bonnell industries bjv-series v-box...

Bonnell Industries

815.284.3819

BJV-SERIESV-BOX SPREADERS

No job is too big for the BJV. It is the ‘Junior’ model V-Box, and this small but

mighty V-Box can handle any salt-spreading application you put it through. If

your truck can handle the load, the BJV can handle the rest. Bonnell offers the

BJV Series V-Box Spreader for smaller trucks. The BJV units are available in 7’

or 8’ lengths in either carbon or stainless steel. You have your choice of either

hydraulic drive or power supplied by a 10.5 hp I/C engine with an electric

starter, electric clutch and electric throttle - all controlled from the comfort of

your cab. Top screens and an inverted “V” are standard features with the BJV.

If you are looking for a unit that offers durability, efficiency, reliability and the

quality you need at a price you can afford, look no further than Bonnell.

S T A N D A R D F E A T U R E S

• One piece Hopper Sides and Long Sills welded continuously (inside)

• 20:1 Gear Box on engine driven units, 1.25” drive shaft

• Stainless engine hood & spinner assembly - standard equipment on carbon steel or stainless steel units

• Available in carbon steel or stainless steel

• Wireless remote controller

BJV-834-E SHOWN

Bonnell Industries

815.284.3819

• Dump Body Mount Kit • Carbon Steel Tailgate Latch Kit• Control Valve• Chain Oiler• Short Hose Kit• Honda 11HP Engine • 8’ Hopper Tarp• Electric Drive

“BJV” Series V-Box Specifications Options:

CARBON STEEL BODYBody is constructed of 14-gauge car-bon steel with 45 degree sloping sides. Hopper body measures approximately 50”W x 34”H. Ends are constructed of 14-gauge carbon steel and the floor is replaceable 14-gauge carbon steel. Each unit comes complete with a steel feedgate, which is adjustable by a lever with a threaded locking knob.

STAINLESS STEEL BODYAll BJV “S3” Model spreaders are con-structed from 14 gauge stainless steel sides and ends, 45° sloping sides. Hopper body measures approx. 50” width x 34” height, 14 gauge stainless replaceable floor, feed gate, inverted-v, engine hood, and spinner assembly are also construct-ed of stainless steel. The spinner disc is 13” poly. All stainless steel is unpainted. Most options and bolt-on items are carbon steel and painted black.

CONVEYORThe 16” wide conveyor chain is made of heat-treated, self-cleaning pintle chain with crossbars welded every 9” on cen-ters. Crossbars are welded on both top and bottom and are 1/4” thick x 1” wide. On engine driven units, the conveyor is driven by a 20:1 reduction gearbox and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pat-tern. Hydraulic units have a direct drive conveyor. Two screws, with a minimum of

4” of travel to maintain proper conveyor tension, are standard.

SPINNER ASSEMBLYSpinner assembly comes with a 13” poly spinner disc, two internal directional baffles and four external baffles. One external baffle is fixed and three are ad-justable, and are removeable without the use of tools. 18” spinner chute, baffles, and engine hood are made of stainless steel. Chute and engine hood shall be unpainted.

TOP SCREENSingle piece top screen made from 1/4” woven wire, square openings of 2-3/4” and framed by angle iron and flat bars.

REMOTE CONTROLLERHandheld remote controller is standard.

CU. YD. APPROX. MODEL NO. LENGTH HEIGHT DRIVE BODY CAPACITY WEIGHT BJV-834-E 8’ 34” Engine Carbon Steel 2.0 1,000 LBS. BJV-834-ES3 8’ 34” Engine Stainless Steel 2.0 1,000 LBS.

BJV-834-H 8’ 34” Hydraulic Carbon Steel 2.0 860 LBS. BJV-834-HS3 8’ 34” Hydraulic Stainless Steel 2.0 860 LBS.

Bonnell Industries reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifications used herein. © 2006 Bonnell Industries, Inc.

1385 Franklin Grove Rd. • Dixon, IL 61021 • www.bonnell.com(815) 284-3819 • (800) 851-9664 • Fax (815) 284-8815

Bonnell Industries

815.284.3819

BMV-SERIESV-BOX SPREADERS

Getting the job done fast and efficiently is important to you and

it’s important to us. Down time is not an option. That’s why, at

Bonnell, we are constantly finding ways to improve products to

fit our customer’s specific needs. Bonnell now offers a BMV

Series V-Box Spreader for mid-size trucks. The BMV units are

available in 8’, 9’, and 10’ lengths in either carbon or stainless steel.

