board mounted valances custom workroom/4_valances.pdf · 1) straight bottom valances can be either...
TRANSCRIPT
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
VALANCES
PINCH PLEATED VALANCES
ROD POCKET VALANCES
ROD SLEEVES
BOARD MOUNTED VALANCES
TAB VALANCES
UPHOLSTERED SOFT VALANCES
CORNICES
LAMBREQUINS
SUNBURSTS
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
Picture Gallery – Valance
L1201 L1203 L2902 L1204 Pinch Pleated Valance Tapered Pinched Pleat Valance Tapered Pinched Pleat Valance Pinch Pleat Valance
Page 1 Page 2 Multiple Arch with Scallops
Page 2 Page 3
L1205 L1206 L2501 L2503 Cluster Pleat Valance Cluster Pleat Valance Rod Pocket Valance Rod Pocket Valance
with Scallops Straight Page 5 Contrast Pocket
Page 4 Page 4 Page 5
L2506 L2508 L2601 L2603 Double Rod Pocket Valance Double Rod Pocket Valance Waterfall Valance Waterfall Valance
Page 6 Contrast Pocket Page 7 Contrast Pocket
Page 6 Page 7
L2701 L2703 L2801 L2802 Pouf Valance Pouf Valance Rod Pocket Balloon Valance Rod Pocket Balloon Valance
Page 8 Contrast Pocket Page 9 Contrast Pocket
Page 8 Page 9
L2901 L2904 L2911 L2921 Serpentine Valance Gathered Serpentine Valance Streamer Valance Tapered Valance
Rod Pocket with Bells Rod Pocket Style A
Page 10 Page 11 Page 12 Page 13
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
L2921 L2921 L2923 L2923
Tapered Valance Tapered Valance Tapered Valance Tapered Valance
Style B Style C Contrast Pocket Contrast Pocket
Page 13 Page 13 Style A Style B
Page 13 Page 13
L2923 L2515 L2516 L2910
Tapered Valance Rod Pocket Valance Rod Pocket Valance Jester Valance
Contrast Pocket with Triangle Tier with Petticoat Page 16
Style C Page 14 Page 15
Page 13
L2914 L2711 L2713 L3403
Jester Valance Double Pouf Valance Double Pouf Valance Rod Pocket Kingston Swag
Contrast Pocket Page 17 Contrast Pocket with Jabots
Page 16 Page 17 Page 18
L3404 L3406 L2803 L2804 Rod Pocket Kingston Swag Rod Pocket Kingston Swag Gathered Butterfly Valance Gathered Butterfly Valance Contrast Pocket with Tails Page 19 Contrast Rod Pocket
Page 18 Page 18 Page 19
L3910 L2201 L2203 L2211 Gathered Butterfly Valance Headers Top & Bottom Headers Top & Bottom Rod Sleeve – No Headers
with Bows Page 20 Contrast Pocket Page 21
Page 19 Page 20
L3101 L3102 L3301 L3302 Box Pleated Valance Box Pleated Valance Inverted Box Pleated Inverted Box Pleated
Straight Scalloped Valance – Straight Valance – Scalloped
Page 22 Page 22 Page 23 Page 23
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
L3313 L3108 L3113 L3270 Inverted Box Pleated Valance Kick Pleat Valance Kick Pleat Valance Tapered Inverted
with Buttons Page 25 with Contrast Pleat Pleat Valance
Page 24 Page 25 Page 26
L3271 L3100 L3118 L3118
Tapered Inverted Pleat Valance Tapered Knife Pleat Valance Bellaire Valance Bellaire Valance
with Petticoat Page 27 Up to 120” Up to 72”
Page 26 Page 28 Page 28
L3601 L3615 L3701 L3911
Multiple Point Valance Petal Valance Pleated Balloon Valance 4 Cord Balloon Valance
Page 29 Page 30 Page 31 Page 32
L3704 L6111 L3111 L3112
Lenox Valance Fan Valance Box Pleated Tapered Valance Box Pleated Tapered Valance
Page 33 Page 34 Single Bell Pleat Double Bell Pleat
Page 35 Page 35
L3801 L3901 L3121 L3116 Soft Pleat Roman Valance Stage Coach Valance Wilmington Valance Flat & Shirred
Page 36 Page 37 Page 38 Shaped Valance
Page 39
L3920 L3921 L2931 L2932 Strap Up Valance Multiple Strap Up Pencil Pleat Corded Pencil Pleat Corded Ruffle Up to 60” Valance Ruffle Valance Valance – Contrast Pleats
Page 40 Page 40 Page 41 Page 41
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
L2929 L2930 L2933 L2934
Gathered Pencil Pleat Valance Pencil Pleat Valance Shirred Pleat Corded
Board Mounted Valance Page 43 Contrast Pleats Ruffle Valance
Page 42 Page 43 Page 44
L2935 L2936 L2937 L3350
Shirred Pleat Corded Ruffle Smocked Valance Smocked Valance Queen Anne Valance
Valance – Contrast Shirring Page 45 Contrast Smocking Page 46
Page 44 Page 45
L3104 L3106 L3105 L3136 Sheffield Valance Sheffield Valance Imperial Valance Stewart Valance
without Tails with Tails to 36” with Jabots with Jabots
Page 47 Page 47 Page 48 Page 49
L3137 L3625 L3626 L3360
Federal Valance Handkerchief Valance Handkerchief Valance Interior Awning Lined with Ties Straight Page 50 Page 51 Page 51 Page 52
L3365 L3311 L3312 L3314 Interior Awning Inverted Box Pleat Valance Inverted Box Pleat Valance Inverted Box Pleat Valance
with Scallops on Tabs – Straight on Tabs – Scalloped on Tabs – Pointed Page 52 Page 53 Page 53 Page 53
L2944 L2946 L3599 L3600
Flat Pointed Valance Flat Shaped Valance Upholstered Multiple Upholstered Multiple
Page 54 Page 54 Point Valance Point Valance with Banding
Page 55 Page 55
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
L3617 L3618 L8101 L8102
Upholstered Petal Valance Upholstered Petal Valance Cornice – Straight Cornice –Any Scallop
with Cording VL 1 VL 3 to VL 31
Page 56 Page 56 Page 57 Page 57 - 59
L8105 L8106 L8107 L8100
Shirred Face Knife Pleated 1” Pleat Knife Pleated 2” Pleat Shirred Cornice
Straight Straight Straight No Welt No Cord
Page 60 Page 60 Page 60 Page 61
L3590 L8112 L8113 L8115
Criss Cross Cornice Cornice with Unique Angled Top Cornice with Strap Valance Cornice with Unique
Page 62 Page 63 with Button Pleated Bottom
Page 64 Page 65
L8117 L8114 L8201 L8202 Box Cornice with Shirred Bottom Cornice with C 41 C 42 Page 66 In & Out Swag Lambrequin - Straight Lambrequin - Scallop
Page 67 Page 68 Page 68
L8202 L8301 L8350 L8401
C 43 Sunburst 360° Sunburst Sunburst
Lambrequin - Scallop Page 69 Page 69 with Header & Rosette
Page 68 Page 70
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
Product Group Standard Specifications - Valances *See Additional Charge Pages for more information
*Note: 3 Foot Minimum on all Board Mounted Valances
1) Fullness
a) See specific Product Page
2) Cut Allowance
a) Standard
1) Each Product Page gives the MYL approved Cut Yardage.
b) Variations
1) Any Cut Allowance other that the MYL approved Cut Allowance must be clearly stated on the Order with an
explanation of adjustments needed to be made to the product.
3) Yardage
a) Standard
1) Each Product Page gives the MYL approved Yardage.
b) Variations
1) Any Yardage other that the MYL approved Yardage must be clearly stated on the Order with an explanation of any
adjustments needed to be made to the # of cuts, the Cut Length or to the product.
c) Additional Charges*
(a) MYL charges for rolling out fabric sent with less yardage without explanation.
(b) MYL charges for rolling out fabric sent with flaws and requested to see if we can get the cuts out around the
flaws.
4) Lining
a) Standard
1) MYL has a complete selection of Lining Fabric available (see Lining Fabric Program Section).
2) Lining option is Product specific.
3) The cost of the Lining is not included in the price of the product.
4) MYL charges the same yardage as the product requires without repeat.
5) MYL requests that you do not send your own Lining unless it is contrast.
b) Variations
1) If you provide your own Lining you must not send full bolts. MYL will only accept Customers Own Lining if lining is
provided in the correct yardage amount as each Face Fabric.
(a) MYL will not stock Customers Own Lining.
(b) MYL will not accept one Lining for multiple face fabric orders.
c) Additional Charges*
(a) MYL Charges for Customer supplied Lining other than contrast.
(b) Unlined scalloped bottom items will have an additional charge as a fabric band.
d) MYL Recommends
1) Straight Bottom Valances can be either Lined or Unlined.
2) Scalloped Bottom Valances need to be self or contrast Lined. Lining will show to the front.
(a) If order states unlined, we will add a strip of fabric to the back of the scalloped valance which will result in an
additional charge as for fabric band.
5) Interlining
a) Standard
1) MYL has a complete selection of Interlinings available (see Lining Fabric Program Section).
2) Some products have a code for Interlining which covers the additional labor only, not the cost of the Interlining Fabric.
3) The cost of the Interlining fabric is not included in the price of the product.
4) MYL charges the same yardage as the product requires without repeat.
5) MYL requests that you do not send your own Interlining.
b) Variations
1) If you provide your own Interlining you must not send full bolts. MYL will only accept Customers Own Interlining if the
Interlining is provided in the correct amount as each face fabrics.
(a) MYL will not stock Customers Own Interlining.
(b) MYL will not accept one Interlining for multiple face fabric orders.
c) Additional Charges*
1) MYL Charges for Customer supplied Interlining. (See Additional Charges)
2) If no code is listed for that product to be interlined, MYL will up-charge the labor for that product.
(a) MYL charges the same yardage as the product requires without repeat.
3) MYL requests that you do not send your own Interlining.
6) Bottom Hem - Product Specific
a) Standard
1) Straight Bottom Valances have 2 inch turn up hem if lined & 2 inch double turned hem when unlined.
2) Scalloped Bottom Valances have lining to edge. Recommend Self or Contrast Lining.
7) Top
a) Standard
1) For products with Buckram/Crinoline: Four (4) inch Top is standard.
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
2) All Rod Pocket Valances: the Heading and Pocket size must be specified.
3) Board Mounted Valances: must provide Board Return / Projection.
b) Variations
1) For products with Buckram/Crinoline: You may specify 3” or 5” Pleats (Buckram/Crinoline) at no extra charge.
c) Additional Charges*
1) Pleat heights of 6” or more require an additional charge*
2) Rod Pockets greater than 6” will be an additional charge*.
3) Headings Greater than 4” will be an additional Charge*.
8) Sides
a) See specific Product Pages.
9) Finish Length
a) Standard
1) Any Finished Length up to 24 inches may be specified and still be considered a valance.
(a) Some product styles have Finished Lengths of 36” to 50” as specified on Product Page.
(b) Workroom assumes that Header is included in Finished Length calculations.
b) Short Point
1) When required, a Short Point must be specified otherwise the standard difference will be used.
2) Note: For certain products you can only specify either a Long or Short Point not both.
c) Additional Charges*
1) Finished Lengths over standard specifications will require an additional charge*.
10) Mounting
a) Standard
1) Board Mounting is included in price – 3 Foot Minimum
2) Board is ¾ inch thick.
b) Additional Charges*
1) If Velcro mount is desired, there will be an additional charge*.
11) Returns
a) Standard
1) Be sure to specify all Returns.
(a) Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼”
b) Additional Charges*
1) Additional charge for returns that are not standard sizes.
12) Measuring
a) Standard
1) Overall Width for Valance = Face Width (Rod or Board) + Left Return + Right Return.
2) Face Width must clear any under treatments by a minimum of 4” in Width and 2” on the Return.
3) OB = Outside Mount.
4) IB = Inside Mount - MYL will make ½” deduction unless otherwise specified.
5) OFM = Outside Face Measurement.
6) IM = Inside Measure – Measurement from the inside of the Left Return to the inside of the Right Return.
(a) IM is used when you want to clear an existing treatment.
13) Fabric Charges
a) Additional Charges*
1) Velvet, Suede, Leather, Upholstery Weight & Plaid fabrics require an up-charge. Check additional charge pages.
14) Trim
a) Remember to specify the Trim Placement on your Order.
15) Band and Ruffle
a) Remember to specify Band and Ruffle Width and Placement on your Order.
16) Design Elements
a) If Valances are different lengths, tops of Valances will be the same.
17) Upgrades
a) Contrast Inserts on Box Pleated and Inverted Box Pleat items will be an additional charge*.
1) To figure Face Fabric, find the number of cuts on the chart on the product page and divide by two (2), round answer up
to whole number. That is the number of cuts you need for each fabric (the face & the contrast fabric).
18) Installation
a) Board to be centered on window.
b) Brackets to be mounted 7/8” below ceiling or top of the board.
c) Brackets to be mounted 4” in on each end and every 40” to 50”.
d) Board lays on top of angles.
e) Each bracket is screwed to the bottom of board.
f) Note: Angle brackets are not included in price.
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=============Pinch Pleated Valances – Drapery Dept. Page 1
_______________________________________________________________________________________________________________________________
Always check “Additional Charges” pages (See Introduction Section)
Pins – Rings – Fabric Types
Specifications Tops are 3 Prong Pleat (French Pleat) with tack at bottom of pleat.
2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns). Must specify Return Size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
2 inch turn up for Hem when lined and 2 inch double turned Hem when unlined.
4 inch Pleats are standard. 3 or 5 inch Pleats can be specified – Over 5 inch Pleats – See Additional Charges
1 ¾ inch double Side Hems are standard.
Valance Finished Length up to 24 inches. Pins are NOT included. Specify pin position. Standard setting assumed unless otherwise specified – See Add’l. Charges Cost of Lining and Interlining not included, use same yardage as product.
