 350 300 105 340 145 4 1
TBKF060630/G3 600 600 300 258 618 555 555 550 550 500 205 540 245 4 1
TBKF080620/G3 800 600 200 158 818 755 555 750 550 500 105 540 145 6 2
TBKF080630/G3 800 600 300 258 818 755 555 750 550 500 205 540 245 6 2
TBKF100620/G3 1000 600 200 158 1018 955 555 950 550 500 105 540 145 6 2
TBKF120830/G3 1200 800 300 258 1218 1155 755 1150 750 700 205 740 245 8 2
Terminal Size
Catalogue No.2.5mm2@ 20A
2.5mm2Derated to 10A
4mm2 @ 28A
6mm2@ 36A
10mm2@ 50A
35mm2 @ 109A
2.5mm2Instrumentation @ 1A
TBKF030215 13 50 10 9 8 5 25
TBKF030420 12 48 9 8 7 4 105
TBKF040315 11 46 9 8 7 4 110
TBKF040420 12 50 10 8 7 5 165
TBKF040620 13 50 10 9 8 5 275
TBKF040630 16 63 12 11 9 6 275
TBKF060420 16 63 12 11 9 6 275
TBKF060630 20 80 16 14 12 8 455
TBKF080620 19 78 16 14 12 8 455
TBKF080630 25 100 20 18 15 10 625
TBKF100620 23 93 18 16 14 10 790
TBKF120830 48 190 38 35 30 21 1110
TERMINAL INFORMATION (Reference Guide ONLY)
Please Note: • Other confi gurations and terminal sizes available, please contact your local B&R sales offi ce for evaluation and wattage calculations.• Quantities for instrumentation has been determined based on 1Amp with consideration to the size of the enclosure.
Term
inal
Box
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
26 Hazardous Areas
FLAT ROOF TERMINAL BOXZONES 1 & 2, 21 & 22
IP65/66/67
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Fixings – 316 stainless steel• Surface finish – N4
INCLUSIONS• Mounting flanges• External earth stud• Internal earth strap kit
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 GcEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +40ºC / 55ºC option
OVERVIEWThe flat roof screwed terminal box is made from 316 stainless steel and is suitable for use in hazardous areas with the most demanding conditions. These enclosures are suitable for Zones 1&2, 21&22 applications where flammable liquids, gases & vapours or combustible dusts are frequently present.
FEATURES• Customised etched identification label• Screwed lid• Mounting flanges• Mounting pan option available• External earth stud• Stainless steel fixings• Internal earth strap kit
TERMINAL INFORMATION (Reference Guide ONLY)
Terminal Size
Catalogue No.2.5mm2@ 20A
2.5mm2Derated to 10A
4mm2 @ 28A
6mm2@ 36A
2.5mm2Instrumentation @ 1A
TBSF010108 15 15 10 10 15
TBSF020212 12 20 12 10 20
TBSF030212 11 40 11 9 40
TBSF040212 12 45 9 8 50
TBSF060212 13 35 7 6 80
Please Note: • Other confi gurations and terminal sizes available, please contact your local B&R sales offi ce for evaluation and wattage calculations.• Quantities for instrumentation has been determined based on 1Amp with consideration to the size of the enclosure.• 10mm2 and 35mm2 available on request, cable / entry size to be considered.
Australian Made
Australian Owned
brenclosures.com.au Hazardous Areas 27
FLAT ROOF TERMINAL BOXZONES 1 & 2, 21 & 22
Catalogue No.
Dimensions (mm) Fixings (mm) Opening
No. of FixingsHeight
(A)Width
(B)Depth
(C)Usable Depth
(D)Distance from Wall
(E)Height
(F)Width
(G)Height
(H)Width
(I)
TBSF010108 150 150 80 27 90 175 100 125 125 4
TBSF020212 200 200 120 67 130 225 150 175 175 4
TBSF030212 300 200 120 67 130 325 150 275 175 4
TBSF040212 400 200 120 67 130 425 150 375 175 4
TBSF060212 600 200 120 67 130 625 150 575 175 4
TECHNICAL DRAWINGS
▲ ▲B
▲ ▲G
▲
▲
F
▲
▲
A
ø8.5 hole size
6mm earth stud
Front View
▲ ▲I
▲
▲
H
Front View With Internals Side View
▲ ▲
▲ ▲C
E
▲ ▲D
Term
inal
Box
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
28 Hazardous Areas
STAINLESS STEEL TERMINAL BOXZONES 1 & 2, 21 & 22
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Fixings – 316 stainless steel• Surface finish – N4
INCLUSIONS• Mounting flanges• External earth stud• Internal earth strap kit
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 GcEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +55ºC
OVERVIEWThe flat roof screwed terminal box is made from 316 stainless steel and is suitable for use in hazardous areas with the most demanding conditions. These enclosures are suitable for Zones 1 & 2, 21 & 22 applications where flammable liquids, gases & vapours or combustible dust are frequently present.
FEATURES• Customised etched identification label• Screwed lid• Mounting flanges• Stainless steel fixings• Earth strap kit• Optional steel mounting pan
IP65/66
Australian Made
Australian Owned
brenclosures.com.au Hazardous Areas 29
STAINLESS STEEL TERMINAL BOXZONES 1 & 2, 21 & 22
Catalogue No.
External Dimensions (mm) Fixings (mm) Lid Fixings (mm)
DescriptionHeight
(A)Width
(B)Depth
(C)Distance from wall
(D)Height
(E)Width
(F)Height
(G)Width
(H)
TBSFCS11 Single gang 112 90 90 91 132 67 77 73
TBSFCS12 Double gang 159 90 90 91 179 67 124 73
TBSFCS13 Three gang 205 90 90 91 225 67 170 73
TBSFCS14 Four gang 250 90 90 91 270 67 215 73
TBSFCS16 Six gang 343 90 90 91 363 67 308 73
TECHNICAL DRAWINGS
Front View
▲ ▲F▲ ▲H
▲ ▲B
▲
▲
G
▲
▲
E
▲
▲
A
Side View
▲
▲
G
▲ ▲D▲ ▲C
Section View
Term
inal
Box
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
30 Hazardous Areas
SLOPING ROOF CUSTOM BUILT CONTROL BOXZONES 1 & 2, 21 & 22
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 Gb, Zone 2 onlyEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +40ºC (to +55ºC)
IP65/66
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Fixings – 316 stainless steel• Surface finish – N4
INCLUSIONS• Steel mounting pan• 7mm stainless steel lock• External mounting flange• Internal and external 6mm or 8mm
earth stud• 3mm stainless steel gland plate• Earth strap kit• No gland plate option
OVERVIEWSuitable for use in hazardous areas with the most demanding conditions. The 40º sloping roof minimises the build up of solids on the roof of the enclosure. The 40mm overhang ensures material that slides off the roof is directed away from the top of the door.
FEATURES• Customised etched identification label• 40º sloping roof and 40mm overhang• Keyed entry with 7mm stainless steel square lock• Other labelling options available• Threaded entries in gland plate versions• IP66 windows available• Brass gland plate option with up to 3 gland plates available
CONTROLS / OPERATORSOther controls / operators are available including:
• Pushbuttons• Isolating switches• Key switches• Pilot lights• Ammeters• Circuit breakers• Motor starters• Viewing windows
Australian Made
Australian Owned
brenclosures.com.au Hazardous Areas 31
SLOPING ROOF CUSTOM BUILT CONTROL BOXZONES 1 & 2, 21 & 22
Dimensions (mm)
External Mounting Centres Opening Usable Depth Mounting Pan Gland Opening Gland PlateNo of
locksCatalogue No. Description A B C D E F G H I J K L M Width Depth
CBKS030215/G0
No gland plate
300 200 150 550 510 100 255 155 105 250 150 – – – – 1
CBKS030420/G0 300 400 200 610 570 300 255 355 155 250 350 – – – – 1
CBKS040315/G0 400 300 150 650 610 200 355 255 105 350 250 – – – – 1
CBKS040420/G0 400 400 200 710 670 300 355 355 155 350 350 – – – – 1
CBKS040620/G0 400 600 200 710 670 500 355 555 155 350 550 – – – – 1
CBKS040630/G0 400 600 300 795 755 500 355 555 255 350 550 – – – – 1
CBKS060420/G0 600 400 200 910 870 300 555 355 155 550 350 – – – – 1
CBKS060630/G0 600 600 300 995 955 500 555 555 255 550 550 – – – – 1
CBKS080620/G0 800 600 200 1110 1070 500 755 555 155 750 550 – – – – 2
CBKS080630/G0 800 600 300 1195 1155 500 755 555 255 750 550 – – – – 2
CBKS100620/G0 1000 600 200 1310 1270 500 955 555 155 950 550 – – – – 2
CBKS120830/G0 1200 800 300 1595 1555 700 1155 755 255 1150 750 – – – – 2
CBKS030215
1 x bottom gland plate
300 200 150 550 510 100 255 155 105 250 150 100 55 140 95 1
CBKS030420 300 400 200 610 570 300 255 355 155 250 350 300 105 340 145 1
CBKS040315 400 300 150 650 610 200 355 255 105 350 250 200 55 240 95 1
CBKS040420 400 400 200 710 670 300 355 355 155 350 350 300 105 340 145 1
CBKS040620 400 600 200 710 670 500 355 555 155 350 550 500 105 540 145 1
CBKS040630 400 600 300 795 755 500 355 555 255 350 550 500 205 540 245 1
CBKS060420 600 400 200 910 870 300 555 355 155 550 350 300 105 340 145 1
CBKS060630 600 600 300 995 955 500 555 555 255 550 550 500 205 540 245 1
CBKS080620 800 600 200 1110 1070 500 755 555 155 750 550 500 105 540 145 2
CBKS080630 800 600 300 1195 1155 500 755 555 255 750 550 500 205 540 245 2
CBKS100620 1000 600 200 1310 1270 500 955 555 155 950 550 500 105 540 145 2
CBKS120830 1200 800 300 1595 1555 700 1155 755 255 1150 750 700 205 740 245 2
CBKS030215/G3
1 bottom gland plate,2 side gland plates
300 200 150 550 510 100 255 155 105 250 150 100 55 140 95 1
CBKS030420/G3 300 400 200 610 570 300 255 355 155 250 350 300 105 340 145 1
CBKS040315/G3 400 300 150 650 610 200 355 255 105 350 250 200 55 240 95 1
CBKS040420/G3 400 400 200 710 670 300 355 355 155 350 350 300 105 340 145 1
CBKS040620/G3 400 600 200 710 670 500 355 555 155 350 550 500 105 540 145 1
CBKS040630/G3 400 600 300 795 755 500 355 555 255 350 550 500 205 540 245 1
CBKS060420/G3 600 400 200 910 870 300 555 355 155 550 350 300 105 340 145 1
CBKS060630/G3 600 600 300 995 955 500 555 555 255 550 550 500 205 540 245 1
CBKS080620/G3 800 600 200 1110 1070 500 755 555 155 750 550 500 105 540 145 2
CBKS080630/G3 800 600 300 1195 1155 500 755 555 255 750 550 500 205 540 245 2
CBKS100620/G3 1000 600 200 1310 1270 500 955 555 155 950 550 500 105 540 145 2
CBKS120830/G3 1200 800 300 1595 1555 700 1155 755 255 1150 750 700 205 740 245 2
TECHNICAL DRAWINGS
Bottom View With Internals
▲ ▲L
▲
▲
M
Front View Side ViewWith Internals
▲
▲
▲
▲
▲
▲▲
C
I
▲
▲40
▲16▲
A
▲
D
▲
▲
▲ ▲▲F
▲
▲
A
▲
E
B
Is indicative of lock position when there is only one lock on enclosures
Front ViewWith Internals
▲
▲
G
▲▲ H
▲ ▲K
▲
▲
J
Con
trol
Box
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
32 Hazardous Areas
FLAT ROOF CUSTOM BUILT CONTROL BOXZONES 1 & 2, 21 & 22
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 GcEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +40ºC / 55ºC option
Australian Made
Australian Owned
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Fixings – 316 stainless steel• Surface finish – N4
INCLUSIONS• Steel mounting pan• 3mm stainless steel or 6mm brass
gland plate• 7mm stainless steel lock• Internal and external 6mm or 8mm
earth stud• Earth strap kit• Stainless steel label bracket
OVERVIEWThe flat roof keyed control box is made from 316 stainless steel and is suitable for use in hazardous areas with the most demanding conditions. The enclosures are suitable forZones 1 & 2, 21 & 22 applications where flammable liquids, gases & vapours or combustible dusts are frequently present
CONTROLS / OPERATORSOther controls / operators are available including:
• Pushbuttons• Isolating switches• Key switches• Pilot lights• Ammeters• Circuit breakers• Motor starters• Viewing windows
FEATURES• Customised etched identification label• Keyed entry with 7mm square stainless steel lock• Steel mounting pan• Internal and external 6mm earth stud, 8mm option• Replaceable gaskets• Wall-mounting brackets – M8 fixings• Other label options available• Threaded entries on gland plate versions• IP66 windows availble• Brass gland plate option up to 3 gland plates available
IP65/66
brenclosures.com.au Hazardous Areas 33
FLAT ROOF CUSTOM BUILT CONTROL BOXZONES 1 & 2, 21 & 22
Dimensions (mm)
External Opening Mounting Pan Gland Opening Gland PlateWall Mount
BracketsNo of LocksCatalogue No. Description A B C D E F G H I J K Width Depth
CBKF030215/G0
No gland plate
300 200 150 108 – 255 155 250 150 – – – – 4 1
CBKF030420/G0 300 400 200 158 – 255 355 250 350 – – – – 4 1
CBKF040315/G0 400 300 150 108 – 355 255 350 250 – – – – 4 1
CBKF040420/G0 400 400 200 158 – 355 355 350 350 – – – – 4 1
CBKF040620/G0 400 600 200 158 – 355 555 350 550 – – – – 4 1
CBKF040630/G0 400 600 300 258 – 355 555 350 550 – – – – 4 1
CBKF060420/G0 600 400 200 158 – 555 355 550 350 – – – – 4 1
CBKF060630/G0 600 600 300 258 – 555 555 550 550 – – – – 4 1
CBKF080620/G0 800 600 200 158 – 755 555 750 550 – – – – 6 2
CBKF080630/G0 800 600 300 258 – 755 555 750 550 – – – – 6 2
CBKF100620/G0 1000 600 200 158 – 955 555 950 550 – – – – 6 2
CBKF120830/G0 1200 800 300 258 – 1155 755 1150 750 – – – – 8 2
CBKF030215
1 x bottom gland plate
300 200 150 108 318 255 155 250 150 100 55 140 95 4 1
CBKF030420 300 400 200 158 318 255 355 250 350 300 105 340 145 4 1
CBKF040315 400 300 150 108 418 355 255 350 250 200 55 240 95 4 1
CBKF040420 400 400 200 158 418 355 355 350 350 300 105 340 145 4 1
CBKF040620 400 600 200 158 418 355 555 350 550 500 105 540 145 4 1
CBKF040630 400 600 300 258 418 355 555 350 550 500 205 540 245 4 1
CBKF060420 600 400 200 158 618 555 355 550 350 300 105 340 145 4 1
CBKF060630 600 600 300 258 618 555 555 550 550 500 205 540 245 4 1
CBKF080620 800 600 200 158 818 755 555 750 550 500 105 540 145 6 2
CBKF080630 800 600 300 258 818 755 555 750 550 500 205 540 245 6 2
CBKF100620 1000 600 200 158 1018 955 555 950 550 500 105 540 145 6 2
CBKF120830 1200 800 300 258 1218 1155 755 1150 750 700 205 740 245 8 2
CBKF030215/G3
1 bottom gland plate,2 side gland plates
300 200 150 108 318 255 155 250 150 100 55 140 95 4 1
CBKF030420/G3 300 400 200 158 318 255 355 250 350 300 105 340 145 4 1
CBKF040315/G3 400 300 150 108 418 355 255 350 250 200 55 240 95 4 1
CBKF040420/G3 400 400 200 158 418 355 355 350 350 300 105 340 145 4 1
CBKF040620/G3 400 600 200 158 418 355 555 350 550 500 105 540 145 4 1
CBKF040630/G3 400 600 300 258 418 355 555 350 550 500 205 540 245 4 1
CBKF060420/G3 600 400 200 158 618 555 355 550 350 300 105 340 145 4 1
CBKF060630/G3 600 600 300 258 618 555 555 550 550 500 205 540 245 4 1
CBKF080620/G3 800 600 200 158 818 755 555 750 550 500 105 540 145 6 2
CBKF080630/G3 800 600 300 258 818 755 555 750 550 500 205 540 245 6 2
CBKF100620/G3 1000 600 200 158 1018 955 555 950 550 500 105 540 145 6 2
CBKF120830/G3 1200 800 300 258 1218 1155 755 1150 750 700 205 740 245 8 2
TECHNICAL DRAWINGS
Front View
▲
▲
A
▲ ▲B
Is indicative of lock position when there is one lock on enclosure
Front ViewWith Internals
Side View
▲
▲
E
▲
▲
G
▲ ▲H
Bottom View
▲ ▲C
▲
▲
D
Con
trol
Box
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
34 Hazardous Areas
FLAT ROOF CUSTOM BUILT CONTROL BOXZONES 1 & 2, 21 & 22
Australian Made
Australian Owned
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Fixings – 316 stainless steel• Surface finish – N4
INCLUSIONS• Mounting flanges• External earth stud• Internal earth strap kit
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 GcEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +40ºC / 55ºC option
OVERVIEWThe flat roof screwed terminal box is made from 316 stainless steel and is suitable for use in hazardous areas with the most demanding conditions. These enclosures are suitable for Zones 1 & 2, 21 & 22 applications where flammable liquids, gases & vapours or combustible dusts are frequently present.
