bpn-sas3-216el1/el2 backplanevi bpn-sas3-216el1/el2 backplane user's guide returning...
TRANSCRIPT
BPN-SAS3-216EL1/EL2
BACKPLANE
USER’S GUIDE
1.0a
ii
BPN-SAS3-216EL1/EL2 Backplane User's Guide
Manual Revision 1.0a Release Date: March 11, 2015
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document.
Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2015 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America
iii
Preface
Table of Contents
Contacting Supermicro ........................................................................................v Returning Merchandise for Service....................................................................vi Overview of the BPN-SAS3-216EL1/EL2 Backplanes ..................................... vii
Chapter 1 Safety Guidelines1-1 ESD Safety Guidelines ................................................................................... 1-1
1-2 General Safety Guidelines .............................................................................. 1-11-3 An Important Note to Users ............................................................................ 1-21-4 Introduction to the BPN-SAS3-216EL1/EL2 Model Backplane....................... 1-2
Chapter 2 Connectors, Daughter Cards and LEDs2-1 Connectors and Daughter Cards .................................................................... 2-12-2 FrontConnectorandPinDefinitions ............................................................... 2-22-3 Front Connectors and LED Indicators ............................................................ 2-6
Chapter 3 Dual Port and Cascading Configurations3-1 Single and Dual Port Expanders..................................................................... 3-1
Single Ports ..................................................................................................... 3-1Dual Ports ....................................................................................................... 3-1
3-2 Failover ............................................................................................................ 3-2Single Host Bus Adapter ................................................................................. 3-2Single Host Bus Adapter Failover ................................................................... 3-2
3-3 Failover with RAID Cards and Multiple HBAs ................................................ 3-3Dual Host Bus Adapter .................................................................................. 3-3Dual Host Bus Adapter Failover...................................................................... 3-3
3-4 Chassis Control Card and Support Cables ..................................................... 3-4Chassis Control Card ...................................................................................... 3-4Connectioning an Internal Host Bus Adapter to the Backplane .................... 3-5Supported Internal HBA Cables ...................................................................... 3-5Connecting an External Host Bus Adapter to the Backplane ........................ 3-7Single External Host Bus Adapter ................................................................. 3-7Dual External Host Bus Adapter .................................................................... 3-7Supported External HBA to Backplane Cable ................................................ 3-8Connecting Multiple Backplanes in a Single Channel Environment ............... 3-9SingleHBAConfigurationCables ................................................................. 3-10Connecting Multiple Backplanes in a Dual Channel Environment ................3-11DualHBAConfigurationCables .................................................................... 3-12
iv
BPN-SAS3-216EL1/EL2 Backplane User's Guide
3-5 SupportedCascadingConfigurations ........................................................... 3-13Server System with Single SAS HBA ........................................................... 3-14DualSASHBAandCascadedConfiguration ............................................... 3-15DualSASHBAandCascadedConfigurationwithBranching ...................... 3-16
v
Preface
Contacting Supermicro
HeadquartersAddress: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
[email protected] (Technical Support)
Website: www.supermicro.com
EuropeAddress: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Website: www.supermicro.nl
Asia-PacificAddress: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Email: [email protected]
Website: www.supermicro.com.tw
vi
BPN-SAS3-216EL1/EL2 Backplane User's Guide
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required be-fore any warranty service will be rendered. You can obtain service by calling your vendor for a Returned Merchandise Authorization (RMA) number. When returning to the manufacturer, the RMA number should be prominently displayed on the outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and handling charges will be applied for all orders that must be mailed when service is complete.
For faster service, RMA authorizations may be requested online (http://www.supermicro.com/support/rma/).
Whenever possible, repack the backplane in the original Supermicro box, using the original packaging materials. If these are no longer available, be sure to pack the backplane in an anti-static bag and inside the box. Make sure that there is enough packaging material surrounding the backplane so that it does not become damaged during shipping.
This warranty only covers normal consumer use and does not cover damages in-curred in shipping or from failure due to the alteration, misuse, abuse or improper maintenance of products.