This product will be Fan Folded unless Flat Fold is specified. Workroom had discretion to Flat Fold when deemed necessary.
Cutting Allowance - Cut Length = Finished Length + 10 (Lined) - Finished Length + 15 (Unlined)
Trim Prices Horizontal Vertical_____
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L1201 $45 $90 $135 $180 $225 $270 $315 $360 $405 L1202 $43 $86 $129 $172 $215 $258 $301 $344 $387 L1207 $62 $124 $186 $248 $310 $372 $434 $496 $558
Fin. Length Yardage Each
Row
Up to 12” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 24” 1 ¼ 2 ¼ 3 ¾ 4 ½ 5 ¾ 6 ¾ 8 9 10 ½ ¾
Up to 24” W/Repeat 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
L1201 - Pinch Pleated Valance – Lined $45.00 /W
L1202 - Pinch Pleated Valance – Unlined $43.00 /W
L1207 - Pinch Pleated Valance – Interlined $62.00 /W
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
======================Pinch Pleated Valances – Drapery Dept. Page 2
L1203 - $91.00 /W L2902 - $106.00 /W
Tapered Pinch Pleated Valance Tapered Pinch Pleated Valance
Lined Multiple Arch
Always check “Additional Charges” pages (See Introduction Section)
Pins – Rings – Fabric Types - Interlining
Specifications Tops are 3 Prong Pleat (French Pleat) with tack at bottom of pleat. Multiple Arch will have one arch in center up to two widths.
There will be an additional center arch for each additional width over two widths.
2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns). Must specify Return Size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
4 inch Pleats are standard. 3 or 5 inch Pleats can be specified – Over 5 inch Pleats – See Additional Charges
Valance up to 36 inches Finished Length. Must specify long and short point.
1 ¾ inch double Side Hems are standard. Pins are NOT included. Specify pin position. Standard setting assumed unless otherwise specified – See Add’l. Charges
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired, add trim charge (L27D) per unit. Cost of Lining and Interlining not included, use same yardage as product. If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 8
Trim Prices Horizontal Vertical____ ___
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L1203 $91 $182 $273 $364 $455 $546 $637 $728 $819
L2902 $106 $212 $318 $424 $530 $636 $742 $848 $954
Fin. Length Yardage Each
Row
Up to 18” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ¾
Up to 36” 1 ¼ 2 ½ 3 ¾ 5 6 ¼ 7 ½ 8 ¾ 10 11 ¼ 1
Up to 36” W/ Repeat 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ 1
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18 Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=================Pinch Pleated Valances – Drapery Dept. Page 3
Always check “Additional Charges” pages (See Introduction Section)
Pins – Rings – Fabric Types - Interlining
Specifications - Similar to Queen Anne, but not board mounted
Tops are 3 Prong Pleat (French Pleat) with tack at bottom of pleat. Space between pleats approximately 8 – 12 inch.
2 to 1 Fullness on drapery fabric.
Must use Overall Width (Face Width + 2 Returns). Must specify Return Size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
4 inch Pleats are standard. 3 or 5 inch Pleats can be specified – Over 5 inch Pleats – See Additional Charges
1 ¾ inch double Side Hems are standard.
Valance Finished Length up to 24 inches. Specify Short point, if not specified a 2 inch difference will be assumed. Pins are NOT included. Specify pin position. Standard setting assumed unless otherwise specified – See Add’l. Charges
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band
desired, add trim charge (L27D) per width. Cost of lining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 8
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
Finished Width Includes Returns
27 54 81 108 135 162 189 216 243
# of Cuts 1 2 3 4 5 6 7 8 9
L1204 $85 $170 $255 $340 $425 $510 $595 $680 $765
Fin. Length Yardage Each
Row
Up to 18” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ¾
Up to 24” 1 2 2 ¾ 3 ¾ 4 ½ 5 ½ 6 ½ 7 ½ 8 ½ ¾
Up to 24” W/Repeat 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18 Ydg
L1204 - Pinch Pleated Valance with Scallops – Lined $85.00 /W
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====================Pinch Pleated Valances – Drapery Dept. Page 4
L1205 - $127.00 /W L1206 – $101.00 /W
Cluster Pleat Valance with Scallops - Lined Cluster Pleated Valance - Straight - Lined Always check “Additional Charges” pages (See Introduction Section)
Pins – Rings – Fabric Types - Interlining
Specifications Tops are 3 Prong Pleat (French Pleat) with tack at bottom of pleat. Space between pleats approximately 8 – 12 inch.
2 ½ to 1 Fullness on drapery fabric.
Must use Overall Width (Face Width + 2 Returns). Must specify Return Size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
4 inch Pleats are standard. 3 or 5 inch Pleats can be specified – Over 5 inch Pleats – See Additional Charges
1 ¾ inch double Side Hems are standard.
(L1206) 2 inch turn up for Hem when lined and 2 inch double Hem when unlined.
Lining is pillow cased (L1205) and will show at tapers. This product should be self or contrast lined. If self or contrast band
desired, add trim charge (L27D) per unit.
Valance Finished Length up to 24 inches. Specify short point (L1205) is not specified a 2 inch difference will be assumed Pins are NOT included. Specify pin position. Standard setting assumed unless otherwise specified – See Add’l. Charges Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Fan Folded unless Flat Fold is specified. Workroom had discretion to Flat Fold when deemed necessary.
Cutting Allowance - Cut Length = Finished Length + 8
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
Finished Width Includes Returns
22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L1205 $127 $254 $381 $508 $635 $762 $889 $1,016 $1,143
L1206 $101 $202 $303 $404 $505 $606 $707 $808 $909
Fin. Length Yardage Each
Row
Up to 18” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ¾
Up to 24” 1 2 2 ¾ 3 ¾ 4 ¾ 5 ¾ 6 ½ 7 ½ 8 ½ ¾
Up to 24 W/Repeat 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
Trim
Ydg
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50
Finished Trim
Yardage -L1205 2 4 6 8 10 12 14 16 18
Finished Trim
Yardage -L1206 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============Rod Pocket Valances - Drapery Dept. Page 5
L2501 - $40.00 /W L2502 - $33.00 /W L2503 - $108.00 /W
Rod Pocket Valance Rod Pocket Valance Rod Pocket Valance
Lined Unlined Contrast Pocket
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns). Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
2 inch turn up for Hem when lined and 2 inch double Hem when unlined.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Pockets and headings on unlined valances are double turned, when fabric allows.
Valance Finished Length up to 24 inches. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 2 X (Heading + Pocket + Hem)
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2501 $40 $80 $120 $160 $200 $240 $280 $320 $360 L2502 $33 $66 $99 $132 $165 $198 $231 $264 $297 L2503 $108 $216 $324 $432 $540 $648 $756 $864 $972
Fin. Length Yardage Each
Row
Up to 12” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 24” 1 ¼ 2 ¼ 3 ¾ 4 ½ 5 ¾ 6 ¾ 8 9 10 ¼ ¾
Up to 24” W/Repeat 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====================Rod Pocket Valances - Drapery Dept. Page 6
L2506 - $45.00 /W L2507 - $41.00 /W L2508 - $113.00 /W
Double Rod Pocket Valance Double Rod Pocket Valance Double Rod Pocket Valance
Lined Unlined Contrast Pockets
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns). Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
2 inch turn up for Hem when lined and 2 inch double Hem when unlined.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Pockets and headings on unlined valances are double turned, when fabric allows.
Valance Finished Length up to 24 inches. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 2 X (Heading + Pockets + Hem)
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2506 $45 $90 $135 $180 $225 $270 $315 $360 $405 L2507 $41 $82 $123 $164 $205 $246 $287 $328 $369 L2508 $113 $226 $339 $452 $565 $678 $791 $904 $1,017
Fin. Length Yardage Each
Row
Up to 12” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 24” 1 ¼ 2 ¼ 3 ¾ 4 ½ 5 ¾ 6 ¾ 8 9 10 ¼ ¾
Up to 24” W/Repeat 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L17D $45.00 $85.60 $128.40 $171.20 $214.00 $256.80 $299.60 $342.40 $385.20
L27D $64.40 $128.80 $193.20 $257.60 $322.00 $386.40 $450.80 $515.20 $579.60 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====================Rod Pocket Valances – Specialty Dept. Page 7 Before Mounting After Mounting
L2601 - $69.00 /W L2603 - $136.00 /W
Waterfall Valance Waterfall Valance – Contrast Pocket
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns) – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Lower rod lifted to form pouf. Utility rod included for bottom. “D” Rings sewn into top and bottom of pockets for customer to
tie up to finished length.
Specify Finished Length. 8 inches will be added to finished length to allow for tie up.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Seam in center of panel is allowed. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 8 + [2 X (Heading + Pocket)] + 4
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2601 $69 $138 $207 $276 $345 $414 $483 $552 $621
L2603 $136 $272 $408 $544 $680 $816 $952 $1,088 $1,224
Fin. Length Yardage Each
Row
Up to 12” 1 2 3 4 5 6 7 8 9 ½
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==================Rod Pocket Valances – Drapery Dept. Page 8
L2701 - $43.00 /W L2702 - $38.00 /W L2703 - $111.00 /W
Pouf Valance Pouf Valance Pouf Valance
Lined Unlined Contrast Pocket
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width +2 Returns) – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Pouf Valances have face fabric front and back. When lined, lining is inside to add body. Lining is recommended.
Specify flat length. Flat length equal desired finished length plus 4 inches.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
May be made with or without header.
Sides finished but left open.
Valance Finished Length up to 24 inches. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = (Finished Length + 1) X 2
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L17D $45.00 W L32D $30.00 Ea. Row
Ruffle or Fabric Band L27D $67.50 W L42D $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2701 $43 $86 $129 $172 $215 $258 $301 $344 $387 L2702 $38 $76 $114 $152 $190 $228 $266 $304 $342 L2703 $111 $222 $333 $444 $555 $666 $777 $888 $999
Fin. Length Yardage Each
Row
Up to 12” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
====================Rod Pocket Valances – Specialty Dept. Page 9
L2801 - $120.00 /W L2802 - $189.00 /W
Rod Pocket Balloon Valance Rod Pocket Balloon Valance – Contrast Pocket
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining
Specifications 2 ½ to 1 Fullness for all fabrics.
Must use Overall Width (Face Width + 2 Returns) - Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Seams in the center of valance are allowed.
The difference between long & short point may vary. You may specify one or the other, but not both.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
May be made with or without header.
Valance Finished Length up to 24 inches.
No weight bar needed in bottom. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 25
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L171 $45.00 W L321 $30.00 Ea. Row
Ruffle or Fabric Band L271 $67.50 W L421 $45.00 Ea. Row
Fin. Width 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2801 $120 $240 $360 $480 $600 $720 $840 $960 $1,080 L2802 $189 $378 $567 $756 $945 $1,134 $1,323 $1,512 $1,701
Fin. Length Yardage Each
Row
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ 1 ½
L171 $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L271 $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===================Rod Pocket Valances – Valance Dept. Page 10
_____________________________________________________________________________________________________________________________
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width +2 Returns) – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
One dip in center up to two widths. There will be an additional center dip for each width over two widths.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Specify long and short points – Max finished length up to 24 inches can be specified.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired, add trim charge (L272) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If unlined see Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 5
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical______ _
One Row Fringe or Braid L172 $45.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L272 $67.50 W L422 $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2901 $81 $162 $243 $324 $405 $486 $567 $648 $729 L2903 $148 $296 $444 $592 $740 $888 $1,036 $1,184 $1,332
Fin. Length Yardage Each
Row
Up to 14” ½ 1 1 ½ 2 2 ½ 3 3 ½ 4 4 ½ ½
Up to 24” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ¾
L172 $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L272 $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18 Ydg
L2901 - Serpentine Valance – Rod Pocket $ 81.00 /W
L2903 - Serpentine Valance – Contrast Pocket $148.00 /W
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===================Rod Pocket Valances – Valance Dept. Page 11
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns)
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Must specify long point or short point, but not both. Valance Finished Length up to 20 inches.
One dip in center for each width.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
If header size not specified a standard 2 inch header will be used.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired, add
trim charge (L292) per unit plus cost of lining. Use same yardage as product. Cost of Lining and Interlining not included, use
same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 5
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L192 $60.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L292 $90.00 W L422 $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 1/2 to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2904 $87 $174 $261 $348 $435 $522 $609 $696 $783
Fin. Length Yardage Each
Row
Up to 14” ½ 1 1 ½ 2 2 ½ 3 3 ½ 4 4 ½ ½
Up to 20” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ¾
L192 $60.00 $120.00 $180.00 $240.00 $300.00 $360.00 $420.00 $480.00 $540.00
L292 $90.00 $180.00 $270.00 $360.00 $450.00 $540.00 $630.00 $720.00 $810.00
Fringe Ydg 2 4 6 8 10 12 14 16 18 Fringe
Band Ydg ½ ¾ 1 1 ½ 1 ¾ 2 2 ½ 2 ¾ 3 Ydg
Ruffle Ydg 1 ½ 2 ¼ 3 4 ½ 5 ¼ 6 7 ½ 8 ¼ 9
L2904 – Gathered Serpentine Valance with Bells $87.00 /W
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===================Rod Pocket Valances – Valance Dept. Page 12
______________________________________________________________________________________________________________________________
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Tassels
Specifications - 3 Foot Minimum Labor Charge.
Must use Overall Width (Face Width +2 Returns). Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Must specify Rod pocket and heading size (L2911). Header is above pocket. Workroom assumes that Header is included in
Finished Length calculations.
Figure two streamers per foot. One cut for every four streamers will do the face.
Specify long and short points only workroom will determine other lengths. Finished length up to 36 inches.
If tassels to be sewn on, there is an additional charge – See Additional Charges page. Lining is pillow cased and will show at tapers. This product must be self or contrast lined. Cost of Lining and Interlining not
included, use same yardage as product.
If product is to be Interlined – See Additional Charges
This product will be Flat Folded.