FEATURES• Customised etched identification label• Screwed lid• Mounting flanges• Mounting pan option available• External earth stud• Stainless steel fixings• Internal earth strap kit
IP65/66
brenclosures.com.au Hazardous Areas 35
FLAT ROOF CUSTOM BUILT CONTROL BOXZONES 1 & 2, 21 & 22
Catalogue No.
Dimensions (mm) Fixings (mm) Opening
No. of FixingsHeight
(A)Width
(B)Depth
(C)Usable Depth
(D)Distance from Wall
(E)Height
(F)Width
(G)Height
(H)Width
(I)
CBSF010108 150 150 80 27 90 175 100 125 125 4
CBSF020212 200 200 120 67 130 225 150 175 175 4
CBSF030212 300 200 120 67 130 325 150 275 175 4
CBSF040212 400 200 120 67 130 425 150 375 175 4
CBSF060212 600 200 120 67 130 625 150 575 175 4
▲ ▲B
▲ ▲G
▲
▲
F
▲
▲
A
ø8.5 hole size
6mm earth stud
Front View
▲ ▲I
▲
▲
H
Front View With Internals Side View
▲ ▲
▲ ▲C
E
▲ ▲D
TECHNICAL DRAWINGS
Con
trol
Box
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
36 Hazardous Areas
IP66
STAINLESS STEEL CONTROL STATIONZONES 1 & 2, 21 & 22
Australian Made
Australian Owned
MATERIALS• Body – 316 stainless steel• Body thickness – 1.5mm• Gasket – Replaceable• Fixings – 316 stainless steel• Surface finish – N4• Components – Certified switch mechanisms, ammeter available
INCLUSIONS• Earth strap kit
CERTIFICATIONIECEx ITA 10.0023x
PROTECTIONEx e IIC T6 GbEx nA IIC T6 GcEx de IIC T6 GbEx tD A21/22 T80ºCDIP A21/22 Ta80ºCEx t IIIC T80ºC Db
AMBIENT TEMPERATURE-20ºC ~ +40ºC / 55ºC option
OVERVIEWControl stations are manufactured from 316 stainless steel. These control stations are available pre-configured or custom-built for ease of installation from one to six operators.
FEATURES• Customised etched identification label• Screwed lid• Mounting flanges• Stainless steel fixings• Earth strap kit
TECHNICAL DRAWINGS
Front View
▲ ▲B
▲
▲
A
Side View
▲ ▲C
Section View
brenclosures.com.au Hazardous Areas 37
Dimensions (mm)
Catalogue No. Type PoleHeight
(A)Width
(B)Depth
(C) Description
CSS1-P1GRN
Pushbutton
– 112 90 90 1NO+1NC, Start, Green
CSS1-P1RED – 112 90 90 1NO+1NC, Stop, Red
CSS1-P3MH – 112 90 90 1NO+1NC, emergency stop self-locking
CSS1-P2 – 112 90 90 1NO+1NC, double button, Stop-Start
CSS1-P4 – 112 90 90 1NO+1NC, mushroom head button, Black
CSS2-PGPR – 159 90 90 1NO+1NC, 2 pushbuttons Green/Red
CSS3-PGPRPB – 159 90 90 1NO+1NC, 3 pushbuttons Green/Red/Black
CSS2-P1GRNLR
Pushbutton& Lamp
– 159 90 90 1NO+1NC, Start, lamp, Red
CSS2-P1REDLR – 159 90 90 1NO+1NC, Stop, lamp, Red
CSS2-P1GRNLG – 159 90 90 1NO+1NC, Start, lamp, Green
CSS2-P1REDLG – 159 90 90 1NO+1NC, Stop, lamp, Green
CSS2-P2GRNLY – 159 90 90 1NO+1NC, Start, lamp, Yellow
CSS2-P1REDLY – 159 90 90 1NO+1NC, Stop, lamp, Yellow
CSS2-P1GRNLB – 159 90 90 1NO+1NC, Start, lamp, Blue
CSS2-P1REDLB – 159 90 90 1NO+1NC, Stop, lamp, Blue
CSS2-P1GRNLW – 159 90 90 1NO+1NC, Start, lamp, White
CSS2-P1REDLW – 159 90 90 1NO+1NC, Stop, lamp, White
CSS3-PGPRLR
Double Pushbuttonw/ Lamp
– 205 90 90 1NO+1NC, 2 pushbuttons Green/Red, lamp Red
CSS3-PGPRLG – 205 90 90 1NO+1NC, 2 pushbuttons Green/Red, lamp Green
CSS3-PGPRLY – 205 90 90 1NO+1NC, 2 pushbuttons Green/Red, lamp Yellow
CSS3-PGPRLB – 205 90 90 1NO+1NC, 2 pushbuttons Green/Red, lamp Blue
CSS3-PGPRLW – 205 90 90 1NO+1NC, 2 pushbuttons Green/Red, lamp White
CSS3-P2P3MHLR – 205 90 90 2NC, double pushbutton Red, emergency lamp Red
CSS3-P2P3MHLG – 205 90 90 2NC, double pushbutton Red, emergency lamp Green
CSS3-P2P3MHLY – 205 90 90 2NC, double pushbutton Red, emergency lamp Yellow
CSS3-P2P3MHLB – 205 90 90 2NC, double pushbutton Red, emergency lamp Blue
CSS3-P2P3MHLW – 205 90 90 2NC, double pushbutton Red, emergency lamp White
CSS1-LR
Lamp
– 112 90 90 AC24~240V, single lamp, Red
CSS1-LG – 112 90 90 AC24~240V, single lamp, Green
CSS1-LY – 112 90 90 AC24~240V, single lamp, Yellow
CSS1-LB – 112 90 90 AC24~240V, single lamp, Blue
CSS1-LW – 112 90 90 AC24~240V, single lamp, White
CSS2-P2LR
Double Lamp
– 159 90 90 1NO+1NC, AC24~240V, double pushbutton, lamp Red
CSS2-P2LG – 159 90 90 1NO+1NC, AC24~240V, double pushbutton, lamp Green
CSS2-P2LY – 159 90 90 1NO+1NC, AC24~240V, double pushbutton, lamp Yellow
CSS2-P2LB – 159 90 90 1NO+1NC, AC24~240V, double pushbutton, lamp Blue
CSS2-P2LW – 159 90 90 1NO+1NC, AC24~240V, double pushbutton, lamp White
CSS3-P2LR – 175 86 76 1NO+1NC, Red
CSS3-P2LG – 175 86 76 1NO+1NC, Green
CSS3-P2LY – 175 86 76 1NO+1NC, Yellow
CSS3-P2LB – 175 86 76 1NO+1NC, Blue
CSS3-P2LW – 175 86 76 1NO+1NC, White
CSS1-K6
Switch
2-p 112 90 90 Small handle, Ø39mm
CSS2-S6 2-p 159 90 90 Large handle, Ø60mm
CSS2-S6H4 4-p 159 90 90 2NO+2NC, LL 0
STAINLESS STEEL CONTROL STATIONZONES 1 & 2, 21 & 22
Con
trol
Box
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
38 Hazardous Areas
MATERIALS• Body – GRP UV stabilised anti-static• Stainless steel screws• Internal gland plate• Surface finish – Textured matt black
INCLUSIONS• Standard built product• Internal brass gland plates
CERTIFICATIONIECEx CQM 13.0017
PROTECTIONEx ed IIC T6Ex tD A21 IP66 T80ºC
AMBIENT TEMPERATURE-40≤Ta≤40ºC
OVERVIEWRange of standard control stations that can be combined into one unit using a maximum of six in configurations to suit the application requirements. They are light-weight, impact resistant and are suitable for use in hazardous areas where stainless steel is not a requirement.
FEATURES• Can be customised to suit requirements• UV stabilised anti-static construction• Five standard controllers in one• Easy installation• Flexible configurations• High chemical stability
IP66
Front View Side View
▲ ▲▲ ▲B c
▲ ▲E
▲
▲
▲
▲
A D
TECHNICAL DRAWINGS
NON-METALLIC CONTROL STATIONZONES 1 & 2, 21 & 22
brenclosures.com.au Hazardous Areas 39
Dimensions (mm) Mounting Centres (mm)
Catalogue No. PoleHeight
(A)Width
(B)Depth
(C)Height
(D)Width
(E) Description
CSG1-P1GRN
Pushbutton
– 95 86 76 58 73 1NO+1NC, Start, Green
CSG1-P1RED – 95 86 76 58 73 1NO+1NC, Stop, Red
CSG1-P3MH – 95 86 76 58 73 1NO+1NC, emergency stop self-locking,
CSG1-P2 – 95 86 76 58 73 1NO+1NC, double button, Stop-Start
CSG1-P4 – 95 86 76 58 73 1NO+1NC, mushroom head button, Black
CSG2-PGPR – 135 86 76 98 73 1NO+1NC, 2 pushbuttons
CSG3-PGPRPB – 135 86 76 98 73 1NO+1NC, 3 pushbuttons
CSG2-P1GRNLR
Pushbutton& Lamp
– 135 86 76 98 73 1NO+1NC, Start, lamp, Red
CSG2-P1REDLR – 135 86 76 98 73 1NO+1NC, Stop, lamp, Red
CSG2-P1GRNLG – 135 86 76 98 73 1NO+1NC, Start, lamp, Green
CSG2-P1REDLG – 135 86 76 98 73 1NO+1NC, Stop, lamp, Green
CSG2-P2GRNLY – 135 86 76 98 73 1NO+1NC, Start, lamp, Yellow
CSG2-P1REDLY – 135 86 76 98 73 1NO+1NC, Stop, lamp, Yellow
CSG2-P1GRNLB – 135 86 76 98 73 1NO+1NC, Start, lamp, Blue
CSG2-P1REDLB – 135 86 76 98 73 1NO+1NC, Stop, lamp, Blue
CSG2-P1GRNLW – 135 86 76 98 73 1NO+1NC, Start, lamp, White
CSG2-P1REDLW – 135 86 76 98 73 1NO+1NC, Stop, lamp, White
CSG3-PGPRLR – 175 86 76 138 73 1NO+1NC, 2 pushbuttons, lamp, Red
CSG3-PGPRLG – 175 86 76 138 73 1NO+1NC, 2 pushbuttons, lamp, Green
CSG3-PGPRLY – 175 86 76 138 73 1NO+1NC, 2 pushbuttons, lamp, Yellow
CSG3-PGPRLB – 175 86 76 138 73 1NO+1NC, 2 pushbuttons, lamp, Blue
CSG3-PGPRLW – 175 86 76 138 73 1NO+1NC, 2 pushbuttons, lamp, White
CSG3-P2P3MHLR
Double Pushbuttonw/ Lamp
– 175 86 76 138 73 2NC, Red emergency lamp, Red
CSG3-P2P3MHLG – 175 86 76 138 73 2NC, Red emergency lamp, Green
CSG3-P2P3MHLY – 175 86 76 138 73 2NC, Red emergency lamp, Yellow
CSG3-P2P3MHLB – 175 86 76 138 73 2NC, Red emergency lamp, Blue
CSG3-P2P3MHLW – 175 86 76 138 73 2NC, Red emergency lamp, White
CSG1-LR
Lamp
– 95 86 76 58 73 AC24~240V, single lamp, Red
CSG1-LG – 95 86 76 58 73 AC24~240V, single lamp, Green
CSG1-LY – 95 86 76 58 73 AC24~240V, single lamp, Yellow
CSG1-LB – 95 86 76 58 73 AC24~240V, single lamp, Blue
CSG1-LW – 95 86 76 58 73 AC24~240V, single lamp, White
CSG2-P2LR
Double Pushbutton
– 135 86 76 98 73 1NO+1NC, AC24~240V, double lamp, Red
CSG2-P2LG – 135 86 76 98 73 1NO+1NC, AC24~240V, double lamp, Green
CSG2-P2LY – 135 86 76 98 73 1NO+1NC, AC24~240V, double lamp, Yellow
CSG2-P2LB – 135 86 76 98 73 1NO+1NC, AC24~240V, double lamp, Blue
CSG2-P2LW – 135 86 76 98 73 1NO+1NC, AC24~240V, double lamp, White
CSG3-P2LR – 175 86 76 138 73 1NO+1NC, Red
CSG3-P2LG – 175 86 76 138 73 1NO+1NC, Green
CSG3-P2LY – 175 86 76 138 73 1NO+1NC, Yellow
CSG3-P2LB – 175 86 76 138 73 1NO+1NC, Blue
CSG3-P2LW – 175 86 76 138 73 1NO+1NC, White
CSG1-K6
Switch
2-p 95 86 76 58 73 Small handle, Ø39mm
CSG2-S6 2-p 135 86 76 98 73 Large handle, Ø60mm
CSG2-S6H4 4-p 135 86 76 138 73 2NO+2NC, LL 0
Non
-Met
allic
Encl
osur
es
SELECTION GUIDE
NON-METALLIC CONTROL STATIONZONES 1 & 2, 21 & 22
40 Hazardous Areas
MATERIALS• Body – GRP anti-static• Surface finish – Textured matt black
INCLUSIONS• Custom built to suit requirements
CERTIFICATIONIECEx CQM 13.0016x
PROTECTIONEx e II T6/T5 GbEx tD A21 IP65 T95ºC ~ T80ºC
AMBIENT TEMPERATURE-40ºC + 40ºC / 55ºC option
OVERVIEWA range of non-metallic enclosures which are impact resistant, withstand high or low termperatures and are static resistant. These terminal boxes are suitable for use in hazardous area environments to provide the ultimate in flexibility and are easy to wire and mount. A complete arrangement of terminals can be fitted ranging from 2.5mm to 300mm. The enclosure can also cater for IS terminals.
