books10 extrusion

Books on Plastic Extrusion

ISBN: 9781569903216 Author: Chris Rauwendaal Published: 2001 List Price: $99.95

Delegate Price: 70 US$ (before 31 Jan 10) Delegate Price : 80 US$ (before 20 Feb 10)

Book Collection : at the conference desk (30 March 10 between 09.00 to 12.00 hrs )

Polymer Extrusion

This bestseller examines the min components of extruders used for processing thermoplastics, including drives, reducers, bearings, screws, dies, screens, heating and cooling systems, and instrumentation and control. Basic principles, polymer properties, applications, and analysis of processes are presented. Contents: Introduction. Different Types of Extruders; Extruder Hardware; Instrumentation and Control; Fundamental Principles. Important Polymer Properties; Functional Process Analysis; Extruder Screw Design; Die Design; Twin Screw Extruders; Troubleshooting Extruders; Modeling and Simulation of the Extrusion Process.

Troubleshooting the Extrusion Process

This is the first book of its kind to address all issues crucial in extrusion troubleshooting, including industrial case studies. These case studies provide exemplary approaches to efficient problem analysis and problem solving. The book discusses the main categories of problems and helps the reader to develop a systematic and methodical approach to solving extrusion problems. The use of flow- and fishbone-charts allows for systematic troubleshooting. Contents: Requirements for Efficient Troubleshooting; Tools for Troubleshooting; Systematic Troubleshooting; Case Studies: Film Coextrusion; Degradation in the Middle Layer; Film Coextrusion with Interfacial Problems; Lines in Extruded Film; Color Variation in Fibers; Film with Poor Transparency; Wear Problem in Film Extrusion; Multilayer Film with Appearance Problems; Dispersion Problem in HDPE Bottles; Polymer Degradation; Heat Sealing Problems in Coextruded Film; Output Problem in Blown Film Line; Master Batch Selection; Pipe Extrusion Problems; Systematic Problem Solving; Machine Troubleshooting and Maintenance.

ISBN: 9781569903209 Authors: Maria Noriega & Chris Rauwendaal Published: 2001 Price: $89.95



ISBN: 9781569903964 Author: Kirk Cantor Published: 2006 Price: $89.95



Blown Film Extrusion From hardware and materials through processing and properties, this book presents a broad coverage of blown film extrusion and ensures a useful balance of theory and practice. This book explains certain effects in the blown film process so readers are better able to troubleshoot and improve their operations. Also, current practices and equipment are emphasized to keep readers up-to-date with the most productive and efficient technology. Companion CD: The Blown Film Extrusion Simulator enhances the learning process. This software was developed to teach blown film extrusion equipment operation and processing principles. The realistic graphic interface and intuitive operating techniques were designed to emulate processing methods so learners can quickly move from the simulator to real production equipment. Contents: Materials for Blown Film; Extrusion Overview; Hardware for Blown Film; Processing; Co-extrusion; Film Properties; Troubleshooting; The Blown Film Extrusion Simulator; Useful Equations.

Extrusion of Polymers - Theory and Practice Single-screw extrusion technology is presented together with the relevant polymer fundamentals, with an emphasis on screw design. This book begins on a physical level providing an in-depth tutorial for conceptual understanding, followed by an analytical level with mathematical models. Practical applications of the mathematical models are illustrated by examples. A brief description of twin-screw extrusion technology is also presented. Contents: Physical Description of Single-Screw Extrusion; Fundamentals of Polymers; Theories of Single-Screw Extrusion; Screw Design, High-Performance Screws, and Scale-Up; Gear Pumps, Static Mixer, and Dynamic Mixer; Physical Description of Twin-Screw Extruders.

ISBN: 9781569902882 Author: C. Chung Published: 2000 Price: $99.95



ISBN: 9781569902257 Author: F. Hensen Published: 1997 Price: $199.95



Screw Extrusion This book emphasizes the understanding of the underlying principles of screw extrusion and helps the engineer to optimize his equipment and enhance production rates and properties of synthetic polymers. Reaching these goals is dependent on optimum screw design to provide homogeneous melts for successful post processing, such as fiber spinning, blown film, cast film, and sheets. Contents: Fundamentals; Screw Extrusion Technology; Technology of Single Screw Extrusion with Reciprocating Screws; Single Screw Extruder Analysis and Design; Twin and Multiscrew Extrusion.

