bloom product numbering convention
TRANSCRIPT
Bloom Product Numbering Convention
BPCN11 Bloom Engineering Company, Inc.
www.bloomeng.com
CAUTION: The improper use of combustion equipment can result in a condition hazardous to people and property. Users are urged to
comply with National Safety Standards and/or Insurance Underwriters recommendations
Designation of a Bloom product is by a nine digit code.
XXX Y - ZZZ - WW
(e.g. 1024 - 060 - 02)
Meaning
XXX First Three Digits of the
Burner Series (Table 3)
Y Fuel Type (Table 1)
ZZZ Size (Table 2)
WW Spare Part Number
Y Designation Fuel Oil Tip Description*
0 Gas Only --
1 Gas & Oil Retractable ET (1800 Series) tip
2 Gas & Oil Fixed ET (1800 Series) tip
3 Oil Only Fixed ET (1800 Series) tip
4 Oil Only TTA (1850 Series) tip
5 Oil Only LP (1900 Series) tip
6 Gas & Oil LP (1900 Series) tip
7** Oil Only Retractable ET (1800 Series) tip
8 Gas & Oil Retractable TTA (1850 Series) tip
9 Special --
*ET: Emulsion Tip, TTA: Tip Type Atomizer, LP: Low Pressure
**For HTR burners (2000 and 2100 series) the “7” indicates direct
spark ignition
Table 1– Fuel Type (Y)
2
Numbering Convention Bulletin
Table 2 - Size Designations (ZZZ)
CAUTION: The improper use of combustion equipment can result in a condition hazardous to people and property. Users are urged to
comply with National Safety Standards and/or Insurance Underwriters recommendations
Bloom Engineering Company, Inc.
ZZZ Explanation XXX Burner
Series*
Nominal Air Connection (I.D.) [in]
102 (1020) 120 (1200) 136 (1360) 140 (1400) 143 (1430) 146 (1460) 147 (1470) 148 (1480) 149 (1490) 150 (1500) 172 (1720) 173 (1730) 184 (1840) 200 (2000) 210 (2100)
Port Diameter [in]
103 (1030) 123 (1230) 153 (1530) 161 (1610)
Capacity [100,000 Btu/hr]
110 (1100) 115 (1150) 165 (1650)
Capacity [Gal/hr]
180 (1800) 181 (1810) 182 (1820) 183 (1830) 185 (1850) 186 (1860) 187 (1870) 190 (1900)
Part Number (WW)
The “WW” designation is used mostly for spare parts on existing equipment. Contact
Bloom’s spares department (412-693-4219), or look at burner specific catalogs to determine
part numbers.
Omission of “WW” indicates a complete burner assembly.
Table 2 explains the meaning of the “ZZZ” designation, and lists burners series that use that designation. For example, for a
1480 series burner, the “ZZZ” represents the Nominal Air Connection (I.D.) measured in inches.
Note: For radiant tube burner (23**) and regenerative burner (1100, 1150) numbering conventions, please refer
to the respective product catalogs.
3
Numbering Convention Bulletin
CAUTION: The improper use of combustion equipment can result in a condition hazardous to people and property. Users are urged to
comply with National Safety Standards and/or Insurance Underwriters recommendations
Bloom Engineering Company, Inc.
Examples
1473-024-02
1230-049-01
1619-026
*Because there is no part number specified, this designation refers to a
complete burner assembly.
XXX 1470 Series Hot Combustion
Air Burner
Y Oil Only with a fixed 1800
series oil tip
ZZZ 2 1/2” I.D Combustion Air
Connection
WW Baffle
XXX 1230 Series
Y Gas Only
ZZZ 49” Port Diameter
WW Body
XXX 1610 Series Burner
Y Unique design or fuel
ZZZ 26” Port Diameter
WW None Specified*