You have your choice of either hydraulic drive or power supplied

by a 10hp I/C engine with an electric starter, electric clutch

and electric throttle - all controlled from the comfort of your cab.

Top screens and an inverted “V” are standard features with the

BMV. If you are looking for a unit that offers durability, efficiency,

reliability and the quality you need at a price you can afford, look

no further than Bonnell.


• One piece Hopper Sides and Long Sills welded continuously (inside)

• 25:1 Gear Box, 1.25” drive shaft and 6 Tooth sprockets are provided for a more even distribu-tion of material and longer drag chain life

• Stainless engine hood & swing-up spinner as-sembly standard equipment on carbon steel or stainless steel units

• Available in Carbon or Stainless Steel

• Wireless remote controller

BMV-1044-H SHOWN

Bonnell Industries

815.284.3819

• BMV Hold Down• Carbon Steel Tailgate Latch Kit• Control Valve• Chain Oiler• Short Hose Kit• Honda 11HP Engine• Paint options available• Auger Feed

“BMV” Series V-Box Specifications Options: CU. YD. APPROX. MODEL NO. LENGTH HEIGHT WIDTH DRIVE BODY CAPACITY WEIGHT BMV-840-E 8’ 40” 70” Engine Carbon Steel 3.0 1,190 LBS. BMV-840-ES3 8’ 40” 70” Engine Stainless Steel 3.0 1,190 LBS. BMV-944-E 9’ 44” 70” Engine Carbon Steel 4.0 1,425 LBS. BMV-944-ES3 9’ 44” 70” Engine Stainless Steel 4.0 1,425 LBS. BMV-1044-E 10’ 44” 70” Engine Carbon Steel 4.5 1,574 LBS. BMV-1044-ES3 10’ 44” 70” Engine Stainless Steel 4.5 1,574 LBS.

BMV-840-H 8’ 40” 70” Hydraulic Carbon Steel 3.0 1,021 LBS. BMV-840-HS3 8’ 40” 70” Hydraulic Stainless Steel 3.0 1,021 LBS. BMV-944-H 9’ 44” 70” Hydraulic Carbon Steel 4.0 1,264 LBS. BMV-944-HS3 9’ 44” 70” Hydraulic Stainless Steel 4.0 1,264 LBS. BMV-1044-H 10’ 44” 70” Hydraulic Carbon Steel 4.5 1,425 LBS. BMV-1044-HS3 10’ 44” 70” Hydraulic Stainless Steel 4.5 1,425 LBS.

CARBON STEEL BODYBody is constructed of 12 gauge carbon steel with 45 degree sloping sides. Hopper body measures approximately 70”W x 40” or 44”H. Ends are constructed of 14 gauge carbon steel and the floor is replaceable 10 gauge carbon steel. Each unit comes com-plete with a steel feedgate, which is adjustable by a lever with a threaded locking know.

STAINLESS STEEL BODYAll BMV “S3” Model spreaders are con-structed from 12 gauge stainless steel sides and ends, 45° sloping sides. Hopper body measures approx. 70”w x 40” or 44”h. 10 gauge stainless replaceable floor, feed gate, inverted-v, engine hood, and spinner assembly are also constructed of stainless steel. The spinner disc is 13” poly. All stainless steel is unpainted. Most options and bolt-on items are carbons steel and painted black.

CONVEYORThe 16” wide conveyor chain is made of heat-treated, self-cleaning pintle chain with crossbars welded every 9” on centers. Crossbars are welded on both top and bottom and are 1/4” thick x 1” wide. The conveyor gearbox is a 20:1 reduction and is a bronze worm-gear type having a cast iron housing with a ring-mounted bolt pattern. Spring loaded take-up idler shaft. Two spring-loaded adjustment screws, with a minimum of 4” of travel to maintain proper conveyor tension, are standard.SWING-UP SPINNER ASSEMBLY

Swing up spinner assembly comes with a 13” poly spinner disc, one internal directional baffle and four external baffles. One external baffle is fixed and three are adjustable, and are remove-able without the use of tools. 18” spinner chute, baffles, and engine hood are made of stainless steel. Chute and engine hood shall be unpainted.

TOP SCREENSSection top screens are made of 5/16” rods, with square openings of 2 1/2”, framed by flat bars and angle iron steel. Screens are painted black.

REMOTE CONTROLLERHandheld remote controller is standard.