FEATURES• Earth plate for cable gland entries• Used for terminating wires for various electrical apparatus
and instruments in circuits• Can be used with with IS terminations• Ex e models must use component certified terminals
IP65
TECHNICAL DRAWINGS
Front View Side View
▲
▲
A
▲ ▲▲ ▲B C
NON-METALLIC TERMINAL BOXZONES 1 & 2, 21 & 22
brenclosures.com.au Hazardous Areas 41
Dimensions (mm) Entries Terminals
Catalogue No.Height
(A)Width
(B)Depth
(C) SizeFrom sideA, B or Z, Y
From sideC, D or S, X No. of Rows 2.5mm 4mm 6mm 10mm 16mm 32mm
TBG001 122 122 96
TBG011 170 122 96
M20 6 4
M25 4 2
M32 2 1 1 14 13 10 8 6 4
M40 2 1
M50 1 1
TBG031 220 134
M20 8 4
M25 5 2
96 M32 3 2 1 23 22 17 13 11 7
M40 3 1
M50 2 1
TBG032 220 134 141
M20 12 6
M25 8 5
M32 6 3
M40 4 2 1 14 13 10 8 6 4
M50 2 1
M63 2 1
TBG051 275 160 96
M20 10 6
M25 10 4
M32 5 2 1 31 29 23 19 16 10
M40 4 2
M50 3 1
TBG052
TBG053
TBG054
275
275
275
160
160
160
161
226
166
M20 24 12
M25 15 9
M32 11 5 1 14 13 10 8 6 4
M40 6 3
M50 5 2
M63 3 1
TBG071 352 234 96
M20 16 10
M25 10 6
M32 7 4 1 43 40 32 26 22 14
M40 5 3
M50 4 2
TBG072
TBG073
TBG074
352
352
352
234
234
234
161
231
166
M20 32 18
M25 21 12
M32 14 8
M40 10 6 1 43 40 32 26 22 14
M50 4 3
M63 4 2
TBG081 352 352 96
M20 16 16
M25 10 10 1 43 40 32 26 22 14
M32 7 7 2 86 80 64 52 44 28
M40 5 5
M50 4 4
TBG082
TBG083
TBG084
TBG085
352
352
352
352
352
352
352
352
161
231
136
166
M20 32 32
M25 21 21
M32 14 14 3 129 120 96 78 66 42
M40 10 10
M50 4 4
M63 4 4
TBG092
TBG093
TBG094
706
706
706
352
352
352
161
231
201
M20 64 32
M25 42 21
M32 28 14 1 86 80 64 52 44 28
M40 20 10 2 172 160 128 104 88 56
M50 12 6
M63 8 4
Non
-Met
allic
Encl
osur
es
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
NON-METALLIC TERMINAL BOXZONES 1 & 2, 21 & 22
42 Hazardous Areas
NON-METALLIC TERMINAL BOXZONES 1 & 2, 21 & 22
MATERIALS• Body – GRP anti-static• Surface finish – Textured matt black
INCLUSIONS• Built in terminal box• Brass gland plate• Certified plugs• Custom built to suit requirements
CERTIFICATIONIECEx CQM 13.0015x
PROTECTIONEx e II T6 GbEx tD A21 T80ºC
AMBIENT TEMPERATURE-40ºC ≤ Ta ≤ +40ºC
OVERVIEWA range of non-metallic enclosures which are impact resistant, withstand high or low termperatures and static resistant. These terminal boxes are suitable for use in hazardous area environments, provide the ultimate in flexibility and are easy to wire and mount.
FEATURES• Impact and static resistant• Withstand high or low temperatures• Cable can connect to terminals from different directions
IP66
TECHNICAL DRAWINGS
▲
▲
A
▲ ▲B
▲ ▲C
Front View Side View
brenclosures.com.au Hazardous Areas 43
Dimensions (mm) Entries Terminals
Catalogue No. Protection TypeHeight
(A)Width
(B)Depth
(C) Qty Size (mm) Location Qty Size (mm)
TBGS21ET2.5X4/220N
Ex e
95 95 62.5 2 20 Opposite sides 4 2.5
TBGS21ET2.5X4/420X 95 95 62.5 4 20 One each side 4 2.5
TBGS21ET2.5X4/225N 95 95 62.5 2 25 Opposite sides 4 2.5
TBGS21ET2.5X4/425X 95 95 62.5 4 25 One each side 4 2.5
TBGS22ET2.5X8/220N 125 125 69.5 2 20 Opposite sides 8 2.5
TBGS22ET2.5X8/420X 125 125 69.5 4 20 One each side 8 2.5
TBGS22ET2.5X8/225N 125 125 69.5 2 25 Opposite sides 8 2.5
TBGS22ET2.5X8/425X 125 125 69.5 4 25 One each side 8 2.5
TBGS22ET4X4/220N 125 125 69.5 2 20 Opposite sides 4 4
TBGS22ET4X4/420X 125 125 69.5 4 20 One each side 4 4
TBGS22ET4X4/225N 125 125 69.5 2 25 Opposite sides 4 4
TBGS22ET4X4/425X 125 125 69.5 4 25 One each side 4 4
TBGS21TT2.5X4/220N
Ex t
95 95 62.5 2 20 Opposite sides 4 2.5
TBGS21TT2.5X4/420X 95 95 62.5 4 20 One each side 4 2.5
TBGS21TT2.5X4/225N 95 95 62.5 2 25 Opposite sides 4 2.5
TBGS21TT2.5X4/425X 95 95 62.5 4 25 One each side 4 2.5
TBGS22TT2.5X8/220N 125 125 69.5 2 20 Opposite sides 8 2.5
TBGS22TT2.5X8/420X 125 125 69.5 4 20 One each side 8 2.5
TBGS22TT2.5X8/225N 125 125 69.5 2 25 Opposite sides 8 2.5
TBGS22TT2.5X8/425X 125 125 69.5 4 25 One each side 8 2.5
TBGS22TT4X4/220N 125 125 69.5 2 20 Opposite sides 4 4
TBGS22TT4X4/420X 125 125 69.5 4 20 One each side 4 4
TBGS22TT4X4/225N 125 125 69.5 2 25 Opposite sides 4 4
TBGS22TT4X4/425X 125 125 69.5 4 25 One each side 4 4
TBGS21IT2.5X4/220N
Ex i
95 95 62.5 2 20 Opposite sides 4 2.5
TBGS21IT2.5X4/420X 95 95 62.5 4 20 One each side 4 2.5
TBGS21IT2.5X4/225N 95 95 62.5 2 25 Opposite sides 4 2.5
TBGS21IT2.5X4/425X 95 95 62.5 4 25 One each side 4 2.5
TBGS22IT2.5X8/220N 125 125 69.5 2 20 Opposite sides 8 2.5
TBGS22IT2.5X8/420X 125 125 69.5 4 20 One each side 8 2.5
TBGS22IT2.5X8/225N 125 125 69.5 2 25 Opposite sides 8 2.5
TBGS22IT2.5X8/425X 125 125 69.5 4 25 One each side 8 2.5
NON-METALLIC TERMINAL BOXZONES 1 & 2, 21 & 22
SELECTION GUIDE
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
Non
-Met
allic
Encl
osur
es
Lig
hti
ng
46 Hazardous Areas
Range:BAY-D Series
OVERVIEWSuitable for Zones 1 & 2 applications. These light fittings can be used as a standard light during normal operations that automatically switches to emergency state (engages emergency battery) when there is a loss of power.
FEATURES• Long-life energy saving LED• Emergency duration 180 minutes• Power consumption – 2W
• MATERIALS
• Body – Die cast aluminium• Diffuser – Toughened glass• Surface finish – Epoxy powdercoated yellow• Rated voltage – AC220 –240V, 50Hz
INCLUSIONS• 1 x M20 cable gland entries• Inner control circuit with over charge protection• LED lamp• Direction sign (various options available)
CERTIFICATIONIECEx LCI 08.0021x
PROTECTIONEx d IIC T6
AMBIENT TEMPERATURE-20ºC ~ +55ºC
IP65
A-Type
E-Type
B-Type
F-Type
C-Type
G-Type
D-Type
DIRECTIONAL SIGN OPTIONS
ALUMINIUM EMERGENCY LED EXIT LIGHTZONES 1 & 2
brenclosures.com.au Hazardous Areas 47
Catalogue No.
Direction Sign External Dimensions (mm) Mounting Centres (mm)
Sign TypeHeight
(A)Width
(B)Depth
(D)Width
(E)Height
(C) Mounting Type Weight (kg)
EEALD/BA A-Type 210 507 110 200 126
Wall
6.4
EEALD/BB B-Type 210 507 110 200 126 6.4
EEALD/BC C-Type 210 507 110 200 126 6.4
EEALD/BD D-Type 210 507 110 200 126 6.4
EEALD/BE E-Type 210 507 110 200 126 6.4
EEALD/BF F-Type 210 507 110 200 126 6.4
EEALD/BG G-Type 210 507 110 200 126 6.4
EEALD/XA A-Type 255 507 110 200 50
Ceiling
6.4
EEALD/XB B-Type 255 507 110 200 50 6.4
EEALD/XC C-Type 255 507 110 200 50 6.4
EEALD/XD D-Type 255 507 110 200 50 6.4
EEALD/XE E-Type 255 507 110 200 50 6.4
EEALD/XF F-Type 255 507 110 200 50 6.4
EEALD/XG G-Type 255 507 110 200 50 6.4
EEALD/GA A-Type 715 430 110 – 440
Pendant pole
6.4
EEALD/GB B-Type 715 430 110 – 440 6.4
EEALD/GC C-Type 715 430 110 – 440 6.4
EEALD/GD D-Type 715 430 110 – 440 6.4
EEALD/GE E-Type 715 430 110 – 440 6.4
EEALD/GF F-Type 715 430 110 – 440 6.4
EEALD/GG G-Type 715 430 110 – 440 6.4
SELECTION GUIDE
Wall-mount option (/B)
B
▲ ▲
A
▲
▲
E
▲ ▲C
D
▲▲
▲
▲
Ceiling mount option (/X)
B
▲ ▲
A
▲
▲
E
▲ ▲C
▲ ▲
A
▲▲▲▲▲▲▲▲▲▲▲▲
▲▲
AC
▲
▲
▲
▲
B
▲ ▲
Pendant pole option (/G)
TECHNICAL DRAWINGS
LED
Lig
htin
g
ALUMINIUM EMERGENCY LED EXIT LIGHTZONES 1 & 2
48 Hazardous Areas
Catalogue No. Watts Voltage
Dimensions (mm)
Length Width Height Luminous fl ux (lm) Input Current (mA) Weight (kg)
LEDA120SPT/Z1 120 AC180-277 426 410 187 9800 – 11500 400 13.5
LEDA150SPT/Z1 150 AC180-277 426 410 187 12000 – 14400 510 13.5
Product Description Catalogue No.
Bracket For ceiling mounting BR-F-O
Stanchion Bracket
SBT-F-O
SBT2-F-O
SBT-F-O
Eyebolt For pendant mounting LO-F
Pipe Connector PCR-F
Guards GU-F
Range:Frog Series
OVERVIEWThe explosion-proof LED lowbay are an energy saving light designed for use in hazardous and marine locations. The robust construction is designed to operate in salt water and corrosive environments. Suitable for use within chemical, petrochemical, dust and grain applications.
FEATURES• Energy saving• Anti-glare reduces glare where end user has direct visual
contact with the light source• Shock and vibration resistant tempered glass• Optional luminous intensity and colour temps available
MATERIALS• Body – High impact resistant aluminium alloy• Lamps – 150W and 120W options• Lamp source – Osram LED• Surface finish – High corrosion epoxy powdercoated orange
INCLUSIONS• Light• Fixings• Mount supplied seperately
CERTIFICATIONIECEx CQM 13.0003X
PROTECTIONEx d e IIB T6 or T6 GbEx tb IIIC T95ºC or T80ºC Db IP66
AMBIENT TEMPERATURE-40ºC ~ +55ºC
IP66
Guards
Bracket for ceiling mounting
Stanchion bracket
Eyebolt for pendant mounting
Pipe Connector
SELECTION GUIDE
INSTALLATION ACCESSORIES
ALUMINIUM LED LOWBAY LIGHTZONE 1 & 2, 21 & 22
brenclosures.com.au Hazardous Areas 49
Candela Distribution Beam Angle
Colour Temp
Warm Natural Cool
A 40 1 2 3
B 60 1 2 3
C 80 1 2 3
D 120 1 2 3
E C0-180º:120C90-270º:60 1 2 3
F C0-180º:110C90-270º:120 1 2 3
TECHNICAL DRAWINGS
PART NUMBER ORDER CONVENTION
LEDA120SPT/Z1/ /
Standard catalogue number
Distribution type
Colour temp
Top View Side view
426mm
187m
m
Ø410mm
▲
▲
▲
▲
LIGHT DISTRIBUTION CURVE
9800 10080
390 940 530
1170 1880 1060
1950 3760 2120
2730 5640 3180
3120 7520 7520
1400 1200
2800 2520
4200 5010
7000 7560
D
B
E
C
F180 180 180
180 180
170 170 170
170 170
160 160 160
160 160
150 150 150
150 150
140 140 140
140 140
130 130 130
130 130
120 120 120
120 120
110 110 110
110 110
100 100 100
100 100
90 90 90
90 90
80 80 80
80 80
70 70 70
70 70
60 60 60
60 60
50 50 50
50 50
40 40 40
40 40
30 30 30
30 30
30 30 30
30 30
40 40 40
40 40
50 50 50
50 50
60 60 60
60 60
70 70 70
70 70
80 80 80
80 80
90 90 90
90 90
100 100 100
100 100
110 110 110
110 110
120 120 120
120 120
130 130 130
130 130
140 140 140
140 140
150 150 150
150 150
160 160 160
160 160
170 170 170
170 170
20 20 20
20 20
20 20 20
20 20
10 10 10
10 10
10 10 10
10 1049220
12480
18720
24960
37440
A 180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0
0 0 0
0 0
LED
Lig
htin
g
ALUMINIUM LED LOWBAYZONE 1 & 2, 21 & 22
50 Hazardous Areas
Catalogue No. Watts
Dimensions (mm)
Length Width Height Luminous fl ux (lm) Input Current (mA) Weight (kg)
LEDA18BAR/Z1* 18 480 180 62 1500 – 1800 300 4.7
LEDA30BAR/Z1* 30 480 180 62 2500 – 3000 600 4.7
* For more information on candela distribution please see page 51.
