bpf distibutors & pumps ltd
DESCRIPTION
Vaughan Chopper PumpsTRANSCRIPT
![Page 1: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/1.jpg)
Presented by:
Email: [email protected] or [email protected]
Mobile: 0044 (0) 7501 483470
www.bpf-ltd.com
A Unique Solution To Common Problems
![Page 2: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/2.jpg)
WARNINGThe Vaughan ‘Chopper’ Pumps & Tank Mixing Systems will,
Dramatically Increase Your Equipment Efficiency
Dramatically Reduce Operational Costs
Eliminate Blockage & Ragging Problems
Dramatically Reduce Motor Overload Conditions
Offer ‘Guaranteed’ Returns On Your Investment
Positively Affect The Bottom Line Of Your Business
Reduce Your C02 Emissions & Carbon Footprint
Solving Problems Saves Money & Reduces C02 Emissions
ENTER AT YOUR OWN RISK!!
![Page 3: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/3.jpg)
The Increasing Operational Challenges
Regular call outs dealing with blocked pumps.
Expensive overheads for callouts.
Lack of resources to deal with regular problems.
High energy bills.
Additional administration and associated costs.
Management of equipment that doesn't work.
Actively looking for efficiency savings.
Operational budget cut backs.
Increasing Targets & Objectives.
£
![Page 4: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/4.jpg)
Standard Sewage?
What Are You Pumping?
![Page 5: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/5.jpg)
What Else Are You Pumping?
More Standard Sewage?
![Page 6: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/6.jpg)
Frequent & Premature Equipment Failures
How does The Vaughan ‘Chopper’ Pump deal with all
of these problem areas that no-one else can handle?
Plugging at the suction intake.
Binding of materials around the impeller
Abrasives which rapidly wear standard materials
(Grit, Stones, Gravel)
Reweave of materials behind impeller
Shaft deflection and vibration when handling solids.
Approximately 22-24% of submersible pumps failures are associated with
Reweave of material behind the impeller & Shaft deflection.
Approximately 22-24% of submersible pumps failures are associated with
Reweave of material behind the impeller & Shaft deflection.
![Page 7: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/7.jpg)
Other Manufacturers ‘Non-Clog’ Type Pumps Can’t Handle This Heavy Duty Environment.
Plugging - A Familiar Sight?
![Page 8: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/8.jpg)
A Blocked SewerSimilar to many sites throughout Northern Ireland, course hand rake screens had been installed at multiple SPS’s and were a constant drain on the NIW recourses. The objective was to remove the hand rake screens and thus remove the operational costs which typically consisted of:
• 1 operator - 5 days per week to manually rake the material into a bin.
• 1 lorry – at least 1 day per week to empty the bins.
This task will easily amount to an annual cost of over £3000 the addition
of any further costs arising from pump failures, repairs, sump tankering
etc which would be added to the base figure.
What would happen if the screens were removed? there would be premature failure to the existing standard Non-clog type pumps unless, they upgraded to the equipment designed for this duty, The Vaughan ‘Chopper’ Pumps
It is policy within many water authorities not to fit screens upfront to protect equipment. However, it is commonly accepted as a compromise over consistent and frequent failures of low cost and poor design of pumps.
The cost implications of this are substantial!!
![Page 9: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/9.jpg)
Rags & Debris result in regular & costly failures to
Other Manufacturers ‘Non Clog’?? Equipment
Rags & Plastics Cause Plugging, Binding &
Weaving of your equipment, resulting in
premature Failure!!
![Page 10: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/10.jpg)
Premature Failure of Standard cast iron Impeller worn after a few weeks of operation
Standard Pumping Equipment is manufactured from low cost materials such as Cast Iron which cannot handle:
Grit, Stones & Other Abrasives.
GRIT causes regular & costly failures to
Other Manufacturers ‘Non Clog’?? Equipment
![Page 11: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/11.jpg)
Motor Overload Conditions
Result in regular & Costly failures.
Shaft Deflection & Vibration causes
Seal Failures
Bearing Failure Motor Failures
Inadequate Designs cannot cope with Heavy
Duty Requirement.