Duringthewarrantyperiod,contactyourdistributorfirstforanyproductproblems.
vii
Preface
Overview of the BPN-SAS3-216EL1/EL2 Backplanes
The BPN-SAS3-216EL1/EL2 model backplanes consist of a BPN-SAS3-216EB backplane (A) with one or two BPN-SAS3-216EL daughter cards (B and C) mounted ontherearofthebackplane.Thefrontofthebackplaneisdefinedasthesidewhichfaces toward the front of the chassis when installed.
The BPN-SAS3-216EL1 model consists of the BPN-SAS3-216EB backplane (A) and one BPN-SAS3-216EL primary daughter card (B), mounted on the right-hand side of the backplane.
The BPN-SAS3-216EL2 model consists of the BPN-SAS3-216EB backplane (A) with a BPN-SAS3-216EL primary daughter card mounted on the right (B) and a BPN-SAS3-216EL secondary daughter card mounted on the left (C).
Components on the front side of the BPN-SAS3-216EB backplane include twenty-four SAS connectors and their respecitve activity and failure LEDs. Components on the rear side of the backplane include jumpers and power connectors. The daughter card'scomponentsincludeSASports,flashandexpanderchips.
BPN-SAS3-216EL Secondary Daughter Card (C)
BPN-SAS3-216EB Backplane (A)
BPN-SAS3-216EL Primary Daughter Card (B)
Rear Side of the Backplane
Front Side of the Backplane
Left
Right
viii
BPN-SAS3-216EL1/EL2 Backplane User's Guide
Notes
1-1
Chapter 1 Safety Guidelines
Chapter 1
Safety Guidelines
To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components.
1-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent damage to your system, it is important to handle the backplane very carefully. The following measures are generally sufficient to protect your equipment from ESD.•Use a grounded wrist strap designed to prevent static discharge.
•Touch a grounded metal object before removing a component from the antistatic bag.
•Handle the backplane and daughter cards by their edges only; do not touch the components, peripheral chips, memory modules or gold contacts.
•When handling chips or modules, avoid touching their pins.
•Put the backplane and peripherals back into their antistatic bags when not in use.
1-2 General Safety Guidelines
•Always disconnect power cables before installing or removing any components from the computer, including the backplane.
•Disconnect the power cable before installing or removing any cables from the backplane.
•Make sure that the backplane is securely and properly installed on the mother-board to prevent damage to the system due to power shortage.
1-2
BPN-SAS3-216EL1/EL2 Backplane User's Guide
1-3 An Important Note to Users
All images and layouts shown in this user's guide are based upon the latest PCB Revision available at the time of publishing. The card you have received may or may not look exactly the same as the graphics shown in this manual.
1-4 Introduction to the BPN-SAS3-216EL1/EL2 Backplane
The BPN-SAS3-216EL1/EL2 model backplane has been designed to utilize the most up-to-date technology available, providing your system with reliable, high-quality performance.
This manual reflects the BPN-SAS3-216EB Revision 1.00 backplane, the mostcurrent release available at the time of publication.
This manual also describes the BPN-SAS3-216EL daughter card, Revision 1.01, the most current release available at the time of publication. Always refer to the Supermicro website at www.supermicro.com for the latest updates, compatible parts andsupportedconfigurations.