Bracket for ceiling mounting
Pipe Clamp
Wire GuardEyebolt for pendant mounting
Product Description Catalogue No.
Bracket For ceiling mounting BR-A-O
Pipe Clamp PCP-A
Eyebolt For pendant mounting LO-A
Guard GU-A
Range:Arowana Series
FEATURES• Energy saving• Anti-glare reduces glare where end user has direct visual
contact with the light source• Shock and vibration resistant tempered glass• Optional luminous intensity and colour temps available
MATERIALS• Body – High impact resistant aluminium alloy• Lamps – 18W and 30W options• Lamp source – Osram LED• Rated voltage 100 - 240V• Surface finish – High corrosion epoxy powdercoated orange
INCLUSIONS• Light• Long-life energy saving LED• Fixings
CERTIFICATIONIECEx CQM 12.0034X
PROTECTIONEx d IIB T6 GbEx tb IIIC T80ºC Db IP66
AMBIENT TEMPERATURE-40ºC ~ +55ºC
IP66
SELECTION GUIDE
INSTALLATION ACCESSORIES
OVERVIEWThe explosion-proof LED linear lights are an energy saving light designed for use in hazardous and marine locations. The robust construction is designed to operate in salt water and corrosive environments. Suitable for use within chemical, petrochemical, dust and grain applications.
ALUMINIUM LED LINEAR LIGHTZONES 1 & 2, 21 & 22
brenclosures.com.au Hazardous Areas 51
TECHNICAL DRAWINGS
Front View Side View
Colour Temp *
Warm White 1
Natural White 2
Cool White 3
* References catalogue numbers on page 50.
PART NUMBER ORDER CONVENTION
LEDA18BAR/Z1/
Standard catalogue number
Colour temp (eg. 1, 2 or 3)
480mm 180mm▲ ▲▲ ▲
62m
m
▲
▲
LIGHT DISTRIBUTION CURVE
610
800
1120
1280
180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0
LED
Lig
htin
g
ALUMINIUM LED LINEAR LIGHTZONES 1 & 2, 21 & 22
52 Hazardous Areas
Catalogue No. Watts
Dimensions (mm)
Length Width Height Luminous fl ux (lm) Input Current (mA) Weight (kg)
LEDA30SPT/Z1 30 311 300 190 2400 – 2900 310 5.3
LEDA60SPT/Z1 60 311 300 190 4100 – 2900 600 5.5
Product Description Catalogue No.
Brackets For ceiling mounting BR-A-O
Stanchion bracket SBT-GF-O
Eyebolt For pendant mounting LO-A
Pipe clamp PCP-A
Guard GU-GF
FEATURES• Energy saving• Anti-glare reduces glare where end user has direct visual
contact with the light source• Shock and vibration resistant tempered glass• Optional luminous intensity and colour temps available
MATERIALS• Body – High impact resistant aluminium alloy• Lamps – 30W and 60W options• Lamp source – Osram LED• Rated voltage 100 - 240V• Surface finish – High corrosion epoxy powdercoated orange
INCLUSIONS• Light• Long-life energy saving LED• Fixings• Mount supplied seperately
CERTIFICATIONIECEx CQM 12.0033 x
PROTECTIONEx d IIB T5/T6 GbEx t IIIC T95ºC/T80ºC Db IP66
AMBIENT TEMPERATURE-40ºC ~ +55ºC
Range:Goldenfrog
IP66
SELECTION GUIDE
INSTALLATION ACCESSORIES
OVERVIEWThe explosion-proof LED lowbay are an energy saving light designed for use in hazardous and marine locations. The robust construction is designed to operate in salt water and corrosive environments. Suitable for use within chemical, petrochemical, dust and grain applications.
Guards
Bracket for ceiling mounting
Eyebolt for pendant mounting
Pipe Clamp
ALUMINIUM LED LOWBAYZONES 1 & 2, 21 & 22
brenclosures.com.au Hazardous Areas 53
LIGHT DISTRIBUTION CURVES
Catalogue No. Candela Distribution
Colour Temp
Warm Natural Cool
LEDA30SPT/Z1
A 1 2 3
B 1 2 3
C 1 2 3
D 1 2 3
E 1 2 3
F 1 2 3
LEDA60SPT/Z1
A 1 2 3
B 1 2 3
C 1 2 3
D 1 2 3
E 1 2 3
F 1 2 3
PART NUMBER ORDER CONVENTION
LEDA30SPT/Z1/ /
Standard catalogue number
Distribution type
Colour temp
D
B
E
C
F
A
70
140
280
350
420
180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0
70
140
280
350
420
180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0
360
420
480
640
700
180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0
360
420
480
640
700
180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0
4000
8000
12000
16000
20000
180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0
4000
8000
12000
16000
20000
180 170 160150
140130
120110100
90
80
70
6050
403030
4050
6070
8090
100
110120
130140
150160 170
2020 1010 0LE
D L
ight
ing
TECHNICAL DRAWINGS
Top View Side View
311m
m
▲
▲
190m
m
▲
▲
ALUMINIUM LED LOWBAYZONES 1 & 2, 21 & 22
54 Hazardous Areas
Catalogue No. Watts
Dimensions (mm)
Length Width Height Mounting Weight (kg)
LED030FLD/C/Z1 30 280 220 156
Bracket
5.4
LED045FLD/C/Z1 45 290 240 160 5.55
LED060FLD/C/Z1 60 290 240 160 5.55
LED030FLD/P9/Z1 30 280 220 156
90º Pole
5.4
LED045FLD/P9/Z1 45 290 240 160 5.55
LED060FLD/P9/Z1 60 290 240 160 5.55
LED030FLD/P2/Z1 30 280 220 156
25º Pole
5.4
LED045FLD/P2/Z1 45 290 240 160 5.55
LED060FLD/P2/Z1 60 290 240 160 5.55
LED030FLD/W/Z1 30 280 220 156
Wall
5.4
LED045FLD/W/Z1 45 290 240 160 5.55
LED060FLD/W/Z1 60 290 240 160 5.55
ALUMINIUM LED LOWBAYZONES 1 & 2, 21 & 22
FEATURES• Energy saving and long service life LED lamps• Service life up to 50,000 hours• Convenient mounting and ease of maintenance• Multiple mounting options available
MATERIALS• Body – Aluminium alloy• Transparent cover – Toughened glass• Lamp source – Osram LED• Surface finish – Epoxy powdercoated grey
INCLUSIONS• Phoenix cage terminals• Voltage range of AC 100 – 240V• Lamp options – 30W, 45W and 60W
CERTIFICATIONIECEx CQM 13.0025x
PROTECTIONEx de IICDIP A21 TA
For 'T Rating' refer to IECEx certificate
AMBIENT TEMPERATURE-40ºC Ta +50ºC
Range:CZ0873/1 (30W)CZ0874/1 (45W / 60W)
IP66
SELECTION GUIDE
Catalogue No.
Product To suit 30W To suit 45W & 60W
Ceiling bracket (set) D8722/1 D8722/1
Mounting bracket (set) D8701/1 D8701/2
Pendant mounting bracket (set) D8702/1 D8702/2
¾" straight pipe (set) D732
Chain (set) D623
Lamp pole – fence (set) D8725
Lamp pole – flange (set) D8726
INSTALLATION ACCESSORIES
Bracket mount Pole 90º
Wall mountPole 25º
OVERVIEWThe explosion-proof LED lowbay are an energy saving light designed for use in hazardous and marine locations. The robust construction is designed to operate in salt water and corrosive environments. Suitable for use within chemical, petrochemical, dust and grain applications.
brenclosures.com.au Hazardous Areas 55
ALUMINIUM LED LOWBAYZONES 1 & 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
30W
Side View
Front View – mounting bracket
Side Vew – pole mount 90º Side Vew – pole mount 25º
Front View – bracket mount Front View – pendant mount
45W 60W
0
120
240
360
480
600
720
-90
-60
-30 0 30
0
200
400
600
800
1000
1200
-90
-60
-30 0 30
0
200
400
600
800
1000
1200
-90
-60
-30 0 30
▲
▲
A
▲ ▲B
LED
Lig
htin
g
56 Hazardous Areas
ALUMINIUM LED WELL GLASSZONES 1 & 2, 21 & 22
Catalogue No. Watts
Dimensions (mm)
Height Width Mounting Weight (kg)
LEDA020FLD/C/Z1 20W 208 241
Ceiling
4.05
LEDA030FLD/C/Z1 30W 208 241 4.05
LEDA050FLD/C/Z1 50W 350 255 7.40
LEDA070FLD/C/Z1 70W 350 255 7.40
LEDA100FLD/C/Z1 100W 385 295 8.40
LEDA120FLD/C/Z1 120W 385 295 8.40
LEDA020FLD/H/Z1 20W 208 241
Hook
3.64
LEDA030FLD/H/Z1 30W 208 241 3.64
LEDA050FLD/H/Z1 50W 350 255 6.50
LEDA070FLD/H/Z1 70W 350 255 6.50
LEDA100FLD/H/Z1 100W 385 295 7.50
LEDA120FLD/H/Z1 120W 385 295 7.50
LEDA020FLD/P/Z1 20W 208 241
Pendant pole
4.45
LEDA030FLD/P/Z1 30W 208 241 4.45
LEDA050FLD/P/Z1 50W 350 255 7.80
LEDA070FLD/P/Z1 70W 350 255 7.80
LEDA100FLD/P/Z1 100W 385 295 8.80
LEDA120FLD/P/Z1 120W 385 295 8.80
LEDA020FLD/W/Z1 20W 208 241
Wall
4.42
LEDA030FLD/W/Z1 30W 208 241 4.42
LEDA050FLD/W/Z1 50W 350 255 9.20
LEDA070FLD/W/Z1 70W 350 255 9.20
LEDA100FLD/W/Z1 100W 385 295 10.20
LEDA120FLD/W/Z1 120W 385 295 10.20
LEDA020FLD/S/Z1 20W 208 241
Pole
3.25
LEDA030FLD/S/Z1 30W 208 241 3.25
LEDA050FLD/S/Z1 50W 350 255 7.70
LEDA070FLD/S/Z1 70W 350 255 7.70
LEDA100FLD/S/Z1 100W 385 295 8.70
LEDA120FLD/S/Z1 120W 385 295 8.70
FEATURES• Energy saving and long service life LED lamps• Isolated LED lamp compartment• Wind convection heat dissipation structure• Three enclosure sizes
MATERIALS• Body – Copper-free aluminium alloy• Transparent cover – Toughened glass• Lamp source – Long-life LED• Rated voltage – AC 187–265V, 50/60Hz• Surface finish – Epoxy powdercoated yellow
INCLUSIONS• Lamp options – 20W, 30W, 50W, 70W, 100W and 120W• Multiple mounting options
CERTIFICATIONIECEx CQM 12.0009x
PROTECTIONEx d IIC T6 (-40ºC≤Ta≤+40ºC) / T5 (-40ºC≤Ta≤+55ºC) GbEx t IIIC T80ºC (-40ºC≤Ta≤+40ºC) /T95ºC (-40ºC≤Ta≤+55ºC) Db IP66
AMBIENT TEMPERATURE-40ºC ~ +55ºC T5-40ºC ~ +40ºC T6 Range:
BAD85 Series
IP66/67
SELECTION GUIDE
OVERVIEWThe explosion-proof LED well glass lights are an energy saving light designed for use in hazardous and marine locations. The robust construction is designed to operate in salt water and corrosive environments. Suitable for use within chemical, petrochemical, dust and grain applications.
brenclosures.com.au Hazardous Areas 57
ALUMINIUM LED WELL GLASSZONES 1 & 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
20W & 30W 50W & 70W 100W & 120W
Front View – 20W &30W Front View – 50W &70W Front View – 100W &120W
▲
▲ ▲
▲ ▲ ▲
208m
m
350m
m
385m
m
▲ ▲ ▲▲ ▲ ▲210mm 255m 295mm
0 0 0
160 60 40
320 12080
480 180120
640 240160
800 300200
0º 0º 0º30º 30º 30º
60º60º 60º
90º 90º 90º
LED
Lig
htin
g
58 Hazardous Areas
OVERVIEWThe 400W flameproof well glass light fittings are manufactured from aluminium with a toughened glass diffuser. They are suitable for use in chemical and petrochemical applications.
FEATURES• Integral control gear• Stainless steel fixings• Multiple mounting methods
MATERIALS• Body – Aluminium alloy• Diffuser – Toughened glass• Lamp sources
High Pressure Sodium, Metal Halide or Mercury Vapour• Lamp holder – E40• Rated voltage – AC 240V, 50Hz • Ballast – Conventional• Wire guard – Zinc coated• Surface finish – Epoxy powdercoated yellow or grey
INCLUSIONS• Stainless steel fixings• Integral control gear• Wire guard• Optional external dome or angle reflector available
CERTIFICATIONIECEx CQM 12.0028
PROTECTIONEx d IIC T3
AMBIENT TEMPERATURE-20ºC ~ +55ºC
ALUMINIUM WELL GLASS LIGHT 400WZONES 1 & 2
Catalogue No.