Cutting Allowance - Cut Length = Finished Length + 3
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L132 $20.00 Ft. L392 $40.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L492 $60.00 Ea. Row
Fin. Width Includes Returns
24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L2911 $318 $318 $424 $530 $636 $742 $848 $954 $1,060
L2912 $258 $258 $344 $430 $516 $602 $688 $774 $860
L2913 $318 $318 $424 $530 $636 $742 $848 $954 $1,060
Fin. Length Yardage Each
Row
Up to 24” ¾ 1 ½ 2 ¼ 2 ¼ 3 3 3 ¾ 4 ½ 4 ½ ¾
Up to 36” 1 ¼ 2 ¼ 3 ½ 3 ½ 4 ½ 4 ½ 5 ¾ 6 ¾ 6 ¾ 1 ¼
Up to 36” W/Repeat 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 1 ¼
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage 1 ½ 2 2 ½ 3 ½ 4 4 ¾ 5 ½ 6 6 ¾ Ydg
L2911 – Streamer Valance Rod Pocket $106.00 /Ft.
L2912 – Streamer Valance Velcro $ 86.00 /Ft.
L2913 – Streamer Valance Board Mount $106.00 /Ft.
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===================Rod Pocket Valances – Valance Dept. Page 13
Any Scallop Design
L2921 - $72.00 /W L2921 - $72.00 /W L2921 - $72.00 /W L2921 - $72.00 /W
Tapered Valance Tapered Valance Tapered Valance Tapered Valance
Style A Style B Style C Style D
Any Scallop Design
L2923 - $163.00 /W L2923 - $163.00 /W L2923 - $163.00 /W L2923 - $163.00 /W
Tapered Valance Tapered Valance Tapered Valance Tapered Valance
Contrast Pocket Contrast Pocket Contrast Pocket Contrast Pocket
Style A Style B Style C Style D
Always check “Additional Charges” pages (See Introduction Section)
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width +2 Returns). Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Short point should not be less that 2x (header + pocket). Specify long and short points. Specify mid point when using Style C
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired, add trim charge (L292) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If unlined – See Additional Charges
If product is to be Interlined – See Additional Charges
Cutting Allowance - Cut Length = Finished Length + 5
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size. NOTE: Order must specify style scallop, A, B, C, D. If D, include picture.
Trim Prices Horizontal Vertical One Row Fringe or Braid L192 $60.00 W L392 $40.00 Ea. Row
Ruffle or Fabric Band L292 $90.00 W L492 $60.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2921 $72 $144 $216 $288 $360 $432 $504 $576 $648 L2923 $163 $326 $489 $652 $815 $978 $1,141 $1,304 $1,467
Fin. Length Yardage Each
Row
Up to 20” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ¾
Up to 36” 1 ¼ 2 ¼ 3 ¾ 4 ½ 5 ¾ 6 ¾ 8 9 10 ¼ 1 ¼
Up to 49” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ 1 ½
L192 $60.00 $120.00 $180.00 $240.00 $300.00 $360.00 $420.00 $480.00 $540.00
L292 $90.00 $180.00 $270.00 $360.00 $450.00 $540.00 $630.00 $720.00 $810.00 Trim
Finished Trim
Yardage 2 ½ 5 7 ½ 10 12 ½ 15 17 ½ 20 22 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===================Rod Pocket Valances – Valance Dept. Page 14
_________________________________________________________________________________________________________________________________ Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns)
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Straight under layer will have a 2 inch turn up if lined - 1 inch double if unlined. Top Triangle is lined to edge. Should be self or
contrast lined.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
If header size not specified a 2 inch header will be used.
Valance Finished Length up to 24 inches.
Cost of Lining and Interlining not included, use same yardage as product.
If unlined - See Additional Charges.
If product is to be Interlined – See Additional Charges
Cutting Allowance - Cut Length = Finished Length + 6 for each layer
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L172 $45.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L272 $67.50 W L422 $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2515 $88 $176 $264 $352 $440 $528 $616 $704 $792
Fin. Length Yardage Each
Row
Up to 12”–Top Layer ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 12”
Bottom Layer ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 24”-Top Layer 1 ¼ 2 ¼ 3 ½ 4 ½ 5 ¾ 6 ¾ 8 9 10 ¼ ¾
Up to 24”
Bottom Layer 1 ¼ 2 ¼ 3 ½ 4 ½ 5 ¾ 6 ¾ 8 9 10 ¼ ¾
Up to 24” W/ Repeat-
Top Layer 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
Up to 24” W/ Repeat-
Bottom Layer 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L172 $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L272 $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Fringe Ydg 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
Band Ydg ¼ ¼ 1/2 ½ ½ ½ ¾ ¾ ¾
Ruffle Ydg ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼
L2515 – Rod Pocket Valance with Triangle Tier $88.00 /W
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===================Rod Pocket Valances – Valance Dept. Page 15
________________________________________________________________________________________________________________________________
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns)
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Must specify Rod pocket and heading size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Valance Finished Length up to 24 inches.
Petticoat is 3” longer than top valance unless otherwise specified.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band is desired,
add trim charge (L272) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If Unlined – See Additional Charges
If product is to be Interlined – See Additional Charges
Cutting Allowance - Cut Length = Finished Length + 6” for each layer.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L172 $45.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L272 $67.50 W L422 $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2516 $103 $206 $309 $412 $515 $618 $721 $824 $927
Fin. Length Yardage Each
Row
Up to 12”-Top Layer ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 12”-Bottom
Layer ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ½
Up to 24”-Top Layer 1 ¼ 2 ¼ 3 ½ 4 ½ 5 ¾ 6 ¾ 8 9 10 ¼ ¾
Up to 24”-Bottom
Layer 1 ¼ 2 ¼ 3 ½ 4 ½ 5 ¾ 6 ¾ 8 9 10 ¼ ¾
Up to 24” W/Repeat-
Top Layer 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
Up to 24” W/Repeat-
Bottom Layer 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L172 $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L272 $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Fringe Ydg 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
Band Ydg ¼ ¼ ½ ½ ½ ½ ¾ ¾ ¾
Ruffle Ydg ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼
L2516 – Rod Pocket Valance with Petticoat $103.00 /W
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===================Rod Pocket Valances – Valance Dept. Page 16
L2910 - $81.00 /W L2914 - $148.00 /W
Jester Valance Jester Valance – Contrast Pocket
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns) – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
2 dips in a single width. There will be two additional dips for each width of fabric.
Must specify Rod pocket and header size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations. If not specified a 2 inch header will be used.
Any Finished Length up to 20 inches can be specified.
Specify long and short points, if not specified there will be a 5 inch difference.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired, add
trim charge (L272) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
Cutting Allowance - Cut Length = Finished Length + 6
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L172 $45.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L272 $67.50 W L422 $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2910 $81 $162 $243 $324 $405 $486 $567 $648 $729
L2914 $148 $296 $444 $592 $740 $888 $1,036 $1,184 $1,332
Fin. Length Yardage Each
Row
Up to 12” ½ 1 1 ½ 2 2 ½ 3 3 ½ 4 4 ½ ½
Up to 20” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾ ¾
L172 $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L272 $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18 Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====================Rod Pocket Valances - Specialty Dept. Page 17
L2711 - $81.00 /W L2712 - $72.00 /W L2713 - $148.00 /W
Double Pouf Valance Double Pouf Valance Double Pouf Valance
Lined Unlined Contrast Pocket
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width +2 Returns) – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Double Pouf Valances have face fabric front and back. When lined, lining is inside to add body. Lining is recommended.
Specify flat length. Flat length equal desired finished length plus 4 inches.
Must specify Rod pocket and header size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Sides finished but left open.
Finished Length up to 24 inches may be specified. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
Cutting Allowance - Cut Length = (Finished Length + 2) X 3
Contrast Pocket Yardage = 1 cut per width at 3 times pocket size.
Trim Prices Horizontal Vertical__
One Row Fringe or Braid L171 $45.00 W L321 $30.00 Ea. Row
Ruffle or Fabric Band L271 $67.50 W L421 $45.00 Ea. Row
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2711 $81 $162 $243 $324 $405 $486 $567 $648 $729 L2712 $72 $144 $216 $288 $360 $432 $504 $576 $648 L2713 $148 $296 $444 $592 $740 $888 $1,036 $1,184 $1,332
Fin. Length Yardage Each
Row
Up to 12” 1 ¼ 2 ½ 3 ¾ 5 6 ¼ 7 ½ 8 ¾ 10 11 ¼ ½
Up to 24” 2 ¼ 4 ½ 6 ¾ 9 11 ¼ 13 ½ 15 ¾ 18 20 ¼ ¾
L171 $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L271 $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=======================Rod Pocket Valances – Valance Dept. Page 18
L3403 - $79.00 /Ft L3404 - $109.00 /Ft L3406 - $72.00 /Ft
Rod Pocket Kingston Swag Rod Pocket Kingston Swag Rod Pocket Kingston Swag
with Jabots Contrast Pockets with Tails
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications – 3 Foot Minimum Labor Charge.
Rod mounted – Must use Overall Width (Face Width + 2 Returns) – Round up to the next full foot.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Must specify Rod pocket and header size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Swag Finish Length up to 24 inches.
Four folds per swag. One swag every 20 to 25 inches.
The difference between long and short points may vary. You may specify one or the other, but not both.
MAXIMUM LENGTH OF JABOTS IS 50 INCHES – TAILS IS 36 INCHES.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired, add
trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product. If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = 1 ½ Yds. per Swag & Jabot
* Add an additional ¾ Yd for Extra Bell if Printed Fabric.
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L132 $20.00 Ft. L392 $40.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L492 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Swags 1 2 2 3 3 4 4 5 5
L3403 $237 $237 $316 $395 $474 $553 $632 $711 $790
L3404 $327 $327 $436 $545 $654 $763 $872 $981 $1,090
L3406 $216 $216 $288 $360 $432 $504 $576 $648 $720
Fin. Length Yardage Each
Jabot
Up to 50” 4 ½ 6 6 7 ½ 7 ½ 9 9 10 ½ 10 ½ 1 ½
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
Trim L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Each Swag 2 ½ 4 4 5 ½ 5 ½ 7 7 8 ½ 8 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
====================Rod Pocket Valances – Specialty Dept. Page 19
L2803 - $79.00 /W L2804 - $146.00 /W L3910 - $148.00 /W
Gathered Butterfly Valance Gathered Butterfly Valance Gathered Butterfly Valance
Contrast Rod Pocket with Bows
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types - Interlining
Specifications 2 to 1 Fullness for all fabrics.
Must use Overall Width (Face Width + 2 Returns).
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
The difference between long and short points may vary. You may specify one or the other, but not both.
Must specify Rod pocket and header size. Header is above pocket. Workroom assumes that Header is included in Finished
Length calculations.
Valance Finished Length up to 24 inches.
Cannot specify number of poufs – use chart.
No weight bar needed in bottom. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
Cutting Allowance - Cut Length = Finished Length + 25
Contrast pocket yardage = 1 cut per width at 3 times pocket size
Yardage per Bow w/ Strap = ¾ yard each – (Number of Bows needed = Number of widths of fabric.)
Trim Prices Horizontal Vertical______
One Row Fringe or Braid L171 $45.00 W L391 $40.00 Ea. Row
Ruffle or Fabric Band L271 $67.50 W L491 $60.00 Ea. Row
Fin. Width 50 75 100 125 150 175 200 225
# of Widths 2 3 4 5 6 7 8 9
# Center Poufs 1 2 3 4 5 6 7 8
L2803 $158 $237 $316 $395 $474 $553 $632 $711 L2804 $292 $438 $584 $730 $876 $1,022 $1,168 $1,314 L3910 $296 $444 $592 $740 $888 $1,036 $1,184 $1,332
Fin. Length Yardage Each
Row
Up to 24” 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ 1 ½
L171 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
Trim L271 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50
Finished Trim
Yardage 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==================================Rod Sleeves – Drapery Dept. Page 20
L2201 - $62.00 /W L2202 - $58.00 /W L2203 - $129.00 /W
Rod Sleeve Rod Sleeve Rod Sleeve
Headers Top & Bottom Headers Top & Bottom Headers Top & Bottom
Lined Unlined Contrast Pocket
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns) – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Must specify Rod pocket and header size. Headers are above and below pocket. Workroom assumes that Header is included in
Finished Length calculations.
A rod sleeve is a pocket shirred onto a rod or pole to cover entire length of rod/pole or it can be shirred on between drapery
panels. Rod Sleeves (Unlined) have face fabric front and back. When lined, lining is inside to add body. Cost of Lining and Interlining
not included, use same yardage as product.
Cutting Allowance - Cut Length = (Finished Length + 1) X 2
Contrast pocket yardage = 1 cut per width at 3 times pocket size
Trim Prices_______________ Horizontal _ __
One Row Fringe or Braid L17D $45.00 W
Ruffle or Fabric Band L27D $67.50 W
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2201 $62 $124 $186 $248 $310 $372 $434 $496 $558 L2202 $58 $116 $174 $232 $290 $348 $406 $464 $522 L2203 $129 $258 $387 $516 $645 $774 $903 $1,032 $1,161
Fin. Length Yardage
Up To 7” ½ 1 1 ½ 2 2 ½ 3 3 ½ 4 4 ½
Up to 12” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
====================================Rod Sleeves – Drapery Dept. Page 21
L2211 - $48.00 /W L2212 - $46.00 /W
Rod Sleeves – No Headers Rod Sleeves – No Headers
Lined Unlined
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types
Specifications 2 ½ to 1 Fullness for regular fabrics or 3 to 1 Fullness with sheer or light weight fabrics.
Must use Overall Width (Face Width + 2 Returns). Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Must specify Rod pocket size.
A rod sleeve is a pocket shirred onto a rod or pole to cover entire length of rod/pole or it can be shirred on between drapery
panels. Rod Sleeves (Unlined) have face fabric front and back. When lined, lining is inside to add body. Cost of Lining and Interlining
not included, use same yardage as product.
