326

www.touratech.de/bmwr11xxgs

BMW R1150|1100GS

special parts

1

2

3

4

5

6

7

Pic.: Matthias Hirt | Alps

Handlebar|Cockpit from page 328

Seat from page 343

Suspension from page 345

Protection|Lighting from page 348

Tail rack bag from page 359

Foot pegs/hand gear from page 353

Case systems from page 362

BMW R 850/1100/1150 GS327

www.touratech.de/bmwr11xxgs

1

2

3

4

5

6

7

special parts

329328

Fairing DESIERTO 3 forBMW R 1150 GS/Adventure * black *

Facelift your BMW R1150 GS / AdventureThe Desierto 3 fairing was originally designed for the R1200GS Boxer.

Many years of positive feedback from our Desierto 3 customers encouraged us to make

this fresh and dynamic look available for our BMW R1150 GS / Adventure customers.

The toned screen can be completely adjusted to the riders personal preferences.The windscreens height, inclination as well as the distance from the fairing can be adjusted quick and efficient with a standard size 10 spanner to suit any situation. Airflow on both sides of the

windscreen minimises turbulences coming from the edge of the screen, practically

eliminating buffering and annoying wind noise.

040-0394

BMW R850/1100/1150GS329328

Fairing “Desierto II” BMW R 1150 GS / Adventure

Beautiful cockpit fairing for BMW R 1150 GS. Looks great, works great.- Made from GFK- Tinted screen- Mini indicators included- Original headlights and instruments are retained- For use with the original fuel tank or our 41 litre tank - No vehicle modifications necessary - Comes unpainted

040-0395

BMW R 1150 GS / Adventure V100 Cockpit

It doesn‘t have to be a complete Desierto II refit but when you fancy having a new cockpit or because of your Roadbook tours a road book holder is indicated, we have something new for you with this cockpit conversion. It consists of the cockpit base plate (with all the fittings) prepared for use with an IMO100R/ 100R300/ 100R Sport as well as an RB TT or RB TT carbon roadbook holder. If you don‘t already have it you will also need:- an IMO - an RB TT or RB TT carbon - a sport control lamp unit

040-4220

Fairing, cockpit

331330

„Desierto I“ fairing BMW R 850 GS/R 1100 GS

A new look for your BMW R 1100 GS / R 850 GS:Perfect cockpit fairing for street and off- road use. The cockpit fairing includes- DE Projector headlights- Tinted screen- Original instruments can be retained.Can be used with original fuel tank or our 41 litre tank. Fairing comes unpainted.Installation does not require any major modifications of the bike.

040-0295

BMW R850/1100/1150GS331330

Headlight Cover “Desierto II”

There is also a headlight cover available for the ‚Desierto II‘ twin headlights. Devised for off-road rid-ing, it is made from rugged Macrolon and protects the headlighst against damage from flying stones.The headlight cover does not come with a German TÜV Type. Approval is not street legal in Germany.

040-0285

Bags for “DESIERTO I and II” fairing

Now there is a bag set available that fits the Desierto fairing. These bags have been especially made for the Desierto, fit perfectly onto the fairing and make optimum use of the “hollow spaces”.

055-1100

Stickers on transfer foil for your „DESIERTO”

The kit includes:2 x ‚TOURATECH‘ stickers (big) for side fairing2 x ‚Triangle‘ stickers (big) for tank2 x ‚DESIERTO‘ stickers for tank2 x ‚Triangle‘ stickers for tank and screen

101-0290 black101-0291 white 101-0292 red101-0293 blue101-0294 yellow

Fairing, headlight cover

333332

Headlight cover BMW R 1150 GS / Adventure

Optimum protection of the lamps against flying stones Durable, non-breakable, shatter- proof, near-ly invisible headlight cover; vehicle design remains unchanged; existing fairing bolts are used for fitting. Mounting kit includes long screws and spacers for easy installation. The headlight cover has not been type-approved by the German TÜV and must not be used on public roads.

040-0330 Polycarbonat (clear plastic)040-0331 Steel grille

Headlight cover BMW R 1100 GS / R 850 GS• Optimum protection for the fragile lamp glass

against flying stones.• Existing fairing bolts are used for fitting. • Mounting kit includes long screws and spacers

for easy installation. Fits standard headlights and our twin headlights.

• Cannot be used in conjunction with certain accessory windscreens.

• The headlight cover has not been type approved by the German TÜV and must not be used on public roads.

040-0383 Steel grille

BMW R850/1100/1150GS333332

High windscreen BMW R 1150 GS (from 2001)

Very good wind and enclosure for the R 1150 GS.

041-0004

Windscreen spoiler Adventure / R 1150 GS / 1100 GS / 850 GS

Some R1100 / 1150 GS / Adventure drivers complain about heavy airflow behind the wind-screen. The upright riding position on the GS may be one reason for this. We have tried to ease this problem: With this spoiler the windscreen is approx. 8 cm higher. PLEASE NOTE: For use with original windscreen only!

040-1310 R 1100 GS

040-1320 R 1150 GS

040-1350 Adventure

Spoiler for original BMW hand protectorsBMW R 1150 GS / Adventure

Very useful accessories for the GS-biker. Optimal hand protection for the original protectors. Very useful and pleasant in rain, snow, hail and cold. Easy to fix by drilling two small holes through the protector. The spoilers are made out of resistant and light synthetic. Colour: blackSpoiler for orginal protektors

040-1701 black

Handlebar, windscreen, headlight cover

335334

Hard part LA - steering stop R 850 / 1100 GS

The steering stop is also prone to break after a heavy fall. In case of extreme stress on the handlebars, the steering stop breaks.It is a time-consuming and quite expensive job to replace the yoke...Our solution:- Made of aluminium and durable Delrin - Additional rubber buffers - Easy to mount - Double coating for the SilverLineFor those among you who don‘t want to worry about bike repairs after a heavy fall...

040-1302 yellow

040-1312 silver

Hard part LA - steering stopR 1150 GS / Adventure

The steering stop of the R1150 GS can break from a heavy fall: In case of extreme stress on the hand-lebars or front wheel, the steering stop can break off, sometimes damaging the frame stop as well and the fork legs. The fork may also damage the tank leaving ugly dents. The 1150 brake line can be caught between the fork leg and telelver and is likely to get damaged. If so, forget about riding home. The hard part LA for R1150GS comes with a brake line support, too. The SilverLine matches BMW silver with clear coat.