Dimensions (mm)
Length Height Total Height Lamp Source Mounting Weight (kg)
WGA400MH/H 308 648 798
Metal Halide (MH)
Hook 20.85
WGA400MH/P 308 648 1088 Pendant 23.65
WGA400MH/B 308 648 635 Wall 23.25
WGA400MH/C 308 643 643 Ceiling 21.50
WGA400MH/S 480 595 3000 Stanchion / Pole 21.80
WGA400MV/H 308 648 798
Mercury Vapour (MV)
Hook 20.85
WGA400MV/P 308 648 1088 Pendant 23.65
WGA400MV/B 308 648 635 Wall 23.25
WGA400MV/C 308 643 643 Ceiling 21.50
WGA400MV/S 480 595 3000 Stanchion / Pole 21.80
WGA400HS/H 308 648 798
High Pressure Sodium (HS)
Hook 20.85
WGA400HS/P 308 648 1088 Pendant 23.65
WGA400HS/B 308 648 635 Wall 23.25
WGA400HS/C 308 643 643 Ceiling 21.50
WGA400HS/S 480 595 3000 Stanchion / Pole 21.80
IP66
Product Description Catalogue No.
External ReflectorsAngle RA400
Dome RD400
SELECTION GUIDE
External Refl ector – angled
External Refl ector – dome
INSTALLATION ACCESSORIES
brenclosures.com.au Hazardous Areas 59
ALUMINIUM WELL GLASS LIGHT 400WZONES 1 & 2
Mounting Options
Front View Front View with Dome Reflector
Front View with Angled Reflector
308▲ ▲
648
130
152
▲
▲ ▲
▲▲
▲
Ø 469▲ ▲
185
▲
▲
▲
▲
70
▲
▲
Ø 466
P: Pendant Mount
440
▲
▲
648
▲
▲
308▲ ▲
H: Hook Mount
648
150
▲
▲
▲
▲
308▲ ▲
B: Wall Mount
615▲ ▲
635
▲
▲
30º
C: Ceiling Mount
308▲ ▲
▲
▲
643
S: Pole Mount
▲▲
▲
▲ 3000
595
▲
▲
▲
480
▲Ø 50
TECHNICAL DRAWINGS
TECHNICAL DRAWINGS
60140220300380460520
120
90
60
180 150
30
60140220300380460520
90
60
180 150 120
30
60140220300380460520600680
90
60
180 150 120
30
Luminous intensity distribution = cd/1000lmBased on 400W metal halide lampfor High Pressure Sodium multiply x 1.37for Mercury lamp multiply x 0.6
Wel
l Gla
ssLi
ghtin
g
60 Hazardous Areas
Catalogue No.
Dimensions (mm)
WattsWidth
(A)Depth
(B)Height
(C)Total Height
(D) Lamp Source Weight (kg)
WGA175MH/T 175 286 276 465 587
Metal Halide
14.45
WGA250MH/T 250 286 276 465 587 14.45
WGA400MH/T 400 324 317 532 660 20.0
WGA175MV/T 175 286 276 465 587
Mercury Vapour
14.45
WGA250MV/T 250 286 276 465 587 14.45
WGA400MV/T 400 324 317 532 660 20.0
WGA150HS/T 150 286 276 465 587
High Pressure Sodium
14.45
WGA250HS/T 250 286 276 465 587 14.45
WGA400HS/T 400 324 317 532 660 20.0
ALUMINIUM WELL GLASS LIGHTZONES 1 & 2
OVERVIEWThe aluminium flameproof well glass light fittings are manufactured from aluminium with a toughened glassdiffuser. They are suitable for use in chemical and petrochemical applications.
FEATURES• Integral control gear• Stainless steel fixings• Multiple mounting method• Ex d e configuration for ease of termination
MATERIALS• Body – Aluminium alloy• Diffuser – Toughened glass• Lamp sources High Pressure Sodium, Metal Halide or Mercury Vapour• Lamp holder – E40• Rated voltage – AC 240V, 50Hz • Wire guard – Zinc coated• Surface finish – Epoxy powdercoated yellow or grey
INCLUSIONS• Stainless steel fixings• Integral control gear• Optional external dome or angle reflector available
CERTIFICATIONECEx CQM 12.0029 (150W – 250W)IECEx CQM 12.0031x (400W only)
PROTECTIONEx d e IIC T3 (150W – 250W)Ex d e IIC T3 Gb (400W only
AMBIENT TEMPERATURE-20ºC ~ +55ºC (150W – 250W)-20ºCTa+55ºC (400W only IP
65
SELECTION GUIDE
Product Description Catalogue No.
External Reflectors – angled
To suit 400W light RA400/T
To suit 250W light RA250/T
To suit 175W light RA175/T
External reflectors – dome
To suit 400W light RD400/T
To suit 250W light RD250/T
To suit 175W light RD175/T
External Refl ector – angled
External Refl ector – dome
INSTALLATION ACCESSORIES
brenclosures.com.au Hazardous Areas 61
ALUMINIUM WELL GLASS LIGHTZONES 1 & 2
▲
▲
▲ ▲
D C
▲ ▲
A
Front View
▲ ▲
B
Side View
▲▲ ▲▲ ▲
▲▲
▲
E
20
Front ViewDome Reflector
Mounting BracketSide ViewAngled Reflector
▲
▲
15º
▲
▲13
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVES
WGA 250 Series (includes 150W, 175W and 250W)
180º
0
40
80
120
160
2000º 30º
50º
90º
150º 180º
0
80
160
240
360
4000º 30º
50º
150º 180º
0
60
120
180
2400º 30º
45º
90º
135º
WGA 400W
180º
0
20
40
60
80
1000º 30º
60º
90º
150º 180º
0
40
80
120
160
0º 30º
50º 50º
90º 90º
150º 180º
0
40
80
120
160
0º 30º
135º
Wel
l Gla
ssLi
ghtin
g
62 Hazardous Areas
Catalogue No.
Dimensions (mm) Entries^
WattsWidth
(A)Height
(B)Depth
(C) Lamp Source Mounting Number Type Weight (kg)
FLDA175MH/M 175 330 650 195
Metal Hallide(MH)
Portable 1 x M25 Clearance 13.0
FLDA250MH/M 250 330 650 195 Portable 2 x M20 Clearance 13.0
FLDA175MH/T 175 314 621 195 Fixed 1 x M25 Clearance 13.0
FLDA250MH/T 250 314 621 195 Fixed 2 x M20 Clearance 13.0
FLDA400MH/T 400 454 500 335 Fixed 2 x M25 Threaded 28.0
FLDA150HS/M 150 490 195 650
High Pressure Sodium(HS)
Portable 1 x M25 Clearance 13.0
FLDA250HS/M 250 330 195 600 Portable 1 x M25 Clearance 13.0
FLDA150HS/T 150 314 195 621 Fixed 1 x M25 Clearance 13.0
FLDA250HS/T 250 314 195 571 Fixed 1 x M25 Clearance 13.0
FLDA400HS/T 400 454 335 500 Fixed 2 x M25 Threaded 28.0
Please Note: 175W option not available with High Pressure Sodium lamp source^ All entries are 2 entries, 1 plugged
ALUMINIUM 150W-400W FLOODLIGHTZONES 1 & 2
OVERVIEWSuitable for use in Zone 1 & 2 applications, the robust construction allows the fixture to be utilised in the most arduous of environments.
Available in fixed or portable mounting.
FEATURES• Seperate Ex e rated termination compartment• Portable option available with plug and cable fitted on
request up to 20 metres• 150–250W available in either portable or fixed mounting• 400W available in fixed mounting only
MATERIALS• Body – Aluminium alloy• Diffuser – Toughened glass• Lamp sources High Pressure Sodium, Metal Halide or Mercury Vapour• Lamp holder – E40• Rated voltage – AC 240V, 50Hz • Wire guard – Zinc coated• Surface finish – Epoxy powdercoated yellow or grey
INCLUSIONS• Stainless steel fixings• Lamp holder• 150-250W – 2 x M25, 1 plugged clearance hole• 400W – 2 x M20, 1 plugged• 150–250W available in portable or fixed mounting• 400W available in fixed mounting only• Ex e termination box for ease of cabling
CERTIFICATIONECEx CQM 12.0025 (150W – 250W)IECEx CQM 12.0030 (400W only))
PROTECTIONEx de IIB T3 Gb (150W – 250W)Ex de IIB T3 (400W only)
SELECTION GUIDE
IP65
brenclosures.com.au Hazardous Areas 63
ALUMINIUM 150W-400W FLOODLIGHTZONES 1 & 2
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
A: 250 Series – Portable mounting option
▲
▲
B
▲ ▲
490
▲ ▲C
Side ViewFront View
▲ ▲
A
B: 250 Series – Fixed mounting option
▲
▲
B
▲ ▲C
Side View Fixing PointsFront View
▲ ▲A
▲▲40
▲
▲
▲
▲180
310
▲
3 x Ø12
C: 400 Series – Fixed mounting only
Front View Side View Fixing Points
▲
▲
B
▲ ▲
A
▲▲ C
▲▲
Ø165 ▲
4 x Ø13
▲▲40
300
450
150
Floo
dlig
htin
g
64 Hazardous Areas
Catalogue No. Dimensions (mm)
Metal Hallide High Pressure Sodium High Pressure Mercury Watts Width Height Mounting Type
WGA175/MH/C/Z2 WGA150/HS/C/Z2 – 175W 235 365
CeilingWGA250/MH/C/Z2 WGA250/HS/C/Z2 WGA250/MV/C/Z2 250W 300 435
WGA400/MH/C/Z2 WGA400/HS/C/Z2 WGA400/MV/C/Z2 400W 300 485
WGA175/MH/W/Z2 WGA150/HS/W/Z2 – 150W 345 325
WallWGA250/MH/W/Z2 WGA250/HS/W/Z2 WGA250/MV/W/Z2 250W 470 425
WGA400/MH/W/Z2 WGA400/HS/W/Z2 WGA400/MV/W/Z2 400W 490 465
WGA175/MH/P25/Z2 WGA150/HS/P25/Z2 – 150W 235 365
Pole 25ºWGA250/MH/P25/Z2 WGA250/HS/P25/Z2 WGA250/MV/P25/Z2 250W 300 435
WGA400/MH/P25/Z2 WGA400/HS/P25/Z2 WGA400/MV/P25/Z2 400W 300 485
WGA175/MH/P/Z2 WGA150/HS/P/Z2 – 150W 260 340
Pendant PoleWGA250/MH/P/Z2 WGA250/HS/P/Z2 WGA250/MV/P/Z2 250W 345 410
WGA400/MH/P/Z2 WGA400/HS/P/Z2 WGA400/MV/P/Z2 400W 345 460
ALUMINIUM WELL GLASS FLOODLIGHTZONE 2, 21 & 22
Range:BnD81 Series
OVERVIEWSuitable for use in zone 2 applications and available in two enclosure sizes with various lamp types to suit the application. The explosion proof well glass floodlight has an aluminium body and toughened glass cover to withstand the most challenging conditions.
FEATURES• Integral control gear for easy installation and maintenance• Dome reflector available
SELECTION GUIDE
MATERIALS• Body – Copper-free aluminium alloy• Transparent cover – Toughened glass, stands 4J impact• Fixings – 316 stainless steel• Lamp holder – E27• Surface finish – Powdercoated yellow
INCLUSIONS• 1 x M25 x 1.5mm cable entries• Fixings
CERTIFICATIONIECEx CQM 12.0010x (175W & 250W)IECEx CQM 12.0039x (400W)
PROTECTIONEx nR IIC T3 GcEx t IIIC T190ºC Db IP65
AMBIENT TEMPERATURE-60ºC ~ +55ºC
IP66
brenclosures.com.au Hazardous Areas 65
ALUMINIUM WELL GLASS FLOODLIGHTZONE 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
150W 250W 400W
0
00
1818 16
3636
32
54 54
48
72 72
64
900º
0º 0º30º
30º 30º
60º
60º60º
90º
90º90º
Floo
dlig
htin
g
Hei
ght
▲
▲
Front View – ceiling mount
Width
▲ ▲
Front View – wall mount Front View – pendant pole Front View – 25º pole
Hei
ght
▲
▲
Width
▲ ▲
Hei
ght
Hei
ght
▲ ▲
▲
▲
Width
▲ ▲
66 Hazardous Areas
Catalogue No.
Dimensions (mm)
Watts Lamp Source Height Width Depth Weight (kg)
FLDA150HS/Z2 150
High Pressure Sodium
418 572 165 12.85
FLDA250HS/Z2 250 418 572 165 12.85
FLDA400HS/Z2 400 418 572 165 12.85
FLDA150MH/Z2 150
Metal Hallide
418 572 165 12.85
FLDA250MH/Z2 250 418 572 165 12.85
FLDA400MH/Z2 400 418 572 165 12.85
ALUMINIUM FLOODLIGHTZONE 1 & 2, 21 & 22
Range:BnT81 Series
FEATURES• Rapid starting and stable performance• All exposed fasteners are stainless steel
SELECTION GUIDE
MATERIALS• Body – Copper-free aluminium alloy• Cover – Toughened glass, stands 4J impact• Internal reflector – High purity aluminium• Fixings – 316 stainless steel• Lamp – 400W• Lamp holder – E40• Surface finish – Powdercoated white
INCLUSIONS• Fixings
CERTIFICATIONIECEx CQM 12.0011x
PROTECTIONEx nR IIC T3 GcEx nR IIC T252º GcEx t IIC T190ºC Db IP65Ex t IIIC T252ºC Db IP65
AMBIENT TEMPERATURE-60ºC ~ +55ºC
IP66
TECHNICAL DRAWINGS
OVERVIEWSuitable for use in zone 2 applications and available in two enclosure sizes with various lamp types to suit the application. The explosion proof floodlight has an aluminium body and toughened glass cover to withstand the most challenging conditions..
Front View Side View
572mm▲ ▲ 165mm▲ ▲
418m
m
▲
▲
brenclosures.com.au Hazardous Areas 67
Catalogue No.
Dimensions (mm)
Watts Width Height Lamp Source Mounting Type
WGV035TH/A 35 126 204Halogen Tungsten
Arm
WGV035TH/B 35 126 204 Ceiling
ALUMINIUM TANK INSPECTION VESSEL LIGHTZONES 1 & 2
IP65
OVERVIEWThe flameproof tank inspection vessel light fittings are manufactured from aluminim alloy with a toughened glass diffuser and are suitable for use in chemical and petrochemical applications.
FEATURES• Specially designed reflector
MATERIALS• Body – Aluminium alloy• Diffuser – Toughened glass• Lamp sources – Halogen Tungsten• Lamp wattage – 35W• Rated voltage – 240V, 50Hz• Surface finish – Epoxy powdercoated yellow
INCLUSIONS• Mounting arm or ceiling bracket• 1 x M20, cable gland entries
CERTIFICATIONIECEx LCI 08.0007
PROTECTIONEx d IIB T3 IP65
AMBIENT TEMPERATURE-20ºC ~ +55ºC
SELECTION GUIDE
Range:BAK51 Series
TECHNICAL DRAWINGS
Side View Mounting Option (/A) Front View Mounting Option (/B)
204m
m
205.
