blood collection system safety without compromise · colour differentiation of the safety cap •...
TRANSCRIPT
Safety without compromise Blood Collection System
Regular wall
Thin wall
Terumo thin wall
Reduced penetration force > more patient comfort
Venoject II Ultra ThinWall Needle (21G)
Competitivebrand needle (21G)
POINT BEVEL HEEL DRAG
Safety meets quality
VENOJECT® needle: the reference needle for more comfort and quality
VENOJECT® multi-sample needles used in combination with VENOSAFE™ and VENOJECT® tubes optimise patient’s com-fort during venepuncture. Due to their sharp tip and specific, double bevel design, tissue damage and thromboplastin release is minimal and trauma during incision very low. The excellent needle coating allows the needle to travel smoothly from the moment of penetration until its withdrawal.
QUICK Safe-TE holder: safety without compromise
Following the increasing safety awareness, also in blood collection, Terumo responds to the market’s safety requirements by develo-ping an excellent accessory for phlebotomy - the QUICK Safe-TE holder for multisample needles. The QUICK Safe-TE holder is a comfortable, easy-to-use and ergo-nomic product designed to facilitate blood drawing and to be safely discarded.
A special valve design and composition reduces the contamination risk by tightly closing the distal end of the needle each time a tube is removed - VENOJECT® valves are recognised world-wide for their excellent resealing properties. VENOJECT® needles allow increased blood-flow rates due to their larger inner diameter and significantly decrease risks of haemolysis during venepuncture - ensuring consistently reliable test results.
VENOSAFE™ QUICK FIT holder
The ergonomic, easy-to-use QUICK FIT system significantly improves the safety and comfort for the phlebotomist and patient.The QUICK FIT bayonet ensures a very quick and safe needle inser-tion and release and cuts down working time. It allows multiple usage, hence decreasing costs and waste disposal.
VENOSAFE™ tube: the ultimate answer to the increasing need for safe, efficient and highly reliable blood collection systems
VENOSAFE™ consists of a glass-clear PET tube with a patented gas barrier and a safety closure composed of a cap and an inner stopper part. The cap functions like a safety shield during opening and reclosing. The inner stopper part perfectly seals the tube and guarantees a smooth blood collection and sampling. Draw marks improve comfort during blood collection and lab efficiency by assuring correct blood/additive ratios.
Higher safety standards and increased automation in laboratory procedures require a much higher performance of blood collection vessels. The combination of VENOSAFE™ tubes, VENOSAFE™ holders and VENOJECT®
needles optimises the patient’s comfort and represents the quickest, easiest and one of the safest ways of blood collection. VENOSAFE™ tubes using the well-proven Terumo PET technology guarantee the absence of effects towards clinical parameters over their whole lifetime.
Performance enhancing laboratory solutions
In order to meet the increasing demand for standardisation of the laboratory environment and persistent demand for ultimate safety solutions, Terumo developed the VENOSAFE™ tube, the third generation of its outstanding clinical test systems combining the proven PET technology of VENOJECT® II with the excellent safety features for the benefits of the user and the patient. VENOSAFE™ tubes are Terumo’s contribution to reduce the risk of contamination for phlebotomists and doctors and at the same time improve the sample turnaround-time and test results of the clinical laboratory.
A history of research and development
Colour differentiation of the safety cap
• Clear identification of tubes and necessary analyses ––> eases phlebotomists’ work
Glass-clear, unbreakable PET with patented gas barrier and light weight
• High safety• Always accurate, standardised filling of tubes ––> cost saving, increased comfort for the patient• Highly ergonomic• Guarantees reliable and visual observation of the sample
Benefits for blood collection
Very smooth entry of the distal end of the needle into the soft stopper part of the VENOSAFE™ tube
• Easy, quick and highly ergonomic successive blood collections• Improves comfort for the patient
Draw marks for all draw volumes on both sides of the label
• Eases phlebotomists’ work• High accuracy of analysis ––> cost saving
VENOSAFE™ Blood Collection Systems