![Page 12: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/12.jpg)
Motor Overload Conditions
Result in regular & Costly failures.
Reweave of fibres behind the impeller results in:
Seal Failures
Bearing Failure
Inadequate Designs cannot cope with the Heavy Duty Requirement.
MOTOR FAILURES!!
![Page 13: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/13.jpg)
Common Myth
All ‘Non-Clog’ or ‘Macerator’ or Cutter type
pumps are the same!
FALSE
Vaughan ‘Chopper’ Pumps are not to be confused with
other types or brands of chopper pumps, macerators,
grinder or cutter pumps.
The Vaughan Pump is a patented product and so it is
UNIQUE in the pump world.
![Page 14: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/14.jpg)
‘Chopper’ Pumps & Sludge Mixing Systems
Horizontal End Suction
Available Configurations
Electric Hydraulic Self Priming PedestalSubmersible Submersible Dry Well
![Page 15: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/15.jpg)
‘Chopper’ Pumps & Sludge Mixing Systems
Features & Benefits
As The Vaughan ‘Chopper’ Pump is:
Solution & NOT Cost Driven, What Technical Advantages does this bring?
Take a Closer Look
The Attention To Detail vs. Others
![Page 16: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/16.jpg)
The ONLY pump on the market designed from the ‘Inside to out’
As a ‘Chopper’
The Vaughan ‘Chopper’ has the unique ability to handle heavy Solids & Debris laden duties where all other equipment fails.
Guaranteed!!!
![Page 17: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/17.jpg)
Highly Efficient Impeller Design
This Unique Patented design integrates Pumping and Chopping into ONE efficient system.
The CHOPPING is done right where the pumping is done.
Increased efficiency
reduces energy usage and
lowers electricity bills.
Increased efficiency
reduces energy usage and
lowers electricity bills.
![Page 18: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/18.jpg)
v
Why is the Vaughan ‘Chopper’ Pump
Impeller design so efficient?
The Chopping action occurs as close to the most central part of the shaft rotation possible. This requires less energy even with the toughest materials.
Solids above 10mm
Solids below 10mm
Solids below 10mm are chopped in this new improved design with the new cutter nut tooth's leading edge scissor action design
![Page 19: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/19.jpg)
Field adjustment with:
NO special tool or shims necessary!
The E-series design incorporates a unique back pull-out plate with external adjustments of all critical cutting clearances.
![Page 20: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/20.jpg)
The ONLY pump available with ALL wear components in hardened materials
• All Wear Components – 61-64 Rockwell C (min 60)
• 4 times harder than standard grey iron.
• Designed to withstand impact.
• Designed to withstand abrasion.
• Minimal spares required over 20 years
NO OTHER PUMP O.E.M OFFERS THIS!
As Standard
Built to last
![Page 21: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/21.jpg)
Flared Bore intake
Vaughan offers 140mm as the smallest intake.
Allows the solids to get right to the intake chopping action without obstruction.
Others offer 50mm which block the intake
140mm
Flared Bore
![Page 22: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/22.jpg)
Unique Cutter Nut
Vaughan ‘Chopper’ Pumps
Cutter Nut
Eliminates Plugging
![Page 23: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/23.jpg)
Double Cutter Bar System
Extends across the intake
Chopping Action
![Page 24: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/24.jpg)
V-Notch Shear Plate Cutter
‘V’ - Disintegrator
The sharpened leading edge ensures the debris is effectively broken down with minimal effort.
![Page 25: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/25.jpg)
Patented Cutter Bar Shear Plate
Rear Scissor Edge Action
For The Rogue Materials & Stubborn Baby Wipes
![Page 26: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/26.jpg)
Cup Shaped Chopping Impeller blades
Machined edges slice the material against the back of the shear plate as it enters. The semi-open impeller clears it quickly and efficiently.
![Page 27: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/27.jpg)
Scissor Action Chopping
LARGE SOLIDS AND DEBRIS CHOPPED BY SCISSOR ACTION
![Page 28: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/28.jpg)
THIS IS NOT A CHOPPING
IMPELLER DESIGN
IT DOES NOT CHOP!!