5mm
▲ ▲
▲ ▲
126mm166.5mm▲
▲
▲▲
Floo
dlig
htin
g
68 Hazardous Areas
Catalogue No.
Dimensions (mm)
Lamp Length Width Height Weight (kg)
FLDS300TH/T/Z2 300W 337 137 360 5.3
300W HALOGEN FLOODLIGHTZONE 2
Range:PF-HnR Series
IP66/67
OVERVIEWThe 300W halogen floodlight is manufactured from 316 stainless steel with heat and impact resistant glass front. The powdercoated stainless steel construction and IP66/67 protection rating allows it to be used in the most arduous environments.
FEATURES• 316 stainless steel construction• Stainless steel trunnion mounting arm• Vertical adjustment (up 75º, down 45º)
SELECTION GUIDE
MATERIALS• Body – 316 stainless steel, deep drawn• Glass front – Heat and impact resistant• Gasket – Silicone rubber• Internal reflector – High reflectance aluminium• Fixings – 316 stainless steel• Lamp holder – R7S• Rated voltage – 240V, 50Hz• Surface finish – Epoxy powdercoated white
INCLUSIONS• 300W Halogen lamp• 1 x M20 cable gland entry• Stainless steel trunnion mounting arm• Rubber mount pad for high vibration areas
CERTIFICATIONIECEx KGS 07.0005x
PROTECTIONEx n R II T2 IP67
AMBIENT TEMPERATURE-20ºC ~ +55ºC
Range:PF-HnR
brenclosures.com.au Hazardous Areas 69
300W HALOGEN FLOODLIGHTZONE 2
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
Front View Side View Fixing Dimensions
95
2 x ø14 holes
360m
m
337mm
360m
m
▲
▲
▲ ▲ 137mm
M20 cable gland entry
▲ ▲
90º
120º
60º
30º
90º
120º
60º
30º
180
270
360
0º
90
90
Floo
dlig
htin
g
70 Hazardous Areas
Catalogue No.
Dimensions (mm)
Watts Width Height Mounting Lamp Colour Weight (kg)
LEDA2AVCL/C/Z1/R 2W 195 205
Ceiling
Red 3.0
LEDA2AVCL/C/Z1/B 2W 195 205 Blue 3.0
LEDA2AVCL/C/Z1/Y 2W 195 205 Yellow 3.0
LEDA2AVCL/C/Z1/G 2W 195 205 Green 3.0
LEDA2AVCL/H/Z1/R 2W 195 205
Horizontal
Red 4.45
LEDA2AVCL/H/Z1/B 2W 195 205 Blue 4.45
LEDA2AVCL/H/Z1/Y 2W 195 205 Yellow 4.45
LEDA2AVCL/H/Z1/G 2W 195 205 Green 4.45
ALUMINIUM AUDIO & VISUAL CAUTION LIGHTZONES 1 & 2
FEATURES• Energy saving• Ultra bright LED lamp• Low power consumption and long service life up to
30,000 hours• Pendant and horizontal mounting options
MATERIALS• Body – Copper-free aluminium alloy• Transparent cover – Toughened glass, impact resistant• Lamps – 2W LED• Rated voltage – AC 220-240V, 50/60Hz• Surface finish – Epoxy powdercoated yellow / grey
INCLUSIONS• Lamp colour – Red, blue, yellow and green• Mounting accessories• Flash frequency – 150 times per minute• Sound intensity – 100-200dB• Pendant type supplied with explosion-proof junction box• Horizontal type – 1 x M25 entries• Pendant type – 2 x M25 entries
CERTIFICATIONIECEx CQM 11.0023
PROTECTIONEx d ib IIC T6 Gb
AMBIENT TEMPERATURE-20ºC ~ +55ºC
OVERVIEWThe explosion proof caution lights are an energy saving light designed for use in chemical, petrochemical, grain, dust and other hazardous area applications.
Range:BBJ Series
IP65
SELECTION GUIDE
TECHNICAL DRAWINGS
▲
▲
205m
m
▲ ▲195mm
brenclosures.com.au Hazardous Areas 71
TECHNICAL DRAWINGS
ALUMINIUM VISUAL CAUTION LIGHTZONES 1 & 2, 21 & 22
FEATURES• Energy saving• Ultra bright LED lamp• Low power consumption and long service life• Pendant and horizontal mounting options
MATERIALS• Body – Copper-free aluminium alloy• Transparent cover – Toughened glass, impact resistant• Lamps – 3W LED• Lamp colour – Red, blue, yellow and green• Rated voltage – AC 220-240V, 50/60Hz• Surface finish – Epoxy powdercoated yellow / grey
INCLUSIONS• Lamp colour – Red, blue, yellow and green• Mounting accessories• Flash frequency – 150 times per minute• Pendant type supplied with explosion-proof junction box• Horizontal type – 1 x M25 entries• Pendant type – 2 x M25 entries
CERTIFICATIONIECEx CQM 12.0038x
PROTECTIONEx d IIC T6 GbEx t IIIC T80ºC Db IP66
AMBIENT TEMPERATURE-40ºC ~ +55ºC
OVERVIEWThe explosion proof caution lights are an energy saving light designed for use in chemical, petrochemical, grain, dust and other hazardous area applications.
Range:BJD81 Series
IP66/67
Catalogue No.
Dimensions (mm)
Width Height Mounting Lamp Colour Weight (kg)
LEDA03VCL/C/Z1/R 146 230
Ceiling
Red 2.5
LEDA03VCL/C/Z1/B 146 230 Blue 2.5
LEDA03VCL/C/Z1/Y 146 230 Yellow 2.5
LEDA03VCL/C/Z1/G 146 230 Green 2.5
LEDA03VCL/H/Z1/R 146 230
Horizontal
Red 4.4
LEDA03VCL/H/Z1/B 146 230 Blue 4.4
LEDA03VCL/H/Z1/Y 146 230 Yellow 4.4
LEDA03VCL/H/Z1/G 146 230 Green 4.4
SELECTION GUIDE
▲
▲
230m
m
▲ ▲146mm
Cau
tion
Ligh
ting
72 Hazardous Areas
ALUMINIUM LOCAL VISUAL CAUTION LIGHTZONES 1 & 2, 21 & 22
Catalogue No.
Dimensions (mm)
Watts Width Height Mounting Weight (kg)
LEDA10VCL/C/Z1 10W 250 370 Ceiling 10.0
FEATURES• Energy saving• Ultra bright LED lamp• Low power consumption and long service life up to
55,000 hours• Integrated control chip with various circuit protection• Synchronis function of light fitting via signal lines
MATERIALS• Body – Copper-free aluminium alloy• Transparent cover – Toughened glass, impact resistant• Lamps – ≤10W LED• Rated voltage – AC 220-240V, 50/60Hz• Surface finish – Epoxy powdercoated yellow / grey
INCLUSIONS• Lamp colour – Red• Luminous intensity >200cd• Flash frequency – 1 second• 4 x M25 cable entries (3 plugged)
CERTIFICATIONIECEx CQM 11.0026x
PROTECTIONEx de IIC T6 GbEx tb IIIC T80ºC Db IP66
AMBIENT TEMPERATURE-20ºC ~ +55ºC
OVERVIEWThe explosion proof caution lights are an energy saving light designed for use in chemical, petrochemical, grain, dust and other hazardous area applications.
SELECTION GUIDE
Range:BSZD81 Series
IP65
TECHNICAL DRAWINGS
L
Lamp 1
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6
Lamp 2 Lamp 3
NPEPower Supply220-240V AC 50/60Hz▲
▲
370m
m
▲ ▲250mm
brenclosures.com.au Hazardous Areas 73
TECHNICAL DRAWINGS
Catalogue No.
Dimensions (mm)
Watts Width Height Mounting Weight (kg)
LEDA40VCL/C/Z1 40 308 420 Ceiling 13.8
FEATURES• Energy saving• Ultra bright LED lamp• Low power consumption and long service life up to
30,000 hours• Integrated control chip with various circuit protection• Synchronis function of light fittings via signal lines
MATERIALS• Body – Copper-free aluminium alloy• Transparent cover – Toughened glass, impact resistant• Lamps – 40W LED• Rated voltage – AC 220-240V, 50/60Hz• Surface finish – Epoxy powdercoated yellow / grey
INCLUSIONS• Lamp colour – Red• Luminous intensity >2000cd• Flash frequency 20-60 times per minute• 4 x M25 entries (3 plugged)
CERTIFICATIONIECEx CQM 11.0026x
PROTECTIONEx de IIC T6 GbEx tb IIIC T80ºC Db IP66
AMBIENT TEMPERATURE-40ºC ~ +55ºC
OVERVIEWThe explosion proof caution lights are an energy saving light designed for use in chemical, petrochemical, grain, dust and other hazardous area applications.
SELECTION GUIDE
Range:BSZD81-C Series
IP65
L
Lamp 1
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6
Lamp 2 Lamp 3
NPEPower Supply220-240V AC 50/60Hz▲
▲
420m
m
▲ ▲308mm
Cau
tion
Ligh
ting
ALUMINIUM LOCAL VISUAL CAUTION LIGHTZONES 1 & 2, 21 & 22
74 Hazardous Areas
Catalogue No.
Dimensions (mm)
Watts No. of Lamps Length Width Height Diameter Weight (kg)
FLUA21X1/C 21W 1 270 245 160 160 5.6
FLUA21X2/C 21W 2 270 245 160 160 5.6
IP65
ALUMINIUM ANNULAR COMPACT FLUORESCENTZONES 1 & 2
OVERVIEWThe flameproof annular fluorescent light fittings are manufactured from aluminium alloy and are suitable for use in chemical and petrochemical applications.
FEATURES• Toughened glass cover, anti-impact and high light
transmission• PL compact lamps
MATERIALS• Body – Aluminium alloy• Wire guard – Zinc coated white• Diffuser – High impact glass• Reflector – Pure aluminium• Ballast – Conventional• Lamp holder – GR-10q• Rated voltage – AC240V, 50Hz• Surface finish – Powdercoated yellow or grey
INCLUSIONS• Light fitting• 2 x M20 cable gland entries (1 plugged)• Zinc coated wire guard• Lamps – single or twin 21W supplied
CERTIFICATIONIECEx CQM 12.0027
PROTECTIONEx d IIB T5
AMBIENT TEMPERATURE-20ºC Tamb +55ºC
SELECTION GUIDE
brenclosures.com.au Hazardous Areas 75
ALUMINIUM ANNULAR COMPACT FLUORESCENTZONES 1 & 2
TECHNICAL DRAWINGS
Top View
245mm
▲ ▲
Front View
21W x 2
270mm
▲ ▲
160m
m
▲
▲
▲
▲
D
4xø10
LIGHT DISTRIBUTION CURVE
0 0
0º 0º30º 30º
60º 60º
90º 90º
40 28
8056
120
84
160
112
140
21W x 1 21W x 2
Flur
oesc
ent
Ligh
ting
76 Hazardous Areas
Catalogue No.
Dimensions (mm)
Watts No. of LampsLength
(A)Width
(B)Height
(C)Fixings
(D) Weight (kg)
FLUA018X1/C 18W 1 780 181 186 565 7.78
FLUA018X2/C 18W 2 780 181 186 565 7.78
FLUA036X1/C 36W 1 1395 181 186 1180 10.60
FLUA036X2/C 36W 2 1395 181 186 1180 10.60
ALUMINIUM FLUORESCENTZONES 1 & 2
OVERVIEWThe flameproof fluorescent light fittings are manufactured from aluminium and are suitable for use in Zone 1 & 2 applications. The aluminium body allows the fixture to be used in the most arduous of environments.
FEATURES• Electronic ballast• Removable chassis for easy lamp replacement• Anti-vibration rubber mounts• Immersible to 1 metre• Emergency option available on request
MATERIALS• Body – Die cast aluminium• Ballast – Electronic• Lamp holder – T8 Bi Pin• Rated voltage – 240V, 50Hz• Surface finish – Epoxy powdercoated yellow or grey
INCLUSIONS• Lamps – Single or twin 18W or 36W lamps• 2 x M20 entries• Anti-vibration rubber mounts
CERTIFICATIONIECEx KGS 07.0002x (20W)IECEx KGS 07.0003x (40W))
PROTECTIONEx d IIC T6 or T5 IP67
AMBIENT TEMPERATURE-20ºC ~ +50ºC
IP66/67
SELECTION GUIDE
Range:FX Series
brenclosures.com.au Hazardous Areas 77
ALUMINIUM FLUORESCENTZONES 1 & 2
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
Front View Top View
A
▲ ▲
B
▲
C
▲
▲
D
90º
120º
60º
30º
90º
120º
60º
30º
80
120
160
0º
40
40
▲▲▲
Flur
oesc
ent
Ligh
ting
78 Hazardous Areas
Catalogue No.
Dimensions (mm)
Watts No. of LampsLength
(A)Width
(B)Height
(C) Weight (kg)
FLUS018X2/C 18W 2 706 220 135 4.95
FLUS036X2/C 36W 2 1312 220 135 8.23
STAINLESS STEEL FLUORESCENTZONES 1 & 2
OVERVIEWSuitable for Zone 1 & 2 applications. The stainless steel body allows the fixture to be utilised in the most arduous environments including metalliferous mining, chemical, petrochemical and industrial construction sites.
FEATURES• 316 stainless steel body and fixings• Centre allen key locking arrangement• 2 x M20 entries• Emergency option available on request
MATERIALS• Body – 316 stainless steel• Diffuser – Polycarbonate• Latch & fixings – 316 stainless steel• Lamps – 2 x 18W or 36W• Lamp holder – T8 Bi Pin• Body surface finish – Epoxy powdercoated white
INCLUSIONS• Lamps• Stainless steel retaining clips and mounting feet
CERTIFICATIONIECEx KGS 08.0001x (18W)IECEx KGS 08.0002x (36W))
PROTECTIONEx d emb IIC T4 GbEx d – interlock switch
AMBIENT TEMPERATURE-25ºC ~ +50ºC
SELECTION GUIDE
Range:FL-220EDG (18W)FL-240EDG (36W
IP66/67
brenclosures.com.au Hazardous Areas 79
STAINLESS STEEL FLUORESCENTZONES 1 & 2
A
▲ ▲
C
▲
▲
B
▲
▲
500mm
▲ ▲ 4 x ø10 holes
188m
m
▲
▲
Front View Top View
90º
120º
60º
30º
90º
120º
60º
30º
70
105
140
0º
35
35
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
Flur
oesc
ent
Ligh
ting
80 Hazardous Areas
Product Catalogue No.