Cutting Allowance - Cut Length = (Finished Length + 1) X 2
Trim Prices___ Horizontal
One Row Fringe or Braid L17D $45.00 W
Ruffle or Fabric Band L27D $67.50 W
3 to 1 16 32 48 64 80 96 112 128 144
2 ½ to 1 22 43 65 86 108 130 151 173 194
# of Cuts 1 2 3 4 5 6 7 8 9
L2211 $48 $96 $144 $192 $240 $288 $336 $384 $432 L2212 $46 $92 $138 $184 $230 $276 $322 $368 $414
Fin. Length Yardage
Up to 7” ½ ¾ 1 ¼ 1 ½ 2 2 ¼ 2 ¾ 3 3 ½
Up to 12” ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾
L17D $45.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L27D $67.50 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50
Finished Trim
Yardage 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 22
L3101 - $67.00 /Ft L3102 - $90.00 /Ft L3103 - $90.00 /Ft
Box Pleated Valance Box Pleated Valance Box Pleated Valance
Straight Scalloped Special Scallop
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Contrast Box Pleats – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Sometimes confused with Inverted Box Pleat (see page 23 – L3301)
2 ½ to 1 Fullness – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Boxes 3 – 5 inches wide on face – spacing 9 – 13 inches from center of box to center of box.
Specify short point on scallop (L3102/L3103) – If not specified a 2 inch difference will be assumed.
Finished Length up to 24 inches may be specified.
Straight bottom (L3101) has a 2 inch turn up if lined – Line with regular lining – use same yardage as product – If unlined 2inch
double blindstitched hem is used. Scalloped bottom (L3102/L3103) lining is pillowcased and will show at tapers. This product should be self or contrast lined. If
self or contrast band desired add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal Vertical
One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3101 $201 $201 $268 $335 $402 $469 $536 $603 $670
L3102 $270 $270 $360 $450 $540 $630 $720 $810 $900
L3103 $270 $270 $360 $450 $540 $630 $720 $810 $900
Fin. Length Yardage Each
Row
Up to 24” 1 1 ¾ 2 ¾ 2 ¾ 3 ½ 3 ½ 4 ½ 5 ¼ 5 ¼ ¾
Up to 24” W/Repeat 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
L3101 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
L3102 & L3103 2 4 6 6 8 8 10 12 12
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 23
L3301 - $67.00 /Ft L3302 - $90.00 /Ft L3303 - $90.00 /Ft
Inverted Box Pleated Valance Inverted Box Pleated Valance Inverted Box Pleated Valance
Straight Scalloped Special Scallop
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Contrast Inserts – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Sometimes confused with Box Pleat (see page 22 – L3101).
2 ½ to 1 Fullness – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Spaces 9 – 13 inches from center of pleat to center of pleat.
Specify short point on scallop (L3302/L3303) – If not specified a 2 inch difference will be assumed.
Finished Length up to 24 inches may be specified.
Straight bottom (L3301) has a 2 inch turn up if lined – Line with regular lining – use same yardage as product – If unlined 2 inch
double blindstitched hem is used. Scalloped bottom (L3302/L3303) lining is pillowcased and will show at tapers. This product should be self or contrast lined – If
self or contrast band desired add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal Vertical______
One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3301 $201 $201 $268 $335 $402 $469 $536 $603 $670
L3302 $270 $270 $360 $450 $540 $630 $720 $810 $900
L3303 $270 $270 $360 $450 $540 $630 $720 $810 $900
Fin. Length Yardage Each
Row
Up to 24” 1 1 ¾ 2 ¾ 2 ¾ 3 ½ 3 ½ 4 ½ 5 ¼ 5 ¼ ¾
Up to 24” w/Repeat 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
L3301 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
L3302 & L3303 2 4 6 6 8 8 10 12 12
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 24
L3313 - $114.00 /Ft L3315 - $114.00 /Ft
Inverted Box Pleat with Buttons Inverted Box Pleat with Buttons
Contrast Inserts Contrast Inserts & Flaps
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 ½ to 1 fullness – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Valance Finished Length up to 24 inches may be specified.
Straight bottom has a 2 inch turn up if lined – Can be lined with regular lining – If unlined 2 inch double blindstitched hem is
used.
When using Repeat Fabrics: every other space will have the same repeat
o If you want every space repeat to match, double the yardage for face fabric.
Advise Button fabric – send 1/8 yards per foot of valance. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width Includes
Returns 24 36 48 60 72 84 96 108 120
# of Cuts – Face 1 1 2 2 2 2 3 3 3
# of Cuts - Contrast 1 1 2 2 2 2 3 3 3
L3313 $342 $342 $456 $570 $684 $798 $912 $1,026 $1,140
L3315 $342 $342 $456 $570 $684 $798 $912 $1,026 $1,140
Fin. Length Yardage Each
Row
Up to 24” – Face 1 1 2 2 2 2 3 3 3 ¾
Up to 24” - Contrast 1 1 2 2 2 2 3 3 3 ¾
Up to 24” w/Repeat – Face 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
Up to 24” w/Repeat – Contrast 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim Yardage 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 25
L3108 - $64.00 /Ft L3113 - $79.00 /Ft
Kick Pleat Valance Kick Pleat Valance
with Contrast Pleat
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Pleats at corners only – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Finished Length up to 24 inches may be specified.
Straight bottom has a 2 inch turn up if lined – Line with regular lining – If unlined 2 inch double blindstitched hem is used. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Note: 1 yard fabric needed for Contrast Pleat
Trim Prices Horizontal Vertical
One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 2 2 2 2 3 3 3
L3108 $192 $192 $256 $320 $384 $448 $512 $576 $640
L3113 $237 $237 $316 $395 $474 $553 $632 $711 $790
Fin. Length Yardage Each
Row
Up to 12” ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24” 1 ¼ 1 ¼ 2 ¼ 2 ¼ 2 ¼ 2 ¼ 3 ½ 3 ½ 3 ½ ¾
Up to 24” W/Repeat 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Fringe
Fringe Ydg 1 ½ 2 2 ¼ 2 ½ 3 3 ¼ 3 ½ 4 4 ¼ Ydg
Band Ydg ¼ ¼ ½ ½ ½ 1/2 ½ ¾ ¾
Ruffle Ydg ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
========Board Mounted Valances – Valance Dept. Page 26
L3270 - $88.00 /Ft L3271 - $123.00 /Ft
Tapered Inverted Pleat Valance Tapered Inverted Pleat Valance
with Petticoat
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Contrast Inserts – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Pleats at corners and in Center of Valance only – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Finished Length up to 24 inches may be specified. Standard length for petticoat is 3 inches longer than top layer.
Specify short point – If not specified a 4 inch difference will be assumed.
Top Self cord, contrast cord, or cord with lip may be specified at extra charge – See Additional Charges Page. Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band is desired
add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal Vertical____
One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 2 3 3 3 3 4 4
L3270 $264 $264 $352 $440 $528 $616 $704 $792 $880
L3271 $369 $369 $492 $615 $738 $861 $984 $1,107 $1,230
Fin. Length Yardage Each
Row
Up to 24” 1 ¼ 2 ¼ 2 ¼ 3 ½ 3 ½ 3 ½ 3 ½ 4 ½ 4 ½ ¾
Up to 24” W/Repeat 1 ½ 3 3 4 ½ 4 ½ 4 ½ 4 ½ 6 6 ¾
Ydg for petticoat 1 ¼ 2 ¼ 2 ¼ 3 ½ 3 ½ 3 ½ 3 ½ 4 ½ 4 ½ ¾
Ydg for petticoat –
W/ Repeat 1 ½ 3 3 4 ½ 4 ½ 4 ½ 4 ½ 6 6 ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Fringe Ydg 2 2 ¼ 2 ½ 3 3 ¼ 3 ½ 4 4 ¼ 4 ½ Ydg
Band Ydg ¼ ½ ¾ ¾ 1 1 1 ¼ 1 ½ 1 ½
Ruffle Ydg ¾ 1 ½ 2 ¼ 2 ¼ 3 3 3 ¾ 4 ½ 4 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
========Board Mounted Valances – Valance Dept. Page 27
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Contrast Inserts – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 ½ to 1 Fullness – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Valance Finished Length up to 24 inches may be specified. Specify long and short point – if short point not specified a 5 inch
difference will be assumed.
Top Self cord, contrast cord, or cord with lip may be specified at extra charge – See Additional Charges
Scalloped bottom has lining to edge – will not be seen, can be regular lined – can use self or contrast lining if desired. Cost of
Lining and Interlining not included, use same yardage as product. This product should not be unlined.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal Vertical
One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width Includes
Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3100 $237 $237 $316 $395 $474 $553 $632 $711 $790
Fin. Length Yardage Each
Row
Up to 24” 1 1 ¾ 2 ¾ 1 ¾ 3 ½ 3 ½ 4 ½ 5 ¼ 5 ¼ ¾
Up to 24” W/Repeat 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Fringe
Fringe / Braid Ydg 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
Ruffle / Band Ydg 2 4 6 6 8 8 10 12 12
L3100 – Tapered Knife Pleat Valance $79.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=========Board Mounted Valances – Valance Dept. Page 28
L3118 - $89.00 /Ft L3118 - $89.00 /Ft Bellaire Valance (Up to 72”) Bellaire Valance (Up to 120”) __________________________________________________________________________________________________________________________________
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Fullness is figured by flat width plus 50% – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Valance Finished Length up to 24 inches may be specified. Specify long and short point – if not specified, short point will be 6
inches shorter than long point.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If lined with regular lining, sides
are pillow cased and hem is 2 inch doubled.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal
One Row Fringe or Braid L132 $20.00 Ft
Ruffle or Fabric Band L232 $30.00 Ft.
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 3 3 3 3 4 4 4
L3118 $267 $267 $356 $445 $534 $623 $712 $801 $890
Fin. Length Yardage
Up to 18” 2 2 3 3 3 3 4 4 4
Up to 24” 3 3 4 ½ 4 ½ 4 ½ 4 ½ 6 6 6
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Fringe/Braid Ydg 2 2 ¾ 3 ½ 4 ¼ 5 ¼ 6 6 ¾ 7 ¾ 8 ½
Ruffle/Band Ydg ½ ½ ¾ ¾ 1 1 1 ¼ 1 ½ 1 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 29
L3601 – $87.00 /Ft L3602 - $147.00 /Ft
Multiple Point Valance Multiple Point Valance with Banding
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
One top triangle every 13 to 24 inches – Board mounting included in price – Must specify Return Size.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Finished Length up to 24 inches.
Underneath triangles will be 2 inches shorter than top triangles unless otherwise specified.
Lining is pillow cased and will show at tapers. This product must be self or contrast lined.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = ¾ Yd. per Triangle
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L122 $40.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L312 $60.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 36 48 60 72 84 96 108 120
# of Cuts 2 4 4 6 6 6 8 8
L3601 $261 $348 $435 $522 $609 $696 $783 $870
L3602 $441 $588 $735 $882 $1,029 $1,176 $1,323 $1,470
Fin. Length Yardage
Up to 24” 2 ¼ 3 ¾ 3 ¾ 5 ¼ 5 ¼ 5 ¼ 6 ¾ 6 ¾
L122 $120.00 $160.00 $200.00 $240.00 $280.00 $320.00 $360.00 $400.00
L312 $180.00 $240.00 $300.00 $360.00 $420.00 $480.00 $540.00 $600.00
Trim Yardage must be calculated special for each Order for this product.
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 30
L3615 - $87.00 /Ft L3616 - $127.00 /Ft
Petal Valance Petal Valance with Cording
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
One top petal every 13 to 24 inches – Petals are all the same length – Board mounting included in price
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Valance Finished Length up to 24 inches.
Lining is pillow cased and will show at tapers. This product must be self or contrast lined.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = ¾ Yd. per Petal
Trim Prices Horizontal Vertical______ __
One Row Fringe or Braid L122 $40.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L312 $60.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 36 48 60 72 84 96 108 120
# of Cuts 2 4 4 6 6 6 8 8
L3615 $261 $348 $435 $522 $609 $696 $783 $870
L3616 $381 $508 $635 $762 $889 $1,016 $1,143 $1,270
Fin. Length Yardage
Up to 24” 2 ¼ 3 ¾ 3 ¾ 5 ¼ 5 ¼ 5 ¼ 6 ¾ 6 ¾
L132 $120.00 $160.00 $200.00 $240.00 $280.00 $320.00 $360.00 $400.00
L232 $180.00 $240.00 $300.00 $360.00 $420.00 $480.00 $540.00 $600.00
Trim Yardage must be calculated special for each Order for this product.
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Specialty Dept. Page 31
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Contrast Inserts – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 ½ to 1 Fullness for all fabrics – Board mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Inverted Pleats between poufs/balloons – Rings are placed on each seam and ½ the way between. This helps hide seam and
allows the pattern to repeat across the valance – Sides are 1 inch double blindstitched.
Can not specify number of poufs – workroom will determine this number.
The difference between long and short points may vary. You may specify one or the other, but not both.
Valance Finished Length up to 24 inches may be specified. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 25
Trim Prices Horizontal Vertical___ ___
One Row Fringe or Braid L131 $20.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L231 $30.00 Ft. L491 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3701 $237 $237 $316 $395 $474 $553 $632 $711 $790
Fin. Length Yardage Each
Row
Up to 24” 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 1 ½
L131 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
L3701 - Pleated Balloon Valance $79.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=============Board Mounted Valances – Specialty Dept. Page 32
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Contrast Inserts – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
The Top row is made up of 4 cords with 2 knots on each side. Cord yardage is separate in the chart so you can use self or
contrast. 4 cords at the top should be made with fabric. Store bought cord does not work.
2 ½ to 1 Fullness for all fabrics – Board mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Valance Finished Length up to 24 inches may be specified.
The difference between long and short points may vary. You may specify one or the other, but not both.
Inverted Pleats between poufs/balloons – Rings are placed on each seam and ½ the way between. This helps hide the seam and
allows the pattern to repeat across the valance – Sides are 1 inch double blindstitched.