According to the experts in Blade Technology
THE MOST EFFICIENT CHOPPING
IMPELLER DESIGN AVAILABLE
Others
Vaughan Others
![Page 29: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/29.jpg)
Upper Cutter Ring
The Vaughan ‘Chopper’ Pump eliminates material REWEAVE behind impeller. The biggest killer of mechanical seals in submersible pumps. This problem also causes bearing failure and motor overload conditions.
![Page 30: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/30.jpg)
Heavy Duty Mechanical Seal
Vaughan Cartridge Seal
A unique design built to withstand the rigours of chopping.
The main sealing faces are protected from the process with the new shrouded design.
Large oil bath chamber allows the seal to
‘dry-run’
![Page 31: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/31.jpg)
Vaughan - No Compromise SHAFT Design
Benefits
Extended and Reliable performance of your equipment
Oversized Shaft
Lowest shaft overhang
Minimal Shaft deflection
Features
Performance Guaranteed
![Page 32: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/32.jpg)
Heavy Duty Shaft
Vaughan Minimum Shaft size 1.750” (45mm)
Compared to Competitors: 20mm, 25mm, 30mm, 35mm
![Page 33: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/33.jpg)
Withstands the rigours of Combined Chopping & Pumping high solids content slurries.
Oversized and designed for severe use.
Angular contact ball bearings for high thrust loadings
All of this simply means…….
….Longer Life and Reduced Maintenance
Oversized Seal-and-Bearing System
![Page 34: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/34.jpg)
A Comparison to Other Manufacturers?
Standard ‘Non-Clog’? Type Pumps
There can be no comparisons made between
Vaughan and other types of equipment.
![Page 35: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/35.jpg)
Other Manufacturers Lightweight Bearing Systems
All have Single Thrust on top
All have small shaft diameters Most commonly
20mm to 35mm
All have Light Dutylower double Radial bearings
![Page 36: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/36.jpg)
Other Manufacturers Lightweight Bearing Systems
All have Single Thrust on top
All have small shaft diameters Most commonly
20mm to 35mm
All have Light Dutylower double Radial bearings
NONE OF THESE DESIGNS WILL COPE WITH A HEAVY
SHOCK LOADING
![Page 37: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/37.jpg)
All other Non-Clog? type pumps are basically a Centrifugal type with something added on: i.e.
Cutter Bar, Knife-edge, Grooves
NOT SUITABLE FOR HEAVY DUTIES
![Page 38: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/38.jpg)
Other Manufacturers’ Mechanical Seals
LIGHT DUTY designs are no match for Vaughan
NO COMPARISON!NO COMPARISON!
![Page 39: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/39.jpg)
SHAFT DEFLECTION
The main chopping action takes place between
the Auger-type impeller edge and the machined grooves on the I/D of the flange
Cutting Action takes place on the outer edge of impeller. This creates excessive radial forces to
the shaft causing deflection with resultant Mechanical Seal & Bearing failure.
![Page 40: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/40.jpg)
How Confident Are We?
You will never see
anything like this from other Pump MANUFACTURERS!
The Vaughan Non-Clog Guarantee
With almost 20,000 units in service, the Vaughan Chopper Pump has not only proven it’s value in problem solving, but also established itself as the reliable alternative to conventional pumping. Over the years, product reliability has also allowed Vaughan to guarantee the NON-CLOG performance of all chopper pumps. This guarantee is your written assurance of clog-free solids-handling performance, above-and-beyond the standard materials-and-workmanship warranty. Below is a sample guarantee so you can see how simple and
direct Vaughan's guarantee reads — no "catch phrases" or vague
requirements.
Vaughan Co., Inc. Performance Guarantee statement:
Vaughan guarantees to ____________ the NON-CLOG performance of
the model ________ chopper pump to pump _______ without plugging
for the duration of the warranty period, based on the following
conditions:
Terms ……………………
![Page 41: BPF Distibutors & Pumps Ltd](https://reader031.vdocuments.us/reader031/viewer/2022020308/568bd7bc1a28ab2034a0ca43/html5/thumbnails/41.jpg)
The Vaughan ‘Chopper’ Pump Demo Trailer