BMW R 1150 GS040-1303 yellow

040-1313 silver

BMW R 1150 GS Adventure040-1307 yellow040-1317 silver

Hand Protectors R 850/R1100 GS 040-0520(black)

Hand Protectors R 1150 GS 040-1520(black)

Spoiler for Hand Protectors 040-0570 black

Spoiler large for Hand Protectors 040-1570 black

BMW R850/1100/1150GS335334

040-7301

040-7031

Touratech hand protectors BMW R 11XX GS

- Optimum lever protection (brake and clutch levers)- Optimum protection for your hands- Robust even at high speeds- Good wind deflection (with spoiler)- Elegant design enhances the enduro looks- Many colours available- Colours of hand protector and spoiler may be different- Hand protector colours: black (1), yellow (2,) blue(3), red (4), white (5)When ordering, please substitute the X on the end of the order number for the number in brackets.

R 1100/850 GS 040-702X with series handlebar 040-662X with aluminum handlebarR 1150 GS/Adv. 040-703X with series handlebar 040-663X with aluminum handlebar

Spoiler for Touratech Hand Protectors GD 040-730X

Handlebar risers R 850/1100/1150 GS and Adventure

- For an upright and relaxed riding position- Less strain on shoulders and wrists- For sports riding: Better standing, less exhaustive riding- Better handling- Black powder coating- Handlebars 25 mm higher

040-0265

Special screw screw-set2x M8 x 65 with M5 thread Special bolts with internal M5 thread. Two kits required to install handlebar risers (040-0265) with BMW original Fog lamp switch on R1150GS Adventure.

040-0272

Cockpit, handlebar

337336

Folding brake lever + clutch lever set, R11XXGSOur brake and clutch levers are made from high-strength aluminium and have multiple adjustment settings. This enables the grip width to be set individually. Having the lever in the right position for your hand size and the way you ride means fatigue-free riding even on long journeys and challenging roads.The additional folding function together with the defined, predetermined breaking point ensures maximum safety and allows you to continue riding even after a fall.

040-5645 black040-5646 silver

Kaoko Cruise Control, mechanical cruise control,BMW 850GS/ R 1100 GS / R1150 GS / ADVThe original by the South African inventor!The cruise control replaces the original handlebar end weights. The anti-slip knurled screw secures theaccelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gently - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle.Despite that, the motorbike decelerates in a gentle and controlled way. This item is illegal in road traffic in Germany and could be dangerous if used incorrectly. We are unable to accept any responsibility for it.Used at the owner’s/rider’s own risk.

330-0001

Side panel set for BMW R 850/1100/1150 GS

When BMW presented the new R1100GS to the pu-blic in 1993, we were convinced that the side panels had not been available yet. But since then nothing has happened and the motorcycle continues to be delivered without side panels. What you see instead is an ugly brake fluid reservoir and a mass of wires. Our new side panels solve the problem.Makes the color scheme of the bike complete by using BMW-specific original colors to match the rest of the bike. Easy to mount by simply removing the seat and snapping into place.

Side panels (set) R 850/1100/1150 GS040-2481 black

Side panels (set) R 850/1100/1150 GS040-2483 white

Side panels (set) R 850/1100/1150 GS040-2484 red

BMW R850/1100/1150GS337336

Decal set forkR 1150 GS/ADV Absolutely strong, thick film protects the fork against stones and other types of damage.Black film with white print.Very easy to apply - strong adhesive.

100-0504 (for both sides)

Side panel set for sport seat BMW R 850/100/1150 GS and R 1150 GS Adv.

The wiring and brake fluid container of the R850GS, R1100GS, R1150GS and Adventure have never been covered.We have designed side panels to solve this problem. Side panels are now also available for our sport seat! The side panels are already painted in the original colors. The side panel is fastened with a screw.

Side panel set for sport seat R 850/1100/1150 GS040-2581 black

Side panel set for sport seat R 850/1100/1150 GS040-2583 white

Side panel set for sport seat R 850/1100/1150 GS040-2584 red

Side panel set for R 1150 GS Adventure040-2681 black

Side panel

339338

Additional Xenon and fog headlightsR 850 GS/1100 GS/1150 GS/Adv./Desierto I/II

Due to the excellent lumen output of Xenon bulbs, the light emitted reaches further and the illumination of the road is much better. Also, the light produced by Xenon bulbs more closely resembles the colour of natu-ral daylight, resulting in better visibility, increased comfort, and increased safety in night driving conditions.High Intensity Discharge lighting uses a Xenon gas bulb to produce the intense white light with an electric arc. There is no filament; the arc is created by igniting a mixture of inert gas and metal salts with approxi-mately 20,000 volts. Consequently each Xenon lamp includes a transformer unit with a high-voltage cable and special brackets. Xenon lights produce a much higher luminous flux (3200 Lumen instead of 1500 Lumen) than conventional halogen lights. For more than double the light output it consumes only 35 watts of electrical power (compared to 55W+).Compared to halogen bulbs that give off light with a yellow tint, Xenon bulbs produce light with a slight bluish tint. Better visibility results in greater safety and comfort when driving, especially in bad weather conditions.The Xenon headlight kit includes brackets, transformer, cables and relay. There is no switch - the Xenon lamp is activated automatically with the high beam.The fog headlight can be fitted as a single light, or in a pair. The wide, low fog beam of the 55W halogen allows much safer driving when it is raining or snowing. The fog light housing matches our Xenon head-light. The head-lights include a German TÜV Type Approval and need not be registered.

Xenon Auxiliary Headlight - leftR 850/1100 GS/Desierto I040-1500R 1150 GS/Adventure/Desierto II040-1503Additional fog headlightR 850/1100 GS/Desierto I040-2000 - right040-3000 - left

R 1150 GS/Adventure/Desierto II040-2001 - right040-3001 - left

Includes German TÜV Type Approval and needs not be registered.