ISBN: 9781569903179 Author: J. White H. Potente Published: 2003 Price: $149.95



Plastics Extrusion Technology Now updated, this industry standard provides information on the as-pects and processes of extrusion technology, including design, con-struction, and operation of extrusion lines. Well-known experts in various fields of extrusion have contributed to this book. As a reference book it will undoubtedly prove a considerable benefit to engineers involved with the extrusion process. Contents: Compounding Lines; Extrusion of Pipes, Profiles, and Cables; Blown Films; Blown Film Coextrusion; Flat Film Extrusion Using Chill-Roll Casting; Production of Films and Sheets by the Roll-Stack Process; Manufacture of Oriented Films; Film Tapes; Monofilament Extrusion; Extrusion Coating and Laminating; Extrusion of Foamed Intermediate Products with Single-Screw Extruders; Foamed Semifinished Products with Twin-Screw Extruders; Extrusion of Elastomers; Fiber Extrusion. Ram Extrusion of PTFE and UHMWPE. Feeding of Extruders; Extrusion Recycling of Waste.

Co-Rotating Twin-Screw Extruders Co-rotating screws are used in many branches of industry for producing, pre-paring and/or processing highly viscous materials. They find a wide variety of applications especially in the plastics, rubber and food industries. Co-rotating twin-screw machines usually have modular configurations and are thus quite flexible for adapting to changing tasks and material properties. Well-founded knowledge of machines, processes and ma-terial behavior are required in order to design twin-screw extruder for economically successful operations. This book provides basic engineering knowledge regarding twin-screw ma-chines; it lists the most important machine-technical requirements and pro-vides examples based on actual practice. Better understanding of the proc-esses is emphasized as this is a prerequisite for optimizing twin-screw designs and operating them efficiently. Besides basic functions, such as compounding, the book focuses on the historical development of twin-screws, the geometry of the screw elements (fundamentals, basic patents, patents overview), material properties and ma-terial behavior in the machine, fundamentals of feed behavior, pressure build-up and power input, examples of applications for various processing tasks, compounding: tasks, applications, processing zones, potential and limits of modeling, scaling-up various processes, and machine design including drives and materials.

ISBN: 9781569904220 Author: K. Kohlgrüber Published: 2007 Price: $99.95 Delegate Price: 70 US$ (before 31 Jan 10)

Delegate Price : 80 US$ (before 20 Feb 10) Book Collection : at the conference desk (30 March 10 between 09.00 to 12.00 hrs )

Extrusion Dies for Plastics and Rubber

This edition of this well-received book provides a comprehensive account of the full range of dies used for extrusion of plastics and elastomers. The distinctive features of the various types of dies are described in detail. Advice on the configuration of dies is given, and the possibilities of computer-aided design, as well as its limitations, are demon-strated. The fundamentals and computational procedures are well explained so that the reader does not need any special prior knowledge of the subject. The mechanical con-figuration, handling, and maintenance of extrusion dies are described. Calibration proce-dures for pipes and profiles are also dealt with. This book was written for plastics engi-neers who need daily support in their practical work in industry and science as well for students preparing for their professional life.

Contents: Properties of Polymeric Melts; Fundamental Equations for Simple Flows; Computations of Velocity and Temperature Distributions in Extrusion Dies; Monoextru-sion Dies for Thermoplastics; Coextrusion Dies for Thermoplastics; Extrusion Dies for Elastomers; Heating of Extrusion Dies; Mechanical Design of Extrusion Dies; Handling, Cleaning and Maintaining Extrusion Dies; Calibration of Pipes and Profiles.

ISBN: 9781569903490 Author: W. Michaeli Published: 2003 Price: $99.95



Books on Plastic Extrusion

BOOK ORDER FORM

We would like to order

� Polymer Extrusion � Troubleshooting Extrusion

� Blown Film Extrusion � Extrusion of Polymers

� Plastics Extrusion Technology � Screw Extrusion

� Co-Rotating Twin Screw � Extrusion Dies

Company Name …………………………………………………………………………………………………………

Address …………………………………………………………………………………………………………………….

………………………………………………………………………………………………………………………………….

Tel…………………………………………………… Fax…………………………………………………………………

Email……………………………………………….. Website…………………………………………………………..

Contact Person ……………………………………….. Email……………………………………………………….

Payment Method (by Credit Card Only) (5% Credit Card processing fee applies)

Card Type � Visa � Master

Card Number ………………………………………………………………………………………………………………………………

Card Holder Name ………………………………………………………………………………………………………………………

Bank Name ………………………………………………………………………………………………………………………………….

Last 3 digits on card signature panel ………………………………….. Card Expiry Date……………………………

Signature ……………………………………………………………………………. Date……………………………………………..

For more information

Conference Manager, Plastic Extrusion Asia 2010 TechnoBiz Communications Co., Ltd.

300/53, Soi Lardprao 35/1, Lardprao Road, Chandrakasem, Chatuchak, Bangkok 10900 Thailand Tel: 66-2-938 2315 Fax: 66-2-513 1301 Email: [email protected]

books10 extrusion

Documents