BMW X3 F25 03/14 >> BMW X4 F26 07/14 >>

750061

Installation instructions

Reference: The following information must be reviewed before beginning the assembly:

The installation instructions are to be thoroughly read. The installation should be carried out by qualified personnel with the relevant technical knowledge. The vehicle manufacturers' current technical notices and information on retrofitting must be followed. The removal and replacement instructions found in the current repair manuals must be followed. It must be ensured that the vehicle is technically suitable for the installation of a trailer hitch.

For the fitment instructions for other models covered by this part go to http://

www.erich-jaeger.co.nz/Solutions/Solutions-BMW.html

orScan this QR code

750061-140116B8 2 / 20

KIT

TOOLS

750061-140116B8 3 / 20

1

750061-140116B8 4 / 20

2 ROUTING

750061-140116B8 5 / 20

3 REMOVE

750061-140116B8 6 / 20

4

750061-140116B8 7 / 20

5

750061-140116B8 8 / 20

6 � 19

��

��

��

���

���

750061-140116B8 9 / 20

7 � 19

��

��

��

���

���

8

��

��

��

���

���

��

��

��

���

���

750061-140116B8 10 / 20

9 � 24

10 � 19

OPTION 1

11 - 12

14 - 27

OPTION 2

13 - 27

750061-140116B8 11 / 20

11 OPTION 1 � 19

12 OPTION 1 � 19

750061-140116B8 12 / 20

13 OPTION 2 � 19

����

����

����

����

750061-140116B8 13 / 20

14 � 19

15

750061-140116B8 14 / 20

16 � 16

17

750061-140116B8 15 / 20

18 � 19

1 ye 2 bk 3 wh 4 gn 5 bu 6 rd 7 bn

19 bk wh gy gn rd bu ye bn pu or no

black white grey green red blue yellow brown purple orange not

occupied

750061-140116B8 16 / 20

20 OPTIONAL � 19

21

750061-140116B8 17 / 20

22 CHECK ALL LIGHTING FUNCTIONS

23 CHECK BULB OUT DETECTION

24 � 9

20 A

750061-140116B8 18 / 20

25

12

750061-140116B8 19 / 20

26 CHECK PDC

27

750061-140116B8 20 / 20

27 CODING

Subject to change in terms of construction, equipment and colour, and may contain errors. The information and illustrations are non-binding.

BMW Service ISTA/P Initialize Trailer Module

Please effect coding as follows:

• Connect computer to vehicle • Start ISTA/P • Click “Modification / Upgrades” • Scan Action plan • Click „Coding (Ethernet)“ • Scan Action program follow-up • Final report checking

After the effected connection, the rear park assist system will also automatically be deactivated in trailer operation!