Better grip on VENOSAFE™tube bottom for precise holdduring venepuncture
• Eases phlebotomists’ work
Clear colour indication on labels and transparent safety cap forpartial draw tubes
• No double checking ––> eases phlebotomists’ work
VENOSAFE™ Laboratory Systems
Safety cap
• Improves safety during handling• Easy to remove • Reliable manual or automated recapping• Colour-coding (ISO 6710:1995) for safe, reliable identification, handling and analysis
Glass-clear, unbreakable PETwith patented gas barrier andvery light weight
• Guarantees reliable visualisation of the sample• Ensures high accuracy of test results• Lower transport and disposal costs
Clot Activator (visible, white wall-coating)
• Ensures fast, uniform clotting for a higher serum yield
Benefits for the clinical laboratory
Full rubber top
• Considerably prolongs the lifetime of analyser samplers • Special coating reduces cell hang-up • Reduces cost
VENOSAFE™ Blood Collection Systems
Combination of VENOSAFE™ tube and safety capwithin automation standards
• Ensures high turnaround time of samples• Cost efficient
Superior OLEFIN GEL
• Guarantees high barrier properties during several days• Minimal interference with clinical analytes • No dispersion of oil-drops ––> prolongs the lifetime of analysers
Special packaging for coagulation tubes
• Guarantees the correct ratio of blood and additive during the whole shelf life and ensures extremely reliable haemostasis analyses
• Safety for the patient
Draw marks on both sides of the label for all draw volumes
• High accuracy of analysis• Improves lab efficiency and saves cost
Clear colour indication on labels and transparent safety cap for partial draw tubes
• Improves lab efficiency
VF-052SP 5 2 Clot activator 12x100
VF-053SP 5 3 Clot activator 12x100
VF-054SP 5 4 Clot activator 12x100
VF-076SP 7 5.5 Clot activator 12x100
VF-109SP 10 9 Clot activator 12x100
VF-052SFX 5 2 Na-Fluoride+K2-Oxalate 12x100
VF-053SFX 5 3 Na-Fluoride+K2-Oxalate 12x100
VF-054SFX 5 4 Na-Fluoride+K2-Oxalate 12x100
VF-052SFC 5 2 FC-mixture 12x100
VF-053SFC 5 3 FC-mixture 12x100
VF-054SFH 5 4 Na-Fluoride+Na-Heparin 12x100
VF-109SFX07 10 9 Na-Fluoride+K2-Oxalate 12x100
VF-054SAS 5 3.5 Gel+Clot activator 12x100
VF-075SAS 7 4.5 Gel+Clot activator 12x100
VF-106SAS 10 6 Gel+Clot activator 12x100
VF-108SAS 10 8 Gel+Clot activator 12x100
VF-054SAS02 5 3.5 Gel+Clot activator 12x100
VF-075SAS02 7 4.5 Gel+Clot activator 12x100
VF-106SAS02 10 6 Gel+Clot activator 12x100
VF-108SAS02 10 8 Gel+Clot activator 12x100
VF-052SHL 5 2 Li-Heparin 12x100
VF-053SHL 5 3 Li-Heparin 12x100
VF-054SHL 5 4 Li-Heparin 12x100
VF-076SHL 7 5.5 Li-Heparin 12x100
VF-109SHL 10 9 Li-Heparin 12x100
VF-054SH 5 4 Na-Heparin 12x100
VF-109SH 10 9 Na-Heparin 12x100
VF-054SAHL 5 3.5 Gel+Li-Heparin 12x100
VF-075SAHL 7 4.5 Gel+Li-Heparin 12x100
VF-106SAHL 10 6 Gel+Li-Heparin 12x100
VF-108SAHL 10 8 Gel+Li-Heparin 12x100
VF-054ST 5 4 Thrombin 12x100
VF-054SADK 5 3.5 Gel+K2-EDTA 12x100
VF-075SADK01 7 5 Gel+K2-EDTA 12x100
VF-108SADK 10 8 Gel+K2-EDTA 12x100
Code Tube Volume (ml) Draw (ml) Additive Packaging
Biochemistry
Glycaemia
(Serum)
Biochemistry
(Serum-Gel)
Biochemistry
(Plasma)
Biochemistry
(Plasma-Gel)
Biochemistry
(Emergency)
Viral Load
References
Code Tube Volume (ml) Draw (ml) Additive Packaging
VF-076SCPD 7 4.8 CPD-A Solution 12x50
VF-076SACD 7 4.8 ACD-B Solution 12x50
VF-109SACD 10 7.8 ACD-B Solution 9x50
VF-052SDK 5 2 K2-EDTA 12x100
VF-053SDK 5 3 K2-EDTA 12x100
VF-054SDK 5 4 K2-EDTA 12x100
VF-076SDK 7 5.5 K2-EDTA 12x100
VF-109SDK 10 9 K2-EDTA 12x100
VF-052STK 5 2 K3-EDTA 12x100
VF-053STK 5 3 K3-EDTA 12x100
VF-054STK 5 4 K3-EDTA 12x100
VF-052SBCS 5 1.8 Buffered Na3-Citrate 3,8% 15x10
VF-052SBCS07 5 1.8 Buffered Na3-Citrate 3,2% 15x10
VF-053SBCS 5 2.7 Buffered Na3-Citrate 3,8% 15x10
VF-053SBCS07 5 2.7 Buffered Na3-Citrate 3,2% 15x10
VF-054SBCS 5 3.6 Buffered Na3-Citrate 3,8% 15x10
VF-054SBCS07 5 3.6 Buffered Na3-Citrate 3,2% 15x10
VF-053SCTAD 5 2.7 CTAD-solution 15x10
VF-054SCTAD 5 3.6 CTAD-solution 15x10
VF-053SJ 5 2.4 Buffered Na3-Citrate 3,8% 15x10
VF-053SJ07 5 2.4 Buffered Na3-Citrate 3,1% 15x10Closed sedimentation system:
VT+ESRV - 1.28 Buffered Na3-Citrate 3.2% 10x100
Table rack for VT+ESRV: RA+ESRV
1
VF-109SURI 10 9 none 12x100
VF-054SLI 5 4 none 12x100
VF-109SLI 10 9 none 12x100
Blood Banking
Hematology
Coagulation
Sedimentation
Uridraw
Liquidraw
Single piece pack solutions available, please contact your local Terumo office.