2-1
Chapter 2 Connectors, Daughter Cards, Jumpers and LEDs
123
12
31
DESIGNED IN USA
BAR CODE
14
1
4
1
4
14
14
14
A C
AC
AC
+++ +
+
+
+
+ +
+
++ +
+
+ ++
++
++
+ +
++
321 4
321 4
6
24
6
19 24
2
139
40
2
1 39
40
2
1 39
40
2
1 39
40
157
1604
1 157
1604
1
REV:
BPN-SAS3-216EB
1.01
ACTLED
C410
C405
C407
C404
MH_S4MH_S1
MH_P4 MH_P1
MH_P2MH_P3MH_S2MH_S3
MH4 MH3 MH2 MH1
PWR6
PWR1
PWR2
PWR3
PWR4
PWR5
OVERHEATFAIL1
12V_LED1
5V_LED1
F9
F7
F14
F13
EC25EC26EC27 EC28
EC9 EC8
EC7
EC6 EC5
EC4
EC3
EC24
EC23
EC22 EC21
EC20
EC2
EC19
EC18EC17
EC16
EC15
EC14EC13
EC12
EC11
EC10
EC1
Q5
J38
PRI_I2C
J33
J35
J36
J32
J34 J31
R100
R52
U25U27U28
TP1
R128
BC144
C146
BC9
SECONDARY EXPANDER PRIMARY EXPANDER
SMB
Chapter 2
Connectors, Daughter Cards and LEDs
2-1 Connectors and Daughter Cards
Connectors
1. Flash Chip
2. Expander Chip
3. UART Connector: J5
4. SDB Connector: J10
Figure 2-1. Connectors and Daughter Cards on the BPN-SAS3-216EL
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
5
13 14
11
Rear of BPN-SAS3-216EB Backplane
Front of BPN-SAS3-2l6EL Daughter Card(s)
12
6
17
1717
17
17
17
5. Primary Expander Connector: PRI_I2C
6. SMB Expander Connector: J38
7. Power Connectors: PWR1 - PWR6
2-2
BPN-SAS3-216EL1/EL2 Backplane User's Guide
2-2 FrontConnectorandPinDefinitions
BackplaneMain Power
4-Pin Connector
Pin#Definition
1 +12V
2 and 3 Ground
4 +5V
7. Backplane Main Power Connectors
The 4-pin connectors are designated PWR1 - PWR6. They provide power to the backplane. See the table on the right for pindefinitions.
2. Expander Chips
This expander chip allows the backplane to support dual ports, cascading, and failover.
1. Flash Chips
The flash chip enhances the backplanememory.
5. Expander Connector
The primary expander connector is desig-nated PRI_i2C and is reserved for future expansion.
6. Expander Connector
The secondary expander connector is des-ignated J8. It is used to connect the chas-sis power cord and CSE-PTJBOD-CB3 for JBODconfiguration.
3. UART Connector
The UART connector is designated UART and J5. It is used for manufacturer's diag-nostic purposes only.
4. SDB Connector
The SDB connector is designated SDB and J10. It is the debug connector and is used for manufacturer's diagnostic purposes only.
2-3
Chapter 2 Connectors, Daughter Cards, Jumpers and LEDs
2-3 Front Connectors and LED Indicators
Front SAS/SATA Connectors
FrontConnector
SAS Drive Number
FrontConnector
SAS Drive Number
SAS #J0 SAS/SATA HDD #1 SAS #J12 SAS/SATA HDD #13
SAS #J1 SAS/SATA HDD #2 SAS #J13 SAS/SATA HDD #14
SAS #J2 SAS/SATA HDD #3 SAS #J14 SAS/SATA HDD #15
SAS #J3 SAS/SATA HDD #4 SAS #J15 SAS/SATA HDD #16
SAS #J4 SAS/SATA HDD #5 SAS #J16 SAS/SATA HDD #17
SAS #J5 SAS/SATA HDD #6 SAS #J17 SAS/SATA HDD #18
SAS #J6 SAS/SATA HDD #7 SAS #J18 SAS/SATA HDD #19
SAS #J7 SAS/SATA HDD #8 SAS #J19 SAS/SATA HDD #20
SAS #J8 SAS/SATA HDD #9 SAS #J20 SAS/SATA HDD #21
SAS #J9 SAS/SATA HDD #10 SAS #J21 SAS/SATA HDD #22