Bonnell Industries

815.284.3819

BV-SERIESV-BOX SPREADERS

The Bonnell “BV” Series V-Box Spreader is the largest series of V-Box spreaders offered by Bonnell Industries. Units are available in 9-15’ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability. Bonnell has carried on another tradition by putting the same quali-ty you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night. The Bonnell “BV” Series V-Box gives you comfort in knowing you are going to get the job done fast and efficiently. Standard

features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets. 8 Tooth sprockets are provided for a longer drag chain life. A spring-loaded conveyor chain ensures proper tension at all times. Swing up spinner assembly with 18” steel spinner disc also included. More standard features and specifications listed on back. Optional equipment and upgrades also available. Call Bonnell today to order your BV Series V-Box Spreader and rest assured knowing you have purchased a dependable product that will get you through many winters to come.


• 10-Gauge Hopper Sides (“CS” Carbon)7-Gauge Long-sills

• 12-Gauge Hopper Sides (“SS” Stainless)10-Gauge Longsills

• 50:1 Gear Box, 1.5” drive-shaft and8 Tooth sprockets are provided for a longer drag chain life

• Top Screens

• Swing-up Spinner with 18” Steel Spinner Disc

BV-1056-S3 SHOWN

Bonnell Industries

815.284.3819

“BV” Series Spreader Specifications Options:

CARBON STEEL BODYConstructed of 10-gauge steel with 45º sloping sides with 10-gauge side sup-ports and 7-gauge longsills. Each unit comes complete with a 12" x 18" steel feedgate, which is adjustable by means of a screw type jack that is self locking, and is assembled with all stainless steel internal parts.

STAINLESS STEEL BODYConstructed of 12-gauge steel with 45º sloping sides with 12-gauge side supports and 10 gauge longsills. Heavier gauges available. CONVEYORThe 24" wide conveyor chain is made of heat-treated, self-cleaning pintle chain with cross bars welded every 4-1/2”. The conveyor gearbox is a 50:1 reduction and is a bronze worm-gear type having a cast

iron housing with a ring-mounted bolt pattern. Drive and idler shafts are 1-1/2" with 8 tooth drop forged sprockets, and are mounted in sealed anti-friction bearings. Two spring-loaded adjustment screws, with a minimum of 4" of travel to maintain proper conveyor tension are standard.

SPINNER ASSEMBLYSwing up assembly with 18" steel spinner disc, one internal directional baffle and four external baffles - one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENSSection top screens are made of 3/8" diameter rods welded to a 1/4" x 2" angle iron frame creating a maximum opening of 2-1/2."

CAB TO CU. YD. APPROX. MODEL NO. LENGTH HEIGHT AXLE CAPACITY WEIGHT BV-9-50 9' 50" 72" 4.9 2,075 LBS BV-9-56 9' 56" 72" 6.0 2,160 LBS BV-9-62 9' 62" 72" 7.1 2,245 LBS BV-10-50 10' 50" 84" 5.5 2,385 LBS BV-10-56 10' 56" 84" 6.7 2,480 LBS BV-10-62 10' 62" 84" 7.9 2,575 LBS BV-11-50 11' 50" 96" 6.1 2,525 LBS BV-11-56 11' 56" 96" 7.4 2,625 LBS BV-11-62 11' 62" 96" 8.7 2,725 LBS BV-12-50 12' 50" 108" 6.6 2,695 LBS BV-12-56 12' 56" 108" 8.1 2,800 LBS BV-12-62 12' 62" 108" 9.5 2,905 LBS BV-13-50 13' 50" 96" C.T. 7.0 2,835 LBS BV-13-56 13' 56" 96" C.T. 8.6 2,945 LBS BV-13-62 13' 62" 96" C.T. 10.4 3,055 LBS BV-14-50 14' 50" 108" C.T. 7.8 3,005 LBS BV-14-56 14' 56" 108" C.T. 9.5 3,120 LBS BV-14-62 14' 62" 108" C.T. 11.2 3,235 LBS BV-15-50 15' 50" 120" C.T. 8.3 3,145 LBS BV-15-56 15' 56" 120" C.T. 10.2 3,265 LBS BV-15-62 15' 62" 120" C.T. 12.0 3,385 LBS



• 10-Gauge stainless steel V-box construction • Sloping front• Auger feed • Observation platform• 20" poly spinner • Cabshield

• Grease extension to rear • Catwalks • Light kits• Winch for spinner

• Mounting kits• Inverted V • Pre-wet systems• Chain oiler

Not Shown • Belt over conveyor chain• Engine over hydraulic systems • Rear Diverter• Top Mount Spinner Motor

Bonnell Industries

815.284.3819

BVA-SERIESV-BOX SPREADERS


The Bonnell “BVA” Auger Bottom Series V-Box Spreader units are available in 9-15’ lengths and constructed of 10-Gauge carbon or 12-Gauge stainless steel for durability.