Dimensions (mm)
Watts No. of LampsLength
(A)Width
(B)Height
(C) Mounting Weight (kg)
Standard
FLUG018X1/CA1 18W 1 808 222 134 Ceiling 6.7
FLUG018X2/CA1 18W 2 808 222 134 Ceiling 6.9
FLUG036X1/CA1 36W 1 1380 222 134 Ceiling 11.3
FLUG036X2/CA1 36W 2 1380 222 134 Ceiling 11.4
EmergencyFLUG018X2/CA1E 18W 2 808 222 134 Ceiling 8.7
FLUG036X2/CA1E 36W 2 1380 222 134 Ceiling 13.1
NON-METALLIC FLUORESCENT EMERGENCY & NON-EMERGENCYZONES 1 & 2, 21 & 22
OVERVIEWThe non-metallic fluorescent lights consist of an SMC body with a polycarbonate diffuser. The light fitting is available in both non-emergency and emergency options. The emergency light fitting automatically recharges during normal operations and lamps turn on when there is a power loss
FEATURES• EOL (end of life) on ballast• Key operated central mechanical interlocking device• Ex d switch for automatic power off when cover is unlocked• Fault, charge and discharge signal for emergency models• Internal catches clamp on both sides of diffuser• Installation accessories available
MATERIALS• Body – SMC• Diffuser – Polycarbonate• Terminals – 3 x 1.5 – 4mm• Brass gland plate• Lamps – single or twin 18W or 36W lamp• Lamp holder – T8 Bi Pin• Rated voltage – 250V, 50Hz
INCLUSIONS• Lamps T8 18W or 36W• 2 x M25 entries each end (2 plugged)• Ceiling mount brackets as standard• EOL on ballast
CERTIFICATIONIECEx CQM 12.0026 (standard)IECEx CQM 12.0041 (emergency)
PROTECTIONEx deq IIC T4 GbEx tD A21 IP66 T80ºC
AMBIENT TEMPERATURE-20ºC ≤ Ta ≤ +55ºC
SELECTION GUIDE
IP66
brenclosures.com.au Hazardous Areas 81
NON-METALLIC FLUORESCENT EMERGENCY & NON-EMERGENCYZONES 1 & 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
Front View Top View Side View
A
▲ ▲
C
▲
▲90
▲
▲ B
▲
▲
450mm
▲ ▲
0 0
0º 0º30º 30º
60º 60º
90º 90º
40 40
80 80
120 120
160 160
200 200
18W x 2 36W x 2Fl
uroe
scen
tLi
ghtin
g
82 Hazardous Areas
Catalogue No.
Dimensions (mm)
Type Watts No. of LampsLength
(A)Width
(B)Height
(C)Fixings
(D) Mounting Weight (kg) Lamp Holder
FLUG014X2/C
Non-emergency
14W 2 725 222 145 400 Ceiling 5.0 T5
FLUG018X2/C 18W 2 725 222 145 400 Ceiling 5.0 T8
FLUG028X2/C 28W 2 1335 222 145 800 Ceiling 7.9 T5
FLUG036X2/C 36W 2 1335 222 145 800 Ceiling 7.9 T8
FLUG014X2/CE
Emergency
14W 2 725 222 145 400 Ceiling 6.8 T5
FLUG018X2/CE 18W 2 725 222 145 400 Ceiling 6.8 T8
FLUG028X2/CE 28W 2 1335 222 145 800 Ceiling 9.9 T5
FLUG036X2/CE 36W 2 1335 222 145 800 Ceiling 9.9 T8
NON-METALLIC FLUORESCENT EMERGENCY & NON-EMERGENCYZONES 1 & 2, 21 & 22
Range:CZ0865/6
OVERVIEWThe non-metallic fluorescent lights consist of an SMC body with a polycarbonate diffuser. The light fitting is available in both non-emergency and emergency options. The emergency light fitting automatically recharges during normal operations and lamps turn on when there is a power loss
FEATURES• EOL (end of life) on ballast• Central mechanical interlocking device• Ex d switch for automatic power off when cover is unlocked• Fault, charge and discharge signal for emergency models• 1 x M25 and 2 x M25 entries at opposite ends• T5 or T8 lamp options• Internal brass plates
MATERIALS• Body – SMC• Diffuser – Polycarbonate• Lamps – 2 x 14W, 18W, 28W and 36W• Lamp holder – T8 for 18W & 36W; T5 for 14W & 28W• Rated voltage – 110-240V
INCLUSIONS• EOL (End of Life) on ballast• Dust cover on key lock• Ceiling mount brackets
CERTIFICATIONIECEx CQM 10.0012
PROTECTIONEx deqmb IIC T4 GbEx tD A21 T80ºC
AMBIENT TEMPERATURE-20ºC ~ +40ºC
SELECTION GUIDE
IP66
Product Size Catalogue No.
Pipe clamps – galvanised steel
42mm – 45mm J200
47mm – 50mm J300
59mm – 62mm J400
INSTALLATION ACCESSORIES
brenclosures.com.au Hazardous Areas 83
NON-METALLIC FLUORESCENT EMERGENCY & NON-EMERGENCYZONES 1 & 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
Front View Side View
A
C
▲
▲
▲ ▲B
▲ ▲
D
▲ ▲
A AB B
315
270
40
90
45
20
40
60
80
100120
160
180
2000
140
2 x 18W 2 x 36W
A AB B
315
270
40
90
45
20
40
60
80
100
120
160
180
2000
140
B 90 B 90
B 90 B 90
A 0 A 0 A 0 A 0
Flur
oesc
ent
Ligh
ting
84 Hazardous Areas
Catalogue No.
Dimensions (mm)
Watts Lamp TypeLength
(A)Width
(B) Mounting Weight (kg)
LEDA009X1/C/Z1 9W
LED
810 112
Ceiling
5.5
LEDA009X2/C/Z1 9W 810 222 9.8
LEDA018X1/C/Z1 18W 1420 112 6.5
LEDA018X2/C/Z1 18W 1420 222 11.55
FLUA018X1/C/Z1 18W
Fluorescent
1420 112
Ceiling
5.6
FLUA036X1/C/Z1 36W 1535 112 8.8
FLUA058X1/C/Z1 58W 1840 112 10.4
FLUA018X2/C/Z1 18W 1420 222 10.6
FLUA036X2/C/Z1 36W 1535 222 16.3
FLUA058X2/C/Z1 58W 1840 222 18.3
ALUMINIUM FLUORESCENT & LED LIGHTZONES 1 & 2, 21 & 22
FEATURES• End of lamp life rectification effect protection• Single or dual lamp options• Available with fluorescent or LED lamp source options
MATERIALS• Body – Copper-free aluminium alloy• Glass tube – Toughened glass• Ballast – Electronic• Rated voltage – AC 100–300V, 50/60H• Surface finish – Powdercoated yellow
INCLUSIONS• Fluorescent lamp options – single or twin 18W, 36W or 58W• LED lamp options – single or twin 9W and 18W
CERTIFICATIONIECEx CQM 12.0042x (Fluorescent option)IECEx CQM 12.0005 (LED option)
PROTECTIONEx d IIC T6 GbEx t IIIC T80ºC Db IP66
AMBIENT TEMPERATURE-20ºCTa+55ºC (Fluorescent)-40ºC ~ +55ºC (LED)
OVERVIEWSuitable for use in zone 1 & 2 and zone 21 & 22 applications and available in both LED and fluorescent lamp types. The aluminium body and toughened glass diffuser will withstand the most demanding conditions.
SELECTION GUIDE
Range:BAY-51 Series
IP66
Range:
brenclosures.com.au Hazardous Areas 85
ALUMINIUM FLUORESCENT & LED LIGHTZONES 1 & 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
9W x 1
18W x 1
9W x 2
18W x 2
18W x 1
36W x 1 58W x 1
18W x 2
36W x 2 58W x 2
LED Type
Fluorescent Type
A A
B
B
▲ ▲▲ ▲
▲
▲
▲ ▲
Side View – Single lamp Side View – Twin lamp
0
0 0
0 0 0
0 0 0
60
40 40 40 40 40 40
80 80 80 80 80 80
120 120 120 120 120120
160 160 160 160 160160
60 40 40
120 120 80 80
180 180 120 120
240 240 160 160
300 300 200 200
0º
0º 0º 0º 0º 0º 0º
0º 0º 0º30º
30º 30º 30º 30º 30º 30º
30º 30º 30º
60º
60º 60º 60º 60º 60º 60º
60º 60º 60º
90º
90º 90º 90º 90º 90º 90º
90º 90º 90º
Flur
oesc
ent &
LED
Ligh
ting
86 Hazardous Areas
Catalogue No.
Dimensions (mm)
Type Watts No. of LampsLength
(A)Width
(B)Height
(C)Fixings
(D) Mounting Weight (kg) Lamp Holder
FLUG014X2/C/Z2
Fluorescent
14 2 725 222 145 400
Ceiling
5.0 T5
FLUG018X2/C/Z2 18 2 725 222 145 400 5.0 T8
FLUG028X2/C/Z2 28 2 1335 222 145 800 7.9 T5
FLUG036X2/C/Z2 36 2 1335 222 145 800 7.9 T8
LED010X2/C/Z2LED
10 2 698 222 145 400Ceiling
5.0 T5 Special
LED019X2/C/Z2 19 2 1335 222 145 800 7.9 T8 Special
NON-METALLIC FLUORESCENT & LED EMERGENCY & NON-EMERGENCYZONES 2, 21 & 22
Range:CZ087 Series
OVERVIEWThe polyester central locking fluorescent and LED light fittings are manufactured from glass reinforced polyester and anti-ultraviolet polycarbonate. These light fittings are available with fluorescent or LED lamps. The material provides protection from various chemical matters in factories because of their high stability and mechanical strength and can prevent corrosion from occurring.
FEATURES• Robust construction• Standard ceiling mount• Anti-vibration lamp holders• Mechanical interlocking device• Explosion-proof distance switch for automatic power off• Nicket plated brass and stainless steel cable gland options• Through wiring
MATERIALS• Body – Glass fibre reinforced polyester• Diffuser – Polycarbonate• Fluorescent lamp – twin 14W, 18W, 28W & 36W options• LED lamp – twin 19W standard in 36W body• Lamp holder – T8 or T5, G13• Rated voltage – AC 220-240V, 50/60Hz on request
INCLUSIONS• EOL (End of Life) on ballast• Dust cover on key lock• Ceiling mount brackets• Lamps
CERTIFICATIONIECEx CQM 12.0001
PROTECTIONEx nA IIC T4 Gc/ Ex t IIIC T80ºC Db IP66Ex mb nA IIC T4 Gc/ Ex t IIIC T80ºC Db IP66Ex d nA IIC T4 Gc/ Ex t IIIC T80ºC Db IP66Ex d mb nA IIC T4 Gc/ Ex t IIIC T80ºC Db IP66
AMBIENT TEMPERATURE-25ºC ~ +50ºC
SELECTION GUIDE
IP66
brenclosures.com.au Hazardous Areas 87
NON-METALLIC FLUORESCENT & LED EMERGENCY & NON-EMERGENCYZONES 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
Front View Side View
A
C
▲
▲
▲ ▲B
▲ ▲
D
▲ ▲
Flur
oesc
ent &
LED
Ligh
ting
10W x 2
-90º 90º
-60º
-30º 0º 30º
60º
0
80
160
240
320
400
14W x 2
-90º 90º
-60º
-30º 0º 30º
60º
0
40
80
120
160
200
18W x 2
-90º 90º
-60º
-30º 0º 30º
60º
0
40
80
120
160
200
28W x 2
-90º 90º
-60º
-30º 0º 30º
60º
0
50
100
150
200
250
36W x 2
-90º 90º
-60º
-30º 0º 30º
60º
0
40
80
120
160
200
19W x 2
-90º 90º
-60º
-30º 0º 30º
60º
0
150
300
450
600
750
LED Type
Fluorescent Type
88 Hazardous Areas
Dimensions (mm)
Catalogue No. Lamp Type Watts No. of LampsLength
(A)Width
(B)Height
(C)Fixings
(D)
FLUP018X1/C/Z2
Fluorescent
18W 1 658 100 101 400
FLUP018X2/C/Z2 18W 2 658 100 101 400
FLUP036X1/C/Z2 36W 1 1268 100 101 900
FLUP036X2/C/Z2 36W 2 1268 100 101 900
FLUP058X1/C/Z2 58W 1 1568 100 101 900
FLUP058X2/C/Z2 58W 2 1568 100 101 900
LEDP009X1/C/Z2
LED
9W 1 658 100 101 400
LEDP009X2/C/Z2 9W 2 658 100 101 400
LEDP018X1/C/Z2 18W 1 1268 100 101 900
LEDP018X2/C/Z2 18W 2 1268 100 101 900
LEDP025X1/C/Z2 25W 1 1568 100 101 900
LEDP025X2/C/Z2 25W 2 1568 100 101 900
NON-METALLIC FLUORESCENT & LED LIGHTZONE 2, 21 & 22
Range:BnY81 Series
FEATURES• Dual tube light available with emergency function• Fluroescent and LED options available• Stainless steel diffuser clips• Internal brass gland plate• Installation accessories available
SELECTION GUIDE
MATERIALS• Body – Polycarbonate• Ballast – Electronic• Exposed fasteners – Stainless steel• Rated voltage – 100 – 300V AC 50/60Hz
INCLUSIONS• Fluorescent lamp options – 1 or 2 18W, 36W or 58W• LED lamp options – 1 or 2 9W and 18W• 2 x M20 x 1.5mm cable glands• Fixings
CERTIFICATIONIECEx CQM 12.0046x
PROTECTIONEx nA IIC T4 GcEx t IIIC T80ºC Db IP66
AMBIENT TEMPERATURE-60ºC ~ +55ºC
IP66
OVERVIEWSuitable for use in zone 2 and zone 21 & 22 applications and available in both LED and fluorescent lamp types. The non metallic polycarbonate body is corrosion proof and impact resistant and the polycarbonate diffuser will withstand the most demanding conditions.
brenclosures.com.au Hazardous Areas 89
NON-METALLIC & LED FLUORESCENT LIGHTZONE 2, 21 & 22
TECHNICAL DRAWINGS
LIGHT DISTRIBUTION CURVE
A A
C C
▲▲
▲ ▲
▲ ▲▲ ▲
B B
▲
▲
▲▲
Flur
oesc
ent &
LED
Ligh
ting
Front View – Single lamp Front View – Twin lamp
18W x 1
36W x 2
18W x 2
58W x 1
36W x 1
58W x 2
0
0
0
0
0
0
0º
0º
0º
0º
0º
0º
30º
30º
30º
30º
30º
30º
40
40
40
40
40
40
80
80
80
80
80
80
120
120
120
120
120
120
160
160
160
160
160
160
90º
90º
90º
90º
90º
90º
60º
60º
60º
60º
60º
60º
D D
▲ ▲▲ ▲
Plu
g &
So
cket
Ou
tlet
s
92 Hazardous Areas
IP66
PLUG & SOCKET OUTLETSZONES 1 & 2, 21 & 22
Range:CZ0251 (16Amp)CZ0252 (32Amp)CZ0253 (63Amp)CZ0254 (125Amp)
OVERVIEWDesigned to provide electrical connection within a hazardous area for mobile or portable equipment. Designed with a switch on the inside, the Ex de connection prevents sparking and is high impact resistant.