SAS #J10 SAS/SATA HDD #11 SAS #J22 SAS/SATA HDD #23
SAS #J11 SAS/SATA HDD #12 SAS #J23 SAS/SATA HDD #24
1
41
4
1
41
41
41
41
AC AC AC
ACAC AC AC
AC ACA
C AC ACA
C ACAC AC
ACACA
C AC
AC A
C AC A
C
ACAC
ACA
C
ACACACACAC
ACACA
C AC
ACACACACACACACACACACAC
3 2 14
3 2 14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S1P1
P15
S14
S1P1
P15
S14
S1
S7
P1
P15
S8
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S1
S7
P1
P15
S8
S14
S1
S7
P1
P15
S8
S14
S1S7
P1P15
S8S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
S1P1
P15
S14
C412
C10
C15C16
C25C26
C28
C29C30C31
C32
C36
C4
ACT0 ACT1 ACT10 ACT11 ACT12 ACT13 ACT14 ACT15 ACT16 ACT17 ACT18 ACT19ACT2 ACT20 ACT21 ACT22 ACT23ACT3 ACT4 ACT5 ACT6 ACT7 ACT8 ACT9FAIL9FAIL8FAIL7FAIL6FAIL5FAIL4FAIL3 FAIL23FAIL22FAIL21FAIL20FAIL2 FAIL19FAIL18FAIL17FAIL16FAIL15FAIL14FAIL13FAIL12FAIL11FAIL10FAIL1FAIL0
F8
F17
F10
CR10
CR11
CR5 CR8D19
D20 D21D22
J12J0 J13 J17J14 J15 J16 J21 J22J18J4 J6 J7 J8 J19 J20 J23J1 J10 J11J2 J3 J5J9
R181
R44
R41
R40
R43
R37
R179 R180
R39
R38
R178
C411
SAS
#J0
SAS
#J1
SAS
#J2
SAS
#J3
SAS
#J4
SAS
#J5
SAS
#J6
SAS
#J7
SAS
#J8
SAS
#J9
SAS
#J10
SAS
#J11
SAS
#J12
SAS
#J13
SAS
#J14
SAS
#J15
SAS
#J16
SAS
#J17
SAS
#J18
SAS
#J19
SAS
#J20
SAS
#J21
SAS
#J22
SAS
#J23
AC
T #2
3, F
AIL
#23
AC
T #2
2, F
AIL
#22
AC
T #2
1, F
AIL
#21
AC
T #2
0, F
AIL
#20
AC
T #1
9, F
AIL
#19
AC
T #1
8, F
AIL
#18
AC
T #1
7, F
AIL
#17
AC
T #1
6, F
AIL
#16
AC
T #1
5, F
AIL
#15
AC
T #1
4, F
AIL
#14
AC
T #1
3, F
AIL
#13
AC
T #1
2, F
AIL
#12
AC
T #1
1, F
AIL
#11
AC
T #1
0, F
AIL
#10
AC
T #9
, FA
IL#9
AC
T #8
, FA
IL#8
AC
T #7
, FA
IL#7
AC
T #6
, FA
IL#6
AC
T #5
, FA
IL#5
AC
T #4
, FA
IL#4
AC
T #3
, FA
IL#3
AC
T #2
, FA
IL#2
AC
T #1
, FA
IL#1
AC
T #0
, FA
IL#0
Figure 2-2. Front Connectors and LEDs
2-4
BPN-SAS3-216EL1/EL2 Backplane User's Guide
Front LED Indicators
Front LED Hard Drive Activity Failure LEDSAS #J0 ACT #0 FAIL #0
SAS #J1 ACT #1 FAIL #1
SAS #J2 ACT #2 FAIL #2
SAS #J3 ACT #3 FAIL #3
SAS #J4 ACT #4 FAIL #4
SAS #J5 ACT #5 FAIL #5
SAS #J6 ACT #6 FAIL #6
SAS #J7 ACT #7 FAIL #7
SAS #J8 ACT #8 FAIL #8
SAS #J9 ACT #9 FAIL #9
SAS #J10 ACT #10 FAIL #10
SAS #J11 ACT #11 FAIL #11
SAS #J12 ACT #12 FAIL #12
SAS #J13 ACT #13 FAIL #13
SAS #J14 ACT #14 FAIL #14
SAS #J15 ACT #15 FAIL #15
SAS #J16 ACT #16 FAIL #16
SAS #J17 ACT #17 FAIL #17
SAS #J18 ACT #18 FAIL #18
SAS #J19 ACT #19 FAIL #19
SAS #J20 ACT #20 FAIL #20
SAS #J21 ACT #21 FAIL #21
SAS #J22 ACT #22 FAIL #22
SAS #J23 ACT #23 FAIL #23
3-1
Chapter 3 Dual Port and Cascading Configurations
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
Port B: Secondary Expander Ports
From HBA
From HBA#2From HBA#1
To Lower Backplane in Cascaded System
To Lower Backplane in Cascaded System
Port A: Primary Expander Ports
Chapter 3
DualPortandCascadingConfigurations
3-1 Single and Dual Port Expanders
Single PortsBPN-SAS3-216EL1 model backplanes have a single-port expander on the daughter card that accesses all of the drives and supports cascading.