Bonnell has carried on another tradition by put-ting the same quality you have come to know and trust into our V-Box spreaders. We know that you need a product you can depend on when you are out fighting the winter weather day and night.

The Bonnell “BVA” Series V-Box gives you com-fort in knowing you are going to get the job done fast and efficiently. Standard features include 10-Gauge hopper solid welded on the inside for added strength and to prevent rust pockets.

Spreader includes a side swing up spinner assembly with 18” steel spinner disc.

More standard features and specifications listed on back. Optional equipment and upgrades also available. Call Bonnell today to order your BVA Series V-Box Spreader and rest assured know-ing you have purchased a dependable product that will get you through many winters to come.

• 10-Gauge Hopper Sides, 7-Gauge Longsills, 7-Gauge Auger Trough (“CS” Carbon) • 12-Gauge Hopper Sides, 10-Gauge Longsills, 10-Gauge Auger Trough (“SS” Stainless)

• 7” diameter hard surface auger with three pitch settings for even unloading, four bolt self aligning ball bearing at front of auger, greasable from the rear of spreader

• Direct drive motor

• Side Swing-up Spinner with 18” Steel Spinner Disc

• Inverted V - standard

• Top Screens - standard

BVA-1360- SHOWN

Bonnell Industries

815.284.3819

• 12-gauge stainless steel v-box construction (optional 10-gauge stainless) • doghouse cutout for dump body hoist • mounting kits• catwalks • ladders• cabshield • pre-wet systems • engine over hydraulic systems• 20” poly spinner• Hand crank winch for swing up spinner

“BVA” Series Spreader Specifications Options:

CARBON STEEL BODYConstructed of 10 gauge steel with 45º sloping sides with 10 gauge side supports for high resistance to twisting under heavy loads. AUGER7” Hard faced auger with direct drive.

SPINNER ASSEMBLYSwing up assembly with 18" steel spinner disc, one internal directional baffle and four external baffles - one fixed and three adjustable, which are removable without the use of tools.

TOP SCREENSSection top screens are made of 3/8" diameter rods welded to a 1/4" x 2" angle iron frame creating a maximum opening of 2-1/2."

INVERTED VStandard equipment with the purchase of BVA spreader.

GREASE EXTENSIONGrease extension to the rear - standard equipment.

MAX AUGER CAB TO CU. YD. APPROX. MODEL NO. LENGTH LENGTH HEIGHT AXLE CAPACITY WEIGHT BVA-9-48 9' 9’ 48" 72" 5.1 2,075 LBS BVA-9-54 9' 9’ 54" 72" 6.2 2,160 LBS BVA-9-60 9' 9’ 60" 72" 7.4 2,245 LBS BVA-10-48 10' 10’ 48" 84" 5.6 2,385 LBS BVA-10-54 10' 10’ 54" 84" 6.9 2,480 LBS BVA-10-60 10' 10’ 60" 84" 8.3 2,575 LBS BVA-11-48 11' 11’ 48" 96" 6.2 2,525 LBS BVA-11-54 11' 11’ 54" 96" 7.6 2,625 LBS BVA-11-60 11' 11’ 60" 96" 9.0 2,725 LBS BVA-12-48 12' 12’ 48" 108" 6.8 2,695 LBS BVA-12-54 12' 12’ 54" 108" 8.4 2,800 LBS BVA-12-60 12' 12’ 60" 108" 9.9 2,905 LBS BVA-13-48 13' 12’ 48" 96" C.T. 7.3 2,835 LBS BVA-13-54 13' 12’ 54" 96" C.T. 9.0 2,945 LBS BVA-13-60 13' 12’ 60" 96" C.T. 10.7 3,055 LBS BVA-14-48 14' 12’ 48" 108" C.T. 7.9 3,005 LBS BVA-14-54 14' 12’ 54" 108" C.T. 9.7 3,120 LBS BVA-14-60 14' 12’ 60" 108" C.T. 11.6 3,235 LBS BVA-15-48 15' 12’ 48" 120" C.T. 8.4 3,145 LBS BVA-15-54 15' 12’ 54" 120" C.T. 10.3 3,265 LBS BVA-15-60 15' 12’ 60" 120" C.T. 12.2 3,385 LBS



bonnell industries bjv-series v-box...

Documents