Can not specify number of poufs – workroom will determine this number. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 25
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L131 $20.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L231 $30.00 Ft. L491 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3911 $351 $351 $468 $585 $702 $819 $936 $1,053 $1,170
Fin. Length Yardage Each
Row
Valance Up to 24” 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 1 ½
4 Cords Yds 1 1 1 1 ½ 1 ½ 1 ½ 2 2 2
L131 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Fringe Ydg 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
Band Ydg ¼ ½ ¾ 1 1 ¼ 1 ½ 1 ¾ 2 2 ¼
Ruffle Ydg ¾ 1 ½ 2 ¼ 3 3 ¾ 4 ½ 5 ¼ 6 6 ¾
3911 – 4 Cord Balloon Valance $117.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=============Board Mounted Valances – Specialty Dept. Page 33
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Contrast Inserts – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 ½ to 1 Fullness for all fabrics – Board mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify return size
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
The difference between long and short points may vary. You may specify long point, but not both.
Width of each pouf must be between 9 & 13 inches, so that seams can be hidden and fullness is maintained.
Valance Finished Length up to 24 inches.
Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 25
Trim Prices Horizontal Vertical____ ___
One Row Fringe or Braid L131 $20.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L231 $30.00 Ft. L491 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3704 $237 $237 $316 $395 $474 $553 $632 $711 $790
Fin. Length Yardage Each
Row
Up to 24” 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 1 ½
L131 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
L3704 - Lenox Valance $79.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
============Board Mounted Valances – Specialty Dept. Page 34
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining
Specifications – 3 Foot Minimum Labor Charge.
1 ½ to 1 Fullness in width – Board mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to the next full foot – Must specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Constructed with a shirring tape 1/3 the way in from each end (up to 12 inches) to form the fan, then a tape every 8 to 12 inches,
depending on width of valance.
The difference between long and short points may vary. You may specify one or the other, but not both. Finished Length up to 36 inches. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length X 3
Trim Prices Horizontal Vertical_____
One Row Fringe or Braid L131 $20.00 Ft. L331 $ 70.00 Ea. Row
Ruffle or Fabric Band L231 $30.00 Ft. L431 $105.00 Ea. Row
Fin. Width 24 36 48 60 72 84 96 108 120 132 144
# of Cuts 1 1 2 2 2 3 3 3 4 4 4
L6111 $237 $237 $316 $395 $474 $553 $632 $711 $790 $869 $948
Fin. Length Yardage
Each
Row
36 Solid 3 3 6 6 6 9 9 9 12 12 12 3
36 Repeat 3 3 6 6 6 9 9 9 12 12 12
L131 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00 $220.00 $240.00
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 $330.00 $360.00 Trim
Finished Trim
Yardage 1 ½ 1 ½ 3 3 3 4 ½ 4 ½ 4 ½ 6 6 6 Ydg
L6111 - Fan Valance $79.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 35
L3111 - $89.00 /Ft L3112 - $89.00 /Ft
Box Pleat Tapered Valance Box Pleated Tapered Valance
Single Bell Pleat Double Bell Pleat
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge. Fullness is figured by flat width plus 50% - Board mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Specify short point, if not specified, short point will be ½ of whatever the long point is.
Valance finished length up to 50 inches
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired, add
trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product. If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 5
Trim Prices Horizontal One Row Fringe or Braid L132 $20.00 Ft
Ruffle or Fabric Band L232 $30.00 Ft.
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 3 3 3 3 4 4 4
L3111 $267 $267 $356 $445 $534 $623 $712 $801 $890
L3112 $267 $267 $356 $445 $534 $623 $712 $801 $890
Fin. Length Yardage
Up to 32” 2 2 3 3 3 3 4 4 4
Up to 50” 3 3 4 ½ 4 ½ 4 ½ 4 ½ 6 6 6
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Finished Trim
Yardage 4 ¾ 5 5 ½ 5 ¾ 6 6 ½ 6 ¾ 7 7 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Specialty Dept. Page 36
_________________________________________________________________________________________________________________________________
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top – Trim at Board Edge - Straps
Specifications – 3 Foot Minimum Labor Charge.
Board Mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must Specify Return size
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Soft Pleat Roman Valances have returns to wall.
Specify Finished Length up to 24 inches.
Folds will be about 5 inches. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = (Finished Length + 12) X 2
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L111 $10.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L491 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 1 2 2 2 2 3 3
L3801 $243 $243 $324 $405 $486 $567 $648 $729 $810
Fin. Length Yardage Each
Row
Up to 15” 1 ½ 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 1 ½
Up to 24” 2 ¼ 2 ¼ 2 ¼ 4 ½ 4 ½ 4 ½ 4 ½ 6 ¾ 6 ¾ 1 ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
Ydg Finished Trim
Yardage ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ 3 ½
L3801 – Soft Pleat Roman Valance $81.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===========Board Mounted Valances – Specialty Dept. Page 37
____________
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Board mounting included in price – Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Specify Finished Length up to 24 inches.
Cost includes ties – Specify which fabric if contrast lined.
Must be self line or contrast line – Lining fabric shows to the front – Use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 30
Trim Prices Horizontal Vertical _____
One Row Fringe or Braid L111 $10.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L491 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 2 2 2 2 3 3 3
L3901 $237 $237 $316 $395 $474 $553 $632 $711 $790
Fin. Length Yardage Each
Row
Up to 24” 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ 1 ½
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
Finished Trim
Yardage ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ 3 ½ Ydg
L3901 – Stage Coach Valance $79.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===========Board Mounted Valances – Valance Dept. Page 38
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Fullness is figured by flat width plus 50%.
Board mounting included in price – Must use Overall Width (Face Width + 2 Returns). Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Specify mid point and long point. Maximum Finished Length up to 36 inches (Including 3 inch cornice).
Scallop bottom is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band is
desired, add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
SPECIAL NOTE: We do not recommend using stripes for this product, as stripes do not line up. If striped fabric is
used we recommend the cornice be made from a contrasting fabric.
Cutting Allowance - Cut Length = Finished Length + 15
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L132 $20.00 Ft. L392 $40.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L492 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 3 3 3 4 4 4 4
L3121 $321 $321 $428 $535 $642 $749 $856 $963 $1,070
Fin. Length Yardage Each
Row
Up to 21” 2 2 3 3 3 4 4 4 4 ¾
Up to 36” 3 3 4 ½ 4 ½ 4 ½ 6 6 6 6 1 ¼
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage 4 4 4 6 6 6 8 8 8 Ydg
L3121 – Wilmington Valance $107.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
========Board Mounted Valances – Valance Dept. Page 39
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim on Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Fullness is figured by flat width plus 50% - Board mounting included in price
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Specify finished width, long point and mid point. If not specified, mid point will be ½ of whatever the long point is.
Finished length up to 50 inches on ends and 24 inches for the center may be specified.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired,
add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6”
Trim Prices Horizontal
One Row Fringe or Braid L132 $20.00 Ft
Ruffle or Fabric Band L232 $30.00 Ft.
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 3 3 3 3 4 4 4
L3116 $267 $267 $356 $445 $534 $623 $712 $801 $890
Fin. Length Yardage
Up to 32” 2 2 3 3 3 3 4 4 4
Up to 50” 3 3 4 ½ 4 ½ 4 ½ 4 ½ 6 6 6
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Finished Trim
Yardage 4 ¾ 5 5 ½ 5 ¾ 6 6 ½ 6 ¾ 7 7 ½
L3116 – Flat & Shirred Shaped Valance $89.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=========Board Mounted Valances – Specialty Dept. Page 40
L3920 - $81.00 /Ft L3921 – $81.00 /Ft
Strap Up Valance Multiple Strap Up Valance
(Up to 60”)
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim on Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Board mounting included in price – Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must
Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Includes wrapped returns.
Any finished length up to 24 inches. Specify long point only cannot specify short point.
Must be lined. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Straps included in price. Figure ¼ yard per band, specify self or contrast.
Cutting Allowance - Cut Length = Finished Length + 25
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L111 $10.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L491 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 2 2 2 3 3 3 3
# of Swoops 1 1 1 1 2 3 3 3 3
L3920 $243 $243 $324 $405
L3921 $486 $567 $648 $729 $810
Fin. Length Yardage Each
Row
Up to 24” 1 ½ 1 ½ 3 3 3 4 ½ 4 ½ 4 ½ 4 ½ 1 ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
Finished Trim
Yardage 1 1 ½ 2 2 ½ 3 3 ½ 4 4 ½ 5 Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===========Board Mounted Valances – Valance Dept. Page 41
L2931 - $264.00 /W L2932 - $331.00 /W Pencil Pleat Corded Ruffle Valance Pencil Pleat Corded Ruffle Valance–Contrast Pencil Pleats
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 2 Width Minimum.
4 to 1 Fullness is recommended or 3 to 1 Fullness minimum – Board mounted with Velcro.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Top 2 inch is Pencil Pleat.
Specify long and short points. Long on ends and short in middle. If additional dips are needed, please sketch.
2 inch Header will be used unless otherwise specified. Workroom assumes that Header is included in Finished Length
calculations.
Any finished length up to 24 inches can be specified.
Bottom 3 inch ruffle is same as face fabric unless otherwise specified.
Welt is contrast fabric.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band
desired, add trim charge (L272) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 26 (21” per cut is used for Ruffle)
Contrast Cord: Figure 1 cut per width at 3”
NOTE: Cord and Ruffle Trim are included in price. (L2931 & L2932)
Contrast Pencil Pleats are included in price. (L2932)
4 to 1 14 27 41 54 68 81 95 108 122
3 to 1 16 36 54 72 90 108 126 144 162
# of Cuts 1 2 3 4 5 6 7 8 9
L2931 $528 $528 $792 $1,056 $1,320 $1,584 $1,848 $2,112 $2,376
L2932 $662 $662 $993 $1,324 $1,655 $1,986 $2,317 $2,648 $2,979
Fin. Length Yardage Each
Row
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ 1
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18
Trim
Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=======Board Mounted Valances – Valance Dept. Page 42
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 2 Width Minimum.
4 to 1 Fullness is recommended or 3 to 1 Fullness minimum. Board mounted with velcro.
Must use Overall Width (Face Width + 2 Returns). Round up to next full foot – Must Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Any Finished Length up to 24 inches can be specified.
Gathered Top w/ Header – Standard 2 inch Header unless otherwise specified. Workroom assumes that Header is included in
Finished Length calculations.
2 inch turn up if lined – if unlined 1 inch double blindstitched hem is used.
Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L172 $45.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L272 $67.50 W L422 $45.00 Ea. Row
4 to 1 14 27 41 54 68 81 95 108 122
3 to 1 16 36 54 72 90 108 126 144 162
# of Cuts 1 2 3 4 5 6 7 8 9
L2929 $270 $270 $405 $540 $675 $810 $945 $1,080 $1,215
Fin. Length Yardage Each
Row
Up to 24” 1 1 ¾ 2 ¾ 3 ¾ 4 ¾ 5 ¾ 6 ¾ 7 ¾ 8 ¾ ½
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ 1
L172 $90.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L272 $135.00 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18 Ydg
L2929 – Gathered Board Mounted Valance $135.00 /W
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=======Board Mounted Valances – Valance Dept. Page 43
L2930 - $150.00 /W L2933 - $222.00 /W
Pencil Pleat Valance Pencil Pleat Valance
Contrast Pleats
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 2 Width Minimum.
4 to 1 Fullness is recommended or 3 to 1 Fullness minimum – Board mounted with Velcro.
Must use Overall Width (Face Width + 2 Returns) - Round up to next full foot – Must Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Pencil Pleat is 2 inches high.
Standard 2 inch header unless otherwise specified. Workroom assumes that Header is included in Finished Length
calculations.
Any finished length up to 24 inches can be specified.
2 inch turn up if lined – if unlined 1 inch double blindstitched hem is used.
Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Contrast Pleat – Figure 1 cut per width at cut length of 6”.
Trim Prices Horizontal Vertical______
One Row Fringe or Braid L172 $45.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L272 $67.50 W L422 $45.00 Ea. Row
4 to 1 14 27 41 54 68 81 95 108 122
3 to 1 16 36 54 72 90 108 126 144 162
# of Cuts 1 2 3 4 5 6 7 8 9
L2930 $300 $300 $450 $600 $750 $900 $1,050 $1,200 $1,350
L2933 $444 $444 $666 $888 $1,110 $1,332 $1,554 $1,776 $1,998
Fin. Length Yardage Each
Row
Up to 24” 1 1 ¾ 2 ¾ 3 ¾ 4 ¾ 5 ¾ 6 ¾ 7 ¾ 8 ¾ ½
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ 1
L172 $90.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L272 $135.00 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18 Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
========Board Mounted Valances – Valance Dept. Page 44
L2934 - $264.00 /W L2935 - $331.00 /W
Shirred Pleat Shirred Pleat
Corded Ruffle Valance Corded Ruffle Valance – Contrast Shirring
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 2 Width Minimum.
4 to 1 Fullness is recommended or 3 to 1 Fullness is the minimum fullness – Board mounted with Velcro
Must use Overall Width (Face Width + 2 Returns). Round up to next full foot – Must Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Shirring is 2 inches high – Standard 2 inch header unless otherwise specified. Workroom assumes that Header is included in
Finished Length calculations.
Specify long and short points. Long on the ends and short in the middle.
Any finished length up to 24 inches can be specified – Includes 3 inch ruffle. Bottom 3 inch ruffle must be specified as self
or contrast.
Specify welt as self or contrast (Placed between body and ruffle).
Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 26 (21” per cut is used for Self Ruffle)
Contrast Cord – Figure 1 cut per width at cut length of 3”
Contrast Shirring – Figure 1 cut per width at cut length of 6”
Contrast Ruffle – Figure 21” per cut.
NOTE: Cord and Ruffle Trim are included in price. (L2934 & L2935)
Contrast Shirring are included in price. (L2935)
Finished Width Includes Returns
4 to 1 14 27 41 54 68 81 95 108 122
3 to 1 16 36 54 72 90 108 126 144 162
# of Cuts 1 2 3 4 5 6 7 8 9
L2934 $528 $528 $792 $1,056 $1,320 $1,584 $1,848 $2,112 $2,376
L2935 $662 $662 $993 $1,324 $1,655 $1,986 $2,317 $2,648 $2,979
Fin. Length Yardage for 54” Fabric or Lining
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=======Board Mounted Valances – Valance Dept. Page 45
L2936 - $161.00 /W L2937 - $229.00 /W
Smocked Valance Smocked Valance
Contrast Smocking
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 2 Width Minimum.
4 to 1 Fullness recommended or 3 to 1 Fullness minimum – Board Mounted with Velcro.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Top is 4 inch smocking tape (Broken Pencil Smocking Tape).
Straight bottom has 2” turn up if lined.
Standard Header is 2”, unless specified differently. Workroom assumes that Header is included in Finished Length
calculations.
Any finished length up to 24 inches can be specified.
Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
Contrast smocking – Labor charged as fabric band, yardage 1 cut per width at cut length of 12”.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal Vertical________ One Row Fringe or Braid L172 $45.00 W L322 $30.00 Ea. Row
Ruffle or Fabric Band L272 $67.50 W L422 $45.00 Ea. Row
4 to 1 14 27 41 54 68 81 95 108 122
3 to 1 16 36 54 72 90 108 126 144 162
# of Cuts 1 2 3 4 5 6 7 8 9
L2936 $322 $322 $483 $644 $805 $966 $1,127 $1,288 $1,449 L2937 $458 $458 $687 $916 $1,145 $1,374 $1,603 $1,832 $2,061
Fin. Length Yardage Each
Row
Up to 24” 1 1 ¾ 2 ¾ 3 ¾ 4 ¾ 5 ¾ 6 ¾ 7 ¾ 8 ¾ ½
Up to 24” 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 13 ½ ¾
L172 $90.00 $90.00 $135.00 $180.00 $225.00 $270.00 $315.00 $360.00 $405.00
L272 $135.00 $135.00 $202.50 $270.00 $337.50 $405.00 $472.50 $540.00 $607.50 Trim
Finished Trim
Yardage 2 4 6 8 10 12 14 16 18 Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Drapery Dept. Page 46
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 to 1 Fullness for regular fabrics – Board Mounted with Velcro.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges. Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements. 4 inch Pleats are standard. 3 or 5 inch Pleats can be specified
Valances finished length up to 24” – Must specify Long Point – Standard 2” difference between long and short point.
1 ¾ inch double Side Hems are standard. Space approximately 8 - 12”.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired,
add trim charge (L23D) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 8
Trim Prices Horizontal Vertical______
One Row Fringe or Braid L13D $20.00 Ft. L32D $30.00 Ea. Row
Ruffle or Fabric Band L23D $30.00 Ft. L42D $45.00 Ea. Row
Finished Width Includes Returns
24 36 48 60 72 84 96 108 120
# of Cuts 1 2 2 3 3 4 4 4 5
L3350 $243 $243 $324 $405 $486 $567 $648 $729 $810
L3353 $288 $288 $384 $480 $576 $672 $768 $864 $960
Fin. Length Yardage Each
Row
Up to 18” ¾ 1 ½ 1 ½ 2 ¼ 2 ¼ 3 3 3 3 ¾ ¾
Up to 24” 1 ¼ 2 ¼ 2 ¼ 3 ½ 3 ½ 4 ½ 4 ½ 4 ½ 5 ¾ ¾
Up to 24” W/Repeat 1 ½ 3 3 4 ½ 4 ½ 6 6 6 7 ½ ¾
L13D $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L23D $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage 2 4 4 6 6 8 8 8 10 Ydg
L3350 – Queen Anne Valance - Lined $81.00 /Ft
L3353 – Queen Anne Valance - Modified Scallop or Pleat $96.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
====Board Mounted Valances – Valance Dept. Page 47
L3104 - $90.00 /Ft L3106 - $103.00 /Ft
Sheffield Valance without Tails Sheffield Valance with Tails to 36”
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 to 1 Fullness for regular fabrics – Board Mounted included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must Specify Return Size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Finished Length up to 24” may be specified. Tails can go up to 36” – if over 36” need Estimate.
Space from center of Bell to center of Bell 14” – 20”.
Must specify long point – standard 3” difference between long and short point.
Contrast bell add 20% to labor charge.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band is
desired, add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut length = Finished Length + 6
Trim Prices Horizontal Vertical
One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3104 $270 $270 $360 $450 $540 $630 $720 $810 $900
L3106 $309 $309 $412 $515 $618 $721 $824 $927 $1,030
Fin. Length Yardage Each
Row
Up to 24” 1 1 ¾ 2 ¾ 2 ¾ 3 ½ 3 ½ 4 ½ 5 ¼ 5 ¼ ¾
Up to 24” W/Repeat 1 ½ 3 4 1/2 4 1/2 6 6 7 ½ 9 9 ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Fringe Ydg 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
Band Ydg ¼ ½ ¾ ¾ 1 1 1 ¼ ½ ½
Ruffle Ydg ¾ 1 ½ 2 ¼ 2 ¼ 3 3 3 ¾ 4 ½ 4 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
======Board Mounted Valances – Valance Dept. Page 48
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Board Mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Jabot finished length up to 50” – Jabot width is 6”.
Shortest point is at Bell up to 24” – if not specified, short point will be ½ of the long point.
Number of spaces & bells are determined by the work room.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired,
add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 6
Trim Prices Horizontal
One Row Fringe or Braid L132 $20.00 Ft
Ruffle or Fabric Band L232 $30.00 Ft.
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 3 3 3 3 4 4 4
L3105 $267 $267 $356 $445 $534 $623 $712 $801 $890
Fin. Length Yardage
Up to 30” 2 2 3 3 3 3 4 4 4
Up to 50” 3 3 4 ½ 4 ½ 4 ½ 4 ½ 6 6 6
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Finished Trim
Yardage 4 ¾ 5 5 ½ 5 ¾ 6 6 ½ 6 ¾ 7 7 ½
L3105 – Imperial Valance with Jabots $89.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====Board Mounted Valances – Valance Dept. Page 49
___________________________________________________________________________________________________________________________ Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Board mounting included in price
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Specify short and long point – Maximum scallop finish length to 24” – Workroom will determine number of scallops.
Jabot Finish Length. up to 50”, Jabots are 10” wide each.
Lining is pillow cased and will show at tapers. This should be self or contrast lined – If self or contrast band is desired add
trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = (1 ½ Yds. / for Prints) + 3 Yds. / Window for Jabots & Returns.
(1 Yd. / for Solids) + 3 Yds. / Window for Jabots & Returns.
Trim Prices
One Row Fringe or Braid L132 $20.00 Ft.
Ruffle or Fabric Band L232 $30.00 Ft.
Overall Width 36 48 60 72 84 96 108 120
# of Cuts 2 2 3 3 4 4 5 5
L3136 $267 $356 $445 $534 $623 $712 $801 $890
Fin. Length Yardage
Up to 24” 3 3 4 ½ 4 ½ 6 6 7 ½ 7 ½
Up to 24” Solids 2 ½ 2 ½ 3 ½ 3 ½ 4 ½ 4 ½ 5 ½ 5 ½
L132 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Finished Trim
Yardage 7 8 ½ 10 11 ½ 13 14 ½ 16 17 ½
L3136 – Stewart Valance with Jabots $89.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
========Board Mounted Valances – Valance Dept. Page 50
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Board mounting included in price – Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Swag Finished Length up to 24” – Swags are approximately 18 to 24” wide.
Straps over interior bells.
Lining is pillow cased and will show at tapers. This product should be self or contrast lined. If self or contrast band desired,
add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same yardage as product.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 27
Trim Prices Horizontal Vertical______
One Row Fringe or Braid L132 $20.00 Ft. L392 $40.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L492 $60.00 Ea. Row
Finished Width Includes Returns
24 36 48 60 72 84 96 108 120
# of Cuts 1 2 2 3 3 4 4 4 5
L3137 $243 $243 $324 $405 $486 $567 $648 $729 $810
Fin. Length Yardage Each
Row
Up to 24” W/Repeat 1 ½ 3 3 4 ½ 4 ½ 6 6 6 7 ½ ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage 1 ½ 2 2 ½ 3 3 ½ 4 4 ½ 5 5 ½ Ydg
L3137 – Federal Valance $81.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==============Board Mounted Valances – Valance Dept. Page 51
L3625 - $194.00 /Ea L3626 - $213.00 /Ea
Handkerchief Valance Handkerchief Valance with Ties
Always check “Additional Charges” pages (See Introduction Section) Fabric Types – Interlining – Trim at Board Edge – Finished Top
Specifications Board mounting included in price – Face Width only – Round up to next full foot.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Maximum Finish Length up to 24” – Ear/Tail length will vary – Must specify if you want a certain length.
One top triangle every 22 to 36 inches.
This product can be self, contrast or regular lined – Use same yardage as product – cost of regular lining not included in
price.
If product is to be Interlined – See Additional Charges
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = 1 ½ Yd. per Triangle
Trim Prices Horizontal
One Row Fringe or Braid L182 $60.00 Ea.
Ruffle or Fabric Band L282 $90.00 Ea.
Face Width
Includes Returns 36 48 60 72 84 96 108 120
# of Swags 1 2 2 2 3 3 3 4
L3625 $194 $388 $388 $388 $582 $582 $582 $776
L3626 $213 $426 $426 $426 $639 $639 $639 $852
Fin. Length Yardage
Up to 24” 1 ½ 3 3 3 4 ½ 4 ½ 4 ½ 6
L182 $60.00 $120.00 $120.00 $120.00 $180.00 $180.00 $180.00 $240.00
L282 $90.00 $180.00 $180.00 $180.00 $270.00 $270.00 $270.00 $360.00
Finished Trim
Yardage 3 6 6 6 9 9 9 12
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=======Board Mounted Valances – Valance Dept. Page 52
L3360 - $117.00 /Ft L3365 - $138.00 /Ft
Interior Awning Straight Interior Awning with Scallops
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types
Specifications – 3 Foot Minimum Labor Charge – Must be board mounted.
Must use Overall Width (Face Width + bottom 2 (rod) Returns) – Round up to next full foot – Must Specify Return Size.
Note: Standard return at top is 1 ½” unless otherwise specified.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
No fullness- flat treatment – Closed sided and Bottom Rod included in price – Specify rod return for bottom (7 ½ , 9 ¼ ).
Maximum Finished Length up to 24” – Drop + skirt (see sketch below).
Standard skirt is 5” unless otherwise specified – Skirt must be self or contrast lined.
Body may be lined with regular lining (not included in price, use same yardage as product) – Self or Contrast lining may be
used, use same yardage as product.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 15
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L132 $20.00 Ft. L392 $40.00 Ea. Row
Ruffle or Fabric Banc L232 $30.00 Ft. L492 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 1 2 2 2 2 3 3
L3360 $351 $351 $468 $585 $702 $819 $936 $1,053 $1,170
L3365 $414 $414 $552 $690 $828 $966 $1,104 $1,242 $1,380
Fin. Length Yardage Each
Row
Fin. Length to 24” 1 ½ 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 1 ¼
L131 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage 1 ½ 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ Ydg
----
----
---- Bottom Return
Rod
Skirt
Vital Information Board Return
Drop
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
====================Tab Valances – Valance Dept. Page 53
L3311 - $104.00 /Ft L3312 - $120.00 /Ft L3314 - $120.00 /Ft
Inverted Box Pleat Valance Inverted Box Pleat Valance Inverted Box Pleat Valance
on Tabs - Straight on Tabs – Scalloped on Tabs – Pointed
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Interlining – Contrast Inserts
Specifications – 3 Foot Minimum Labor Charge.
2 ½ to 1 Fullness for regular fabrics.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must Specify Return Size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Pole mounting not included in price.
Finished Length of valance from the top of the tab up to 24” maximum.
Specify width of tabs ( 1 ¾” is the workroom standard)
Fabric tabs at top for 1” rod use 2” tabs – 1 3/8” rod use 3” tabs – 2” inch rod use 4” tab – Length of tab after it is folded.
May specify contrast tabs at no extra charge – Allow extra ¼ yard per cut for contrast tabs.
Straight bottom (L3311) has a 2 inch turn up if lined – May be lined with regular lining, use same yardage as product. – If
unlined 2” double blindstitched hem is used.
Scalloped bottom (L3312/L3314) lining is pillow cased and will show at tapers. This product should be self or contrast lined
– If self or contrast band desired add trim charge (L232) per unit. Cost of Lining and Interlining not included, use same
yardage as product.
If product is to be Interlined – See Additional Charges
Cutting Allowance - Cut Length = Finished Length + 10
Trim Prices Horizontal Vertical One Row Fringe or Braid L132 $20.00 Ft. L322 $30.00 Ea. Row
Ruffle or Fabric Band L232 $30.00 Ft. L422 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6
L3311 $312 $312 $416 $520 $624 $728 $832 $936 $1,040
L3312 $360 $360 $480 $600 $720 $840 $960 $1,080 $1,200
L3314 $360 $360 $480 $600 $720 $840 $960 $1,080 $1,200
Fin. Length Yardage Each
Row
Up to 17” ¾ 1 ½ 2 ¼ 2 ¼ 3 3 3 ¾ 4 ½ 4 ½ ¾
Up to 24” 1 ¼ 2 ¼ 3 ½ 3 ½ 4 ½ 4 ½ 5 ¾ 6 ¾ 6 ¾ ¾
Up to 24” W/Repeat 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 ¾
L132 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L232 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00 Trim
Finished Trim
Yardage L3311 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 Ydg
Finished Trim
Yardage L3312 2 4 6 6 8 8 10 12 12
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===========Upholstered Soft Valances – Specialty Dept. Page 54
L2944 - $69.00 /Ft L2946 - $69.00 /Ft
Flat Pointed Valance Flat Shaped Valance
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Flat with no fullness – Board mounting included in price
Must use Overall Width (Face Width +2 Returns) – Round up to next full foot – Must specify Return size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Wood frame made from ¼” plywood covered in flannel to simulate a soft valance.
May specify long and short point – maximum finish length up to 24” – If no short point given workroom will determine short
point.
Lining is included in price.
Top self cord, contrast cord or cord with lip may be specified at no additional charge.
Bottom trim additional (L131) or (L231).
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 16
Trim Prices Horizontal Vertical
One Row Fringe or Braid L131 $20.00 Ft. L321 $30.00 Ea. Row
Ruffle or Fabric Band L231 $30.00 Ft. L421 $45.00 Ea. Row
Fin. Width
Includes Returns
24
36
48
60
72
84
96
108
120
# of Cuts 1 1 2 2 2 2 3 3 3
L2944 $207 $207 $276 $345 $414 $483 $552 $621 $690
L2946 $207 $207 $276 $345 $414 $483 $552 $621 $690
Fin. Length Yardage Each
Row
Up to 12” ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24” 1 ¼ 1 ¼ 2 ¼ 2 ¼ 2 ¼ 2 ¼ 3 ½ 3 ½ 3 ½ ¾
Up to 24” w/Repeat 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
L131 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
Fringe
Ydg
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Fringe Ydg 1 1 ½ 1 ¾ 2 2 ½ 2 ¾ 3 3 ½ 3 ¾
Band Ydg ¼ ¼ ½ ½ ½ ½ ½ ¾ ¾
Ruffle Ydg ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====Upholstered Soft Valances – Specialty Dept. Page 55
L3599 - $87.00 /Ft L3600 - $147.00 /Ft
Upholstered Multiple Point Valance Upholstered Multiple Point Valance
with Banding
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Flat with no fullness – Board mounting included in price
Must use Overall Width (Face Width + 2 Returns) – Round to next full foot – Must specify Return size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Triangles made from ¼” plywood covered with flannel to simulate soft valance – one top triangle every 13 – 24”
Underneath triangles will be 2” shorter than top triangles unless otherwise specified – maximum finish length up to 24”.
Cost of lining included – If self or contrast lining is desired use same yardage as product.
Top self cord, contrast cord or cord with lip may be specified at no additional charge.
Bottom trim additional (L121).
Banding (L311) included in price (L3600). Must advise band size.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = ¾ Yd. per Triangle
Trim Prices Horizontal
One Row Fringe or Braid L121 $40.00 Ft.
Ruffle or Fabric Band L311 $60.00 Ft.
Fin. Width Includes
Returns
36
48
60
72
84
96
108
120
# of Cuts 2 4 4 6 6 6 8 8
L3599 $261 $348 $435 $522 $609 $696 $783 $870
L3600 $441 $588 $735 $882 $1,029 $1,176 $1,323 $1,470
Fin. Length Yardage
Up to 24” 2 ¼ 3 ¾ 3 ¾ 5 ¼ 5 ¼ 5 ¼ 6 ¾ 6 ¾
L131 $120.00 $160.00 $200.00 $240.00 $280.00 $320.00 $360.00 $400.00
L231 $180.00 $240.00 $300.00 $360.00 $420.00 $480.00 $540.00 $600.00
Finished Trim Yardage 4 ½ 7 ½ 10 ½ 13 ½ 15 16 ½ 18 19 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====Upholstered Soft Valances – Specialty Dept. Page 56
L3617 - $87.00 /Ft L3618 - $127.00 /Ft
Upholstered Petal Valance Upholstered Petal Valance with Cording
Always check “Additional Charges” pages (See Introduction Section)
Fabric Types – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Flat with no fullness – Board mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Must round to next full foot – Must specify Return size.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Petals made from ¼” plywood covered with flannel to simulate a soft valance – One top petal every 13 – 24”.
Underneath petals same finish length as top petals – maximum finish length up to 24”.
Cost of lining included – If self or contrast lining desired use same yardage as product.
Top self cord, contrast cord or cord with lip may be specified at no additional charge.
Cording is included on bottom of L3618.
Banding (L331) additional charge. Must advise band size.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = ¾ Yd. per Petal
Trim Prices Horizontal
One Row Fringe or Braid L121 $40.00 Ft.
Ruffle or Fabric Band L311 $60.00 Ft.
Fin. Width Includes
Returns
36
48
60
72
84
96
108
120
# of Cuts 2 4 4 6 6 6 8 8
L3617 $261 $348 $435 $522 $609 $696 $783 $870
L3618 $381 $508 $635 $762 $889 $1,016 $1,143 $1,270
Fin. Length Yardage
Up to 24” 2 ¼ 3 ¾ 3 ¾ 5 ¼ 5 ¼ 5 ¼ 6 ¾ 6 ¾
L131 $120.00 $160.00 $200.00 $240.00 $280.00 $320.00 $360.00 $400.00
L231 $180.00 $240.00 $300.00 $360.00 $420.00 $480.00 $540.00 $600.00
Finished Trim Yardage 4 ½ 5 ½ 6 ½ 7 ½ 8 ½ 9 ½ 10 ½ 11 ½
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============================Cornices – Specialty Dept. Page 57
L8101 - $57.00 /Ft L8102 - $69.00 /Ft
Cornice – Straight Cornice – Any Scallop
(VL 1 pictured above) (VL 3 pictured above)
See page 58 & 59 for
Scallop Design Choices (VL 4 – VL 31)
Always check “Additional Charges” pages (See Introduction Section)
Specifications – 3 Foot Minimum Labor Charge.
Flat with no fullness – Board mounting included in price.
Must use Overall Width (Face Width + 2 Returns) – Round to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame are made from white pine – Boards are padded with polyester batting.
Maximum finish length up to 24”.
Top & Bottom cord included in price – Advise if self or contrast welt or cord with lip.
For contrast welt (fabric) send ¼ yard per cut for fabric needed to make cornice.
Lining included in price.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 16
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L111 $10.00 Ft. L321 $30.00 Ea. Row
Ruffle or Fabric Band (Straight) L211 $15.00 Ft. L421 $45.00 Ea. Row
Flat Fabric Band (Scallop) L221 $17.60 Ft.
Shirred or Pleated Band (Scallop) L231 $30.00 (for Straight, see L8117)
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 2 2 2 2 3 3 3
L8101 $171 $171 $228 $285 $342 $399 $456 $513 $570
L8102 $207 $207 $276 $345 $414 $483 $552 $621 $690
Fin. Length Yardage Each
Row
Up to 12” ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24” 1 ¼ 1 ¼ 2 ¼ 2 ¼ 2 ¼ 2 ¼ 3 ½ 3 ½ 3 ½ ¾
Up to 24” W/Repeat 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
L221 $52.80 $52.80 $70.40 $88.00 $105.60 $123.20 $140.80 $158.40 $176.00
Finished Trim Ydg -
L8101 Ea. Row ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ 3 ½ Ydg
Finished Trim Ydg -
L8102 Ea. Row 1 1 ½ 2 2 ½ 3 3 ½ 4 4 ½ 5
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============================Cornices – Specialty Dept. Page 58
L8102 Cornice Boards - Designate Scallop Design VL 3 - VL 31
VL - 4 VL - 5
VL - 6 VL - 7
VL - 8 VL - 9
VL - 10 VL - 11
VL - 12 VL - 13
VL - 14 VL - 15
VL - 16 VL – 17
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============================Cornices – Specialty Dept. Page 59
VL - 18 VL - 19
VL - 20 VL - 21
VL - 22 VL - 23
VL - 24 VL - 25
VL - 26 VL - 27
VL - 28 VL - 29
VL - 30 VL - 31
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============================Cornices – Specialty Dept. Page 60
L8105 - $86.00 /Ft L8106 - $101.00 /Ft L8107 - $101.00 /Ft Shirred Face Cornice – Straight Knife Pleated 1” Pleats – Straight Knife Pleated 2” Pleats – Straight
L8109 - $101.00 /Ft L8110 - $117.00 /Ft L8111 - $117.00 /Ft Shirred Face – Any Scallop Knife Pleated 1” Pleats – Any Scallop Knife Pleated 2” Pleats Any Scallop
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 ½ to 1 fullness for regular fabrics.
Must use Overall Width (Face Width + 2 Returns) – Round to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Boards are padded with polyester batting.
Maximum finish length up to 24”
Top & Bottom cord included in price – Advise if self, contrast cord or cord with lip.
For contrast cord (fabric) send ¼ yard per cut of fabric needed to make cornice.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 16
Trim Prices Horizontal Vertical_____ _
One Row Fringe or Braid L111 $10.00 Ft. L321 $30.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L421 $45.00 Ea. Row
Shirred or Pleated Band (Straight) L231 $30.00 Ft.
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 6 6 L8105 $258 $258 $344 $430 $516 $602 $688 $774 $860
L8106 $303 $303 $404 $505 $606 $707 $808 $909 $1,010
L8107 $303 $303 $404 $505 $606 $707 $808 $909 $1,010
L8109 $303 $303 $404 $505 $606 $707 $808 $909 $1,010
L8110 $351 $351 $468 $585 $702 $819 $936 $1,053 $1,170
L8111 $351 $351 $468 $585 $702 $819 $936 $1,053 $1,170
Fin. Length Yardage Each
Row
Up to 12” ¾ 1 ½ 2 ¼ 2 ¼ 3 3 3 ½ 4 ½ 4 ½ ½
Up to 24” 1 ¼ 2 ½ 3 ¾ 3 ¾ 5 5 6 ¼ 7 ½ 7 ½ ¾
Up to 24” w/Repeat 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 9 9 ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
L221 $52.80 $52.80 $70.40 $88.00 $105.60 $123.20 $140.80 $158.40 $176.00
Finished Trim
Yardage ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ 3 ½ Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=========================Cornices – Specialty Dept. Page 61
______________________________________________________________________________________________________________________________ Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Interlining – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 ½ time fullness for regular fabrics.
Must use Overall Width (Face Width + 2 Returns) – Round to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Boards are padded with polyester batting.
Maximum Finish Length up to 24”.
Lining is included in price.
No cord at top or bottom.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 16
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 2 3 3 4 4 5 5 6
L8100 $171 $171 $228 $285 $342 $399 $456 $513 $570
Fin. Length Yardage
Up to 12” ¾ 1 ½ 2 ¼ 2 ¼ 3 3 3 ¾ 3 ¾ 4 ½
Up to 24” 1 ¼ 2 ¼ 3 ½ 3 ½ 4 ½ 4 ½ 5 ¾ 5 ¾ 6 ¾
Up to 24” w/Repeat 1 ½ 3 4 ½ 4 ½ 6 6 7 ½ 7 ½ 9
L8100 – Shirred Cornice – No Welt No Cord $57.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==========================Cornices – Specialty Dept. Page 62
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
2 ½ times fullness for regular fabrics.
Must use Overall Width (Face Width + 2 Returns) – Round to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Boards are padded with polyester batting.
Maximum Finish Length up to 24”.
Welting at top only included in price.
Specify if self, contrast or cord with lip – Contrast welt (fabric) send ¼ yard per cut of fabric needed to make cornice.
Lining included in price.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = (Finished Length x 2 ½) + 16
Trim Prices Horizontal Vertical
One Row Fringe or Braid L131 $20.00 Ft. L321 $30.00 Ea. Row
Ruffle or Fabric Band L231 $30.00 Ft. L421 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 2 2 2 3 3 3 3
L3590 $333 $333 $444 $555 $666 $777 $888 $999 $1,110
Fin. Length Yardage Each
Row
Up to 12” 3 3 3 3 3 4 ½ 4 ½ 4 ½ 4 ½ ½
Up to 24” 4 ¼ 4 ¼ 4 ¼ 4 ¼ 4 ¼ 6 ½ 6 ½ 6 ½ 6 ½ ¾
Up to 24” w/Repeat 4 ½ 4 ½ 4 ½ 4 ½ 4 ½ 6 ¾ 6 ¾ 6 ¾ 6 ¾ ¾
L131 $60.00 $60.00 $80.00 $100.00 $120.00 $140.00 $160.00 $180.00 $200.00
L231 $90.00 $90.00 $120.00 $150.00 $180.00 $210.00 $240.00 $270.00 $300.00
Fringe Ydg 1 1 ½ 1 ¾ 2 2 ½ 2 ¾ 3 3 ½ 3 ¾ Fringe
Band Ydg ¼ ¼ ½ ½ ½ ½ ½ ¾ ¾ Ydg
Ruffle Ydg ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼
L3590 – Criss Cross Cornice $111.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============================Cornices – Specialty Dept. Page 63
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
*Note: Add an additional 1” to return size to account for double board.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Boards are covered with polyester batting – Made as double board.
Maximum Finish Length up to 24”.
Welting at Top & Bottom edge – Advise if self, contrast or cord with lip.
For contrast welt (fabric) send ¼ yard per cut of fabric needed to make cornice.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 15
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L111 $10.00 Ft. L321 $30.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L421 $45.00 Ea. Row
Shirred or Pleated Band (Straight) L221 $17.60 Ft.
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 4 4 4 4 6 6 6
L8112 $303 $303 $404 $505 $606 $707 $808 $909 $1,010
Fin. Length Yardage Each
Row
Up to 12”-Cornice ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 12”-Triangle Insert ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24”-Cornice 1 ¼ 1 ¼ 2 ½ 2 ½ 2 ½ 2 ½ 3 ¼ 3 ¼ 3 ¼ ¾
Up to 24”-Triangle Insert 1 ¼ 1 ¼ 2 ½ 2 ½ 2 ½ 2 ½ 3 ¼ 3 ¼ 3 ¼ ¾
Up to 24” w/Repeat Cornice 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
Up to 12” w/repeat
Triangle Insert 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00
L221 $52.80 $52.80 $70.40 $88.00 $105.60 $123.20 $140.80 $158.40 $176.00 Trim
Finished Trim Ydg - Top ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ 3 ½ Ydg
Finished Trim Ydg - Bottom 1 ¾ 2 ½ 3 ½ 4 ¼ 5 6 6 ¾ 7 ½ 8 ½
L8112 – Cornice with Unique Angled Top $101.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==========================Cornices – Specialty Dept. Page 64
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements.
Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Board is padded with polyester batting.
Overlay finish length in center depends on cornice height – Tab length and width depend on finish length – Button depends on
Tab width and length.
Welting at Top & Bottom included in price – Specify if self, contrast or welt with lip – Contrast welt (fabric) send ¼ yard per
cut of fabric needed for cornice.
Lining included in price.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 16 (Valance & Overlay)
Trim Prices Horizontal Vertical________
One Row Fringe or Braid L111 $10.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L491 $60.00 Ea. Row
Shirred or Pleated Band (Straight) L221 $17.60 Ft.
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 2 2 4 4 4 4 6 6 6
L8113 $303 $303 $404 $505 $606 $707 $808 $909 $1,010
Fin. Length Yardage Each
Row
Up to 12”-Cornice ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 12”-Over Lay ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24”-Cornice 1 ¼ 1 ¼ 2 ½ 2 ½ 2 ½ 2 ½ 3 ¼ 3 ¼ 3 ¼ ¾
Up to 24”-Over Lay 1 ¼ 1 ¼ 2 ½ 2 ½ 2 ½ 2 ½ 3 ¼ 3 ¼ 3 ¼ ¾
Up to 24” w/Repeat Cornice 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
Up to 24”w/repeat-Over Lay 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00
L221 $52.80 $52.80 $70.40 $88.00 $105.60 $123.20 $140.80 $158.40 $176.00 Trim
Fringe Ydg 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ Ydg
Band Ydg ¼ ¼ ½ ½ ½ ½ ¾ ¾ ¾
Ruffle Ydg ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼
L8113 – Cornice with Strap Valance with Button $101.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============================Cornices – Specialty Dept. Page 65
__________________________________________________________________ __
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements. Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Board is padded with polyester batting.
Pleated bottom finish length is 5” – Decorative straps start in approximately 6 – 15” and middle swoops are between 18 & 30” –
If a specific number of swoop are desired please specify.
Welting at Top and between Cornice and Pleated Bottom included in price – Specify if self, contrast or cord with lip – Contrast
welt (fabric) send ¼ yard per cut of fabric needed for cornice.
Lining included in price.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 42
Trim Prices Horizontal Vertical________ One Row Fringe or Braid L111 $10.00 Ft. L391 $40.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L491 $60.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 2 2 2 2 3 3 3
# of center swags 1 1 1 2 2 2 3 3 3
L8115 $303 $303 $404 $505 $606 $707 $808 $909 $1,010
Fin. Length Yardage Each
Row
Up to 12”-Cornice ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Unique Bottom ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24”-Cornice 1 1 2 2 2 2 3 3 3 ¾
Unique Bottom ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ¾
Up to 24” w/Repeat -
Cornice 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
W/Repeat -Unique Bottom ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
Finished Trim Yardage ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ 3 ½ Ydg
L8115 – Cornice with Unique Pleated Bottom $101.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
===============================Cornices – Specialty Dept. Page 66
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements. Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Board is padded with polyester batting.
Maximum Finish Length up to 24” – This includes 2 ½” shirred bottom – Specify cornice height.
Welting at Top & Bottom edge of cornice and bottom edge of shirred edge included in price – Specify if self, contrast or cord
with lip – Contrast welt (fabric) send ¼ yard per cut of fabric needed for cornice.
Cornice lining included in price.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cut Length = Finished Length + 16
Trim Prices Horizontal Vertical_______ One Row Fringe or Braid L111 $10.00 Ft. L321 $30.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L421 $45.00 Ea. Row
Fin. Width
Includes Returns 24 36 48 60 72 84 96 108 120
# of Cuts 1 1 2 2 2 2 3 3 3
L8117 $303 $303 $404 $505 $606 $707 $808 $909 $1,010
Fin. Length Yardage Each
Row
Up to 12” - Flat ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
- Shirred ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24” - Flat 1 1 2 2 2 2 3 3 3 ¾
- Shirred ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ¾
Up to 24” - Flat 1 ½ 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
w/Repeat - Shirred ¾ ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ¾
L111 $30.00 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
Finished Trim
Yardage ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ 3 ½ Ydg
L8117 – Box Cornice with Shirred Bottom $101.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
========================Cornices – Specialty Dept. Page 67
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot – Must specify Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements. Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Wood frame made from white pine – Board is padded with polyester batting.
Maximum Finish Length up to 24”
Only 2 swags (as shown) – Maximum swag length is 30” – If not specified swag length will be 6” longer than cornice – Swag
fabric is railroaded.
Swags attached to cornice as shown with 1 ½” covered button (included in price) – Specify fabric for button (need 1/8 yard).
Welting at Top & Bottom included in price – Specify if self, contrast or cord with lip – Contrast welt (fabric) send ¼ yard per
cut of fabric needed for cornice.
Cornice Lining included in price – Swags must be Lined – Cost of Lining not included, use same yardage as swag product.
The inside measurement of a cornice is 1 ½ inches less than the outside measurement.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Cutting Allowance - Cornice Cut Length = Finished Length + 16 --- Plus Swag
Trim Prices Horizontal Vertical_______
One Row Fringe or Braid L111 $10.00 Ft. L321 $30.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L421 $45.00 Ea. Row
Fin. Width
Includes Returns 36 48 60 72 84 96 108 120
# of Cuts - Cornice 1 2 2 2 2 3 3 3
L8114 $375 $500 $625 $750 $875 $1,000 $1,125 $1,250
Fin. Length Yardage Each
Row Swag Yards – Each Cornice 3 3 3 3 6 6 6 6
Up to 12”-Cornice ¾ 1 ½ 1 ½ 1 ½ 1 ½ 2 ¼ 2 ¼ 2 ¼ ½
Up to 24”-Cornice 1 ½ 2 ¼ 2 ¼ 2 ¼ 2 ¼ 3 ½ 3 ½ 3 ½ ¾
Up to 24” w/Repeat Cornice 1 ½ 3 3 3 3 4 ½ 4 ½ 4 ½ ¾
Up to 24”w/ repeat-Swag 4 ½ 4 ½ 4 ½ 4 ½ 8 8 8 8 ¾
L111 $30.00 $40.00 $50.00 $60.00 $70.00 $80.00 $90.00 $100.00
L211 $45.00 $60.00 $75.00 $90.00 $105.00 $120.00 $135.00 $150.00 Trim
Finished Trim Yardage
Cornice 1 ½ 2 2 ½ 3 3 ½ 4 4 ½ 5 Ydg
Finished Trim Yardage Swag 4 4 4 4 6 6 6 6
L8114 – Cornice with In and Out Swag $125.00 /Ft
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
==========================Lambrequins – Specialty Dept. Page 68
Any Scallop Design
C-41 C-42 C-43 C-44
L8201 L8202 L8202 L8202
Lambrequin - Straight Lambrequin - Scallop Lambrequin - Scallop Lambrequin - Scallop
Always check “Additional Charges” pages (See Introduction Section)
Fabric Type – Finished Top
Specifications – 3 Foot Minimum Labor Charge.
Flat with no fullness.
Must use Overall Width (Face Width + 2 Returns) – Round up to next full foot for Finished Width on chart – Must specify
Return size.
Add a minimum of 4” to the Face Width and 2” to the Returns of any under treatment measurements. Standard Return sizes are ¾”, 1”, 1 ½”, 2 ½”, 3 ½”, 5 ½”, 7 ¼”, 9 ¼”, 11 ¼” – Not using standard return sizes will result in
added cost – See Additional Charges.
Lambrequins are fabricated in 1 piece: Center – any Finish Length up to 24” – Legs up to 96” – Specify short point for (L8202)
– Specify width of legs also.
Lambrequin will only be hinged if necessary for transport or at customer request – see Additional Charges pages.
Top & Bottom cord included in price – Advise if self, contrast cord or cord with lip.
Cost of Lining included
Cutting Allowance - See Chart
Trim Prices Horizontal Vertical______
One Row Fringe or Braid L111 $10.00 Ft. L331 $ 70.00 Ea. Row
Ruffle or Fabric Band L211 $15.00 Ft. L431 $105.00 Ea. Row
Finished Width 36 48 60 72 84 96 108 120 Each
Row ↓ Vertical
1 ¼
Sides L8201 $486 $540 $594 $648 $702 $756 $810 $864
up to 36” L8202 $630 $700 $770 $840 $910 $980 $1,050 $1,120
Long Yards 4 4 5 5 5 5 6 6
Sides L8201 $594 $648 $702 $756 $810 $864 $918 $972
1 ½ up to 48” L8202 $770 $840 $910 $980 $1,050 $1,120 $1,190 $1,260
Long Yards 5 5 6 6 6 6 7 7
Sides L8201 $702 $756 $810 $864 $918 $972 $1,026 $1,080
2 up to 60” L8202 $910 $980 $1,050 $1,120 $1,190 $1,260 $1,330 $1,400
Long Yards 5 ½ 5 ½ 6 ½ 6 ½ 6 ½ 6 ½ 7 ½ 7 ½
Sides L8201 $810 $864 $918 $972 $1,026 $1,080 $1,134 $1,188
2 ¼ up to 72” L8202 $1,050 $1,120 $1,190 $1,260 $1,330 $1,400 $1,470 $1,540
Long Yards 6 6 7 7 7 7 7 7
Sides L8201 $918 $972 $1,026 $1,080 $1,134 $1,188 $1,242 $1,296
2 ¾ up to 84” L8202 $1,190 $1,260 $1,330 $1,400 $1,470 $1,540 $1,610 $1,680
Long Yards 7 7 8 8 8 8 8 8
Sides L8201 $1,026 $1,080 $1,134 $1,188 $1,242 $1,296 $1,350 $1,404
3 up to 96” L8202 $1,330 $1,400 $1,470 $1,540 $1,610 $1,680 $1,750 $1,820
Long Yards 8 8 9 9 9 9 10 10
Finished Trim Yardage
L8201 - Horizontal ¾ 1 ¼ 1 ½ 1 ¾ 2 ¼ 2 ½ 2 ¾ 3 ¼ Trim
Finished Trim Yardage
L8202 - Horizontal 1 ½ 3 4 ½ 6 7 ½ 9 10 ½ 12 Ydg
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
=====================================Sunburst - Specialty Dept. Page 69
Always check “Additional Charges” pages (See Introduction Section)
Specifications – Board Mounted
Recommended lightweight fabric.
Must use Overall Width (Face Width + 2 Returns)
Must send a template.
Width over 90” or height over 90” – Need Estimate.
Back of Sunburst is NOT covered. 2 ½ - 3 inches of wood will show on inside mounts – frame is painted white before attaching
fabric.
Rosette is included in price - Must specify if needed.
Cost of Lining not included, use same yardage as product.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
If outside mount and return is needed add: Up to 60” - $151.20 to cost. – Up to 90” - $226.20 to cost.
If Rouching is desired must send in additional 1 yard of fabric for Sunburst and 2 yards of fabric for 360° Sunburst.
Standard Rouching is 2 inches with 2 ½ Fullness.
Cutting Allowance – See Charts Below
Trim Prices
L201 Rouching at Edges ---- $15.00 Ft.
Diameter 30 36 42 48 54 60 66 72 78 84 90
Yardage 48” & 54”
3 ½ 4 4 ½ 5 10 ½ 11 ½ 12 ½ 13 ½ 14 ½ 15 ½ 16 ½
Yardage 118”
2 2 2 ¼ 2 ½ 3 ½ 4 4 4 ½ 7 ¼ 7 ¾ 8 ¼
L201-
Rouching $60.00 $75.00 $90.00 $97.50 $112.50 $120.00 $135.00 $142.50 $157.50 $172.50 $180.00
* Can be made Round or Oval
Diameter 30 36 42 48 54 60 66 72 78 84 90
Yardage 48” & 54”
7 8 9 10 21 23 25 27 29 31 33
Yardage 118”
4 4 4 ½ 4 ½ 7 8 8 9 14 ½ 15 ½ 16 ½
L201-
Rouching $120.00 $150.00 $180.00 $195.00 $225.00 $240.00 $270.00 $285.00 $315.00 $345.00 $360.00
L8350 - 360° Sunburst – Up to 36” Diameter $ 773.00 /Ea
L8351 - 360° Sunburst – Up to 48” Diameter $ 968.00 /Ea
L8352 - 360° Sunburst – Up to 60” Diameter $1,161.00 /Ea
L8353 - 360° Sunburst – Over 60” Diameter $1,937.00 /Ea
L8301 – Sunburst to 60” Wide $773.00 /Ea
L8302 – Sunburst to 90” Wide $968.00 /Ea
2019 Custom Classics - Always check “Additional Charges” page for up-charges 2/15/2019
L8401 - Sunburst w/ Header & Rosette Up to 36” Wide $630.00 /Ea
L8402 - Sunburst w/ Header & Rosette Up to 60” Wide $801.00 /Ea
L8403 - Sunburst w/ Header & Rosette Up to 82” Wide $975.00 /Ea
================================Sunburst - Specialty Dept. Page 70
Always check “Additional Charges” pages (See Introduction Section)
Specifications Recommended lightweight fabric.
Must use Overall Width (Face Width + 2 Returns).
Must send a template.
Fabric attached to rod and must be mounted on job site.
Not mounted but the cost of the hardware is included in the price.
Standard pocket size is 2” and standard Header is ½”.
Cost of Lining not included, use same yardage as product.
If Inside Mount is requested, the workroom will deduct ½” unless otherwise specified.
Maximum width is 82” - maximum height is 41”.
Rosette included in price.
Not recommended for Round or Oval.
Cutting Allowance – See Chart Below
Fabric Width 48” 54” 118”
Small – 36” 2 ½ 1 ½ 1 ½
Medium – 60” 4 ½ 4 2
Large – 82” 8 6 ½ 4