Figure3-2.BPN-SAS3-216EL2DualPortConfiguration
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
To Lower Backplane in Cascaded System
Dual PortsBPN-SAS3-216EL2 model backplanes have dual-port expanders on the daughter cards that access all of the hard drives. These dual-port expanders support cascad-ing, failover, and recovery.
Port A Primary Ports Expander 1
Figure3-1.BPN-SAS3-216EL1SinglePortConfiguration
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-2
BPN-SAS3-216EL1/EL2 Backplane User's Guide
Single Host Bus AdapterIn a single host bus configuration, thebackplane connects to one Host Bus Adapter (HBA).
The BPN-SAS3-216EL2 model backplane has two expanders which enable effec-tive failover and recovery.
3-2 Failover
Port A Expander 1
Port B Expander 2
Single Host Bus Adapter Failover
If the expander or data path in Port A fails, the system automatically switches to Port B with application software or failover support.
Figure 3-4. Single HBA Failover
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9ADESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
SAS HBA
Port A Expander 1
Port B Expander 2
Figure 3-3. Single HBA
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9ADESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
SAS HBA
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-3
Chapter 3 Dual Port and Cascading Configurations
Port A Expander 1
Port B Expander 2
Dual Host Bus Adapter In a dual host bus configuration, thebackplane connects to two HBA's.
Figure 3-5. Dual HBA
Dual Host Bus Adapter Failover
If the expander or data path in Port A fails, the system automatically switches to Port B. This maintains a full connec-tion to all drives.
Figure 3-6. Dual HBA Failover
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
SAS HBA
SAS HBA
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9ADESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
SAS HBA
SAS HBA
Port A Expander 1
Port B Expander 2
IMPORTANT: For RAID controllers, redundancy is achieved through port failover. For multiple HBAs MPIO software is required to achieve failover protection.
3-3 Failover with RAID Cards and Multiple HBAs
TheBPN-SAS3-216ELbackplanemaybeconfiguredforfailoverwithmultipleHBAsusing either RAID controllers or HBAs to acheive failover protection.
RAID Controllers: If RAID controllers are used, then the failover is accomplished through port failover on the same RAID card.
HBAs: If multiple HBAs are used to achieve failover protection and load balancing, LinuxMPIOsoftwaremustbe installedandcorrectlyconfiguredtoperformthe load balancing and failover tasks.
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-4
BPN-SAS3-216EL1/EL2 Backplane User's Guide
3-4 Chassis Control Card and Support Cables
Power Card
Part Number Part Type Where Used
CSE-PTJBOD-CB3 Control card
Allows the chassis to be used as a JBOD (Just a Bunch of Drives) system, which supports IPMI for remote on/off control.
Chassis Control CardInacascadedconfiguration,thefirstchassisincludesamotherboardandatleastone host bus adapter (HBA). Other servers in this enclosed system must be equipped with a control card. This section describes the supported control card for the BPN-SAS3-216EL series backplane.
For more information, see the Supermicro website at http://www.supermicro.com.