Shelf life:Gel-items 24 months.Thrombin and Blood Banking items 12 months.VT+ESRV 12 months.All other items 18 months
For further specifications (e.g. transparent label, colour differentiation, etc.) please send your enquiries to [email protected] or consult our website: www.terumo-europe.com/laboratory.html This reference table is subject to changes.Automatic ESR Reader Systems And Decapping Devices on Request
Code Tubing Packaging
MN*SVS21BQ30 300 mm 16x50
MN*SVS23BQ30 300 mm 16x50
MN*SVS21BQ18 180 mm 16x50
MN*SVS23BQ18 180 mm 16x50
MN*SVS21BQ09 90 mm 16x50
MN*SVS23BQ09 90 mm 16x50
Code Tubing Packaging
MN-SV21Q 300 mm 16x50
MN-SV23Q 300 mm 16x50
Code Packaging
XX-MN2000Q 20x100
Code Description Packaging
XX-VF10HGSQVENOSAFE™
Holder40x25
XX-VFHQSAFVENOSAFE™Safety Holder
10x100
XX-VFHBQSUVENOSAFE™
Single Use Holder1x1500
XX-ORGHQBacT/ALERT®
Holder10x10
XX-ORGIBacT/ALERT®
INSERT10x10
XX-VF10HGSQ4URINE TUBE
Holder40x25
Code Description Packaging
UN-2038Q 0.9 x 40 mm (blunt) 20x100
Code Description Packaging
MN-2038MQ 0.9 x 40 mm 20x100
MN-2025MQ 0.9 x 25 mm 20x100
MN-2138MQ 0.8 x 40 mm 20x100
MN-2125MQ 0.8 x 25 mm 20x100
MN-2238MQ 0.7 x 40 mm 20x100
MN-2225MQ 0.7 x 25 mm 20x100
Biological samples and blood collection sharps, in particular, should be considered as potentially infectious and should, therefore, be handled with care. All relevant instructions for use, as well as the policies and procedures of your facility, should be followed closely. Never recap used needles, but dispose them into approved biohazard containers.
Further items with pre-assembled holders are also available, please send your enquiries to [email protected] consult our website: www.terumo-europe.com/laboratory.html
Accessories
QUICK FIT System
Holders
VENOJECT® Luer-Adapter
Multi-Sample Needles
Urine Sampler
Winged Blood Sampling Set with SURSHIELD® Protector
Winged Blood Sampling Setnot CE-marked
Code Description Packaging
MN-2038M 0.9 x 40 mm 20x100
MN-2025M 0.9 x 25 mm 20x100
MN-2138M 0.8 x 40 mm 20x100
MN-2125M 0.8 x 25 mm 20x100
MN-2238M 0.7 x 40 mm 20x100
MN-2225M 0.7 x 25 mm 20x100
Code Packaging
XX-MN2000 20x100
Code Description Packaging
XX+VF00S DIFF-SAFE® 10x1000
Code Description Packaging
XX+TCTourniquetfor adults
100
XX+TCB1Tourniquetfor children
100
XX+TCB2Tourniquet
for babies (blue)100
XX+TCB3Tourniquet
for babies (red)100
Code Description Packaging
XX-VF010HGS VENOSAFE™ HOLDER 40x25
XX-VFHGLAVENOSAFE™ HOLDER
with luer adapter1x500
Code Tubing Packaging
MN*SVS21BW30 300 mm 16x50
MN*SVS23BW30 300 mm 16x50
MN*SVS21BW18 180 mm 16x50
MN*SVS23BW18 180 mm 16x50
MN*SVS21BW09 90 mm 16x50
MN*SVS23BW09 90 mm 16x50
Code Tubing Packaging
MN-SV21 300 mm 16x50
MN-SV23 300 mm 16x50
Code Description Packaging
XX+Q2500TERUSAFE DISPOSAL BOX 2.5l, rectangular
45
XX+Q2510TERUSAFE DISPOSAL
BOX 2.5l, round*45
XX+Q2010TERUSAFE DISPOSAL
BOX 2l, round*65
XX+Q1510TERUSAFE DISPOSAL
BOX 1.5l, round*80
XX+Q0001TERUSAFE ADHESIVE
ADAPTER50
* can be used with adhesive adapter
TÜV/GS approved
Screw System
VENOJECT® Luer-Adapter
Further items with pre-assembled holders are also available, please send your enquiries [email protected] or consult our website: www.terumo-europe.com/laboratory.html
VENOJECT®Multi-Sample Needles
Biological samples and blood collection sharps, in particular, should be considered as potentially infectious and should, therefore, be handled with care. All relevant instructions for use, as well as the policies and procedures of your facility, should be followed closely. Never recap used needles, but dispose them into approved biohazard containers.