FEATURES• Internal brass gland plate• Self-cleaning inserting sleeve and contact joints• Protective cover for high degree of protection• Minimal force required when inserting or extracting• Internal switch >32A and external switch for <32A
MATERIALS• Body – SMC anti-static• Surface finish – Textured matt black
OPTIONS• Plug• Socket outlets• Panel socket outlet and coupler socket also available as an option
CERTIFICATIONIECEx CQM 10.0013 (16A)IECEx CQM 09.0009U (32A)IECEx CQM 10.0002 (63A & 125A)IECEx CQM 10.0014U (Panel)
PROTECTIONEx de IIC GbEx tD A21
AMBIENT TEMPERATURE-40ºC ~ +45ºC / 55ºC option
TECHNICAL DRAWINGS
Type
Dimensions (mm) Fixing Dimensions (mm)
Height(A)
Width(B)
Depth(C)
Height(D)
Width(E)
16Amp – 2 Poles 223 103 122 142 86
16Amp – 3 Poles 223 103 122 142 86
16Amp – 4 Poles 241 123 147 163 106
32Amp – 4 Poles 24 133 162 198 118
63Amp – 4 Poles 472 201 248 352 181
125Amp – 4 Poles 537 249 274 411 228
Type Width (mm) Diameter (mm)
16Amp – 2 Poles 163 73
16Amp – 3 Poles 163 73
16Amp – 4 Poles 187 77
16Amp – 5 Poles 187 84
32Amp – 4 Poles 237 96
63Amp – 4 Poles 262 111
125Amp – 4 Poles 298 121
▲
▲
A
▲
▲
D
▲
▲ ▲
▲
▲ ▲
B
Width Diameter
▲ ▲E
▲ ▲C
▲▲ ▲▲▲▲ ▲▲
brenclosures.com.au Hazardous Areas 93
PLUG & SOCKET OUTLETSZONES 1 & 2, 21 & 22
Catalogue No. Entries Amps Volts Colour Pins
SO-PG016A024VSP
2 x M25 16A
24V 2P
SO-PG016A042V2P 42V 2P
SO-PG016A110V2PE 110V 1PN+E
SO-PG016A240V2PE 220V 1PN+E
SO-PG016A240V3PE 220V 3P+E
SO-PG016A415V3PE 400V 3P+E
SO-PG016A490V3PE 480V 3P+ESO-PG016A690V3PE 615V 3P+E
SO-PG016A415V4PE 400V 3PN+E
SO-PG032A240V3PE
2 x M32 32A
220V 3P+E
SO-PG032A415V3PE 400V 3P+E
SO-PG032A490V3PE 480V 3P+ESO-PG032A690V3PE 615V 3P+E
SO-PG032A415V4PE 400V 3PN+E
SO-PG063A240V3PE
2 x M50 63A
220V 3P+E
SO-PG063A415V3PE 400V 3P+E
SO-PA063A415V3PE 400V 3P+E Auxillary
SO-PG063A490V3PE 480V 3P+E
SO-PA063A490V3PE 480V 3P+E Auxillary
SO-PG063A690V3PE 615V 3P+E
SO-PA063A690V3PE 615V 3P+E Auxillary
SO-PG063A415V4PE 400V 3P+E
SO-PA063A415V4PE 400V 3P+E Auxillary
SO-PG125A240V3PE
2 x M63 125A
220V 3P+E
SO-PG125A415V3PE 400V 3P+E
SO-PA125A415V3PE 400V 3P+E Auxillary
SO-PG125A490V3PE 480V 3P+E
SO-PA125A490V3PE 480V 3P+E Auxillary
SO-PG125A690V3PE 615V 3P+E
SO-PA125A690V3PE 615V 3P+E Auxillary
SO-PG125A415V4PE 400V 3P+E
SO-PA125A415V4PE 400V 3P+E Auxillary
SELECTION GUIDE – PLUGS
Sockets
Product Catalogue No. Entries Amps Volts Colour Pins
Wall
SO-SW016A024V2P
2 x M25 16A
24V 2PSO-SW016A042V2P 42V 2PSO-SW016A110V2PE 110V 2P+E
SO-SW016A240V2PE 220V 2P+E
SO-SW016A240V3PE 220V 3P+E
SO-SW016A415V3PE 400V 3P+E
SO-SW016A490V3PE 480V 3P+E
SO-SW016A690V3PE 615V 3P+E
SO-SW016A415V4PE 400V 3PN+E
SO-SW032A240V3PE
2 x M32 32A
220V 3P+E
SO-SW032A415V3PE 400V 3P+E
SO-SW032A490V3PE 480V 3P+E
SO-SW032A690V3PE 615V 3P+E
SO-SW032A415V4PE 400V 3PN+E
SO-SW063A240V3PE
2 x M50 63A
220V 3P+E
SO-SW063A415V3PE 400V 3P+E
SO-SA063A415V3PE 400V 3P+E Auxillary
SO-SW063A490V3PE 480V 3P+E
SO-SA063A490V3PE 480V 3P+E Auxillary
SO-SW063A690V3PE 615V 3P+E
SO-SA063A690V3PE 615V 3P+E Auxillary
SO-SW063A415V4PE 400V 3PN+E
SO-SA063A415V4PE 400V 3PN+E Auxillary
SO-SW125A240V3PE
2 x M63 125A
220V 3P+E
SO-SW125A415V3P 400V 3P+E
SO-SA125A415V3PE 400V 3P+E Auxillary
SO-SW125A490V3PE 480V 3P+E
SO-SA125A490V3PE 480V 3P+E Auxillary
SO-SW125A690V3PE 615V 3P+E
SO-SA125A690V3PE 615V 3P+E Auxillary
SO-SW125A415V4PE 400V 3PN+E
SO-SA125A415V4PE 400V 3PN+E Auxillary
Panel
SO-SP016A024V2P
2 x M25 16A
24V 2PSO-SP016A042V2P 42V 2PSO-SP016A110V2PE 110V 1PN+ESO-SP016A240V2PE 220V 1PN+ESO-SP016A240V3PE 220V 3P+ESO-SP016A415V3PE 400V 3P+E
SO-SP016A490V3PE 480V 3P+E
SO-SP016A690V3PE 615V 3P+E
SO-SP016A415V4PE 400V 3PN+E
SO-SP032A240V3PE
2 x M32 32A
220V 3P+E
SO-SP032A415V3PE 400V 3P+E
SO-SP032A490V3PE 480V 3P+E
SO-SP032A690V3PE 615V 3P+E
SO-SP032A415V4PE 400V 3PN+E
Coupler
SO-SC016A024V2P
2 x M25 16A
24V 2PSO-SC016A042V2P 42V 2PSO-SC016A110V2PE 110V 1PN+ESO-SC016A240V2PE 220V 1PN+ESO-SC016A240V3PE 220V 3P+ESO-SC016A415V3PE 400V 3P+E
SO-SC016A490V3PE 480V 3P+E
SO-SC016A690V3PE 615V 3P+E
SO-SC016A415V4PE 400V 3PN+E
SO-SC032A240V3PE
2 x M32 32A
220V 3P+E
SO-SC032A415V3PE 400V 3P+E
SO-SC032A490V3PE 480V 3P+E
SO-SC032A690V3PE 615V 3P+E
SO-SC032A415V4PE 400V 3PN+E
SELECTION GUIDE – SOCKETS
Plug
& S
ocke
t O
utle
ts
Wea
ther
pro
of
Lig
hti
ng
& E
ncl
osu
res
96 Hazardous Areas
ALUMINIUM WEATHER-PROOF FLOODLIGHT
Range:M0874/3 Series
MATERIALS• Body – Copper-free aluminium alloy• Glass tube – Toughened glass• Ballast – Electronic• Rated voltage – AC 220V, 50/60Hz• Surface finish – Powdercoated grey
INCLUSIONS• Mounting accessories• UV resistant lens
PROTECTIONWF1, IP66
AMBIENT TEMPERATURE-40ºC Ta 50ºC
FEATURES• Convenient mounting and ease-of-service• Multiple mounting options available• Energy saving• 2600 – 2800 lm
OVERVIEWThe weather-proof floodlights are manufactured from aluminium alloy giving exceptional corrosion resistance. An impact resistant polycarbonate lens, weatherproof terminal box make this unit suitable for extreme conditions.
SELECTION GUIDE
Catalogue No.
Dimensions (mm)
Width Height Mounting Weight (kg)
ESA40FLD/C/WP 300 235 Bracket 7.0
ESA40FLD/P9/WP 485 232 Pole 90º 7.0
ESA40FLD/P2/WP 415 262 Pole 25º 7.0
ESA40FLD/W/WP 420 235 Wall 7.0
Bracket mount 90º Pole mount
Wall mount25º Pole mount
Product Description Catalogue No.
Brackets
For ceiling mount D8722/2
For general mounting D8701/2
For pendant mounting D8702/2
Straight pipe¾" galvanised steel pipe withpowdercoated surface
D732
Lamp polesFence type (set) D8725
Flange type (set) D8726
INSTALLATION ACCESSORIES
IP66
brenclosures.com.au Hazardous Areas 97
ALUMINIUM WEATHER-PROOF FLOODLIGHT
TECHNICAL DRAWINGS
Wea
ther
proo
f
235m
m
▲
▲
Front View – bracket mount
300mm
▲ ▲
232m
m
▲
▲
Front View – 90º pole mount
485mm
▲ ▲
262m
m
235m
m
▲
▲
▲
▲
Front View – 25º pole mount
Front View – wall mount
415mm
420mm
▲
▲
▲
▲
-90º 90º
-60º
-30º 0º 30º
60º
0
80
160
240
320
400
LIGHT DISTRIBUTION CURVE
98 Hazardous Areas
Range:M0242
IP65
MATERIALS• Body – Glass reinforced polyester• Rated voltage – 380V maximum
INCLUSIONS• Control box• Customised to suit application requirements
AMBIENT TEMPERATURE-40ºC ≤ Ta ≤ +40ºC / 55ºC option
OVERVIEWA range of non-metallic control boxes for applications that do not require stainless steel. Glass fibre reinforced polyester is weatherproof and anti-corrosive.
FEATURES• Individual enclosures can be combined into large units• Standard pitch between two components is 40mm• Built-in board front mounting rail type• Cable entry can be set to the top, bottom, left or right side
of the control box• Cable gland can be metal or plastic
NON-METALLIC CONTROL BOX
brenclosures.com.au Hazardous Areas 99
NON-METALLIC CONTROL BOX
Catalogue No.
Dimensions (mm)
Max. number of operatorsHeight
(A)Width
(B)Depth
(C)
WTBG2A 2 122 122 96
WTBG2B 2 122 122 96
WTBG4 4 220 134 96
WTBG9 9 275 160 96
WTBG16 16 352 234 96
WTBG28 28 352 352 96
WTBG56 56 352 706 161
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
TECHNICAL DRAWINGS
Front View Side View
▲
▲
A
▲ ▲▲ ▲B C
Wea
ther
proo
f
100 Hazardous Areas
Range:M0242
IP65
MATERIALS• Body – SMC polyester• Rated voltage – 380V maximum
INCLUSIONS• Control box• 3 standard sizes• 1 – 9 installed componenets• Custom built to suit application requirements
AMBIENT TEMPERATURE-40ºC ≤ Ta ≤ +55ºC / 40ºC option
OVERVIEWA range of non-metallic control boxes for applications that do not require stainless steel. Glass fibre reinforced polyester is weatherproof and anti-corrosive.
FEATURES• Three types of standard enclosures• Explosion-proof operation head fitted to make enclosure
more reliable and durable• Easy to install• Flexible configurations• Stable and high anti-corrosion chemical performance• Two types of vertical foot trays• Ammeter, signal, switch and start/stop options available• Pendant, pipe or vertical mounting options
NON-METALLIC WEATHERPROOF CONTROL BOX
brenclosures.com.au
NON-METALLIC WEATHERPROOF CONTROL BOX
Catalogue No.
Dimensions (mm)
Max. number of operatorsHeight
(A)Width
(B)Depth
(C)
WCSG2 2 170 122 96
WCSG4 4 220 134 96
WCSG9 9 275 160 96
! These enclosures are sold with controls and terminals fi tted. Empty enclosures are not available for sale.Contact your local sales engineer to discuss your specifi c requirements.
SELECTION GUIDE
TECHNICAL DRAWINGS
Wea
ther
proo
f
▲
▲
A
▲ ▲▲ ▲B C
Front View Side View
Head Office 51 Stradbroke Street Heathwood QLD 4110 AustraliaPO Box 1151 Browns Plains BC QLD 4118 AustraliaT: +61 7 3714 1000 F: +61 7 3714 1081
QLD Office – Sales & Warehouse51 Stradbroke Street Heathwood QLD 4110 AustraliaPO Box 1151 Browns Plains BC QLD 4118 AustraliaT: +61 7 3714 1111 F: +61 7 3714 1091
North QLD Office – Sales & Warehouse25 Dalrymple Road Garbutt QLD 4814 AustraliaPO Box 7615 Garbutt QLD 4815 AustraliaT: +61 7 4727 1900 F: +61 7 4755 0675
NSW & ACT Office – Sales & WarehouseUnit 12/100 Belmore Road North Riverwood NSW 2210 AustraliaPO Box 90 Riverwood NSW 2210 AustraliaT: +61 2 9915 9555 F: +61 2 9584 0055
Newcastle – DistributionRoss Joice Agencies Pty Ltd109-111 Broadmeadow Road Broadmeadow NSW 2292 AustraliaT: +61 2 4961 4433 F: +61 2 4961 2498
VIC & TAS Office – Sales & Warehouse50-52 Sunmore Close Heatherton VIC 3202 AustraliaT: +61 3 9552 0552 F: +61 3 9551 8636
SA & NT Office – Sales & Warehouse505 Grand Junction Way Wingfield SA 5013 AustraliaT: +61 8 8417 6222 F: +61 8 8268 3675
Northern Territory – DistributionJewell Distributors Pty LtdCnr Hidden Valley & Beaton Roads Berrimah NT 0828 AustraliaT: +61 8 8947 0870 F: +61 8 8947 0764
WA Office – Sales & Warehouse6 Montgomery Way Malaga WA 6090 AustraliaT: +61 8 6310 4777 F: +61 8 9249 6776
National SalesT: 1300 Enclosures (1300 362 567)F: 1300 796 599E: [email protected]
brenclosures.com.au