12
56
1 3
13
321 4
321 4
321 4
321 4
24
13
12
1
+
+++
A
1
E
3
K
79
R
321
123
12
78
12
78
1
2
78
12
78
1
2
19
20
1
5
1
5
6
9
12
10
+
+
4
1
4
1
4
1
4
1
4
1
4
1
4
1
4
1
4
1
4
1
1 7
6 121517
1314
16 19
18
A
C
A
C
A E K R Y
1
5
10
20
1213 24
25
363748
MH2
MH4
JP6
U*
U18U17 U16U14U13
JP7
JP5
JP1
JP2JP3
JP4
JPW1
BT1
C10
Y2
U9
MH3
MH1
C153
J4 J6 J7J5
JF1
JPI2C1
J3
J2
U12
U11
C131
C8
C9
FAN
1
FAN2 FAN3 FAN4 FAN5 FAN6
FAN
7
FAN
8
FAN10FAN9
J8
U8
Q27
Q16
D16
FB1
C6
C21
C4
LE2
LE1
F1
Y1
Q5Q4
U1
U5
U6
U3
U7L7
JP5
JP7
2-3:DH
CP1-2:Static IP
2-3:SAS2_847D1-2:SAS3 JF1
NMI X PWR LED X NIC1 X OH/FF X RST ON PWR ON
%
#
Figure 3-7. Chassis Control Card (Sold Separately)
3-5
Chapter 3 Dual Port and Cascading Configurations
Figure 3-9. Dual Internal Host Bus Adapter
Supported Internal HBA CablesUse the following cables to create connections between the internal HBA and BPN-SAS3-216EL model backplane. The cables required depend upon the HBA connector.
Connecting an Internal HBA to the Backplane The following section lists the most common cables used to connect the HBA to the backplane.
Figure 3-8. Single Internal Host Bus Adapter
HBA
HBA
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
HBA
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9ADESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
IMPORTANT: See Section 3-3 of this manual, Failover with RAID Cards and Multiple HBAsforimportantinformationonsupportedconfigurations.
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-6
BPN-SAS3-216EL1/EL2 Backplane User's Guide
Cable Name: Internal iPass (Mini-SAS) to HD (Mini-SAS)
Part #: CBL-SAST-0508-01 Length: 50 cm (19 inches)
Part #: CBL-SAST-0507-01 Length: 80 cm (31 inches)
Description: This cable has an iPass (SFF-8087/Mini-SAS) connector (36-pin) at one end and a Mini-SAS HD (SFF-8643) connector at the other end. It connects from the SAS2 HBA to the BPN-SAS3-216EL model backplane.
Cable name: Internal HD (Mini-SAS) to HD (Mini-SAS)
Part #: CBL-SAST-0568 Length: 35 cm (13 inches)
Part #: CBL-SAST-0593 Length: 60 cm (23 inches)
Part #: CBL-SAST-0531 Length: 80 cm (31 inches)
Description: This cable has a Mini-SAS HD (SFF-8643) connector at both ends. It connects from the SAS3 HBA to the BPN-SAS2-216EL model backplane.
3-7
Chapter 3 Dual Port and Cascading Configurations
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
Connecting an External HBA to the Backplane Thisbackplanesupportsexternalhostbusadapters.Inthisconfiguration,theHBAand the backplane are in different physical chassis. This allows a JBOD (Just a BunchOfDrives)configurationfromanexistingsystem.
HBA Power Card
HBA
Dual External Host Bus Adapter
CBL-SAST-0573 External Mini-SAS HD Cable
HBA Power Card
CBL-SAST-0573 External Mini-SAS HD Cable
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
Figure 3-10. Single External Host Adapter
Figure 3-11. Dual External Host Bus Adapter
Single External Host Bus Adapter
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
IMPORTANT: See Section 3-3 of this manual, Failover with RAID Cards and Multiple HBAsforimportantinformationonsupportedconfigurations.
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-8
BPN-SAS3-216EL1/EL2 Backplane User's Guide
CBL-SAST-0531 (Internal Cable)
CBL-SAST-0573 (External Cable)
Mini-SAS HD Internal to External Adapter
AOM-SAS3-16I16E-LP
Mini-SAS HD Internal to External Adapter
AOM-SAS3-16I16E-LP
HBA
Power Card
Port A Expander 1
Connecting Multiple Backplanes in a Single Channel Environment
This section describes the cables used when cascading from a single HBA. These connections use CBL-SAST-0531 internal cables and CBL-SAST-0573 external cables.
Figure3-12.SingleHBAConfiguration
Port A Expander 1
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-9
Chapter 3 Dual Port and Cascading Configurations
Cable Name: 16-port Mini-SAS HD Internal to External Cable Adapter with LP Bracket
Part #: AOM-SAS3-16I16E-LPPorts: Four wide-ports (sixteen ports total)Placement: Internal cable with adapterDescription: Internal cable, connects the SAS3 backplane to external ports.