Winged Blood Sampling Set
Holders
Winged Blood Sampling Setwith SURSHIELD® Protector
Diff-Safe®
Tourniquets
Disposal Boxes
0197
0197
0123
The VENOSAFE™ Blood Collection System
of Terumo consists of a glass-clear PET tube with a patented gas barrier and a safety closure with a cap and inner stopper part.
This well-established blood collection sys-tem reduces the contamination risk, im-proves the patient’s comfort and ensures fast and efficient collection and testing procedures.
Safety without compromise
The Terumo QUICK FIT range offers a flexible solution for the most appro-priate safety management in any situation.
The elements of the QUICK FIT range like the QUICK FIT holder, the QUICK Safe-TE holder, the QUICK FIT multi-needle, the winged blood sampling set with protector and also the TERUSAFE sharps containers fit perfectly together.
Safety without compromise
... and so easy!
www.terumo-europe.com
TERUMO®, VENOJECT® and SURSHIELD® are registered trademarks of TERUMO CORPORATION
VENOSAFE™ is a trademark of TERUMO EUROPE N.V.
BacT/ALERT® is a registered trademark of bioMérieux
DIFF-SAFE® is a registered trademark of ALPHA SCIENTIFIC
® Registered Trademark Published by Terumo Europe N.V. LA 07GB-0202FK-VI0(02.11)E
Laboratoires Terumo France S.A. Parc Ariane - Bât. Uranus 1, rue Hélène Boucher 78284 Guyancourt Cedex, France Tel.: +33 130 96 13 00Fax: +33 130 43 60 85
Terumo Deutschland GmbH Ludwig-Erhard-Strasse 665760 Eschborn, Germany Tel.: +49 6196 80 230 Fax: +49 6196 80 23 200
Terumo Deutschland GmbH Zweigniederlassung Spreitenbach Bodenäckerstrasse 38957 Spreitenbach, Switzerland Tel.: +41 56 419 10 10 Fax: +41 56 419 10 11
Terumo Europe España SL Avda. Juan Carlos I, Nº 13 - 7ª Planta Edificio Torre La Garena 28806 Alcalá de Henares (Madrid),Spain Tel.: +34 9021 01 298 Fax: +34 9021 01 358
Terumo Corporation 44-1, 2-chome, HatagayaShibuya-ku, Tokyo 151-0072,JapanTel.: +81 3 3374 8111 Fax: +81 3 3374 8196
European Headquarters
Terumo Europe n.v.Interleuvenlaan 403001 Leuven, BelgiumTel.: +32 16 38 12 11Fax: +32 16 40 02 49
European Offices
Terumo Europe n.v.Benelux Sales DivisionInterleuvenlaan 403001 Leuven, BelgiumTel.: +32 16 39 25 80Fax: +32 16 39 25 99The Netherlands:Tel.: 0800 0220396Fax: 0800 0220414
Terumo Italia S.r.l. Via Simone Martini, 143 / 145 00142 Roma RM,Italy Tel.: +39 0651 96 14 20 Fax: +39 0650 30 407
Terumo Sweden AB Nya Varvet, Byggnad 90 Sven Källfelts Gata 18 426 71 Västra Frölunda,Sweden Tel.: +46 3174 85 880 Fax: +46 3174 85 890
Terumo DenmarkFilial of Terumo Sweden AB Tel.: +45 7020 93 80 Fax: +45 7020 94 80
Terumo UK Ltd TamesisThe CausewayEgham, SurreyTW20 9AW, United Kingdom Tel.: +44 1784 476 200Fax: +44 1784 476 201
Terumo Europe n.v.Moscow Representative OfficeJSC Northern Tower13Fr., 10 Testovskaya StreetMoscow 123317, RussiaTel.: + 7 495 988 4740Fax: + 7 495 988 4739
Addresses subject to change,please consult our Website.