Beam pattern: XENON headlights

Beam pattern: Halogen Headlights

BMW R850/1100/1150GS339338

And it became light...Integral Xenon main beam headlightfor BMW R 1150 GS / Adventure

Now finally available as an integral headlight which retains the original lookDue to the excellent lumen output of Xenon bulbs, the light emitted reaches further and the illumination of the road is much better. Also, the light produced by Xenon bulbs more closely resembles the colour of natu-ral daylight, resulting in better visibility, increased comfort, and increased safety in night driving conditions.High Intensity Discharge lighting uses a Xenon gas bulb to produce the intense white light with an electric arc. There is no filament; the arc is created by igniting a mixture of inert gas and metal salts with approxi-mately 20,000 volts. Consequently each Xenon lamp includes a transformer unit with a high-voltage cable and special brackets. Xenon lights produce a much higher luminous flux (3200 Lumen instead of 1500 Lumen) than conventional halogen lights. For more than double the light output it consumes only 35 watts of electrical power (compared to 55W+).Compared to halogen bulbs that give off light with a yellow tint, Xenon bulbs produce light with a slight bluish tint. Better visibility results in greater safety and comfort when driving, especially in bad weather conditions.The Xenon headlight kit includes brackets, transformer, cables and relay. There is no switch - the Xenon lamp is activated automatically with the high beam.Cannot be combined with the additional Xenon main beam headlight.

040-4601

BMW R 850/1100 GS dual headlightDE dipped headlight and DE main beam light

Stop making compromises.Stop using these bus-like headlights.A brilliant combination of a stylish look, high quality and high-tech. DE dipped headlight for optimum illumination. Tested on our ReVamp, now available as a retrofit for the 850/1100GS. Can be fitted together with the additional Xenon / Fog headlights.- no german TUV Type approval required: construction type approval- 2x 55Watt H7-socket

040-1214

Lighting

341340

Flash Back LC

Sophisticated upgrade for your BMW indicator system. With the Flash Back LC you will no longer have to press the indicator reset button. Simply keep the (left or right) indicator button pressed when getting round turns (more than 0.5 seconds). When releasing the button, the indicator is reset automatically. This is parti-cularly helpful when riding on the motorway or getting around roundabouts.

By pressing the indicator button once shortly, the indicator will go on as usual and can be decativated with the reset button. In addition to the above func-tion, you can deactivate the indicator by pressing the relevant indicator button twice shortly.A huge gain in comfort!No expensive installation, no electrical knowledge necessary. The small unit, fitted with a processor and other components, is simply placed between the indicator unit relay connectors.Not suitable for motorcycles with CAN-bus!

011-2002

BMW R850/1100/1150GS341340

Dirk

Sch

äfer

| S

pain

Rear light Conversionfor your BMW R 850/1100/1150 GS and Adventure, now with a LED version.

A completely new tail look!Delivery includes a black-coated number plate holder and all the prescibed lights, i.e.:- Dual rear lights (= double security if one light breaks down)- Number plate illumination- Standard rear reflector As all parts have an approval sign, they need not be registered!

040-0276 Rear light conversion

040-3176 Rear light conversion LED

Mini indicators

Very small dimensions Bulbs provided Flexible stalk.Also fit the following models:BMW R 1150 GS/AdventureBMW R 1100 GS and BMW R 850 GS

040-0207 FR or RL

040-0208 FL or RR

FR= front right RR= rear rightFL= front left RL= rear left

Lighting, indicator

343342

m a d e b y

41 Litre Tank

Our tried and true 41 Liter fuel tank for the R 850/ 1100/1150 GS. Elkamet has manufactured our tank since 2000 and it is perhaps the toughest tank on the market. It is made of polyamide nylon, a material developed for it‘s impact resilience, commonly used for modern automotive bumpers. Capacity is 41L but with the original amount of 22L of fuel it adds only 5kg to the motorcycle, but the fuel rides LOWER on the motorcycle, increasing stability most of the time, and you don‘t have to keep it full.But full, you can ride 700 kms (400mi) or more! This true long distance / touring tank gives you OPTIONS on the road. You can choose your destination with little regard to availability of fuel.It is supplied unpainted, and it fits the original mounting. The package includes all mounting hardware. The original BMW filler cap and pump assembly are used. The RID and fuel warning lamp work with the large tank. A German TÜV Type Approval is included.

100-0010

Sticker a piece

Size: 28 cm x 6.6 cm Colour: red / black

100-0070 “R 1150 GS”

100-0071 “R 1100 GS”

100-0072 “R 850 GS”

Tank guard R 1150 GS Adventure

When the R1150GS Adventure is used as it was designed, minor bumps or falls can leave unsightly scrapes on the extended lobes of the steel tank. Textured black plastic protectors withstand moderate hits, preventing scratches and minor dents. The protection is contoured perfectly to the tank and compliments the Adventure look. Color: black

040-1318

BMW R850/1100/1150GS343342

Sports Seat R 850/1100/1100 GS

The integral bucket shape seat platform of our sports seat guarantees comfortable long distance riding.The design in grey/black emphasises the stylish „enduro look“.

055-2185 Sport seat standard height 055-2186 Sport seat high 055-2187 Sport seat low

055-2188 Sport seat extra high

055-2189 Sport seat extra extra high

When converting the R 1100 GS the original seat very often spoils the new look. Many R1100 GS riders also need more height choices. Now we offer a beautiful, elegant sports seat, available in five different heights: Standard: 860 mm High: 890 mm Low:840 mmExtra high: 920 mmExtra extra high: 940 mm

Adv seat extension

The Adventure seat is simply not long enough for your pillion passenger. We have developed an easy to fit seat extension which solves this problem. Now even long-distance journeys won´t be a horrifying experience for your pillion passenger. It can be fitted quickly and includes a new grab handle. This seat extension is a must if you want your pillion passenger to enjoy a comfortable ride.

055-2110

Single seat R 850 / 1100 / 1150 GS

This seat also features a full bucket shape seat plat-form for comfortable long distance riding.For the original tank and 41 litres tank.

055-0090

Seat, tank

345344

Hard part GS *Neoprene fork protectors*

These fork protectors give utmost protection to the stanchion of the telelever forks. Forget about damage caused by flying stones, dust or mud. Our new fork protectors are made of soft neoprene and mount without tools. They are wrapped around the sensitive parts of the fork, fastened with Velcro and fixed.

040-1304

Comfort seat BMW R850GS, R1100GS, R1150GS (not Adventure) Feel the difference! The GS models in the first 4V generation have brought their owners much joy over many miles, yet a

significant discomfort creeps in over longer distances. Rider and passenger experience cramps, mys-

terious backaches, and pains in their knees and coccyx. Worn, aged or sagging foam in the original

seats is often to blame. Once the initially positive characteristics such as seating comfort, elasticity,

optimal hardness and riding position start to deteriorate, it‘s high time for a new seat for the rider and

pillion passenger to restore riding enjoyment! We offer the „better“ seat for the R850GS, R1100GS

and R1150GS (not Adventure): anatomically optimised, in a range of heights, with a high-strength

foam core and non-slip, bi-elastic, waterproof „sand effect“ covering material. The outstanding

characteristics of these comfort seats exceed even new, original seats and put the enjoyment back into

riding the GS!

041-5901 Comfort seat for rider „standard“ 041-5902 Comfort seat for rider „high“ + 3 cm 041-5900 Comfort seat for rider „low“ - 3 cm 041-5907 Comfort seat for pillion „standard“

Comfort seat *Breathable*The breathable seat offers tremendous advantages over the standard one, especially at high temperatu-

res. It enables the air to circulate inside the seat, which efficiently eliminates perspiration in the seat area.

This in turn helps to prevent the underclothing from sticking and wrinkling. The innovative padding has

a special recess which significantly increases the seating comfort, and the hard-wearing outer material

copes easily with even the toughest conditions.

041-5904 Comfort seat for rider „standard“ 041-5905 Comfort seat for rider „high“ + 3 cm 041-5910 Comfort seat for pillion „standard“

BMW R850/1100/1150GS345344

Illustration similar

Seat, Suspension

BMW Typ: Level 1 Level2

R1100 GS (rear) 040-5860 040-5880

R1100 GS (front) 040-5875

R1150 GS (rear) 040-5862 040-5882

R1150 GS (front) 040-5877

R1150GS Adv. (rear) 041-5860 041-5862

R1150GS Adv. (front) 041-5875

Touratech Suspension R 1150/1100 GS & Adventure:

Many Advantages to Other High-End Brands

Touratech Suspension has been designed by Tractive Suspension. Tractive has specific, profound exper-tise of the Toura-tech type of motorbike models. As an example, the people at Tractive designed most of the shocks used by BMW Motorrad since the last 10 years. They therefore understand the specific user and reliability requirements as no one else does.

The shocks were developed for traction, comfort, dynamic safety, reliability and light weight. Every shock has been test driven with Touratech customers in mind. The shocks have been succesfully tested on durability 4 times stricter than the original BMW standards. Last but not least every shock design has been tested by theTouratech experts in Enduro use during the 2011 season.

Detailed information on

Touratech suspension and available variants can

be found starting on page 1242 !

347346

Y- piece replaces front silencer w/o ABE R 1150 GS

The second problem that exists with the original exhaust is that you cannot use it on long distance travels as you don‘t get unleaded fuel wherever you go. The Remus exhaust can be used with or without catalytic converter. The front silencer can be exchanged so that you can decide whether you want to fit a catalytic converter (KAT) or not.The new R1150GS features a front silencer separa-ted from the rear silencer. Thus you can either repla-ce the front silencer (w. or w/o catalytic converter) or the rear silencer (for a better sound and look).All parts are interchangable.

040-3202Set Revolution SD silencer Alu from Remus and connection pipe

040-3306

Öhlins‘ shock absorbers

are the best that you can fit to your motorbike‘s chassis.We have tested many different shock absorber systems and have come to the conclusion that Öhlins‘ shock absorbers are the first choice. Since then all our motorcycles have been fitted with these shock absorbers. This refit has improved the chassis considerably (when front and rear match). All Öhlins‘ shock absorbers work on the „de carbon“ principle. There are several different types of shock absorbers that have been specially adapted to the corresponding motor bike. The reason why Öhlins‘ shock absorbers work so well is their precision!

BMW R 1100 GS/R1150 GS front Type 46ER1 040-0418BMW R 1100GS rear Type 46DR1S 040-0405BMW R 1150GS rear Type 46DR1S 040-0419BMW R 1150GS rear( with harder 160 spring) Type 46DR1S 040-0429BMW R 1150 GS Adv front Type 46ER1 040-0448BMW R 1150 GS Adv rear Type 46DR1S 040-0447BMW R 1150 GS Adv rear( with harder 160 spring) Type 46DR1S 040-0406

BMW R850/1100/1150GS347346

REMUS

2rtw.com

REMUS Revolution rear silencer aluminium R1150GS with ABE 040-3301Weight: 3,4 kg

REMUS Revolution rear silencer carbon R1150GS with ABE 040-3302Weight: 3,0 kg

shock absorbers , Rear silencer

349348

Pic. M. Hirt

Manifold guard, flexibleBMW R 850 / 1100 / 1150 GS + ADV

This heat shield is made from laser-cut stainless steel. Thanks to the special construction, it can easily be adapted to any manifold shape.Not only does it provide heat protection, but it also protects the endangered points of the exhaust system against stone-chipping or in the event of a fall.- supplied with: 2 pce., including 4 collars

048-0132

Exhaust manifold cover R 1100 GS/R 850 GS

- Rugged manifold protection cover- 2 mm anodised aluminium plate- For right side- Covers the blue / brown manifold and protects the boots

040-3150

Exhaust manifold cover R 1150 GS/Adventure

- Rugged manifold protection cover- 2 mm anodised aluminium plate- For right or left side- Covers the blue / brown manifold and protects the boots

040-3151 left

040-3152 right

BMW R850/1100/1150GS349348

Pic. M. Hirt

Manifold Guard, Cylinder Guard

Ceramic Clutch

Since the trip report about Mongolia and the BMW R 1100 GS „Monsterkuh” at the latest, you will know about the problem: In the long run, the clutch of the R 850 GS/R 1100 GS/R 1150 GS does not stand the extreme stress of off-road or sports riding and can break down completely within a few seconds. Frequent acceleration and driving at high speed on narrow and steep mountain roads is like an endurance test for the clutch which starts getting hot quickly. Most long distance travellers riding one ofthe above models will be able to tell you, at least roughly, how to change the clutch or where you will find the next workshop.The ceramic clutch has been developed in Africa for use on Africa‘s extreme trails and for off-road trips. Since its introduction it has proved to be reliable. The ceramic clutch is much more durable and can be used under more extreme conditions than the original clutch. Even when climbing uphill on narrow tarmac roads with heavy luggage the clutch will work perfectly. Until now, not a single clutch has broken down!

- 1.8 mm laser-cut stainless steel- 8 ceramic friction plates (riveted)- Racing technology- Tried and tested in South Africa for many years and On tracks world-wide - Clutch does not longer overheat under extreme conditions.- Excellent workmanship and exacting tolerance- It normally does not break during the „LIFE OF A MOTORBIKE”

Ceramic clutch R 1100 GS040-0350Ceramic clutch R 1150 GS040-0351

Aluminium cylinder guard R 850 GS/1100 GS/1150 GS/Adv & R 850 R/R 1100 R/R 1150 R

It has proved to be very reliable when riding thousands of kilometres on off-road tracks. The 4 mm strong aluminium guard buckles in the event of a fall and thus takes up much of the impact energy. The cylinder is well protected against scratches and damage. In addition to this, it further enhances the Boxer look. Highly recommended when riding off-road.

051-0508

351350

Carbon brake cylinder guard for R 1150 GS / Adventure

Finest design combining functionality and protection.Protects the brake cylinder, rubber sleeve and brake line connections perfectly from damage caused by the boots. Especially when riding upright or wearing cross boots, the carbon brake cylinder guard is an important accessory.

040-1011

Small engine guard

As requested, we have designed a smaller and less bulky engine guard. Although it features smaller front and side parts, it still provides reliable protec-tion for the oil sump. When fitted to stripped motor-cycles (e.g. ReVamp) without engine guard bar it enhances the more delicate look.Used if there is no engine guard bar.

small engine guard 040-1276 R 850/1100 GS

small engine guard 040-1275 R 1150GS/1150 GS Adv

Sump guard R 1150 GS/R 1100 GS/R 850 GS

Our sump guard protects the centre stand and the front silencer against damage from stones or other objects protruding from the ground when riding off road. As the sump guard plate is bent upwards, it prevents sand and dirt from penetrating the space between the engine and the gearbox, so it protects the crankshaft seal from dirt and increases its life considerably. Our sump guard mounts to the centre stand with four clamps. The rubber elements on the clamps provide vibration isolation. The plate is CNC machined from 4 mm aluminum.The engine guard extension was deliberately manufactured without holes or cut outs to maintain the motorcycle‘s „slip“ on rocky tracks when riding off-road.

040-1251 R850/1100GS (Aluminium)

040-1252 R1150GS (Aluminium)

040-1255 Adventure (Aluminium)

BMW R850/1100/1150GS351350 Engine guard, Crashbars

Crashbars

For enduro riders falls are part of the game. The rider is well protected,but what about his bike? We have developed crashbars for the R 850 GS/R 1100 GS/R 1150 GS and Adventure that really protect the motorbike. Rugged mounts attach to the bike in 6 places. Two cross-bars take the lateral forces. Steel, available in black only. The crashbars have a stepped joint below the crossbar. To carry out any maintenance work on the motorcycle, only two screws have to be removed. Removing the entire crashbar is not necessary.

Crashbar R 1150 GS051-0509Crashbar R 1150 GS Adventure051-0505

Oil filler cap with hexagonal screw BMW R 850/1100/1150 GS also R 1100 RT

Replaces the original oil filler plug on the left cylinder. Protects against theft and vandalism as this plug can only be opened using the 7mm allen key (provided). CNC turned aluminium.

040-0282

353352

Oil cooler guard R 850 GS/R 1100 GS/R 1150 GS/Adventure

- Rugged aluminium guards protect the delicate oil cooler on the BMW R 1100 GS/R 850 GS or BMW R1150 GS- 1.5 mm anodised aluminum- Easy fitting, no bike modifications needed040-0288 R 1150 GS/Adventure040-0279 R 850 GS/R 1100 GS040-0277 R 1150 GS/Adventure black040-0278 R 850 GS/R 1100 GS black

Locking Oil Filler Capfor all new BMW boxer engines (R259 and R21)

Stolen oil filler caps are a thing of the past.No special tool required: easy to operate using a small unobtrusive key.Fits all 4V boxer engines including dual plug.- High-quality workmanship- High-quality brand lock- Can be keyed to match our integral pannier locks

040-0292

Hard Parts GV R 1100 GS

The BMW R1100 GS has several weak points which prevent enduro riders from riding the bike under extreme off- road conditions. Here is the solution.Problems occur when the workload on the rear frame is too high, i.e. After a jump or when riding with heavy luggage. The rear frame mount on the gear- box casing simply cracks.Another weak point is the footpeg mount. Under extreme stress it may break the gearbox casing; i.e. when dropping the motorbike onto the footpegs or after a fall. When mounting our parts - we refer to these as hard parts - frame problems will belong to the past:- Material: 4 mm steel (ST 52)- Laser- cut- Galvanised- Plastic- coated (yellow)- Mounting hardware provided- Double coating for the SilverLineAnd enduro enthusiasts will enjoy riding the BMW R 1100 GS again...

040-1301 yellow

040-1311 silver

BMW R850/1100/1150GS353352 Radiator guard, oil cap

Adjustable gear leverR 850 GS/1100 GS

The adjustable gear lever is used to its best advan-tage with the adjustable foot rest or simply if the position of the original gear lever is not suitable.With this gear lever too the front lever has a spring to en-able it to fold thus reducing damage should you fall off.In addition, the forces acting on the gear lever will be transferred less strongly to the selector shaft. Should the folding gear lever get a little bent out of shape it can be straightened again very easily.

041-0635

Folding brake lever

The brake lever can break even if you just fall. This will make it very difficult, if not impossible, to go any further. With our brake lever you can reduce this risk easily and effectively because of the folding front lever.In addition, the forces acting on the brake lever will be transferred less strongly to the selector shaft. Should the brake lever get a little bent out of shape it can be straightened again very easily.

041-0636 BMW 850/1100 GS

041-0634 BMW 1150 GS

Brake lever extension

You know how annoying it is to miss the brake lever. Our extension offers you a larger support surface and safe pressure on the brake lever.

040-0249 R 850/1100/1150 GS from 9/1997

040-0239 R 850/1100 GS up to 8/1997

Kick stand support extension BMW R 1150 GS

The BMW stands much more firmly even on quite a soft surface with this kick stand support extension. Even if you park the motor bike in a meadow you do not always have to look for a small plank of wood or another base.This practical part is made of a combination of stain-less steel laser parts and anodised aluminium. Quick and easy to fit.

040-3183

355354

Height adjustable footpegs

Now finally these extra-large, four way adjustable footpegs enable you position them according to your needs and to the driver‘s body height.Especially on long-distance trips, the lowest position improves riding comfort considerably as it enables a relaxed riding position.

Footpegs R 850/1100/1150 GS/Adv.041-0631 Adjustable gear lever R 1150 GS/Adv.041-0632 Footpeg and gear lever kit R 1150 GS/Adv.041-0633

Long-distance, relocated front footpegsFor anyone who wears touring boots on long journeys.The footpegs are fitting further forward thus provid-ing optimum distance between the touring boots and the brake lever or gear lever. The wider foot base also allows longer distances to be covered comfort-ably while standing on the footpegs. Material: high-quality stainless steel041-0625

Long-distance, relocated rear footpegsWe have always wanted these footpegs for our long-distance journeys.Everyone knows the problem: If you are wearing enduro boots there is not enough space between them and the brake lever or gear lever. The long-distance footpegs are fitted further back thus providing optimum space for enduro boots. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. Material: high-quality stainless steel041-0626

Footpeg system R 1150 GS (3 cm lower)

- Foot position is 3 cm (down and forward)- Better knee angle- Includes new gear lever- Stainless steel- German TÜV Type approval included- Note: may touch roadway at heavy lean angles.

040-0271

BMW R850/1100/1150GS355354 Footpegs, brake lever

Studded pillion passenger footpegs

For anyone who drives with a pillion passenger through difficult terrain.With the studded rear footpegs the pillion passenger has a firm grip too and does not risk falling off the bike when the going gets difficult. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs.Material: high-quality stainless steel

044-0860

Rallye footpegsR 850/1100/1150 GS and Adventure

These footpegs have proved to be reliable at our rallye events.They offer considerably wider foot base support and also allow longer distances to be covered while standing on the footpegs.These footpegs also provide more grip as the grip studs have very sharp edges.

300-0041 footpegs only

Lower pillion passenger footpegs

The pillion passenger‘s footpegs can be lowered up to 25 mm (2 positions possible) and can be positi-oned in such a way that they stick out more and are located more at the front. This enables a conside-rably more relaxed riding position. Not for adventure with original BMW aluminium panniers.

R 850/1100/1150 GS/Adventurelower pillion passenger footpegs.041-0621

*Works* long-distance foot pegs BMW R850GS/R11XXGS/ADV

• 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots

• Perfect combination of grip and self-cleaning• With a more slender design for better ground

clearance• Significantly less susceptible to impacts• Strengthened mounting point• With a blasted surface and laser inscription for

a superior finish

044-5315 044-5316 (low - 2 cm)

357356

Pic.: Matze Hirt | TT-Electronic Production

Rallye Mudguar R 1150 GS

We have also designed a new Mudguard for the BMW R1150 GS. It is nice and short!Our mudguard combines good design, which will enhance the looks of your bike, with improved usability. It offers maximum front wheel clearance to prevent mud and dirt from blocking the wheel. The mudguard is made from black polypropylene. The support is manufactured from machined aluminium.

040-0223

BMW R850/1100/1150GS357356

Carbon rear wheel cover for R 1150 GS/Adv.

We focused on functionality, of course, but also wan-ted a stylish piece of equipment. The shock absorber is perfectly protected against mud, dirt and stones which increases its life span. As well as the design which matches the front mudguard, the high-quality workmanship and the perfect finish are also eye-catching features.

040-1001

Paralever guardR 850/1100/1150 GS

The paralever rod and the linkage on the rear wheel are very likely to be damaged by stones being thrown up from the ground. When riding off-road, these are parts that are located at a very low position and thus often touch the ground. The new paralever guard from Touratech provides effective protection for this piece of equipment. Can be fitted easily with no tools.Color: black

040-1309

Cover ABS sensor

This small but extremely effective cover is available to protect the ABS sensor against damage.Material: high-quality stainless steel.

040-1319

Fender cover

Have you taken off the original fender? And now you have two horrible threads too many on your cardan?- We have a solution for you!A dainty shield to cover the two threads (suitable for all 4V-GS models).

040-3190 Fender cover

Rallye Mudguar, Protection

359358

Mudguard flap

- Efficient mudguard flap for rear wheel - Protects against dirty back and soiled luggage- Reinforces number plate- Powder- coated aluminium (black)- For R 1150 GS / R 1100 GS and R 850 GS

040-0281

Luggage rack extensionfor BMW R 850 GS/1100 GS/1150 GS

- 4 mm anodised aluminium- 30 mm wider- 80 mm longer- Additional space for your luggage roll- Many slots for fixing straps- Compatible with our TVP tail rack bag

051-1100

Luggage rack extension BMW R 1150 GS Adventure

- 4 mm anodised aluminium- 50 mm wider- 65 mm longer- Additional space for your luggage roll- Slots for fixing straps- Compatible with our TVP tail rack bag

051-1101

LL tool compartment cover for R 850 GS/1100 GS/1150 GS

Finally a replacement for the plastic tool compart-ment cover. Our design is made of anodised aluminium and is also lockable, so that nothing can go missing even when riding alone with the single seat.LL tool compartment cover

051-1110

BMW R850/1100/1150GS359358

Universal „Travel Bag“ for Pillion Seat

A unique solution for all luggage issues! Specially developed to suit almost any motorbike and designed for multi-purpose use. Because it is easy to attach and remove, our Universal Travel Bag is a flexible and ingenious alternative to fixed pannier systems, even for longer trips.

You will find more information on the Universal Travel Bag and the accessories on page 1194!

055-1461

Tank bag for BMW R80-R1150GSThe further development of our proven tank bag for the BMW R11xx GS models now offers an additi-onal reflective elastic strap on the side which can be used to hold e.g. your gloves during a short stop. Reinforcements in the side walls keep the tank bag absolutely in shape even when not full.The further details:• Capacity approx. 18 litres, expandable to approx. 25 litres by opening the zipper• Two new side pockets with 2-way zippers and optimised form. This prevents accidental actuation

of the turn flashers or horn when turning the handlebar.• Sturdy carrying handle• Two straps supplied with the bag allow it to be used as a rucksack• Map pocket (28 x 32 cm) attached to the bag by Velcro fasteners• Attached to the tank by snap closures for quick removal during refuelling• Optional rain cover available

Colour: blackSize: (L x W x H): approx. 31 x 29 x 22/32 cm

Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant.

Made in Germany by KAHEDO.

055-1302

Mudguard flap, tank bag

361360

Handlebar bag

Small, smart bag for all 22mm handlebars. This will let you keep small items within a hand‘s reach. Particularly well suited for bandages or a patch kit. The bag is secured with a plastic clip and two Velcro straps. Colour: black. Volume: approx. 1lDimensions (l x w x h): 8 x 37 x 5 cm

055-1230

Tail Rack BagLuggage rack

Versatile tail rack bag that fixes to the small luggage rack and offers extra storage capacity. Circular zip for even more capacity. The bag has a sponge rubber base and a reinforced interior. Two strong straps fasten the bag to the rack.Size approx. 29 x 21 cm, 13/23 cm high

055-1209

Rain hoodThe rain hood for the Touratech tank bags.

055-0069

Tank bag VP 45 R 850/1100/1150 GS/1150 Adventure

The VP 45 features two additional 10 litre side bags and thus offers a total storage capacity of 45 litres. The side bags have an ergonomic design as they are contoured to accommodate the rider‘s knees.

055-1062

BMW R850/1100/1150GS361360

Tail bag “Seat”

This versatile tail rack bag for the BMW offers 12 litres of carrying capacity. Tailor-made to the size of the tool box, the tail rack bag replaces the pillion seat and is fastened with two strong straps. The straps can be replaced and are fixed with two buckles. A circular zip expands the bag to 20 litres of capacity. The outside top zipped pocket takes all the oddments. There is an inside pocket, too. The rugged carrying handle turns the bag into an elegant piece of luggage. It comes supplied with two additional straps that can be clipped on the sewn on loops and convert the tail rack bag into a rucksack or shoulder bag. This tail bag R 850/1100/1150 GS replaces the pillion seat and has a strong rubber base for skid-proof attachment. Optional rain cover.Size: approx. 28 x 30 x 13 cm, expands to approx. 28 x 30 x 23 cm

055-1203 R 850/1100/1150 GS

055-1069 Rain hood

Tail rack bag pillion seatBMW R1150 GS Adventure

This versatile tail rack bag for the Adventure offers approx. 13 litres of carrying capacity. Tailor-made to fit the pillion seat and fastened with two strong straps. The straps can be easily removed and are fitted with two buckles. The bag features a sponge rubber base for non-slip limpet attachment. A circular zip expands the bag to 22 litres of capacity. The outside top zipped pocket takes all the oddments. There is an inside pocket, too. The rugged carrying handle turns the bag into an elegant piece of luggage. It comes supplied with two additional straps that can be clipped on the sewn on loops and convert the tail rack bag into a backpack or shoulder bag. Optional rain cover.Size: approx. 28 cm x 30 cm x 13cm, expands to approx. 28 cm x 30 cm x 23cm

055-1208055-1069 Rain hood

Tail bank TVP

Versatile tail rack bag that fixes to the small luggage rack and offers extra storage capacity. Circular zip for even more capacity.The bag has a sponge rubber base and a reinforced interior. Two strong straps fasten the bag to the rack.Size (enlarged capacity):approx. 30 x 16 cm, 23 cm highCapacity: approx. 8.5 l

055-1204 From teflon-coated CORDURA, thus water-rejecting and insensitive to dirt - simply HIGH TECH.

Tail bag, tank bag, bags

363362

Pannier Racks BMW R 1150 GS for ORIGINAL pannier case BMW R 1200 GS

This is something really special for BMW GS riders:The Pannier Racks BMW 1150 GS for ORIGINAL pannier case BMW R 1200 GSThe rack is made of 18 mm steel tube, and is attached to existing points. There is no need to re-position or extend the exhaust. A strut provides maximum stability even with heavy loads. - Enhances the enduro design- Pillion comfort not restricted- approx. same width on both sides (overall width: 94cm)- Suitable for track and off- road useORIGINAL pannier case BMW R 1200 GS: Only avalable from your BMW dealer. BMW order number: Case right: 7 680 850 / Case left: 7 680 849

051-0140

BMW R850/1100/1150GS363362

90,0 cm 98,0 cm

38 45

Aluminium case systemes

Zega Pro Topcase rack R1150GS / ADVThe special carrier for our ZEGA PRO Topcases.

Made entirely of stainless steel and specifically designed for the BMW’s attachment points, the Topcase rack is the perfect way to attach ZEGA PRO Topcases to your bike. The Topcase rack can be used on its own or in conjunction with our pannier system.

The available Topcases appear on page 1048.

040-5455 R1150/1100GS 041-5455 R1150GS Adventure

Zega Pro spezial system, premounted, frame stainless steel,

BMW R 1150/1100/850 GSOur favourite special system with Zega Pro cases. The left box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres). The overall width of the 38 litres special system is 90 cm. The overall width of the 45 litres special system is 98 cm.- with special stable luggage rack.- ready fitted fixing kits.- sturdy connecting bar.- original indicators can be re-used.- no exhaust extension necessary for original silencer.

052-3185 38/38 litres

052-3186 45/45 litres

Zega Pro *And-S* spezial system, premounted, frame stainless steelBMW R 1150/1100/850 GS

052-3187 38/38 litres052-3188 45/45 litres

365364

ZEGA PRO

ZEGA PRO AND-S

ZEGA PRO AND-Black

BMW R850/1100/1150GS365364

98,0 cm

ZEGA PRO

ZEGA PRO2

Zega Pro pannier system, premounted, frame stainless steelBMW R1150/1100/850 GS

The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been per-formed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMW R1150/ 1100/ 850 GS. Including pillion foot peg adjustment

Aluminium case systemes

Pannier System with: stainless steel rack

ZEGA Pro2 - 38/45 L 040-6035

ZEGA Pro2 - AND-S 38/45 L 040-6036

ZEGA Pro2 - AND-Black 38/45 L 040-6037

Complete information about the innovative aluminium case on page 1036 or www.touratech.com/zegapro2_en

Pannier System with: stainless steel rack

ZEGA Pro 38/45 L 052-3181

ZEGA Pro AND-S 38/45 L 052-3182

ZEGA Pro AND-Black 38/45 L 052-3183

ZEGA PRO2

367366

That BMW has sold more than 100000 R1100GS and R1150GS is a success story difficult to match. No other motorcycle design has inspired so many motorcyclists to travel the world. No other design is at the same time so unique and so versatile. However the good old GS is not getting any younger, and with so many R11GS on the road, many owners are looking for a distinctive new look, and also for something lighter and slimmer. TOURATECH has been working on this. The result is the new TB1100 / TB1150 ReVamp, a GS renewed while retaining all of its original strengths. TOURATECH has combined the excellent engine and chassis of the R1100GS and R1150GS with a fresh and modern design. Now every 4-valve GS owner has the opportunity to transform his or her GS into a dynamic riding machine of the new generation.With our kit, both the R1100 GS, R1150 GS and the ADVENTURE can be transformed quickly and eco-nomically into an authentic ReVamp. Naumann Design created the design; a new, narrower tank, together with new fairings, adding a stylish one-piece saddle and a windscreen with optimum aerodynamics for the comfort of the rider. ReVamp assembly time is estimated to be 6.5 hours by an experienced technician (except painting). It was designed to be accomplished without drilling even one hole. Restoring your GS to original likewise requires only 6,5 hours. Conversion of Adventure requires seat mounting parts (from the standard GS) which are listed in the instructions. Detailed English instructions can be downloaded from the website. The kit is comprised of: - 21 Liter tank - dual headlight unit with XENON high-beam and DE projector low-beam- forward support frame for the oil cooler, headlight unit, windscreen, and instrument cluster - new upper forward fender - side fairings for the tank, allowing many options for painting- seat, standard (87.5 cm is included with options of 82, 85, or 90 cm)- new tail-light unit and 4 new micro-indicators - TOURATECH IMO-100R electronic speedometer / tachometer- aerodynamically designed windscreen providing excellent protection - all associated hardware, detailed assembly instructions The price of this unique transformation kit for the 4-valve GS is ~2,999 € (unpainted, price for European costumers, incl. tax). The kit can naturally be complemented with other equipment of your choice to suit your own use of the bike. Suggestions: TOURATECH luggage racks (for aluminium panniers) remain perfectly compatible with the ReVamp kit. Adding Öhlins shock absorbers, Magura handlebar, oil-radiator guard and Continental TKC 80 tyres, it becomes a great off-road machine. A special tankbag which allows refueling without removal and a narrow rear luggage rack in line with the ReVamp ‚s design will soon be available. However equipped, however you use it, there is one thing we can assure you of: the ReVamp will give your old familiar GS a new feel, and the utmost riding pleasure!

BMW R850/1100/1150GS367366

1

3

2

321

Kits:R 850/1100 GS ReVamp kit 360-0011 (includes standard seat, see options below)

R 1150 GS/Adventure ReVamp kit 360-0021(includes standard seat, see options below) Please select the suitable options for your ReVamp.(options at time of initial order only).

ReVamp Seat360-0503 Extra Low, 82 cm (exchange with Standard)360-0502 Low, 85 cm (exchange with Standard)360-0504 High, 90 cm (exchange with Standard)

WRP handlebar kit

WRP handlebar kit (flat)For BMW heated grips with tapered WRP handlebars and clamps.

041-0904

TT-Enduro handlebar kit (high)For BMW heated grips with tapered TT-Enduro handlebars and clamps.

041-0906

ReVamp tank bag

About 20 L capacity, design allows access to fuel filler without removing the bag. Manufactured to Toura-techs customary high quality (Cordura and Teflon)

055-1110

ReVamp tank bag rain cover

055-0069

Comparison: R1150 GS seat height with original seat- in low position 84 cm- in high position 85 cm

Garmin GPS II/III/V ReVamp R1150 GS (GPS mount and antenna not included/ external antenna only)

For original instruments

360-0444 1150GS with FID*

360-0446 1150GS without FID**Fuel/Information Display

ReVamp luggage rack

Perfect for carrying smaller pieces of luggage. Made of aluminium with many slots for lashing down.

051-1120

All of our pannier systems for the 4-valve GS also fit the ReVamp versions.

Please note that many other parts from our

Revamp

range fit the ReVamp.

369368

ReVamp

Xtreme

BMW R850/1100/1150GS369368

ReVamp

The ReVamp stands out by offering unlimited driving pleasure in almost any terrain. Because of its high agility and manoeuvrability, the ReVamp is the perfect, light, sporty two-cylinder travelling enduro. To meet this demand even better we can now offer you the ReVamp EXTREME kit with a 41 litre tank. The Extreme kit includes all the parts described on page 412. Instead of the 21 litre tank and lateral tank covers you will receive our tried and tested 41 litre tank designed for long-distance journeys. With a ReVamp EXTREME you will not only be well prepared for travelling to far away continents but also for a weekend trip to the Black Forest. Naturally, the “EXTREME” can be further equipped with many items from our comprehensive ReVamp and 1100/1150GS ranges to suit your individual requirements. Please have a look at page 459 (seat and cockpit plate) before ordering. On our test ride to Bolivia we could test the benefits of this conversion kit under the most extreme conditions.

ReVamp EXTREME - R850/1100GS360-0013

ReVamp EXTREME - 1150GS/Adventure360-0023

Revamp Extreme