Cable Name: 1 Meter External Mini-SAS HD to External Mini-SAS HD Cable
Part #: CBL-SAST-0573Ports: SinglePlacement: External CableDescription: External cascading cable, connects ports between servers and JBODs.
SingleHBAConfigurationCables
Figure 3-13. External Mini-SAS HD to External Mini-SAS HD Cable
Figure 3-14. Mini-SAS HD Internal to External Adapter
3-10
BPN-SAS3-216EL1/EL2 Backplane User's Guide
CBL-SAST-0573 (External Cable)
Port A Expander 1
HBA HBA
Power Card
Port A Expander 1Port B Expander 2
CBL-SAST-0531 (Internal Cable)
Connecting Multiple Backplanes in a Dual Channel Environment
This section describes the cables used when cascading from dual HBAs. These con-nections use CBL-SAST-0531 internal cables and CBL-SAST-0573 external cables.
Figure3-15.DualHBAConfiguration
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9ADESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
Port B Expander 2
IMPORTANT: See Section 3-3 of this manual, Failover with RAID Cards and Multiple HBAsforimportantinformationonsupportedconfigurations.
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-11
Chapter 3 Dual Port and Cascading Configurations
Cascading allows the system to access data at a faster rate by allowing several backplanes to share resources to reduce latency time.
The first backplane in a cascaded system requires amotherboard and anHBA.Other servers require a chassis control card with no motherboard and no HBA. For moreinformation,specificchassismanualsareavailableatwww.supermicro.com.
3-5 SupportedCascadingConfigurations
CBL-SAST-0531 (Internal Cable)
CBL-SAST-0573 (External Cable)
HBA
Port A Expander 1
Power Card
Port A Expander 1
Power Card
Port A Expander 1
Figure3-16.SimpleCascadedConfiguration
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-12
BPN-SAS3-216EL1/EL2 Backplane User's Guide
CBL-SAST-0573 (External Cables)
Port A Expander 1
HBA
Power Card
Port A Expander 1
Power Card
CBL-SAST-0531 (Internal Cable)
Dual Port Cable Assembly
Figure3-17.DualSASHBAwithCascadedConfiguration
DualSASHBAandCascadedConfiguration
HBA
Port B Expander 2
Port B Expander 2
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9ADESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
DESIGNED IN USA
BPN-SAS3-216EL REV:1.00
WWN ADDRESS
BAR CODE
A1A2
CG1
CG2
B1
B2
C1C2
CG3
M8M7
O8
N8N7
P8P7
O7
CG5
CG4
1 2 3
A
1
E
5
H
5
1
AEH
14131211
2 24 2212
11
22
1211
2212
11
++
+ ++41
1
4
1
4
1 2
9
8
110
1
5
10
15
20
25
30
AKAEYRKEA
J9
L8
U3
C98
C99
C102C103
C121
C165
C96
C12C11
C162C108C191
C111
C119
CB120
U15
TP62TP15
U37
L1
F1
C176
U27
U26R11
R184
R40
R186R185R17R15
R177
L7
L5
F2
C23
CT199
CS26
C207
C135
C128
C132 C133CB31
CB71CB81
CB91C131
C76 C177C122
FAN1
J10J5
U8
U9
U2
JP3
J11
U4
U1
SDB
UA
RTM
DIO
J9DJ9CJ9BJ9A
Port A Expander 1
Port B Expander 2
IMPORTANT: See Section 3-3 of this manual, Failover with RAID Cards and Multiple HBAsforimportantinformationonsupportedconfigurations.
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
J9A
J9B
J9C
J9D
3-13
Chapter 3 Dual Port and Cascading Configurations
Notes
3-14
BPN-SAS3-216EL1/EL2 Backplane User's Guide
Disclaimer (cont.)The products sold by Supermicro are not intended for and will not be used in life sup-port systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to per-formbereasonablyexpectedtoresultinsignificantinjuryorlossoflifeorcatastrophicproperty damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale.